cablemanagementsystems

Call us at (84.8) 3897 8933 or email us at [email protected]

ISO 9001:2008

SOUTHERN TRADING & PRODUCING ELECTRICAL EQUIPMENT COMPANY

mailto:[email protected]

SOUTHERN ELECTRICAL EQUIPMENT COMPANY

GREEN TECHNOLOGY FOR TODAY AND TOMORROW

CABLE MANAGEMENT SYSTEMS

General

FRP COMPOSITES / PRODUCTS FC – 01 01/14

Fiberglass cable management systems are used in highly corrosive environments, especially in the harsh environment of the offshore oil and gas industry. Applications in high electromagnetic fields are possible. The material is transparent to electromagnetic waves. Fiberglass cable management systems give you the load capacity of steel, plus the inherent characteristics afforded by the pultrusion technology: non-conductive, non-magnetic and corrosion resistant. Although light in weight, the strength to weight ratio surpasses that of equivalent steel products. Fiberglass cable management systems will not rust, nor does it ever require painting. They are available in both polyester and vinyl ester resin systems, manufactured to meet ASTM E-84, Class 1 Flame Rating and self-extinguishing requirements of ASTM D-635. A surface veil is applied during the pultrusion process to ensure a resin-rich surface for superior corrosion resistance as well as an ultraviolet exposure barrier. Fiberglass cable management systems come in gray or blue (polyester resin) and beige (vinyl ester resin). Custom colors are available on request. There are three systems available, Cable Trays & Cable Channels for general-purpose applications and Cable Ladders suited for larger heavier duty commercial projects. Various fittings & accessories such as splice plates, bends etc. are available in kit from EMN Composites.


General


Fiberglass Cable Ladders

Fiberglass Cable Trays

Fiberglass Cable Channels

Fiberglass Cable Ladders E-Series

C-Series


Recommended Support Locations


Splice Location for Straight Sections

Support Location for Fittings

Splice Plates is recommended to be located at ¼ of the span from the support, where the bending moment is zero.

Horizontal Fitting Supports

Vertical Fitting Supports

Horizontal Cross Supports

Reducer Fitting Supports

Vertical Tee Supports

Horizontal Tee Supports


Cable Ladder Systems


Specifications Cable ladder systems are made of straight sections, fittings and accessories.

Straight section structural elements: side rails, rungs and splice plates.

Side rails: FRP pultruded “C” configuration (Series C) or “E” configuration (Series E)

Side rails are predrilled to accept splice plates.

Rungs: square hollow tube 25x25mm (Series C) or strut channel 40x25 mm (Series E)

Cable ladder must have integral connection between side rails and rungs consisting of

non-metallic mechanical fasteners and adhesive bonding.

Standard straight section length: 3,000 mm, 6,000 mm.

Standard side rail height: 75 mm, 100 mm, 150 mm.

Standard cable ladder width (inside width): 150; 225; 300; 450; 600; 750; 900 mm.

Standard rung spacing: 150; 225; 300; 450 mm.

Straight section structural elements are pultruded from glass fiber reinforced polyester or vinyl ester resin. Minimum glass content 55 to 60% in all pultruded shapes. They are constructed with a surface veil to insure a resin-rich surface and ultraviolet resin. Pultruded shapes are manufactured to meet ASTM E-84, Class 1 flame rating and self-extinguishing requirements of ASTM D-635. All FRP fittings & accessories are pre-fabricated and will be same specification as of straight sections.


Cable Ladders E-Series


Catalog Number Width (mm) Height (mm) kG/m

FRP CABLE LDR E 100 - 300 300 100 2.92

FRP CABLE LDR E 100 - 450 450 100 3.21

FRP CABLE LDR E 100 - 600 600 100 3.50

FRP CABLE LDR E 100 - 750 750 100 3.80

FRP CABLE LDR E 150 - 300 300 150 3.62

FRP CABLE LDR E 150 - 450 450 150 3.91

FRP CABLE LDR E 150 - 600 600 150 4.20

FRP CABLE LDR E 150 - 750 750 150 4.50

Standard length of cable ladders: 3,000 mm

Standard rung spacing: 150 mm / 300 mm

Drawing of “E” Side Rail 100x30

The ladder rung is slotted along the length and fitted into the receiving section of the cable ladder where a lip on the base of the ladder side rail gives a positive grip on the rung. Each rung is bolted at each end to the cable ladder side rail to ensure that there is a permanent and secure connection that does not rely on the expansion of plastic fittings for stability.

