Bussmann Full Line Catalog # 1007 - Disconnect …See data sheet 9000 for CUBEFuse specifications. **For fuse performance under or above 25ºC, consult fuse performance derating charts

379

DisconnectSw

itches

Compact Circuit Protector (CCP) disconnect switches

30A Class CC, Midget & 10x38 .............................380-381

30A 60A and 100A Class CF .................................382-383

CCPB - Compact Circuit Protector Base ..............384-385

UL 98 fused disconnect switches 30 to 800A

Introduction & Agency Information................................386

Product Line Summary..................................................387

30A Compact Class CC & Class J ........................388-389

30A Class J ............................................................390-391

60A Compact Class J ............................................392-393

60A Class J ............................................................394-395

100A Class J ..........................................................396-397

200A & 400A Class J .............................................398-400

600A Class J and 800A Class L ............................402-403

UL 98 non-fused disconnect switches 30 to 1200A



30A, 60A and 100A Compact ................................406-407

100A, 200A and 400A Standard ............................408-409

600A, 800A, 1000A and 1200A Standard..............410-411

UL 508 non-fused disconnect switches 16 to 80A

Introduction and Agency Information............................412


16A, 25A, 40A, 63A and 80A Standard .................414-416

Enclosed UL 98 & UL 508 disconnect switches


Fused UL 9830A to 800A Enclosed Disconnects ......................418-419

Non-Fused UL 9830 to 1200A Enclosed Disconnects.......................420-421

Non-Fused UL 50816 to 80A Enclosed Disconnects...........................422-423

Fused, dead front disconnect switches .................424

Disconnect Switches

Section ContentsPage

Scan this tag to get thelatest product information for the

New Family of Disconnect Switchesand Accessories.

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com

Disconnect Switches

Visit us on the web at www.cooperbussmann.com/Disconnects380

SwitchMax Horsepower Rating

Amp Fuse Number 120 240 480 600 Wire PartRating Class of Poles Volts SCCR Vac Vac Vac Vac Wire Size Type* Number

30 CC 1 600Vac 200kA 0.5 — — — 75°C Cu CCP-1-30CC

30 CC 2 600Vac 200kA — 2 — — Single/Dual 75°C Cu CCP-2-30CC#18-6 Sol/Str

30 CC 3 600Vac 200kA — 3 4 7.5 75°C Cu CCP-3-30CC

30 UL Midget 1 240Vac† 10kA†— — — — Single 75°C Cu CCP-1-30M

32** 10x38 IEC 400Vac† 120kA† #4 Sol/Str30 UL Midget 2 240Vac† 10kA†

— — — — 75°C Cu CCP-2-30M32** 10x38 IEC 400Vac† 120kA†

30 UL Midget 3 240Vac† 10kA†— — — — 75°C Cu CCP-3-30M

32** 10x38 IEC 400Vac† 120kA† Spade30 CC 1 80Vdc† 20kA† — — — — Terminal†† 75°C Cu CCP-1-30DCC30 CC 1 80Vdc† 10kA† — — — — 75°C Cu CCP-1-30DCM32** 10x38 IEC

* 75°C or higher.** 32A Class aM, 25A Class gG.† SCCR May be lower, refer to installed fuse data sheets.

†† Spade terminal, 30A max, insulated flange, wire size #12-10 for #8 stud.SpecificationsAgency Information• CE Compliant• RoHS Compliant• For Class CC fuse version- UL 98 Listed, File E302370, Guide WHTY- cULus to CSA Standard 22.2 No. 4-04, File 302370,

Guide WHTY7• For UL Midget and 10X38 IEC fuse version- UL 508 Listed, File E161278, Guide 8R29- cULus Certified 22.2 No. 14-05- IEC 60947-3 AC23A- IEC 60947-3 DC23A

Terminals• Single/dual conductor box lug or spade terminal suitable

for line, load or accessory connection• Torque: - #18-10 20Lb-In

- #8-4 35Lb-InStorage and Operating Temperature• -20ºC to 75ºC** For fuse performance under or above 25ºC, consult fuse performance derating charts

in the Bussmann publication titled Selecting Protective Devices (SPD), reorder #3002.

Flammability Rating UL 94V0Lockout/Tagout Provisions• 4mm shank lock or standard pin-out devices

Mounting• 35mm DIN-Rail

Local Open Fuse Indication Minimum Voltage**• 90Vac for AC versions• 12Vdc for DC versions** Circuit must be closed for indication light to illuminate.

Features• IP20 Finger-safe construction with #10 or larger wire• Switch interlock prohibits removing the fuse under load

Accessories• Auxiliary contacts• PLC Wired remote fuse indication

Switch Handle

Padlock Provision

Open Fuse Indication Light

Fuse HolderKnob

Spade Terminal

Circuit MarkingArea

Box LugTerminal

Compact Circuit Protector (CCP) Disconnect Switch—30A1-, 2- & 3-Pole, Class CC, UL Midget & 10x38mm IEC

Available Bussmann FusesClass Type Data Sheet #CC LP-CC Time-Delay, Current Limiting 1023CC FNQ-R Time-Delay 1014CC KTK-R Fast-Acting 1015M FNM Time-Delay 2028M FNQ Time-Delay 1012M KTK Fast-Acting 1011M BAF Fast-Acting 2011M KLM Fast-Acting 600Vac/dc 2020Data Sheet: 1157


Disconnect Switches

Compact Circuit Protector (CCP) Disconnect Switch—30A1-, 2- & 3-Pole, Class CC, UL Midget & 10x38mm IEC

Visit us on the web at www.cooperbussmann.com/Disconnects 381

DisconnectSw

itches

CCP-_-30_ AccessoriesMinimum

Signal Circuit Agency PartDescription Configuration Output Voltage Information Number

Auxiliary Contacts NO+NC UL 98 Recognized,

for Switch Status 1 per CCP 5A/240Vac – cURus 22.2 No. 4-04, CCP-AUX*IEC 60947-5-1 AC15

Wired Remote Fuse Indication 1 per CCP 24Vdc 100Vac UL 98 Recognized, CCP-PLC-IND*for PLC Applications cURus 22.2 No. 4-04

* Refer to Data Sheet # 1157 for details.

Dimensions – mm (in)Class CC, UL Midget & I0x38 IEC

92.7(3.7)

17.5(0.7)

45(1.8)

35(1.4)

79.8

(3.1

)

52.5(2.1)

49.2

(1.9

)

Auxiliary Contacts PLC Indicator(Includes leads with spade terminals)


Disconnect Switches


Compact Circuit Protector (CCP) Disconnect Switch—30, 60 & 100A1-, 2- & 3-Pole, Class CF CUBEFuse™


Amp Fuse Number 120 240 480 600 Wire PartRating Class of Poles Volts SCCR Vac Vac Vac Vac Wire Size Type* Number

30 CF 1 600Vac 200kA 1.5 — — — 75°C Cu CCP-1-30CF125Vdc

30 CF 2 600Vac 200kA — 3 — — Single/Dual 75°C Cu CCP-2-30CF125Vdc #18-6 Sol/Str

30 CF 3 600Vac 200kA — 5 15 10 75°C Cu CCP-3-30CF125Vdc Single

60 CF 1 600Vac 200kA 3 — — — #4 Sol/Str 75°C Cu CCP-1-60CF125Vdc

60 CF 2 600Vac 200kA — 7.5 — — Spade 75°C Cu CCP-2-60CF125Vdc Terminal**

60 CF 3 600Vac 200kA — 7.5 20 10 75°C Cu CCP-3-60CF125Vdc

100 CF 1 600Vac 200kA 5 — — — Single 75°C Cu CCP-1-100CF#8-10 Sol/Str

100 CF 2 600Vac 200kA — 10 — — #8-1 Str 75°C Cu CCP-2-100CFDual #6 Str

100 CF 3 600Vac 200kA — 20 50 50 Spade 75°C Cu CCP-3-100CFTerminal**

* 75°C or higher.** Spade terminal, 30A max, insulated flange, wire size #12-10 for #8 stud.

SpecificationsAgency Information• CE Compliant• RoHS Compliant• UL 98 Listed, File E302370, Guide WHTY• cULus to CSA Standard 22.2 No. 4-04, File 302370,

Guide WHTY7Terminals• Single/dual conductor box lug or spade terminal suitable

for line, load or accessory connection• Torque: 0-60A: - #18-10 20Lb-In

- #8-4 35Lb-In70-100A: - #18-10 Single 25Lb-In

- #8-2 Single 35Lb-In- #1 Single 40Lb-In- #6 Dual 45Lb-In

Fuses• Uses finger-safe Class CF CUBEFuse™ with

Class J performance- Low-Peak™ dual-element, time-delay*

- Non-indicating 1-100A- Indicating 6-100A

- Fast-Acting** 1-100A* See Data Sheet # 9000

** See Data sheet # 2147

Storage and Operating Temperature• -20ºC to 75ºC***

*** For fuse performance under or above 25ºC, consult fuse performance derating chartsin the Bussmann publication titled Selecting Protective Devices (SPD) reorder #3002.

Flammability Rating UL 94V0Lockout/Tagout Provisions• 4mm shank lock or standard pin-out devices

Mounting• 35mm DIN-Rail

Local Open Fuse Indication Minimum Voltage†

• 90Vac/115Vdc† Circuit must be closed for indication light to illuminate.

Features• Ampacity rejecting disconnects will not accept

CUBEFuse amp ratings greater than switch rating• IP20 Finger-safe construction with #10 or larger wire• Switch interlock prohibits removing the fuse under load

Accessories• Auxiliary contacts• PLC Wired remote fuse indication (up to 60A)

CircuitMarking Area

Lockout Provision Switch Handle

Spade Terminal

Box LugTerminal

Open Fuse Indication Light

Fuse Holder

Data Sheet: 1157


Disconnect Switches

Compact Circuit Protector (CCP) Disconnect Switch—30, 60 & 100A1-, 2- & 3-Pole, Class CF CUBEFuse™


DisconnectSw

itches

CCP-_-_CF AccessoriesMinimum

Signal Circuit Agency PartDescription Configuration Output Voltage Information Number

Auxiliary Contacts NO+NC UL 98 Recognized,

for Switch Status up to 60A 1 per CCP 5A/240Vac – cURus 22.2 No. 4-04, CCP-AUX*IEC 60947-5-1 AC15

Auxiliary Contacts NO+NC 1 per CCP 5A/240Vac – UL 98 Recognized, CCP-AUX-100*for Switch Status 70 to 100A CSA C22.2 No. 4Wired Remote Fuse Indication 1 per CCP 24Vdc 100Vac UL 98 Recognized, CCP-PLC-IND*for PLC Applications cURus 22.2 No. 4-04Wired Remote Fuse Indication 1 per CCP 8A/24Vdc 100Vac UL 98 Recognized, CCP-PLC-100*for PLC Applications up to 60A CSA C22.2 No. 4

* Refer to Data Sheet # 1157 for details.

Auxiliary Contacts PLC Indicator(Includes leads with spade terminals)

Dimensions – mm (in)30 and 60 Amp

100 Amp

50.4(2.0)

25.1(1.0)

75.7(3.0)

9.1

(0.4

)

7.6(0.3)

60.3

(2.4

)

113.9(4.5)

49.2

(1.9

)

75.1

(3.0

)

30A

CU

BE

Fuse

83.3

(3.3

)

60A

CU

BE

Fuse

89.1

(3.5

)

79.5(3.0)

147.1(5 8)

50.5(2.0)

25.15(1.0)

91.2

(3.6

)56

.6(2

.2)

100.

0(3

.9)

67.7

(2.7

)


Disconnect Switches


Specifications:

• CCPB Ampacity rejection breaks: 15A, 20A, 30A, 40A,50A, 60A, 70A, 90A and 100A.

• 1-, 2- and 3-Pole versions

• For systems 600Vac (or less)

• Box lug loadside terminal:

• 18-6AWG single & dual rated, solid or stranded – 75°C, Cu only

• 4AWG single – 75°C, Cu only

The revolutionary Bussmann CCPB with CUBEFuse™ isdesigned as a fused branch circuit disconnect with fuseholder for the Bussmann Quik-Spec™ CoordinationPanelboard. The CCPB with CUBEFuse simplifies selectivecoordination and allows for isolation of individual branchcircuit loads for safe work practices.

Agency Information:

UL 98 Listed, File E302370, Guide WHTY

cULus to CSA Standard 22.2 No. 4, File E302370, Guide WHTY7

CE Compliant

Shipping Weight: 2.03 lbs per carton

Carton quantity: 6 poles

Environmental Data

Storage and operating temperature: -20ºC to 75ºC**

Product Features and Benefits

• Uses finger-safe Class CF Low-Peak™ CUBEFuse withcurrent-limiting, time-delay Class J performance*

• High Short-Circuit Current Ratings at 200kA

• Disconnect rated to provide means for load isolation

• Full voltage rated at 600Vac

• UL 98 Listed and suitable for branch circuit disconnectand branch circuit protection

• 1-, 2- and 3-pole versions are horsepower rated

• Patented rejection feature helps prevent overfusing

• Complies with UL and cULus

• Open fuse indication light per pole

• Additional open fuse indication can be provided by usingthe indicating CUBEFuse version

• Built-in switch/fuse interlock prohibits removing the fusewhile energized

• Permanent lockout/tagout provisions

• Lock-ON provision

*See data sheet 9000 for CUBEFuse specifications.**For fuse performance under or above 25ºC, consult fuse performance

derating charts.

