bullet casting bullet casting - Precision Reloadingthe right top punch and sizing die and the 4500 will smoothly size down your bullet to the correct diameter while it evenly applies

Lyman Mag 25 Digital Melting Furnace

Designed for the high volume bullet caster, the Mag 25 offers an array of features not found on any other furnace. With 850 watts of power, the furnace is quick to heat up, even with the increased capacity. The digital display on the front panel shows both the actual lead

temperature as well as the desired temperature setting. Precise furnace operation is enhanced by the simple key pad controls.• 25 pound capacity • Universal mould guide accepts most Lyman, RCBS, Redding/Saeco & Lee moulds • Built-in storage compartment • Powerful 850 watt heating system • Warming shelf for pre-heating mould blocks • Reliable bottom pour valve system for increased bullet productionLY2800382 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $307.99

Lyman’s “Master Casting Kit”With a 10 pound ca-pacity, the electric Big Dipper can melt enough alloy to turn out plenty of top quality bullets quick-ly. The kit’s low price also includes Lyman’s popular improved 4500 Bullet Sizer/Lu-bricator. Simply add

the right top punch and sizing die and the 4500 will smoothly size down your bullet to the correct diameter while it evenly applies the provided Super Moly lubricant. In addition to the Big Dipper and the 4500 Sizer/Lubricator, the kit features a long handled casting dipper, a handy ingot mould and the widely acclaimed “Bible of Bullet Casting”; Ly-man Cast Bullet Handbook. All this for less than the price of most casting furnaces.LY2712000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $242.99

Lyman’s “Big Dipper” Casting Starter KitIncludes “Big Dip-per” electric cast-ing furnace with 10+ lbs. capacity, Lyman Casting Dip-per, Ingot Mould for storing excess lead, Super Moly Bullet Lube, Orange Magic Bullet Lube, Alox Bullet Lube, the Lyman Cast Bullet Handbook and the Instruction Guide for Lyman Reloading & Bullet Casting Products.LY2800375 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$103.99

Lyman’s “Big Dipper” Electric Casting Fur-naceWith 10+ lbs. capacity and features like fast heat-up time

with heat control to +/- 10 degrees. Easy “on-off” temperature dial. Compact size with wide mouth for easy ladling.LY2800350 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $52.99

Lee Hardness Testing KitNo more wasted components shooting too soft or too hard lead. Cast and load with confi-dence knowing your alloy is up to the job. Quickly and precisely check hardness of your lead alloy. Exclusive conversion chart tells the maximum op-erating pressure of any lead alloy. Measures the im-pression created using the Lee Pocket Microscope. The diameter of the impression relates directly to the hardness of the lead alloy. Look up your im-pression diameter in the chart to determine the hardness and the maximum operating pressure of your alloy.LE90924 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $67.99

Redding SAECO Lead Hardness TesterA SAECO Lead Hardness Tester will pay for itself many times over by allowing you to convert inex-pensive scrap lead of unknown composition into casting alloy of known and reproduceable hard-ness. The SAECO Lead Hardness Tester measures alloy hardness by determining the depth of pen-etration of a hardened steel indenter into a bullet. Relative hardness of the bullet is read off a vernier scale. SAECO has created a chart that illustrates some commonly encountered alloys, their SAECO values, and where they would fall on the Brinell scale.RE42000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$164.99

bullet casting bullet casting

RCBS’s 10 lb. Cast Iron Lead PotIt features a flat bottom for sta-bility, bail handle, pouring spout, and a tab lifter for gripping with insulated tongs or pliers.RC80010 . . . . . . . . . . . . . . . . .$21.99

Lyman’s 10 lb. Cast Iron Lead PotNominal pot capacity is ten pounds of alloy. Flat bottom prevents tipping. New design in-cludes convenient pour spout.

LY2867795 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.99

Lyman 4500 Lube SizerFeatures solid one piece bottom cast-ing, heating elements, and a longer ball knob handle for more leverage for sizing and lubricating the largest bullets. Includes gas check seater and super moly lube.

LY2745880 . . . . . . . 4500 w/o Heater . . . . . .$203.99LY2745892 . . . . 4500 w/Heater (115 V) . . .$221.99LY2745896 . . . Heating Element (115 V) . . . $44.99

Lyman Gas Check SeaterThis ingenious, patented device allows consistent, square seating of gas checks. Works on all Lyman #450, 4500 Sizer/Lubri-cators and RCBS Lube-A-Matic.LY2745881 . . . . . . . . . . . . . . . . . . . $11.99

Lyman Universal LubeHeater AccessoryThis unit heats the Lube/Sizer to the right temperature for smooth, effortless bullet lubrication. The mounting plate is drilled and tapped for Lyman 450, RCBS, Saeco and Star Lube/Sizers. Plugs into standard 115 volt outlet (comes complete with mounting hardware). Note: Do not confuse with 4500 heating element.LY2745885 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $63.99

Lyman Casting ThermometerThis stainless steel thermometer will measure a temperature range from 200°F to 1000°F and has a six inch stem for use with even the deepest furnaces.LY2867793 . . . . . . . . . . . . . . . . . . . $46.99

RCBS Lube-A-Matic - 2 Bullet Sizer/LubricatorSize and lubricate cast bullets in one step with the Lube-A-Matic–2. Just insert a bullet in the sizer die and pull the handle. A sized and lubricated bullet ejects on the upstroke. A fingertip regulator lets you fine-tune lubricant flow. The Lube-A-Matic–2 also seats gas checks. A high quality tool that’s a “must have” item for the serious bullet caster. RC80040 . . . Lube-A-Matic–2 . . .$199.99RC86880 . . . . . .Dust Cover. . . . . . .$10.99

RCBS Lead ThermometerWith a 1000° F range and +/- 1% accuracy, their lead thermometer lets you pour lead at the optimum temperature. Large numbers are printed on a 1-1/2”, glass-

covered face. RC81175 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $59.99

Lyman’s Ingot MouldIngot Mould produces four easy to use, 1 pound ingots. Each mould forms four, easy-to-use ingots that stack easily and

will weigh approximately 1 lb. Sides of mould have 30° draft for easy ejection of lead ingots.LY2837794 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $25.99

RCBS Ingot MouldMould up to four ingots at

once and cool them quickly with this handy acces-sory. It’s perfect for melting down scrap lead and preparing alloys for future use.RC80005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.99

Lee Ingot MouldUse to cast 1/2 and one pound ingots. Perfect for remelting and alloying. Wood handle stays cool.

LE90029 . . . . . . . . $11.99

Lee Mould MalletFeatures Ash hardwood construction utilizing the

same wood species baseball bats are made from. Mallet is 10 inches long.LE90084 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $7.99

RCBS Mould MalletStop using a metal object to

tap out your cast lead bullets and potentially damaging your mould! RCBS has rein-troduced their wooden mould mallet to safely ac-complish this goal.RC80007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $10.99

Lyman Sizing DiesLyman improved sizing dies now have 90 degree hole spacing. It’s now easy to lubricate bul-lets even with today’s hard lubricants. Lyman sizing dies also feature a tapered mouth and hardened interior ensur-ing alignment for perfect cylindrical shape. Interior dimensions correspond to suggested diameters for all popular rifle and pistol calibers. Refer to the chart for proper size. Sizing Dies . . . . . . $29.99

