1

We also offer

Comprehensive Calibration Lab Packagesincluding Portables / Calibration Test Benches / Calibration Software / Test & Measuring

Instruments / Tools & Tackles etc.

TRAINER KITSTemperature / Pressure / Electrical

for Engineering Colleges/Training Institutions.

TMK 500

Our trainer kits are not prototypes or breadboarddesigns just to fulfill the basic requirements of practical

classes. Our motto is to offer the real and rightInstrument Trainer Kits, which will help the students to

receive hands-on training, for handling today’sCalibration, Test, Measurement and Process ControlInstruments. These value added knowledge will build-up the confidence (& competence) of the students topractice their duties, from the day one of employment

as expected by the employers.

IRMK 500

Brief Specifications / Features indicated in this catalog are for guidance only.For detailed / exact specifications/features please refer to individual product catalogs / data sheets.

Experience the Expertise!

Three Decades of Dedicated / Distinguished Service to Industry!Over 5000 Portables & 200 Test Benches performing satisfactorily in INDIA & scores of Portables &Test Benches performing well in North & South America / Europe / United Kingdom / Middle East /

South East & Far East Asia / Africa etc.

for further details :visit our website / ask for Product CD & for detailed interaction, contact

N A G M A NINSTRUMENTS & ELECTRONICS (P) LTD.

– Comprehensive Calibration Solutions – (Standards / Systems / Packages / Software / Services)

“Nagman Complex”, 27th KM Stone, Chennai-Bangalore NH-4,Nazarathpet (Via.),Chembarambakkam, Chennai – 602 103. I N D I A.

Phone (Board) +91-44-26811700, 26811702 Exports 26811704, 26811708 Fax 26811703Mail nagman@md2.vsnl.net.in Site www.nagman.com

Your Local Contact / Distributor

ComprehensiveCALIBRATION

Solutions

The unique Nagman advantage ….

Pressure

Temperature

AccreditedCALIBRATION

Service

StandardsSystems

PackagesSoftwareServices

Signal(Electrical/Electronic)

ConsultancyTraining

2

NAGMAN – brief profile….

Nagman is a 3 decade old wellestablished InstrumentationGroup in India, manufacturing &marketing Portable Calibrators,Calibration Test Benches &Calibration ManagementSoftware for Temperature /Pressure & Electrical Parameters.Other products include DeadWeight & Comparison Testers.

Nagman’s long years of close association including Training & Technical co-operation(for assembling select products, marketing, servicing & recalibrating) with several reputedworld leaders in the field of calibration including M/s. Ametek Jofra (Denmark);Pressurements / S.I. Pressure Instruments, England; Eurotron, Italy; Revue Thommen,Switzerland; Tradinco, The Netherlands had certainly helped Nagman refine & improvetheir calibration products to make them truly world class today.

Nagman's sophisticated "Centre for Calibration", accredited – for Thermal / Mechanical(Mass & Pressure) & Electro-Technical parameters - by NABL (equivalent to UKAS) lendable Quality (ISO 17025) support & Traceability to Nagman's Calibration products inaddition to offering a wide range of Calibration Services to Industries.

Nagman have sold over 5000 Portables & 200 Calibration Test Benches to industryleaders in India & have also exported scores of their products to over 30 countriesaround the globe spread thro' all continents - America, Europe, Asia, Africa & Australiaagainst stiff competition from world leaders including M/s. Beamex / Scandura / GE (Druck)/ Ametek / Fluke-Hart / Isotech etc.

Nagman have succeeded in getting their Temperature Calibrators (select models)evaluated by CSA & certified for CE/CSA (US), once again stressing the 'reliability'factor!

With all these & more, Nagman offer their wide product range at highly competitive &cost effective rates!

Today Nagman offer more than mere products - Comprehensive Calibration Solutions -thro' their - Calibration Standards / Systems / Software / Services - including TotalCalibration Lab Packages.