• Box lug loadside terminal torque: 18-10AWG 20 Lb-In (2.2 N•m), 8-4AWG 35 Lb-In (3.9 N•m)

• Spade terminal load connection: Max. 30A suitable for use with #8-32UNC screw

• Bolt-on style bus connector, #10-32-UNC Hex flange Phillips screw, torque to 25 Lb-In (2.8N•m)

• Lockout/tagout: 4mm shank lock

• Bolt-mounted design into Quik-Spec Coordination Panelboard bus

• Local indication: illumination requires closed circuit and minimum 90Vac operating voltage

• RoHS compliant

Compact Circuit Protector Base (CCPB)CUBEFuse™



Compact Circuit Protector Base (CCPB)CUBEFuse™

CCPB Part Poles Voltage Time-Delay Time-Delay Fast-Acting Max. Fuse** SCCR Hp Ratings*** Numbers Rating Non-Indicating Indicating* Non-Indicating Ampacity CCPB-1-15CF 1 0.5Hp@120V CCPB-2-15CF 2 TCF1RN, TCF3RN,

TCF6, TCF10, FCF1RN, FCF3RN, 1.5Hp@240V

600Vac TCF6RN, TCF10RN, TCF15

FCF6RN, FCF10RN, 15A 200kA 3Hp@240V CCPB-3-15CF 3 TCF15RN FCF15RN 5Hp@480V 7.5Hp@600V CCPB-1-20CF 1 0.75Hp@120V CCPB-2-20CF 2 2Hp@240V 600Vac TCF17-1/2RN, TCF17-1/2, FCF20RN 20A 200kA 3Hp@240V CCPB-3-20CF 3 TCF20RN TCF20 7.5Hp@480V 10Hp@600V CCPB-1-30CF 1 1.5Hp@120V CCPB-2-30CF 2 3Hp@240V 600Vac TCF25RN, TCF25, TCF30 FCF25RN, 30A 200kA 5Hp@240V CCPB-3-30CF 3 TCF30RN FCF30RN 15Hp@480V 10Hp@600V CCPB-1-40CF 1 2.0Hp@120V CCPB-2-40CF 2 3Hp@240V 600Vac TCF35RN, TCF35, TCF40 FCF35RN, 40A 200kA 7.5Hp@240V CCPB-3-40CF 3 TCF40RN FCF40RN 20Hp@480V 10Hp@600V CCPB-1-50CF 1 3.0Hp@120V CCPB-2-50CF 2 5Hp@240V 600Vac TCF45RN, TCF45, TCF50 FCF45RN, 50A 200kA 7.5Hp@240V CCPB-3-50CF 3 TCF50RN FCF50RN 20Hp@480V 10Hp@600V CCPB-1-60CF 1 3.0Hp@120V CCPB-2-60CF 2 7.5Hp@240V 600Vac TCF60RN TCF60 FCF60RN 60A 200kA 7.5Hp@240V CCPB-3-60CF 3 20Hp@480V 10Hp@600VCCPB-1-70CF 1 3.0Hp@120VCCPB-2-70CF 2 7.5Hp@240V 600Vac TCF70RN TCF70 FCF70RN 70A 200kA 15Hp@240VCCPB-3-70CF 3 30Hp@480VCCPB-1-90CF 1 5.0Hp@120VCCPB-2-90CF 2 FCF80RN, 10Hp@240V 600Vac TCF90RN TCF90 FCF90RN 90A 200kA 20Hp@240VCCPB-3-90CF 3 40Hp@480VCCPB-1-100CF 1 5.0Hp@120VCCPB-2-100CF 2 10Hp@240V 600Vac TCF100RN TCF100 FCF100RN 100A 200kA 20Hp@240VCCPB-3-100CF 3 50Hp@480V

CUBEFuse™(Class J performance)

Technical Ratings

*1A and 3A indicating CUBEFuse not available. Correct fit with CCPB disconnect requires indicating CUBEFuse with date code R38 or later.**Any fuse with an amp rating less than or equal to the max fuse rating may be used.Example: TCF15 may be used with CCPB-1-20CF.***Do not use UPS/Critical Application fast-acting CF with motors.

Disconnect SwitchesDisconnectSw

itches


Disconnect Switches

UL 98 Fused Rotary Disconnect Switches—30 to 800A


Description

Bussmann UL 98 and UL 489 fused disconnect switches“break” and “make” power circuits ON and OFF load.

The switches employ double break contacts per pole thathelp ensure complete isolation of the fuse when the switch isin the "OFF" position.

Features• Make and break power under load• Double break by pole• DIN-Rail or panel mount (30-100A)• Up to 200kA Short-Circuit Current Rating• Finger-safe covers• Compact footprints available• Defeatable handles automatically re-latch when the panel

door is closed• Most disconnect switches are front, right side, flange or

direct handle operable• NFPA 79 Compliant handle kits

Agency Information• UL 98, Guide WHTY, File E155130• UL 489, Guide WJAZ, File E359801• CSA 22.2 No. 4, File 257020• Conforms with IEC 60947-3• NFPA 79 (2002 Edition)

Online Resources

Visit www.cooperbussmann.com/Disconnects for:• CAD Drawings• Instruction Sheets• UL Information

Available Bussmann FusesClass Type Data Sheet #

CC LP-CC Time-Delay, Current Limiting 1023CC FNQ-R Time-Delay 1014CC KTK-R Fast-Acting 1015J LPJ Time-Delay, Current Limiting 1006 (0-60A)J 1007 (70-600A)J With easyID™ open fuse indication 1062 (6-60A)J 1063 (70-600A)J JKS Fast-Acting Fuses 1026 (0-60A)J 1027 (70-600A)J DFJ High Speed Drive Fuse 1048 (0-600A)L KRP-C Time-Delay, Current Limiting 1008L KTU Fast-Acting 1010L KLU Time-Delay 1013

QuikShip Everyday Service ships the most common part numbers within 24 hours. Contact your Bussmann representative for details.


Disconnect Switches

UL 98 Fused Rotary Disconnect Switches—30 to 800A


DisconnectSw

itches

Part Number2-Pole — — RDF30J-2 RDF60J-2-COMP RDF60J-2 RDF100J-2 RDF200J-2 RDF400J-2 RDF600J-2 RDF800L-23-Pole RDF30CC-3 RDF30J-3-COMP RDF30J-3 RDF60J-3-COMP RDF60J-3 RDF100J-3 RDF200J-3 RDF400J-3 RDF600J-3 RDF800L-33-Pole + Neutral RDF30CC-3N RDF30J-3N-COMP — — — — — — — —4-Pole — — RDF30J-4 RDF60J-4-COMP RDF60J-4 RDF100J-4 RDF200J-4 RDF400J-4 RDF600J-4 RDF800L-4UL Standard UL 489 UL 489 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98Fuse Class CC J J J J J J J J LMax Fuse/Ampacity 30 30 30 60 60 100 200 400 600 800Switch Type Compact Compact Standard Compact Standard Standard Standard Standard Standard StandardHandle Operation Front Front Front/Side Front/Side Front/Side Front/Side Front/Side Front/Side Front Front

Flange Flange Flange Flange FlangeUL Electrical RatingsMax AC Volts 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac 600VacMax DC Volts* — — 250Vdc 250Vdc 250Vdc 250Vdc — 250Vdc 600Vdc 600VdcStd AC Horsepower Ratings

1-Phase, 240Vac — — 3 10 10 10 10 10 — —3-Phase, 240Vac 3 3 3 7.5 7.5 15 25 50 75 753-Phase, 480Vac 5.0 5.0 5.0 15 15 25 50 100 150 2003-Phase, 600Vac 7.5 7.5 7.5 15 15 30 60 125 200 250

Max AC Horsepower Ratings3-Phase, 240Vac 7.5 7.5 7.5 15 15 30 60 125 200 2003-Phase, 480Vac 15 15 15 30 30 60 125 250 400 5003-Phase, 600Vac 20 20 20 50 50 75 150 350 500 500

DC Horsepower Ratings125Vdc — — 3 5 5 7.5 — 20 — —250Vdc — — 5 10 10 20 — 50 — —

Electrical CharacteristicsSCCR 100kA 100kA 200kA 100kA 200kA 200kA 200kA 200kA 200kA 200kATerminal Lugs/Kits Integral Integral Integral Integral Integral Integral • • • •

Mounting Torque - Lb-In (N•m) — — — — — — 160 (18) 310 (35) 310 (35) 310 (35)Wire Type 75°C Cu 75°C Cu 75°C Cu 75°C Cu 75°C Cu 75°C Cu 75°C Cu/Al 75°C Cu/Al 75°C Cu/Al 75°C Cu/AlWire Range & Torque - Lb-In (N•m)

Solid #14-10 #14-10 #14-10 #14-10 #12-10 #12-10 — — — —27 (3.1) 27 (3.1) 31 (3.5) 31 (3.5) 35.4 (4) 35.4 (4) — — — —

Stranded #14-10 #14-10 #14-6 #14-6 #12-1 #12-1 #6-300MCM #4-600MCM (2) #2-600MCM (2) #2-600MCM27 (3.1) 27 (3.1) 31 (3.5) 31 (3.5) 35.4 (4) 35.4 (4) 275 (31) 550 (62) 375 (42.4) 375 (42.4)

Dual 1/0-250MCM 550 (62)

Mechanical CharacteristicsEndurances/Cycles 10,000 10,000 10,000 10,000 10,000 10,000 8000 6000 5000 5000

Physical CharacteristicsDimensions

See drawings onproduct pages

Weight - Lbs (KG)2-Pole — — 3.0 (1.3) 3.1 (1.4) 4.0 (1.8) 4.07 (1.8) 5.7 (2.6) 11.4 (5.2) 31.7 (14.4) 31.7 (14.4)3-Pole 1.3 (0.6) 1.4 (0.6) 3.8 (1.7) 4.1 (1.8) 5.3 (2.4) 5.3 (2.4) 7.8 (3.5) 16.6 (7.6) 44.2 (20.1) 44.2 (20.1)3-Pole + Neutral 1.4 (0.6) 1.5 (0.7) — — — — — — — —4-Pole — — 4.7 (2.1) 4.8 (2.2) X.X (2.9) 6.49 (2.9) 10.8 (4.9) 21.8 (9.9) 56.8 (25.8) 56.8 (25.8)

EnvironmentalOperating Temp. Range -20°C to 70°C -20°C to 70°C -20°C to 70°C -20°C to 70°C -20°C to 70°C -20°C to 70°C -20°C to 70°C -20°C to 70°C -20°C to 70°C -20°C to 70°CFlammability Rating UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0

AccessoriesLug Kit Integral Integral Integral Integral Integral Integral • • • •Handles Direct • • • • • • • • • •

Front Selector • • — — — — — — — —Front Pistol • • • • • • • • • •Side Pistol — — • • • • • • — —

FlangeCable — — • • • • • — — —Shaft — — • • • • • — — —

NFPA Through Door Handle • • • • • • • • • •Shafts c/s - mm 5x5 5x5 10x10 10x10 10x10 10x10 10x10 10x10 12X12 12X12Terminal Shrouds Not Required Not Required Not Required Not Required Not Required Not Required • • • •Auxiliary Contacts

(1) NO • • • • • • • • • •(1) NC • • • • • • • • • •AC Ratings

Volts 600 600 600 600 600 600 600 600 600 600Amps 10 10 10 10 10 10 10 10 10 10

• Available, see product page for details and part numbers.— Not available.

* General purpose only, not photovoltaic rated.

Specifications

RDF30CC-3 RDF60J-3 RDF200J-3 RDF600J-3RDF30J-3 / RDF60J-3-COMP


External Front Operated Pistol Handles - shaft requiredNEMA Test PartType Color Function Padlockable Defeatable Number1, 3R, 12 Black N Y Y H12-05B1, 3R, 12 Red/Yellow N Y Y H12-05R1, 3R, 4, 4X, 12 Black N Y Y H4X-05B1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-05R1, 3R, 4, 4X, 12 Black Y Y Y H4X-05TB1, 3R, 4, 4X, 12 Red/Yellow Y Y Y H4X-05TR

Metallic Hasp (Heavy Duty) External Front Operated Pistol Handles - shaft requiredNEMA Test PartType Color Function Padlockable Defeatable Number1, 3R, 4, 4X, 12 Black N Y Y H4X-05BHD1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-05RHD

Shafts for Pistol HandlesLength Mounting Depth Partin (mm) (X) in (mm) Number7.9 (200) 4.02~9.65 (102~245) SH2-20012.6 (320) 4.02~14.37 (102~365) SH2-32015.7 (400) 4.02~17.52 (102~445) SH2-400

Disconnect Switches

UL 98 Fused Rotary Disconnect Switches—30ACompact Class CC & Class J


(1)

(2)

For a Complete Assembly, Please Select:

Sel

ect

for

Sta

nd

ard

Ap

plic

atio

ns

Acc

esso

ries

SwitchMax Horsepower Rating, 3-Ph

Amp Fuse Number 220/ 440/ 600 Wire Wire PartRating Class of Poles SCCR 240Vac 480Vac Vac Size Type Number30 CC 3 100kA 7.5 15 20 #14-10 Sol/Str 75°C Cu RDF30CC-330 CC 3 + Ntrl* 100kA 7.5 15 20 #14-10 Sol/Str 75°C Cu RDF30CC-3N30 J 3 100kA 7.5 15 20 #14-10 Sol/Str 75°C Cu RDF30J-3-COMP30 J 3 + Ntrl* 100kA 7.5 15 20 #14-10 Sol/Str 75°C Cu RDF30J-3N-COMP* Neutral is switched.