Lyman Sizing Die Diameter ChartItem # Diameter Item # Diameter Item # DiameterLY2766462 . . . . . .224 LY2766486 . . . . . .323 LY2766550 . . . . . .409LY2766463 . . . . . .225 LY2766487 . . . . . .325 LY2766505 . . . . . .410LY2766542 . . . . . .243 LY2766488 . . . . . .338 LY2766506 . . . . . .413LY2766465 . . . . . .244 LY2766534 . . . . . .354 LY2766508 . . . . . .427LY2766460 . . . . . .251 LY2766490 . . . . . .355 LY2766537 . . . . . .428LY2766466 . . . . . .257 LY2766491 . . . . . .356 LY2766509 . . . . . .429LY2766467 . . . . . .258 LY2766492 . . . . . .357 LY2766510 . . . . . .430LY2766543 . . . . . .264 LY2766493 . . . . . .358 LY2766511 . . . . . .431LY2766470 . . . . . .266 LY2766494 . . . . . .359 LY2766541 . . . . . .439LY2766551 . . . . . .277 LY2766495 . . . . . .360 LY2766513 . . . . . .446LY2766471 . . . . . .278 LY2766559 . . . . . .363 LY2766514 . . . . . .450LY2766552 . . . . . .284 LY2766497 . . . . . .375 LY2766515 . . . . . .451LY2766473 . . . . . .285 LY2766527 . . . . . .377 LY2766516 . . . . . .452LY2766476 . . . . . .308 LY2766524 . . . . . .378 LY2766517 . . . . . .454LY2766477 . . . . . .309 LY2766498 . . . . . .379 LY2766519 . . . . . .457LY2766478 . . . . . .310 LY2766499 . . . . . .380 LY2766535 . . . . . .458LY2766479 . . . . . .311 LY2766500 . . . . . .381 LY2766530 . . . . . .459LY2766528 . . . . . .312 LY2766501 . . . . . .400 LY2766525 . . . . . .501LY2766480 . . . . . .313 LY2766502 . . . . . .401 LY2766520 . . . . . .509LY2766553 . . . . . .314 LY2766504 . . . . . .406 LY2766521 . . . . . .512LY2766485 . . . . . .321 LY2766548 . . . . . .408

RCBS Lube-A-Matic Lube and Sizer DiesJust insert a bullet in the sizer

die and pull the handle of the RCBS Lube-A-Mat-ic-2 bullet sizer lubricator. A sized and lubricated bullet ejects on the up stroke.Lube and Sizer Dies . . . . . . . . . . . . . . . . . . . . . . $29.99Item # Diameter Item # DiameterRC82200 . . . . . ..224” RC82225 . . . . . . .376”RC82240 . . . . . ..225” RC82252 . . . . . . .378”RC82201 . . . . . ..243” RC82243 . . . . . . .400”RC82202 . . . . . ..244” RC82245 . . . . . . .401”RC82203 . . . . . ..257” RC82249 . . . . . . .408”RC82204 . . . . . ..258” RC82226 . . . . . . .410”RC82207 . . . . . ..265” RC82246 . . . . . . .417”RC82205 . . . . . ..277” RC82227 . . . . . . .427”RC82206 . . . . . ..278” RC82244 . . . . . . .428”RC82208 . . . . . ..284” RC82228 . . . . . . .429”RC82209 . . . . . ..285” RC82229 . . . . . ..430”RC82211 . . . . . ..308” RC82230 . . . . . . .431”RC82212 . . . . . ..309” RC82253 . . . . . . .446”RC82214 . . . . . ..311” RC82231 . . . . . . .450”RC82242 . . . . . ..312” RC82232 . . . . . . .451”RC82215 . . . . . ..313” RC82233 . . . . . . .452”RC82216 . . . . . ..314” RC82234 . . . . . . .454”RC82217 . . . . . ..321” RC82235 . . . . . . .457”RC82219 . . . . . ..354” RC82236 . . . . . . .458”RC82220 . . . . . ..355” RC82237 . . . . . . .476”RC82221 . . . . . ..356” RC82254 . . . . . . .500”RC82222 . . . . . ..357” RC82250 . . . . . . .501”RC82223 . . . . . ..358” RC82255 . . . . . . .512”RC82224 . . . . . ..375”

Lee Lube & Sizing KitFastest and easiest way to lubricate and size cast bullets. Standard 7/8” - 14 threads fit any reloading press. Bullets are pushed through the sizing die nose first, so no special nose punches are needed. Gas checks are automatically seated and crimped in place. Sized bullets are cap-tured in the special container. Factory Crimp Die sold separately. Lube & Sizing Kit . . . . . . . . . . . . . . . . . . . . . . . . . $19.99

Item # Diameter Item # DiameterLE90049 . . . . . . .224” LE90047 . . . . . .357”LE90036 . . . . . . .225” LE90048 . . . . . .358”LE90083 . . . . . . .243” LE90060 . . . . . .401”LE90261 . . . . . . .278” LE90052 . . . . . .410”LE90170 . . . . . . .284” LE90053 . . . . . .427”LE90171 . . . . . . .285” LE90054 . . . . . .429”LE90037 . . . . . . .308” LE90062 . . . . . .430”LE90038 . . . . . . .309” LE90061 . . . . . .451”LE90039 . . . . . . .311” LE90055 . . . . . .452”LE90044 . . . . . . .314” LE90056 . . . . . .454”LE90686 . . . . . . .323” LE90057 . . . . . .457”LE90934 . . . . . . .329” LE90191 . . . . . .501”LE90576 . . . . . . .339” LE90188 . . . . . .510”LE90046 . . . . . . .356”

Lyman’s Orange Magic Premium Bullet LubeThis hard lubricant is designed to provide higher velocities with cast pistol and rifle bullets without leading. (Recommended for use with the Lyman Lube Heater). LY2857286 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99 Lyman’s Super Moly Bullet LubeThe Molybdenum Disulfide in this lube coats the barrel for increased velocity and improved accu-racy. In addition, it virtually eliminates leading and it flows through lube sizers without heat, yet won’t melt at 130°. LY2857272 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99 Lyman’s Black Powder Gold Bullet LubeMatch proven Black Powder Gold was formulated for long range black powder shooting. It keeps fouling soft and flows through lube sizers for ef-fortless bullet lubing. It can be applied by hand to muzzleloading bullets. LY2857266 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $6.99 Lyman’s Alox Bullet LubeThis is the original NRA formula developed for in-creased cast bullet velocities. LY2857277 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99 Lyman’s Ideal Bullet LubeA great all-purpose lube. LY2857275 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $5.99

A

B

C

D

E

A

B C

D E

All Lyman stick lubricants are hollow and fit the 4500 Sizer/ Lubricator and similar Sizing/Lubricat-ing tools, including RCBS.

RCBS Hollow Stick Bullet LubricantRCBS bullet lubricant fits the lube-a-matic sizer/lubricator and most others that use a hollow stick lubricant. RCBS rifle bullet lubri-cant is a blend of Alox and bees wax, formulated to NRA specifications. Works fine for pistol bullets. RC80008 . . .Hollow Stick Bullet Lubricant . . $5.99RC80009 . . . . . . .Rifle Bullet Lubricant . . . . . . $5.99

Lee Liquid AloxThe lube coats the entire bullet like a thin jacket and dries to a soft, varnish-like finish that really clings. The dried coating does not degrade gunpowder. While it works better than any other Lube with all cast or swagged bullets, it works best with micro band bullets, which are designed for tumble lubing.LE90177 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.99

SAECO Bullet LubricantSAECO Gold - Pistol Lubricant. Keeps bar-rels cleaner and reduces leading to a minimum for superior accuracy. SAECO Traditional - Rifle Lubricant. This is the NRA formula for Alox and bees wax. They use natu-ral yellow bees wax, not synthetics. Formulated to prevent leading improve accuracy at higher veloc-ity levels.SAECO Green - Rifle and Pistol Lubricant. An origi-nal SAECO formula brought back. Contains no alox. Slightly harder than the other SAECO lubes. Available in solid or hollow.RE37001 . . . . . . . . . . . . Gold Solid . . . . . . . . . . . $7.29RE37002 . . . . . . . . . Traditional Solid . . . . . . . . $7.29RE37003 . . . . . . . . . . . Green Solid . . . . . . . . . . . $7.29RE37004 . . . . . . . . . . . Gold Hollow . . . . . . . . . . $7.29RE37005 . . . . . . . . Traditional Hollow . . . . . . . $7.29RE37006 . . . . . . . . . . Green Hollow . . . . . . . . . . $7.29

Gold Traditional Green

Frankford Arsenal CleanCast Lead Fluxing CompoundCleanCast is non-smoking, odor-free, and it really works. Only a small amount is necessary to prepare even a 20 pound lead pot for bullet production. FFA441888 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $9.99

Lyman’s Digital Lead ThermometerThe Lyman Digital Thermom-eter is a fast and accurate way to check the temperature of your casting alloy. The long 6” probe will work with the largest casting furnaces and keeps your hand away from molten lead. The large, easy to read display can be set for Fahrenheit or Celsius and also fea-tures a hold button to lock a reading on the display.LY2867797 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $24.99

68 Order Online 24/7 at precisionreloading.com | 800-223-0900 Your Hunting & Shooting Outfitters 69

bullet castingbullet casting

Lee Shotgun Slug MouldsLee Slug Mold features the exclusive drive key which positively rotates the slug in rifled shotgun barrels. Includes sprue plate, handles and instruc-tion with suggested loads. Mould is complete with sprue plate, handles and complete instructions with suggested loads.LE90282 . . . .12 Ga. 7/8 Oz. Slug Mould . . . . $25.99LE90281 . . . . .12 Ga. 1 Oz. Slug Mould . . . . $25.99

Lee 18 Cavity Buckshot MouldsPrecision-machined mould produces 18 linked pellets per cast. No

need to individually count pellets - simply snip three strands into

your 12 gauge shell. Handles shown are not included.