At Nagman, a competent & trained Product Development Team works continuously todevelop & introduce on an average 2/3 new/innovative products every year in addition toproduct improvement / enhancement of current products. Nagman’s flexibility &capability to customize their products, therefore are fairly unlimited!

Call us & experience the expertise of Nagman - the one stop Calibration Solutionprovider!

TEMPERATURE CALIBRATORS- the comprehensive range of Nagman’s DRY BLOCKS / STIRRED BATHS / BLACK

BODY SOURCES cover a very wide range from -40°C to 1500°C.

BASIC MODELS

Low / Medium Temperature Calibrators (350E / 650E) *Range Ambient to 350/650°C, Accuracy : Better than ±1°C/±1.5°C,Resolution 0.1/1°C, Stability ±0.2°C / ±0.3°C, ±0.3°C/±0.5°C, MultiholeInsert 120 mm Immersion

Heavy Duty Low / Medium Temperature Calibrators(350 H / H2, 650 H / H2) *Range Ambient to 350 / 650°C, Accuracy ±1°C (350 H/H2), ±1.5°C(650 H/H2), Resolution 0.1/1°C, Stability ±0.3 upto ±0.6°C,Interchangeable Thermowells: OD 25 mm, Immersion Depth 120/200mm.

Economy Calibrators (ETC 600 / 600-2)Range Ambient to 600°C, Accuracy ±0.1%/0.15% FS, Resolution 1°C,Stability ± 0.5°C, Interchangeable Thermowells, OD 25 mm, ImmersionDepth 120/200 mm

High Temperature (1200 HN) *Range 300 to 1200°C, Accuracy ±3°C, Stability ±0.5°C (upto 600°C) &±1°C (above 600°C), Multihole Inserts, Immersion Dia/Depth 40 / 120mm

Very High Temperature (1500 HN) *Range 500°C to 1500°C, Accuracy 0.5% of span, Stability ±2°C,Interchangeable, Single / Multihole Inserts, 200 mm Immersion.

ADVANCED HIGH ACCURACY MODELS

Higher Accuracy / Stability / Resolution / Interchangeable Thermowells – Single / Multihole,mA measurement, Tx Supply, Programmable slope rate.

Microprocessor based Temperature Calibrator - MP 40RRange -40 from Ambient to 123°C, Accuracy ±0.3°C, Resolution 0.1°C,Stability ±0.05°C, Well Dia/Depth 19 / 100 mm.

Microprocessor based Temperature Calibrator - MP 650Range 50 to 650°C, Accuracy ±0.7°C, Resolution 0.1°C, Stability±0.06°C, Well Dia/Depth 26/110 mm

Microprocessor based Temperature Calibrator - MP 1200Range 300 to 1200°C, Accuracy ±2°C, Stability ±0.5°C, Well Dia/Depth12.5/105 mm

Microprocessor based 2-in-1 Hot Cold Temperature Calibrator –MP40R / 650Range : –40 from Ambient to 650°C, other features / specifications perMP40R, MP650, Space Saver.

3

Microprocessor based Universal Temperature Calibrator- MTC 650With measurement capability for most Thermocouples, RTDs,mV/mA/Resistance etc., Range 50 to 650°C, Accuracy ± 0.6°C,Resolution 0.1°C, Stability ±0.05%, Immersion Depth/Dia 110 / 25 mm

Micro Oil Bath (MOB 250) *Portability of Dry Block & Precision of Oil Bath, Range : Ambient to250°C, Accuracy 0.6°C, Stability 0.1°C, Working Chamber Dia / Depth95 mm / 120 mm.

Fluidized Bath (FB 06 S/L)Range : 50 to 600°C, Accuracy ±1.5°C, Resolution 1°C, Stability ±0.5to 1°C, Working Chamber 165/225 mm Dia x 250/400 mm Depth.

– A Miniature / Portable Model, ideal for field use is nowavailable : Range 500°C, Accuracy ±1°C, Stability±0.5°C, Working Chamber Dia/Depth 100/200 mm.

