Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
11
business. Styling that’s unsurpassed in itswill make you proud you made the correctseries lift trucks. Built for you. Built to last.
It’s a new truck for the new age. The unique S70-120XM series handles loads that range from
7,000 to 12,000 lbs. with ease, even in those tight spaces. This
series raises the bar of its long-standing SpaceSaver® heritage to
a new standard. Behind its sleek styling lurks the power and control to
take your operation’s capabilities to their next plateau. The S70-120XM
trucks’ operator compartment will get you there in comfort with all
the conveniences you expect from the industry leader. Best of all,
the authoritative GM 4.3 liter LPG or gas engines and the
powerful Perkins 1004 diesel will motivate your productivity.
Hyster CompanyP.O. Box 7006Greenville, North Carolina27835-7006
Part No. S7-120XM/B11/2003 Litho in U.S.A.
TA K E I T T O E X T R E M E S .
Visit us on our website: www.hysterusa.com
Standard equipment:S70-80XMUnique items include:• 22 x 9 x 16 Drive tires(S70XM)
• 18 x 6 x 12.1 Steer tires(S70XM)
• 22 x 9 x 16 Drive tires(S80XM)
• 18 x 7 x 12.1 Steer tires(S80XM)
• Class III carriage
• Cast counterweight
S80-100XM-BCSUnique items include:• 22 x 9 x 16 Drive tires(S80XM-BCS)
• 22 x 12 x 16 Drive tires(S100XM-BCS)
• 18 x 7 x 12.1 Steer tires(S80XM-BCS)
• 18 x 8 x 12.1 Steer tires(S100XM-BCS)
• Class III carriage(S80XM-BCS)
• Class IV carriage(S100XM-BCS)
• Steel counterweight/lead filled
S100-120XMUnique items include:• 22 x 12 x 16 Drive tires
• 18 x 8 x 12.1 Steer tires
• Class IV carriage
• Cast counterweight
S120XMSUnique items include:• 22 x 12 x 16 Drive tires
• 18 x 8 x 12.1 Steer tires
• Class IV carriage
• Steel counterweight/lead filled
S120XM-PRS Unique items include:• 22 x 12 x 16 Drive tires • 18 x 8 x 12.1 Steer tires • Class IV carriage • Steel counterweight/lead filled • Accumulator• Carriage side thrust bearing group
Common equipment includes:• GM 4.3 liter LPG engine with fixed LPG bracket • Powertrain protection system • Operator restraint system
• Single-speed powershift transmission • MONOTROL® pedal • 3-Function hydraulic control valve and hose group
• Tilt steering wheel • Counterweight exhaust • Air cleaner • Operator’s manual • Non-suspension vinyl seat
• Single pedal inch/brake • 87.0” Overhead guard • 2 Brake lights/back-up lights • U.L. Classification LP.
When was the last time you gotmore than you bargained for?
You will, when you experience the Hyster S70-120XM series
of lift trucks. Designed to fit into those tight spaces where no one wants
to go. Built with the integrity of more than 70 years of experience in
materials handling. This series is the latest addition to the world’s only
true, full-line of ISO-9002 certified lift trucks: a Hyster Company
hallmark and proof of our commitment to
quality. What makes the S70-120XM
series so
exciting
is what
it will
enable
you to
do better.
Uncompromising in its productivity for yourclass. And a return on your investment thatdecision. It’s the all-new Hyster S70-120XM
The SpaceSaverseries’ legendary lineage continues in the S70-120XM.It stands and delivers outstandingvisibility, serviceability and maneuverabilityto make it the new industry standard in durable, reliable and versatile materials handling equipment.
Hyster, , VISTA, SpaceSaver and MONOTROL are registered trademarks of Hyster
Company. XM, XM2, XMT2, EZXchange and are trademarks of Hyster
Company. Hyster products are subject to change without notice.
Hyster Company uses recycled paper for its sales literature.
2
S70_120XM_gate 1/16/04 10:38 AM Page 1
11
business. Styling that’s unsurpassed in itswill make you proud you made the correctseries lift trucks. Built for you. Built to last.
It’s a new truck for the new age. The unique S70-120XM series handles loads that range from
7,000 to 12,000 lbs. with ease, even in those tight spaces. This
series raises the bar of its long-standing SpaceSaver® heritage to
a new standard. Behind its sleek styling lurks the power and control to
take your operation’s capabilities to their next plateau. The S70-120XM
trucks’ operator compartment will get you there in comfort with all
the conveniences you expect from the industry leader. Best of all,
the authoritative GM 4.3 liter LPG or gas engines and the
powerful Perkins 1004 diesel will motivate your productivity.
Hyster CompanyP.O. Box 7006Greenville, North Carolina27835-7006
Part No. S7-120XM/B11/2003 Litho in U.S.A.
TA K E I T T O E X T R E M E S .
Visit us on our website: www.hysterusa.com
Standard equipment:S70-80XMUnique items include:• 22 x 9 x 16 Drive tires(S70XM)
• 18 x 6 x 12.1 Steer tires(S70XM)
• 22 x 9 x 16 Drive tires(S80XM)
• 18 x 7 x 12.1 Steer tires(S80XM)
• Class III carriage
• Cast counterweight
S80-100XM-BCSUnique items include:• 22 x 9 x 16 Drive tires(S80XM-BCS)
• 22 x 12 x 16 Drive tires(S100XM-BCS)
• 18 x 7 x 12.1 Steer tires(S80XM-BCS)
• 18 x 8 x 12.1 Steer tires(S100XM-BCS)
• Class III carriage(S80XM-BCS)
• Class IV carriage(S100XM-BCS)
• Steel counterweight/lead filled
S100-120XMUnique items include:• 22 x 12 x 16 Drive tires
• 18 x 8 x 12.1 Steer tires
• Class IV carriage
• Cast counterweight
S120XMSUnique items include:• 22 x 12 x 16 Drive tires
• 18 x 8 x 12.1 Steer tires
• Class IV carriage
• Steel counterweight/lead filled
S120XM-PRS Unique items include:• 22 x 12 x 16 Drive tires • 18 x 8 x 12.1 Steer tires • Class IV carriage • Steel counterweight/lead filled • Accumulator• Carriage side thrust bearing group
Common equipment includes:• GM 4.3 liter LPG engine with fixed LPG bracket • Powertrain protection system • Operator restraint system
• Single-speed powershift transmission • MONOTROL® pedal • 3-Function hydraulic control valve and hose group
• Tilt steering wheel • Counterweight exhaust • Air cleaner • Operator’s manual • Non-suspension vinyl seat
• Single pedal inch/brake • 87.0” Overhead guard • 2 Brake lights/back-up lights • U.L. Classification LP.
