Embed Size (px)
Citation preview
C & C Fabrication
Capability Overview
Eddie Carter
CEO/Owner
Phone: (256) 881-7300 x 217
30 Fabrication Dr.
Lacey's Spring, AL. 35754
Justin Carter
COO/Owner
Phone: (256) 881-7300 x 216
Corporate Overview
Over the past 40 years, C&C Fabrication has built a reputation for its precision and versatility in metal fabrication.
The secret to C & C's on-going success lies in the company's unique combination of state-of-the-art equipment, leading-edge technology, experienced personnel, and central location to all types of transportation.
Corporate Overview
Founded in 1969, by Ray Carter and C.M. Carter who brought years of experience in the metal fabrication industry.
C&C employs over 65 highly trained personnel.
100,000 square foot facility spread across 7 buildings.
C&C has extensive experience with Government products
Sales exceeding $6M annually.
Capabilities Overview
Specialization in precision sheet metal parts, chassis, enclosures, electronic or electro-mechanical assemblies, silk screening services or other metal fabrication.
Welders are certified to MILW-45025. ◦ Heli-arc and mig welding equipment
◦ Aluminum and Steel spot welding 1/8 to 3/16 for spot welding aluminum
Capabilities Overview
• 40 Station Turret Punch Press
• 300 hits per minute on 1 inch center punches
• Hole to hole tolerance can be held to +- .003”
Capabilities Overview
• Amada Press Brakes
• Tolerances can be consistently repeated to +- .010” from bend to hole locations and +-.050” from hole to hole dimensions
Capabilities Overview
• HAAS and FADAL CNC Machining and Turning Centers
•6 CNC Mills•4 CNC Lathes•Wire EDM
• Our experienced machinists can create a variety of parts from very small in size and large parts that can be accommodated in our VF-6 HAAS Mill and our ST40 Turning Center
Capabilities Overview
OMAX JetMachining Centers
• Large scale precision machining: For larger parts or multiple parts from large stock up to 5' x 10' (1.5m x 3m). Our JetMachining Centers cut complex flat parts out of most materials including metal, plastic, glass, ceramics, stone and composites directly from a CAD drawing or DXF file.
• Extremely hard, reflective and nonconductive materials can also be cut, making it a valuable addition to existing shop capabilities. No tool changes or complex fixturing dramatically reduces setup times and the smooth finish often eliminates the need for secondary machining.
Capabilities Overview
Coating◦ Alodine (gold and clear)
◦ Wet Paint CARC
Polyurethane
◦ Powder Coat high gloss or matte finish
800 linear feet of rail in automated powder coat line
Capabilities Overview
Quality Control – AS9100 CURRENTLY IN PROCESS◦ Quality control inspectors check the first piece of every production run
against its drawing, specifications and process requirements. After approval, random samples are inspected during production to ensure appropriate quality standards.
◦ C&C's inspection procedures meet all industry and government standards, including MIL-I-45208A.
◦ C&C's policy requires all parts to be processed through final inspection and reports throughout production are complied and provided according to a customer's requirements.
◦ C&C's mechanical inspectors use the most advanced tools available. Calibration equipment meets MIL-STD-45662.
◦ For detailed machined parts, C&C’s Quality Inspectors have a CMM that is certified to ± .001.
◦ C&C is currently in process to achieve our AS9100 Certification with completion set for Fall of 2014
C & C Fabrication
Contact Information
Eddie Carter
CEO/Owner
Phone: (256) 881-7300 x 217
30 Fabrication Dr.
Lacey's Spring, AL. 35754
Justin Carter
COO/Owner
Phone: (256) 881-7300 x 216