Cryostatic Bath (CR-04)Range : -40°C to 100°C, Resolution ±0.1°C, Accuracy ±0.7°C,Uniformity ±0.1°C, Working Chamber 150 x 150 mm, ImmersionDepth 250 mm

Hot Cold Bath (HC-09)2-in-1 Bath, Fluidized & Cryostatic Bath – space saver – specifications/features per FB 06-S / CR-04.

Black Body Calibration System (BBS-VL)Range 10°C above Ambient to 350°C, Resolution 0.1°C, Accuracy<0.5% reading (Min. 1°C), Stability ±0.5°C, Aperture ∅ 25 mm,Emissivity 0.97 to 0.98

Black Body Calibration System (BBSL) *Range 20°C above Ambient to 600°C, Resolution 0.1/1°C, Accuracy<0.5% reading (Min 2°C), Stability ±0.5°C, Aperture ∅ 12.5 mm,Emissivity 0.97 to 0.98

Black Body Calibration System (BBSH) *Range : 500 to 1200°C, Resolution 1°C, Accuracy <0.5% reading (Min.3°C), Stability ±1.5°C, Aperture ∅ 25 mm, Emissivity better than 0.97

* These Models are also available with CE/CSA (US) Certification.

All Models except ETC are available with RS-232 Interface & “CALTEMP” CalibrationSoftware option.

PRESSURE CALIBRATORS / STANDARDS /TESTERS

- the total range Digital Smart Calibrators / Dead Weight Testers / ComparisonTesters / Master Gauges / Manometers

PRESSURE CALIBRATORS

Microprocessor based Smart Pressure Calibrator (MPC-E) -Budget SolutionsRanges : ±2000 / ±5000 / ±8000 mmWC; -0.85 to 2 upto 40 Bar(Pneumatic); 0 to 70 upto 700 Bar (Hydraulic), Resolution : Minimum4½ Digits, Accuracy : ±0.15%/0.1% FS, mA Measurement, MultipleEngineering Units selection. (This range effectively replaces Nagman’swell established (VLPC / LPC / PCI Series Digital Calibrators).

Advanced Microprocessor based Smart Pressure Calibrator(MPC)Ranges : Pneumatic : -0.85 to 2 upto 40 bar; Hydraulic : 0 to 70 upto700 bar, Resolution : Minimum 5 Digits, Accuracy (0 to 50°C

Automatic Temperature Compensated) : ±0.05% FS., MultipleEngineering Units selection, mA/V measurement, Mean/Peak/ValleyMeasurement, all Media Compatible.

Benchtop/Panel Mounted – Microprocessor based PressureCalibrators/Modules (MPC-E-B/MPC-B)Ranges/Features as above, dual range option available.

MPC-E-BL/MPC-BLModels with built-in Integral Pumps & Vernier– for Pneumatic Low/Very Low Pressure Ranges upto 5 Bar.

Digital Pressure Controller – Model DPCRange 0 upto 10 bar, Resolution 0.00, Accuracy 0.2% FS;(external Pressure Source required)

For all the above Models, a wide variety of External matchingPneumatic/Hydraulic Hand Pumps with Vernier are available (seeunder Hand Pumps).

MPC / MPC-B Series models are available with Rs-232 ComputerInterface & “CALPRESS” Calibration Software option.

Certified *

4

HAND PUMPS

– A wide variety of External Hand Pumps – Pneumatic / Hydraulic – with FineAdjustment Vernier are offered to match the Pressure Calibrators above (also seeunder Comparison Testers).