LE90192 . . . . .#000 Buckshot (.360 Dia.) . . . .$49.99LE90486 . . . . . #00 Buckshot (.330 Dia.) . . . . .$49.99LE90028 . . . . . . #4 Buckshot (.240 Dia.) . . . . .$49.99LE90005 . . . . . . . . . .Mould Handles . . . . . . . . .$14.99

Lee Combination Muzzeloader Bullet Moulds

45 CaliberThis double cavity mould will cast one 45 Cal. 200 Gr. R.E.A.L. (Rifle engraved at loading) bullet and one .440 diameter Round Ball.LE90405 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.9950 Caliber This double cavity mould will cast one 50 Cal. 320 Gr. R.E.A.L. (Rifle engraved at loading) bullet and one .490 diameter Round Ball.LE90488 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.99

Lee Conical Bullet Mould for Black Powder RevolversA super accurate bullet that is easy to load straight and true. Two lube grooves prevent flash ignition and

lead fouling. More energy and far greater accuracy than round balls.Price . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $21.99LE90378 . . . . . . . .36 Cal. (.375) 130 Gr.LE90382 . . . . . . . .44 Cal. Rem. (.450) 200 Gr.LE90384 . . . . . . . .44 Ruger Old Army (.456) 220 Gr.

Lee Minie Bullet MouldAutomatic Core Pin Mould. Open the mould up-side down to empty. Close it and you’re ready to cast the next. The core pin automatically centers in the mould. Easily cast 200 per hour. A quality mould built to last as long as your rifle. Complete with Handles and Automatic Core Pin.

Lee Original Minie Ball MouldAn extremely popular, traditional size Minie bullet. Certainly a must for authen-tic muzzleloading shooting. (Single Cavity)LE90481 . . . . 58 Cal (.575) . . . . .500 Gr. . . . . $24.99

Frankford Arsenal Drop OutApplied to the cavities of a cold, clean bul-let mould, Frankford Arsenal Drop Out lit-erally allows the just-cast bullets to “drop-out” with no tapping or pounding. FFA763758 . . . . . 6 oz Aerosol . . . . $11.99

Lyman’s Gas ChecksThese gilding metal cups fit the cast bullet base and protect it from hot powder gases. Easily seated during bullet sizing, the gas checks also permit higher velocities. (1000 per pack).LY2827261 . . . . . . . . . . . .22 Cal . . . . . . . . . . . . . $45.99LY2827263 . . . . . . . . . . . .25 Cal . . . . . . . . . . . . . $45.99LY2827264 . . . . . . .264 Cal (6.5mm) . . . . . . . . $48.99LY2827266 . . . . . . . .284 Cal (7mm) . . . . . . . . . $49.99LY2827267 . . . . . . . . . . . .30 Cal . . . . . . . . . . . . . $49.99LY2827268 . . . . . . . . .32 Cal (8mm) . . . . . . . . . $49.99LY2827270 . . . . .35 Cal (.38Spl. & .357) . . . . . $49.99LY2827271 . . . . . . . . . . . .375 Cal . . . . . . . . . . . . $58.99LY2827272 . . . . . . . . . . . .44 Cal . . . . . . . . . . . . . $64.99LY2827273 . . . . . . . . . . . .45 Cal . . . . . . . . . . . . . $64.99

Hornady Crimp-On Gas ChecksDuring sizing, the gas check crimps to the base of cast lead bullets to seal gasses and protect the base from deformation. (1000 Per pack).HN7010 . . . . . . . . . . . . . . 22 Cal . . . . . . . . . . . . . .$29.99HN7020 . . . . . . . . . . . . . . .6mm . . . . . . . . . . . . . . .$34.49HN7030 . . . . . . . . . . . . . . 25 Cal . . . . . . . . . . . . . .$32.49HN7040 . . . . . . . . . . . . . . 6.5mm . . . . . . . . . . . . . .$34.49HN7050 . . . . . . . . . . . . . .270 Cal . . . . . . . . . . . . . .$34.99HN7060 . . . . . . . . . . . . . . .7mm . . . . . . . . . . . . . . .$39.99HN7070 . . . . . . . . . . . . . . 30 Cal . . . . . . . . . . . . . .$35.99HN7080 . . . . . . . . . . . . . . .8mm . . . . . . . . . . . . . . .$39.49HN7090 . . . . . . . . . . . . . .338 Cal . . . . . . . . . . . . . .$36.99HN7100 . . . . . . . . . . . . . .348 Cal . . . . . . . . . . . . . .$39.99HN7110 . . . . . . . . . . . . . . 35 Cal . . . . . . . . . . . . . .$31.99HN7120 . . . . . . . . . . . . . .375 Cal . . . . . . . . . . . . . .$39.99HN7125 . . . . . . . . . . . . . .416 Cal . . . . . . . . . . . . . .$44.99HN7130 . . . . . . . . . . . . . . 44 Cal . . . . . . . . . . . . . .$42.99HN7140 . . . . . . . . . . . . . . 45 Cal . . . . . . . . . . . . . .$45.99HN7145 . . . . . . . . . . . . . .475 Cal . . . . . . . . . . . . . .$47.99

RCBS Utility BoxThe RCBS Utility Box is a durable plastic container for storage and transportation of reloading ac-

cessory items including bullet moulds, RAM Prim-ing Units, Three Way Cutters, Deluxe Scale Check Weights, Case Neck Turners, and more. Size: (L) 3.5” x (W) 2.5” x (H) 2”.RC09888 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$5.09

MTM Cast Bullet Box Made from See-Thru polypro-pylene for easy identification.

Comes with caliber labels for marking the box. Holds 160 250 gr. 45 ACP Bullets.Size: (L) 3.4” x (W) 3.4” x (H) 2.5”.• Strong Snap-Latch• Sold in bundled stacks of 2 boxes• Holds 160, 45 ACP or 200, 9mm LugerMTCAST116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $3.99

Lee Modern Minie Target DesignThe most accurate of all Minies. Makes nice, clean holes in the target. The first choice for highest scores.

Lee Modern Minie Target Design(Single Cavity)LE90471 . . . . 50 Cal (.500) . . . . 354 Gr. . . . . $24.99

Lee Improved MinieTraditional DesignImproved design is easier to cast and load. Usually more accurate; a wider variety of sizes. Handles included.

Lee Improved Minie Traditional DesignLE90467 . . . . 45 Cal (.450) . . . . . .294 Gr. . . . $24.99LE90469 . . . . 45 Cal * (.454) . . . . .298 Gr. . . . $24.99LE90472 . . . . 50 Cal (.500) . . . . . .360 Gr. . . . $24.99LE90473 . . . . 54 Cal (.533) . . . . . .410 Gr. . . . $24.99LE90474 . . . . 54 Cal * (.540) . . . . .415 Gr. . . . $24.99LE90476 . . . . 58 Cal (.575) . . . . . .472 Gr. . . . $24.99LE90478 . . . . 58 Cal * (.578) . . . . .478 Gr. . . . $24.99* Oversize

Pistol Moulds

Old New Parker Blue-Grey New 69 .50 .54 .54 .58 Style Style Hale .58 Target Musket .45 .50Mfg. Mould # 508656 548657 542622 575494 575213-OS 575213 575213PH 577611 578675 68569 454646 504617 Bullet Dia. .508” .548” .542” .575” .575” .575” .575” .575” .578” .685” .454” .504” Bullet Weight 395 Gr. 450 Gr. 425 Gr. 315 Gr. 460 Gr. 510 Gr. 566 Gr. 530 Gr. 405 Gr. 730 Gr. 245 Gr. 370 Gr.Style Plains Plains Minie Ball Minie Ball Minie Ball Minie Ball Minie Ball Minie Ball Minie Ball Minie Ball Maxi Ball Maxi Ball1- Cavity # LY2654656 LY2654657 LY2654622 LY2654494 LY2654213 LY2651213 LY2650213 LY2654611 LY2654675 LY2654569 LY2640616 LY2640617

Lyman Black Powder Bullet Moulds

.45 Conical & Plains BulletsThese offer the traditional muzzleloader a tapered bullet design for easy loading. Large deep lube grooves hold enough lube to keep fouling soft and ensure accuracy without leading.

