2
ÖPVC-JZ/OZ-CY Anwendung als Energie-, Steuer-, Anschluss- und Verbindungsleitung in elektrischen Anlagen, für störfreie Daten- und Signalübertragung, für feste Verlegung und flexible  Anwendungen bei freier Bewegung ohne Zugbeanspruchung und ohne zwangsweise Führung. Geeignet für Verlegung in trockenen und feuchten Räumen, jedoch nicht im Freien ohne UV-Schutz und nicht im Erdreich. Besonderheiten 4 kV Prüfspannung weitgehend beständig gegen Säuren, Laugen und bestimmte Öle. LBS-frei/silikonfrei (bei Produktion) platzsparende Alternative zu ÖPVC-JZ/OZ-YCY empfohlen für EMV gerechte Anwendung Hinweise RoHS-konform konform zur 73/23/EWG-Richtlinie ("Niederspannungsrich tlinie") CE. Sonderausführungen , andere Abmessungen, Querschnitte, Ader- und Mantelfarben fertigen wir auf Anfrage. Aufbau & Technische Daten Leiter Werkstoff Cu-Litze blank Leiterklas se na ch DIN VDE 02 95 Kl asse 5 bz w. IEC 22 8 class 5  Aderisolationswerkstoff PVC  Aderkennung nach DIN VDE 0293 schwarze Adern mit weissen Ziffern mit oder ohne gn/ge Verseilung Adern in Lagen verseilt Ge samt schi rm Cu -Gef lech t verz innt ; op t. Bede ckung ca. 85 %  Außenmantelwerksto ff PVC Mantelfarbe grau, RAL 7001  Nennspannung Uo/U: 300/500 V Prüf sp an nu ng Ader/Ader: 4 kV Ad er /S ch ir m: 2 kV Leiterwiderstand na ch DIN VDE 0295 Kl asse 5 bzw. IEC 22 8 class 5 Isolat io ns wi de rstand mi n. 20 MΩ x km Str omb ela stb arkeit gem. DIN VDE , sie he Tec hni sch er Anh ang Kap a zi t ät Ade r/ Ader ca. 120 nF /k m; Ader /S ch irm ca. 155 nF/km Induktivität ca. 0,67 mH/km kleins ter Bie ger adi us fes t 6 x d kleinster Bieg eradi us b ewegt 15 x d Betr iebst emp. fest min/max -30 °C / +80 °C Betr iebst emp. bew. min/max - 5 °C / +70 ° C Temp eratur am L eiter max. + 70 °C im B etrie b; +15 0 °C im Kurzs chlußfall Bran dv erha lt en selbst ve rlöschend un d fl ammwidri g nach IEC 332-1 Sta nda rd in Anl eh n ung an DIN VDE 0245, 0250 und 02 81 Application power, control and connecting cable in electrical facilities for lossless data and signal transmission, fixed laying and flexible applications without tensile stress and without defined cable routing. Suitable for use in dry, humid and wet rooms. Outdoor use only with UV-protection, no laying underground. Special features 4 kV testing voltage largely resistant to acids, bases and usual oils free from lacquer damaging substances and silicone (during production) space-saving alternative to ÖPVC-JZ/OZ-Y CY recommended for EMC-applications Remarks conform to RoHS conform to 73/23/EWG-Guideline CE. We are pleased to produce special versions, other dimensions, core and jacket colours on request. Structure & Specifications cond uc to r ma te rial ba re co pp er st ra nd cond ucto r cl ass acc. to DIN VDE 02 95 class 5 re sp. IEC 228 cl ass 5 core insulation PVC core iden tifi cati on ac c. to DIN VDE 02 93 bl ack cores with white numerals with or without gn/ye stranding stranded in layers overall shield co pp er braid tinn ed ; co ve ra ge ap pr ox. 85 % outer sheath PVC sheath colour grey, RAL 7001  rated voltage Uo/U: 300/500 V te st in g volt ag e core /c ore: 4 kV co re /s hi el d: 2 kV conduc tor resistance acc . to DIN VDE 0295 cla ss 5 res p. IEC 228 cla ss 5 insula ti on resistan ce mi n. 20 MΩ x km current carry ing capac ity acc. to DIN VDE, see Technical Guide lines ca pa ci t y core/core ca. 120 nF /k m; core /s hi el d ca. 15 5 nF /k m inductivity ca. 0,67 mH/km min. ben din g radius fix ed 6 x d min. bend ing radius moved 15 x d operat. temp. fixed min/max -30 °C / +8 0 °C operat. temp. moved min/max - 5 °C / +70 C temp. at con duc tor + 70 °C in ope rat ion; +150 °C in cas e of short- cir cui t burnin g beh avi or sel f-e xtinguishing and flame-retardant acc. to IEC 332-1 standard acc. to DIN VDE 0245, 0250 and 0281 01.01.06  01.01.06 Application Structure & Specifications Special features Remarks Hinweise Besonderheiten Anwendung Aufbau & Technische Daten ÖPVC-JZ/OZ-CY power, control and connecting cable in electrical facilities for lossless data and signal transmission, fixed laying and flexible applications without tensile stress and without defined cable routing. Suitable for use in dry, humid and wet rooms. Outdoor use only with UV-protection, no laying underground. 