Calibre · module makes better use of space by more efficiently storing and maintaining files, binders, office supplies and other articles as compared to a traditional 3 planning

Price ListMay 2021

Calibre

Table of Contents

Introduction Knoll and Sustainable Design 2

Lateral File Planning Overview 3

Lateral File Sample Bid Technical Specifications 8

Built-to-Spec Lateral File Considerations 11

Ordering Calibre Files and Storage 12

Ordering the Calibre Pedestal 13

Calibre Files and Storage 14

Calibre Pedestal 17

Calibre File Collection Calibre Front Lateral Files - Preconfigured 19

Calibre Front Hybrids 38

Calibre Front Cabinets 41

Lateral File Worksurface Tops 48

Calibre Add-on Modules 54

Calibre Bookcases 55

Planning Built-to-Spec Calibre Lateral Files 60

Built-to-Spec Worksheet 61

Calibre Front Lateral Files- Built-to-Spec 62

Calibre Front Lateral Files with Individual Locking Drawers 69

Laminate Front Lateral Files 74

Series 2 Front Lateral Files 75

Calibre File Accessories 76

Calibre Front Pedestals Calibre Pedestals 78

Calibre Front Pedestals withIndividual Locking Drawers

Calibre Pedestals 96

Calibre Pedestal Accessories 101

Calibre Front Storage Towers 159 Wide Storage Towers 104

249 Wide Storage Towers 110

309 Wide Storage Towers 119

Calibre Tower Accessories 121

Wall Mounting of Knoll Products 128

Alpha-Numeric Index 130

Selling Policy 134

KnollKey Lock Program 137

General Ordering Information 138

Calibre

PLCAL04211

Copyright Q 2021 Knoll, Inc.All rights reserved.All prices effective 05/15/2021.

Knoll and Sustainable Design

Each year Knoll sets key initiatives in the journey to sustainability. Focused on our impact to people and planet, Knoll reports material

health product attributes and sets operational targets to reduce greenhouse gas emissions, waste generation and water use (in our North

American facilities.)

Material transparency is a core Knoll sustainable design value, enabling us to optimize the design and performance of our products.

Our material health program utilizes independent third-party certifications that provide an impartial and trustworthy foundation for

industry-wide transparency. Certification by respected third parties ensures that all manufacturers are held to the same high standards.

Knoll certifications include: Forest Stewardship Council (FSCt), Intertek’s Clean Air Program, Business and Institutional Furniture

Manufacturer’s Association (BIFMA) LEVELt certification, International Living Future Institute’s (ILFI) Declare labelling and Certified

Environmental Product Declarations. In addition, Knoll is aligned with the U.S. Green Building Council and can help organizations

achieve credits for Leadership in Energy and Environmental Design (LEEDt), WELL and the Living Building Challenge (LBC) building

certifications.

In our manufacturing operations, we focus on efficiency and impact. Knoll Office and Knoll Europe manufacturing locations are ISO

14001:2015 certified. Knoll sets objectives and targets to reduce energy, water and waste. These initiatives are part of a long-term

strategy to further reduce energy consumption and lower our carbon footprint.

We also believe in helping our customers find viable options when decommissioning furniture or other related assets. ANEW’s Full

Circle Program, in partnership with Knoll, allows customers to leverage buy-back and re-sale programs as well as explore options for

repurposing or recycling that mitigate landfill impact through energy-from-waste conversion.

For more information about Knoll and sustainable design, visit www.knoll.com/environment.

2

Lateral File Planning OverviewCalibre Planning and Technical Specifications

Calibre files are available inpre-configured and built-to-specmodels that incorporate a flexible1.59 planning module to optimize thebest use of space within a case. Mostapplications can be satisfied withpre-configured files, which areavailable in the most commonconfigurations. For specialapplications Calibre can be orderedbuilt-to-spec, which allowsthousands of drawer and doorconfigurations.

Lateral Files, Pre-configuredCalibre pre-configured files areavailable in 10 heights and 3 widths.All feature the use of a 1.59 verticalplanning module. The 1.59 planningmodule makes better use of space bymore efficiently storing andmaintaining files, binders, officesupplies and other articles ascompared to a traditional 39 planningmodule. There are 9 drawer/doormodules heights available to supportfront-to-back or side-to-side filing ofletter, legal, A4, JIS, standardbinders and EDP paper sizes.

Lateral Files, Built-to SpecCalibre, built-to-spec files allow awide variety of drawer and shelfoptions. Through the combination ofthe 10 case heights and the 9 drawermodules, thousands of custom caseconfigurations are possible to meetany special application.

Hybrids Pre-configuredHybrid storage units combine hingeddoors to store binders and supplieswith 129 file drawers to supportfiling. Hybrids are available inheights of 55.59, 639 and 64.59 inwidths of 309 and 369.

Cabinets Pre-configuredA variety of pre-configured storagecabinets with adjustable shelves areavailable with or without doors in 6heights and 2 widths. Think of usinga Calibre cabinet without doors whenyou want to have the appearance of abookcase when aligning a cabinetnext to lateral files. Cabinets havethe same base detail (1 1/29 tall) oflateral files, as well as the sameoverall depth of 189. A Calibrebookcase on the other hand is only

159 deep and has a 2 1/169 high base.

Doors are available in standardCalibre style. Locks are optional formodels with doors.

Add-on ModulesCalibre lateral files maybeaugmented with add-on modules thathelp make maximum use of verticalspace. Add-on modules are availablein 4 nominal heights and 3 widthsand can be mounted to any standardCalibre lateral file. Add-on unitscome with two hinged doors. 279 and309 modules include one adjustableshelf. Modules are available with orwithout locks.

Note: The actual overall exteriorheight of Calibre Add-on modules is14 7/89, 16 3/89, 28 3/89 and 31 3/89

Add-on modules are for use withCalibre files only. Calibre files, andAdd-on modules are 189 deep. S2front lateral files are 18 7/89 deep andhave overlay fronts instead of insetfronts as is the case with Calibrefiles. Therefore, S2 front lateral fileswill accept an Add-on module.

Add-on modules will attach toCalibre files manufactured prior to2003. There is a limit of one Add-onmodule per case.

How would you or why would youuse an Add-on module?

1. Add-on modules allow for thecreation of 6 high or taller caseconfigurations. Match a 55.59high case (with 5-10.59 drawers)with a 13.59 nominal heightAdd-on module and you have alow profile 6 high case thatprovides high-density filing forhanging file folders with an easilyaccessed space for binder storage.

2. Add-on modules can provideadditional storage capacity forbinders and supplies by makingbetter use of vertical space. Both279 and 309 Add-on modules willaccommodate two rows ofstandard size binders.

3. Add-on modules provide moredesign flexibility by extending therange of case heights.

Module Application and size

Drawer Modules Application Ext H. Int H.

159 Rollout drawer with hanging rails EDP, oversized binders, A4 and standard binders 14 7/89 14 5/89

13.59 Rollout drawer with hanging rails Binders, top tab files or tape seals 13 3/89 13 1/89

129 Rollout drawer with hanging rails Top tab hanging and non-hanging files or end tab files 11 7/89 11 5/89

10.59 Rollout drawer with hanging rails Top tab hanging and non-hanging file folders 10 3/89 10 1/89

99 Rollout drawer Oversized specialty items and supplies 8 7/89 8 5/89

7.59 Rollout drawer 5 1/49 diskettes, audio tapes and CD/ROM jewel cases 7 3/89 7 1/89

69 Rollout drawer Index cards, microfilm, 3 1/29 diskettes and video tapes 5 7/89 5 5/89

39 Rollout drawer Pens, pencils, business cards and other smaller office supplies 2 7/89 2 5/89

1.59 Reference/posting shelf Touch down platform for sorting or stacking files or documents 1 3/89 N/A

Drawer Modules* Application Ext H. Int H.

159 Receding door fixed shelf EDP, oversized binders, A4 or standard binders 14 7/89 13 1/49

13.59 Receding door fixed shelf Standard binders or suspended top tab files or tape seals 13 3/89 11 3/49

129 Receding door fixed shelf Top tab hanging and non-hanging files or end tab files 11 7/89 109

159 Receding door pullout shelf EDP, oversized binders, A4 or standard binders 14 7/89 13 1/49

13.59 Receding door pullout shelf Standard binders or suspended top tab files or tape seals 13 3/89 11 3/49

129 Receding door pullout shelf Top tab hanging and non-hanging files or end tab files 11 7/89 109

*Interior height is reduced by 159 at hinge location

Calibre

3

Lateral File Planning OverviewCalibre Planning and Technical Specifications

To prevent lateral file/tower fromtipping over and causing injury:

• Read and follow installationinstructions shipped with eachlateral file/tower before use.Consult your Knoll dealer forfurther details.

