Cable Transits & Penetration Seals - STI Marine Firestop · Cable Transits & Penetration Seals for Fire-Rated Divisions FIRE WATER SMOKE

Cable Transits & Penetration Sealsfor Fire-Rated Divisions

FIRE WATER SMOKE

Ensure Life Safety At SeaSpecified Technologies Inc. (STI) was founded over 25 years ago and has quickly become the industry leader in passive fire protection by providing premium quality, high performance and technologically advanced fire safety products and solutions that help save lives and protect property. Our complete line of products preserve and protect the integrity of vessels and platforms and are tested and manufactured under the strictest quality control standards to withstand the forces of nature, the threat of fire, and the test of time.

ApprovalsSTI Marine Firestop Products are approved by major classification societies, including American Bureau of Shipping (ABS), US Coast Guard (USCG), Bureau Veritas (BV), and MED B & D certification. Other approvals may be applied for on an as-needed basis. Contact STI for additional information on approvals.

Cable Applications

Contents

Pipe Applications

Other Applications

Cable and Pipe Applications

MDM

MFC

M-PACT

MFS

MWS

MPU

MFC-W

MFC-T

MSS

4

14

101213

8

16

9

17

Fire-Rated Cable Transits

SplitFirestop Collars

Pipe & CableSystem

Firestop Sealant

Wrap Strip

Firestop Putty

Water-TightFirestop Collars

TransitionalFirestop Collars

Snap-Seal Cable Plugs

MRF19 RTV Firestop Foam

MCC18 Cable Coating

54

Build Faster. Improve Quality.Save Time & Money• Maximize project savings by avoiding days of designing, planning and scheduling

individual cable installations in each transit

• Realize significant material and labor cost savings by eliminating downstream operations

• Simplify cable retrofits without the need to remove or re-seal packing materials

Drastically Reduce Total Install TimeThese self-contained devices offer the best-installed cost by allowing you to pick up

valuable production hours by eliminating the need to pack transit frames. You avoid

complicated sealing operations after installation and gain the flexibility of simple

cable expansions on demand.

Improve Efficiency• Minimize installation time by using this revolutionary one-piece design, ready to

install right out of the box

• Simplify logistics with less individual components to manage, order, track,

inventory, and deliver to each transit location

• Promote simple remote cable pulls without having to remove, replace, or adjust

existing materials

• Virtually eliminate cable pull errors or additions after sealing and simplify

expansions and upgrades while at sea or in dry dock

Self-Sealing | Self-Adjusting | Self-Contained

Always Compliant

6 7

MDM150 Specifically Designed For Cruise Line Ships

The Fastest & Easiest Way to Pull CablesEZ-Path® Marine Cable Transits can be installed individually or ganged together to accommodate future expansions or increased cable load capacity. The heavy-duty mounting plates can be welded or even bolted to the fire-rated division for fast and convenient installs at sea or in dry dock.

Easy Cable RetrofitsThe 400 Series allows you

to adapt the device around

existing cabling conditions.

1. Surround cables with device

2. Secure plates around device

3. Weld device to bulkhead or deck

Easy Installation1. Cut hole in the division

2. Spot weld device

3. Pull Cables

Easy As 1 - 2 - 3

Speed Up The Production ProcessEZ-Path® Marine Cable Transits are the industry’s only

zero-maintenance transit device designed to take control of your fire-rated divisions in non-water-tight applications without the need to mechanically seal openings.

MDM


1.

1.

2.

2.

3.

3.

With only a 75mm (3”) projection it is perfect for tight spaces.

Additional insulation may be required in some designs. Consult Type Approval and installation details for more information.

PaintableSmokeBarrier

FinishedProduct

Re-EnterableNoise

Reduction

IntumescentNo Expiration

Cables

Features & Benefits: Applications:

Available solutions for hard core joiner panels

How It WorksSelf-Sealing Intumescent Pads- Provide 100% Sealed Fire & Smoke Protection- Automatically Adjust to Cable Loads - Gently Conforms Around Cable Irregularities

Heavy Duty Steel Housing- Protected with Marine-Grade Powder Coating

50 KSI ABS Grade Steel Mounting Plate- Easily Welds to Divisions

For Non-Watertight Divisions & Fully Compliant with New IMO FTP6 Criteria.