Mini and Maxi MouldThese designs are exactly reproduced from originals used over 100 years ago. The best bullets selected from American and British design from 45 to 69 caliber.

Pricing1 Cavity Mould . . . . . . . . . . . . . . . . . . $81.99 Mould Handles not Included.LY2735793 . . .2-Cavity Handles . . . . $41.99(For all current 2-cavity and 1-cavity moulds)

Volunteer Whitworth .451 .45 Mfg. Mould # 451114 457121PHBullet Dia. .451” .457”Bullet Weight 450 Gr. 475 Gr.Style .45 Conical .45 Conical1-Cavity # LY2641114 LY2641121

Lyman Shotgun Sabot Slug MouldsLyman Sabot slugs are de-signed to fit standard shot-gun wads and star crimped.

No special roll crimping tools necessary. They re-quire double cavity handles. Loading data available in the new Lyman Shotshells Handbook 5th Edition.LY2654112 . . . . . . . . .12 Ga. 525 Gr. . . . . . . . . .$81.99LY2654120 . . . . . . . . .20 Ga. 350 Gr. . . . . . . . . .$81.99LY2735793 .Double Cavity Mould Handles .$41.99

Lyman (Foster Type) Shotgun Slug Mould

Available in 12 or 20 gauge, these moulds cast per-fect hollowbase slugs which do not require rifling. Slug moulds are single cavity only and cut into the larger double cavity block. They require double cavity handles. Loading data available in the new Lyman Shotshells Handbook 5th Edition.LY2654012 . . . . . . . . .12 Ga. 475 Gr. . . . . . . . . .$81.99LY2654020 . . . . . . . . .20 Ga. 345 Gr. . . . . . . . . .$81.99LY2735793 .Double Cavity Mould Handles .$41.99

Lee R.E.A.L. (Rifle Engraved at Loading) Muzzleloader Bullet MouldsA solid bullet that loads easily even after many fir-ings because of its unique cleaning action. Will not tumble. A perfect hunting bullet with heavy loads. Easy to cast. Shoots accurately even in greatly oversize barrels.

20 Ga. 12 Ga.

Item# Caliber Grain PriceLE90390 . . . . . . 45 Cal . . . . . . . 200 Gr. . . . . . $21.99LE90392 . . . . . . 45 Cal . . . . . . . 250 Gr. . . . . . $21.99LE90394 . . . . . . 50 Cal . . . . . . . 250 Gr. . . . . . $21.99LE90396 . . . . . . 50 Cal . . . . . . . 320 Gr. . . . . . $21.99LE90398 . . . . . . 54 Cal . . . . . . . 300 Gr. . . . . . $21.99LE90400 . . . . . . 54 Cal . . . . . . . 380 Gr. . . . . . $21.99LE90404 . . . . . . 58 Cal . . . . . . . 440 Gr. . . . . . $21.99

Lee Round Ball MouldsHave tangential cut off which eliminates the ob-jectional nib at the spruce. Includes handles.

Lyman Round Ball MouldsThrow perfect, ball after ball, with a minimum sprue to ensure the kind of accuracy that target shooters have come to expect from Lyman preci-sion moulds. Handles not included.• All Single cavity round ball moulds take double cavity handles.

LE90406 . . . .311 (Double Cavity Mould) . . . $21.99LE90410 . . . .319 (Double Cavity Mould) . . . $21.99LE90415 . . . .350 (Double Cavity Mould) . . . $21.99LE90418 . . . .360 (Double Cavity Mould) . . . $21.99LE90420 . . . .375 (Double Cavity Mould) . . . $21.99LE90423 . . . .380 (Double Cavity Mould) . . . $21.99LE90424 . . . .390 (Double Cavity Mould) . . . $21.99LE90425 . . . .395 (Double Cavity Mould) . . . $21.99LE90432 . . . .433 (Double Cavity Mould) . . . $21.99LE90436 . . . .440 (Double Cavity Mould) . . . $21.99LE90438 . . . .445 (Double Cavity Mould) . . . $21.99LE90440 . . . .451 (Double Cavity Mould) . . . $21.99LE90442 . . . .454 (Double Cavity Mould) . . . $21.99LE90444 . . . .457 (Double Cavity Mould) . . . $21.99LE90448 . . . .490 (Double Cavity Mould) . . . $21.99LE90691* . . .490 (Twelve Cavity Mould) . . . $48.99LE90450 . . . .495 (Double Cavity Mould) . . . $21.99LE90452 . . . .500 (Double Cavity Mould) . . . $21.99LE90283 . . . .530 (Double Cavity Mould) . . . $21.99LE90456 . . . .535 (Double Cavity Mould) . . . $21.99LE90460 . . . .562 (Double Cavity Mould) . . . $21.99LE90461 . . . .575 (Double Cavity Mould) . . . $21.99LE90975 . . . .600 (Single Cavity Mould) . . . . $21.99LE90978 . . . .690 (Single Cavity Mould) . . . . $21.99*Handles Not Included

Lyman Round Ball Suitability Chart Single Cavity 2 Cavity Ball Part # Part # Caliber/Diameter $81.99 $81.99 Gauge .375 (P) * . . . . . . . . . . . . . . . . LY2665375 . . .36 Caliber.440 * . . . . . . . . . . . . . . . . . . . LY2665440 . . .45 Caliber.445 . . . . . . . . . . . . . . . . . . . . LY2665445 . . .45 Caliber.451 (P) . . . . . . . . . . . . . . . . . LY2665451 . . .44 Caliber.454 (P) . . . . . . . . . . . . . . . . . LY2665454 . . .44 Caliber.457 (P) . . . . . . . . . . . . . . . . . LY2665457 . . . .45 Ruger.490 * . . . . . . . . . . . . . . . . . . . LY2665490 . . .50 Caliber.495 . . . . . . . . . . . . . . . . . . . . LY2665495 . . .50 Caliber.530 * . . . . LY2645530 . . . . . . . . . . . . . . . . . .54 Caliber.535 . . . . . LY2645535 . . . . . . . . . . . . . . . . . .54 Caliber.570 * . . . . LY2645570 . . . . . . . . . . . . . . . . . .58 Caliber.600 . . . . . LY2645600 . . . . . . . . . . . . . . . . . . . . . . . . . . . ..610 . . . . . LY2645610 . . . . . . . . . . . . . . . . . . . . . . . . . . . ..662 . . . . . LY2645662 . . . . . . . . . . . . . . . . . ..12 Gauge.690 . . . . . LY2645690 . . . . . . . . . . . . . . . . . . 12 Gauge.715 * . . . . LY2645715 . . . . . . . . . . . . . . . . . .75 Caliber.735 . . . . . LY2645735 . . . . . . . . . . . . . . . . . . . . . . . . . . . .* Recommended size depending on bore diam-eter. (P) Recommended for percussion revolvers.

RCBS Round Bullet MouldsItem # Dia. Mould PriceRC82134 . . . . . ..435” . . . . . . . .435-112 . . . . . . .$75.99RC82135 . . . . . ..440” . . . . . . . .440-116 . . . . . . .$75.99RC82138 . . . . . ..451” . . . . . . . .451-125 . . . . . . .$75.99RC82140 . . . . . ..457” . . . . . . . .457-130 . . . . . . .$84.99RC82142 . . . . . ..490” . . . . . . . .490-160 . . . . . . .$75.99Handles not included. (See page 77 for mould handles).