Pneumatic

Model A-100 A-101 F3280013/PTP2Features Handheld Handheld HandheldRange 0 to 5 Bar -750 mBar (Vac) -0.8 to 2 BarFine Adjustment Vernier Vernier VernierMedium Air Air Air

Pneumatic

Model PTP-15 PTP-20 F3280019/PTP-40Features Handheld Handheld HandheldRange -0.85 to 15 Bar -0.85 to 20 Bar -0.95 to 40 BarFine Adjustment Vernier Vernier VernierMedium Air Air Air

Hydraulic

Model HPOV XHPOV GCL 250 SP/350 SP

GCH 500 HP / MHP600

Features Handheld Handheld Tabletop Screw Pump Tabletop Hand PumpRange 200 Bar 350 Bar 250 / 350 Bar 500 / 600 Bar

Fine Adjustment Vernier Vernier Vernier Divider Block withVernier

Medium Water/Oil Water/Oil Water/Oil Oil onlyCubic Capacity 100 cc 100 cc 75 cc (Reservoir) 300 cc

Hydraulic

Model GCH 700 HP /P-141 HTP-1/F3280015 GCH 600 / 700

SPB GCH 600 SPHD

Features Tabletop HandPump Handheld Tabletop Screw

PumpTable Top Screw

PumpRange 700 Bar 700 Bar 600 / 700 Bar 600 Bar

Fine Adjustment Divider Block withVernier (Nagman) Vernier --- ---

Medium Oil only Water/Oil Oil/Water OilCubic Capacity 328 cc 100 cc --- ---

Accessories : Adapters : /8", 1/4", 3/8", 1/2" - NPT (BSP on request) / Hoses / GaugeManifold Blocks / Carry Case.

DEAD WEIGHT TESTERS- Modules / Accuracies to suit every budget / need

Hydraulic Dead Weight Testers - 3000 / 6000 Series *

Oil operated, Screw Pump with built-in Priming Pump & Ram Screw,

Single/Dual Piston, Ranges : upto 600 bar, Accuracies : 0.1%/0.05% &

0.025% of rdg., Units : Bar / Kg/Cm2 / PSI

Hydraulic Dead Weight Testers - 4000 / 7000 Series *

Oil operated, Hand Pump with Vernier Adjustment, Single/Dual Piston,

Range : 600 bar, Accuracies : 0.1% / 0.05% & 0.025% of rdg., Units :

Bar / Kg/Cm2 / PSI.

* Special Range : 700 bar/Higher Accuracy : 0.02% available.

Consult us.

Pneumatic Dead Weight Testers - 5000 / 8000 Series

Air / Gas operated, Pressure & Vacuum (Conversion Kit), Single

Piston, Ranges : from Vacuum upto 35 bar, Accuracies 0.1% / 0.05%

& 0.025% reading, Units: Bar / Kg/Cm2 / PSI; Vacuum : mBar/mmHg.

Common for above 3 Series :Traceable Calibration Certificate :

– 0.1% Model : Certificate for overall Accuracy

– 0.05% & 0.025% Models : Certificate for overall Accuracy, PCU

(area) & Weights (Mass)

– 0.025% Model : Certificate issued by NABL Accredited Centre for

Calibration

– Weight Set in Wooden Carrying Case.

Options : Motorized operation / Tripod mounting.

Hydraulic Deadweight Testers - PHS 9000 Series

Oil operated Vertical/Horizontal type Ram Screw Pump with built-in

Priming Pump, Single/Dual Piston, Weights/Pump all mounted in

sturdy wooden box ready for field operation : Range : upto 600 bar,

Accuracy (std.) 0.05% rdg., Units : Bar / Kg/cm2 / PSI.

2-in-1 Comparison Tester cum Dead Weight Tester

Economy/Budget solution Models.

5

COMPARISON TESTERS

- Widest Range – Oil / Water operated, Screw/Hand Pump Models.

