CADDY ALL-IN-ONE - ERICO · CADDY ALL-IN-ONE Electrical Assemblies We asked electrical contractors what problems they face and how CADDY innovation can help meet their needs

We Asked. We Listened. We Innovated.

CADDY ALL-IN-ONEELECTRICAL ASSEMBLIES

ANOTHER ROAD TO CADDY INNOVATION

CADDY ALL-IN-ONE Electrical Assemblies

We asked electrical contractors what problems they face and how CADDY innovation can help meet their needs. We listened to what they do today and heard a consistent message: Find a better way to mount, wire and install electrical devices, such as switches and outlets, on the job or offsite. Then the CADDY team designed and built ONE system that meets many of the different installation methods and preferences of today’s electrical contractor.

Stud-Mounted Assemblies

Between-Stud Assemblies

Floor-Mounted Assemblies

2

www.erico.pentair.com

CADDY ALL-IN-ONE electrical assemblies combine the electrical box, support bracket, mud ring, far-side support and ground wire pigtail into a single solution that is ready to use right out of the box. The system provides the contractor with the flexibility to wire from the front or the back of the assembly. The open-back design allows for easier access when installing conduit connectors or multiple circuits. Models are available with integrated, removable or without mud rings and, unlike many other solutions, the unit stays fixed in place when the mud ring is removed. The CADDY ALL-IN-ONE system includes stud-mounted, between-stud and floor-mounted solutions.

This unique system offers electrical contractors fewer components, better access for wiring, and may be purchased as standard inventory from stocking CADDY distributors.

Stud

-Mou

nted

Ass

embl

ies

Betw

een-

Stud

Ass

embl

ies

Floo

r-M

ount

ed A

ssem

blie

s

CADDY ALL-IN-ONE Electrical Assemblies

Features

Complete assembly that is ready to use right out of the box and installs with just two screws

Open-back design offers faster and easier access to install conduit connectors or wiring

Box remains fixed in place when mud ring is removed (on applicable models)

Rigid back plate functions as a far-side support and is resistant to bending

Stocked inventory – available when you need it

Made in the USA

3


4

Another Road to CADDY Innovation

CADDY ALL-IN-ONE Stud-Mounted With Integral Mud Ring

CADDY ALL-IN-ONE Stud-Mounted With Removable Mud Ring

CADDY ALL-IN-ONE Stud-Mounted Without

Mud Ring

CADDY ALL-IN-ONE Stud-Mounted Assemblies

Stud-Mounted A

ssemblies

CADDY ALL-IN-ONE stud-mounted electrical assemblies are a fast and easy way to mount, wire and install outlet and switch assemblies to metal studs with just two screws. Part of the innovative CADDY ALL-IN-ONE product family, this solution combines the electrical box, support bracket, mud ring, far-side support and ground wire pigtail into ONE unit. The open-back design provides greater access to the box interior, making the installation of conduit connectors and wiring for multiple circuits faster and easier. CADDY ALL-IN-ONE stud-mounted electrical assemblies are available in single- or double-gang and with a number of mud-ring configurations that meet the needs of most stud-mounted applications.

Features

• Complete assembly that is ready to use right out of the box and installs with just two screws

• Open-back design offers faster and easier access to install conduit connectors or wiring

• Mounts to either side of the stud

• Repositions to other stud side without redoing knockouts or rotating devices

• Versatile back plate functions as rigid far-side support or additional stud attachment

• Assembly mounts tight to stud, making it easier to pull and install wiring

• Available in single- or double-gang

• Available with integral mud ring, removable mud ring or without mud ring

• Made in the USA


4

CADDY ALL-IN-ONE Stud-Mounted With Integral Mud Ring

Features

• Ingenious design combines box, support bracket and mud ring into a single, integrated unit

• Fewer parts makes the installation faster and easier

• Center marks provide easy height positioning

• Includes multiple 1/2” and 3/4” knockouts on each side of the box

• Made in the USA

A

B

A

B

C

Specifications Material: Steel Finish: Pre-galvanized

Ground wire pigtail is 8”.