4 kV Prüfspannung weitgehend beständig gegen Säuren, Laugen und bestimmte Öle. LBS-frei/silikonfrei (bei Produktion) platzsparende Alternative zu ÖPVC-JZ/OZ-YCY empfohlen für EMV gerechte Anwendung als Energie-, Steuer-, Anschluss- und Verbindungsleitung in elektrischen Anlagen, für störfreie Daten- und Signalübertragung, für feste Verlegung und flexible  Anwendungen bei freier Bewegung ohne Zugbeanspruchung und ohne zwangsweise Führung. Geeignet für Verlegung in trockenen und feuchten Räumen, jedoch nicht im Freien ohne UV-Schutz und nicht im Erdreich. RoHS-konform konform zur 73/23/EWG-Richtlinie ("Niederspannungsrich tlinie") CE. Sonderausführungen , andere Abmessungen, Querschnitte, Ader- und Mantelfarben fertigen wir auf Anfrage. Leiter Werkstoff Cu-Litze blank Leiterklas se na ch DIN VDE 02 95 Kl asse 5 bz w. IEC 22 8 class 5  Aderisolationswerkstoff PVC  Aderkennung nach DIN VDE 0293 schwarze Adern mit weissen Ziffern mit oder ohne gn/ge Verseilung Adern in Lagen verseilt Ge samt schi rm Cu -Gef lech t verz innt ; op t. Bede ckung ca. 85 %  Außenmantelwerksto ff PVC Mantelfarbe grau, RAL 7001  Nennspannung Uo/U: 300/500 V Prüf sp an nu ng Ader/Ader: 4 kV Ad er /S ch ir m: 2 kV Leiterwiderstand na ch DIN VDE 0295 Kl asse 5 bzw. IEC 22 8 class 5 Isolat io ns wi de rstand mi n. 20 MΩ x km Str omb ela stb arkeit gem. DIN VDE , sie he Tec hni sch er Anh ang Kap a zi t ät Ade r/ Ader ca. 120 nF /k m; Ader /S ch irm ca. 155 nF/km Induktivität ca. 0,67 mH/km kleins ter Bie ger adi us fes t 6 x d kleinster Bieg eradi us b ewegt 15 x d Betr iebst emp. fest min/max -30 °C / +80 °C Betr iebst emp. bew. min/max - 5 °C / +70 ° C Temp eratur am L eiter max. + 70 °C im B etrie b; +15 0 °C im Kurzs chlußfall Bran dv erha lt en selbst ve rlöschend un d fl ammwidri g nach IEC 332-1 Sta nda rd in Anl eh n ung an DIN VDE 0245, 0250 und 02 81 cond uc to r ma te rial ba re co pp er st ra nd cond ucto r cl ass acc. to DIN VDE 02 95 class 5 re sp. IEC 228 cl ass 5 core insulation PVC core iden tifi cati on ac c. to DIN VDE 02 93 bl ack cores with white numerals with or without gn/ye stranding stranded in layers overall shield co pp er braid tinn ed ; co ve ra ge ap pr ox. 85 % outer sheath PVC sheath colour grey, RAL 7001  rated voltage Uo/U: 300/500 V te st in g volt ag e core /c ore: 4 kV co re /s hi el d: 2 kV conduc tor resistance acc . to DIN VDE 0295 cla ss 5 res p. IEC 228 cla ss 5 insula ti on resistan ce mi n. 20 MΩ x km current carry ing capac ity acc. to DIN VDE, see Technical Guide lines ca pa ci t y core/core ca. 120 nF /k m; core /s hi el d ca. 15 5 nF /k m inductivity ca. 0,67 mH/km min. ben din g radius fix ed 6 x d min. bend ing radius moved 15 x d operat. temp. fixed min/max -30 °C / +8 0 °C operat. temp. moved min/max - 5 °C / +70 C temp. at con duc tor + 70 °C in ope rat ion; +150 °C in cas e of short- cir cui t burnin g beh avi or sel f-e xtinguishing and flame-retardant acc. to IEC 332-1 standard acc. to DIN VDE 0245, 0250 and 0281 conform to RoHS conform to 73/23/EWG-Guideline CE. We are pleased to produce special versions, other dimensions, core and jacket colours on request. 4 kV testing voltage largely resistant to acids, bases and usual oils free from lacquer damaging substances and silicone (during production) space-saving alternative to ÖPVC-JZ/OZ-Y CY recommended for EMC-applications