Direct Mount Handle - mounts directly to switch, no shaft requiredFor Switch Test PartPart Number Color Function Padlockable NumberRDF30CC-_ Black Y Y DIR-05RDF30J-_-COMP Black Y Y DIR-06

External Front Operated Selector Handle - shaft requiredNEMA Test PartType Color Function Padlockable Defeatable Number1, 3R, 4, 4X, 12 Black N Y Y H4X-04B1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-04R

Shafts for Selector HandlesLength Mounting Depth Partin (mm) (X) in (mm) Number7.9 (200) 4.02~9.65 (102~245) SH1-20012.6 (320) 4.02~14.37 (102~365) SH1-32015.7 (400) 4.02~17.52 (102~445) SH1-400

NFPA Through the Door Handle Kit - to be used with selector handle or front pistol handleTest Part

Color Function Padlockable Defeatable NumberRed N Y N H79-1

Auxillary ContactsContact Number of Continuous Voltage Maximum Number of Auxiliary Contacts PartType Contacts Amp Rating Rating per Disconnect Switch Part Number NumberNO 1 10A 600Vac RDF30CC-_: 4 / 8 with BAC-HOLDER2 BAC05(1)

NC 1 10A 600Vac RDF30J-_-COMP: 2 /6 with BAC-HOLDER2 BAC06(1)

Auxillary Accepts 4 Auxillary Contacts:Contact BAC05 or BAC06 BAC-HOLDER2(2)

Holder

or

or

or

or

SW

ITC

HA

UX

ILIA

RY

CO

NTA

CTS

HA

ND

LE

X

X

+

+

and…

+


Disconnect Switches

UL 98 Fused Rotary Disconnect Switches—30ACompact Class CC & Class J


DisconnectSw

itches

3.2883.3 1.12

28.5

5.19 (131.8)

4.56 116

3.3

84

125

.5

3.7896 1.47

37.50.5915

Fuse Cover Fully Open

3.8999

1.1228.5

4.13105

1.4737.5

0.5915

4.56 116

3.3

84

125

.5

Dimensions – in (mm)• RDF30CC-_

•RDF30J-_-COMP

External Front Pistol Handles

External Front Selector Handle

Door Drilling Layout

0.78

4 Ø 0.27

0.55

Ø 1.46

4 Ø 7Ø 37

2020

140.5514

0.78

H4X-05__H12-05__

Ø3.07

1.73

2.75

65°

TEST

90°

0

Direction of Front OperationPistol Handle Type

Ø78

70

44

I

Ø78

37

88 13.5

Ø 22.5

3

40

4 Ø 7

Ø 31

28

With Mounting NutWith 4 Mounting Screws

Door Drilling LayoutSelector Handle Type

0

I

90°

Direction of Front Operation

Ø3.07

1.45

3.46

1.57

4 Ø 0.27

1.10

Ø 1.22

0.11

0.53

Ø 0.88H4X-04_


Disconnect Switches

UL 98 Fused Rotary Disconnect Switches—30AStandard Class J





Sel

ect

for

Sta

nd

ard

Ap

plic

atio

ns


1-Phase 3-Phase DC*Amp Fuse No. of 220/ 220/ 440/ 600 125 250 Wire Wire PartRating Class Poles SCCR 240Vac 240Vac 480Vac Vac Vdc Vdc Size Type Number

30 J 2 200kA 3 - - - 3 5 #14-10 Sol 75°C Cu RDF30J-2#14-6 Str

30 J 3 200kA - 7.5 15 20 3 5 #14-10 Sol 75°C Cu RDF30J-3#14-6 Str

30 J 4 200kA - 7.5 15 20 3 5 #14-10 Sol 75°C Cu RDF30J-4#14-6 Str

* DC Ratings use two poles in series.

Direct Mount Handle - mounts directly to switch, no shaft requiredFor Switch Test PartPart Number Color Function Padlockable NumberAll Switches Black Y Y - On Switch DIR-07

+

(1)

(2)

(3)

(4)

or

or

or

SW

ITC

HH

AN

DLE

X

or



External Right Side Operated Pistol Handles - shaft requiredNEMA Test PartType Color Function Padlockable Defeatable Number1, 3R, 4, 4X, 12 Black N Y N/A H4X-05SB1, 3R, 4, 4X, 12 Red/Yellow N Y N/A H4X-05SR


Flange Handle(1) - requires shaft operated mechanism or cable operated mechanism + cableNEMA Flange Test Part Type Style Function Padlockable Defeatable Number1, 3R, 4, 12 Standard N Y Y FLH11, 3R, 4, 4X, 12 Chrome Plated N Y Y FLH2

Shaft Operated Flange Mechanism(2) - includes shaftFor Enclosure PartDepth - in (mm) Number6~24 (152~613) FLRM

Cable Operated Flange Mechanism and Cable - must select Mechanism(3) and Cable(4)

PartItem / Length NumberCable Mechanism FLCM36” (900mm) Cable FLC3660” (1500mm) Cable FLC60120” (3000mm) Cable FLC120

+


Disconnect Switches



DisconnectSw

itches

Acc

.

Auxillary ContactsContact Number of Continuous Voltage Max Number of Aux PartType Contacts Amp Rating Rating Contacts per Switch NumberNO 1 10A 600Vac 4 BAC05NC 1 10A 600Vac 4 BAC06

Dimensions – in (mm)

5.35

136

5.87149.3

1.4136

1.4637.2

4.84123

1.4136

4.02

102.1

2.68

68.07

1.5740

5.31

135

1.7945.5

Direct Mount Handle

DIR-07

3.50(88.9)

2.16(54.9)

0.86(21.8)

1.06(26.9)

4.68(118.9)

1.55 (39.4)

0.88(22.3)

1.00(25.4)

1.00(25.4)6.22

(158.0)

2.32(58.9)7.10

(180.3)

Ø0.50(Ø12.7)

Ø0.28(Ø7.1)

2.70(68.6)

5.66(143.8)

Flange Handle

FLH_

External Front & Right Side Pistol Handle

H4X-05__H12-05__

0

I

90°Ø3.07

1.73

2.75

65°

TEST

90°

0

Direction of Front OperationHandle Type Direction of Right Side Operation Door Drilling Layout

Ø78

70

44

0.78

4 Ø 0.27

0.55

Ø 1.46

4 Ø 7Ø 37

2020

140.5514

0.78

I

and …

AU

XC

ON

TAC

TS


Disconnect Switches

UL 98 Fused Rotary Disconnect Switches—60ACompact Class J





Sel

ect

for

Sta

nd

ard

Ap

plic

atio

ns


1-Phase 3-Phase DC*Amp Fuse Number 220/ 220/ 440/ 600 125 250 Wire Wire PartRating Class of Poles SCCR 240Vac 240Vac 480Vac Vac Vdc Vdc Size Type Number

60 J 2 100kA 10 - - - 5 10 #14-10 Sol 75°C Cu RDF60J-2-COMP#14-6 Str

60 J 3 100kA - 15 30 50 5 10 #14-10 Sol 75°C Cu RDF60J-3-COMP#14-6 Str

60 J 4 100kA - 15 30 50 5 10 #14-10 Sol 75°C Cu RDF60J-4-COMP#14-6 Str


Direct Mount Handle - mounts directly to switch, no shaft requiredFor Switch Test PartPart Number Color Function Padlockable NumberAll Switches Black Y Y - On Switch DIR-07





Flange Handle(1) - requires shaft operated mechanism or cable operated mechanism + cableNEMA Flange Test PartType Style Function Padlockable Defeatable Number1, 3R, 4, 12 Standard N Y Y FLH11, 3R, 4, 4X, 12 Chrome Plated N Y Y FLH2

Shaft Operated Flange Mechanism(2)- includes shaftFor Enclosure PartDepth - in (mm) Number6~24 (152~613) FLRM



+

(1)

(2)

(3)

(4)

SW

ITC

HH

AN

DLE

X

or

or

or

or

+


Disconnect Switches

UL 98 Fused Rotary Disconnect Switches—60ACompact Class J


DisconnectSw

itches


5.35

136

5.87149.3

1.4136

1.4637.2

4.84123

1.4136

4.02

102.1

2.68

68.07

1.5740

5.31

135

1.7945.5

Direct Mount Handle

DIR-07


H4X-05__H12-05__

0

I

90°Ø3.07

1.73

2.75

65°

TEST

90°

0


Ø78

70

44

0.78

4 Ø 0.27

0.55

Ø 1.46

4 Ø 7Ø 37

2020

140.5514

0.78

I

3.50(88.9)

2.16(54.9)

0.86(21.8)

1.06(26.9)

4.68(118.9)

1.55 (39.4)

0.88(22.3)

1.00(25.4)

1.00(25.4)6.22

(158.0)

2.32(58.9)7.10

(180.3)

Ø0.50(Ø12.7)

Ø0.28(Ø7.1)

2.70(68.6)

5.66(143.8)

Flange Handle

FLH_

Acc

.


and …

AU

XC

ON

TAC

TS


Disconnect Switches




Sel

ect

for

Sta

nd

ard

Ap

plic

atio

ns



60 J 2 200kA 10 - - - 5 10 #12-10 Sol 75°C Cu RDF60J-2#12-1 Str

60 J 3 200kA - 15 30 50 5 10 #12-10 Sol 75°C Cu RDF60J-3#12-1 Str

60 J 4 200kA - 15 30 50 5 10 #12-10 Sol 75°C Cu RDF60J-4#12-1 Str


Direct Mount Handle - mounts directly to switch, no shaft requiredFor Switch Test PartPart Number Color Function Padlockable NumberAll Switches Black Y Y DIR-07






Shaft Operated Flange Mechanism(2) - includes shaftFor Enclosure Depth Partin (mm) Number6~24 (152~613) FLRM



+

or

(1)

(2)

(3)

(4)

X

SW

ITC

HH

AN

DLE

or

or

+


Disconnect Switches



DisconnectSw

itches

NFPA Through the Door Handle Kit - to be used with front pistol handleTest Part



7.32

186

5.87149.3

1.4136

1.4637.2

4.81122.21.41

36

6.77

172

5.23

133

3.66

92.9

6

1.5740

5.31

135

1.7945.5

Direct Mount Handle

DIR-07

External Front and Right Side Pistol Handle

H4X-06__H12-03__

0

I

90°

65°

TEST

90°

0

Ø78

1.77

4.92


Ø3.07

0.78

4 Ø 0.27

0.55

Ø 1.46

4 Ø 7Ø 37

2020

140.5514

0.78

45

125

I

3.50(88.9)

2.16(54.9)

0.86(21.8)

1.06(26.9)

4.68(118.9)

1.55 (39.4)

0.88(22.3)

1.00(25.4)

1.00(25.4)6.22

(158.0)

2.32(58.9)7.10

(180.3)

Ø0.50(Ø12.7)

Ø0.28(Ø7.1)

2.70(68.6)

5.66(143.8)

Flange Handle

FLH_

Sel

ect

NFP

A H

AN

DLE

or

Acc

.


and …

AU

XC

ON

TAC

TS


Disconnect Switches




Sel

ect

for

Sta

nd

ard

Ap

plic

atio

ns



100 J 2 200kA 10 - - - 7.5 20 #12-10 Sol 75°C Cu RDF100J-2#12-1 Str

100 J 3 200kA - 30 60 75 7.5 20 #12-10 Sol 75°C Cu RDF100J-3#12-1 Str

100 J 4 200kA - 30 60 75 7.5 20 #12-10 Sol 75°C Cu RDF100J-4#12-1 Str








Shaft Operated Flange Mechanism(2) - includes shaftFor Enclosure Depth Partin (mm) Number6~24 (152~613) FLRM



+

(1)

(2)

(3)

(4)

X

or

SW

ITC

HH

AN

DLE

or

or

+


Disconnect Switches



DisconnectSw

itches

7.32

186

5.87149.3

1.4136

1.4637.2

4.81122.21.41

36

6.77

172

5.23

133

3.66

92.9

6


1.5740

5.31

135

1.7945.5

Direct Mount Handle

DIR-07


H4X-06__H12-03__

0

I

90°

65°

TEST

90°

0

Ø78

1.77

4.92


Ø3.07

0.78

4 Ø 0.27

0.55

Ø 1.46

4 Ø 7Ø 37

2020

140.5514

0.78

45

125

I

3.50(88.9)

2.16(54.9)

0.86(21.8)

1.06(26.9)

4.68(118.9)

1.55 (39.4)

0.88(22.3)

1.00(25.4)

1.00(25.4)6.22

(158.0)

2.32(58.9)7.10

(180.3)

Ø0.50(Ø12.7)

Ø0.28(Ø7.1)

2.70(68.6)

5.66(143.8)

Flange Handle

FLH_

NFPA Through the Door Handle Kit - to be used with front pistol handleTest Part


Sel

ect

NFP

A H

AN

DLE

or

Acc

.