Rungs: Strut Channel 40x25


Fittings Cable Ladders E-Series


Fittings

Horizontal Bend Horizontal Tee

Horizontal Cross Vertical Bend Vertical Tee

Reducer Splice Plate

Horizontal Tee

45º Horizontal Bend


45º Vertical Outside Bend

45º Vertical Inside Bend


90º Vertical Outside Bend


Fittings Cable Ladders E-Series


Horizontal Cross

Straight Reducer

Left Hand Reducer

Right Hand Reducer

Cable Ladder Height (mm)

A (mm)

B (mm)

C (mm)

100 90 11.5 67

150 140 11.5 117

Splice Plate

Fixed Splice Plate

Expansion Splice Plate

Horizontal Angle Splice Plate


Cable Ladders E-Series Fittings


Adjustable Horizontal Splice Plate

Expansion Adjustable Horizontal

Splice Plate

Vertical Angle Splice Plate

Adjustable Vertical Splice Plate

Expansion Adjustable Vertical

Splice Plate


Cable Ladders C-Series


Catalog Number Side Rail

Height (mm)

Loading Depth (mm)

Flange Width (mm)

Min. Thickness

(mm)

FRP CABLE LDR C 75 - 5 75 45 25 5.0

FRP CABLE LDR C 100 - 5 100 70 30 5.0

FRP CABLE LDR C 100 - 6 100 68 30 6.4

FRP CABLE LDR C 150 - 5 150 120 40 5.0

FRP CABLE LDR C 150 - 6 150 118 40 6.4

FRP CABLE LDR C 150 - 8 150 117 40 8.0

Standard length of cable ladders: 3,000 / 6,000 mm

Standard width of cable ladders : 150 / 225 / 300 / 450 / 600 / 750 / 900 mm

Standard rung spacing: 150 / 225 / 300 / 450 mm

Drawing of “C” Side Rail

Side Rails: inward “C” configuration & predrilled to accept splice plates

Rungs: square hollow tube 25x25 mm

All rung to side member connections shall have both a mechanical and a

chemical (adhesive) lock.

The ladder shall be assembled by the use of a locking pin made of

fiberglass reinforced thermoplastic. The locking pin shall be inserted

under pressure with a high strength, chemical resistant adhesive.


Accessories Cable Ladders C-Series


Flat Cover

Divider Strip

Vertical Fixing Clamp

Blind End Plate

Hold Down Clip


Cable Trays


Drawing of Cable Tray 300x80 & Cable Tray Lid 300

Cable Trays incorporate a unique “click fit” cover that grips the tray and holds in place in all the heaviest weather without the need for additional clips or mechanical fastening but is still sufficiently flexible to be able to be removed and refitted without loss of the “click fit” functionality. This important feature significantly speeds installation, keeping installation costs down and avoids the possibly of mechanical clips being lost of dropping into process equipment or product.

The standard sizes: Lengths: 3,000 mm Widths: 100/ 150/ 200/ 300 mm Heights: 50/ 80 mm

FRP CABLE TRAY 300-80


Cable Trays


Fittings

Horizontal Bend Horizontal Tee


Reducer

Splice Plate



Catalog Number Width (mm) Height (mm) kG/m

FRP CABLE TRAY 50 - 100 100 50 1.34

FRP CABLE TRAY 50 - 150 150 50 1.67

FRP CABLE TRAY 50 - 200 200 50 1.96

FRP CABLE TRAY 50 - 300 300 50 2.55

FRP CABLE TRAY 80 - 100 100 80 1.73

FRP CABLE TRAY 80 - 150 150 80 2.02

FRP CABLE TRAY 80 - 200 200 80 2.31

FRP CABLE TRAY 80 - 300 300 80 2.90


Reducer

Cable Tray Lid


Cable Channels


Perforated Cable Channel

Non-Perforated Cable Channel

Catalog Number Width (mm)

Height (mm)

FRP CABLE CHANNEL 50 - 25 50 25





FRP CABLE CHANNEL 50 - 25 P 50 25





Standard Length of Cable Channel: 3,000 / 6,000 mm

* P – Perforated Type

Other sizes of W & H available on request

Fittings Horizontal Bend Horizontal Tee


Reducer Splice Plate


Applications


Applications

Chemical Plants

Power Plants Effluent Treatment Plants

Offshore/ Onshore Platform Food & Drug Industries

Marine Industries Refineries and many more

SOUTHERN ELECTRICAL EQUIPMENT COMPANY

40 - Street 11 - TruongTho Ward - ThuDuc District - HoChiMinh City – Vietnam

(84.8) 3897 8933

[email protected]

www.emn.com.vn

www.emncomposite.com.vn

ISO 9001:2008

mailto:[email protected]

Documents

cablemanagementsystems