Cable de Control Extra Flexible ado -Marca Tkd Alemania

Embed Size (px)

Citation preview

Page 1: Cable de Control Extra Flexible ado -Marca Tkd Alemania

8/2/2019 Cable de Control Extra Flexible ado -Marca Tkd Alemania

http://slidepdf.com/reader/full/cable-de-control-extra-flexible-ado-marca-tkd-alemania 1/2

ÖPVC-JZ/OZ-CY

Anwendung

als Energie-, Steuer-, Anschluss- und Verbindungsleitung in elektrischen Anlagen, für störfreie Daten- und Signalübertragung, für feste Verlegung und flexible Anwendungen bei freier Bewegung ohne Zugbeanspruchung und ohne zwangsweiseFührung. Geeignet für Verlegung in trockenen und feuchten Räumen, jedoch nicht imFreien ohne UV-Schutz und nicht im Erdreich.

Besonderheiten

4 kV Prüfspannung

weitgehend beständig gegen Säuren, Laugen und bestimmte Öle.LBS-frei/silikonfrei (bei Produktion)platzsparende Alternative zu ÖPVC-JZ/OZ-YCYempfohlen für EMV gerechte Anwendung

Hinweise

RoHS-konformkonform zur 73/23/EWG-Richtlinie ("Niederspannungsrichtlinie") CE.Sonderausführungen, andere Abmessungen, Querschnitte, Ader- undMantelfarben fertigen wir auf Anfrage.

Aufbau & Technische Daten

Leiter Werkstoff Cu-Litze blank

Leiterklasse nach DIN VDE 0295 Klasse 5 bzw. IEC 228 class 5

 Aderisolationswerkstoff PVC

 Aderkennung nach DIN VDE 0293 schwarze Adern mit weissenZiffern mit oder ohne gn/ge

Verseilung Adern in Lagen verseilt

Gesamtschirm Cu-Geflecht verzinnt; opt. Bedeckung ca. 85 %

 Außenmantelwerkstoff PVC

Mantelfarbe grau, RAL 7001

 

Nennspannung Uo/U: 300/500 V

Prüfspannung Ader/Ader: 4 kV Ader/Schirm: 2 kV

Leiterwiderstand nach DIN VDE 0295 Klasse 5 bzw. IEC 228 class 5

Isolationswiderstand min. 20 MΩ x km

Strombelastbarkeit gem. DIN VDE, siehe Technischer Anhang

Kapazität Ader/Ader ca. 120 nF/km; Ader/Schirm ca. 155nF/km

Induktivität ca. 0,67 mH/km

kleinster Biegeradius fest 6 x d

kleinster Biegeradius bewegt 15 x d

Betriebstemp. fest min/max -30 °C / +80 °C

Betriebstemp. bew. min/max - 5 °C / +70 °C

Temperatur am Leiter max. + 70 °C im Betrieb; +150 °C im Kurzschlußfall

Brandverhalten selbstverlöschend und flammwidrig nach IEC 332-1

Standard in Anlehnung an DIN VDE 0245, 0250 und 0281

Application

power, control and connecting cable in electrical facilities for lossless data and signaltransmission, fixed laying and flexible applications without tensile stress and withoutdefined cable routing. Suitable for use in dry, humid and wet rooms. Outdoor use onlywith UV-protection, no laying underground.