Auxillary ContactsContact Number of Continuous Voltage Max Number of Aux PartType Contacts Amp Rating Rating Contacts per Switch NumberNO 1 10A 600Vac 4 BAC05NC 1 10A 600Vac 4 BAC06A

UX

CO

NTA

CTS

and …


Disconnect Switches

UL 98 Fused Rotary Disconnect Switches—200 & 400AStandard Class J



Sel

ect

for

Sta

nd

ard

Ap

plic

atio

ns


1-Phase 3-Phase DC*Amp Fuse Number 220/ 220/ 440/ 600 125 250 PartRating Class of Poles SCCR 240Vac 240Vac 480Vac Vac Vdc Vdc Number200 J 2 200kA 10 - - - - - RDF200J-2200 J 3 200kA - 60 125 150 - - RDF200J-3200 J 4 200kA - 60 125 150 - - RDF200J-4400 J 2 200kA 10 - - - 20 50 RDF400J-2400 J 3 200kA - 125 250 350 20 50 RDF400J-3400 J 4 200kA - 125 250 350 20 50 RDF400J-4


Terminal Lug KitSwitch Number Lugs PartAmp Rating of Poles Per Kit Wire Range Wire Type Number200 2 2 #6-300MCM 75°C Cu/Al LUG1-2200 3 3 #6-300MCM 75°C Cu/Al LUG1-3200 4 4 #6-300MCM 75°C Cu/Al LUG1-4

400 2 2 #4-600MCM or 75°C Cu/Al LUG2-2Dual 1/0-250MCM







Shafts for Pistol HandlesLength Mounting Depth Partin (mm) (X) in (mm) Number

7.9 (200) 200A: 5.70-9.06 (145-230) SH5-200400A: 7.87-10.24 (200-260)

12.6 (320) 200A: 5.70-13.78 (145-350) SH5-320400A: 7.87-16.93 (200-380)

15.7 (400) 200A: 5.70-16.93 (145-430) SH5-400400A: 7.87-18.10 (200-460)

+

+

X

or

SW

ITC

H+

LU

GS

HA

ND

LE

or

+


Disconnect Switches



DisconnectSw

itches

Sel

ect

for

Sta

nd

ard

Ap

plic

atio

ns

Flange Handle(1) 200A Only - requires shaft operated mechanism or cable operated mechanism + cableNEMA Flange Test PartType Style Function Padlockable Defeatable Number1, 3R, 4, 12 Standard N Y Y FLH11, 3R, 4, 4X, 12 Chrome Plated N Y Y FLH2

Shaft Operated Flange Mechanism(2) 200A Only - includes shaftFor Enclosure Depth Partin (mm) Number6~24 (152~613) FLRM

Cable Operated Flange Mechanism and Cable 200A Only - must select Mechanism(3) and Cable(4)

PartItem NumberCable Mechanism FLCM36” (900mm) Cable FLC3660” (1500mm) Cable FLC60120” (3000mm) Cable FLC120

(1)

(2)

(3)

(4)

NFPA Through the Door Handle Kit - to be used with front pistol handleUse with Test PartSwitch Color Function Padlockable Defeatable NumberRDF200J-_ Red N Y N H79-2RDF400J-_ Red N Y N H79-3

Auxillary ContactsContact Number of Continuous Voltage Max Number of Aux PartType Contacts Amp Rating Rating Contacts per Switch Part Number NumberNO 1 10A 600Vac RDF200J-__: 4 BAC05NC 1 10A 600Vac RDF400J-__: 8 BAC06

Terminal Shrouds - includes terminal shroud for lineside or loadsideSwitch Amp Number PartRating of Poles Number200 2 TSH8-2TB200 3 TSH8-3TB200 4 TSH8-4TB400 2 TSH9-2TB400 3 TSH9-3TB400 4 TSH9-4TB

7.72196.2

6.61168

6.18157

1.4136

5.11130

1.9650

5.28

134.

2

6.50

165.

2

7.67

195

11.4

629

1.3

7.08180

4.37111.1

10.19 (3P) - 12.79 (4P)259 (3P) - 325 (4P)

2.5966

2.5966

3.2683

0.9824.9

2.95

75

2.95

75

9.44

240

15.35

390

7.97

202.5

3.98

101.25

3.98

101.25

Dimensions – in (mm)• RDF200J-3 • RDF400J-3

Acc

esso

ries

AU

XC

ON

TAC

TSS

HR

OU

DS

HA

ND

LE

or

or

and …

and …


Disconnect Switches




H4X-06__H12-03__

0

I

90°

65°

TEST

90°

0

Ø78

1.77

4.92


Ø3.07

0.78

4 Ø 0.27

0.55

Ø 1.46

4 Ø 7Ø 37

2020

140.5514

0.78

45

125

I

1.5740

5.31

135

1.7945.5

Direct Mount Handle

DIR-07

Terminal Lugs

200A

LUG1-__

400A

LUG2-__

1.5238.8

1 251.

1228

.6

0.45Ø11.6

0.4611.68

0.25

6.35

2.871.5

Ø 0.4Ø 4.71.

335

1.8

46 0.44

11.1

3

0.6315.88

3.50(88.9)

2.16(54.9)

0.86(21.8)

1.06(26.9)

4.68(118.9)

1.55 (39.4)

0.88(22.3)

1.00(25.4)

1.00(25.4)6.22

(158.0)

2.32(58.9)7.10

(180.3)

Ø0.50(Ø12.7)

Ø0.28(Ø7.1)

2.70(68.6)

5.66(143.8)

Flange Handle

FLH_


Disconnect Switches


DisconnectSw

itches

Open & Enclosed Rotary Disconnect SwitchesIn-Stock and Ship Within 24 Hours

The Bussmann QuikShip Everyday Serviceensures the most common open andenclosed rotary disconnect switches shipwithin 24 hours to help you meet projecttimelines.

Contact your Bussmann representative fordetails.

www.cooperbussmann.com/Disconnects


Disconnect Switches

UL 98 Fused Rotary Disconnect Switches—600 & 800AStandard Class J & Class L



Sel

ect

for

Sta

nd

ard

Ap

plic

atio

ns

SwitchMax Horsepower Rating, 3-Phase

Amp Fuse Number 220/ 440/ PartRating Class of Poles SCCR 240Vac 480Vac 600Vac Number600 J 2 200kA - - - RDF600J-2600 J 3 200kA 200 400 500 RDF600J-3600 J 4 200kA 200 400 500 RDF600J-4800 L 2 200kA - - - RDF800L-2800 L 3 200kA 200 500 500 RDF800L-3800 L 4 200kA 200 500 500 RDF800L-4

Terminal Lug KitSwitch Number Lugs PartAmp Rating of Poles Per Kit Wire Range Wire Type Number600-800 2 2 (2) #2-600MCM 75°C Cu/Al LUG5-2600-800 3 3 (2) #2-600MCM 75°C Cu/Al LUG5-3600-800 4 4 (2) #2-600MCM 75°C Cu/Al LUG5-4


+

or

+

NFPA Through the Door Handle Kit - to be used with front pistol handleFor Switch Test PartPart Number Color Function Padlockable Defeatable NumberAll Switches Red N Y N H79-4


Terminal Shrouds - includes terminal shroud for lineside or loadsideSwitch Amp Number PartRating of Poles Number600-800 2 TSH10-2TB600-800 3 TSH10-3TB600-800 4 TSH10-4TB

Acc

esso

ries

AU

XC

ON

TAC

TSS

HR

OU

DS

SW

ITC

H+

LU

GS

HA

ND

LE

or

or

External Front Operated Pistol Handles - shaft requiredNEMA Test PartType Color Function Padlockable Defeatable Number1, 3R, 4, 4X, 12 Black N Y Y H4X-07B1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-07R



X

+

and …

and …


Disconnect Switches

UL 98 Fused Rotary Disconnect Switches—600 & 800AStandard Class J & Class L


DisconnectSw

itches

9.84250

6.10155

3.1279.5

0.277

2.3259

14.96380

Fuse Cover Fully Open

min 10.43min 265

Ø 0.51Ø13

0.43

11

11.18 (3P) - 14.88 (4P)

284 (3P) - 378 (4P)

65 342.56 1.34

251

0.359

3.7 3.794

14.33 (3P) - 18.03 (4P)

364 (3P) - 458 (4P)

94

fix 9

.84

fix 2

50

5126.5

11.8

1

18.5

4471

260

10.2

3

300

3.3

685.5

3.3

685.5

70.2

70.2

7 7

11.8

1300

90

3.5

418.58

472

Dimensions – in (mm)• RDF600J-3 • RDF800L-3

External Front Pistol Handle

H4X-07__ 61

210

90°

I

0

Direction of Front OperationHandle Type Door Drilling Layout

Ø3.07Ø78

0.78

4 Ø 0.27

0.55

Ø 1.46

4 Ø 7Ø 37

2020

140.5514

0.78

60

2.36

85

3.35

190

7.48

Direct Mount Handle

DIR-08

Terminal Lugs

600 to 800A

LUG5-__

3.1580

1.49 38

2.87 73

0.40Ø10.2

3.7695.5

0.64

16.2


Disconnect Switches


UL 98 Non-Fused Rotary Disconnect Switches—30 to 1200A

QuikShip Everyday Service ships themost common part numbers within24 hours. Contact your Bussmann representative for details.

Description

Bussmann UL 98 non-fused rotary disconnect switches areversatile switches that “break” and “make” power circuits ONand OFF load.

Features

• Make and break power under load

• Up to 200kA SCCR

• DIN-Rail or panel mount (30-100A)

• Disconnect switches are front, right side and direct handle operable (30-100A)

• Finger-safe (30-100A)

• Fully visualized breaking (100-1200A)

Agency Information

• UL98, Guide WHTY, File E155130

• CSA 22.2 No. 4, File 257020

• Conforms with IEC 60947-3

Online Resources

Visit www.cooperbussmann.com/Disconnects for:

• CAD Drawings

• Instruction Sheets

• UL Information

Related Cooper Bussmann ProductsFuse Blocks Data Sheet #

Modular Knifeblade Fuse Blocks 100-600A 3192

Fuses HoldersCH Series Class CC, Midget & 10x38 0-30A 3185Finger-Safe Optima Series 0-30A 1102Optima™ Protection Modules 0-30A 1109CH Series Class J 0-60A 2144

Part Number3-Pole RD30-3 RD60-3 RD100-3 RD100-3-SCCR RD200-3 RD400-3 RD600-3 RD800-3 RD1000-3 RD1200-34-Pole — — — — RD200-4 RD400-4 RD600-4 RD800-4 RD1000-4 RD1200-4Thermal Current Ith @ 40°C (A) 30 60 100 — — — — — — —Rated insulation voltage Ui (V) 800 800 800 — — — 1000 1000 1000 1000Rated impulse withstand voltage Uimp (kV) 8 8 8 — — — 12 12 12 12

Rated Operation Currents Ie (A)Load Duty Category Rated Voltage A (1) A (1) A (1) — — — A (1) A (1) A (1) A (1)

400Vac AC-22 A 32 63 100 — — — 630 800 1000 1200400Vac AC-23 A 32 63 100 — — — 630 800 1000 1000690Vac AC-22 A 32 63 80 — — — 500 630 630 630690Vac AC-23 A 32 63 63 — — — 200 400 400 400

Operational Power (Vac) in AC-23 (kW)400V w/o prebreak AC (1)(2) 15 30 45 — — — 355 450 560 560500V w/o prebreak AC (1)(2) 15 30 45 — — — 450 560 560 560690V w/o prebreak AC (1)(2) 18.5 30 45 — — — 185 400 400 400

Overload Capacity (Ue 415Vac)Rated short-time making capacity Icm(kA peak) (3) 12 12 12 — — — 48 75 48 75

Fuse Protected Short-Circuit Withstand (kA rms prospective)Short-Circuit Current (kA) (3) 50 50 25 — — — 100 100 100 100Associated Fuse Rating (A) (3) 32 63 100 — — — 630 800 1000 1250

ConnectionMinimum Cu cable cross section (mm2) 2.5 2.5 10 — — — 2x150 2x185 2x240 —Minimum Cu busbar section (mm2) — — — — — — 2x30x5 2x40x5 2x50x5 2x60x5Maximum Cu cable section (mm2) 70 70 70 — — — — — — —

(1) A/B: Category with index A = frequent operation; category with index B = infrequent operation.(2) The power value is given for information only; the current values vary from one manufacturer to another.(3) For a rated operating voltage, Ue = 400Vac.