• 100% compliant 100% of the time• Maintenance free• No activation of the fire sealing system required• Fully assembled out of the box• Greater performance reliability• No putty or sealant required

• Accessories adapt the cable transits to ganged configurations, thicker walls, retrofit with previously installed cables

To View Our Marine Cable Transit Video

Scan HereTested to IMO FTP Code 2010, Part 3- Class A-0 to A-60- Class H-0 to H-120 (400 series)*Consult Factory for Most Current Testing & Approvals

98

MPU MSS

To View Our STI Marine Firestop Putty® Video

Scan Here

Marine Firestop Putty is designed to seal small to medium size cable openings in fire-rated divisions.Marine Firestop Putty is a non-hardening, moldable compound that can be hand-packed into openings for permanent or temporary sealing allowing for cable removal or addition.

Firestop Putty

• Flexible to accommodate vibration• Resistant to aging and weathering• Easily repairable, retrofittable, and

installable• Remains moldable/pliable

• Can be used to form flexible, vibration-resistant seals around cables in bulkheads and decks


Firestop Putty coils are available in convenient 15.9 L Pail (3.5 Gallon)

This two-piece device snaps together for easy installation and is ideally suited for single cable penetrations through joiner panels and other types of divisions.MSS was specifically designed for use with surveillance cameras and provides a split design that can be used with new or previously installed cables.

Snap-Seal Cable Plugs

• Provides rapid intumescent expansion• Snaps onto cables, plastic and

metallic tubing

• Ideal for one or more cables or plastic and metallic tubing with a total O.D. 14mm

• Use on data, alarm, security, CCTV or electrical cables


Low VOC

Flexible

WaterResistant

SmokeBarrier

Lightweight

Re-Enterable

NoiseReduction

No Expiration Paintable

FlexibleSmokeBarrier

FinishedProduct

LightweightNoise

Reduction

IntumescentNo Expiration

CablesCables

Tested to IMO FTP Code 2010, Part 3- Class A-0 to A-60- Class H-0 to H-60 (Decks)*Consult Factory for Most Current Testing & Approvals

Tested to IMO FTP Code 2010, Part 3- Class A-0 to A-60- Class H-0 to H-120 (Bulkheads)*Consult Factory for Most Current Testing & Approvals

1110

• Provides Water and Gas-Tight Ratings

• Conforms to Virtually Any Condition

• Can be Modified to Allow for Retrofit

To View Our M-PACT Installation Video

Scan Here

The Fastest & Most FlexibleFire And Water-Tight Sealing SystemFor Fire-Rated Bulkheads And Decks

Combine with STI Marine Wrap Strip to seal complex openings with plastic pipes

Easy Installation1. Pack opening with filler material

2. Apply sealant

3. Smooth sealant surface with trowl

As Simple As 1-2-3

1. 2. 3.

Impact Your Bottom Line

• Cut to Length Filler Dispenser Rolls - Packs Easily Between Penetrants

- Ideal Adhesion for Large or Overhead Applications

- Supple, Non Friable Material with No Asbestos

• Cutting Edge Hybrid Polymer Patented Technology - Better Water Resistance than Conventional Silicone Sealants

- Safety First Non-Halogenated Formula

M-Pact™ represents the fastest solution for sealing fire-rated cable and pipe penetrations in both watertight and non watertight divisions. It combines pliable non-combustible filler blanket with advanced watertight MFS sealant.

Low VOC Permanent

Paintable BlankOpeningFlexible

SmokeBarrier

Lightweight

Re-Enterable Autobonding

NoiseReduction

Plastic Pipes MetallicPipes

Cables


MultiplePenetrations

• Quick and Easy to Install

• Safe and Simple to Clean Up

• Meets IMO FTP Code

Water-Tight

Additional insulation may be required in some designs. Consult Type Approval and installation details for more information.