Part Number Gang Ground WireIncluded

Drywall Thickness A B C

A1SA1N 1 No 5/8” 5 3/4” 5 1/8” 3 5/8”

A1SA1G 1 Yes 5/8” 5 3/4” 5 1/8” 3 5/8”

A1SA2N 2 No 5/8” 5 3/4” 5 1/8” 3 5/8”

A1SA2G 2 Yes 5/8” 5 3/4” 5 1/8” 3 5/8”St

ud-M

ount

ed A

ssem

blie

s

5

6” stud depth,use with TEB6XT

3 5/8” stud depth 4” stud depth

Back plate provides far-side support for multiple stud depths.




CADDY ALL-IN-ONE Stud-Mounted With Removable Mud Ring

Features

• Removable mud ring provides front access to the interior of the box

• Box remains fixed in place when mud ring is removed


• Assemblies keyed for precise alignment when installed on both sides of a stud

• Made in the USA

A

B

A

B

C



Part Number Gang Ground WireIncluded

Drywall Thickness A B C

A1SF1G 1 Yes 5/8” 5 3/4” 5 1/8” 3 5/8”

A1SF3G 1 Yes 1 1/4” 5 3/4” 5 1/8” 3 5/8”

A1SF2G 2 Yes 5/8” 5 3/4” 5 1/8” 3 5/8”

A1SF4G 2 Yes 1 1/4” 5 3/4” 5 1/8” 3 5/8”

Stud-Mounted A

ssemblies

6


CADDY ALL-IN-ONE Stud-Mounted Without Mud Ring

Features

• Provides the flexibility to add a mud ring for non-standard drywall thicknesses



• Assemblies keyed for precise alignment when installed on both sides of a stud

• Works with standard US and Canadian mud rings

• Made in the USA

A

B

C



Part Number Ground Wire Included A B C

A1SF0N No 5 3/4” 5 1/8” 3 5/8”

A1SF0G Yes 5 3/4” 5 1/8” 3 5/8”St

ud-M

ount

ed A

ssem

blie

s

7




CADDY ALL-IN-ONE Between-Stud With Integral Mud Ring

CADDY ALL-IN-ONE Between-Stud With

Removable Mud Ring

CADDY ALL-IN-ONE Between-Stud Without

Mud Ring

CADDY ALL-IN-ONE Between-Stud Assemblies

Between-Stud A

ssemblies

CADDY ALL-IN-ONE between-stud electrical assemblies are a fast and easy way to mount, wire and install outlet and switch assemblies between metal studs with just two screws. Part of the innovative CADDY ALL-IN-ONE product family, this solution combines the electrical box, telescoping support bracket, mud ring, far-side support and ground wire pigtail into ONE unit. The open-back design provides greater access to the box interior, making the installation of conduit connectors and wiring for multiple circuits faster and easier. CADDY ALL-IN-ONE between-stud electrical assemblies are available in single- or double-gang and with a number of mud-ring configurations that meet the needs of most between-stud applications.

Features


• Box moves side-to-side for exact positioning


• Telescoping bracket accommodates up to three boxes

• Rigid back plate functions as a far-side support and is resistant to bending



• Made in the USA

8

Another Road to CADDYInnovation


8

CADDY ALL-IN-ONE Between-Stud With Integral Mud Ring

Features



• Includes two screws to lock box in position

• Pre-bent tabs on support bracket help to quickly square assembly to stud



• Made in the USA

AB

C

Specifications Material: Steel Finish: Pre-galvanized Ground Wire Included: Yes


24” stud spacing requires use of three mounting screws. Use only with CADDY ALL-IN-ONE box assemblies.