When was the last time you gotmore than you bargained for?
You will, when you experience the Hyster S70-120XM series
of lift trucks. Designed to fit into those tight spaces where no one wants
to go. Built with the integrity of more than 70 years of experience in
materials handling. This series is the latest addition to the world’s only
true, full-line of ISO-9002 certified lift trucks: a Hyster Company
hallmark and proof of our commitment to
quality. What makes the S70-120XM
series so
exciting
is what
it will
enable
you to
do better.
Uncompromising in its productivity for yourclass. And a return on your investment thatdecision. It’s the all-new Hyster S70-120XM
The SpaceSaverseries’ legendary lineage continues in the S70-120XM.It stands and delivers outstandingvisibility, serviceability and maneuverabilityto make it the new industry standard in durable, reliable and versatile materials handling equipment.
Hyster, , VISTA, SpaceSaver and MONOTROL are registered trademarks of Hyster
Company. XM, XM2, XMT2, EZXchange and are trademarks of Hyster
Company. Hyster products are subject to change without notice.
Hyster Company uses recycled paper for its sales literature.
2
S70_120XM_gate 1/16/04 10:38 AM Page 1
wheel to face of forks) improving your lifting
capacity and overall maneuverability. Now that
you can get a 5th-function as an available
option, the sky’s the limit on your productivity.
The brake system now has a vacuum booster,
affording you low pedal effort when braking. An
in-tank hydraulic oil filter significantly increases filtration and
serviceability. And the S70-120XM series’ control valve has priority
(steering) flow built-in, for excellent maneuverability at low and idle
speeds. Best of all, by repositioning the hydraulic valve and bracket, you have
easier access to the spark plugs and the valve itself. The S70-120XM
series is designed with your operations needs in mind -- capacity, uptime,
operator comfort and simple serviceability.
When configured for paper-rollhandling, the S120XM trucksets the industry standard.Its siblings, the S120XMS or the S120XMS-PRS (Paper RollSpecial) has a lead filled, steelcounterweight that shortens itslength by an amazing 7.9 inches.So, you get the industry’s bestturning radius with the industry’sgreatest lifting capacity.A definitewin, win situation for your paper-roll handling operations.(Truck shownwith optionalbrake lightswith back-up lights).
The S120XMS-PRS comes equipped with an accumulator and carriageside thrust bearing group asstandard equipment, to assist in giving you a smooth ride all day long.
One small step up. One giant leap forward.
You can readily see that getting on and off of the new S70-120XM
series is easier than ever before. The single, large open non-slip
step and two natural grip
points (the seat armrest and
molded handgrip) make entry and
egress natural and almost second
nature. The hydraulic linkage and
tilt cylinders are out of sight, giving
uncluttered leg and foot room
that will save on your own wear and
tear. The five position tilt steering
column and hydraulically assisted steering gives personalized handling
at its best. You won’t be going in circles, because the steering wheel
goes lock to lock in 4.4 turns.
Often duplicated, never equaled.Hyster Company’s exclusive MONOTROL®
Pedal has proven to be a favorite with customers
for a number of reasons. Maybe it’s the ease of
operation, or the one-touch hands free
control of travel direction. Whatever the
reason, you’ll want to make sure that a MONOTROL
Pedal is on your new S70-120XM series trucks, to
maximize your operation’s productivity.
The S80XM-BCS(Boxcar Special)pictured at left,provides youunparalleledmaneuverabilityto handle multiplejob tasks. Evenwhen equippedwith the optionaldirection controllever.
On a clear day. On any day.Your view from the operator’s seat of your new Hyster S70-120XM
is about as clear as you
can get. Easy to read
at-a-glance gauges, service
indicator lights and a new
state-of-the-art LCD display
for status codes keep you
informed on the vital func-
tions of the truck. What’s
more, the panoramic
view through the Hyster
exclusive VISTA® mast gives you the load handling confidence that
comes with the industry’s best all-around visibility. At every pick
up or delivery of a load to its final destination, the
S70-120XM series’ brakes give you positive
and consistent stopping. They also provide
superb inching capabilities for those
times when you really need the extra
control.
This SpaceSaver series’ has a built-in
storage compartment within easy reach
that will hold a clipboard, tape roll, gloves,
and even a marker or two. You could say,
the entire operator compartment is
designed with you in mind. After
all, you’ll spend more time driving this
lift truck series than your own automobile.
Service, easy as a breeze.No one likes to admit any lift truck needs service. But all lift trucks
eventually do, so you need assurance that it can be done easily. Even
more reason to prefer the new S70-120XM series of lift trucks. Their
unsurpassed service accessibility puts you just seconds away
from the truck’s inner workings. The air-spring assisted hood opens
easily with just one pull of the handle. And the S70-120XM series’
unique lower swing-out, detachable doors and battery tray
afford you 90 degree access to
the engine, from either side.
In addition, a maintenance-free
battery and only twelve
grease fittings keep
daily service
checks very
short.
Removable floorplate on the S70-120XM series’ providesyou unencumbered access to the transmission filter, plus themain transmission control valve. A new spin-on transmissionfilter gives you ‘quick change’ capabilities.
The S70-120XMseries’ gas springassisted hoodopens completely,making servicechecks simple.With its uniquedetachable, 90degree swing-outdoors, changingthe air filter is just
as easy. Tracing the color coded and taggedwiring is a breeze. Back-lighted serviceindicator lights on the new dash display notifyyou visually when service is required onthe S70-120XM. The service indicatorlights on the standard instrument displayare: alternator warning; engine oil pressure;service transmission; service engine; coolanttemperature; fasten seat belt; coolant level;brake fluid level and transmission oil temperature.