Tested to IMO FTP Code 2010, Part 3- Class A-0 to A-60*Consult Factory for Most Current Testing & Approvals

M-PACT

M A R I N E P I P E A N D C A B L E T R A N S I T

T M

1312

This intumescent wrap strip comes in convenient cut-to-length rolls providing an economical solution for firestopping combustible penetrants.MWS offers a flexible, high-performance option to seal bulkheads and decks by forming an effective barrier against fire, smoke, and hot gasses.

Wrap Strip

MWSMFS

To View Our Marine Firestop Sealant Installation Video

Scan Here

• Provides rapid intumescent expansion• Forms flexible, water-resistant seals

• Ideal for nonmetallic pipes or pipe insulation

• Can be used in tandem with Marine Firestop Sealant or as a tuck in.


This advanced hybrid polymer sealant cures in the presence of atmospheric moisture and is designed for fire-rated divisions.MFS offers better water resistance than conventional silicone sealants and forms a tight, durable elastomeric seal, preventing the transmission of air, smoke and gasses.

Firestop Sealant

• Maintenance-free and simple to install

• Forms flexible, vibration-resistant seals

• Resistant to aging and weathering• Non-corrosive, non-conductive

• Ideal for applications where a high degree of water-resistance is required.

• For interior or exterior applications in watertight decks and bulkheads


Flexible

WaterResistant

SmokeBarrier

Lightweight

NoiseReduction

Paintable

Intumescent Plastic Pipes

No Expiration

Low VOC Permanent

Paintable

Duct BlankOpeningFlexible

SmokeBarrier

Lightweight

Re-Enterable Autobonding

NoiseReduction

Plastic Pipes


MetallicPipes

Cables

Water-Tight

Tested to IMO FTP Code 2010, Part 3- Class A-0 to A-60- Class H-0 to H-120 (Bulkheads)- Class H-0 to H-60 (Decks)*Consult Factory for Most Current Testing & Approvals


1514

Tested and approved for use with USCG Approved SeaCor® and SeaDrain

Plus® piping as well as other non-metallic and metallic pipes.

SeaCor® and SeaDrain Plus® are registered trademarks of Georg Fischer

Split Firestop Collars are factory-manufactured devices designed for use in fire-rated divisions to protect plastic and metallic pipes.These firestop collars feature a stainless steel shell lined with a molded, intumescent insert that expands with heat more than 60 times to contain the fire to the point of origin, restricting the passage of fire, smoke and hot gases. They are designed for quick and easy attachment to the bulkhead or deck.

MFC

Split Firestop Collars

Combine with STI Marine Firestop Putty to seal multiple pipe penetrations.

Hard core joiner panel solutions are available with the use of our MFC firestop collars.

GRE/GRP Large Diameter Firestop Collars available in sizes ranging from 300 to 700 mm

MFC50 - MFC324

MFC16 - MFC40

60mm(2.36 in)

2mm(0.1 in)

CollarDepth

3mm(0.12 in)

Cat. No. Collar Depth

MFC50MFC60MFC63MFC75MFC90

MFC110MFC115

55 mm (2.15 in)

MFC125MFC140MFC160MFC169

105 mm (4.12 in)

MFC200MFC219MFC225MFC273MFC324

131 mm (5.15 in)

Dimensions - Collar Depth

To View Our STI Marine Firestop Collar Video (50mm & Above)

Scan HereTo View Our STI Marine Firestop Collar Video (40mm & Below)

Scan Here

• Heavy gauge, chromium rich 316 stainless steel construction.

• Resistant to aging and weathering, no soluble or hygroscopic ingredients.

• Designed for high volume of char and rapid expansion.

• Retrofits around existing metallic and non-metallic pipes.

• Available in many common sizes and won’t damage outside of pipes.

• Sized to fit common pipe sizes.• Applications were tested for

common pipes including PVC, PVDF, CPVC, Pb, PE, PE-AL-PE, ABS, GRE, GRP, FRP, uPVC, Copper and Steel.


VSSTI

Help Prevent Future Failures

When pipe vibration occurs, the robust intumescent liner protects pipes from potential damage while other solutions with sharp metal edges make direct contact.