IEC Electrical Specifications

RD30-3 RD200-3 RD600-3


Disconnect Switches



DisconnectSw

itches

Part Number3-Pole RD30-3 RD60-3 RD100-3 RD100-3-SCCR RD200-3 RD400-3 RD600-3 RD800-3 RD1000-3 RD1200-34-Pole — — — — RD200-4 RD400-4 RD600-4 RD800-4 RD1000-4 RD1200-4UL Standard UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98 UL 98Max Ampacity 30A 60A 100A 100A 200A 400A 600A 800A 1000A 1200ASwitch Type Compact Compact Compact Standard Standard Standard Standard Standard Standard StandardHandle Operation Front/Side Front/Side Front/Side Front Front Front Front Front Front Front

UL Electrical RatingsMax Voltage (AC) 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac 600Vac 600VacMax Voltage (DC) — — — 250Vdc 250Vdc — 250Vdc — — —Maximum AC Horsepower Ratings

1-Phase, 120Vac 2 3 5 — — — — — — —1-Phase, 240Vac 5 10 10 10 10 — — — — —3-Phase, 240Vac 10 20 20 30 75 125 200 200 200 2003-Phase, 480Vac 20 40 50 75 150 250 400 500 500 5003-Phase, 600Vac 25 50 50 100 200 350 350 500 500 500

DC Horsepower Ratings125Vdc — — — — — — 20 — — —250Vdc — — — — — — 50 — — —

Electrical CharacteristicsSCCR with Fuse 100kA 100kA 25kA/100kA* 200kA 200kA 200kA 200kA 100kA 100kA 100kAFuse Class J J J J J J J L L LMax. Fuse Rating 30A 60A 100A 100A 200A 400A 600A 800A 1000A 1200ATerminal Lugs/Kits Integral Integral Integral • • • • • • •Lug Mounting Torque - Lb-In (N•m) - - - 160 (18) 160 (18) LUG2-_ 310 (35) 310 (35) 310 (35) 310 (35) 310 (35)

LUG3-_ 398 (45)Wire Type 75°C Cu 75°C Cu 75°C Cu 75°C Cu/Al 75°C Cu/Al 75°C Cu/Al 75°C Cu/Al 75°C Cu/Al 75°C Cu/Al 75°C Cu/AlWire Range & Torque - Lb-In (N•m)

Solid #12-10 #12-10 #12-10 — — — — — — —35.4 (4) 35.4 (4) 35.4 (4) — — — — — — —

Stranded #10-1 #10-1 #10-1 #6-300MCM #6-300MCM LUG2-_ #4-600MCM (2) #2-600MCM (4) #2-600MCM (4) #2-600MCM (4) #2-600MCM35.4 (4) 35.4 (4) 35.4 (4) 275 (31) 275 (31) 550 (62) 375 (42.4) 375 (42.4) 375 (42.4) 375 (42.4)

1/0 1/0 1/0 Dual 1/0-250MCM39.8 (4.5) 39.8 (4.5) 39.8 (4.5) 550 (62)

2/0 2/0 2/0 LUG3-_:(2) #6-244.3 (5) 44.3 (5) 44.3 (5) 200 (22.6)

(2) #1-350MCM375 (42.4)

Mechanical CharacteristicsEndurances/Cycles 10,000 10,000 10,000 10,000 8000 6000 6000 3500 3500 3500

Physical CharacteristicsDimensions

See drawings on product pagesWeight - Lbs (KG)

3-Pole 1.3 (0.6) 1.3 (0.6) 1.3 (0.6) 4.2 (1.91) 4.2 (1.91) 10.0 (4.6) 18.1 (8.2) 19.6 (8.9) 19.6 (8.9) 19.6 (8.9)4-Pole — — — — 5.0 (2.3) 12.3 (5.6) 23.9 (10.9) 25.3 (11.5) 25.3 (11.5) 25.3 (11.5)

EnvironmentalOperating Temperature -20°C to 70°C -20°C to 70°C -20°C to 70°C -20°C to 70°C -20°C to 70°C -20°C to 70°C -20°C to 70°C -20°C to 70°C -20°C to 70°C -20°C to 70°CFlammability Rating UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0

AccessoriesLug Kit Part #

3-Pole Integral Integral Integral • • • • • • •4-Pole — — — — • • • • • •

HandlesNEMA 1, 3R, 12 • • • • • • — — — —NEMA 1, 3R, 4, 4X, 12 • • • • • • • • • •Direct • • • • • • • • • •Front Pistol — — — • • • • • • •Front or Side Selector • • • — — — — — — —

Shaft c/s - mm 5x5 5x5 5x5 10x10 10x10 10x10 12x12 12x12 12x12 12x12Shaft Guide • • • • • • • • •• •Shrouds • • • • • • • • • •Additional Pole Accessory • • • — — — — — — —Auxiliary Contacts

NO + NC • • • • • • • • • •(2) NO • • • — — — — — — —

• Available, see product page for details and part numbers.— Not available.

* 25kA @ 600Vac, 100kA @ 480Vac.

Specifications

RD30-3 RD200-3 RD600-3


Disconnect Switches

UL 98 Non-Fused Rotary Disconnect Switches—30, 60 and Compact 100A



Sel

ect

for

Sta

nd

ard

Ap

plic

atio

ns


Switch 1-Phase 3-PhaseAmp No. of 120 220/ 220/ 440/ 600 Wire Wire PartRating Poles SCCR Vac 240Vac 240Vac 480Vac Vac Size Type Number

30 3 100kA 2 5 10 20 25 #10-2/0 Str 75°C Cu RD30-3#12-10 Sol

60 3 100kA 3 10 20 40 50 #10-2/0 Str 75°C Cu RD60-3#12-10 Sol

100 3 25/100kA* 5 10 20 50 50 #10-2/0 Str 75°C Cu RD100-3#12-10 Sol

* 100kA @480Vac, 25kA @ 600Vac.

Direct Mount Handle - mounts directly to switch, no shaft requiredFor Switch Test PartPart Number Color Function Padlockable NumberAll Switches Black N Y - On Switch DIR-02

External Front or Right Side Operated Selector Handles - shaft requiredNEMA Handle Test PartType Color Length Function Padlockable Defeatable Number1, 3R, 4, 4X, 12 Black Short N Y Y H4X-01B(1)

1, 3R, 4, 4X, 12 Red/Yellow Short N Y Y H4X-01R(1)

1, 3R, 4, 4X, 12 Black Long N Y Y H4X-02B(2)

1, 3R, 4, 4X, 12 Red/Yellow Long N Y Y H4X-02R(2)

Shafts for Selector HandlesLength Mounting Depth Partin (mm) (X) in (mm) Number5.9 (150) 3.50~7.60 (89~193) SH4-1507.9 (200) 3.50~9.50 (89~241) SH4-20012.6 (320) 3.50~14.9 (89~378) SH4-320

Shaft GuidePartNumber

Required for 12.6” (320mm) long shafts, optional for other lengths SH-GUIDE1

Auxillary ContactsContact Number of Continuous Voltage Max Number of Aux PartType Contacts Amp Rating Rating Contacts per Switch NumberNO + NC 1 of each 10A 240Vac 4 BAC01NO 2 10A 240Vac 4 BAC02

+

+

Terminal Shrouds - includes terminal shroud for both lineside and loadsideSwitch Amp Number Location on PartRating of Poles Switch NumberAll Switches 1 (for switched 4th pole) Lineside and Loadside TSH3-1TBAll Switches 3 Lineside and Loadside TSH3-3TB

Switched 4th Pole - converts 3-pole switch to 4-poleSwitch Amp PartRating Number30 POLE98-3060 POLE98-60100 POLE98-100

Auxiliary Contact Configurations Possible 4th Pole Configurations

X

Acc

esso

ries

AU

XC

ON

TAC

TSS

HR

OU

DS

SW

. 4TH

PO

LES

WIT

CH

HA

ND

LES

or

+

and …

and …

and …

(2)(1)


Disconnect Switches

UL 98 Non-Fused Rotary Disconnect Switches—30, 60 and Compact 100A


DisconnectSw

itches

Dimensions - in (mm)Direct Handle Operation

75

64

53

0.24

6

12

4.6

13

1.4

18

9

26

78

8.8 8.826 26 26

M5

2.95

2.52

2.09

4.9

1

0.35 0.351.021.02 1.02

5.1

7

7.4

4

1.02

3.07

21

21

36 100 min./372 max.

81

64

2.080.26

50.6

1.42 3.94 min./14.65 max.

3.19

2.52

1.99

536

2.7

971

13

12

4.6

13

1.4

18

9

26

7836

8.8 8.826 26 26

M5

30 min./201 max.

3.07

1.02

0.51

1.18 min./7.91 max. 1.42

4.9

0

0.34 0.341.021.021.02

5.1

7

7.4

4

2.7

971

2

1

2

1

External Front Operation External Right Side Operation

13.5

Ø 22.5

3

40

4 Ø 7

Ø 31

28


H4X-01_

Door Drilling LayoutsHandle Type

0

I

90°


0

I

90°

Direction of Right Side Operation

1.57

4 Ø 0.27

1.1

0

Ø 1.22

0.11

0.5

3

Ø 0.88

Ø3.07

1.42

2.7

9

Ø78

36

71

Ø78

37

88

Ø3.07

1.45

3.4

6

H4X-02_

1. Position for 1 switched 4th pole (1 per device max.) or 1 auxiliary contact.2. Position for 1 auxiliary contact only.Note: Maximum of 4 auxiliary contacts, or 3 auxiliary contacts + one switched 4th pole.

External Front or Right Side Operated Selector Handle


Disconnect Switches

UL 98 Non-Fused Rotary Disconnect Switches—100, 200 and 400A



Sel

ect

for

Sta

nd

ard

Ap

plic

atio

ns


Switch 1-Phase 3-PhaseAmp No. of 220/ 220/ 440/ 600 PartRating Poles SCCR 240Vac 240Vac 480Vac Vac Number100 3 200kA 10 30 75 100 RD100-3-SCCR200 3 200kA 10 75 150 200 RD200-3200 4 200kA 10 75 150 200 RD200-4400 3 200kA - 125 250 350 RD400-3400 4 200kA - 125 250 350 RD400-4

Terminal Lug KitSwitch No. of Lugs PartAmp Rating Poles Per Kit Wire Range Wire Type Number100-200 2 2 #6-300MCM 75°C Cu/Al LUG1-2100-200 3 3 #6-300MCM 75°C Cu/Al LUG1-3100-200 4 4 #6-300MCM 75°C Cu/Al LUG1-4400 2 2 #4-600MCM or Dual 1/0-250MCM 75°C Cu/Al LUG2-2400 3 3 #4-600MCM or Dual 1/0-250MCM 75°C Cu/Al LUG2-3400 4 4 #4-600MCM or Dual 1/0-250MCM 75°C Cu/Al LUG2-4400 2 2 (2) #6-350MCM 75°C Cu/Al LUG3-2400 3 3 (2) #6-350MCM 75°C Cu/Al LUG3-3400 4 4 (2) #6-350MCM 75°C Cu/Al LUG3-4

Direct Mount Handle - mounts directly to switch, no shaft requiredFor Switch Test PartPart Number Color Function Padlockable NumberAll Switches Black N Y DIR-03

External Front Operated Pistol Handles - shaft requiredNEMA Test PartType Color Function Padlockable Defeatable Number1, 3R, 12 Black N Y Y H12-03B1, 3R, 12 Red/Yellow N Y Y H12-03R1, 3R, 4, 4X, 12 Black N Y Y H4X-06B1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-06R





Auxillary ContactsContact Number of Continuous Voltage Max Number of Aux PartType Contacts Amp Rating Rating Contacts per Switch NumberNO + NC 1 of each 10.1A 125-250Vac 2 BAC03*NO + NC 1 of each 10.1A 125-250Vac 2 BAC04*NO + NC 1 of each 1A 125Vac 2 BAC11*NO + NC 1 of each 1A 125Vac 2 BAC12*

* For one auxiliary contact, install either BAC03 or BAC11. For two auxiliary contacts, install BAC03 + BAC04, or BAC11 + BAC12.

+

+

+

X

Acc

esso

ries

and …

AU

XC

ON

TAC

TSS

WIT

CH

+ L

UG

SH

AN

DLE

or

or

+


Disconnect Switches

UL 98 Non-Fused Rotary Disconnect Switches—100, 200 and 400A


DisconnectSw

itches

Acc

esso

ries

Terminal Shrouds - includes terminal shroud for lineside or loadsideSwitch Amp Number Location on PartRating of Poles Switch Number100-200A 3 Lineside TSH4-3T100-200A 3 Loadside TSH4-3B100-200A 4 Lineside or Loadside TSH4-4TB400A 3 Lineside TSH5-3T400A 3 Loadside TSH5-3B400A 4 Lineside or Loadside TSH5-4TB

Y

AC

KC

A

V

N AA

H

ZJ1 U

R1

M

ADT

F C

1

R2

W

Switch Overall Terminal Switch SwitchRating Dimen. Shrouds Body Mounting Connection(A) C AC AD F 3p. F 4p. H J1 3p. J1 4p. K M 3p. M 4p. N R1 R2 T U V W Y Z AA AC

100 3.72 10.1 3.05 7.09 9.06 4.22 2.17 4.13 1.8 6.3 8.27 5.31 0.35 0.27 1.97 0.98 1.18 0.43 0.14 1.35 6.3 0.6(94.6) (256) (77.5) (180) (230) (107) (55) (105) (45.6) (160) (210) (135) (9) (7) (50) (25) (30) (11) (3.5) (34.4) (160) (15)

200 3.72 10.1 3.05 7.09 9.06 4.22 2.17 4.13 1.8 6.3 8.27 5.31 0.35 0.27 1.97 0.98 1.18 0.43 0.14 1.35 6.3 0.6(94.6) (256) (77.5) (180) (230) (107) (55) (105) (45.6) (160) (210) (135) (9) (7) (50) (25) (30) (11) (3.5) (34.4) (160) (15)