A front-end thatdefines lift truck.
Nothing works harder than your
lift truck’s front-end equipment.
The trunnion mounted Hyster
Company exclusive VISTA® mast
provides you superior life and
high-load carrying capacity
with stress-tested, hot rolled steel
channels. Its pre-lubed and sealed,
full-radiused, canted load rollers
resist stresses giving you exceptional
load support when lifting or lowering materials. Every VISTA mast is
precision manufactured for greater reliability. In addition, the
S70-120XM series standard, hook-type carriage’s top and bottom
bar optimize your visibility. What’s more, Hyster Company is the
first to offer an optional integral side-shift in a Class III
and IV carriage. You’ll love the fact that it is more compact giving
you a shorter lost-load-center (distance from center of drive axle or
The rigid steel VISTA
mast and its powerful
hydraulic system’s
cushioning, smoothes
mast transition during
lifting and lowering,
giving you the strength
and control to move
loads with increased
confidence. And with
this series’ grid-style
overhead guard, you’ll
have enhanced visibility
when you’re working at
extended lift heights.
Making a good connection.Hyster Company engineers want you to stay connected at all times.
That’s why the S70-120XM truck’s wiring is tagged and color
coded. With only three wiring harnesses, the power distribution module
and sealed or soldered wire connections to the instrument cluster’s micro-
processor and circuit boards, you stay up and running far longer.
What’s more, an automatic ‘shut down’ feature continuously
monitors the S70-120XM truck’s engine oil pressure in addition to its
engine and transmission fluid temperatures. At predetermined levels, you’ll
get a warning sound 45 seconds before it shuts down the engine. You just
protected your engine from potential serious damage, lengthening its life.
3 109
Close to the action . . .
Far from those productivity robbing vibrations.
The engine is a primary source of vibration. We specially-
designed a rigid isolating mounting system featuring armored
elastomer engine mounts that react differently to varying engine
load levels. This helps to lessen vibration and noise at the source. A
tight hood seal with a 2-inch thick, sound absorbing pad and a snug fit
rubber floor mat maximizes noise suppression. And we isolated
the exhaust system to further reduce noise for quieter operation.
S70_120XM_gate 1/16/04 10:38 AM Page 2
wheel to face of forks) improving your lifting
capacity and overall maneuverability. Now that
you can get a 5th-function as an available
option, the sky’s the limit on your productivity.
The brake system now has a vacuum booster,
affording you low pedal effort when braking. An
in-tank hydraulic oil filter significantly increases filtration and
serviceability. And the S70-120XM series’ control valve has priority
(steering) flow built-in, for excellent maneuverability at low and idle
speeds. Best of all, by repositioning the hydraulic valve and bracket, you have
easier access to the spark plugs and the valve itself. The S70-120XM
series is designed with your operations needs in mind -- capacity, uptime,
operator comfort and simple serviceability.
When configured for paper-rollhandling, the S120XM trucksets the industry standard.Its siblings, the S120XMS or the S120XMS-PRS (Paper RollSpecial) has a lead filled, steelcounterweight that shortens itslength by an amazing 7.9 inches.So, you get the industry’s bestturning radius with the industry’sgreatest lifting capacity.A definitewin, win situation for your paper-roll handling operations.(Truck shownwith optionalbrake lightswith back-up lights).
The S120XMS-PRS comes equipped with an accumulator and carriageside thrust bearing group asstandard equipment, to assist in giving you a smooth ride all day long.
One small step up. One giant leap forward.
You can readily see that getting on and off of the new S70-120XM
series is easier than ever before. The single, large open non-slip
step and two natural grip
points (the seat armrest and
molded handgrip) make entry and
egress natural and almost second
nature. The hydraulic linkage and
tilt cylinders are out of sight, giving
uncluttered leg and foot room
that will save on your own wear and
tear. The five position tilt steering
column and hydraulically assisted steering gives personalized handling
at its best. You won’t be going in circles, because the steering wheel
goes lock to lock in 4.4 turns.
Often duplicated, never equaled.Hyster Company’s exclusive MONOTROL®
Pedal has proven to be a favorite with customers
for a number of reasons. Maybe it’s the ease of
operation, or the one-touch hands free
control of travel direction. Whatever the
reason, you’ll want to make sure that a MONOTROL
Pedal is on your new S70-120XM series trucks, to
maximize your operation’s productivity.
The S80XM-BCS(Boxcar Special)pictured at left,provides youunparalleledmaneuverabilityto handle multiplejob tasks. Evenwhen equippedwith the optionaldirection controllever.
On a clear day. On any day.Your view from the operator’s seat of your new Hyster S70-120XM
is about as clear as you
can get. Easy to read
at-a-glance gauges, service
indicator lights and a new
state-of-the-art LCD display
for status codes keep you
informed on the vital func-
tions of the truck. What’s
more, the panoramic
view through the Hyster
exclusive VISTA® mast gives you the load handling confidence that
comes with the industry’s best all-around visibility. At every pick
up or delivery of a load to its final destination, the
S70-120XM series’ brakes give you positive
and consistent stopping. They also provide
superb inching capabilities for those
times when you really need the extra
control.
This SpaceSaver series’ has a built-in
storage compartment within easy reach
that will hold a clipboard, tape roll, gloves,
and even a marker or two. You could say,
the entire operator compartment is
designed with you in mind. After
all, you’ll spend more time driving this
lift truck series than your own automobile.
Service, easy as a breeze.No one likes to admit any lift truck needs service. But all lift trucks
eventually do, so you need assurance that it can be done easily. Even
more reason to prefer the new S70-120XM series of lift trucks. Their
unsurpassed service accessibility puts you just seconds away
from the truck’s inner workings. The air-spring assisted hood opens
easily with just one pull of the handle. And the S70-120XM series’
unique lower swing-out, detachable doors and battery tray
afford you 90 degree access to
the engine, from either side.
