CalcMaster Leaflet English

7/31/2019 CalcMaster Leaflet English

1/8

CalcMaster Injection molding software Makes the mold calculation very easy

SCHOUENBERG & PARTNERS CalcMaster Software Burg.Stolklaan 16, NL 4002 WJ Tiel The NetherlandsTel:+31-344-616161 Fax: +31-344-631014 Page 1 Email: [email protected] Internet: www.schouenberg.nl

The Standard CalcMaster softwarecalculates for you very fast the:

Mold prices + detailled moldhoursInjection molding dataMost economical quantity of cavitiesComplete costprice of the productAsking a quotation for a moldpriceMaking a quotation for a moldpricealso added on this CD-ROM

S 3D Product Viewer Software

The Optional CalcMaster part for themold and injection molding softwarecalculates for you very fast:

2 Components in 2 cavities2 Components in 1 cavityLeft and Right productStack moldsSofttools molds

S 1+1 Product in the mold

Mold price calculationDetailled moldhours

CalcMaster Injection molding software

Injection molding software for optimization and calculationof injection molded products

Makes the Project, Mold and Product calculation very easy Is the most comprehensive injection molding software for:

CalcMaster makes the mold calculation very easy

Injection molding dataCost price product


2/8



Mold prices + detailled moldhoursCalculation of the total Mold costs with the score system.Calculation of the total corrected / adjusted mold costpriceCalculation of the detailled mold drawing hoursCalculation of the complete detailled mold hoursExport all the mold data to the Automotive Exel sheet.

I Know Molding 3D software.After the input of a STL cad file we show you on your screen:

The product in 3D.Boths mold plates in 3D , including the partingline of the mold.After the export to the CalcMaster software we calculate automaticalythe complete moldprice .

Including:S Manufacturings hours of the cavities.S Manufacturings hours of the mold base.S Manufacturings hours for set up / sampling.S Numbers of hours for making the programming.S Numbers of hours for making the workpreparation.S Total number of toolmaker hours.S Number of mold design and drawing hours.S Costs of material and hardening.S Costs of mold base.S Costs of standard parts.S Total costs for hotrunner.S Costs for injection trials, follow-up, price at mould acceptance,

provisions for profit margins .

C a l c M a s t e r Injection molding software

Mold calculation is made very easy


3/8



CalcMaster Injection molding software .+

I-Know Moulding 3D Software.

Use the IKM softwarefor the automaticmould calculation

in theCalcMaster software


4/8



There is a direct connection between the Product cad STL file,3D Product view, 3D Mould plates view and the automaticaly total mould calculation


5/8



The CalcMaster software can simulate the injection moulding process , there is a direct connection between the

wall thickness of the product, the cooling time, the cycle time,the flowlengh / wall thickness ratio, the required injection pressure and the

clamping force of the injection moulding machine

C a l c M a s t e r

Injection molding data

Calculation of the Injection molding dataInjection time, Injection pressure, Clamping force requirement.Theoretical cooling time, Actual cooling time, Cycle time, Max.holding timeTotal detailed cycle time.Temperature profile over the product wall thickness during the cooling process.and many graphic screens of:

Injection pressure / injection timeCycle timeTemperature profile over the product wall thickness during the cooling process


6/8



I nj ect ion molding soft w areMakes the Project, Mold and Product

calculation very easy

Save youa lot of time

with the calculation of aninjection molding product

1 Moldprice2 Injectionmolding data

3 Economicalcavities

4 Costprice product

5 Sales information

12

3

4

5

With CalcMaster as a very r eliable sound board on t able

Produ ct Designer

Moldmaker

Molder

Management

Sales/ PurchasingProduct

New Proj ect

CalcMaster


7/8



CalcMaster Injection molding Software .

Our Philosophy is:

That you can intervene direct in theCalcMaster mold calculation by

saving in the background

once-only the many extra settings with your own experience .

Working with theCalcMaster Software

means:That you can use directly

your own experienceinto the complete

CalcMaster mold calculation

Not every company workson the same level.


8/8


SCHOUENBERG & PARTNERS V.O.F. Burg.Stolklaan 16, 4002 WJ Tiel The Netherlandstel:+31-344-616161 fax: +31-344-631014 e.mail: [email protected] www,schouenberg.nl

CalcMaster

Injection molding software for the plastic industrySoftware,Consulting and Training in the Mold- and Molding industry

With the CalcMaster software we start as a STARTING POINT with the:PRODUCT DESIGN .

after that we take into consideration the complete:

CONCEPTfrom out these two we starting with the complete:

COST MODELLINGof the total product

and then we can determine the: Mold prices + detailled mold hours.

Standard + Detailled hours for programming and workpreparartion Injection molding data.

Most economical quantity of cavities .Complete costprice of the product.

CalcMaster Software for optimalisation and modelling around an injection molded product .

CalcMaster is the most comprehensive injection molding softwareThe Standard Calcmaster calculates for you very fast:1- Moldprices, Standard + Detailled hours for programming and workpreparation1a- Detailled Moldhours2- Injection molding data ( injection molding simulation )3- Most economical quantity of cavities4- Complete costprice of the product5- Asking quotation for a moldprice6- Making a complete quotation from the moldprice

Simultaneous add on the CD-ROM:1- I-Know Molding 3D software (60 days testversion)2- 3D Product Viewer3- Autodesk Voloviewer from Autocad4- Hasco Catolog5- Cumsa Demo (parts injection molds) Optional CalcMaster part for the Mold and Injection molding calculationOnly to use in combination with the normal CalcMaster Injection molding software.This Optional part for the Mold and Injection molding software includes:1- 2 Components in 2 cavities.2- 2 Components in 1 cavity.3- Left and Right product.4- Stack molds5- Softtools molds6- 1+1 product in the mold.7- Combinations of mold constructions are possible (not every combinations is possible)The Professional version is the Standard + the Optional CalcMaster part

CalcMaster makes the Project, Mold and Product calculation very easy

Documents

CalcMaster Leaflet English