AUGUSTFLYER

• JET bolt cutters are designed to cut soft and medium grade bolts, rods, rivets, bar and chain

JET731114 - 14” $42.95JET731124 - 24” $68.00

JET731130 - 30” $95.00

• NEW! - Serrated cutting edges cut with less hand force and prevents material from slipping

Bolt Cutter - Heavy Duty

JET731118 - 18” $52.95

Torque Wrench – HEAVY DUTY / SLIM HEAD / 24” LONG

JET719069 - 1/2” Drive 30-250 Ft/Lbs $179.00

Torque Wrench – Standard & Heavy Duty

• 24 tooth Chrome Vanadium ratchet gear (Chrome Molybdenum on 3/4" model)• Reversible ratchet• Dual ft/lbs and Nm scales• Patented lock ring• Comfortable ergonomic handle grip• Complete with protective blow mould case

JET718902 - 1/4” Drive 40-250 In/Lbs $92.95

JET718906 - 3/8” Drive 10-80 Ft/Lbs $132.00

JET718912 - 1/2” Drive 50-250 Ft/Lbs $149.95

Now a proud supplier of

See the inside page for more info

Including great deals and new products fromREED INSTRUMENTS, CMT CUTTING TOOLS .....and much more

REER5100

AC Voltage Detector

REEC-380

Refrigerant Leak Detector

REER8052

Sound Level Meter

REEST-118

Multimeter/Voltage Detector

REECO-180

Carbon Monoxide MeterCarbon Monoxide Meter

REER5010

Multimeter/Voltage Detector

REER6010

Moisture Detector

REER2001

Infrared Thermometer

REER5040

Clamp Meter

The REED Refrigerant Leak detector has many features such as detects and pinpoints even small leaks of refrigerant gases, instantaneous response time and no user calibration required. The gases the Leak Detector senses are:CFCs: R11, R12, R13;HCFCs: R22, R502, R500;HFCs: R134a, R123, R125, R23, R404A, R407C, R410A and other halogen based compounds

$204.95

The REED R2001 Infrared Thermometer is useful for measuring temperature in applications where conventional sensors cannot be employed. Specifically, in cases dealing with moving objects ( i.e.,

rollers, moving machinery, or a conveyor belt), or where distances are too great, or

the temperatures to be measured are too high for thermocouples or other contact sensors. This

infrared thermometer is so easy to use as well...just point and shoot! Temperature Range: -58 to 536°F (-50 to 280°C)

$48.95

True RMS AC/DC Voltage and current measurements40,000 count resolutionMeasures frequency, capacitance and temperature.Diode check and continuity testBacklit LCD readout with analog bar graph1000V input production on all ranges4-20 mA process loop measurements with % readoutData hold, Max/Min recording modePeak capture modeUL approvedIP67 dust and waterproofEN61010-1 Cat. IV 600V, Cat. III 1000V

••••••••••••

$128.99

The REED ST-118 is a combination digital multimeter and non-contact voltage detector that also features a built-in flashlight. Practical and economical, the compact ST-118 measures AC and DC voltage and current, and resistance as well as it detects, without contact, live-not live voltage on electrical circuits found in residential, commercial and industrial buildings $40.99

$201.99$188.00 $210.95

The Reed CO-180 Carbon Monoxide Meter makes it easy to take quick and accurate measurements of CO levels with a single compact instrument. Featuring the newest generation of electrochemical sensors, the CO-180 responds very quickly to ambient changes in carbon monoxide concentra-tion without the use of a pump.

Measures AC and DC voltageand current, resistance, capacitance and frequency aswell as temperature with theincluded type K thermocoupleprobe. • True RMS AC Measurements • Diode and continuity test with beeper • Data hold function

Detects moisture content in buildingmaterials of all kinds, as well asdetects moisture distribution in walls,ceilings and floors. • Classifies moisture status as: Dry, at risk or wet. • Display hold button • Max / Min function with alarm indication

$20.99 $158.00

Utilize a specially fluidized and siliconized mono ammonium phosphate dry chemical. It chemically insulates Class A fires by melting at approximately 350°F and coats surface to which it is applied. It smothers and breaks the chain reaction of Class B fires and will not conduct electricity back to the operator.

• 6 year warranty• Stored Pressure Design• Large loop pull pin• All metal valve construction• Dependable drawn steel cylinders• Temperature range -65°F to 120°F• Easy and more economical to maintain and service• Durable high gloss polyester powder paint

ABC or Multi-Purpose Extinguishers

AMXB417TX 2.5lb Vehicle Bracket $36.99

AMXB500X5lb Vehicle Bracket $48.00

AMXA411X20lb Wall Bracket $134.95

AMXB500TX5lb Wall Bracket $49.00

AMXB456X10lb Wall Bracket $75.00

Certified - Ready for Use!

