green line Material Handling MachineC Series

94,500 lbs.

266 HP

835 M COVER (Q4) FINAL 4/7/05 8:51 AM Page 3

2

Working Attachments

Scrap Grapple

HookMagnet

Scrap Shear

Timber Grab

Concrete Cutter

Concrete Crusher

Recycling andDemolition Grab

Rehandling Grab

835 M INSIDES (Q4) FINAL 4/7/05 8:54 AM Page 2

3

• 6 cylinder, water cooled, turbo Caterpillar3126B diesel engine, with direct injection

• Output as per DIN/ISO: 266 HP at 2000 rpm

• Radiator fan is hydraulically driven and is reversible to clean out debris from radiator

• Equipped with engine intercooler• Dry air filter with cyclone prefilter, safety

element and pollution indicator

• Fuel tank capacity: 120 gallons• Electrical system:

24 volt, 2 x 12 volt high performance batteries

• Computer free load-sensing hydraulic systemwith energy saving flow on demand control andpressure cut off function

• All working functions can be operated simultaneously and be individually controlledvery precisely due to the independent and proportional split of the oil feed from the variable displacement pump

• Hydraulic system designed for low pressurelosses and heat generation by large diameterpiping and hoses as well as large control valves

• Pilot operated joy sticks control all working and auxiliary functions

• Flow rate 1 x 140 gpm• Working pressure 4931 psi• Hydraulic tank capacity: 79.25 gallons

• Special ultra fine filtration system (99.95% efficiency at 2 micron) designed to protect thehydraulic system, extending the life of all components and reducing the down time of the machine as well as the maintenance and repair costs

• Full flow return oil filters with extended change intervals

• Oversized hydraulic oil cooler, mounted completely separated from the water radiator,maintaining the oil temperature at an ideal level. The fan is hydraulically driven and thermostatically controlled

• Centralized pressure test ports, easily accessible from ground level, mounted and wellprotected on the left side of the machine, enablefast trouble shooting of all machine functions without any electronic support

• 25 kW Baldor generator, belt driven for easyoperation and maintenance, combined with aHubbell controller

• 0.75 to 1.5 cu. yds. scrap grapple with rotation,4 or 5 tine, open, semi-closed or closed, depending on the weight of the grapple andoperating reach

• 0.75 to 2.5 cu. yds. clamshell grapple with rotation, depending on the material density,weight of the grapple and operating reach

• Log grapple available in different sizes and configurations depending on material beinghandled

• Contact Sennebogen for approval of the attachment before operating the machine

• Always refer to the lifting capacities on thechart before installing any attachment

• Basic 835 with 4-point outriggers, material handling boom 27'10", stick 22'0" and scrapgrapple 1.5 cu. yds.

Approximate weight 94,500 lbs.Given weights may vary with different equipment

• Comfortable F2000 operator’s cab resiliently mounted

• Sound absorbing insulation• Roomy compartment with excellent

all-round visibility• All weather design with tinted safety glass• Door window as sliding window• Windshield can be pushed up under cab roof• Large skylight• Windshield wiper/washer on both windshield

and skylight• Sun visor• Large capacity storage bin• Ergonomically designed, air suspension and

heated seat with adjustable armrests and lumbar support

• Well laid out instrument panel withergonomically shaped joy sticks

• Adjustable steering column• Infinitely variable cab heating system, outside

air and circulating air stages with particle filter• Five adjustable air vents for optimum

work environment• New Sennebogen Diagnostic System (SDS) for

monitoring all essential machine and enginefunctions with visual and audible warning system

• 12 and 24 volt power supply• Air conditioning• AM/FM radio with cassette

• Axial piston motor, spring loaded hydraulicallyreleasable multiple disk brake, planetary gearand pinion shaft

• Large dimensioned swing bearing• Swing speed: 0 - 8 rpm, infinitely controllable• Hydraulic motor with integrated hydraulic brake

valves keep wear and tear of braking system toa minimum

• MP41 undercarriage welded as rigid, torsion-free box-type design

• 4-point outriggers• Lockable storage compartment• Tires: 8 x 12.00-20 solid rubber tires with

intermediate protector ringOption:• 8 pneumatic tires 12.00-20

• All wheel drive via variable hydraulic motor with directly mounted automatic brake valveand 2-stage powershift gear

• 2 circuit servo brake system with additionalsafety brake as parking brake

• Special design, heavy duty, extra wide, 60 t axles

• Steering axle as hydraulically controllable oscillating axle

• Oscillating axle cylinder with safety check valves

• 0 - 3.5 mph off road• 0 - 12.5 mph on road

• Torsion-free upper frame with continuous bearing-plates for optimal power introduction,precision machined