Special features

4 kV testing voltage

largely resistant to acids, bases and usual oilsfree from lacquer damaging substances and silicone (during production)space-saving alternative to ÖPVC-JZ/OZ-YCYrecommended for EMC-applications

Remarks

conform to RoHSconform to 73/23/EWG-Guideline CE.We are pleased to produce special versions, other dimensions, core and jacketcolours on request.

Structure & Specifications

conductor material bare copper strand

conductor class acc. to DIN VDE 0295 class 5 resp. IEC 228 class 5

core insulation PVC

core identification acc. to DIN VDE 0293 black cores with whitenumerals with or without gn/ye

stranding stranded in layers

overall shield copper braid tinned; coverage approx. 85 %

outer sheath PVC

sheath colour grey, RAL 7001

 

rated voltage Uo/U: 300/500 V

testing voltage core/core: 4 kV core/shield: 2 kV

conductor resistance acc. to DIN VDE 0295 class 5 resp. IEC 228 class 5

insulation resistance min. 20 MΩ x km

current carrying capacity acc. to DIN VDE, see Technical Guidelines

capacity core/core ca. 120 nF/km; core/shield ca. 155 nF/km

inductivity ca. 0,67 mH/km

min. bending radius fixed 6 x d

min. bending radius moved 15 x d

operat. temp. fixed min/max -30 °C / +80 °C

operat. temp. moved min/max - 5 °C / +70 C

temp. at conductor + 70 °C in operation; +150 °C in case of short-circuit

burning behavior self-extinguishing and flame-retardant acc. to IEC332-1

standard acc. to DIN VDE 0245, 0250 and 0281

01.01.0601.01.06

Application

Structure & Specifications

Special features

RemarksHinweise

Besonderheiten

Anwendung

Aufbau & Technische Daten

ÖPVC-JZ/OZ-CY

power, control and connecting cable in electrical facilities for lossless data and signaltransmission, fixed laying and flexible applications without tensile stress and withoutdefined cable routing. Suitable for use in dry, humid and wet rooms. Outdoor use onlywith UV-protection, no laying underground.

4 kV Prüfspannung

weitgehend beständig gegen Säuren, Laugen und bestimmte Öle.LBS-frei/silikonfrei (bei Produktion)platzsparende Alternative zu ÖPVC-JZ/OZ-YCYempfohlen für EMV gerechte Anwendung

als Energie-, Steuer-, Anschluss- und Verbindungsleitung in elektrischen Anlagen, für störfreie Daten- und Signalübertragung, für feste Verlegung und flexible Anwendungen bei freier Bewegung ohne Zugbeanspruchung und ohne zwangsweiseFührung. Geeignet für Verlegung in trockenen und feuchten Räumen, jedoch nicht imFreien ohne UV-Schutz und nicht im Erdreich.

RoHS-konformkonform zur 73/23/EWG-Richtlinie ("Niederspannungsrichtlinie") CE.Sonderausführungen, andere Abmessungen, Querschnitte, Ader- undMantelfarben fertigen wir auf Anfrage.

Leiter Werkstoff Cu-Litze blank

Leiterklasse nach DIN VDE 0295 Klasse 5 bzw. IEC 228 class 5

 Aderisolationswerkstoff PVC

 Aderkennung nach DIN VDE 0293 schwarze Adern mit weissenZiffern mit oder ohne gn/ge

Verseilung Adern in Lagen verseilt

Gesamtschirm Cu-Geflecht verzinnt; opt. Bedeckung ca. 85 %

 Außenmantelwerkstoff PVC

Mantelfarbe grau, RAL 7001

 