In addition, a maintenance-free
battery and only twelve
grease fittings keep
daily service
checks very
short.
Removable floorplate on the S70-120XM series’ providesyou unencumbered access to the transmission filter, plus themain transmission control valve. A new spin-on transmissionfilter gives you ‘quick change’ capabilities.
The S70-120XMseries’ gas springassisted hoodopens completely,making servicechecks simple.With its uniquedetachable, 90degree swing-outdoors, changingthe air filter is just
as easy. Tracing the color coded and taggedwiring is a breeze. Back-lighted serviceindicator lights on the new dash display notifyyou visually when service is required onthe S70-120XM. The service indicatorlights on the standard instrument displayare: alternator warning; engine oil pressure;service transmission; service engine; coolanttemperature; fasten seat belt; coolant level;brake fluid level and transmission oil temperature.
A front-end thatdefines lift truck.
Nothing works harder than your
lift truck’s front-end equipment.
The trunnion mounted Hyster
Company exclusive VISTA® mast
provides you superior life and
high-load carrying capacity
with stress-tested, hot rolled steel
channels. Its pre-lubed and sealed,
full-radiused, canted load rollers
resist stresses giving you exceptional
load support when lifting or lowering materials. Every VISTA mast is
precision manufactured for greater reliability. In addition, the
S70-120XM series standard, hook-type carriage’s top and bottom
bar optimize your visibility. What’s more, Hyster Company is the
first to offer an optional integral side-shift in a Class III
and IV carriage. You’ll love the fact that it is more compact giving
you a shorter lost-load-center (distance from center of drive axle or
The rigid steel VISTA
mast and its powerful
hydraulic system’s
cushioning, smoothes
mast transition during
lifting and lowering,
giving you the strength
and control to move
loads with increased
confidence. And with
this series’ grid-style
overhead guard, you’ll
have enhanced visibility
when you’re working at
extended lift heights.
Making a good connection.Hyster Company engineers want you to stay connected at all times.
That’s why the S70-120XM truck’s wiring is tagged and color
coded. With only three wiring harnesses, the power distribution module
and sealed or soldered wire connections to the instrument cluster’s micro-
processor and circuit boards, you stay up and running far longer.
What’s more, an automatic ‘shut down’ feature continuously
monitors the S70-120XM truck’s engine oil pressure in addition to its
engine and transmission fluid temperatures. At predetermined levels, you’ll
get a warning sound 45 seconds before it shuts down the engine. You just
protected your engine from potential serious damage, lengthening its life.
3 109
Close to the action . . .
Far from those productivity robbing vibrations.
The engine is a primary source of vibration. We specially-
designed a rigid isolating mounting system featuring armored
elastomer engine mounts that react differently to varying engine
load levels. This helps to lessen vibration and noise at the source. A
tight hood seal with a 2-inch thick, sound absorbing pad and a snug fit
rubber floor mat maximizes noise suppression. And we isolated
the exhaust system to further reduce noise for quieter operation.
S70_120XM_gate 1/16/04 10:38 AM Page 2
It’s as if a weight has been lifted.Literally! Hyster Company’s new optional EZXchange™
LP tank bracket makes change-outs easier
and quicker minimizing your
down-time, amongst other things.
The EZXchange™ bracket takes
the heavy work of swiveling
an LP tank into an optimized
location for easy replace-
ment, out of the equation.
A gentle push downward,
makes the EZXchange™
bracket’s gas-spring assisted
cylinders lower the LP tank
into a locked and lowered
position. The bracket’s natural
reclining location ensures a secure
and stabile platform, whether you
are removing an empty or placing a full LP tank.
Once you’ve secured the tank with the bracket’s
strap, another gentle tug on the tank’s bottom edge initiates the
gas-spring cylinders to lift the tank up. Then it’s a matter of
simply swiveling the tank around back into its locked position.
So, if you’re looking to simplify LP tank change-outs, increase
productivity and minimize down-time the
S70-120XM SpaceSaver series
of lift truck is your best choice.
Reward productivity.Hyster Company’s full-suspension seat
(optional) smooths out most concrete seams
and cracks, uneven dock plates or aisle-way
debris your operator comes into contact
with. This seat’s carriage design provides a
larger area for moving up and down to isolate
road-born shocks and vibrations. The seat back
reclines independent of the seat cushion, giving you a more tailored
position for increased comfort. The dual integral armrests/hip restraints provide excellent
arm or hand hold to minimize torso strain when operating in the rearward position. Best of all,
the safety restraint system stops you from being ‘cinched’, unlike other hood mounted seats.
Some lift trucks in this
brochure are pictured with
options that may be available
at extra cost or may not be
available on some models
within the series. Contact
your local authorized Hyster
Dealer about the availability
of options, and verify that
the lift truck you’ve
ordered includes the
equipment
you ordered.
5
S70_120XM_in 1/16/04 10:43 AM Page 5
GM 4.3 liter V-6 LPG. Its high energy direct-fire ignition turns over
the electronic-governed, throttle-body injected (TBI) 6-cylinder, to give
you 262 cubic inches of displacement. Managed by the TBI,
all that raw power provides you responsiveness, fuel eonomy, and
best of all - uncompromised
lugging power. All these
excellent attributes are also
available in the optional
gas version of the GM 4.3
liter engine.
If you prefer diesel,
the stout Perkins 1104,
4.4 liter, 4-cylinder engine
is an alternate choice.
Its direct injection system
optimizes fuel/air
mixture, maximizing
torque and performance
while minimizing emissions.
What’s more, the Perkins
diesel’s cast iron block
and head ensure
durability and
quieter running. All
2004 engines are EPA
emissions compliant. A
potent combination - from
the leader in the industry-
Hyster Company.
Your trusty new ‘steed’.Whether it’s pure lugging power, fuel efficiency or productivity
you’re looking for, the S70-120XM series has it all. And then some.