400 4.92 16 4.15 9.05 11.4 6.53 2.95 5.31 2.65 8.26 10.6 7.67 0.35 0.27 2.56 1.77 1.97 0.43 0.2 2.08 10.2 0.8(128) (406) (115) (230) (290) (166) (75) (135) (67.5) (210) (270) (195) (9) (7) (65) (45) (50) (13) (5) (53) (260) (20)

Dimensions - in (mm)

1.57

40

5.3

1

13

5

1.79

45.5

Direct Mount Handle

H4X-06__

H12-03__

65°

TEST

90°

0

Ø78

1.77

4.9

2

Direction of Front OperationHandle Type Door Drilling Layout

Ø3.07

0.78

4 Ø 0.27

0.55

Ø 1.46

4 Ø 7

Ø 37

20

20

140.5514

0.78

45

125

I

External Front Handle

Terminal Lugs

400A

LUG2-__

100 to 200A

LUG1-__

400A

LUG3-__

1.5238.8

1 25

1.1

228.6

0.45Ø11.6

0.4611.68

0.2

56

.35

2.8

71.5

Ø 0.4

Ø 4.71.3 35

1.8 46

0.4

4

11

.13

0.63

15.88

0.8873.152.31

58.67 0.5313.46

1.1930.23

1.9

44

9.3

0

0.256.35

1.2

53

1.7

5

DIR-03

and …

SH

RO

UD

S


Disconnect Switches

UL 98 Non-Fused Rotary Disconnect Switches—600, 800, 1000 and 1200A



Sel

ect

for

Sta

nd

ard

Ap

plic

atio

ns


Switch 3-Phase DC*Amp No. of 220/ 440/ 600 125 250 PartRating Poles SCCR 240Vac 480Vac Vac Vdc Vdc Number600A 3 200kA 240 400 350 20 50 RD600-3600A 4 200kA 240 400 350 20 50 RD600-4800A 3 100kA 200 500 500 - - RD800-3800A 4 100kA 200 500 500 - - RD800-41000A 3 100kA 200 500 500 - - RD1000-31000A 4 100kA 200 500 500 - - RD1000-41200A 3 100kA 200 500 500 - - RD1200-31200A 4 100kA 200 500 500 - - RD1200-4


Terminal Lug KitSwitch No. of Lugs Lugs Required Wire PartAmp Rating Poles Per Kit per Pole Range Wire Type Number600 3 3 1 (2) #2-600MCM 75°C Cu/Al LUG5-3600 4 4 1 (2) #2-600MCM 75°C Cu/Al LUG5-4800-1200 3 6 2 (4) #2-600MCM 75°C Cu/Al LUG6-6800-1200 4 8 2 (4) #2-600MCM 75°C Cu/Al LUG6-8

Direct Mount Handle - mounts directly to switch, no shaft requiredFor Switch Test PartPart Number Color Function Padlockable NumberAll Switches Black N Y DIR-04

External Front Operated Pistol Handles - shaft requiredNEMA Test PartType Color Function Padlockable Defeatable Number1, 3R, 4, 4X, 12 Black N Y Y H4X-07B(1)

1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-07R(1)

1, 3R, 4, 4X, 12 Black N Y Y H4X-08B(2)

1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-08R(2)

Metallic Hasp (Heavy Duty) External Front Operated Pistol Handles - shaft requiredNEMA Test PartType Color Function Padlockable Defeatable Number1, 3R, 4, 4X, 12 Black N Y Y H4X-07BHD(3)

1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-07RHD(3)

1, 3R, 4, 4X, 12 Black N Y Y H4X-08BHD(4)

1, 3R, 4, 4X, 12 Red/Yellow N Y Y H4X-08RHD(4)




Auxillary ContactsContact Number of Continuous Voltage Max Number of Aux PartType Contacts Amp Rating Rating Contacts per Switch NumberNO + NC 1 of each 10.1A 125-250Vac 2 BAC03*NO + NC 1 of each 10.1A 125-250Vac 2 BAC04*NO + NC 1 of each 1A 125Vac 2 BAC11*NO + NC 1 of each 1A 125Vac 2 BAC12*


+

or

+

+

X

(1) (2)

(3)(4)

Acc

esso

ries

AU

XC

ON

TAC

TSS

WIT

CH

+ L

UG

SH

AN

DLE

or

+

and …


Disconnect Switches

UL 98 Non-Fused Rotary Disconnect Switches—600, 800, 1000 and 1200A


DisconnectSw

itches

Acc

esso

ries

Terminal Shrouds* - includes terminal shroud for lineside or loadsideSwitch Amp Number Location on PartRating of Poles Switch Number600A 3 Lineside or Loadside TSH6-3TB600A 4 Lineside or Loadside TSH6-4TB800-1200A 3 Lineside or Loadside TSH7-3TB800-1200A 4 Lineside or Loadside TSH7-4TB

* Shroud for lineside included with switch.

600A

Switch Terminal Switch SwitchRating Shrouds Body Mounting Connection(A) B F 3p. F 4p. H J 3p. J 4p. M 3p. M 4p. N N1 N2 AA Z

600 18.12 11 14.17 5.5 5 6.59 10.03 13.19 6.88 2.34 1.10 12.6 1.85 (460) (280) (360) (140) (127.5) (167.5) (255) (335) (175) (59.5) (28) (320) (47)

800 18.12 14.64 19.37 5.5 6.83 9.19 13.66 18.38 6.88 2.34 1.10 13 1.85

(460) (372) (492) (140) (173.5) (233.5) (347) (467) (175) (59.5) (28) (330) (47)1000 18.12 14.64 19.37 5.5 6.83 9.19 13.66 18.38 6.88 2.34 1.10 13 1.85

(460) (372) (492) (140) (173.5) (233.5) (347) (467) (175) (59.5) (28) (330) (47)1200 18.12 14.64 19.37 5.5 6.83 9.19 13.66 18.38 6.88 2.34 1.10 13 1.85

(460) (372) (492) (140) (173.5) (233.5) (347) (467) (175) (59.5) (28) (330) (47)

800 to 1200A

H4X-07__

61

210

90°

0

Direction of Front OperationHandle Type

Door Drilling Layout

Ø3.07Ø78

0.78

4 Ø 0.27

0.55

Ø 1.46

4 Ø 7

Ø 37

20

20

140.5514

0.78

8.2

7

2.4

H4X-08__ 2.36

13.7

8

Ø3.07

90°

I

0

Ø78

350

60

I

Terminal Lugs

600 to 1200A

LUG5-__, LUG6-__

3.1580

1.49 38

2.87 73

0.40Ø10.2

3.7695.5

0.64

16.2

60

2.36

85

3.35

190

7.48

Direct Mount Handle

DIR-04

External Front Pistol Handles

Dimensions - in (mm)

and …

SH

RO

UD

S


Disconnect Switches



Description

Bussmann UL 508 load break disconnect switches allow safecontrol and safe disconnection of any motor application or toisolate a circuit within the panel.

These disconnect switches are compact and offer a widevariety of accessories like 4th poles, auxiliary contacts, doormounting and 6/8-Pole kits.

Features

• Suitable as motor disconnect

• DIN-Rail or panel mount

• Door mount option

• Disconnect switches are front, right side or direct handle operable

• Finger-safe

Agency Information

• UL508, Guide NLRV, File E155129

• CSA C22.2 No. 14, File 257020


Online Resources

Visit www.cooperbussmann.com/Disconnects for:

• CAD Drawings

• Instruction Sheets

• UL Information

Related Cooper Bussmann ProductsProduct Data Sheet #

Fuses BlocksModular Knifeblade Fuse Blocks 100-600A 3192

Fuses HoldersCH Series Class CC, Midget & 10x38 0-30A 3185Finger-Safe Optima Series 0-30A 1102Optima™ Protection Modules 0-30A 1109CH Series Class J 0-60A 2144

Part Number RD16-3-508 RD25-3-508 RD40-3-508 RD63-3-508 RD80-3-508Thermal Current Ith at 40°C (A) 16 25 40 63 80Rated insulation voltage Ui (V) 800 800 800 800 800Rated impulse withstand voltage Uimp (kV) 8 8 8 8 8Rated Operation Currents Ie (A)

Load Duty Category Rated Voltage A/B (1) A/B (1) A/B (1) A/B (1) A/B (1)

500Vac AC-22 A/AC-22 B 16/16 25/25 40/40 63/63 80/80500Vac AC-23 A/AC-23 B 16/16 25/25 25/25 63/63 63/63690Vac AC-21 A/AC-21 B 16/16 25/25 40/40 63/63 80/80690Vac AC-22 A/AC-22 B 16/16 25/25 32/40 40/63 63/80690Vac AC-23 A/AC-23 B 16/16 25/25 25/25 40/40 40/40

Operational Power in AC-23 (kW)400Vac without prebreak AC (1)(2) 7.5 11 18.5 30 37500Vac without prebreak AC (1)(2) 7.5 11 15 30 37690Vac without prebreak AC (1)(2) 7.5 15 18.5 30 37

Overload Capacity (Ue 415 Vac)Rated short-time withstand current 0.3 s. ICW (kA rms) (3) 2.5 2.5 2.5 3 3Rated short-time making capacity Icm (kA peak) (3) 6 6 6 9 9

Fuse Protected Short-Circuit Withstand (kA rms Prospective)Prospective short-circuit current (kA rms) (3) 50 50 50 50 50Associated fuse rating (A) (3) 16 25 40 63 80

ConnectionMinimum Cu cable cross section (mm2) 1.5 1.5 1.5 2.5 2.5Maximum Cu cable section (mm2) 16 16 16 35 35Tightening torque min/max (N•m) 2/2.2 2/2.2 2/2.2 3.5/3.85 3.5/3.85

(1) A/B: Category with index A = frequent operation; category with index B = infrequent operation.(2) The power value is given for information only; the current values vary from one manufacturer to another.(3) For a rated operating voltage, Ue = 400Vac.

IEC Electrical Specifications

RD16-3-508 RD16-3-508 with 6-Pole Conversion Kit

QuikShip Everyday Service ships themost common part numbers within24 hours. Contact your Bussmann representative for details.


Disconnect Switches



DisconnectSw

itches

Part Number RD16-3-508 RD25-3-508 RD40-3-508 RD63-3-508 RD80-3-508UL Standard UL 508 UL 508 UL 508 UL 508 UL 508Max Ampacity 16A 25A 40A 63A 80AHandle Operation Front/Side Front/Side Front/Side Front/Side Front/Side

UL Electrical RatingsMax Voltage (AC) 600Vac 600Vac 600Vac 600Vac 600VacMaximum Horsepower Ratings

3-Phase, 208Vac 3 7.5 7.5 15 153-Phase, 240Vac 5 7.5 7.5 20 203-Phase, 480Vac 10 15 20 40 403-Phase, 600Vac 10 20 25 40 40

Electrical CharacteristicsSCCR with Fuse 65kA 65kA 10/65kA 50/65kA 50/65kARecommended UpstreamFuse Class J J J J JMax. Fuse Rating 30A 30A 60/30A 100/60A 100/60ATerminals Integral Integral Integral Integral IntegralWire Type 75°C Cu 75°C Cu 75°C Cu 75°C Cu 75°C CuWire Range & Torque - Lb-IN (N•m)

SolidSingle #14-10 #14-10 #14-10 #14-10 #14-10

26.5 (3) 26.5 (3) 26.5 (3) 31.1 (3.5) 31.1 (3.5)Dual #12 #12 #12 #12 #12

26.5 (3) 26.5 (3) 26.5 (3) 31.1 (3.5) 31.1 (3.5)Stranded

Single #14-4 #14-4 #14-4 #14-1 #14-126.5 (3) 26.5 (3) 26.5 (3) 31.1 (3.5) 31.1 (3.5)

Dual #14-12 #14-12 #14-12 #10-6 #10-626.5 (3) 26.5 (3) 26.5 (3) 31.1 (3.5) 31.1 (3.5)

Mechanical CharacteristicsEndurances/Cycles 10,000 10,000 10,000 10,000 10,000

Physical CharacteristicsDimensions - See drawings on product pagesWeight - Lb (KG) 0.5 (0.2) 0.5 (0.2) 0.5 (0.2) 0.7 (0.32) 0.7 (0.32)

EnvironmentalOperating Temperature -20°C to 70°C -20°C to 70°C -20°C to 70°C -20°C to 70°C -20°C to 70°CFlammability Rating UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0 UL 94-V0

AccessoriesHandles

Direct DIR-01 DIR-01 DIR-01 DIR-01 DIR-01Short Selector/NEMA 1, 3R, 4, 4X, 12 H4X-01B H4X-01B H4X-01B H4X-01B H4X-01B

H4X-01R H4X-01R H4X-01R H4X-01R H4X-01RLong Selector/NEMA 1, 3R, 4, 4X, 12 H4X-02B H4X-02B H4X-02B H4X-02B H4X-02B

H4X-02R H4X-02R H4X-02R H4X-02R H4X-02RShafts - 5x5mm

5.9”/150mm SH4-150 SH4-150 SH4-150 SH4-150 SH4-1507.9”/200mm SH4-200 SH4-200 SH4-200 SH4-200 SH4-20012.6”/320mm SH4-320 SH4-320 SH4-320 SH4-320 SH4-320

Shaft Guide SH-GUIDE1 SH-GUIDE1 SH-GUIDE1 SH-GUIDE1 SH-GUIDE1Door Mount Kit DOOR-508 DOOR-508 DOOR-508 DOOR-508 DOOR-508Shrouds/Switch Amps

1-Pole TSH1-1TB TSH1-1TB TSH1-1TB3-Pole (Loadside and Lineside) TSH1-3TB TSH1-3TB TSH1-3TB TSH2-3TB TSH2-3TB

Switched 4th Pole/Switch Amps POLE-16 POLE-25 POLE-40 — —Auxiliary Contacts

NO + NC (1 ea.) BAC01 BAC01 BAC01 BAC01 BAC01(2) NO BAC02 BAC02 BAC02 BAC02 BAC02AC Ratings

Volts 240Vac 240Vac 240Vac 240Vac 240VacAmps 10A 10A 10A 10A 10A

6-/8-Pole Conversion Kit Gangs two switches of same rating, 16-80A switch amps KIT-6POLE KIT-6POLE KIT-6POLE KIT-6POLE KIT-6POLE

— Not available.