Nennspannung Uo/U: 300/500 V

Prüfspannung Ader/Ader: 4 kV Ader/Schirm: 2 kV

Leiterwiderstand nach DIN VDE 0295 Klasse 5 bzw. IEC 228 class 5

Isolationswiderstand min. 20 MΩ x km

Strombelastbarkeit gem. DIN VDE, siehe Technischer Anhang

Kapazität Ader/Ader ca. 120 nF/km; Ader/Schirm ca. 155nF/km

Induktivität ca. 0,67 mH/km

kleinster Biegeradius fest 6 x d

kleinster Biegeradius bewegt 15 x d

Betriebstemp. fest min/max -30 °C / +80 °C

Betriebstemp. bew. min/max - 5 °C / +70 °C

Temperatur am Leiter max. + 70 °C im Betrieb; +150 °C im Kurzschlußfall

Brandverhalten selbstverlöschend und flammwidrig nach IEC 332-1

Standard in Anlehnung an DIN VDE 0245, 0250 und 0281

conductor material bare copper strand

conductor class acc. to DIN VDE 0295 class 5 resp. IEC 228 class 5

core insulation PVC

core identification acc. to DIN VDE 0293 black cores with whitenumerals with or without gn/ye

stranding stranded in layers

overall shield copper braid tinned; coverage approx. 85 %

outer sheath PVC

sheath colour grey, RAL 7001

 

rated voltage Uo/U: 300/500 V

testing voltage core/core: 4 kV core/shield: 2 kV

conductor resistance acc. to DIN VDE 0295 class 5 resp. IEC 228 class 5

insulation resistance min. 20 MΩ x km

current carrying capacity acc. to DIN VDE, see Technical Guidelines

capacity core/core ca. 120 nF/km; core/shield ca. 155 nF/km

inductivity ca. 0,67 mH/km

min. bending radius fixed 6 x d

min. bending radius moved 15 x d

operat. temp. fixed min/max -30 °C / +80 °C

operat. temp. moved min/max - 5 °C / +70 C

temp. at conductor + 70 °C in operation; +150 °C in case of short-circuit

burning behavior self-extinguishing and flame-retardant acc. to IEC332-1

standard acc. to DIN VDE 0245, 0250 and 0281

conform to RoHSconform to 73/23/EWG-Guideline CE.We are pleased to produce special versions, other dimensions, core and jacketcolours on request.

4 kV testing voltage

largely resistant to acids, bases and usual oilsfree from lacquer damaging substances and silicone (during production)space-saving alternative to ÖPVC-JZ/OZ-YCYrecommended for EMC-applications

Page 2: Cable de Control Extra Flexible ado -Marca Tkd Alemania

8/2/2019 Cable de Control Extra Flexible ado -Marca Tkd Alemania

http://slidepdf.com/reader/full/cable-de-control-extra-flexible-ado-marca-tkd-alemania 2/2

ÖPVC-JZ/OZ-CY

 Abmessungdimension

n x mm²

 Außen-Øouter Ø

mm

Cu-Zahlcopper weight

kg/km

Gewichtweightkg/km

2 X 0,5 5,8 36,0 45,0

3 G 0,5 6,1 43,0 59,0

4 G 0,5 6,5 49,0 83,0

5 G 0,5 7,0 57,0 96,0

7 G 0,5 7,5 69,0 136,0

12 G 0,5 9,9 104,0 200,0

18 G 0,5 11,5 141,0 275,0

25 G 0,5 13,4 211,0 350,0

 

2 X 0,75 6,2 43,0 56,0

3 G 0,75 6,5 52,0 70,0

4 G 0,75 7,0 61,0 95,0

5 G 0,75 7,7 72,0 130,0

7 G 0,75 8,3 89,0 168,0

12 G 0,75 10,9 138,0 232,0

18 G 0,75 12,7 211,0 315,0

25 G 0,75 14,8 280,0 435,0

 

2 X 1,0 6,5 51,0 84,0

3 G 1,0 6,5 62,0 110,0

4 G 1,0 7,3 74,0 130,0

5 G 1,0 8,1 88,0 156,0

7 G 1,0 8,8 112,0 192,012 G 1,0 11,5 185,0 285,0

18 G 1,0 13,9 268,0 395,0

25 G 1,0 15,9 354,0 656,0

 

