Compass Pointdesigned by Heidi Pridemore of The Whimsical Workshop

featuring the Seven Seas fabric collection by Whistler StudiosQuilt size: 60” x 60”

windhamfabrics.com01.11.2019

please note: before making your project, check for any pattern updates at windhamfabrics.com’s free projects section.

e: info@windhamfabrics.com p: 201-659-0444 • f: 201-659-9719

this is a digital representation of the quilt top, fabric may vary.

FREEPROJECT

Compass Point

1

windhamfabrics.com

KEY FABRIC SKU YD CUTTING INSTRUCTIONS

A 51381D-X multi 7/8 • Fussy cut (1) 22-1/2” square centered on globe.

B 51385-4charcoal 1-1/3

• (2) 2-7/8” x width of fabric (WOF). Sub-cut the strips into(24) 2 7/8” squares.

• (3) 1-1/2” x WOF strips. Sew the strips together end toend with diagonal seams and cut (2) 1-1/2” x 50-1/2” strips.

• (3) 1-1/2” x WOF strips. Sew the strips together end toend with diagonal seams and cut (2) 1-1/2” x 48-1/2” strips.

• (2) 1-1/2” x 24-1/2” WOF strips.• (2) 1-1/2” x 22-1/2” WOF strips.• (48) Template 1 triangles.Binding• (6) 2-1/2” x WOF strips for the binding.

C 51384-1 grey 5/8

• (2) 2-7/8” x WOF strips. Sub-cut the strips into (24) 2-7/8”squares.

• (48) Template 2 triangles.

D 37098-2 ash 1 • (4) 2-1/2” x WOF strips.

• (48) Template 3 triangles.

E 51383-2 almond

1 • (4) 2-1/2” x WOF strips.• (48) Template 4 triangles.

F 51385-1 grey 1-1/4

• (8) 2-1/2” x WOF strips.• (48) Template 1 triangles.• (48) Template 2 triangles.

G 51383-1 grey 5/8

• (20) Template 7 triangles.• (20) Template 5 triangles.• (4) Template 6 diamonds.

H 51382-2 almond 3/4 • (40) Template 8 triangles.

I 51384-3 green 5/8 • (24) Template 5 triangles.

• (24) Template 7 triangles.

Backing 3-7/8 Batting 68” x 68”

Compass Point

2

windhamfabrics.com

Fig. 1

Fig. 2 Fig. 3 Fig. 5

Fig. 6

Fig. 4

Block AssemblyNote: Pay attention to the orientation of the units when assembling the quilt top components.1. Sew (1) B 1-1/2” x 22-1/2” strip to each side of (1) A 22-1/2” square. Sew (1) B 1-1/2” x 24-1/2” strip to the top and to the bottom of the A square to make the Center Block (Fig. 1).

Center Block

A

B

B

B B

Unit 1make 48

C

B

Unit 2make 12

Unit 1

Unit 1

Unit 1

Unit 1

Unit 3make 48

T1F

T2F

T3D

T4E

2. Place (1) C 2-7/8” square on top of (1) B 2-7/8” square, right sides together. Draw a line across the diagonal of the top square (Fig. 2). Sew 1/4” away from each side of the drawn diagonal line (Fig. 2). Cut the (2) squares apart on the drawn diagonal line (Fig. 3) to make (2) half-square triangles. Trim the half-square triangles to measure 2-1/2” square to make (2) Unit 1 squares (Fig. 4). Repeat to make (48) Unit 1 squares total.

3. Sew (4) Unit 1 squares together to make (1) Unit 2 square (Fig. 5). Repeat to make (12) Unit 2 squares total.

4. Sew (1) F Template 2 triangle, (1) D Template-3 triangle, (1) E Template 4 triangle and (1) F Template 1 triangle together as shown in Figure 6 to make (1) Unit 3 square. Trim unit to measure 4-1/2” square. Repeat to make (48) Unit 3 squares total.

Compass Point

3

windhamfabrics.com

Fig. 11

Fig. 13 Fig. 14 Fig. 15

Fig. 12

F E

make 4 setsUnit 4cut 48

T1

T1

F D

make 4 setsUnit 5cut 48

T2

T2

Unit 6make 48

Unit 4 Unit 5

T1B

T2C

Block Onemake 12

Unit 2

Unit 6

Unit 6

Unit 6 Unit 6

Unit 3 Unit 3

Unit 3 Unit 3

Unit 7make 20

T5I

T7G

T8H

5. Sew (1) F 2-1/2” x WOF strip and (1) E 2-1/2” x WOF strip together lengthwise to make (1) FE strip set (Fig. 7). Repeat to make (4) FE strip sets total.