RCBS Minie Ball Mould (Single Cavity)RC82103 . . . . . 58 Cal (.575) . . .500 Gr. . . . . .$99.99

RCBS Neck Expander Dies for Cast Rifle BulletsTo eliminate deforming the base and shaving lead off the sides of your lead rifle bullets during seat-ing. RCBS strongly recommends using their Neck Expander Die. In one step, the neck expander die expands the neck and slightly flares the case mouth of your bottle neck cases.RC39800 . . . . . . .Neck Expander Body . . . . . $21.99RC39801 . . . . .Neck Expander Plug Rod. . . . . $5.99Neck Expander Plug (see chart below)

Neck Expander Dies Bullet Complete Die Exp. Plug OnlyDiameter $28.99 $10.99 .224” . . . . . . . . . . . . . . RC39803 . . . . . . . . . . . RC39851.228” . . . . . . . . . . . . . . RC39805 . . . . . . . . . . . RC39853.243” . . . . . . . . . . . . . . RC39807 . . . . . . . . . . . RC39855.257” . . . . . . . . . . . . . . RC39809 . . . . . . . . . . . RC39857.264” . . . . . . . . . . . . . . RC39811 . . . . . . . . . . . RC39859.277” . . . . . . . . . . . . . . RC39813 . . . . . . . . . . . RC39861.284” . . . . . . . . . . . . . . RC39815 . . . . . . . . . . . RC39863.308” . . . . . . . . . . . . . . RC39817 . . . . . . . . . . . RC39865.309” . . . . . . . . . . . . . . RC39819 . . . . . . . . . . . RC39867.310” . . . . . . . . . . . . . . RC39821 . . . . . . . . . . . RC39869.311” . . . . . . . . . . . . . . RC39823 . . . . . . . . . . . RC39871.321” . . . . . . . . . . . . . . RC39825 . . . . . . . . . . . RC39873.323” . . . . . . . . . . . . . . RC39827 . . . . . . . . . . . RC39875.338” . . . . . . . . . . . . . . RC39829 . . . . . . . . . . . RC39877.348” . . . . . . . . . . . . . . RC39830 . . . . . . . . . . . RC39878.358” . . . . . . . . . . . . . . RC39831 . . . . . . . . . . . RC39879.375” . . . . . . . . . . . . . . RC39833 . . . . . . . . . . . RC39881.416” . . . . . . . . . . . . . . RC39835 . . . . . . . . . . . RC39883

RCBS Bullet Casting Bullet casting is an age-old art ex-plained with modern technology. This comprehensive DVD is au-thoritative, informative, and enter-

taining to watch. Step-by-step instructions on cast bullet preparation and moulding. (DVD)RC99908 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $15.79

Lyman Cast Bullet HandbookThis handbook is the first with data for selected moulds from other manufacturers where those bullet designs or weights would be of interest to cast bul-let experimenters. New calibers like the Ruger Compact Mag-nums, .327 Federal have also been added as have a number of black powder loads for the popu-lar older cartridges. LY9817004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $23.99

Berry’s Plastic Utility Boxes#403U - 4-3/8” x 2” x 1-5/8”BERY25010 . . . . . . . . . . . . .Blue . . . . . . . . . . . . . . $2.99#003U - 4-1/2” x 4-1/2” x 1-5/8”BERY22301 . . . . . . . . . . . . .Blue . . . . . . . . . . . . . . $2.99#409U - 5.4” x 2-5/8” x 2-1/2”BERY29020 . . . . . . . . . . . . Black . . . . . . . . . . . . . $2.99

Lyman Reloading and Cast Bullet User GuideThis booklet is filled with complete in-formation on getting started in Reload-ing and Bullet Casting. It also includes detailed product instructions and parts drawings for Lyman presses, trimmers, scales, powder mea-sure and tumblers. 80 pages. Soft cover.LY9837283 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $2.99


Lyman Pistol MouldsLyman’s standard offering of pistol moulds covers pop-ular bullet designs in double cavity style. Four cavity blocks for selected designs are also available. Lyman Rifle Moulds

Lyman rifle moulds are the standard by which all other rifle moulds are judged. The designs shown below picture gas checks where appropriate. All Lyman rifle moulds are available in double cavity only. Except those moulds where the size of the bullet necessitates a single cavity. Hollow point designs are noted above bullet.

NOTE: All standard rifle and pistol moulds use handles #2735793, and four-cavity moulds use handle #2735794. Bullet weights listed are nominal and may well vary from bullets dropped from a given mould. Variations between listed nominal weights and actual as-cast weights have absolutely no effect on accuracy. These bullet illustrations are artists’ renderings. They are for general reference only are not intended to be precise representation.

• Cowboy Action Moulds • Recommended for use on silhouettes * Use 30 Cal. gas check

• Cowboy Action Moulds • Recommended for use on silhouettes * Use 30 Cal. gas check

Lyman Mould HandlesSolid metal frame is easily attached to blocks with slotted screws. Hardwood handles provide a cool secure grip. Designed to provide uniform grip with different mould blocks.LY2735793 . . . . . . . . . . . . . . . . . . Double-Cavity Handles. . . . . . . . . . . . . . . . . $41.99LY2735794 . . . . . . . . . . . . . . . . . . . .Four-Cavity Handles . . . . . . . . . . . . . . . . . . $41.99

Pricing 1 Cavity Mould . . . . . . . . . . . . . . . . . . $81.99 2 Cavity Mould . . . . . . . . . . . . . . . . . . $81.99 4 Cavity Mould . . . . . . . . . . . . . . . . .$112.99 Lyman Top Punch. . . . . . . . . . . . . . . . $12.99 Mould Handles not Included.

Pricing 1 Cavity Mould . . . . . . . . . . . . . . . . . . $81.99 2 Cavity Mould . . . . . . . . . . . . . . . . . . $81.99 Lyman Top Punch. . . . . . . . . . . . . . . . $12.99Mould Handles not Included.

Rifle Moulds .22 .25 6.5mm 7mm .30 M1/

7.62x39mm Mfg. Mould # 225438 225415 225646 257420 266469 266673 287346 287641 311359 311410 Bullet Dia. .225” .225” .225” .258” .264” .264” .285” .285” .309”-.312” .309”-.312” Bullet Weight 44 Gr. 55 Gr. 55 Gr. 65 Gr. 140 Gr. 150 Gr. 135 Gr. 160 Gr. 115 Gr. 130 Gr.

StyleRound Nose, Gas Check

Flat Nose,Gas Check

Semi-Point,Gas Check

Flat Nose,Gas Check

Round Nose,Gas Check

Semi-PointGas Check Sil.


SilhouettePointed Tip,Gas Check

Pointed Tip

2-Cavity Mould LY2660438 LY2660415 LY2660646 LY2660420 LY2660469 LY2660673 LY2660346 ---- LY2660359 LY2660410 Top Punch # LY2786733 LY2786726 LY2786759 LY2786728 LY2786741 LY2786753 LY2786715 LY2786753 LY2786772 LY2786743

• •

Rifle Moulds .375/

.38-55 .378

.38-55 .40 Cal

.406 dia. .40 Cal

.410 dia. 405 43 Span.

43 Mauser

Mfg. Mould # 375248 375449 378674 403168 403169 410660 410678 410655 410663 412263 439186 446110 Bullet Dia. .377”-379” .377”-.379” .377”-.379” .406” .406”-.408” .406”-.410” .406”-.410” .406”-.410” .406”-.410” .412” .439” .446” Bullet Weight 249 Gr. 264 Gr. 335 Gr. 200 Gr. 240 Gr. 385 Gr. 395 Gr. 400 Gr. 400 Gr. 288 Gr. 370 Gr. 340 Gr.