The chilling combination of a 20-inch pusher-type fan and
the Hyster Company Beta-Weld Square Wave radiator
(with 25 percent more surface area) dissipates heat quicker, giving your
S70-120XM trucks the cool relief needed in harsh applications.
An optional lint screen and shroud is available, to further minimize
debris from collecting in the radiator. This provides you the total
proactive solution to maximize your S70-120XM truck’s uptime.
Reliability, is built into the S70-120XM series standard engine, the
Two can be better than one. The S70-120XM series has an optional
two-pedal brake configuration for enhanced load handling on grades.
One pedal is located on either side of the steering column. The left-hand
side pedal provides you braking and inching capabilities by partially disengaging
the transmission clutch packs. Fully depressing this pedal engages the brakes.
The “brake pedal” is positioned on the right-hand side of the column.
All-around visibility
is the hallmark of
the Hyster exclusive
VISTA® mast. It is
what gives you
greater operating
confidence and
control, increasing
your productivity.
6
S70_120XM_in 1/16/04 10:43 AM Page 6
One track mind.Getting the job done quickly and efficiently. The S70-120XM
SpaceSaver series’ single-speed transmission was designed
by Hyster Company, and assembled by craftsmen. Its cool filtered
oil bathed, clutch pack and built-in pressure regulator provides
you precise, smooth
shifting every time.
Your only real choice is
whether you want your
trucks to operate as
an automatic (with the
MONOTROL® pedal
(standard equipment)),
or as a manual shift with
the optional directional
control lever.
Heavy load handling made easy. The S70-120XM series’ cast steer and
drive axles are built to withstand the most rigorous duty cycles, day
after day. What’s more, the power-assisted hydrostatic steering allows
these SpaceSaver® trucks to maneuver sharply and responsively.
The S70-120XM series’ 4-position tilt steer column makes for comfortable
driving. The contoured release lets you choose your preferred setting.
Heritage has its privileges.
Hyster Company’s exclusive hydrostatic
steering system is the ‘ironman’ of the lift truck industry. Virtually
maintenance-free, the hydrostatic steer axle’s hydraulic linkage
between the axle and steering wheel eliminates the mechanical linkage
in other units - enhancing the reliability and maneuverability
of the S70-120XM series. Supported by pre-loaded, prelubed, and
tapered roller bearings, durable wheel spindles provide straight tracking
via fixed length tie-rods, and eliminates periodic adjustments.
7
S70_120XM_in 1/16/04 10:43 AM Page 7
8
Your local Hyster
dealer is your best
friend when it comes
to materials handling.
They bring you the
for your company.
Financial solutions
thru Hyster Capital,
operator training,
parts and service
support 24/7. But it
doesn’t stop there. If
you have a mixed fleet
of trucks, they can
take care of servicing
them too. With the
‘Everyday Low Pricing’
of UNISOURCE™
parts, you can get first
of
more than 21 brands
of competitive lift
trucks. Anyone can
sell you a lift truck and
make promises. But
only your authorized
Hyster dealer will be
there to back it up.
S70_120XM_in 1/16/04 10:43 AM Page 8
wheel to face of forks) improving your lifting
capacity and overall maneuverability. Now that
you can get a 5th-function as an available
option, the sky’s the limit on your productivity.
The brake system now has a vacuum booster,
affording you low pedal effort when braking. An
in-tank hydraulic oil filter significantly increases filtration and
serviceability. And the S70-120XM series’ control valve has priority
(steering) flow built-in, for excellent maneuverability at low and idle
speeds. Best of all, by repositioning the hydraulic valve and bracket, you have
easier access to the spark plugs and the valve itself. The S70-120XM
series is designed with your operations needs in mind -- capacity, uptime,
operator comfort and simple serviceability.
When configured for paper-rollhandling, the S120XM trucksets the industry standard.Its siblings, the S120XMS or the S120XMS-PRS (Paper RollSpecial) has a lead filled, steelcounterweight that shortens itslength by an amazing 7.9 inches.So, you get the industry’s bestturning radius with the industry’sgreatest lifting capacity.A definitewin, win situation for your paper-roll handling operations.(Truck shownwith optionalbrake lightswith back-up lights).
The S120XMS-PRS comes equipped with an accumulator and carriageside thrust bearing group asstandard equipment, to assist in giving you a smooth ride all day long.
One small step up. One giant leap forward.
You can readily see that getting on and off of the new S70-120XM
series is easier than ever before. The single, large open non-slip
step and two natural grip
points (the seat armrest and
molded handgrip) make entry and
egress natural and almost second
nature. The hydraulic linkage and
tilt cylinders are out of sight, giving
uncluttered leg and foot room
that will save on your own wear and
tear. The five position tilt steering
column and hydraulically assisted steering gives personalized handling
at its best. You won’t be going in circles, because the steering wheel
goes lock to lock in 4.4 turns.
Often duplicated, never equaled.Hyster Company’s exclusive MONOTROL®
Pedal has proven to be a favorite with customers
for a number of reasons. Maybe it’s the ease of
operation, or the one-touch hands free
control of travel direction. Whatever the
reason, you’ll want to make sure that a MONOTROL
Pedal is on your new S70-120XM series trucks, to
maximize your operation’s productivity.
The S80XM-BCS(Boxcar Special)pictured at left,provides youunparalleledmaneuverabilityto handle multiplejob tasks. Evenwhen equippedwith the optionaldirection controllever.
On a clear day. On any day.Your view from the operator’s seat of your new Hyster S70-120XM
is about as clear as you
can get. Easy to read
at-a-glance gauges, service
indicator lights and a new
state-of-the-art LCD display
for status codes keep you
informed on the vital func-
tions of the truck. What’s
more, the panoramic
view through the Hyster
exclusive VISTA® mast gives you the load handling confidence that
comes with the industry’s best all-around visibility. At every pick
up or delivery of a load to its final destination, the
S70-120XM series’ brakes give you positive
and consistent stopping. They also provide
superb inching capabilities for those
times when you really need the extra
control.
This SpaceSaver series’ has a built-in
storage compartment within easy reach
that will hold a clipboard, tape roll, gloves,
and even a marker or two. You could say,
the entire operator compartment is
designed with you in mind. After
all, you’ll spend more time driving this
lift truck series than your own automobile.