• Lateral files/towers must beleveled using adjustable glides inthe base.

• Lateral files should be ganged(connected) to adjacent lateralfiles or anchored to a floor or wall.If not ganged or anchored thelateral file must becounter-weighted using counterweight kits recommended in theinstallation instructions.

• Each lateral file and some towersare equipped with a safetyinterlock system which preventsopening more than one drawer at atime. Do not attempted to overridethe interlock system by openingtwo drawers simultaneously, sincethe lateral file/tower may tip.(Does not apply to all towers.)

• Load tower drawers first and placethe heaviest items in the lowestdrawer. Reverse the process whenunloading. Distribute weightevenly within each drawer.

Failure to follow these instructionscould result in personal injury orproperty damage.

It is recommended that all 279h,34.59h and 399h files be gangedtogether, to a wall/floor or utilized acounter weight kit to prevent toppingwhen fully loaded.

Calibre

4

Lateral File Planning OverviewCalibre Lateral Filing Volume and Weights

Filing PlanningCalibre pre-configured files include 1.59, 39, 69, 7.59, 10.59, 129, 13.59 and159 drawer and door modules. The 129, 13.59 and 159 drawers are designed tohandle all standard paper sizes including:

Letter (8 1/29 X 119)Legal (8 1/29 X 149)A4 Foolscap (9 1/59 X 14 1/39)JIS (9 1/59 X 12 1/49)EDP (8 1/29 X 159)

The 10.5( drawer module is designed to handle:Letter (8 1/29 X 119)Legal (8 1/29 X 149)

Note: Only 129, 13.59 and 159 modules are available as receding doors witheither fixed or pull-out shelves.

Filing Volume and WeightsThe paper size or media to be stored will determine the best width of file tospecify. In applications requiring high-density letter-sized documents filedfront-to–back, the most efficient file widths are 309 and 429. Files that are369 wide work efficiently to store legal-sized documents in front to backconfigurations and do not efficiently handle letter-sized documents.

Finding the Optimum Storage Configuration:309 width (Front-to-Back) = Letter 31.5 Filing Inches309 width (Side-to-Side) = Legal 26 3/4 Filing Inches369 width (Front-to-Back) = Letter 31.5 Filing Inches369 widths (Side-to-Side) = Legal 32 3/4 Filing Inches429 widths (Front-to-Back) = Letter 47 Filing Inches429 widths (Side-to-Side) = Legal 38 3/4 Filing Inches

Example: If 12’ of open wall space were available for 519 high files with4-129 drawers, two options would be possible:

Option A: Four 369 wide filesOption B: Two 429 and two 309 wide files

If the usage was for letter-sized documents filed front-to-back, option Awould provide 504 total filing inches, while option B would allow 628 totalfiling inches in the same square footage.

Calibre Lateral File Approximate Case Weights (Empty Units)

27( High File with 2-12( drawers:309w (98 lbs.)369w (110 lbs.)429w (123 lbs.)




All drawers support up to .017 pounds per cubic inch of volume assuming theinterior height is no more than 129 high.

Calibre

5

Lateral File Planning OverviewKnoll Panel Height Matrix Alignment to Knoll Calibre Lateral Files

ReffPanel

34 42 49 64

File Height 26.843 38.843 44.843 50.843 53.843 55.343 58.343 62.843 64.343

DividendsPanel

42 50 57 64

File Height 26.843 38.843 44.843 50.843 53.843 55.343 58.343 62.843 64.343

3

CurrentsPanel

39 48 64

File Height 26.843 38.843 44.843 50.843 53.843 55.343 58.343 62.843 64.343

Note: Knoll Systems are listed with the Calibre file heights that best match their overall panel heights. Both the files and panels are listed with glides fullyretracted. Calibre files provide 3/49 vertical glide adjustment. Plan for the optimization of filing and storage rather than the visual alignment of the drawersbetween storage solutions. Calibre files are built on a 1.59planning module with a 129 high drawer head that is actually 11.9009 tall. Pedestals have 129 highdrawer heads that are 11.7339 tall. Therefore, pedestals drawers will not align with file drawers when combined within a workstation. If a lateral file look next toa pedestal is desired, then specify a doublewide pedestal in place of the lateral file, below the worksurface. Doublewide pedestals share the same 11.7339 talldrawer height of the pedestal.

Calibre

6

Lateral File Planning OverviewUnderstanding Pattern Numbers for Calibre Lateral Files

The first eight characters of the alpha/numeric pattern numbers for Calibre orS2 files, refers to the type of front, the height and width of the case andwhether it is non-lock or locking.

Example First 8 Characters: C2F5536CDDDDDC = Calibre front2 = Generation codeF = File55 = Nominal height of the case36 = WidthC = Locking

The remaining characters address the height of the component from the top tothe bottom of the file.

Example Last Characters: C2F5536CDDDDDD = 10.59 DrawerD = 10.59 DrawerD = 10.59 DrawerD = 10.59 DrawerD = 10.59 Drawer

A character is required at the end of pattern number to designate the finishcode. In some instances there may be a need for additional characters orcharacter substitutions to add options to the product. An example of this isthe specification of reference/posting shelves. Pre-configured files comestandard with a tie bar/lateral spanner that is denoted with a product patterncode of ‘‘K’’ within the parent pattern number. If a reference/posting shelf isrequired, you must replace the ‘‘K’’ code with a ‘‘J’’ code within the parentproduct pattern number and add a list price up-charge.

Calibre

7

Lateral File Sample Bid Technical SpecificationsCalibre Lateral Files, Hybrids and Cabinets

General Product Description

A. Files shall be of contemporarystyling, with a steel top, sidepanels, back panel, full bottom,rollout drawers and shelvesmounted on ball bearingsuspensions, receding doors,fixed shelves, interlockingdrawers and individual lockingdrawers. Available with orwithout locks. Individual lockingdrawers are also available with orwithout security separators.

B. Lateral File sizes that must beavailable:Depth: 189 (Must accommodateletter or legal width files)Widths: 309, 369 and 429Nominal Drawer Head Heights:39, 69, 7.59, 99, 10.59, 129, 13.59and 159Nominal reference shelf: 1.59Overall height of cases withglides fully retracted: 279, 34.59,399, 459, 519, 549, 55.59, 58.59,639 and 64.59

C. Hybrids sizes that must beavailable:Depth: 189Width: 309 and 369Drawer hand heights: 39, 69, 7.59,99, 10.59, 129, 13.59 and 159Overall height of cases withglides fully retracted 55.59, 639and 64.59

D. Cabinets sizes that must beavailableDepth 189Widths: 309 and 369Overall height of cases withglides fully retracted279, 34.59 399, 519, 55.59, 639and 64.59

E. Add-on ModulesDepth 189Widths: 309, 369, 429Overall height of cases: 14 7/89,16 3/89, 28 3/89, 31 3/89

CaseA. The wrapper, comprising the side

panels and back panel, shall be22-gauge steel with formed 20gauge steel vertical channels tosupport the mounting of drawerslides and shelves. Verticalchannels shall be welded to thebase assembly. In addition thevertical channels shall be gluedand welded to the wrapper.

B. Back panel shall be constructedfrom 22-gauge steel with aformed vertical channel of 20gauge steel. The vertical channel

shall be welded to the base panand back, along with the use ofan adhesive. In addition toincreasing the overall structuralintegrity of the case, the verticalchannel reinforcement shall alsosupport the installation of dividerseptum’s.

C. Top pan shall be of 20-gaugesteel with a formed channelspanning the width of the case.Top shall support the case lockhousing. Top shall bemechanically attached to allowfor removal and replacement inthe field. The top pan shall besupported by side-to-sidecross-rails that are welded to theside vertical channels.

D. Steel Bottom pan shall be20-gauge steel with formedchannels spanning the depth andwidth of the case. Side-to-sideand front to back channels areinstalled and welded to the panfor increased rigidity. The baseshall be welded to the verticalchannels and bottom flanges ofthe wrapper assembly. Base shallsupport four-recessed, extendableglides.

DrawersA. 109 and taller drawers shall be

able to accommodate letter andlegal Pendaflex file folders.

B. All 69, 7.59, 10.59 and 129 drawerbodies shall be of 2-piececonstruction consisting ofminimum 20-gauge drawerbottom and 22-gauge verticalwrapper. All other drawer bodiesshall be constructed of 20-gaugesteel with welded construction.

C Load capacity for 39-159 drawersshall be at least 0.017 pounds percubic inch of usable space.