Unlike other devices, STI Marine Collars are engineered so pads firmly grip the pipe until properly attached and don’t slide down in overhead conditions.

OthersCompetitive collars have sharp edges that typically scratch and damage plastic pipes due to excessive vibration. Over time, these conditions can cause excessive pipe damage and potential failures.

Flexible

WaterResistant

SmokeBarrier

FinishedProduct

Lightweight

NoiseReduction

Paintable

Paintable

Intumescent

No Expiration

Plastic Pipes MetallicPipes

Tested to IMO FTP Code 2010, Part 3- Class A-0 to A-60- Class H-0 to H-60- Class H-0 to H-120*Consult Factory for Most Current Testing & Approvals

Collar Created Pipe Damage

Thicker Intumescent Foam Pads

1716

• Offers protection of connections between steel pipes or scuppers to plastic pipes in non-pressurized systems.

• Applications were tested for common plastic and steel pipes or scuppers.• Easily retrofitable around existing, mated pipes.• No pre-planning or staging necessary with split closure design.

• Durable chromium rich 316 stainless steel construction.• Resistant to aging and weathering, - no soluble or hygroscopic ingredients.

• Designed for high volume of char and rapid expansion.• Will not damage outside of pipe.• No sealant or welding required.

Water-tight, factory-manufactured, intumescent device for use as a penetration seal in fire-rated bulkheads and decks.Water-tight firestop collars are comprised of a stainless steel body with a mild steel flange for easy weld attachment and lined with a molded, intumescent insert that rapidly expands more than 60 times to contain the fire to the point of origin, restricting the passage of fire, smoke and hot gases. A rubber bushing is integrated into the collar to ensure water-tightness.

Factory-manufactured devices designed for use in fire-rated divisions to protect transitions between metal and plastic pipes.The stainless steel shell is lined with a molded, intumescent insert. These easy to install transitional collars can retrofit around existing pipes to restrict the passage of fire, smoke, and hot gases at transitions between plastic pipes and steel pipes or scuppers.

MFC-W MFC-T

Water-Tight Firestop Collars Transitional Firestop Collars

Features & Benefits:

Applications:

• Heavy gauge, chromium rich 316 stainless steel construction

• Provides water-tightness up to 4 bar and gas-tightness up to 1 bar.

Note: Features a watertight rubber grommet rated up to 6 bar

• Solid design requires pipe to be inserted through the water-tight bushing.

• Flexible intumescent liner accommodates vibration and will not damage pipe

• Resistant to aging and weathering

• Available in 21 different sizes to fit common pipes ranging from 16 mm to 324 mm.

• Applications were tested for common plastic pipes, including PVC, PVDF, CPVC, Pb, PE, PE-AL-PE, ABS and GRE, GRP, FRP steel and copper pipes through pressure rated bulkheads and decks.


Flexible WaterResistant

SmokeBarrier

FinishedProduct

LightweightNoise

ReductionPaintable

Plastic Pipes

Plastic Pipes

No Expiration

MetallicPipes

MetallicPipesFlexible

WaterResistant

SmokeBarrier

FinishedProduct

Lightweight

NoiseReduction

Paintable

Intumescent

No Expiration Water-Tight


Tested to IMO FTP Code 2010, Part 3- Class A-0 to A-60 (Decks)*Consult Factory for Most Current Testing & Approvals

1918

This two-component RTV silicone foam features excellent crack-and-void filling capabilities and provides high resilience to accommodate vibration.MRF is designed as a seal for both deck and bulkhead pipe penetrations, which when properly mixed, expands 2 to 4 times its original volume, filling available spaces and forming an effective barrier against fire, smoke, hot gas and water penetration.

MCC MRF

RTV Firestop Foam

• Sand-able and paintable (when dry).• Safe - low VOCs, no solvents, non-

halogenated.• Excellent sealing properties along

with high build capabilities.

• Excellent water resistance, adhesion and smoke seal.

• Uniform cell structure ensures reproducible results every time. No charts to check!

• Minimal pressure during foaming virtually eliminates shrinkage

• Elastic properties readily accommodate minor vibration of pipe and conduit

• Soft setting foam for easy retrofitting of cables.