Service, easy as a breeze.No one likes to admit any lift truck needs service. But all lift trucks
eventually do, so you need assurance that it can be done easily. Even
more reason to prefer the new S70-120XM series of lift trucks. Their
unsurpassed service accessibility puts you just seconds away
from the truck’s inner workings. The air-spring assisted hood opens
easily with just one pull of the handle. And the S70-120XM series’
unique lower swing-out, detachable doors and battery tray
afford you 90 degree access to
the engine, from either side.
In addition, a maintenance-free
battery and only twelve
grease fittings keep
daily service
checks very
short.
Removable floorplate on the S70-120XM series’ providesyou unencumbered access to the transmission filter, plus themain transmission control valve. A new spin-on transmissionfilter gives you ‘quick change’ capabilities.
The S70-120XMseries’ gas springassisted hoodopens completely,making servicechecks simple.With its uniquedetachable, 90degree swing-outdoors, changingthe air filter is just
as easy. Tracing the color coded and taggedwiring is a breeze. Back-lighted serviceindicator lights on the new dash display notifyyou visually when service is required onthe S70-120XM. The service indicatorlights on the standard instrument displayare: alternator warning; engine oil pressure;service transmission; service engine; coolanttemperature; fasten seat belt; coolant level;brake fluid level and transmission oil temperature.
A front-end thatdefines lift truck.
Nothing works harder than your
lift truck’s front-end equipment.
The trunnion mounted Hyster
Company exclusive VISTA® mast
provides you superior life and
high-load carrying capacity
with stress-tested, hot rolled steel
channels. Its pre-lubed and sealed,
full-radiused, canted load rollers
resist stresses giving you exceptional
load support when lifting or lowering materials. Every VISTA mast is
precision manufactured for greater reliability. In addition, the
S70-120XM series standard, hook-type carriage’s top and bottom
bar optimize your visibility. What’s more, Hyster Company is the
first to offer an optional integral side-shift in a Class III
and IV carriage. You’ll love the fact that it is more compact giving
you a shorter lost-load-center (distance from center of drive axle or
The rigid steel VISTA
mast and its powerful
hydraulic system’s
cushioning, smoothes
mast transition during
lifting and lowering,
giving you the strength
and control to move
loads with increased
confidence. And with
this series’ grid-style
overhead guard, you’ll
have enhanced visibility
when you’re working at
extended lift heights.
Making a good connection.Hyster Company engineers want you to stay connected at all times.
That’s why the S70-120XM truck’s wiring is tagged and color
coded. With only three wiring harnesses, the power distribution module
and sealed or soldered wire connections to the instrument cluster’s micro-
processor and circuit boards, you stay up and running far longer.
What’s more, an automatic ‘shut down’ feature continuously
monitors the S70-120XM truck’s engine oil pressure in addition to its
engine and transmission fluid temperatures. At predetermined levels, you’ll
get a warning sound 45 seconds before it shuts down the engine. You just
protected your engine from potential serious damage, lengthening its life.
3 109
Close to the action . . .
Far from those productivity robbing vibrations.
The engine is a primary source of vibration. We specially-
designed a rigid isolating mounting system featuring armored
elastomer engine mounts that react differently to varying engine
load levels. This helps to lessen vibration and noise at the source. A
tight hood seal with a 2-inch thick, sound absorbing pad and a snug fit
rubber floor mat maximizes noise suppression. And we isolated
the exhaust system to further reduce noise for quieter operation.
S70_120XM_gate 1/16/04 10:38 AM Page 2
wheel to face of forks) improving your lifting
capacity and overall maneuverability. Now that
you can get a 5th-function as an available
option, the sky’s the limit on your productivity.
The brake system now has a vacuum booster,
affording you low pedal effort when braking. An
in-tank hydraulic oil filter significantly increases filtration and
serviceability. And the S70-120XM series’ control valve has priority
(steering) flow built-in, for excellent maneuverability at low and idle
speeds. Best of all, by repositioning the hydraulic valve and bracket, you have
easier access to the spark plugs and the valve itself. The S70-120XM
series is designed with your operations needs in mind -- capacity, uptime,
operator comfort and simple serviceability.
When configured for paper-rollhandling, the S120XM trucksets the industry standard.Its siblings, the S120XMS or the S120XMS-PRS (Paper RollSpecial) has a lead filled, steelcounterweight that shortens itslength by an amazing 7.9 inches.So, you get the industry’s bestturning radius with the industry’sgreatest lifting capacity.A definitewin, win situation for your paper-roll handling operations.(Truck shownwith optionalbrake lightswith back-up lights).
The S120XMS-PRS comes equipped with an accumulator and carriageside thrust bearing group asstandard equipment, to assist in giving you a smooth ride all day long.
One small step up. One giant leap forward.
You can readily see that getting on and off of the new S70-120XM
series is easier than ever before. The single, large open non-slip
step and two natural grip
points (the seat armrest and
molded handgrip) make entry and
egress natural and almost second
nature. The hydraulic linkage and
tilt cylinders are out of sight, giving
uncluttered leg and foot room
that will save on your own wear and
tear. The five position tilt steering
column and hydraulically assisted steering gives personalized handling
at its best. You won’t be going in circles, because the steering wheel
goes lock to lock in 4.4 turns.
Often duplicated, never equaled.Hyster Company’s exclusive MONOTROL®
Pedal has proven to be a favorite with customers
for a number of reasons. Maybe it’s the ease of
operation, or the one-touch hands free
control of travel direction. Whatever the
reason, you’ll want to make sure that a MONOTROL
Pedal is on your new S70-120XM series trucks, to
maximize your operation’s productivity.
The S80XM-BCS(Boxcar Special)pictured at left,provides youunparalleledmaneuverabilityto handle multiplejob tasks. Evenwhen equippedwith the optionaldirection controllever.