Model : GCL 250-SP

A simple Ram Screw Pump with Oil Reservoir for priming, Fine

Adjustment of Pressure, Range : 0 to 250 Bar (350 Bar - optional),

Water / Oil operated, Gauge Fitting : 1/2" BSP (F) (Swivel)

Models : GCH 500-HP / GCH 700-HP

Hydraulic Hand Pump fitted with a Divider Block / Fine Adjustment

Vernier. Ideal for volume applications, Range : 0 to 500 / 700 Bar, Oil

operated, Gauge fitting : 1/2" BSP (F)(Swivel)

Model : GCH 600-SPB

Hydraulic Ram Screw Pump fitted with Oil reservoir for priming & a

manifold block. Mounted on a sturdy base plate, Range : 0 to 600 Bar

(700 Bar - optional), Medium : Oil (optional Water), Gauge fitting : ½"

BSP (F) (Swivel)

This model can also double as a Single Piston Dead Weight Tester

with optional PCU & Weight Sets (Accuracy : 0.2% rdg.)

Model : GCH 600-SPES

Hydraulic Ram Screw Pump fitted with Oil reservoir for priming & a

manifold block. Mounted on an elevated stand, Range : 0 to 600 Bar

(700 Bar - optional), Medium : Oil, Gauge fitting : 1/2" BSP (F) (Swivel)

Models : GCH 600-SPHD / GCH 600-SPHD/DWT (2-in-1)

Heavy duty model with Hydraulic Ram Screw Pump with Oil reservoir,

Priming Pump, Isolating Valve & 3 gauge stand all housed in a sturdy

sheet metal (carry) box (with lid).

This "Deluxe" model can also double as a Single Piston Dead Weight

Tester with optional PCU & weight sets (accuracy of 0.2% Reading),

Range: upto 600 Bar, Medium : Oil, Gauge fitting : 1/2" BSP (F)

(Swivel).

MASTER / STANDARD GAUGES– Analog & Digital - to go with Comparison / Dead Weight Testers

ANALOGRange 0 upto 600 Bar (all Standard DIN Ranges),Accuracy : ±0.5% / ±0.25% / 0.1% F.S.

Dial Size : 160 / 250 mmFine Resolution Dial & Knife Edge Micro-pointer with Zero AdjusterGauge Connections : 1/4" or 1/2" BSP (M)

DIGITALRange : 0 upto 600 Bar (most standard DIN ranges), Accuracy : ±0.2%F.S., Display / Resolution : 4 digit, Gauge Connections : 1/4" or 1/2"BSP (M)

Note : Digital Indicator Models with Higher Accuracy, upto 0.05% FSwith higher resolution, multiple engineering scales, mA input, RS-232Computer Interface / Calibration Software, Battery Charger etc. – referunder Digital Smart Calibrators (MPC / MPC-E).

MANOMETERS– U-Tube / Single Limb / Inclined

SINGLE LIMB WELL TYPE MANOMETER - Direct Reading, Model :MM-111Accurate Measurement of Pressure, Vacuum or Differential Pressure.Wall/Flush/Base Mounting, Mercury/Water Filling , Ranges : 60 upto250 cms / 24 upto 100 Inches, Resolution : 1 mm / 0.1 inch, Std.Accuracy : ±0.2% ±0.5 mm

‘U’ TUBE MANOMETER – Model : MM 103Wall/Flush/Base Mounting, Mercury/Water Filling, Measurement ofDifferential Pressure, Pressure & Vacuum. Ranges from 120-0-120

upto 1000-0-1000 mm, Resolution : 1 mm, Std. Accuracy : ±0.2% ±0.5mm

INCLINED MANOMETER – Model : IM-113Wall/Flush/Base MountingTo measure very low pressure, low draft or small differential pressurechanges in gas flow metering etc.

Ranges : 12 upto 750 mm, Resolution : 0.1/0.25/0.5/1 mm,

Accuracy : ±0.25% + 1 division.

6

SIGNAL CALIBRATORS– Ideal for Quick Loop Checking & Calibration of Transmitters,

Simulation / Measurement of mV, mA (& Resistance).

