Upload
lehanh
View
217
Download
3
Embed Size (px)
Citation preview
04.17NEW PRODUCTS ANNOUNCEMENT
BUMPERS/SLIDERS/FENDERS/GRILLE
Year Description Part#
15-17 Ford F-150 M1- Front Bumper (max. winch 12,00lbs) 612833
15-17 Ford F-150 M1- Rear Bumper 614833
15-17 Ford F-150 M1- Side Sliders (Super Crew) 616833
15-17 Ford F-150 M1- Fender Flares 17395
15-17 Ford F-150 M1- Grille 615834
Winch Plate detail
M-1 BUMPERS FRONT/REAR• Innovative two-piece design (front)• Manufactured from 3/16" and 1/4" cold rolled steel • Engineered to fit and follow truck body• Ultra bright driving lights and fog lights included• Park assist and back up lights included (rear)• Solid mount D-rings - welds on the inside and out• Front bumper has a solid 1/4" plate center section
that wraps the frame horns and lower cross member • Built-in winch plate with one-piece welded design to accommodate up to 12,000lbs winch (winch sold separately)• Finished in the Signature Series matte black textured powder coat and stainless steel bezel accents
M-1 SLIDERS• Aggressive style. One piece design • Manufactured from 1.75" .120 wall tubing• Dual girder system provides the ultimate protection for the sides and under section of your truck• Provides protection and step at the same time• Bolts on without drilling or modifications to vehicle• Wheel-to-wheel for maximum protection• Each slider comes with 1/8" steel platform and dimple die steps for sure footed entry or exit• Dual purpose rear slider flare for added rear wheel protection • Rear kick out steps point to access front of bed • Finished in the Signature Series matte black textured powder coat
M-1 GRILLES• Complements the looks of your F-150• Manufactured out of marine grade 304 stainless steel• Stainless steel plated lugs• Finished in a textured black powder-coat• No exposed welds – robotically welded• Simple modifications to the OE grille shell required
M-1 FENDER FLARES • Rugged, off-road look• Up to 2 inches extra tire coverage to
prevent road debris from hitting side of truck• Dual composite layer construction:
Acrylic top layer for heat resistance/UV protection and interior ABS layer for structural rigidity, fatigue resistance and impact protection• Lightly textured and paint-able• Stainless steel rivets and rubber
gasket is included for tight fit• No drill application - all hardware included
for hassle free fitments Solid 1/4" plate center section that wraps the frame horns and lower cross member. 12,000lbs. winch plate.
Manufactured from1.75" .120 wall tubing
Dimple die steps
55
Acrylic top layer for heat resistance and UV protectionInterior ABS layer for structural rigidity, and fatigue resistance and impact protection