On a clear day. On any day.Your view from the operator’s seat of your new Hyster S70-120XM
is about as clear as you
can get. Easy to read
at-a-glance gauges, service
indicator lights and a new
state-of-the-art LCD display
for status codes keep you
informed on the vital func-
tions of the truck. What’s
more, the panoramic
view through the Hyster
exclusive VISTA® mast gives you the load handling confidence that
comes with the industry’s best all-around visibility. At every pick
up or delivery of a load to its final destination, the
S70-120XM series’ brakes give you positive
and consistent stopping. They also provide
superb inching capabilities for those
times when you really need the extra
control.
This SpaceSaver series’ has a built-in
storage compartment within easy reach
that will hold a clipboard, tape roll, gloves,
and even a marker or two. You could say,
the entire operator compartment is
designed with you in mind. After
all, you’ll spend more time driving this
lift truck series than your own automobile.
Service, easy as a breeze.No one likes to admit any lift truck needs service. But all lift trucks
eventually do, so you need assurance that it can be done easily. Even
more reason to prefer the new S70-120XM series of lift trucks. Their
unsurpassed service accessibility puts you just seconds away
from the truck’s inner workings. The air-spring assisted hood opens
easily with just one pull of the handle. And the S70-120XM series’
unique lower swing-out, detachable doors and battery tray
afford you 90 degree access to
the engine, from either side.
In addition, a maintenance-free
battery and only twelve
grease fittings keep
daily service
checks very
short.
Removable floorplate on the S70-120XM series’ providesyou unencumbered access to the transmission filter, plus themain transmission control valve. A new spin-on transmissionfilter gives you ‘quick change’ capabilities.
The S70-120XMseries’ gas springassisted hoodopens completely,making servicechecks simple.With its uniquedetachable, 90degree swing-outdoors, changingthe air filter is just
as easy. Tracing the color coded and taggedwiring is a breeze. Back-lighted serviceindicator lights on the new dash display notifyyou visually when service is required onthe S70-120XM. The service indicatorlights on the standard instrument displayare: alternator warning; engine oil pressure;service transmission; service engine; coolanttemperature; fasten seat belt; coolant level;brake fluid level and transmission oil temperature.
A front-end thatdefines lift truck.
Nothing works harder than your
lift truck’s front-end equipment.
The trunnion mounted Hyster
Company exclusive VISTA® mast
provides you superior life and
high-load carrying capacity
with stress-tested, hot rolled steel
channels. Its pre-lubed and sealed,
full-radiused, canted load rollers
resist stresses giving you exceptional
load support when lifting or lowering materials. Every VISTA mast is
precision manufactured for greater reliability. In addition, the
S70-120XM series standard, hook-type carriage’s top and bottom
bar optimize your visibility. What’s more, Hyster Company is the
first to offer an optional integral side-shift in a Class III
and IV carriage. You’ll love the fact that it is more compact giving
you a shorter lost-load-center (distance from center of drive axle or
The rigid steel VISTA
mast and its powerful
hydraulic system’s
cushioning, smoothes
mast transition during
lifting and lowering,
giving you the strength
and control to move
loads with increased
confidence. And with
this series’ grid-style
overhead guard, you’ll
have enhanced visibility
when you’re working at
extended lift heights.
Making a good connection.Hyster Company engineers want you to stay connected at all times.
That’s why the S70-120XM truck’s wiring is tagged and color
coded. With only three wiring harnesses, the power distribution module
and sealed or soldered wire connections to the instrument cluster’s micro-
processor and circuit boards, you stay up and running far longer.
What’s more, an automatic ‘shut down’ feature continuously
monitors the S70-120XM truck’s engine oil pressure in addition to its
engine and transmission fluid temperatures. At predetermined levels, you’ll
get a warning sound 45 seconds before it shuts down the engine. You just
protected your engine from potential serious damage, lengthening its life.
3 109
Close to the action . . .
Far from those productivity robbing vibrations.
The engine is a primary source of vibration. We specially-
designed a rigid isolating mounting system featuring armored
elastomer engine mounts that react differently to varying engine
load levels. This helps to lessen vibration and noise at the source. A
tight hood seal with a 2-inch thick, sound absorbing pad and a snug fit
rubber floor mat maximizes noise suppression. And we isolated
the exhaust system to further reduce noise for quieter operation.
S70_120XM_gate 1/16/04 10:38 AM Page 2
11
business. Styling that’s unsurpassed in itswill make you proud you made the correctseries lift trucks. Built for you. Built to last.
It’s a new truck for the new age. The unique S70-120XM series handles loads that range from
7,000 to 12,000 lbs. with ease, even in those tight spaces. This
series raises the bar of its long-standing SpaceSaver® heritage to
a new standard. Behind its sleek styling lurks the power and control to
take your operation’s capabilities to their next plateau. The S70-120XM
trucks’ operator compartment will get you there in comfort with all
the conveniences you expect from the industry leader. Best of all,
the authoritative GM 4.3 liter LPG or gas engines and the
powerful Perkins 1004 diesel will motivate your productivity.
Hyster CompanyP.O. Box 7006Greenville, North Carolina27835-7006
Part No. S7-120XM/B11/2003 Litho in U.S.A.
TA K E I T T O E X T R E M E S .