D. Drawers shall be supported withfull extension, ball-bearing slideswith a minimum of 150 poundcapacity (159 x 429 drawers)

E. Metal drawer fronts shall beconstructed of 20-gauge steelavailable in two styles. StandardCalibre style fronts shall be insetand flush with case. Series 2 stylefronts are available for selectconfigurations featuring anoverlay front design. All metaldrawer fronts shall have fullwidth integral drawer pull.

F. Optional laminate drawer frontsare available for select sizes andconfigurations in a range of

finishes. Laminate drawer frontsfeature an overlay design with 109applied finger pull.

Receding DoorsA. 13.59 and 159 receding doors

shall be available with eitherfixed or pullout shelves. Fixedshelves shall support standard8 1/29 X 119 binders. 159 fixedshelves shall support EDP filing.

B. Receding doors shall use a hingealong with a ball-bearing glidesuspension. Hinges shall provideclearance for standard sizebinders when used with a 13.59 or159 receding door fixed shelfconfiguration.

C. Door front shall have a full widthintegral drawer pull.

Suspensions (Drawer Slides)Suspension must be tested and listedto be acceptable.Suspension shall support heavy dutyand high-usage application.

A. Drawers and pullout shelves shalloperate on full extension metalball-bearing suspensions. Eachslide shall have 44, 1/49 ballbearings.

B. Ball-bearing suspensions shall beused for reference/ postingshelves, receding doors and filedrawers.

C. All drawers and shelves must beremovable without removing ordismantling the suspension orinterlock mechanism.

D. Suspension shall provide aninterlock system for drawers andpullout shelves (excludingreference shelves).

LocksA. Available in locking or

non-locking units.

B. Locks shall have a removablelock core.

C. Locks may be keyed alike.

D. Locks will be master keyed.

E. Individual locking drawers shallbe supported.

Paint FinishFinish coat to be baked enamel orelectrostatic applied epoxy powdercoat with a range of colors with glosslevel not to exceed .50. Colorselection shall include custom matchpaints.

Labels

Each file is to have a 9Caution Label9attached to the top compartment andvisible to the user when thecompartments are accessed. Labelshall contain safety precautionsincluding leveling, loading andweight distribution.

AccessoriesEach file drawer with the exceptionof the 39, 69, 7.59 and 99 drawersshall come with file bars that supportlegal and letter filing. Optional labelholders shall be available. Allreceding doors with fixed shelf shallbe shipped with D-ring dividers andattachment back.

TrimPulls shall be full width and integralto the drawer head.

LevelersLevelers shall be zinc-planted steeltreaded rods with nylon pads for 3/49overall adjustment (base of file is1 1/29 tall).

Calibre

8

Lateral File Sample Bid Technical SpecificationsCalibre Lateral File with Series 2 Steel Fronts

General Product Description

A. Files shall be of contemporary styling, with asteel top, side panels, back panel, full bottom,rollout drawers and shelves mounted on ballbearing suspensions, interlocking drawers.Available with or without locks.

B. Lateral File sizes that must be available:Depth: 189 (must accommodate letter or legalwidth files)Widths: 309, 369 and 429Drawer Head Heights: 129

C. Overall height of cases with glides fullyretracted: 279, 399 and 519

CaseInner frame: 20-gauge steelWrapper: 22-gauge steelCase top: 20-gauge steelCase base: 20-gauge steel

LevelersLevelers shall be zinc-plated steel threaded rodswith nylon pads for 3/49 overall adjustment (Base offile is 1 1/29 tall)

DrawerDrawer body: Steel construction, 20-gauge bottomwith 22-gauge vertical wrapperDrawer front: 20-gauge steel with integral, fullwidth pull

Shelf3/49 adjustable shelf: 20-gauge steelCabinet height adjustment: increments of 2.59

Lock AssemblyA. Lock and interlocking system components are

integral to the steel, triple extension ballbearing drawer slides

B. Master keys available

C. Field-removable lock cores

D. Lock cores housings are cast metal with ablack anodized finish

Drawer SuspensionsDrawer suspensions shall be triple extension,telescoping suspension fitted with steel ballbearings and retainers. Slides contain an integral,cable actuated interlocking systems

Paint FinishPaint finish shall be electrostatic appliedpowder-coat epoxyApplication thickness: 1.5-2.0 mmGloss range: non-metallic: 30-40Gloss range: metallic: 40-50Paint grades: P1, P2 and P3

DimensionsDepth: 18 7/89 for lateral files.Available widths: 309, 369 and 429 for lateral filesAvailable heights: 279, 399, 519 lateral files

Actual Case Heights:27( 26 27/32939( 38 27/32951( 50 27/329

Calibre

9

Lateral File Sample Bid Technical SpecificationsCalibre Lateral Files, Hybrids and Cabinets

Component Description

Case Inner frame: 20-gauge steelWrapper: 22-gauge steelCase top: 20-gauge steelCase base: 20-gauge steel

Drawer Drawer body: Minimum 20-gauge bottom;22-gauge sides

Drawer front: 20-gauge steel with integral fullwidth pull

Shelf Fixed shelf 1/29: 18-gauge steel (Only used with13.59 receding door)Shelf adjustable 3/49: 20-gauge steelCabinet Height adjustment: increments of 2.59

Levelers Zinc-plated steel threaded rods with nylon padsfor 3/49 overall adjustment. (Base of file is 1 1/29 tall)

Lock Assembly Lock and interlocking system components areintegral to the steel, triple extension ball bearingdrawer slides

Master keys available

Field-removable lock cores

Lock core housings are cast metal with a blackanodized finish

Drawer and Roll-outSuspensions

Triple extension, telescoping suspension fittedwith steel ball bearings and retainers. Slidescontain an integral, cable actuated interlockingsystem

Receding DoorSuspensions

Ball bearing suspension slides

Reference/Posting Shelf

Ball bearing suspension slides

Paint Finish Electrostatic applied powder-coat epoxyApplication thickness: 1.5-2.0 mmGloss range: non-metallic: 30-40Gloss range: metallic: 40-50Paint grades: P1, P2 and P3Custom color match for non-metallic, non-custompaints provided at a P2 list price. All white andmetallic paints will be processed as a P3 paintgrade.

Component Description

Critical Dimensions External Depth: 189 for Calibre laterals, cabinets,hybrids and add-on units

External Depth: 159 for bookcases (Note the baseheight of Bookcases is 2 1/169 compared to 1 1/29high for Calibre files)

Available widths: 309, 369 and 429 for lateral filesand add-on units

Available widths: 309 and 369 for cabinets,hybrids and bookcases

Available heights: 279, 34.59,399, 459, 519, 549,55.59, 58.59, 639 and 64.59 for lateral files(Nominal)

Available heights: 55.59, 639 and 64.59 forhybrids (Nominal).

Available heights: 279, 34.59, 399, 519, 55.59, 639and 64.59 cabinets (Nominal). Bookcases 27.259,29.8759, 399, 43.59, 57.1259, 63.3759, 70.759, and84.59 respectively.

Available heights: 13.59, 159, 279 and 309 foradd-on’s units (Heights listed in price list arenominal, the actual heights of add-on modules are14 7/89, 16 3/89, 28 3/89 and 31 3/89 respectively).

Actual Calibre Case Heights: (Standard 1.59 highbase)27( 26 27/32934.5( 34 11/32939( 38 27/32945( 44 27/32951( 50 27/32954( 53 27/32955.5( 55 11/32958.5( 58 11/3263( 62 27/32964.5( 64 11/329

Calibre

10

Built-to-Spec Lateral File ConsiderationsCalibre Lateral Files

Create Custom Solutions

To create a built-to-spec file, youmust first select from one of 10standard case heights in 3 widths.Case heights are available in 279,34.59, 399, 459, 519, 549, 55.59,58.59, 639 and 64.59 (nominal). Casewidths are available in 309, 369 and429. After you have selected theappropriate case for your application,then you may begin to configure theinterior modules that best supportthe filing and storage requirementsas defined by the user. There are 9standard drawer heights in variousconfigurations to support any numberof filing and storage needs. They are1.59, 39, 69, 7.59, 10.59, 129, 13.59and 159 high.

Drawer modules are designed tomatch up with the interiordimensions of the cases. The totalnumber of modules used within acase must not exceed the totalinterior capacity. Listed here are theactual interior heights of thestandard Calibre file cases:

Outside Case Interior Case279 24934.59 31.59399 369459 429519 489549 51955.59 52.5958.59 55.59639 60964.59 61.59

When compiling a product patternnumber and pricing for abuilt-to-spec case, specify theindividual components within thechosen case from the top down. Thetotal height of drawer modules withina case will be 39 less than the totaloverall height of the case. This is aresult of a 1 1/29 deduction for the topand an additional 1 1/29 deduction forthe base for a total 39. When creatingyour pattern number start with thecase pattern number first: C2F5530C(55.59 high x 309 wide case with alock), then add your drawers from thetop down. Each drawer will have aletter designating its size, forexample a 10.59 high drawer isrepresented by the character 9D9.Within a 55.59 high case you mayplace up to five 9D9 modules to fillthe interior space of 52.59, which isthe space available with the 39deduction for the base and top of thecase. The math is simple; just followthe planning rules listed in thedocument to avoid any mistakes.Also, consult the notes at the bottomof each page for additionalspecification information.