• Steel bushings for the boom pivot• Low noise emission

• Box-type design with large dimensioned sealedbearings for long working-life

• Grapple open-close and rotate circuits installedon the machine

• Working cylinders with hydraulic end position damping

• Optimized design for high lifting capacities• Equipped standard with safety check valves

(load holding valves) for boom and stick cylinders

• The 835 M C Series material handling equipment has been specially designed for the increased demands of high-performanceoperation, increased productivity and output

Specifications

Engine

Hydraulic System

Undercarriage

Uppercarriage

Operator’s Cab

■ Working radius up to 62'■ No computers required to control hydraulic system■ Ultra fine hydraulic oil filtration system reduces

maintenance cost and down time of machine

■ Central lubrication system standard■ State-of-the-art load-sensing hydraulic system■ Powerful, maintenance friendly design■ Low noise emission

Working Equipment

Swing System Magnet System

Operating Weight

Grapple

Certification according to regulations

Subject to technical modification

835 M INSIDES (Q4) FINAL 4/7/05 8:54 AM Page 5

4

835 M■ Undercarriage MP41, 4-point stabilizers

tires 8 x 12.00-20■ Boom: 27'10"■ Stick: 22'■ Boom position: I■ Cab: C 270 hydraulic elevating cab with

operator’s eye level 19'4"

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

- 6

- 5

- 4

- 3

- 2

- 1

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18,070

24,910

29,760

34,610

37,250

38,130

22,260

18,510

14,320

18,070

20,060

21,600

23,140

24,690

26,010

27,550

28,880

27,770

[12,560]

26,890

[11,900]

25,790

21,820

14,770

17,850

20,060

20,940

21,380

22,040

22,700

[11,020]

22,040

[10,360]

21,380

[9,920]

20,720

[9,470]

20,500

[9,030]

18,070

14,550

17,410

18,510

18,730

18,510

[9,250]

18,070

[8,810]

17,630

[18,370]

17,190

[7,930]

16,750

[7,710]

16,530

[7,490]

14,770

13,220

15,430

15,210

[7,490 ]

14,990

[7,270 ]

14,770

[7,050]

14,550

[6,830]

14,100

[6,610]

13,880

[6,390]

13,880

[6,170]

11,680

10,360

12,560

[6,170 ]

12,560

[5,950]

12,340

[5,950]

12,120

[5,730]

12,120

[5,510]

11,900

[5,510]

11,020

10,360

10,360

[4,850]

10,360

[4,620]

9,470

[16,530] [12,340]

[16,750] [12,560] [9,700]

[16,750] [12,560] [9,700] [7,710]

[16,530] [12,340] [9,700] [7,710] [6,170]

[22,480] [16,090] [12,120] [9,470]

[21,600] [15,430] [11,680]

[20,060] [14,550]

[18,290] [13,440]

[15,210] [11,460]

[4,850]

[16,750]

[15,650] [4,620]

[5,290]

[11,240] [9,030] [7,270] [6,170]

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75

0

5

10

15

20

25

30

35

40

45

50

55

-20

-15

-10

-5

Feet

Meters

FeetMeters

machine shown in mirror image19072002104203

Load chartNotes:Lifting capacities are stated in pounds. Indicated loads are based on ISO 10567 and do not exceed 75% of tipping and 87% of hydraulic capacity.Machine must be situated on firm, level ground. Loads valid for 360º. Loads in [ . . . ] are valid 360° free on wheels.Lifting capacities do not include working attachments such as scrap grapples, magnets, etc. Their weights must be deducted from the numbersindicated in the lifting charts.

Boom Position IK15

835 M INSIDES (Q4) FINAL 4/7/05 8:54 AM Page 6

5

835 M■ Undercarriage MP41, 4-point stabilizers

tires 8 x 12.00-20■ Boom: 31'10"■ Stick: 25'7"■ Boom position: I■ Cab: C 270 hydraulic elevating cab with

operator’s eye level 19'4"

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

- 7

- 6

- 5

- 4

- 3

- 2

- 1

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

13,220

26,890

33,500

35,710

26,450

14,990

12,780

12,560

14,100

16,090

17,410

19,400

20,720

23,140

24,910

26,450

27,550

26,890

[11,680]

25,790

[10,800]

24,690

21,380

11,240

14,320

16,090

17,410

18,730

19,620

20,280

21,160

21,820

21,600

[9,920]

20,720

[9,250]

20,060

[8,590]

19,400

[8,150]

18,070

14,770

11,680

14,100

16,090

17,630

17,410

17,630

18,070

17,850

[8,590]

17,190

[7,930]

16,530

[7,490]

16,090

[7,050]

15,650

[6,610]

15,210

12,560

11,460

13,880

15,430

15,430

15,210

[7,490]

14,990

[7,270]

14,550

[6,830]

14,100

[6,390]

13,660

[6,170]

