Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
product overviewpco.edge series
active cooled
sCMOScameras
2
Top feature – Low light mode
When the low light mode is activated, both the high and low gain A/D converter are used as high gain, which means they digitize low intensity pixel values only. The signal within each pixel is simultaneously digitized by two separate A/D conversion units and added up, which is referred to as correlated multi sampling (CMS). This correlation causes a major reduction of the readout noise, though the usable intrascene dynamic range of the sensor is reduced.
Top feature – Lightsheet scanning mode
The PCO lightsheet scanning mode is a special readout mode dedicated to lightsheet microscopy. It is based on the rolling shutter mode in which the readout direction of the sensor is from top to bottom. The standard line time value is 12 μs and it can be set from this camera-specific line time up to 2 ms. Compared to the standard operation mode, the lightsheet scanning mode enables the selection of the parameters “Line Time” and “Exposure Lines”. This guarantees an optimized synchronization to an existing lightsheet setup which has no selectable speed or timing. It is possible to set a delay prior to the exposure start (“delay lines”). For more information on the corresponding SDK functions, please read our pco.sdk instruction manual.
pco.edge series
The pco.edge series represents the high-end cameras within PCO‘s scientific CMOS (sCMOS) camera product portfolio. They provide significant benefits in a broad field of applications due to unprecedented imaging capabilities. The pco.edge cameras are based on temperature-stabilized, high-performance sCMOS image sensors enabling an extremely low readout noise, wide dynamic range, high frame rates and resolution over a large field of view. pco.edge cameras are available with versatile optional features like low light mode or lightsheet scanning mode which even increase the cameras’ performance for dedicated applications.
Exp
osu
reLi
nes
LineTime
L1
L2
L3
L4
L5
L6
L7
timeT1 T2 T3 T4 T5 T6 T7 T8 T9 T10 T11T0
readoutdirection
End Exposure
resulting Exposure Time =Line Time x Exposure Lines
selectable parameter: Tx Line Time (12 µs ... 2 ms) Lx Exposure Lines (1 ... 2048)
Start Exposure(only via SDK)
high gain ADChigh gain ADC
low readout noisee-
low gain ADChigh gain ADC
high dynamic rangee- merge
correlatedmulti sampling
3
technical table pco.edge 26pco.edge 10
bi
interface CLHS FOL USB 3.1 Gen 1 CLHS FOL
sensor technology scientific CMOS (sCMOS),monochrome
back illuminated scientific CMOS
(bi sCMOS), monochrome
resolution [pixel] 5120 x 5120 4432 x 2368
pixel size[µm] 2.5 x 2.5 4.6 x 4.6
max. frame rate @ full resolution [fps] 150 6 120
max. pixel rate [MPixel/s] 4608 157 1467
peak quantum efficiency [%] 72 85
min. read noise1 [e-] 3.2 2.3 0.8
max. dynamic range 2000 : 1 25,000 : 1
shutter type2 GS RS
sensor cooling3 active cooling air & water
active cooling air & water
additional options double shutter, lens control
-lightsheet scanning mode4,
lens control
dimensionsH x W x L [mm] 95 x 90 x 109 85 x 80 x 109 95 x 90 x 109
camera housing
more details
Top feature – Camera Link HS
Several standardized protocols are available, and Camera Link HS is one of the leaders in speed, reliability, and bandwidth. Camera Link High Speed (Camera Link HS or CLHS) is a mature and robust interface standard for industrial cameras and systems. It evolved from Camera Link, the vision industry’s first standard camera interface protocol. Camera Link HS is poised to provide significantly expanded capability in upcoming releases, with changes that promise to make it the standout choice for camera interfacing.
4
technical table pco.edge 5.5pco.edge 4.2
bipco.edge 4.2
bi UV
interface CLHS FOL Camera Link USB 3.0 USB 3.1 Gen 1
sensor technology scientific CMOS (sCMOS),monochrome or color
back illuminated scientific CMOS (bi sCMOS),
monochrome
resolution [pixel] 2560 x 2160 2048 x 2048
pixel size[µm] 6.5 x 6.5 6.5 x 6.5
max. frame rate @ full resolution [fps] 100 30 40
max. pixel rate [MPixel/s] 572 320 184
peak quantum efficiency [%] 60 95
min. read noise1 [e-] 1.0 1.1 1.0 1.0
max. dynamic range 30,000 : 1 27,000 : 1 30,000 : 1 26,667 : 1
shutter type2 RS, GS, GR RS
sensor cooling3 active cooling air, optional: water
active cooling air & water
active cooling air & water
additional options lens controllightsheet
scanning mode4 -lightsheet scanning mode4,
low light mode
dimensionsH x W x L [mm] 76 x 70 x 122 76 x 70 x 99 85 x 80 x 109
camera housing
more details
High performance through optimized mechanics
The pco.edge series comes in a sophisticated mechanical housing. An optimized cooling concept makes it possible to thermally stabilize the sensor at low temperatures. This ensures a neglectable low dark current and thus an increase in image quality. The cooling takes place either by means of an external water cooling, by an optimized air flow within the camera, or both. A special design of the cooling system protects the sensor from vibrations and guarantees unimpaired imaging performance.
5
technical table pco.edge 4.2pco.edge 4.2
LT pco.edge 3.1
interface CLHS FOL Camera Link USB 3.0 USB 3.0 USB 3.0
sensor technology scientific CMOS (sCMOS),monochrome
scientific CMOS (sCMOS),
monochrome
scientific CMOS (sCMOS),
monochrome or color
resolution [pixel] 2048 x 2048 2048 x 2048 2048 x 1536
pixel size[µm] 6.5 x 6.5 6.5 x 6.5 6.5 x 6.5
max. frame rate @ full resolution [fps] 100 40 40 50
max. pixel rate [MPixel/s] 548 545 220 220 408
peak quantum efficiency [%] 82 82 60
min. read noise1 [e-] 0.8 0.9 0.8 0.8 1.1
max. dynamic range 37,500 : 1 33,000 : 1 37,500 : 1 37,500 : 1 27,000 : 1
shutter type2 RS RS, GR RS, GR RS, GS, GR
sensor cooling3 active cooling air, optional: water
active cooling air & water
active cooling air
active cooling air
additional options lens controllightsheet
scanning mode4 - - -
dimensionsH x W x L [mm] 76 x 70 x 122 76 x 70 x 99 76 x 70 x 99 76 x 70 x 99
camera housing
more details
1 The readout noise values are given as median (med). All values are raw data without any filtering. 2 RS = Rolling Shutter | GS = Global Shutter | GR = Global Reset 3 air = air forced with fan | water = external water connection 4 Selectable via software.
subject to changes without prior notice | lens is sold seperately ©PCO AG, Kelheim | pco.edge series overview | v1.01
contact
official PCO sales partner
pco america+1 866 678 [email protected]
pco asia+65 6549 [email protected]
pco europe+49 9441 2005 [email protected]
pco china+86 512 [email protected]
ISO 9001:2015
for application stories please visit our website