Please note the following planningconsiderations when designing a‘‘Built-to-Spec’’ configuration:

1. Posting shelves nor tie-bars arepermitted directly belowcupboard doors.

2. Tie-bars and posting shelves arenot permitted within the toplocation or the bottom location ofa lateral file.

3. Calibre files are painted with amonochromatic color scheme. Ifcase and drawer fronts arerequired to be a different color onthe same case, this is considereda special and requires a customproduct request form from CustomProduct Development.

4. Receding doors with fixed andpullout shelves are not permitteddirectly below posting shelves oron any lateral file with hybrid unitdoors.

5. Cases are limited to either onetie-bar or one posting shelf percase.

6. Individual locking drawers arenot available as a 9Built-to-Spec9option.

7. Only 639 and 64.599Built-to-Spec9 Hybrids arepermitted.

8. S2 front Calibre lateral files arenot available as a 9Built-to-Spec9.

9. No more than four 69 or 39drawers may be placed within acase as standard product. Morethan four 69 or 39 drawers may bespecified only as special product.Pricing for these special files maybe more than a ‘‘built-to-spec’’standard file with the sameconfiguration.

Additional Calibre File PlanningConsiderations:

1. S2 lateral files will not acceptstandard Calibre worksurface filetops, as the files are 18 7/89 deep.You must use topics specific to S2front lateral files.

2. Calibre Add-on modules are notdesigned for use with S2 frontlateral files.

3. When using 459 through 64.59high files, counterweights arerecommended for files not gangedtogether or anchored to walls.

4. Posting shelves are best utilizedin case configurations that usereceding doors to support end tabfiling.

5. Lateral files may not be placed orstacked on top of one another.

6. Lateral files must be loaded fromthe bottom up with the heaviestitems in the lower drawers.

7. Calibre lateral files utilize a 129high drawer head that is actually11.9009 tall. Pedestals have 129high drawer heads that are11.7339 tall. Therefore, pedestalsdrawers will not align with filedrawers when combined within aworkstation. If a lateral file looknext to a pedestal is desired, thenspecify a doublewide pedestal inplace of the lateral file, below theworksurface. Doublewidepedestals share the same 11.7339tall drawer height of the pedestalas well as the same base profile.

Calibre

11

Ordering Calibre Files and Storage

The Product

This section of the CalibreCollection Price List will give youall the information you will need tospecify Calibre Files and Storageproducts.

To meet different aestheticrequirements, Calibre Files andStorage can be specified with thestandard Calibre front, or with anoptional front designed to matchSeries 2 products.

The Numbers

The options available in specifyingCalibre products are clear, and theordering process simplified, throughthe numbering system.

This alphanumeric system ismodular, like the files themselves.Each digit stands for a singleproduct variable.

The first three digits specify thecase front, generation and producttype. The last digits specify theheight, width, lock option andmodule configuration – beginning atthe top of the cabinet anddescending to the bottom.

Preconfigured

Preconfigured units are availableand are intended to simplify yourordering process. Preconfiguredunits are the most commonconfigurations that are ordered andinclude files and cabinets.

Built-to-Spec

Calibre can be specified inthousands of configurations usingour ‘‘built-to-spec’’ option to meetany storage need.

We have included a worksheet thatis designed to help you build anordering number and determine theprice of your file. You will need thisinformation, and a finish code fromthe Calibre colors card to place anorder.

All units need to be specified fromthe top down.

Built-to-Spec units that include 39,69, 99 or 159 components or includeR,S,T, or U door options are subjectto extended lead times.

The Worksheet

Page 61 is a worksheet designed tohelp you build an ordering numberand determine the price of your file.You will need this information, anda finish code to place an order.

Color

All inside and outside case surfacesare painted in the same specifiedpaint color.

Interior components and accessoriesare painted in black. Mechanicalparts are zinc plated or painted in acolor integral to manufacturing.

Please refer to the Calibre Colorscard for Standard Front and Casefinishes. Color codes are notincluded in the product ordernumber, and must be specifiedseparately to complete your Calibreorder. In addition to the colorcard, always evaluate an actualpaint sample prior tospecification.

Locks

Most Calibre product may beordered with or without locks.Product ordered without locksinclude a black Knoll-logo insert inthe same position. Insert may beremoved to retrofit a lock later.

Statement of line

Calibre fronts are available on caseheights of 279, 399, 459, 519, 549,55.59, 58.59, 639 and 64.59 withinset fronts in heights of 1.59, 39,69, 7.59, 99, 10.59, 129, 13.59 and159.

Series 2 fronts are available on 279,399 and 519 cases with 129 overlayfronts.

Calibre

12

Ordering the Calibre Pedestal

The Product

The Calibre pedestal is a storagesolution that incorporates the awardwinning softly radiused pull of theCalibre file with the state-of-the-arttechnology of a seamless wrapper.The Calibre pedestal is at home inany office environment.

The Calibre pedestal consists of astrong single piece shell that housesseveral different configurations.Floorstanding and mobile pedestalsare available in any of the Calibrefinish colors.

The Numbers

The specifying process for theCalibre pedestal is clear andsimplified through the numbersystem.

The alphanumeric pattern number is7 digits long with each digit standingfor a product variable.

The first digit stands for pedestal caseheight:3 = Standard case height

The second digit stands for the style ofpedestal:B = FloorstandingC = Mobile

The third and fourth digits stand fordepth:18 = 189 deep24 = 249 deep30 = 309 deep

The fifth digit stands for the lockchoice:C= Knoll lockE = No lock

The sixth and seventh digits stand forthe drawer configuration:01 = box/file

(6/12)02 = personal/personal/file

(3/3/12)03 = box/box/box

(6/6/6)04 = personal/EDP

(3/15)05 = box/box/file

(6/6/12)06 = personal/personal/box/file

(3/3/6/12)07 = file/file

(12/12)08 = personal/box/EDP

(3/6/15)09 = personal/box/file

(3/6/15)

Example: 3B18CO5

Calibre, floorstanding, 189 deep,Knoll lock, box/box/file (6/6/12).

Locks

Follow KnollKey Lock Programlisted on page 137.

Base Fascia

The base fascia should be specifiedwhen Calibre Pedestals are usednear Calibre Files. See page 101 formore information.

Calibre

13

Calibre Files and StorageColors and Finishes

Knoll Color Program

Core Paint FinishesSpecify Core finishes for all newcustomers

P1 Paint Finishes111 Jet Black112 Brown113 Dark Grey114 Folkstone Grey115 Medium Grey116 SandStone117 Soft Grey118 Bright White

P1 Textured Paint Finishes111T Textured Jet Black112T Textured Brown113T Textured Dark Grey114T Textured Folkstone Grey115T Textured Medium Grey116T Textured SandStone117T Textured Soft Grey118T Textured Bright White

P2 Paint Finishes611 Beige Mist Metallic612 Medium Metallic Grey

P2 Textured Paint Finishes611T Textured Beige Mist

Metallic612T Textured Medium Metallic

Grey

P3 Paint Finishes613 Silver

Pull Finishes for Laminate FrontFiles111 Jet Black112 Brown113 Dark Grey114 Folkstone Grey115 Medium Grey116 Sandstone117 Soft Grey118 Bright White611 Beige Mist Metallic612 Medium Metallic Grey613 SilverAA Anodized AluminumAN Anodized Nickel

Paint Samples49 x 69 (CALSAMP) or 89 x 89(CALSAMPLG) metal samples maybe ordered in any core paint finish toaid in color selection. Samples areavailable as a single plate or as apack of 10 (same color only).

Pattern # ListCALSAMP 26.CALSAMP10 198.

Note: For laminate front storage,specifiers must select a paint finishfor the case as well as choosing alaminate selection for the front.

Custom File Colors PolicyFor all colors outside the standardpalettes for Calibre storage asdefined within this price list, Knollwill custom match your specification.Please submit the request usingKnoll’s Custom Finish Planneravailable on Dealer Portal.

Custom colors will be processed at aP2 list price for finishes that are notmetallic, clear or white. Metallic,clear and white finishes will beprocessed at a P3 list price.

Extended lead times may apply tocustom paint match selections.

