Compressed Air/Membrane Dryer & Hopper

CAHM series are compact, lightweight dryers that can easily fit on most machine throats, freeing up valuable floor space. The CAHM series operate on your plant’s compressed air and includes membrane for process air down to –49° F dew point.

Designed to mount on the process machine throat to dry materials with membrane/compressed air.

CAHM Series: Throughput Capacities up to *15 lb/hr (Up to 7 Kg/hr) * Based on PC pellets @ 38 lb/ft3

› Plus › No moving parts means trouble-free operation › 110 or 220 volts, 1 phase 60 or 50 cycle › Warranty: 5 years on control, 1 year on non-maintenance parts

Simple Operation Simply set the drying temperature.

Compact Balanced Design Usually does not require additional bracing.

-49°F Dew Point Drying Start with standard plant compressed air and our membrane will provide process air down to -49°F.

Compressed Air Requirements Use a steady supply of 100 psi clean, dehumidified compressed air @ .25 –2.0 SCFM.

ADC Controller Includes dew point monitor, high temperature alarm and shutdown, 7-day timer, alarm history and thermocouple alarms.

Wide Drying Temperature Range 70°F - 350°F (21°C -175°C) without the need for after-coolers.

Hopper Construction Stainless steel, insulated, blank feed throat adapter, drain port, slide gate and manual fill lid. (60 lb hoppers include laser-cut access door and full-length sight glass)

ADC Control

Baltimore, MD 21225 USA 410-789-4811 | Fax: 410-789-4638 | 1-800-BESTDRY (800-237-8379) | sales@novatec.com | www.novatec.com

© 2017 NOVATEC, Inc. All rights reserved All information in this bulletin is subject to change without notice.

Specifications:

Form # CAHM 21 AUG 2017

Options:Portable Conversion Kit:

›DAC-1 with 2” receiver ›Portable cart with casters ›Vacuum take-off box

20.25”

14”DIA.

6.00”

16.00”

28.25”

6.00”

16.00”

14.0 DIA.

39°

37.0”

SIGHT GLASS

6.00”

SLIDE GATE

6.00”

16.00”

136°

CONTROL FEATURESADC UDC

✔ O Dew point readout down to -49°F

✔ ✔Easy setting of process temperature

✔Blower rotation (phase) detection

✔Set Start/Stop times daily

✔

Monitoring of heater current to check heater and relay condition

✔

Automatic learn mode for heater currents at local voltage

✔ Date and time indication

✔ ✔Adjustable high temperature alarm

✔ Dew point alarm

✔ ✔Open thermocouple detection

✔ ✔Closed loop control of valve position

✔ ✔Actual fault indication – no codes to look up

✔ ✔Temperature calibration for ISO 9000

✔Optional Ethernet control

✔ Event log

✔ ✔5-Year replacement warranty

O Optional feature available