Loop Calibrator (MAC / mVmA)

Accuracy : 0.1% FS, Resolution : 0.01 mA / 0.01%Display range : 0.00 to 25 mA / 0.00 to 199.99 mVOutput range : 0 – 25 mA / 0 to 199.99 continuously

Loop Calibrator – Improved Features (mVmA+R)

– Accuracy : ±0.1% FS, Display : 4½ Digit LCD– Input (Measurement) Range : 0.00 to 25.00 mA/0.00 to 199.99

mV / 0.00 to 1999.9 Ω– Output (Simulation) Range : 0 to 25 mA/0 to 199.99 mV/0 to

999.9 Ω *– Resolution : 0.01 mA/0.01 mV/0.1 Ω

* (thro’ multiturn pot)

Dual Channel Multifunction Calibrator - Model : MSC-U

Dual Channel, Accurate, Rugged, Compact & easy to use,Measurement & Simulation of mA, mV, V, Ohms, RTDs, TCs, Scales :°C / °F, Menu Driven Operation, Rj Compensation, Programmable SetPoints, 2 x 16 LCD Display, Basic Accuracy 0.03% F.S., TouchMembrane Key Board, Mains / Battery Operation, Carry Case withShoulder Strap.

TEMPERATURE SENSORS

Nagman have pioneered manufacturing Temperature Sensors –Platinum / Nickel & Copper - in India – especially custom designed- to International Standards & have, over the past 3 decades, beeninvolved actively in the manufacture of Thermocouple / RTD –Elements / Inserts / Probes / Assemblies, tens of thousand of whichare in good use in industries – in India and overseas.

These Probes & Assemblies, produced to meet stringent InternationalQuality Standards are also available in extensive custom designconfigurations offering ultimate flexibility.

Thermocouples / RTDs – all ISA / IEC types. Elements / Inserts /Probes – custom designed Assemblies with Bar Stock. Built-upThermowells – flanged / screw connections.

Working Standard RTDs/Thermocouples - with TraceableCalibration Certificate – 1/2, 1/3 DIN RTDs, 1/2 ANSI Thermocouples.

CALIBRATION TEST BENCHES & SYSTEMS– Primary & Secondary Standards

Comprehensive Range covering Manual / Semi-Automatic / AutomaticCalibration of Pressure / Temperature / Electrical parameters

Powerful tools for Total Quality Management & ISO Conformances.

Modular design with space for future add-ons, compact & sleek WorkStation furniture – Table / Under bench Cabinet / Bench-top etc.

Offers ultimate flexibility thro’ custom configuration / preferencesenabling incorporation of world’s best furniture, utility modules,calibration standards & test and measuring instruments.

Accuracy of Calibration Modules traceable to International Standards.

SYSTEM 1000 / 1100 / 1200PRIMARY STANDARD PRESSURE CALIBRATION WORKSTATION- the Ultimate Primary Standard

includes– ‘Betz’ Micromanometers / Precision Manometers– Pneumatic & Hydraulic Dead Weight Testers– Cascading Digital Analog Pressure / Vacuum Indicator /

Gauges– Precision Multifunction Calibrator– Continuity Tester– Precision Digital Multimeter– Air Set & Pressure / Vacuum generation & Control– Stabilized DC / Variable AC Power Supply.Option : Can be integrated with the powerful Calman* Software.

SYSTEM 2000MODULAR CALIBRATION SYSTEM- the Versatile Secondary Standard Bench / Table Top – Trolley Mounted

includes– Temperature Calibrators (Digital/Microprocessor based) – rack

mounted with separate heating / cooling towers– Pressure Calibrators (Digital/Microprocessor based) –

Pneumatic/Hydraulic - rack mounted with separate Hand Pumps– High Accuracy Multifunction Calibrator & Digital Multimeter

(optional)– Standard AC/DC, Fixed/Variable Power Supplies

7

SYSTEM 3000 / 3600PRESSURE CALIBRATION WORK STATION- the versatile Secondary Pressure Standard

includes– Digital / Microprocessor based Pressure Calibrators - Pneumatic

and Hydraulic with matching external Hand Pumps with vernieradjustment

– Preset Digital Pressure Controller / Precision MultifunctionCalibrator / Digital Multimeter.