Style Flat NoseFlat Nose,Gas Check

Round Nose Flat Nose Flat Nose Semi-PointedPointed

TipFlat Nose Round Nose Round Nose Round Nose Flat Nose

2-Cavity Mould LY2660248 LY2660449 ---- LY2660168 LY2660169 ---- ---- ---- ---- ---- ---- ----

1-Cavity Mould ---- ---- LY2640674 ---- ---- LY2640660 LY2640678 LY2640655 LY2640663 LY2640263 LY2640186 LY2640110

Top Punch # LY2786736 LY2786736 LY2786779 LY2786691 LY2786691 LY2786755 LY2786785 LY2786736 LY2786779 LY2786695 LY2786704 LY2786704

Rifle Moulds 45 H.P. Postell .50

Mfg. Mould # 457191 457122 457124 457643 457193 457671 457658 457677 457125 457132 515139 515141 515142 Bullet Dia. .458”-.459” .458”-.459” .458”-.459” .458”-.459” .458”-.459” .458”-.459” .458”-.459” .458”-.459” .458”-.459” .458”-.459” .515” .512” .512” Bullet Weight 292 Grain 330 Grain 385 Grain 400 Grain 405 Grain 475 Grain 480 Grain 490 Grain 500 Grain 535 Grain 340 Grain 425 Grain 515 Grain

StyleFlat Nose,Bevel Base

Flat Nose,Hollow Point

Round Nose Flat Nose Flat NoseRound Nose,

Gas CheckSemi-

PointedPointed Tip Round Nose

Semi-Pointed

Flat Nose Flat Nose Flat Nose

1-Cavity Mould LY2640191 LY2650122 LY2640124 LY2640643 LY2640193 LY2640671 LY2640658 LY2640677 LY2640125 LY2640132 LY2640139 LY2640141 LY2640142

Top Punch # LY2786701 LY2786701 LY2786719 LY2786701 LY2786701 LY2786719 LY2786755 LY2786781 LY2786719 LY2786695 LY2786701 LY2786696 LY2786778

Pistol Moulds .38/.357 40 S&W/10mm .38/40 .44/40

Mfg. Mould # 358311 358429 358430 401654 401638 401043 427666 427098 Bullet Dia. .358” .358” .358” .401” .401” .401” .428” .428” Bullet Weight 160 Grain 170 Grain 195 Grain 150 Grain 175 Grain 175 Grain 200 Grain 205 Grain

Style Round Nose Semi-Wadcutter Round Nose

Semi-Wadcutter,Bevel Base

Truncated Bevel Base Flat Nose Flat Nose,Bevel Base Flat Nose

2-Cavity Mould LY2660311 LY2660429 LY2660430 LY2660654 LY2660638 LY2660043 LY2660666 LY2660098 4-Cavity Mould LY2670311 LY2670429 ---- ---- LY2670638 ---- LY2670666 ---- Top Punch # LY2786710 LY2786731 LY2786732 LY2786691 LY2786691 LY2786691 LY2786778 LY2786691

••

Pistol Moulds .44 .45 Auto

Mfg. Mould # 429215 429667 429421 429383 429244 429650 452460 452630 452374 Bullet Dia. .430” .430” .430” .430” .430” .430” .452” .452” .452” Bullet Weight 210 Gr. 240 Gr. 245 Gr. 245 Gr. 255 Gr. 300 Gr. 200 Gr. 200 Gr. 225 Gr.

StyleSemi-Wadcutter,

Gas CheckFlat Nose,Bevel Base

Semi-Wadcutter Round Nose

Semi-Wadcutter,Gas Check


Semi-Wadcutter

Flat Nose, Bevel Base Round Nose

2-Cavity Mould LY2660215 LY2660667 LY2660421 LY2660383 LY2660244 LY2660650 LY2660460 LY2660630 LY2660374 4-Cavity Mould LY2670215 ---- LY2670421 ---- LY2670244 ---- LY2670460 LY2670630 LY2670374 Top Punch # LY2786729 LY2786778 LY2786729 LY2786704 LY2786729 LY2786729 LY2786740 LY2786740 LY2786719

•• •

Pistol Moulds

.45 Colt .45 500 S&W

Mfg. Mould # 454190 452664 452424 452490 452651 501680 Bullet Dia. .454” .452” .452” .452” .452” .501” Bullet Weight 250 Gr. 250 Gr. 255 Gr. 255 Gr. 325 Gr. 375 Gr.

Style Flat Nose Flat Nose Semi-Wadcutter


Flat Nose,Gas Check

Semi-Wadcutter

1-Cavity Mould ---- ---- ---- ---- ---- LY2640680 2-Cavity Mould LY2660190 LY2660664 LY2660422 LY2660490 LY2660651 ---- 4-Cavity Mould ---- LY2670664 ---- ---- ---- ---- Top Punch # LY2786700 LY2786778 LY2786730 LY2786730 LY2786778 LY2786778

•

Devastator Hollow Point Moulds

38 spec./ 9mm .44 .45

Mfg. Mould # 356637 429640 452374

Bullet Dia. .356” .430” .452”

Bullet Weight 125 Gr. 250 Gr. 180 Gr.

Style Flat Nose,Bevel Base

Hollow Point,Gas Check Hollow Point

1-Cavity Mould LY2650637 LY2650640 LY2650374

Top Punch # LY2786749 LY2786778 LY2786719

Rifle Moulds .30 32/20 .314 dia. 32/40 8mm 35

Mfg. Mould # 311672 311291 311041 311332 311644 311679 311299 311284 311008 314299 319247 323470 358315 Bullet Dia. .309” .309” .309” .309” .309” .309” .309” .309” .312” .314” .314” .325” .358” Bullet Weight 160 Gr. 170 Gr. 173 Gr. 180 Gr. 190 Gr. 195 Gr. 200 Gr. 210 Gr. 115 Gr. 200 Gr. 165 Gr. 165 Gr. 204 Gr.

StyleFlat Nose

Gas Check Sil.Round Nose,

Gas CheckFlat Nose, Gas Check

Pointed Tip,Gas Check

Semi-PointGas Check Sil.

Gas CheckRound Nose,

Gas CheckRound Nose,

Gas CheckFlat Nose


Flat NoseRound Nose,

Gas CheckRound Nose, Gas Check Sil.

2-Cavity Mould LY2660672 LY2660291 LY2660041 LY2660332 LY2660644 LY2660679 LY2661299 LY2660284 LY2660008 LY2660299 LY2660247 LY2660470 LY2660315

Top Punch # LY2786758 LY2786742 LY2786690 LY2786725 LY2786758 LY2786772 LY2786743 LY2786707 LY2786690 LY2786743 LY2786690 LY2786745 LY2786710

• • •*•


Pistol Moulds .30 .32 9mm .38/.357

Mfg. Mould # 311252 313249 356242 356402 356242 356637 358091 358477 358156 358665 Bullet Dia. .311” .313” .356” .356” .356” .356” .358” .358” .358” .358” Bullet Weight 75 Gr. 85 Gr. 90 Gr. 120 Gr. 120 Gr. 147 Gr. 150 Gr. 150 Gr. 155 Gr. 158 Gr.

Style Round Nose Round Nose Round Nose TruncatedCone Round Nose Flat Nose,

Bevel BaseWadcutter,Bevel Base

Semi-Wadcutter


Flat Nose

2-Cavity Mould LY2660252 LY2660249 LY2661242 LY2660402 LY2660242 LY2660637 LY2660091 LY2660477 LY2660156 LY2660665 4-Cavity Mould ---- ---- ---- LY2670402 ---- LY2670637 LY2670091 LY2670477 LY2670156 LY2670665 Top Punch # LY2786742 LY2786703 LY2786710 LY2786723 LY2786710 LY2786749 LY2786769 LY2786731 LY2786731 LY2786769

••


Lee MouldsAll Lee Mould Blocks are made from aluminum, because of the exceptional moulding qualities. The mould cavities are CNC machined for unmatched roundness and size control. Most bullets from Lee moulds can be used as cast without sizing. Lee Hollow Base Moulds - Lee Hollow Base Moulds are available in single cavity only. They all have self center-ing automatic core pins for the fastest possible moulding. Handles and sprue plate included in hollow base moulds.

Lee Six Cavity Commercial Quality MouldsThese are made for heavy duty volume production. The mould and blocks have steel bushing and alignment pins for lasting precision. Price includes a cam operated sprue plate to eliminate the pounding common to ordinary moulds. The sprue plate is hard anodized and held down with wave washers at each end. No finer mould can be pur-chased at any price. Handles not included.