Laminate finishes for Laminate Front Files and File Worksurface TopsLaminate Front Files: matching edge band unless noted otherwiseFile Worksurface Tops: select edge band finish*denotes melamine finish+ finishes available for Dividends Horizon style file tops only

L1 - Solid Colors114* Folkstone Grey117* Soft Grey118* Bright White119* Pumice

L2 - Solid Colors111* Jet Black115* Medium Grey128* Fog

L2 - Patterned121 Micro Grey

114 edge band122 Brushed Sand

119 edge band123 Brushed Grey

128 edge band129 Micro Sand

119 edge band

L2 -Wood Grain124* Medium Cherry125* Natural Maple126* Natural Cherry127* Walnut139* Light Ash140* Warm Ash141* Whitened Ash142* Grey Ash143* Classic Oak144* Graphite Pear145 Zebra147 * Silverwood +148 * Smokewood +149 * Barnwood +

File Top and Worksurface EdgeBands111 Jet Black113 Dark Grey114 Folkstone Grey115 Medium Grey117 Soft Grey118 Bright White119 Pumice124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut128 Fog139 Light Ash140 Warm Ash141 Whitened Ash142 Grey Ash143 Classic Oak144 Graphite Pear145 Zebra

Calibre

14

Calibre Files and StorageWood Finishes

Wood FinishesNew codes begin with a three digit numeric sequence, followed by a letter suffix. Each letter suffix (A-F) represents a different combination of pore fill optionsand gloss levels.

Code V1 TECHWOOD

638 Blond Maple628 Dark Mahogany639 Light Cherry641 Black Oak506 Maple509 Cherry512 Medium Walnut513 Medium Teak514 Espresso637 Natural644 Light Walnut645 Dove Grey

Gloss Level Fill LevelA Low Gloss Closed PoreB MediumGloss Closed PoreC High Gloss Closed Pore

D Low Gloss Open PoreE Medium Gloss Open PoreF High Gloss Open Pore

*Note:For more detailed information on Veneer finishes, please refer to the Wood Finish Matrix on the Knoll.com

Calibre

15

Calibre Files and StorageLegacy Finishes

Knoll Legacy Finish SelectionsFile Top and WorksurfaceLaminate and Edge ColorsSpecify Legacy Finishes to matchexisting product only. Legacyfinishes are not available for newcustomers

Dividends Laminate OptionsMP70 Light OakM95 Grey GraniteM96 Rose GraniteMP58 Deep MahoganyM80 TaupeM89 SlateM5 Dark NeutralMR6 Winter Gray MatrixPA PearwoodSD SandCM Clear MapleMC Carmel MapleWM Warm CherryB SnowES7 White Essence

Legacy FinishesCalibre and S2 Front File andCabinet Colors

P1 Paint FinishesA381 Bone11 Classic WhiteD Dark NeutralY1 PewterR TaupeWLWB Willow Grey

P2 Paint FinishesV Dark Metallic Grey2 Flint MetallicU Light Metallic GreyW Light Metallic TanH Metallic Beige

P3 Paint FinishesB White

Calibre

16

Calibre PedestalColors and Finishes

Knoll Color Program

Core Paint FinishesSpecify Core finishes for all newcustomers

P1 Paint Finishes111 Jet Black

(was 27 Matte Black)112 Brown113 Dark Grey (was Y3)114 Folkstone Grey115 Medium Grey (was Y2)116 SandStone117 Soft Grey (was E)118 Bright White

P1 Textured Paint Finishes111T Textured Jet Black112T Textured Brown113T Textured Dark Grey114T Textured Folkstone Grey115T Textured Medium Grey116T Textured SandStone117T Textured Soft Grey118T Textured Bright White

P2 Paint Finishes611 Beige Mist Metallic612 Medium Metallic Grey

(was J)

P2 Textured Paint Finishes611T Textured Beige Mist

Metallic612T Textured Medium Metallic

Grey

P3 Paint Finishes613 Silver (was 3)

Legacy Paint FinishesSpecify Legacy Finishes to matchexisting product only. Legacyfinishes are not available for newcustomers

P1 Paint FinishesA381 Bone11 Classic WhiteD Dark NeutralY1 PewterR TaupeWLWB Willow Grey

P2 Paint FinishesV Dark Metallic Grey2 Flint MetallicU Light Metallic GreyW Light Metallic TanH Metallic Beige

P3 Paint FinishesB White

ColorAll inside and outside pedestal casesurfaces are painted in the samespecified paint color.

Interior components and accessoriesare painted in Black. Mechanicalparts are zinc plated or painted in acolor integral to manufacturing.

Please refer to the Calibre finish cardfor case and front finishes. Colorcodes are not included in the productorder number and must be specifiedseparately to complete your Calibrepedestal order.

Custom Colors Policy

PaintCustom paint colors may be appliedto Calibre Pedestals on a selectbasis.

For colors outside the standardpalette for Calibre, Knoll will custommatch to your specificationaccording to the followingrequirements.

The request for a custom paint colormust be accompanied by a purchaseorder for the product to be orderedand by a master color-match sampleof paint applied to metal, havingdimensions of at least 39 x 59.

Knoll will evaluate the sample todetermine application feasibility.Upon approval for application, Knollwill forward a two factory sampleswith an assigned Knoll color nameand code for customer approval. Oneof the approved samples must besigned and returned to Knoll beforean order may be placed.

Upon receiving customer approval,Knoll will enter the order.

Calibre pedestals incur a P2 listprice for custom non-metallicfinishes or a P3 list price for custommetallic, clear and white finishes.

Calibre

17

Calibre PedestalKnollTextiles and Spinneybeck Leathers

Approved textiles for CalibreMobile Pedestal Cushion

Abacus f

AegeanAlignmentAll StarAlter EgoArberArno f

ArrondissementAswanAtelierAtlasAxiom jfr

BackdropBaxterBeaconBelizeBiota f

BiscayneBistro f

Bocce f

Boundary f

Brigadoon fjfr

CairoCameoCatoCatwalkCenturyChain LinkChanceCharmChiseledChroma f

Chronicle f

CircaClassic Boucle f

CleoClose KnitColor FieldCommon Ground f

Commuter Cloth f

Compass CRComaroCoterieCrossroadCuddle StripeDahlia CRDay TripperDeliteDemureDivaDjenneDouble Agent jfr

DuneDurandDynamicEarthwork f

Eclat Weave

ElementEntouragef

EssenceFerryFibraFireflyForza jfr

Fox Trot CRGalla II f

GibsonGliderGrandeGrandviewGreenwichGroovyHarrisonHazeHeavy MetalHeliosHighlandHolbrookHologramHourglassHudsonIconIn StitchesInnuendoIslandJasmineJourneyf

JubileeJunoKabukiKampalaKatazomeKaya CRKeatonKimonoKingstonKnoll Felt f

Knoll Hopsack f

Kora CRLagosLegend CRLibertyLimaniLittle DevilLore CRLudlowLyricMagnoliaMarinerMarqueeMasqueradeMelangeMelody jfr

MenagerieMeroeMidpointMilestone

Mod PlaidModern TweedMonarch f

Nature WalkNight LifeNobleNorth IslandObiOh La LaOriginsOverture f

PalisadePanache CRParadigmPedal Pusher jfr

Petite FloralPlaidtasticPogoPrairie jfr

Prepf

Presto f

Prim f

Prince HairyPullmanQuarkRadianceRansom f

ReflectRegard CRRivingtonRoamRush HourSaharaSandpiper CRSashikoSequin CRSerendipitySeuratShermanSidelineSinclairSmart jfr

Soireef

SoliloquySonnet f

SoonSpark f

SpencerSpree f

StacksStepping StonesStretch AppealStriae StripeStripemaniaSummitSuttonf

SwankSwingSynth f

Tabloid f

Theory jfr

Tight Rope jfr

Tilden jfr

Tinge jfr

TopographyTotemTower GridTreble CRTrophyTrystUltrasuede f

Uni-FormUtmostUtrilloVateraVenueVersa f

VersatilityVibe II jfr

Vinyl jfr

WestwoodWhipWild ThingWitWoodlandWorld PieceYeniZari CRZen WaveZiplineZoom

Pedestal cushions are upholstered(from the front to the back of thepedestal) with the fabric directionmatching the textile sample.

Aproved Spinneybeck Leathers forCalibre Mobile Pedestal Cushions

AlaskaAmazonAndesArizonaCervoCopenhagenCordovanDerbyDistressedDucaleDucale VeloursEspañaMaremmaMarissaPrimaRivaSabrinaSaddleSalonVelluto PelleVolo

C = approved for use on credenza cushion P = approved for use on mobile pedestal cushion f = CAL 133 Pre-approvedjfr Fire Retardants Chemicals

Calibre

18

Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files279 High Calibre Front Lateral Files

description w h lock pattern no. P1 P2 P3

279 high lateral file, 2-129 drawers with hangingrails

309 279 C2F2730ECC $998. $1,101. $1,158.