– Standard DC / AC, Fixed / variable power supplies– Air SetOptional Calman* Calibration Management Software

SYSTEM 5000MODULAR CALIBRATION SYSTEM- for Electrical / Electronic Instruments - the Ultimate ElectricalWorkstation

– Designed to meet the Testing / Calibration requirements ofPower Sector / Petrochemicals / Refineries etc., - includes

– 3 & 1 Phase Multifunction Precision Power Meter (& matchingAC/DC V/A supply source).

– High Accuracy Multi-function Calibrator– Function Generator– Precision Digital Multimeter– Precision Decade Resistance Box– Fixed DC Power Supplies ±5 to ±48 V & or Adjustable DC Power

Supply (0 to 30/60 V)– Stabilized / Variable AC Power Supply– Air Supply Module– Soldering / De-Soldering Station– Continuity Tester & Socket PanelOptional : Anti-static protection.

SYSTEM 6000† / 7000TEMPERATURE CALIBRATION BENCH– the Heavy Duty Temperature Work Horse– Suitable for simultaneous checking / Calibration of multiple, bulk &

odd size Sensors :– includes– Cryostatic Bath (-40 to 100°C)– Fluidized Bath (50°C to 600°C)– Precision Standard Reference Glass Thermometers Set– High Precision 6½ digit Digital Multimeter– Transmitter Power Supply (24VDC) & Continuity Tester– Air Supply Module– Thermally insulated Bench-top† System 6000 (Tempcal) offers a combination of Nagman Dry BlockCalibrators & other Utilities as above.

Optional : can be upgraded to Computer Aided Calibration System forAutomatic / Semi-Automatic Calibration – using Nagman’s Caltemp /Calman Software.

SYSTEM 9000† / 9600COMPUTER AIDED CALIBRATION WORKSTATION– (for Temperature, Pressure & Electrical Parameters)

the Ultimate (Automatic) Calibration System

includes– 2 or 3 µP based High Accuracy Dry Block Temperature

Calibrators mounted ready for use (-40°C to 1200°C)– 2 or 3 µP based Pressure Modules (Vacuum to 700 bar) rack

mounted with separate Hand Pumps & Verniers; Accuracy upto0.025% FS)

– Preset Digital Pressure Controller– Very High Precision Digital Multifunction Calibrator– Optional : 3 & 1 Phase Multifunction Power Meter & matching

AC/DC V/A Supply Sources.– High Precision Digital Multimeter– Standard AC/DC, Fixed/Variable Power Supplies– Air Supply Module– Space for Computer, Monitor, Keyboard & Printer

The entire System integrated with the powerful Calman* Software ofNagman for Automatic / Semi-Automatic / Manual Calibration &generation of Certificates per ISO Standards.

† System 9000 (Multical) offers Nagman Temperature / PressureCalibrator Modules & other Utilities as above but without ComputerInterface.

An array of the Test Benches SUPPLIED TO OVERSEAS customers :

Electrical Test Bench Electronic Test Bench Pneumatic Test BenchOman Gas Company

Multifunction Test BenchTISCO, Qatar

Computer AidedCalibration Workstation

NED University, Pakistan

Electrical Test BenchExxon Mobil, Chad

8

CALIBRATION MANAGEMENT SOFTWARECALMAN – the Calibration Management Software

The NAGMAN’s CALMAN (Calibration Management) Software is apowerful tool for calibration of devices in the process industries underthe present day quality guidelines such as ISO 9000. The CALMANautomates the process of calibration and certification making themquicker and easier.