13,450

[5,730]

13,000

[5,510]

12,780

10,580

10,580

13,000

12,780

[6,170]

12,780

[6,170]

12,340

[5,950]

12,120

[5,510]

11,900

[5,290]

11,680

[5,070]

11,460

[4,850]

11,240

[4,620]

10,580

8,590

10,800

[5,070]

10,580

[4,850]

10,580

[4,850]

10,360

[4,620]

10,140

[4,400]

9,920

[4,180]

9,700

[4,180]

9,700

[3,960]

8,150

9,030

[3,960]

8,810

[3,740]

8,810

[3,740]

8,590

[3,520]

8,600

[3,520]

7,490

[12,780] [9,920]

[13,000] [10,140] [7,930]

[13,220] [10,140] [7,930] [6,390]

[17,410] [13,000] [10,140] [7,930] [6,390] [5,070]

[16,970] [12,780] [9,920] [7,710]

[16,310] [12,120] [9,470]

[21,600] [15,430] [11,460] [9,030]

[19,620] [14,100] [10,800]

[17,410] [12,780]

[15,430]

[14,100]

[10,140] [3,520]

[9,920] [7,930] [6,390] [5,290] [4,620] [3,960]

[6,390]

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75

0

5

10

15

20

25

30

35

40

45

50

55

60

-25

-20

-15

-10

-5

Feet

Meters

FeetMeters

machine shown in mirror image19072002064341

Boom Position IK17

835 M INSIDES (Q4) FINAL 4/7/05 8:54 AM Page 9

6

835 M■ Undercarriage MP41, 4-point stabilizers

tires 8 x 12.00-20■ Boom: 35'1" banana type■ Stick: 25'7"■ Boom position: I■ Cab: C 300/260 hydraulic elevating and forward

moving cab with operator’s eye level 20'8"

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23- 10

- 9

- 8

- 7

- 6

- 5

- 4

- 3

- 2

- 1

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

25,350

28,650

31,740

14,550

11,020

10,360

10,360

10,800

18,730

20,500

22,480

24,250

25,350

21,380

16,970

15,430

14,990

9,920

14,770

15,430

16,310

17,410

18,510

19,620

19,840

[8,150]

18,950

[6,170]

18,290

[7,050]

17,850

[6,610]

17,630

[6,390]

16,530

10,360

12,780

13,220

13,440

13,880

14,320

15,210

15,870

16,530

15,870

[6,610]

15,210

[5,070]

14,770

[5,730]

14,550

[5,510]

14,320

[5,290]

14,100

10,360

12,120

12,340

12,560

13,000

13,440

13,880

13,660

[5,950]

13,220

[5,510]

12,780

[4,180]

12,340

[4,850]

12,120

[4,620]

11,900

[4,400]

11,900

[4,400]

9,920

11,460

11,460

11,900

12,120

11,900

[5,290]

11,460

[4,850]

11,240

[4,620]

10,800

[3,520]

10,580

[3,960]

10,360

[3,740]

10,140

[3,740]

10,140

[3,740]

8,590

10,800

10,580

[4,620]

10,360

[4,400]

10,140

[4,180]

9,700

[3,960]

9,470

[3,740]

9,250

[3,080]

9,030

[3,300]

9,030

[3,300]

8,810

[3,080]

8,590

8,150

8,810

[3,740]

8,590

[3,520]

8,370

[3,300]

8,150

[3,080]

8,150

7,930

[2,860]

7,930

[2,860]

[10,140]

[10,140] [7,930]

[10,140] [7,930] [6,390]

[13,000] [9,920] [7,930] [6,170] [5,070]

[12,560] [9,700] [7,710] [6,170] [4,850]

[15,870] [11,900] [9,250] [7,270] [5,950] [3,740]

[20,500] [14,550] [11,020] [8,590] [6,830] [5,510]

[17,850] [13,220] [10,140] [7,930] [6,390]

[15,210] [11,680] [9,030] [7,270]

[13,220] [10,360]

[9,250] [7,490]

[8,370]

[8,150]

[8,590]

[6,390] [5,070]

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75

0

5

10

15

20

25

30

35

40

45

50

55

60

-35

-30

-25

-20

-15

-10

-5

Feet

Meters

FeetMeters

machine shown in mirror image0508200209025

Boom Position IB18

835 M INSIDES (Q4) FINAL 4/7/05 8:54 AM Page 10

7

835 M■ Undercarriage MP41, 4-point stabilizers

tires 8 x 12.00-20■ Boom: 27'10"■ Stick: 21' with reversing mechanism■ Boom position: I■ Cab: C 270 hydraulic elevating cab with

operator’s eye level 19'4"

0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

- 5

- 4

- 3

- 2

- 1

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

17,410

20,500

26,450

31,960

34,830

37,250

35,270

20,060

17,410

17,850

20,280

22,040

23,800

24,690

26,010

27,550

28,430

[13,000]