Part Number Gang Drywall Thickness Stud Spacing A B C

A1BA1G 1 5/8” 16” – 24” 5 3/8” 4 1/8” 3 5/8”

A1BA2G 2 5/8” 16” – 24” 5 3/8” 4 1/8” 3 5/8”

Betw

een-

Stud

Ass

embl

ies

9

Telescoping bracket accommodates up to three boxes


CADDY ALL-IN-ONE Between-Stud With Removable Mud Ring

Features







• Made in the USA

AB

C




Part Number Gang Drywall Thickness Stud Spacing A B C

A1BF1G 1 5/8” 16” – 24” 5 3/8” 4 1/8” 3 5/8”

A1BF3G 1 1 1/4” 16” – 24” 5 3/8” 4 1/8” 3 5/8”

A1BF2G 2 5/8” 16” – 24” 5 3/8” 4 1/8” 3 5/8”

A1BF4G 2 1 1/4” 16” – 24” 5 3/8” 4 1/8” 3 5/8”

Between-Stud A

ssemblies

10



CADDY ALL-IN-ONE Between-Stud Without Mud Ring

Features








• Made in the USA

A B

C




Part Number Stud Spacing A B C

A1BF0G 16” – 24” 5 3/8” 4 1/8” 3 5/8”

Betw

een-

Stud

Ass

embl

ies

11



12

Another Road to CADDYInnovation

CADDY ALL-IN-ONE floor-mounted electrical assemblies are a fast and easy way to mount, wire and install outlet and switch assemblies to stud wall floor track with just two screws. Part of the innovative CADDY ALL-IN-ONE product family, this solution combines the electrical box, support bracket, mud ring, far-side support, integrated first means of support and ground wire pigtail into ONE unit. The open-back design provides greater access to the box interior, making the installation of conduit connectors and wiring for multiple circuits faster and easier. CADDY ALL-IN-ONE floor-mounted electrical assemblies are available in single- or double-gang and with a number of mud-ring configurations that meet the needs of most floor-mounted applications.

CADDY ALL-IN-ONE Floor-Mounted With Integral Mud Ring

CADDY ALL-IN-ONE Floor-Mounted With Removable Mud Ring

CADDY ALL-IN-ONE Floor-Mounted Without

Mud Ring

CADDY ALL-IN-ONE Floor-Mounted Assemblies

Floor-Mounted A

ssemblies

Features



• Provides versatile positioning - independent of wall stud location

• Mounts inside (use mounting tabs) or under floor track

• Integrated first means of support accepts conduit or MC/AC cable

• Rigid back plate functions as a far-side support and is resistant to bending

• Finder tab helps locate electrical box behind drywall



• Made in the USA


12

CADDY ALL-IN-ONE Floor-Mounted With Integral Mud Ring

Features



• Preset to a finish height of 18” from the floor (adjustable 12” or 15”)


• Accommodates additional CADDY ALL-IN-ONE box assemblies, support brackets and low-voltage mounting plates


• Made in the USA

B

A

B

A

D

C

Specifications Material: Steel Finish: Pre-galvanized Ground Wire Included: Yes EMT Conduit Size: 1/2”, 3/4” MC/AC Cable Size: 14-2, 14-3, 14-4, 12-2, 12-3


Part Number Gang Drywall Thickness A B C D

A1FA1G 1 5/8” 22 3/16” 7 3/4” 3 5/8” 2 11/16”

A1FA2G 2 5/8” 22 3/16” 7 3/4” 3 5/8” 2 11/16”

Floo

r-M

ount

ed A

ssem

blie

s

13

Add CADDY low-voltage mounting plates for new construction.

MP1S & MP2S

Add electrical boxes laterally with CADDY universal electrical box brackets.

TEB23 & TEB4

Add support between studs with the CADDY electrical box mounting strap.

TEBS1624

Use with other CADDY products for additional mounting and

support needs.