Visit us on our website: www.hysterusa.com
Standard equipment:S70-80XMUnique items include:• 22 x 9 x 16 Drive tires(S70XM)
• 18 x 6 x 12.1 Steer tires(S70XM)
• 22 x 9 x 16 Drive tires(S80XM)
• 18 x 7 x 12.1 Steer tires(S80XM)
• Class III carriage
• Cast counterweight
S80-100XM-BCSUnique items include:• 22 x 9 x 16 Drive tires(S80XM-BCS)
• 22 x 12 x 16 Drive tires(S100XM-BCS)
• 18 x 7 x 12.1 Steer tires(S80XM-BCS)
• 18 x 8 x 12.1 Steer tires(S100XM-BCS)
• Class III carriage(S80XM-BCS)
• Class IV carriage(S100XM-BCS)
• Steel counterweight/lead filled
S100-120XMUnique items include:• 22 x 12 x 16 Drive tires
• 18 x 8 x 12.1 Steer tires
• Class IV carriage
• Cast counterweight
S120XMSUnique items include:• 22 x 12 x 16 Drive tires
• 18 x 8 x 12.1 Steer tires
• Class IV carriage
• Steel counterweight/lead filled
S120XM-PRS Unique items include:• 22 x 12 x 16 Drive tires • 18 x 8 x 12.1 Steer tires • Class IV carriage • Steel counterweight/lead filled • Accumulator• Carriage side thrust bearing group
Common equipment includes:• GM 4.3 liter LPG engine with fixed LPG bracket • Powertrain protection system • Operator restraint system
• Single-speed powershift transmission • MONOTROL® pedal • 3-Function hydraulic control valve and hose group
• Tilt steering wheel • Counterweight exhaust • Air cleaner • Operator’s manual • Non-suspension vinyl seat
• Single pedal inch/brake • 87.0” Overhead guard • 2 Brake lights/back-up lights • U.L. Classification LP.
When was the last time you gotmore than you bargained for?
You will, when you experience the Hyster S70-120XM series
of lift trucks. Designed to fit into those tight spaces where no one wants
to go. Built with the integrity of more than 70 years of experience in
materials handling. This series is the latest addition to the world’s only
true, full-line of ISO-9002 certified lift trucks: a Hyster Company
hallmark and proof of our commitment to
quality. What makes the S70-120XM
series so
exciting
is what
it will
enable
you to
do better.
Uncompromising in its productivity for yourclass. And a return on your investment thatdecision. It’s the all-new Hyster S70-120XM
The SpaceSaverseries’ legendary lineage continues in the S70-120XM.It stands and delivers outstandingvisibility, serviceability and maneuverabilityto make it the new industry standard in durable, reliable and versatile materials handling equipment.
Hyster, , VISTA, SpaceSaver and MONOTROL are registered trademarks of Hyster
Company. XM, XM2, XMT2, EZXchange and are trademarks of Hyster
Company. Hyster products are subject to change without notice.
Hyster Company uses recycled paper for its sales literature.
2
S70_120XM_gate 1/16/04 10:38 AM Page 1
11
business. Styling that’s unsurpassed in itswill make you proud you made the correctseries lift trucks. Built for you. Built to last.
It’s a new truck for the new age. The unique S70-120XM series handles loads that range from
7,000 to 12,000 lbs. with ease, even in those tight spaces. This
series raises the bar of its long-standing SpaceSaver® heritage to
a new standard. Behind its sleek styling lurks the power and control to
take your operation’s capabilities to their next plateau. The S70-120XM
trucks’ operator compartment will get you there in comfort with all
the conveniences you expect from the industry leader. Best of all,
the authoritative GM 4.3 liter LPG or gas engines and the
powerful Perkins 1004 diesel will motivate your productivity.
Hyster CompanyP.O. Box 7006Greenville, North Carolina27835-7006
Part No. S7-120XM/B11/2003 Litho in U.S.A.
TA K E I T T O E X T R E M E S .
Visit us on our website: www.hysterusa.com
Standard equipment:S70-80XMUnique items include:• 22 x 9 x 16 Drive tires(S70XM)
• 18 x 6 x 12.1 Steer tires(S70XM)
• 22 x 9 x 16 Drive tires(S80XM)
• 18 x 7 x 12.1 Steer tires(S80XM)
• Class III carriage
• Cast counterweight
S80-100XM-BCSUnique items include:• 22 x 9 x 16 Drive tires(S80XM-BCS)
• 22 x 12 x 16 Drive tires(S100XM-BCS)
• 18 x 7 x 12.1 Steer tires(S80XM-BCS)
• 18 x 8 x 12.1 Steer tires(S100XM-BCS)
• Class III carriage(S80XM-BCS)
• Class IV carriage(S100XM-BCS)
• Steel counterweight/lead filled
S100-120XMUnique items include:• 22 x 12 x 16 Drive tires
• 18 x 8 x 12.1 Steer tires
• Class IV carriage
• Cast counterweight
S120XMSUnique items include:• 22 x 12 x 16 Drive tires
• 18 x 8 x 12.1 Steer tires
• Class IV carriage
• Steel counterweight/lead filled
S120XM-PRS Unique items include:• 22 x 12 x 16 Drive tires • 18 x 8 x 12.1 Steer tires • Class IV carriage • Steel counterweight/lead filled • Accumulator• Carriage side thrust bearing group
Common equipment includes:• GM 4.3 liter LPG engine with fixed LPG bracket • Powertrain protection system • Operator restraint system
• Single-speed powershift transmission • MONOTROL® pedal • 3-Function hydraulic control valve and hose group
• Tilt steering wheel • Counterweight exhaust • Air cleaner • Operator’s manual • Non-suspension vinyl seat
• Single pedal inch/brake • 87.0” Overhead guard • 2 Brake lights/back-up lights • U.L. Classification LP.
When was the last time you gotmore than you bargained for?
You will, when you experience the Hyster S70-120XM series
of lift trucks. Designed to fit into those tight spaces where no one wants
to go. Built with the integrity of more than 70 years of experience in
materials handling. This series is the latest addition to the world’s only
true, full-line of ISO-9002 certified lift trucks: a Hyster Company
hallmark and proof of our commitment to
quality. What makes the S70-120XM
series so
exciting
is what
it will
enable
you to
do better.
Uncompromising in its productivity for yourclass. And a return on your investment thatdecision. It’s the all-new Hyster S70-120XM
The SpaceSaverseries’ legendary lineage continues in the S70-120XM.It stands and delivers outstandingvisibility, serviceability and maneuverabilityto make it the new industry standard in durable, reliable and versatile materials handling equipment.
Hyster, , VISTA, SpaceSaver and MONOTROL are registered trademarks of Hyster
Company. XM, XM2, XMT2, EZXchange and are trademarks of Hyster
Company. Hyster products are subject to change without notice.
Hyster Company uses recycled paper for its sales literature.
2
S70_120XM_gate 1/16/04 10:38 AM Page 1