• Offers protection of grouped electrical, data, or communications cables in cable tray or racked cable applications.

• Applied using airless spray equipment or by brush.

• Applied in liquid form (with proper damming) and then foams in place, readily sealing around penetrating items such as conduits, cables, duct work or mechanical piping.

• Useful in sealing areas such as control rooms against infiltration of airborne contaminants such as coal dust and dirt.

• Ideal for use as a thermal or acoustical insulation, or for vibration dampening.

This latex-based coating cleans up easily with water and is designed to protect grouped electrical cables against the propagation of fire. MCC contains endothermic fillers that absorb heat and release water, limiting the spread of flames along cables and cable trays. The high solids coating eliminates shrinkage and adheres well to virtually all cable jacketing materials providing exceptional coverage rates.

Cable Coating

Features & Benefits: Features & Benefits:Applications: Applications:

Low VOCFlexible

All Weather

WaterResistant

LightweightCable

Protection

PaintableIntumescent

Cables

BlankOpening

FlexibleSmokeBarrier

Lightweight

Re-EnterableAutobonding

NoiseReduction


MetallicPipes

Tested to FM Approval Class 3971 for GroupedElectrical Cables that are nonflammable coatingsand Category A of IEC publication 60332-3-22 andIEC 60331 and IEEE 383/1202*Consult Factory for Most Current Testing & Approvals


2120

UPC# 730573 CAT. NO. Description - Cable Loading Area/Cable Transit: 12.0 in.² (77cm²) Case Qty. Weight

40005 MDM150A Marine 150 Single Solid Plate Kit w/ Device 1 3.60 kg (8.00 lbs)

40006 MDM150B Marine 150 Four Gang Solid Plate Kit w/ 4 Devices 1 8.80 kg (19.50 lbs)

40008 MDM150Y Marine 150 Single Solid Plate Kit w/ Device – For DNV Requirements 1 3.80 kg (8.50 lbs)

40009 MDM150Z Marine 150 Four Gang Solid Plate Kit w/ 4 Devices – For DNV Requirements 1 9.70 kg (21.50 lbs)


40089 MDM400A Marine 400 Single Solid Plate Kit and Cable Transit Unit 1 3.90 kg (8.60 lbs)

40046 MDM400B Marine 400 Single Split Plate Kit and Cable Transit Unit 1 3.90 kg (8.60 lbs)

40047 MDM400C Marine 400 Two-Gang Solid Plate Kit with Two Cable Transit Units 1 6.70 kg (14.90 lbs)

40048 MDM400D Marine 400 Two-Gang Split Plate Kit with Two Cable Transit Units 1 7.80 kg (17.20 lbs)

40445 MDM400G Marine 400 Four-Gang Solid Plate Kit with Four Cable Transit Units 1 12.30 kg (27.30 lbs)


40007 MDM300A Marine 300 EZ-Path® with Integrated Solid Plate 1 2.00 kg (4.4 lbs)

UPC# 730573 CAT. NO. Description Case Qty. Weight

42101 MPU28 28 cu. in. (458.8 ml) Putty Bar 25 0.80 kg (1.85 lbs)

42107 MPU52 Firestop Putty Coils Packaged In 3.5 Gallon (13.2 L) Pail NA 13.90 kg (30.8 lbs)


47105 MSS25 Two-Piece Split Cable Plug 100 2.20 kg (4.80 lbs)


Firestop Putty

Snap-Seal Cable Plug

Ordering Information


41310 MFS100 M-PACT™ Marine Firestop Sealant, red*, 281 mL cartridge (9.5 oz/17.1 cubic inch) 12 0.50 kg (1.18 lb)

41312 MFS120 M-PACT™ Marine Firestop Sealant, red*, 590 mL sausage (20 oz/36.1 cubic inch) 12 0.88 kg (1.95 lb)

44005 MFB530 M-PACT™ Filler Blanket, noncombustible packing material, 12.7 cm x 914 cm (5 in. x 360 in.) roll 5 Rolls 6.11 kg (13.46 lb)

44004 MWS250 Marine Wrap Strip, 6 mm thick x 50 mm wide x 365 cm (0.25 x 2 x 144 inch) 8 Rolls 1.53 kg (3.38 lb)

M-PACT Marine Pipe and Cable Transit(Including Marine Firestop Sealant and Wrap Strip)


43116 MFC16 16 mm Marine Traditional Firestop Collar 12 0.09 kg (0.20 lbs)





















Traditional Firestop Collars

*Custom colors may be available. Minumum order quantities apply.