ABC or Multi-Purpose Extinguishers

Application: for sizing cuts, perfect finish on both sides of double-sided laminated panels without using scoring blades.Machines: Table and vertical saws, sizing and portable machines.Material: single or double-sided laminated panels with coating and veneered.

210 - Series: Industrial Fine Cut-Off for Melamine

CMT210.080.10 - 10” x 80T $83.95

CMT210.096.12 - 12” x 96T $118.00

Application: for fine finish crosscuts. The 5° negative hook limits splintering and “climbing.”Machines: Radial arm saws and sliding compound miter saws.Material: Soft and hardwood, plywood and two-sided laminates.

219 - Series: Industrial Sliding Compound Miter & Radial

CMT219.080.10 - 10” x 80T $96.95

CMT219.090.12 - 12” x 96T $124.00

Circular Saw Blades

Application: for heavy-duty cuttings. Excellent on thin-walled, good non thick-walled extrusions.Machines: radial arm saws, miter saws, table and special saws.Material: aluminum, brass, copper, PVC and non-ferrous metals

225 - Series: Industrial Non-Ferrous Metal, PVC & Melamine

CMT225.060.08 - 8 1/2” x 60T $69.00

CMT225.080.10 - 10” x 80T $82.95

CMT225.096.12 - 12” x 96T $106.95

Application: for crosscuts on different kinds of materials.Machines: dry-cutter and miter saws without lubrication.Material: for ferrous materials and construction steel.Warning: not recommended for non-ferrous metals, wood, glass, concrete and plastic.

226 - Series: Industrial Sliding Compound Miter & Radial

CMT226.036.06 - 6 1/2” x 36T $48.99

CMT226.048.07 - 7 1/4” x 48T $69.95

CMT226.048.08 - 8 1/4” x 48T $67.00

CMT226.072.14 - 14” x 72T $130.95CMT226.080.12 - 12” x 80T $146.00

CMT226.060.10 - 10” x 60T $112.00

All CMT circular saw blades are made with the finest industrial materials and processes.

Dimensions: H:29" W: 30" L: 48" Weight (lbs.): 194 Cubic feet: 25.25

Dimensions: H:29" W: 30" L: 48" Weight (lbs.): 194 Cubic feet: 25.25

KNA2048

KNAAK CLASSIC®Storage Chest

$399.00• Closed Height 28• Open Height 49-1/4• One-Time Lock Installation• Built-In Tool Tray• Four-Way skids allow access from any Side making it easier and faster to transport

KNA4830 (KNY4830-D WITH DRAWER)

JOBMASTER®Storage Chest

• Closed Height 34-1/4• Open Height 61-1/4• Accessory Tray Model 31• New 3-Point Latch with WATCHMAN® IV Lock System• Additional reinforcement between the lock and the side housing

$598.00

Dimensions: H:23" W: 24" L: 48" Weight (lbs.): 145 Cubic feet: 16

or $849.00 With storage drawer!

The E-Z Ancor is a one-piece self-drilling anchor designed for optimal holding performance in gypsum wallboard. Available in zinc or high strength engineered plastic (non-conductive). Ideal anchor for 3/8", 1/2" and 5/8" gypsum wallboard.

E-Z Drywall Anchors

The original!!!! Fast and easy self-drilling anchors.

BUI6411E-Z Zinc w/ #8 x 1-1/4” Screws $26.50/per 100pk

BUI6400E-Z Zinc $22.95/per 100pk

BUI6401E-Z Toggle $29.98/per 50pk

BUI6400PE-Z Twist-n-Lock $24.00/per 100pk

BUI6411PE-Z Twist-n-Lock w/ #8 x 1-1/4” Screws $24.00/per 100pk

BUI6400ME-Z Mini $17.50/per 100pk

BUI6411PE-Z Mini w/ #6 x 1-1/4” Screws $21.95/per 100pk

BUI6400LE-Z Mini Twist-n-Lock $13.99/per 100pk

BUI6411PE-Z Mini Twist-n-Lock w/ #6 x 1-1/4” Screws $21.95/per 100pk

• Full range of anchors to cover all wall fastening applications.• Available in corrosion resistant, non-conductive white nylon.• Replaces plastic plugs and toggles.• Can be easily backed-out.• Low profile head.• Single point designs for clean cutting installation.• No hole preparation necessary; pre-drills own small precise hole in gypsum wallboard.• Deep thread design provides strong engagement in 3/8" 1/2" and 5/8" gypsum wallboard.• Installs quickly and easily with a Phillips screw-driver or square drive bit.

Advantages:

www.calfast.com

FOOTHILLS4550 - 72 Ave. SE

Phone: 403-279-7417Fax: 403-236-9612

Calgary

MAIN#1, 1288 - 42 Ave. SEPhone: 403-287-5340

Fax: 403-287-5382Calgary

NORTH2211 - 32 Ave. NE

Phone: 403-291-9177Fax: 403-250-3659

Calgary

Prices in effect August 1-31, or while quantities last!