27,330

[12,120]

26,670

[11,460]

24,690

20,280

13,880

17,630

20,280

20,720

21,380

22,040

22,260

[14,100]

21,600

[10,140]

20,940

[9,470]

20,500

[9,030]

20,060

16,970

13,660

17,190

18,290

18,290

[9,030]

18,070

[8,810]

17,630

[10,580]

17,190

[7,930]

16,750

[7,710]

16,530

[7,270]

16,310

[7,050]

13,660

12,120

14,990

[7,270]

14,770

[7,270]

14,770

[7,050]

14,320

[8,370]

14,100

[6,610]

13,880

[6,170]

13,660

[6,170]

13,220

12,340

[5,730]

12,120

[5,730]

12,120

[6,830]

11,900

[5,290]

11,680

[5,290]

11,460

[5,070]

10,140

[20,940] [14,990] [11,240]

[16,310] [12,120] [9,250]

[16,090] [11,900]

[12,120] [9,250] [7,270][16,310]

[16,090] [11,900] [9,250]

[22,040] [15,650] [11,680]

[14,990] [11,240] [8,810]

[11,020] [8,590] [7,050]

[29,540] [19,400]

[5,950] [5,070]

[17,630]

[16,090]

[15,210]

[5,510]

0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75

0

5

10

15

20

25

30

35

40

45

50

55

60

-20

-15

-10

-5

Feet

Meters

FeetMeters

machine shown in mirror image05082002124759

Boom Position IK15

835 M INSIDES (Q4) FINAL 4/7/05 8:54 AM Page 11

8

21'2"

11'4"

9'10"

11'6"

8'6" 7'3"

10'6"

8'10"

19'10"

11'

10'6"

18'

19'8"

4'9"

9'10"

11'4"

9'10"

14'5"

15'9"

4"1'

Machine Specifications

■ 835 M with 8'10" hydraulic elevating Cab Type C 270

■ 835 M with hydraulic elevating and forward moving Cab Type C 300/260

Depending upon tolerances, measurements may vary.

835 M INSIDES (Q4) FINAL 4/7/05 8:54 AM Page 8

9

10'6"

13'7"

10'2"

10'6"

18'

19'8"

4'9"

■ 835 M with hi-rise cab, standard height 3'3"

Available with optional 5', 6'7" or higher models.Hydraulic tilting mechanism for easy transportation is standard on all hi-rise cabs.

835 M INSIDES (Q4) FINAL 4/7/05 8:54 AM Page 7

10

42'

11'4"10'8"

45'3

11'4"11'

48'7"

11'4"11'2"

41'4"

11'4"10'6"

Shipping Specifications

835 M with Boom 27'10" and Stick 22'

835 M with Banana Boom 35'1" and Stick 25'7"

835 M with Boom 31'10" and Stick 25'7"

835 M with Boom 27'10" and special Stick 21' with reversing mechanism

835 M INSIDES (Q4) FINAL 4/7/05 8:54 AM Page 4

11

Notes

835 M INSIDES (Q4) FINAL 4/7/05 8:54 AM Page 3

835

M-C

-US

A-0

305-

3

Large engine compartment■ Powerful water-cooled Caterpillar diesel engine

longitudinally mounted for ease of access■ Daily service conveniently and easily performed

from ground level■ Large access door with gas shocks provide easy

access to engine compartment

Left side compartment holds key components■ Diesel tank■ Electrical box with all fuses and relays for easy access

and centralized electrical maintenance■ Central lubrication system■ Centralized pressure test ports for trouble shooting

of all working functions

Serviceability■ The C Series machines offer a coarse particle separator

at the front of engine cooler and air filter■ Ease of access for air filter and battery maintenance■ Hydraulic oil cooler separated from radiator, mounted on

the left side towards the back of the machine, hydraulicallydriven and easy to clean

■ The radiator fan is reversible and controlled from the cab,allowing the driver to clean out any debris from the radiator compartment

Comfortable F2000 operator’s cab■ Advanced design, clear layout■ Low noise and vibration■ Excellent all-round visibility■ Fully adjustable air suspension seat, heated■ Heating and air conditioning with fresh / recirculation

airflow and air filter■ Adjustable steering column

Under our policy of continuous improvement, we reserve the right to change specificationsand design without prior notice. The illustrations shown may include optional equipment.

SENNEBOGEN LLC2835 Jeff Adams Drive, Suite HCharlotte, NC 28206Telephone (Toll Free) 1-877-309-0099Fax: 704-347-8894E-Mail: sales@sennebogen-na.com

www.sennebogen-na.com

835 M COVER (Q4) FINAL 4/7/05 9:06 AM Page 2