Specifications

RD16-3-508 RD16-3-508 with 6-Pole Conversion Kit


Disconnect Switches

UL 508 Non-Fused Rotary Disconnect Switches—16, 25, 40, 63 and 80A



Sel

ect

for

Sta

nd

ard

Ap

plic

atio

ns

SwitchSwitch Max Max Horsepower Rating, 3-PhAmp No. of SCCR Class J 208 220/ 440/ 600 PartRating Poles @600V Fuse Vac 240Vac 480Vac Vac Wire Size Wire Type Number

#14-#10 Sol

16 3 65kA 30A 3 5 10 10 Dual #12 Sol 75°C Cu RD16-3-508#14-#4 Str

Dual #14-#12 Str#14-#10 Sol

25 3 65kA 30A 7.5 7.5 15 20 Dual #12 Sol 75°C Cu RD25-3-508#14-#4 Str

Dual #14-#12 Str#14-#10 Sol

40 3 10kA 60A 7.5 7.5 20 25 Dual #12 Sol 75°C Cu RD40-3-50865kA 30A #14-#4 Str

Dual #14-#12 Str#14-#10 Sol

63 3 50kA 100A 15 20 40 40 Dual #12 Sol 75°C Cu RD63-3-50865kA 60A #14-#1 Str

Dual #10-#6 Str#14-#10 Sol

80 3 50kA 100A 15 20 40 40 Dual #12 Sol 75°C Cu RD80-3-50865kA 60A #14-#1 Str

Dual #10-#6 Str

Direct Mount Handle - mounts directly to switch, no shaft requiredFor Switch Test PartPart Number Color Function Padlockable NumberAll Switches Black N Y - On Switch DIR-01

External Front or Right Side Operated Selector Handles - shaft requiredNEMA Handle Test PartType Color Length Function Padlockable Defeatable Number1, 3R, 4, 4X, 12 Black Short N Y Y H4X-01B(1)

1, 3R, 4, 4X, 12 Red/Yellow Short N Y Y H4X-01R(1)

1, 3R, 4, 4X, 12 Black Long N Y Y H4X-02B(2)

1, 3R, 4, 4X, 12 Red/Yellow Long N Y Y H4X-02R(2)

Shafts for Selector Handles - required for 12.6” (320mm) shaftsLength Mounting Depth Partin (mm) (X) in (mm) Number5.9 (150) 3.50-7.60 (89-193) SH4-1507.9 (200) 3.50-9.50 (89-241) SH4-20012.6 (320) 3.50-14.9 (89-378) SH4-320


Required for 12.6” (320mm) long shafts, optional for other lengths. SH-GUIDE1

Door Mount Kit - for mounting switch on the right side of the enclosure or directly on the enclosure doorusing switch side operation shaft location. Kit includes a shaft. Order switch and selector handle separately.Switch PartRating NumberAll Switches - kit includes shaft DOOR-508

Auxillary ContactsContact Number of Continuous Voltage Max Number of Aux PartType Contacts Amp Rating Rating Contacts per Switch NumberNO + NC 1 Ea 10A 240Vac 4 BAC01NO 2 10A 240Vac 4 BAC02

+

+

+

(2)(1)

Auxiliary ContactConfigurations

X

Acc

.A

UX

CO

NTA

CTS

SW

ITC

HH

AN

DLE

or

+

and …


Disconnect Switches

UL 508 Non-Fused Rotary Disconnect Switches—16, 25, 40, 63 and 80A


DisconnectSw

itches

Acc

esso

ries Switched 4th Pole - converts 3-pole switch to 4-pole switch

Switch Amp PartRating Number16 POLE-1625 POLE-2540 POLE-40

6-Pole Conversion Kit - creates a 6-pole switch by ganging two 3-pole switches of equal ratingSwitch Amp PartRating NumberAll Switches KIT-6POLE*

* Kit ships with a direct handle. If external handle is needed order a selector handle and shaft for the UL 508 Rotary Disconnect Switches.Note: To create an 8-pole switch from 16 to 40 amp switches, use two 3-pole switches of equal ratings plus two switched 4th poles (part # POLE-_).

Terminal Shrouds - includes terminal shroud for both lineside and loadsideSwitch Amp Number Location on PartRating of Poles Switch Number16-40A 1 (for switched 4th pole) Lineside and Loadside TSH1-1TB16-40A 3 Lineside and Loadside TSH1-3TB63-80A 3 Lineside and Loadside TSH2-3TB

Switched 4th Pole Configurations.

Order switches separately.

Dimensions – in (mm)Direct Handle Operation External Front Operation External Side Operation

Overall Terminal Switch SwitchSwitch Dimensions Shroud Body Mounting ConnectionRating (A) D min D max E min E max AC F F1 G J M N T

16 to 401.18 9.25 3.94 14.64 4.33 1.77 0.59 2.67 0.59 1.18 2.95 0.59(30) (235) (100) (372) (110) (45) (15) (68) (15) (30) (75) (15)

63 to 801.18 9.25 3.93 14.64 4.33 2.06 0.69 2.99 0.69 1.38 3.35 0.69(30) (235) (100) (372) (110) (52.5) (17.5) (76) (17.5) (35) (85) (17.5)

2.67

F

TM5

M

NG AC

2.52

0.241.97

2.95

F1F10.35

21 2

175

64

650

68

8.88.80.35

J

2.6

8

F

T

M5

M

1.42D

NG AC

E1.423.19

2.52

0.23

1.96

1.99

F10.35 F1

ø 2

.79

3681

64

50.6

6

50

8.8 8.8

68

ø 7

1

36

0.35

2

21

1


and …

SH

RO

UD

SS

W.

4THP

OLE

6-P

OLE

KIT

and …

and …


Disconnect Switches

UL 508 Non-Fused Rotary Disconnect Switches—16, 25, 40, 63and 80A


External Selector Handles

13.5

Ø 22.5

3

40

4 Ø 7

Ø 31

28


H4X-01_

Door Drilling LayoutsHandle Type

0

I

90°


0

I

90°

Direction of Right Side Operation

1.57

4 Ø 0.27

1.1

0

Ø 1.22

0.110.5

3

Ø 0.88

Ø3.07

1.42

2.7

9

Ø78

36

71

Ø78

37

88

Ø3.07

1.45

3.4

6

H4X-02_


External Front Operation for 6/8-Pole Disconnects

1.77

3.07

1.361.690.24

3.50

X

N G2.67

T T 0.292.06

MF2

2.06

FJ

F1F10.35

21

21 89

78

43 34.7645

52.5

68

8.8

52.5

8.87.5

0.35

1.42E

ø 2.79

X

N G2.67

T T 0.292.06

MF2

2.06

FJ

F1F10.35

21

21

36

ø 71

52.5

68

8.8

52.5

8.87.5

0.35

Overall Switch SwitchSwitch Dimensions Body Mounting ConnectionRating (A) E min E max F F1 F2 G J M N T X16 to 40 4.13 (105) 14.64 (372) 3.83 (97.5) 0.59 (15) 1.77 (45) 2.67 (68) 1.92 (48.75) 1.18 (30) 2.95 (75) 0.59 (15) 0.29 (7.5)63 to 80 4.13 (105) 14.65 (372) 4.13 (105) 0.69 (17.5) 2.06 (52.5) 2.99 (76) 2.06 (52.5) 1.38 (3.5) 3.35 (85) 0.69 (17.5) 0.34 (8.75)

Dimensions – in (mm)Direct Front Operation for 6/8-Pole Disconnects


Disconnect Switches

UL 98 & UL 508 Enclosed Disconnect Switches


DisconnectSw

itches

Description

Fused and non-fused enclosed Rotary Disconnect Switchesfrom 16 to 1200A in NEMA 1, 3R, 4, 4X, 12 enclosures.

Features

• UL 98 Listed for general purpose, main disconnect, orbranch circuit protection up to 600Vac/dc

• UL 508 Listed for motor disconnect applications up to600Vac

• Multiple field installed accessories enhance the encloseddisconnect switches to fit the desired application

• Lockout/tagout: Up to three 1⁄4˝ shank padlocks can beinstalled on external handles

Ratings:

• Volts: 600Vac250-600Vdc*

• Amps: 16-1200A

• Short-Circuit Current Ratings: UL 98: 25kA-200kAUL 508: 10kA-65kA

*Some non-fused disconnect switches are not rated for DC applications.

Specifications

• Operating temperature: -20ºC to 70ºC

• 4X Plastic Enclosure Flammability Rating:Polycarbonate UL 94-5VA-0Fiberglass UL 94-5V

Agency Information

• UL 98 Listed: File E182262, Guide WIAX, WIAX7

• UL 508 Listed: File E155129, Guide NLRV, NLRV7

• cULus Listed to CSA Standard 22.2, No. 14

• cULus Listed to CSA Standard 22.2, No. 4


• CE Compliant

• RoHS Compliant

Field Installed Accessories

• Auxiliary contacts

• Terminal shrouds

Online Resources

Visit www.cooperbussmann.com/Disconnects for:• CAD Drawings• Instruction Sheets• UL Information

NEMA 1, 3R, 4 & 12 NEMA 4X Polycarbonate or Fiberglass

NEMA 4X Stainless Steel

Available Bussmann FusesClass Type Data Sheet #

CC LP-CC Time-Delay, Current Limiting 1023CC FNQ-R Time-Delay 1014CC KTK-R Fast-Acting 1015J LPJ Time-Delay, Current Limiting 1006 (0-60A)J 1007 (70-600A)J With easyID™open fuse indication 1062 (6-60A)J 1063 (70-600A)J JKS Fast-Acting Fuses 1026 (0-60A)J 1027 (70-600A)J DFJ High Speed Drive Fuse 1048 (0-600A)L KRP-C Time-Delay, Current Limiting 1008L KTU Fast-Acting 1010L KLU Time-Delay 1013

QuikShip Everyday Service ships the most common part numbers within 24 hours. Contact your Bussmann representative for details.


Disconnect Switches

UL 98 Enclosed Fused Disconnects—30 to 800A


UL General NEMA Enclosure Type & Part NumberPurpose FuseAmp Rating Type 1 3R 4 4X Plastic(1) 4X Stainless 1230 J ER1-30J3PB ER3R-30J3PB ER4-30J3PB ER4P-30J3PB ER4X-30J3PB ER12-30J3PB60 J ER1-60J3PB ER3R-60J3PB ER4-60J3PB ER4P-60J3PB ER4X-60J3PB ER12-60J3PB100 J ER1-100J3PB ER3R-100J3PB ER4-100J3PB ER4P-100J3PB ER4X-100J3PB ER12-100J3PB200 J ER1-200J3PB ER3R-200J3PB ER4-200J3PB ER4P-200J3PB ER4X-200J3PB ER12-200J3PB400 J ER1-400J3PB ER3R-400J3PB ER4-400J3PB ER4P-400J3PB ER4X-400J3PB ER12-400J3PB600 J ER1-600J3PB ER3R-600J3PB ER4-600J3PB ER4P-600J3PB ER4X-600J3PB ER12-600J3PB800 L ER1-800L3PB ER3R-800L3PB ER4-800L3PB ER4P-800L3PB ER4X-800L3PB ER12-800L3PB(1) Enclosures ≤100A are polycarbonate, flammability rating UL 94-5VA-V0, ≥200A are fiberglass, flammability rating UL 94-5V.

Switch Disconnect Fuse No. of Voltage SCCR Max Hp RatingAmp Rating Switch Type Poles Vac Vdc @ Vac @ 600Vac30 RDF30J-3 J 2060 RDF60J-3 J

25050

100 RDF100J-3 J600 200kA

75200 RDF200J-3 J 3 150400 RDF400J-3 J 350600 RDF600J-3 J

600 500800 RDF800L-3 L

Switch Ratings - for wire types, ranges and tightening torques, see table on page 387

3-Pole UL 98 600Vac

Part Number System: ER 4X - 60 J 3 P B

EREnclosed Rotary Disconnect

NEMA Rating1, 3R, 4, 4X (SST), 4P (4X Plastic), 12

Amp Rating30, 60, 100, 200, 400, 600, 800

Fuse ClassJ = Class J, L = Class L

Number of Poles3 = 3-Pole

Handle TypeP = Pistol

Handle ColorB = Black, R = Red

NEMA 1, 3R, 4 & 12 NEMA 4X Plastic NEMA 4X Stainless

Part Numbers - All part numbers provided with integral or installed lugs and a black selector handle.Order red/yellow handle by changing the suffix “B” to “R.”