309 279 Y C2F2730CCC 1,061. 1,169. 1,229.

369 279 C2F2736ECC 1,126. 1,239. 1,303.

369 279 Y C2F2736CCC 1,192. 1,311. 1,381.

429 279 C2F2742ECC 1,225. 1,352. 1,414.

429 279 Y C2F2742CCC 1,287. 1,423. 1,490.

279 high lateral file, 2-129 drawers recedingdoors with pullout shelves

309 279 C2F2730EZZ 1,148. 1,266. 1,330.

309 279 Y C2F2730CZZ 1,213. 1,337. 1,401.

369 279 C2F2736EZZ 1,275. 1,404. 1,483.

369 279 Y C2F2736CZZ 1,343. 1,481. 1,558.

429 279 C2F2742EZZ 1,374. 1,519. 1,590.

429 279 Y C2F2742CZZ 1,435. 1,587. 1,664.

Order Code

27( High Calibre Front LateralFiles

Example: C2F2730CCC-115

C Calibre Front

2 Generation Code

F File

27 279 High

30 309 Wide

C Knoll Lock

C 129 Drawer withHanging Rails


115 Medium Grey (P1 paintpricing)

Specification Information

P1= painted finishes



Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see custom colorpolicy page 14)

Application Notes

Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three high) should beweighted with a counterweight (seeAccessories, page 76).

Rails are provided for filingside-to-side and front-to-back andare adjustable for letter, A4,foolscap, JIS, legal, or EDP papersizes.

See KnollKey lock program on page137 for keying information.

Dividers and attachment backsincluded with L, M and N openings(Receding Door with Fixed Shelf).D-Ring dividers and attachmentback are not compatible with rolloutdrawers.

Critical Dimensions

Actual Outside Case Height 26 27/329Actual Inside Case Height 249

Calibre files are 189 deep.

Note:Drawer configurations read from topto bottom of the case. Drawers withhanging rails include front to backand side to side hanging rails. Referto front planning pages foradditional information.

Label holders are not included withfiles. Please see Accessories page76.

Calibre files without locks include ablack Knoll-logo insert in the sameposition. Insert may be removed toretrofit a lock later.

Calibre

19

Cal

ibre

File

Col

lect

ion



279 high lateral file, 1-39, 2-10.59 drawers withhanging rails

309 279 C2F2730EIDD $1,343. $1,485. $1,565.

309 279 Y C2F2730CIDD 1,405. 1,550. 1,626.

369 279 C2F2736EIDD 1,466. 1,620. 1,702.

369 279 Y C2F2736CIDD 1,527. 1,681. 1,765.

429 279 C2F2742EIDD 1,572. 1,737. 1,826.

429 279 Y C2F2742CIDD 1,635. 1,801. 1,890.

279 high lateral file, 1-13.59 receding door withfixed shelf, 1-10.59 drawer with hanging rails

309 279 C2F2730EMD 1,147. 1,266. 1,337.

309 279 Y C2F2730CMD 1,213. 1,330. 1,399.

369 279 C2F2736EMD 1,210. 1,338. 1,404.

369 279 Y C2F2736CMD 1,271. 1,400. 1,471.

429 279 C2F2742EMD 1,274. 1,407. 1,485.

429 279 Y C2F2742CMD 1,340. 1,473. 1,550.

Order Code


Example: C2F2730CCC-115

C Calibre Front

2 Generation Code

F File

27 279 High

30 309 Wide

C Knoll Lock









Application Notes





Critical Dimensions






Calibre

20

Calibre Front Lateral Files - PreconfiguredCalibre Front Lateral Files34.59 High Calibre Front Lateral Files


34.59 high lateral file, 3-10.59 drawers withhanging rails

309 34.59 C2F3430EDDD $1,367. $1,503. $1,577.

309 34.59 Y C2F3430CDDD 1,429. 1,570. 1,649.

369 34.59 C2F3436EDDD 1,523. 1,674. 1,759.

369 34.59 Y C2F3436CDDD 1,586. 1,749. 1,830.

429 34.59 C2F3442EDDD 1,659. 1,823. 1,915.

429 34.59 Y C2F3442CDDD 1,719. 1,890. 1,986.

Order Code

34.5( High Calibre Front LateralFiles

Example: C2F3430CDDD-115

C Calibre Front

2 Generation Code

F File

34 34.59 High

30 309 Wide

C Knoll Lock

D 10.59 Drawer withHanging Rails









Application Notes





Critical Dimensions

Actual Outside Case Height 34 11/329Actual Inside Case Height 31 1/29





Calibre

21

Cal

ibre

File

Col

lect

ion




309 399 C2F3930ECCC $1,377. $1,518. $1,592.

309 399 Y C2F3930CCCC 1,436. 1,584. 1,665.

369 399 C2F3936ECCC 1,530. 1,688. 1,779.

369 399 Y C2F3936CCCC 1,598. 1,762. 1,851.

429 399 C2F3942ECCC 1,675. 1,849. 1,932.

429 399 Y C2F3942CCCC 1,739. 1,917. 2,014.

399 high lateral file, 3-129 receding doors withpullout shelves

309 399 C2F3930EZZZ 1,599. 1,765. 1,854.

309 399 Y C2F3930CZZZ 1,663. 1,835. 1,928.

369 399 C2F3936EZZZ 1,763. 1,939. 2,042.

369 399 Y C2F3936CZZZ 1,826. 2,014. 2,119.

429 399 C2F3942EZZZ 1,901. 2,096. 2,193.

429 399 Y C2F3942CZZZ 1,964. 2,168. 2,274.

399 high lateral file, 1-159 receding door withfixed shelf, 2-10.59 drawers with hanging rails

309 399 C2F3930ELDD 1,454. 1,611. 1,692.

309 399 Y C2F3930CLDD 1,521. 1,672. 1,756.

369 399 C2F3936ELDD 1,622. 1,790. 1,882.

369 399 Y C2F3936CLDD 1,684. 1,854. 1,945.

429 399 C2F3942ELDD 1,910. 2,107. 2,214.

429 399 Y C2F3942CLDD 1,976. 2,170. 2,277.

Order Code


Example: C2F3930CCCC-115

C Calibre Front

2 Generation Code

F File

39 399 High

30 309 Wide

C Knoll Lock




115 Medium Grey (P1 paintpricing.)





Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints (see color policy page14)

Application Notes

Multiple freestanding files orcabinets ( not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a couterweight (seeAccessories, page 76).




Critical Dimensions






Calibre

22



399 high lateral file, 1-13.59 receding door withfixed shelf, 1-129 drawer with hanging rails,1-10.59 drawer with hanging rails

309 399 C2F3930EMCD $1,454. $1,611. $1,692.

309 399 Y C2F3930CMCD 1,521. 1,672. 1,756.

369 399 C2F3936EMCD 1,622. 1,790. 1,882.

369 399 Y C2F3936CMCD 1,684. 1,854. 1,945.

429 399 C2F3942EMCD 1,849. 2,038. 2,141.

429 399 Y C2F3942CMCD 1,912. 2,104. 2,209.

Order Code



C Calibre Front

2 Generation Code

F File

39 399 High

30 309 Wide

C Knoll Lock









Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints (see color policy page14)

Application Notes

Multiple freestanding files orcabinets ( not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a couterweight (seeAccessories, page 76).




Critical Dimensions






Calibre

23

Cal

ibre

File

Col

lect

ion



459 high lateral file, 4-10.59 drawers withhanging rails

309 459 C2F4530EDDDD $1,755. $1,936. $2,036.

309 459 Y C2F4530CDDDD 1,817. 1,996. 2,101.

369 459 C2F4536EDDDD 1,979. 2,182. 2,294.

369 459 Y C2F4536CDDDD 2,040. 2,243. 2,358.

429 459 C2F4542EDDDD 2,209. 2,436. 2,560.

429 459 Y C2F4542CDDDD 2,273. 2,499. 2,625.

459 high lateral file, 1-13.59 receding door withfixed shelf, 1-1.59 tie bar, 2-13.59 receding doorswith fixed shelves

309 459 C2F4530EMKMM 1,714. 1,890. 1,988.

309 459 Y C2F4530CMKMM 1,780. 1,953. 2,055.

369 459 C2F4536EMKMM 1,812. 2,001. 2,106.

369 459 Y C2F4536CMKMM 1,875. 2,065. 2,169.

429 459 C2F4542EMKMM 2,096. 2,314. 2,429.