6. Cut (48) Template 1 triangles from the (4) FE strip sets to make (48) Unit 4 triangles (Fig. 8).

7. Sew (1) F 2-1/2” x WOF strip and (1) D 2-1/2” x WOF strip together lengthwise to make (1) FD strip set (Fig. 9). Repeat to make (4) FD strip sets total.

8. Cut (48) Template 2 triangles from the (4) FD strip sets to make (48) Unit 5 triangles (Fig. 10).

10. Sew (1) Unit 3 square to each side of (1) Unit 6 square to make the top row. Repeat to make the bottom row. Sew (1) Unit 6 square to each side of (1) Unit 2 square to make the middle row. Sew the (3) rows together to make (1) Block One square (Fig. 12). Repeat to make (12) Block One squares total.

9. Sew (1) Unit 4 triangle, (1) B Template 1 triangle, (1) C Template 2 triangle and (1) Unit 5 triangle together as shown in Figure 11 to make (1) Unit 6 square. Trim unit to measure 4-1/2” square. Repeat to make (48) Unit 6 squares total.

11. Place (1) G Template 7 triangle on top of (1) H Template 8 triangle, right sides together, aligning the left sides (Fig. 13). Sew the (2) triangles together along the left side. Press the smaller triangle open.

12. Place (1) I Template 5 triangle on top of the H Template 8 triangle, right sides together, aligning the right sides (Fig. 14). Sew the (2) triangles together along the right side. Press the smaller triangle open to make (1) Unit 7 square(Fig. 15). Trim the unit to measure 5-1/2” square.

13. Repeat Steps 11-12 to make (20) Unit 7 squares total.

Fig. 8Fig. 7 Fig. 9 Fig. 10

Compass Point

4

windhamfabrics.com

Unit 8make 20

T5G

T7I

T8H

Unit 9make 4

T5I

T7I

T6G

Quilt Top Assembly (Refer to the Quilt Diagram while assembling the quilt top.)15. Sew (2) Block One squares together. Repeat to make a second strip. Sew (1) strip to each side of the Center Block.

16. Sew (4) Block One squares together. Repeat to make a second strip. Sew the strips to the top and to the bottom of the Center Block.

17. Sew (1) B 1-1/2” x 48-1/2” strip to each side of the Center Block. Sew (1) B 1-1/2” x 50-1/2” strip to the top and to the bottom of the Center Block.

18. Sew (5) Unit 8 squares and (5) Unit 7 squares together, alternating them. Repeat to make a second strip. Sew (1) strip to each side of the Center Block.

19. Sew (5) Unit 7 squares and (5) Unit 8 squares together. Sew (1) Unit 9 square to each end of the sewn strip. Repeat to make a second strip. Sew the strips to the top and to the bottom of the Center Block to make the quilt top.

Finishing20. Layer and quilt as desired.

21. Sew the (6) B 2-1/2” x WOF strips together end-to-end with 45-degree seams to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

22. Bind as desired.

14. Repeat Steps 11-12 and refer to Figures 16-17 for component identification, placement and orientation to make (20) 5-1/2” Unit 8 squares and (4) 5-1/2” Unit 9 squares.

Fig. 16 Fig. 17

Compass Point

5

windhamfabrics.com

SIZE: 60” X 60”Quilt Diagram

Center Block

B

BB

B

Unit 9

Unit 9 Unit 9

Unit 9

Uni

t 7U

nit 8

Uni

t 7U

nit 8

Uni

t 7U

nit 8

Uni

t 7U

nit 8

Uni

t 7U

nit 8

Unit 7

Unit 7

Unit 8 Unit 7 Unit 8 Unit 7 Unit 8 Unit 7 Unit 8

Unit 8 Unit 7Unit 8 Unit 7Unit 8 Unit 7Unit 8 Unit 7Unit 8

Unit 7 Unit 8

Unit 7

Unit 8

Unit 7

Unit 8

Unit 7

Unit 8

Unit 7

Unit 8

Unit 7

Unit 8

Compass Point

6

windhamfabrics.com

Templates

Align Seamwith line forsewn units

Align Seamwith line forsewn units

Template 1 Template 2

Tem

plat

e 3

Tem

plat

e 4

1” squarefor scale

100% Templates

Compass Point

7

windhamfabrics.com

Templates

1” squarefor scale

100% Templates

Template 7

Template 6

Template 5

Compass Point

8

windhamfabrics.com

Templates

1” squarefor scale

100% Templates

Template 8