Pistol Moulds45 ACP, 45 Auto Rim, 45 Colt

Mfg. Mould # 452-200-SWC 452-200-RF TL452-200-SWC 452-228-1R TL452-230-2R TL452-230-TC 452-230-TC 452-252-SWC 452-255-RF

Ballistic Coefficient .127 .140 .127 .145 .189 .146 .146 .136 .210 Bullet Diameter .452” .452” .452” .452” .452” .452” .452” .452” .452” Bullet Weight 200 Gr. 200 Gr. 200 Gr. 228 Gr. 230 Gr. 230 Gr. 230 Gr. 252 Gr. 255 Gr.

Style Semi-Wadcutter Flat Nose Semi-WadcutterTumble Lube

Round Nose, 1 Ogive Radius

Round Nose, Tumble Lube,

2 Ogive RadiusTruncated Cone,

Tumble LubeTruncated

Cone Semi-Wadcutter Flat Nose

2-Cavity Mould LE90348 LE90234 LE90463 LE90351 LE90346 LE90287 LE90290 LE90356 LE90358 6-Cavity Mould LE90310 LE90697 LE90379 LE90352 LE90350 LE90286 LE90289 ---- LE90349

Lee Mould HandlePrecision steel mould handles fit not only the Lee Six Cavity blocks, but most other brands of one and two cavity moulds. Priced low enough so you can have a set for every pair of blocks. LE90005 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $14.99

Pricing 2 Cavity Mould . . . (w/ handles) . . . $21.99 6 Cavity Mould . . . (w/o handles) . . $42.99

Pricing 1 Cavity Mould . . . . (w/ handles) . . . $24.99 2 Cavity Mould . . . . (w/ handles) . . . $21.99 6 Cavity Mould . . . (w/o handles) . . . $42.99

Pistol Moulds 32/20, 32 S&W Long, 32 Colt NP 38 Special, 38 S&W, 38 Colt New Police, 357 Mag

Mfg. Mould # 311-93-1R 311-100-2R TL314-90-SWC 358-105-SWC 358-125-RF 358-140-SWC TL358-148-WC 358-148-WC 358-150-1R


Style Round Nose, 1 Ogive Radius

Round Nose,2 Ogive Radius

Semi-Wadcutter,Tumble Lube Semi-Wadcutter Round Nose,

Flat Nose Semi-Wadcutter Wadcutter,Tumble Lube Wadcutter Round Nose,

1 Ogive Radius

2-Cavity Mould LE90300 LE90301 LE90311 LE90316 LE90574 LE90318 LE90279 LE90312 LE90328 6-Cavity Mould LE90308 ---- ---- LE90315 LE90306 LE90317 LE90294 LE90380 LE90326

Pistol Moulds38 Special, 38 S&W, 38 Colt New Police, 357 Mag 9mm Luger, 38 Super Auto, 380 Auto

Mfg. Mould # TL358-158-SWC C358-158-SWC TL358-158-2R 358-158-RF 356-102-1R 356-120-TC TL356-124-2R TL356-124-TC 356-125-2R


Style Semi-Wadcutter,Tumble Lube


Round Nose, 2 Ogive Radius, Tumble Lube

Round Nose,Flat Nose


Truncated Cone

Round Nose, 2Ogive Radius,Tumble Lube

Truncated Cone,Tumble Lube


2-Cavity Mould LE90321 LE90322 LE90388 LE90303 LE90305 LE90239 LE90464 LE90238 LE90309 6-Cavity Mould LE90295 LE90327 LE90319 LE90692 ---- LE90387 LE90465 LE90402 LE90457

Pistol Moulds

44 Special, 44 Magnum, 44/40 45 Colt, 454 Casull

480 Ruger, 475 Linebaugh 500 S&W 45 ACP, 45 Auto

Rim, 45 Colt

Mfg. Mould # 429-200-RF 429-240-2R TL430-240-SWC C430-310-RF C452-300-RF 476-400-RF C501-440-RF 452-160-RF

Ballistic Coefficient .124 .196 .169 .218 .233 .271 .296 .090 Bullet Diameter .429” .429” .430” .430” .452” .476” .501” .452” Bullet Weight 200 Gr. 240 Gr. 240 Gr. 310 Gr. 300 Gr. 400 Gr. 440 Gr. 160 Gr.

Style Flat Nose Round Nose,2 Ogive Radius

Semi-Wadcutter,Tumble Lube

Round Nose, FlatNose, Gas Check

Round Nose,2 Ogive Radius,

Gas CheckFlat Nose Flat Nose,

Gas Check Flat Nose

2-Cavity Mould LE90285 LE90341 LE90299 LE90858 LE90359 LE90241 LE90991 LE90570 6-Cavity Mould LE90428 LE90339 LE90357 LE90227 LE90228 ---- ---- ----

Pistol Moulds9mm Luger,

38 Super Auto, 380 Auto

9mm Makarov 40 S&W, 10mm 41 Magnum 44 Special, 44 Magnum,

44/40

Mfg. Mould # TL356-95-RF 365-95-1R 401-145-SWC TL401-175-SWC 401-175-TC 410-195-SWC TL410-210-SWC 429-214-SWC C429-240-SWC


Style RoundFlat Nose

Round Nose, 1 Ogive Radius Semi-Wadcutter Semi-Wadcutter,

Tumble LubeTruncated

Cone Semi-Wadcutter Semi-Wadcutter,Tumble Lube Semi-Wadcutter Semi-Wadcutter,

Gas Check

2-Cavity Mould LE90601 LE90466 LE90470 LE90431 LE90256 LE90330 LE90335 LE90336 LE90338 6-Cavity Mould LE90672 ---- ---- LE90433 LE90690 ---- ---- ---- LE90483

Rifle Moulds375 Win,

38/55 45-70 Caliber Rifle 50-70 Caliber

Mfg. Mould # 379-250-RF 457-340-F 457-405-F 459-405-HB 457-450-F C457-500-F 459-500-3R 515-450-F 515-500-F Ballistic Coefficient .250 .211 .225 .250 .250 .278 .443 .220 .283 Bullet Diameter .379” .457” .457” .459” .457” .457” .459” .515” .515” Bullet Weight 250 Gr. 340 Gr. 405 Gr. 405 Gr. 450 Gr. 500 Gr. 500 Gr. 450 Gr. 500 Gr.

Style Flat Nose Flat Nose Flat Nose Hollow Base Flat Nose Flat Nose, Gas Check

Pointed Round Nose Flat Nose Flat Nose

1-Cavity Mould ---- ---- ---- LE90268 ---- ---- ---- ---- ---- 2-Cavity Mould LE90324 LE90373 LE90374 ---- LE90375 LE90376 LE90577 LE90255 LE90266

Rifle Moulds22 Caliber 270 Caliber 7mm 30 Caliber

Mfg. Mould # C225-55-RF C277-135-RF C285-130-R C309-160-R C309-170-F C309-180-R C309-200-R C309-113-F C309-120-R


Style Gas Check,Roud with Flat

Gas Check, Round with Flat

Round Nose,Gas Check,

1 Ogive Radius

Round Nose, 2 Ogive Radius,

Gas Check

Truncated Cone,Tumble Lube,

Gas CheckTruncated Cone,

Gas CheckSemi-Wadcutter,

Gas CheckFlat Nose,Gas Check

Semi-WadcutterTumble Lube,

Gas Check 2-Cavity Mould LE90451 LE90454 LE90360 LE90367 LE90368 LE90369 LE90370 LE90362 LE90364 6-Cavity Mould LE90459 ---- ---- ---- ---- ---- ---- ---- ----

Rifle Moulds

30 Caliber 300 AAC 7.62x39 303 British 8mm 8x56 338 Caliber 35 Caliber

Mfg. Mould # C309-150-F TL309-230-5R C312-155-2R CTL312-160-2R C312-185-1R C324-175-1R C329-205-1R C338-220-1R C358-200-RF


StyleRound Nose,

1 Ogive Radius,Gas Check

Tumble Lube5 Ogive Radius

2 Ogive Radius, Round Nose, Gas

Check

Gas Check, 2 Ogive Radius,

Tumble LubeGas Check,

1 Ogive RadiusRound Nose, Gas Check,

1 Ogive Radius

Round Nose, Gas Check,

1 Ogive RadiusGas Check,

1 Ogive RadiusGas Check,

Round with Flat

2-Cavity Mould LE90366 LE90307 LE90385 LE90361 LE90371 LE90274 LE90775 LE90372 LE90449 6-Cavity Mould ---- ---- LE90741 LE90579 ---- ---- ---- ---- LE90016



Rifle Bullet Moulds

Caliber 22 6mm 25 270 7mm 30 30 30 Mfg. Mould # 22-055-SP 243-095-SP 257-120-SP 270-150-SP 7mm-168-SP 30-115-SP 30-150-FN 30-180-SP Bullet Dia. .225” .244” .258” .278” .285” .309” .309” .309”

Bullet Weight 55 Gr. 95 Gr. 120 Gr. 150 Gr. 168 Gr. 115 Gr. 150 Gr. 180 Gr.