2 X 1,5 7,1 65,0 97,0

3 G 1,5 7,5 82,0 125,0

4 G 1,5 8,2 100,0 165,0

5 G 1,5 8,9 119,0 193,0

7 G 1,5 9,9 154,0 245,0

12 G 1,5 13,0 268,0 365,0

18 G 1,5 15,6 373,0 553,0

25 G 1,5 17,9 530,0 734,0

34 G 1,5 20,8 683,0 944,0

3 G 2,5 8,9 118,0 188,0

4 G 2,5 9,9 147,0 236,0

5 G 2,5 11,0 176,0 270,0

7 G 2,5 11,9 253,0 340,0

12 G 2,5 16,0 355,0 589,0

18 G 2,5 19,0 569,0 978,0

25 G 2,5 22,2 827,0 1.358,0

 Abmessungdimension

n x mm²

 Außen-Øouter Ø

mm

Cu-Zahlcopper weight

kg/km

Gewichtweightkg/km

4 G 4 11,6 248,0 305,0

7 G 4 14,4 355,0 500,0

 

4 G 6 14,2 343,0 440,0

7 G 6 17,0 505,0 672,0

 

4 G 10 17,2 535,0 710,0

7 G 10 21,4 820,0 1.305,0

 

4 G 16 20,2 800,0 1.050,0

7 G 16 24,8 1.470,0 1.813,0

 

4 G 25 25,1 1.075,0 1.570,0

4 G 35 30,4 1.576,0 2.070,0

 

01.01.06

 Abmessungdimension

n x mm²

 Außen-Øouter Ø

mm

Cu-Zahlcopper weight

kg/km

Gewichtweightkg/km

4 G 4 11,6 248,0 305,0

7 G 4 14,4 355,0 500,0

 

4 G 6 14,2 343,0 440,0

7 G 6 17,0 505,0 672,0

 

4 G 10 17,2 535,0 710,0

7 G 10 21,4 820,0 1.305,0

 

4 G 16 20,2 800,0 1.050,0

7 G 16 24,8 1.470,0 1.813,0

 

4 G 25 25,1 1.075,0 1.570,0

4 G 35 30,4 1.576,0 2.070,0

 

01.01.06

 Abmessungdimension

n x mm²

 Außen-Øouter Ø

mm

Cu-Zahlcopper weight

kg/km

Gewichtweightkg/km

2 X 0,5 5,8 36,0 45,0

3 G 0,5 6,1 43,0 59,0

4 G 0,5 6,5 49,0 83,0

5 G 0,5 7,0 57,0 96,0

7 G 0,5 7,5 69,0 136,0

12 G 0,5 9,9 104,0 200,0

18 G 0,5 11,5 141,0 275,0

25 G 0,5 13,4 211,0 350,0

 

2 X 0,75 6,2 43,0 56,0

3 G 0,75 6,5 52,0 70,0

4 G 0,75 7,0 61,0 95,0

5 G 0,75 7,7 72,0 130,0

7 G 0,75 8,3 89,0 168,0

12 G 0,75 10,9 138,0 232,0

18 G 0,75 12,7 211,0 315,0

25 G 0,75 14,8 280,0 435,0

 

2 X 1,0 6,5 51,0 84,0

3 G 1,0 6,5 62,0 110,0

4 G 1,0 7,3 74,0 130,0

5 G 1,0 8,1 88,0 156,0

7 G 1,0 8,8 112,0 192,012 G 1,0 11,5 185,0 285,0

18 G 1,0 13,9 268,0 395,0

25 G 1,0 15,9 354,0 656,0

 

2 X 1,5 7,1 65,0 97,0

3 G 1,5 7,5 82,0 125,0

4 G 1,5 8,2 100,0 165,0

5 G 1,5 8,9 119,0 193,0

7 G 1,5 9,9 154,0 245,0

12 G 1,5 13,0 268,0 365,0

18 G 1,5 15,6 373,0 553,0

25 G 1,5 17,9 530,0 734,0

34 G 1,5 20,8 683,0 944,0

3 G 2,5 8,9 118,0 188,0

4 G 2,5 9,9 147,0 236,0

5 G 2,5 11,0 176,0 270,0

7 G 2,5 11,9 253,0 340,0

12 G 2,5 16,0 355,0 589,0

18 G 2,5 19,0 569,0 978,0

25 G 2,5 22,2 827,0 1.358,0

ÖPVC-JZ/OZ-CY