30-800A


Disconnect Switches

UL 98 Enclosed Fused Disconnects—30 to 800A


DisconnectSw

itches

Part Amp Fuse NEMA Mounting Centers H x W WeightNumber Family Rating Type Enclosure Type H x W x D A B C Lbs

1, 3R, 4, 12 10x10x6 8.3x8.3 15ER_-30J 30 J 4X-SST 10x10x6 9.5x8.3 8.3x9.5 15

4X-Plastic(1) 12x10x6 12x5.6 7.64x10 81, 3R, 4, 12 12x10x6 10.3x8.3 19

ER_-60J 60 J 4X-SST 12x10x6 11.5x8.3 10.3x9.5 194X-Plastic(1) 13x13x6 14x7.6 9.6x12 111, 3R, 4, 12 14x12x6 12.3x10.3 21

ER_-100J 100 J 4X-SST 14x12x6 13.5x10.3 12.3x11.5 214X-Plastic(1) 13x13x6 14x7.6 9.6x12 121, 3R, 4, 12 24x20x8 22x18.1 55

ER_-200J 200 J 4X-SST 24x20x8 23.2x18.1 22x19.3 554X-Plastic(1) 27x21x10 25.75x14 391, 3R, 4, 12 48x36x12 45.75x34.9 188

ER_-400J 400 J 4X-SST 48x36x12 46.9x34.9 45.75x36.1 1884X-Plastic(1) 51x37x14 50.1x28.5 1861, 3R, 4, 12 48x36x12 45.75x34.9 216

ER_-600J 600 J 4X-SST 48x36x12 46.9x34.9 45.75x36.1 2164X-Plastic(1) 51x37x14 50.1x28.5 2141, 3R, 4, 12 48x36x12 45.75x34.9 216

ER_-800L 800 L 4X-SST 48x36x12 46.9x34.9 45.75x36.1 2164X-Plastic(1) 51x37x14 50.1x28.5 214

(1) Enclosures ≤100A are polycarbonate, flammability rating UL 94-5VA-V0, ≥200A are fiberglass, flammability rating UL 94-5V.

Enclosure Weights - Lbs & Dimensions - in

Available Field-Installed Accessories - Order Separately

Auxiliary Contacts - for 30 to 800 Amp SwitchesContact Number of Continuous Voltage Max Number of Aux PartType Contacts Amp Rating Rating Contacts per Switch NumberNO 1 10A 600Vac 30 to 200A: 4 BAC05NC 1 10A 600Vac 400 to 800A: 8 BAC06

Terminal Shrouds - for 200 to 800 Amp Switches - includes terminal shroud for lineside or loadsideSwitch Number PartAmp Rating of Poles Number200 3 TSH8-3TB400 3 TSH9-3TB600-800 3 TSH10-3TB

WW

W

MWMW

MW

H H HMHMH MHA B C


Disconnect Switches

UL 98 Enclosed Non-Fused Disconnects—30 to 1200A


Switch Disconnect No. of Voltage SCCR Max Hp RatingAmp Rating Switch Poles Vac Vdc @ Vac @ 600Vac30 RD30-3

100kA25

60 RD60-3 N/A50

100 RD100-3 25kA/100kA*200 RD200-3 200400 RD400-3 3 600 250 200kA

350600 RD600-3800 RD800-3 N/A 100kA 5001200 RD1200-3

* 25kA @ 600Vac, 100kA @ 480Vac.


Part Numbers - All part numbers provided with integral or installed lugs and a black selector handle. Order red/yellow handle by changing the suffix “B” to “R.”

3-Pole UL 98 600Vac

UL General NEMA Enclosure Type & Part NumberPurposeAmp Rating 1 3R 4 4X Plastic(1) 4X Stainless 1230 ER1-30N3SB ER3R-30N3SB ER4-30N3SB ER4P-30N3SB ER4X-30N3SB ER12-30N3SB60 ER1-60N3SB ER3R-60N3SB ER4-60N3SB ER4P-60N3SB ER4X-60N3SB ER12-60N3SB100 ER1-100N3SB ER3R-100N3SB ER4-100N3SB ER4P-100N3SB ER4X-100N3SB ER12-100N3SB200 ER1-200N3PB ER3R-200N3PB ER4-200N3PB ER4P-200N3PB ER4X-200N3PB ER12-200N3PB400 ER1-400N3PB ER3R-400N3PB ER4-400N3PB ER4P-400N3PB ER4X-400N3PB ER12-400N3PB600 ER1-600N3PB ER3R-600N3PB ER4-600N3PB ER4P-600N3PB ER4X-600N3PB ER12-600N3PB800 ER1-800N3PB ER3R-800N3PB ER4-800N3PB ER4P-800N3PB ER4X-800N3PB ER12-800N3PB1200 ER1-1200N3PB ER3R-1200N3PB ER4-1200N3PB N/A ER4X-1200N3PB ER12-1200N3PB(1) Enclosures ≤100A are polycarbonate, flammability rating UL 94-5VA-V0, ≥200A are fiberglass, flammability rating UL 94-5V.

NEMA 1, 3R, 4 & 12

30-100A

NEMA 4X

200-1200A

NEMA 1, 3R, 4 & 12 NEMA 4X

NEMA 4X Stainless

NEMA 4X Stainless

Part Number System: ER 4X - 60 N 3 S B



Amp Rating30, 60, 100, 200, 400, 600, 800, 1200

N = Non-FusedNumber of Poles

3 = 3-PoleHandle Type*

P = Pistol, S = SelectorHandle Color

B = Black, R = Red* ≤100A = Selector only, ≥200A = Pistol only.


Disconnect Switches



DisconnectSw

itches

Part Amp NEMA Mounting Centers H x W WeightNumber Family Rating Enclosure Type H x W x D A B C Lbs

1, 3R, 4, 12 10x8x6 8.3x6.3 11ER_-30 30 4X-SST 10x8x6 9.5x6.3 8.3x7.5 11

4X-Plastic(1) 9x9x6 10x3.6 5.6x8 51, 3R, 4, 12 10x8x6 8.3x6.3 12

ER_-60 60 4X-SST 10x8x6 9.5x6.3 8.3x7.5 124X-Plastic(1) 9x9x6 10x3.6 5.6x8 51, 3R, 4, 12 12x10x6 10.3x8.3 12

ER_-100 100 4X-SST 12x10x6 11.5x8.3 0.3x9.5 124X-Plastic(1) 13x13x6 14x7.6 9.6x12 81, 3R, 4, 12 20x16x8 18.1x14.2 39

ER_-200 200 4X-SST 20x16x8 19.3x14.2 18.1x15.4 394X-Plastic(1) 23x17x12 21.5x10.1 311, 3R, 4, 12 36x30x8 33.9x28.3 122

ER_-400 400 4X-SST 36x30x8 35.1x28.3 33.9x29.5 1224X-Plastic(1) 40x32x14 38.1x23.9 1031, 3R, 4, 12 48x36x12 45.8x34.9 209

ER_-600 600 4X-SST 48x36x12 47x34.9 45.8x36.1 2094X-Plastic(1) 51x37x 14 50.1x28.5 1871, 3R, 4, 12 48x36x12 45.8x34.9 211

ER_-800 800 4X-SST 48x36x12 47x34.9 45.8x36.1 2114X-Plastic(1) 51x37x 14 50.1x28.5 189

ER_-1200 1200 1, 3R, 4, 12 60x36x16 57.5x33.9 2684X-SST 60x36x16 58.7x33.9 57.5x35.1 268

(1) Enclosures ≤100A are polycarbonate, flammability rating UL 94-5VA-V0, ≥200A are fiberglass, flammability rating UL 94-5V.



Auxiliary Contacts - for 30 to 1200 Amp SwitchesSwitch Contact Number of Continuous Voltage Max Number of Aux PartAmp Rating Type Contacts Amp Rating Rating Contacts per Switch Number30-100 NO + NC 1 of each 10A 240Vac 4 BAC0130-100 NC 2 10A 240Vac 4 BAC02100-1200 NO + NC 1 of each 10.1A 125-250Vac 2 BAC03*100-1200 NO + NC 1 of each 10.1A 125-250Vac 2 BAC04*100-1200 NO + NC 1 of each 1A 125Vac 2 BAC11*100-1200 NO + NC 1 of each 1A 125Vac 2 BAC12*


Terminal Shrouds - for 200 to 800 Amp SwitchesSwitch Number Location PartAmp Rating of Poles on Switch Number30-100 3 Lineside and Loadside TSH3-3TB200A 3 Lineside TSH4-3T200A 3 Loadside TSH4-3B400A 3 Lineside TSH5-3T400A 3 Loadside TSH5-3B600A 3 Lineside or Loadside TSH6-3TB800-1200A 3 Lineside or Loadside TSH7-3TB

WW

W

MWMW

MW

H H HMHMH MHA B C


Disconnect Switches



3-/6-Pole UL 508 600Vac

Switch SCCR with Max HpAmp Disconnect Voltage Max Upstream RatingRating Switch Vac Vdc Class J Fuse @ 600Vac16 RD16-3-508 65kA / 30A 1025 RD25-3-508 65kA / 30A 2040 RD40-3-508 600 N/A 65kA / 30A — 10kA / 60A 2563 RD63-3-508 65kA / 60A — 50kA / 100A 4080 RD80-3-508 65kA / 60A — 50kA / 100A 40

Note: Voltage, SCCR and Horsepower ratings are the same for 3- and 6-pole UL 508 non-fused disconnect switches.


UL General NEMA Enclosure Type & Part NumberPurpose No. ofAmp Rating Poles 1 3R 4 4X Plastic(1) 4X Stainless 12

16 3 ER1-16N3SB ER3R-16N3SB ER4-16N3SB ER4P-16N3SB ER4X-16N3SB ER12-16N3SB6 ER1-16N6SB ER3R-16N6SB ER4-16N6SB ER4P-16N6SB ER4X-16N6SB ER12-16N6SB





(1) Polycarbonate enclosure flammability rating UL 94-5VA-V0.

NEMA 1, 3R, 4 & 12 NEMA 4X Plastic NEMA 4X Stainless

Part Number System: ER 4X - 63 N 6 S B



Amp Rating16, 25, 40, 63, 80

N = Non-FusedNumber of Poles

3 = 3-Pole, 6 = 6-PoleHandle Type

S = SelectorHandle Color

B = Black, R = Red

Part Numbers - All part numbers provided with a black selector handle. Order red/yellow handle by changing the suffix “B” to “R.”

16-80A


Disconnect Switches



DisconnectSw

itches

NEMA No. of Switch Amp Mounting Centers H x W WeightEnclosure Type Poles Ratings H x W x D A B C Lbs

1, 3R, 4, 12 3 16-80A 8x6x6 6.3x4.3 86 16-80A 10x8x6 8.3x6.3 11

4X-SST 3 16-80A 8x6x6 7.5x4.3 6.3x5.5 86 16-80A 10x8x6 9.5x6.3 8.3x7.5 11

3 16-63A 7.4x8.7x5.8 8x3.6 3.6x8 44X-Plastic(1) 80A 9.4x8.7x5.9 10x3.6 5.6x8 5

6 16-80A 11.4x10.7x6.3 12x5.6 7.64x10 6(1) Polycarbonate.


Auxillary ContactsContact Number of Continuous Voltage Max Number of Aux PartType Contacts Amp Rating Rating Contacts per Switch Number

NO + NC 1 Ea 10A 240Vac 4 BAC01

NO 2 10A 240Vac 4 BAC02

Auxiliary Contact Configurations

Terminal Shrouds - includes terminal shroud for both lineside and loadsideSwitch Number Location on PartAmp Rating of Poles Switch Number

16-40A 3 Lineside and Loadside TSH1-3TB

63-80A 3 Lineside and Loadside TSH2-3TB


WW

W

MWMW

MW

H H HMHMH MHA B C

Switched 4th Pole - converts 3-pole switch to 4-pole switchSwitch Amp PartRating Number16 POLE-1625 POLE-2540 POLE-40


Disconnect Switches


15149 SeriesSpecifications

Description: Fused, dead front disconnect switches

Ratings:

Volts: — 600Vac

Amps: — 0-30A

SCCR: — 200kA RMS Sym.

Dielectric SCCR: 2200V

Motor Rating: 5Hp

Poles: 2 to 3

Agency Information: UL Recognized, file E120756 forGeneral Industrial installations. Guide WGEU2. CSA certified, file LR37129-6. Examined under the new proposedstandard UL 1429 which imparts a stricter set of test conditions than the former program that combined the applicable portions for UL 512 (Fuse Holders) and UL 98(Enclosed Switches).

Features and Benefits• Fuse holders in the pull-out head eliminate possibility of

electric shock while changing fuse.• Accepts Class J fuses

Ordering InformationTo order, specify: 15149 + number of poles.Example: 15149-2 = 2-pole device.

Flexibility and Convenience Make Point-of-Use Configuration Easy

Full range of open disconnect switches withversatile options and accessories that shipwithin 24 hours

www.cooperbussmann.com

Fused, Dead Front Disconnect Switches

™


Documents

Bussmann Full Line Catalog # 1007 - Disconnect …See data sheet 9000 for CUBEFuse specifications. **For fuse performance under or above 25ºC, consult fuse performance derating charts