Style Semi-Point, Gas Check

Semi-Point, Gas Check





Flat Nose, Gas Check


2-Cavity Mould RC82007 RC82015 RC82016 RC82017 RC82018 RC82009 RC82019 RC82020 Top Punch # RC85506 RC85509 RC85515 RC85529 RC85531 RC85535 RC85546 RC85541

Pistol Bullet Moulds

Caliber 32 32 32 380 9mm 9mm 9mm 9mm Mfg. Mould # 32-077-RN 32-098-WC 32-098-SWC 38-090-RN 9mm-115-RN 9mm-124-RN 9mm-124-RN-TG 9mm-124-CN Bullet Dia. .311” .314” .314” .356” .356” .356” .356” .356”


Style Round Nose Wadcutter Semi-Wadcutter Round Nose Round Nose Round Nose,

Gas CheckRound Nose

Target Conical Nose



Caliber 9mm 38/357 38/357 38/357 38/357 40/10mm 10mm 10mm Mgf. Mould # 9mm-147-FN 38-148-WC 38-150-SWC 38-158-RN 38-158-SWC 40-180-FN 10MM-170-SWC 10MM-200-SWC

Bullet Dia. .356” .358” .358” .358” .358” .401” .400” .400”


Style Flat Nose Wadcutter Semi-Wadcutter Round Nose Semi-Wadcutter,

Gas Check Flat Nose Semi-Wadcutter

Semi-Wadcutter



Caliber 41 44 44 44 44 44 45 Auto 45 Auto 45 Auto Mfg. Mould # 41-210-SCW 44-225-SWC 44-240-SWC 44-245-SWC 44-250-K 44-300-SWC 45-185-SWC-BB 45-200-SWC 45-201-SWC Bullet Dia. .410” .430” .430” .430” .430” .430” .452” .452” .452”

Bullet Weight 210 Gr. 225 Gr. 240 Gr. 245 Gr. 250 Gr. 300 Gr. 185 Gr. 200 Gr. 201 Gr.

Style Semi-Wadcutter

Semi-Wadcutter, Gas Check

Semi-Wadcutter, Gas Check

Semi-Wadcutter Keith Type Semi-Wadcutter,

Gas CheckSemi-Wadcutter,

Bevel BaseSemi-

WadcutterSemi-

Wadcutter

2-Cavity Mould RC82039 RC82041 RC82042 RC82043 RC82080 RC82079 RC82052 RC82046 RC82047 Top Punch # RC82541 RC82527 RC82527 RC82527 RC82527 RC82527 RC82545 RC82534 RC82545


Caliber 45 45 Auto 45 Colt 45 Colt 45 Colt 45 480 Ruger* 50 AE 500 S&W Mfg. Mould # 45-225-CAV 45-230-RN 45-250-FN 45-255-SWC 45-270-SAA 45-300-SWC 476-400-SWC 50-340-SWC 50-400-SWC Bullet Dia. .454” .452” .454” .454” .454” .452” .476” .500” .500”

Bullet Weight 225 Gr. 230 Gr. 250 Gr. 255 Gr. 270 Gr. 300 Gr. 400 Gr. 340 Gr. 400 Gr.

Style Cavalry Round Nose Flat Nose Semi-Wadcutter Flat Nose Semi-Wadcutter,

Gas CheckSemi-

WadcutterSemi-

WadcutterSemi-

Wadcutter

2-Cavity Mould RC82081 RC82048 RC82049 RC82050 RC82092 RC82083 ---- ---- ----

1-Cavity Mould ---- ---- ---- ---- ---- ---- RC82094 RC82087 RC82099 Top Punch # RC85552 RC82519 RC82506 RC82528 RC82528 RC82528 RC85638 RC85611 RC85639

Rifle Bullet Moulds

Caliber 30 7.62mm 310 Cadet 32 35 375, 38-55 38-55 Mfg. Mould # 30-180-FN 7.62-130-SPL 310-120-RN 32-170-FN 35-200-FN 37-250-FN 378-312-BPS Bullet Dia. .309” .309” .310” .321” .358” .376” .378”

Bullet Weight 180 Gr. 130 Gr. 120 Gr. 170 Gr. 200 Gr. 250 Gr. 312 Gr.

Style Flat Nose,Gas Check

Spitzer Point,Gas Check Round Nose Flat Nose,

Gas CheckFlat Nose, Gas Check

Flat Nose, Gas Check

Semi-Point, BlackPowder Silhouette

2-Cavity Mould RC82014 RC82022 RC82023 RC82024 RC82028 RC82029 RC82090 Top Punch # RC85546 RC85554 ---- RC85550 RC85565 RC85570 RC85608

Rifle Bullet Moulds

Caliber 40 40 40 40 40 416 44-40 Mfg. Mould # 40-300-SP-CSA 40-350-SP-CSA 40-400-SP-CSA 40-400-BPS 40-420-BPS 416-350-FN 44-200-FN Bullet Dia. .410” .410” .410” .410” .410” .417” .428”


Style Semi-Point, C Sharps Arms

Semi-Point, C Sharps Arms

Semi-Point, C Sharps Arms

Black PowderSilhouette

Black PowderSilhouette

Flat Nose, Gas Check Flat Nose

2-Cavity Mould RC82070 ---- ---- ---- ---- ---- RC82036 1-Cavity Mould ---- RC82072 RC82074 RC82086 RC82073 RC82075 ----

Top Punch # RC82520 RC82520 RC82520 RC85609 RC85620 RC85562 RC85595

Rifle Bullet Moulds

Caliber 11mm 45 45 45 45 45 45 Mfg. Mould # 44-370-FN 45-300-FN 45-325-FN-U 45-405-FN 45-500-FN 45-500-BPS 45-530-RN Bullet Dia. .446” .458” .458” .458” .458” .458” .458”


Style Flat Nose Flat Nose, Gas Check

Flat Nose,Universal

Flat Nose,Gas Check

Flat Nose,Gas Check

Flat Nose, BlackPowder Silhouette Round Nose

2-Cavity Mould ---- RC82051 RC82045 ---- ---- ---- ----

1-Cavity Mould RC82093 ---- ---- RC82053 RC82054 RC82085 RC82084 Top Punch RC85585 RC85600 RC85583 RC85600 RC85600 RC85607 RC85621

* Also .475 Linebaugh

RCBS Bullet Mould HandlesSolid steel frames with extra-long, pre-mium hardwood handles for comfort. Perfect for home bullet casting. One size fits all RCBS bullet moulds only.RC80025 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $37.99

Pricing 1 Cavity Mould . . . . . . . . . . . . . . . . . . $84.99 2 Cavity Mould . . . . . . . . . . . . . . . . . . $84.99 RCBS Top Punch . . . . . . . . . . . . . . . . . $10.99Mould Handles not Included.

Pricing 1 Cavity Mould . . . . . . . . . . . . . . . . . . $84.99 2 Cavity Mould . . . . . . . . . . . . . . . . . . $84.99 RCBS Top Punch . . . . . . . . . . . . . . . . . $10.99Mould Handles not Included.


Warning:Melting lead and casting lead objects will expose you and others in the area to lead, which is known to cause birth defects, other reproductive harm and cancer. See instructions on “Reducing Exposure” supplied with product.


Documents

bullet casting bullet casting - Precision Reloadingthe right top punch and sizing die and the 4500 will smoothly size down your bullet to the correct diameter while it evenly applies