This software has been developed with our experience/knowledge of the calibrationsoftwares of the various reputed international manufacturers & in the current stage ofdevelopment, Calman Software supports, in addition to Nagman’s own range ofTemperature / Pressure / Signal Calibrators, several world brand Calibrators, Test &Measuring Instruments including

– Array Electronic Co. Ltd., China– Agilent Technologies (H.P), U.S.A.– Ametek Jofra, Denmark– Beamex, Finland– Brainchild Electronic Co. Ltd., Taiwan– Cal Controls, U.K.– GE Druck, U.K. (Unomat, SI Pressure Instruments)

– Hsiang Cheng Electric Corporation, Taiwan– Escorts, Taiwan– Eurotron, Italy– Fluke, U.S.A.– Revue Thommen, Switzerland– Tradinco Instruments, The Netherlands– Yokogawa, Japan

& enables perform semi-automatic / automatic calibration & certificate generation. Ourmotto was “to develop a single software which could communicate with diverseinstruments” making automatic calibration user friendly, simpler & easier.

In addition to these listed Instruments, Nagman has the capability to develop Drivers forother Model Calibrators / Instruments.

The Calman Software Package built on Modular concept offersutmost flexibility enabling the user to choose any combination from theabove “List” of Instruments, with possibility of future Add-on’s (peruser requirement) on modular basis!

This unique feature of CALMAN with ability to communicate withdiverse instruments helps to save considerable cost on investment andbeing a single dedicated programme reduces chances forconfusion/mistakes during calibration.

The historical data storage format of CALMAN helps the user to ascertain the performanceof the instrument over a period of time and enables him to fix up optimum recalibrationintervals for instruments.

The CALMAN overcomes many inherent deficiencies of othersoftwares and major among them is the “Dedicated Manufacturer –Dedicated Software Nexus”.

Calman has the capability to integrate the entire Calibration System ina Plant & uplink to the Centralized ERP System.

CALTEMP – the Temperature Calibration Software

Caltemp is a dedicated simple & cost effective TemperatureCalibration software which enables & supports automatic/semi-automatic calibration thro’ Nagman Dry Block Calibrators, Micro OilBath & Fluidized / Hot Cold Baths.

This Windows 95/98 platform based software offers an easy method for calibrating,datalogging and managing your calibration data.

CALPRESS – the Pressure Calibration Software

Calpress is a dedicated & cost effective Calibration Software whichenables & supports automatic / semi-automatic calibration thro’Nagman’s Pressure Calibrator MPC & MPC-E Series.

Fully Automatic Calibration is possible with the help of AutomaticPressure Controller & Gas / Air Pressure Source.

Multipoint : Upto 6 Calibrations at a time are possible using the ‘Scanner Module” –optional.

DATAMAN – the Data Management Software

For maintenance of instruments & calibration records. The Dataman is a cost effectivesolution for collecting and maintaining instrument / calibration data etc. By using Dataman thefollowing activities are achievable:

Collection of Instrument Maintenance / Calibration Records; Manual entry of data; printing ofCalibration Reports.

CALIBRATION SERVICES– “Centre for Calibration”

Nagman’s “Centre for Calibration” is accredited (as per ISO/IEC17025) by NABL (equivalent to UKAS) (MRA Signatory & Constituentof ILAC) for Thermal / Mechanical (Mass & Pressure) & Electro-Technical Parameters.

The sophisticated Calibration facility – both Primary & WorkingTransfer Standards – include

- Cross Float Dead Weight Tester Calibration equipment- High Precision Manometer (±0.1 mm) & Micromanometer

(±0.01 mm)- Ultra Low Pressure Calibrator (0.1 Pa)- Multifunction Universal Electrical Calibration – Wavetek 9100- Standard Black Body Sources (1200°C)- Ultra High Temperature Calibrator (1500°C)

The Calibration Accuracy of these Master Standards are Traceableto National & International Standards. Facility includesComputerized Automatic Calibration & Report generationconforming to ISO Standards.

All Nagman Calibrators are supplied with Calibration Certificatestraceable to this “Centre for Calibration”.

Nagman’s “Centre for Calibration” also offers a wide range ofCalibration Services including Consultancy – for setting upCalibration Lab & obtaining Accreditation, Training / Seminars onCalibration Techniques & Practices.