429 459 Y C2F4542CMKMM 2,162. 2,378. 2,497.

Order Code


Example: C2F4530CDDDD-115

C Calibre Front

2 Generation Code

F File

45 459 High

30 309 Wide

C Knoll Lock










Customer’s own non-metallic paintfinishes available at P2 pricing.This excludes metallic paints andwhite paints. (see color policy page14).

For reference shelf option substitutethe ‘‘K’’ in the pattern number witha ‘‘J’’. Add $178 list for referenceshelf.

Application Notes

Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three-high) should beweighted with a counterweight (seeAccessories page 76).




Critical Dimensions






Calibre

24




309 519 C2F5130ECCCC $1,772. $1,947. $2,053.

309 519 Y C2F5130CCCCC 1,835. 2,021. 2,125.

369 519 C2F5136ECCCC 1,991. 2,197. 2,310.

369 519 Y C2F5136CCCCC 2,060. 2,270. 2,382.

429 519 C2F5142ECCCC 2,226. 2,452. 2,569.

429 519 Y C2F5142CCCCC 2,286. 2,522. 2,647.

519 high lateral file, 4-129 receding doors withrollout shelves

309 519 C2F5130EZZZZ 2,072. 2,281. 2,400.

309 519 Y C2F5130CZZZZ 2,132. 2,356. 2,475.

369 519 C2F5136EZZZZ 2,301. 2,531. 2,663.

369 519 Y C2F5136CZZZZ 2,366. 2,602. 2,738.

429 519 C2F5142EZZZZ 2,522. 2,783. 2,919.

429 519 Y C2F5142CZZZZ 2,588. 2,852. 2,993.

519 high lateral file, 2-13.59 receding doors withfixed shelf, 2-10.59 drawers with hanging rails

309 519 C2F5130EMMDD 1,762. 1,944. 2,045.

309 519 Y C2F5130CMMDD 1,825. 2,008. 2,109.

369 519 C2F5136EMMDD 2,120. 2,338. 2,458.

369 519 Y C2F5136CMMDD 2,183. 2,401. 2,521.

429 519 C2F5142EMMDD 2,452. 2,701. 2,838.

429 519 Y C2F5142CMMDD 2,514. 2,764. 2,901.

Order Code



C Calibre Front

2 Generation Code

F File

51 519 High

30 309 Wide

C Knoll Lock








P3 = painted finishes



Application Notes

Multiple freestanding files orcabinets (not attached to walls orworksurfaces) should be ganged forsecurity. Single freestanding files(two and three high) should beweighted with a counterweight (seeAccessories, page 76)




Critical Dimensions






Calibre

25

Cal

ibre

File

Col

lect

ion



519 high lateral file, 1-10.59 drawer, 1-1.59 tiebar, 3-129 drawers with hanging rails

309 519 C2F5130EDKCCC $1,815. $2,003. $2,109.

309 519 Y C2F5130CDKCCC 1,880. 2,069. 2,171.

369 519 C2F5136EDKCCC 2,118. 2,334. 2,454.

369 519 Y C2F5136CDKCCC 2,176. 2,398. 2,516.

429 519 C2F5142EDKCCC 2,352. 2,591. 2,727.

429 519 Y C2F5142CDKCCC 2,415. 2,657. 2,788.

519 high lateral file, 1-13.59 receding door withfixed shelf, 1-1.59 tie bar, 1-129 drawer, 2-10.59drawers with hanging rails

309 519 C2F5130EMKCDD 1,817. 2,004. 2,112.

309 519 Y C2F5130CMKCDD 1,882. 2,072. 2,172.

369 519 C2F5136EMKCDD 2,170. 2,393. 2,516.

369 519 Y C2F5136CMKCDD 2,233. 2,459. 2,582.

429 519 C2F5142EMKCDD 2,496. 2,751. 2,890.

429 519 Y C2F5142CMKCDD 2,558. 2,815. 2,956.

519 high lateral file, 1-159 receding door withfixed shelf, 1-1.59 tie bar, 3-10.59 drawers withhanging rails

309 519 C2F5130ELKDDD 1,817. 2,004. 2,112.

309 519 Y C2F5130CLKDDD 1,882. 2,072. 2,172.

369 519 C2F5136ELKDDD 2,170. 2,393. 2,516.

369 519 Y C2F5136CLKDDD 2,233. 2,459. 2,582.

429 519 C2F5142ELKDDD 2,496. 2,751. 2,890.

429 519 Y C2F5142CLKDDD 2,558. 2,815. 2,956.

Order Code



C Calibre Front

2 Generation Code

F File

51 519 High

30 309 Wide

C Knoll Lock











Application Notes





Critical Dimensions






Calibre

26



549 high lateral file, 1-13.59 receding door withfixed shelf, 1-1.59 tie bar, 3-129 drawers withhanging rails

309 549 C2F5430EMKCCC $1,841. $2,030. $2,132.

309 549 Y C2F5430CMKCCC 1,907. 2,091. 2,201.

369 549 C2F5436EMKCCC 2,174. 2,400. 2,522.

369 549 Y C2F5436CMKCCC 2,240. 2,463. 2,587.

429 549 C2F5442EMKCCC 2,486. 2,745. 2,884.

429 549 Y C2F5442CMKCCC 2,552. 2,806. 2,948.

549 high lateral file, 1-159 receding door withfixed shelf, 3-129 drawers with hanging rails

309 549 C2F5430ELCCC 1,781. 1,964. 2,065.

309 549 Y C2F5430CLCCC 1,846. 2,028. 2,128.

369 549 C2F5436ELCCC 2,115. 2,333. 2,453.

369 549 Y C2F5436CLCCC 2,175. 2,395. 2,515.

429 549 C2F5442ELCCC 2,482. 2,737. 2,880.

429 549 Y C2F5442CLCCC 2,547. 2,800. 2,944.

549 high lateral file, 2-13.59 receding doors withfixed shelves, 2-129 drawers with hanging rails

309 549 C2F5430EMMCC 2,025. 2,234. 2,351.

309 549 Y C2F5430CMMCC 2,088. 2,301. 2,414.

369 549 C2F5436EMMCC 2,158. 2,378. 2,501.

369 549 Y C2F5436CMMCC 2,219. 2,442. 2,566.

429 549 C2F5442EMMCC 2,415. 2,663. 2,797.

429 549 Y C2F5442CMMCC 2,479. 2,728. 2,863.

Order Code


Example: C2F54130CMMCC-115

C Calibre Front

2 Generation Code

F File

54 54( High

30 30( Wide

C Knoll Lock

M 13.5( Receding Doorwith Fixed Shelf

M 13.5( Receding Doorwith Fixed Shelf

C 12( Drawer withHanging Rails

C 12( Drawer withHanging Rails








Application Notes





Critical Dimensions






Calibre

27

Cal

ibre

File

Col

lect

ion



55.59 high lateral file, 1-159 receding door withfixed shelves, 1-1.59tie bar, 3-129 drawers withhanging rails

309 55.59 C2F5530ELKCCC $1,853. $2,045. $2,147.

309 55.59 Y C2F5530CLKCCC 1,917. 2,109. 2,213.

369 55.59 C2F5536ELKCCC 2,182. 2,408. 2,529.

369 55.59 Y C2F5536CLKCCC 2,243. 2,469. 2,591.

429 55.59 C2F5542ELKCCC 2,516. 2,776. 2,918.

429 55.59 Y C2F5542CLKCCC 2,582. 2,838. 2,979.

55.59 high lateral file, 2-13.59 receding doorswith fixed shelf, 1-1.59 tie bar, 2-129 drawers withhanging rails

309 55.59 C2F5530EMMKCC 1,854. 2,046. 2,154.

309 55.59 Y C2F5530CMMKCC 1,918. 2,112. 2,214.

369 55.59 C2F5536EMMKCC 2,193. 2,416. 2,542.

369 55.59 Y C2F5536CMMKCC 2,252. 2,480. 2,607.

429 55.59 C2F5542EMMKCC 2,537. 2,796. 2,944.

429 55.59 Y C2F5542CMMKCC 2,602. 2,860. 3,007.

55.59 high lateral file, 5-10.59 drawers withhanging rails

309 55.59 C2F5530EDDDDD 1,991. 2,202. 2,312.

309 55.59 Y C2F5530CDDDDD 2,060. 2,267. 2,377.

369 55.59 C2F5536EDDDDD 2,241. 2,474. 2,597.

369 55.59 Y C2F5536CDDDDD 2,306. 2,536. 2,662.

429 55.59 C2F5542EDDDDD 2,486. 2,745. 2,884.

429 55.59 Y C2F5542CDDDDD 2,552. 2,806. 2,948.