2322


43117 MFC16W 16 mm Water-Tight Marine Firestop Collar 12 0.09 kg (0.20 lbs)






















43905 MFC50T 50mm Steel & Plastic pipe 6 0.54 kg (1.20 lbs)

43912 MFC56T 50mm Steel pipe/60mm Plastic Pipe 6 0.59 kg (1.30 lbs)


43908 MFC79T 75mm Steel pipe/90mm Plastic pipe 6 0.91 kg (2.00 lbs)



43919 MFC300G 300 mm Marine Firestop Collar for Large Diameter GRE/GRP Pipe 1 7.17 kg (15.80 lbs)







Water-Tight Firestop Collars

Transitional Firestop Collars

GRE/GRP Large Diameter Firestop Collars


43911 MRF500 45.4 Kg (100 lb) Kit: 22.7 Kg (50 lb) Part A, 22.7 Kg (50 lb) Part B NA 45.30 kg (100.00 lbs)


47104 MCC105 Marine Cable Coating - 1155 Cu. In. (19 L) NA 24.90kg (55.00 lbs)

RTV Firestop Foam

Cable Coating

STI Marine, A Division of Specified Technologies Inc., focuses on developing and manufacturing a wide array of systems for sealing penetrations through fire-rated bulkheads and decks. Safety of life at sea is paramount, and our fully IMO FTP compliant solutions are subject to Type Approvals by major Classification Societies to ensure peace of mind. In the shipyard production environment, we focus on solutions that are easier and more economical to install, saving the shipyard valuable production hours and enhancing productivity. For ship owners and operators, providing the best life-cycle cost matters, and many STI Marine solutions are maintenance-free and can allow for easy modifications while in dry dock, or at sea without disturbing passenger comfort or safety.

STI Marine’s team of experienced professionals is ready to assist on your next project. We employ field representatives all over the globe to provide expert one-on-one support and training in your office or in the shipyard. We have engineering offices in different countries to provide technical support for even the most complicated applications or custom situations. Count on us to provide the support your team needs to make your next build successful. For over 25 years, STI has been the leader in developing innovative firestopping solutions- whether on land or at sea. Trust STI for Service, Technology, and Innovation; pillars for our success and yours!

STI Marine - A Division of Specified Technologies Inc.

ChinaRegional Office

Room 2111,21/FBlock C, South Tower, The Hub,

1068 XinGangDong Road,Haizhou District, Guangzhou China

SingaporeRegional Office

Thomson Road Post OfficeP.O.Box 171

Singapore 915706

BrazilRegional Office

Av. Tancredo Neves, 450Edifício Suarez Trade, 16º Andar

Salvador, BA 41820-901

North AmericaCorporate Headquarters

210 Evans WaySomerville, NJ 08876 USA

EuropeRegional Office

118 Avenue de France75013 Paris, France

Middle EastRegional OfficeP.O. Box: 22952

Dubai, UAE

IndiaRegional Office

MumbaiMaharashtra, India

[email protected]

W W W . S T I M A R I N E . C O M

Find Products & Support Worldwide

STI Marine Firestop Products are available worldwide through an integrated distribution network.

Local STI offices are on call to provide unparalleled technical support for all of your project-specific

conditions. Schedule time with an STI representative today to learn more about these great products

and services. To do so, call us at +1 908.526.8000 or visit us online at www.stimarine.com.

ZSTI3428 - 2246

Documents

Cable Transits & Penetration Seals - STI Marine Firestop · Cable Transits & Penetration Seals for Fire-Rated Divisions FIRE WATER SMOKE