CADDY ALL-IN-ONE Floor-Mounted With Removable Mud Ring

Features







• Made in the USA

B

A

B

A

D

C




A1FF1G 1 5/8” 22 3/16” 7 3/4” 3 5/8” 2 11/16”

A1FF3G 1 1 1/4” 22 3/16” 7 3/4” 3 5/8” 2 11/16”

A1FF2G 2 5/8” 22 3/16” 7 3/4” 3 5/8” 2 11/16”

A1FF4G 2 1 1/4” 22 3/16” 7 3/4” 3 5/8” 2 11/16”

Floor-Mounted A

ssemblies

14


MP1S & MP2S


TEB23 & TEB4


TEBS1624


support needs.


CADDY ALL-IN-ONE Floor-Mounted Without Mud Ring

Features








• Made in the USA

B

A

C

D



Part Number A B C D

A1FF0G 22 3/16” 7 3/4” 3 5/8” 2 11/16”


A1FF1G 1 5/8” 22 3/16” 7 3/4” 3 5/8” 2 11/16”

A1FF3G 1 1 1/4” 22 3/16” 7 3/4” 3 5/8” 2 11/16”

A1FF2G 2 5/8” 22 3/16” 7 3/4” 3 5/8” 2 11/16”

A1FF4G 2 1 1/4” 22 3/16” 7 3/4” 3 5/8” 2 11/16”

Floo

r-M

ount

ed A

ssem

blie

s

15


MP1S & MP2S


TEB23 & TEB4


TEBS1624


support needs.


F1111B-NAEN DF956LT12NAEN 50M0912

©2012, 2015 Pentair All Rights ReservedCADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

AUSTRALIAPhone 1-800-263-508Fax 1-800-423-091

NORWAYPhone 800-100-73Fax 800-100-66

HUNGARYPhone 06-800-16538Fax +39-0244-386-107

CHINAPhone +86-21-3430-4878 Fax +86-21-5831-8177

SWITZERLANDPhone 0800-55-86-97Fax 0800-55-96-15

BELGIUMPhone 0800-757-48Fax 0800-757-60

POLANDPhone +48-71-349-04-60Fax +48-71-349-04-61

INDONESIAPhone +62-21-575-0941Fax +62-21-575-0942

DENMARKPhone 808-89-372Fax 808-89-373

THAILANDPhone +66-2-267-5776Fax +66-2-636-6988

BRAZILPhone +55-11-3623-4333Fax +55-11-3621-4066

SINGAPOREPhone +65-6-268-3433Fax +65-6-268-1389

ITALYPhone 800-870-938Fax 800-873-935

FRANCEPhone 0-800-901-793Fax 0-800-902-024

UNITED ARAB EMIRATESPhone +971-4-881-7250Fax +971-4-881-7270

CANADAPhone +1-800-677-9089Fax +1-800-677-8131

SPAINPhone 900-993-154Fax 900-807-333

MEXICOPhone +52-55-5260-5991Fax +52-55-5260-3310

GERMANYPhone 0-800-189-0272Fax 0-800-189-0274

UNITED KINGDOMPhone 0808-2344-670Fax 0808-2344-676

CHILEPhone +56-2-370-2908Fax +56-2-369-5657

SWEDENPhone 020-790-908Fax 020-798-964

NETHERLANDSPhone 0800-0200-135Fax 0800-0200-136

HONG KONGPhone +852-2764-8808Fax +852-2764-4486

UNITED STATESPhone 1-800-753-9221Fax +1-440-248-0723

WARNING Pentair products shall be installed and used only as indicated in Pentair’s product instruction sheets and training materials. Instruction sheets are available at www.erico.pentair.com and from your Pentair customer service representative. Improper installation, misuse, misapplication or other failure to completely follow Pentair’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and/or death, and void your warranty.

cULus is a registered certification mark of UL LLC.


Documents

CADDY ALL-IN-ONE - ERICO · CADDY ALL-IN-ONE Electrical Assemblies We asked electrical contractors what problems they face and how CADDY innovation can help meet their needs