Order Code


Example: C2F5530CDDDDD-115

C Calibre Front

2 Generation Code

F File

55 55.59 High

30 309 Wide

C Knoll Lock













Application Notes





Critical Dimensions

Actual Outside Case Height 55 11/329Actual Inside Case Height 52 1/29





Calibre

28



58.59 high lateral file, 1-13.59 receding door withfixed shelf, 4-10.59 drawers with hanging rails

309 58.59 C2F5830EMDDDD $2,099. $2,315. $2,436.

309 58.59 Y C2F5830CMDDDD 2,165. 2,379. 2,499.

369 58.59 C2F5836EMDDDD 2,459. 2,707. 2,847.

369 58.59 Y C2F5836CMDDDD 2,522. 2,776. 2,915.

429 58.59 C2F5842EMDDDD 2,665. 2,936. 3,089.

429 58.59 Y C2F5842CMDDDD 2,730. 3,006. 3,155.

58.59 high lateral file, 1-13.59 receding door withfixed shelf, 1-1.59 tie bar, 3-13.59 receding doorswith fixed shelf

309 58.59 C2F5830EMKMMM 1,880. 2,076. 2,183.

309 58.59 Y C2F5830CMKMMM 1,944. 2,136. 2,244.

369 58.59 C2F5836EMKMMM 2,232. 2,462. 2,588.

369 58.59 Y C2F5836CMKMMM 2,296. 2,524. 2,653.

429 58.59 C2F5842EMKMMM 2,597. 2,863. 3,015.

429 58.59 Y C2F5842CMKMMM 2,662. 2,925. 3,075.

58.59 high lateral file, 1-129 drawer with hangingrails, 1-10.59 drawer, 1-1.59 tie bar, 3-10.59drawers with hanging rails

309 58.59 C2F5830ECDKDDD 2,130. 2,353. 2,475.

309 58.59 Y C2F5830CCDKDDD 2,197. 2,416. 2,537.

369 58.59 C2F5836ECDKDDD 2,385. 2,633. 2,769.

369 58.59 Y C2F5836CCDKDDD 2,453. 2,699. 2,833.

429 58.59 C2F5842ECDKDDD 2,637. 2,910. 3,057.

429 58.59 Y C2F5842CCDKDDD 2,702. 2,972. 3,121.

Order Code


Example: C2F5830CAAKCC-115

C Calibre Front

2 Generation Code

F File

58 58.59 High

30 309 Wide

C Knoll Lock

A 10.59 Drawer withHanging Rails


K 1.59 Tie bar










Application Notes





Critical Dimensions

Actual Outside Case Height 58 11/329Actual Inside Case Height 55 1/29Calibre files are189 deep.




Calibre

29

Cal

ibre

File

Col

lect

ion



58.59 high lateral file, 2-159 drawers withhanging rails, 1-1.59 tie bar, 2-129 drawers withhanging rails

309 58.59 C2F5830EAAKCC $2,069. $2,280. $2,400.

309 58.59 Y C2F5830CAAKCC 2,130. 2,345. 2,463.

369 58.59 C2F5836EAAKCC 2,270. 2,501. 2,631.

369 58.59 Y C2F5836CAAKCC 2,333. 2,566. 2,695.

429 58.59 C2F5842EAAKCC 2,444. 2,699. 2,835.

429 58.59 Y C2F5842CAAKCC 2,510. 2,762. 2,899.

58.59 high lateral file, 3-10.59 drawers withhanging rails, 2-129 drawers with hanging rails

309 58.59 C2F5830EDDDCC 2,017. 2,226. 2,338.

309 58.59 Y C2F5830CDDDCC 2,081. 2,285. 2,401.

369 58.59 C2F5836EDDDCC 2,268. 2,499. 2,627.

369 58.59 Y C2F5836CDDDCC 2,332. 2,564. 2,694.

429 58.59 C2F5842EDDDCC 2,512. 2,771. 2,914.

429 58.59 Y C2F5842CDDDCC 2,574. 2,834. 2,976.

Order Code


Example: C2F5830CAAKCC-115

C Calibre Front

2 Generation Code

F File

58 58.59 High

30 309 Wide

C Knoll Lock



K 1.59 Tie bar










Application Notes





Critical Dimensions

Actual Outside Case Height 58 11/329Actual Inside Case Height 55 1/29Calibre files are189 deep.




Calibre

30



639 high lateral file, 1-129 receding door withpullout shelf, 4-129 drawers with hanging rails

309 639 C2F6330EZCCCC $2,122. $2,340. $2,458.

309 639 Y C2F6330CZCCCC 2,185. 2,409. 2,529.

369 639 C2F6336EZCCCC 2,378. 2,619. 2,752.

369 639 Y C2F6336CZCCCC 2,442. 2,690. 2,827.

429 639 C2F6342EZCCCC 2,661. 2,932. 3,077.

429 639 Y C2F6342CZCCCC 2,724. 3,000. 3,151.

639 high lateral file, 5-129 receding doors withfixed shelves

309 639 C2F6330ENNNNN 2,112. 2,327. 2,448.

309 639 Y C2F6330CNNNNN 2,172. 2,390. 2,512.

369 639 C2F6336ENNNNN 2,457. 2,705. 2,844.

369 639 Y C2F6336CNNNNN 2,520. 2,772. 2,912.

429 639 C2F6342ENNNNN 2,958. 3,258. 3,428.

429 639 Y C2F6342CNNNNN 3,024. 3,326. 3,491.

Order Code


Example: C2F6330CMMKDDD-115

C Calibre Front

2 Generation Code

F File

63 639 High

30 309 Wide

C Knoll Lock

M 13.59 Receding Doorwith Fixed Shelf


K 1.59 Tie bar











Application Notes





Critical Dimensions

Actual Outside Case Height 62 27/329Actual Inside Case Height 609Calibre files are 189 deep.




Calibre

31

Cal

ibre

File

Col

lect

ion



639 high lateral file, 5-129 receding doors withrollout shelves

309 639 C2F6330EZZZZZ $2,422. $2,671. $2,805.

309 639 Y C2F6330CZZZZZ 2,482. 2,739. 2,880.

369 639 C2F6336EZZZZZ 2,687. 2,952. 3,106.

369 639 Y C2F6336CZZZZZ 2,750. 3,024. 3,180.

429 639 C2F6342EZZZZZ 2,959. 3,268. 3,423.

429 639 Y C2F6342CZZZZZ 3,024. 3,339. 3,498.

639 high lateral file, 1-159 receding door withfixed shelf, 3-159 drawers with hanging rails

309 639 C2F6330ELAAA 2,023. 2,231. 2,345.

309 639 Y C2F6330CLAAA 2,085. 2,295. 2,411.

369 639 C2F6336ELAAA 2,321. 2,558. 2,691.

369 639 Y C2F6336CLAAA 2,382. 2,624. 2,753.

429 639 C2F6342ELAAA 2,712. 2,991. 3,148.

429 639 Y C2F6342CLAAA 2,779. 3,057. 3,209.

Order Code



C Calibre Front

2 Generation Code

F File

63 639 High

30 309 Wide

C Knoll Lock



K 1.59 Tie bar











Application Notes





Critical Dimensions

Actual Outside Case Height 62 27/329Actual Inside Case Height 609Calibre files are 189 deep.




Calibre

32



639 high lateral file, 4-159 receding doors withfixed shelf

309 639 C2F6330ELLLL $1,968. $2,170. $2,280.

309 639 Y C2F6330CLLLL 2,031. 2,233. 2,345.

369 639 C2F6336ELLLL 2,296. 2,532. 2,662.

369 639 Y C2F6336CLLLL 2,363. 2,596. 2,727.

429 639 C2F6342ELLLL 2,661. 2,932. 3,085.

429 639 Y C2F6342CLLLL 2,726. 2,994. 3,150.

639 high lateral file, 1-13.59 receding door withfixed shelf, 1-10.59 drawer, 3-129 drawers withhanging rails

309 639 C2F6330EMDCCC 2,197. 2,423. 2,547.

309 639 Y C2F6330CMDCCC 2,263. 2,486. 2,611.

369 639 C2F6336EMDCCC 2,454. 2,704. 2,842.

369 639 Y C2F6336CMDCCC 2,516. 2,771. 2,909.

429 639 C2F6342EMDCCC 2,839. 3,127. 3,293.

429 639 Y C2F6342CMDCCC 2,903. 3,194. 3,353.

Order Code



C Calibre Front

2 Generation Code

F File

63 639 High

30 309 Wide

C Knoll Lock



K 1.59 Tie bar






P1= painted fi

Documents

Calibre · module makes better use of space by more efficiently storing and maintaining files, binders, office supplies and other articles as compared to a traditional 3 planning