...built to last

DURA VISION®

L.E.D WORK LAMPS

INVADER L.E.D WORK LAMP

DURA VISION®

2

95mm 130mm

155mm110mm

SPECIFICATIONS

Wattage 50 Watt

Light Source 5 x 10W Cree L.E.D’s

Light Output (raw) 5260 Lumens

Light Output (effective) 4480 Lumens

Voltage 10V-40V DC

Current Draw 2.3A @ 24V DC

Operating Temp. -40°C to +85°C

Vibration 25G rms*

IP Rating IP68

Connector Type Deutsch DT 2 Pin

Housing Die-Cast Alloy

Lens Construction Polycarbonate

Bracket 5mm 316 S/Steel

Lifespan 50’000 Hours

Net Weight 2.0kg

Mounting Suitable Upright & Pendent

Beams Available Wide Flood, Flood & Euro

PART NUMBERS HEAVY DUTY* LOW PROFILE

Euro Beam DV550LEDEU/Y DV550LEDEU/C

Wide Flood Beam DV550LEDWF/Y DV550LEDWF/C

Flood Beam DV550LEDFB/Y DV550LEDFB/C

The Dura Vision 50W INVADER features the very latest in technology and electronics. Utilizing 5 x 10w USA Cree XML series II LEDs, the Invader produces huge light output from

its extremely compact housing. With ETM (Electronic Thermal Management) coupled with our unique ThermoCOOL PCB, this ensures the INVADER will continue to produce powerful

light output for its entire lifespan of 50,000+ hours. This tough, compact lamp utilizes our tried, tested &

proven DuraFORCE mounting system which will ensure many years of use on

site in the harsh Australian mining industry. Another feature we have added

to the Invader is a 24V DC only option which reduces onsite theft!

Low Profile Option

INVADER FEATURES

DURA VISION®

Waterproof Connectors - For perfect, hassle free

connections.

Tough Polycarbonate Lens

Tough Die-Cast Aluminium Housing

Heavy Duty Stainless Brack-etry & Fixings with Isolating Rubbers to Absorb Vibration

Large Cooling Fins for efficient heat dissipation

High Output 10W Cree USA L.E.D’s with ETM

(Electronic Thermal Management)

Pure Optics - With 90% optically pure L.E.D

optics

3www.ultra-vision.com.au | 1800 66 55 66

Excellent Adjustment

ThermoCOOL TECHNOLOGY

ThermoCOOL technology will reduce LED junction temperature allowing increased, LED life, increased reliability, increased brightness, increased lumens per LED and reduce dollar per lumens.ThermoCOOL technology ensures each LED on the PCB (Power Circuit Board) operates at a significant cooler temperature than that of a standard PCB. The heat from each LED is transferred directly onto the PCB therefore dissipating the heat from the LED more rapidly than a standard PCB which has to transfer heat through the dielectric layer first before heat is transferred into PCB.

LEDs will run 15% - 18% Cooler on a ThermoCOOL PCB vs a standard MCPCB.

Main benefits of ThermoCOOL technology are:• Magnitude Higher Thermal Transfer Rate (210~385 vs 1~4 W/m.k)• Direct Thermal Path, No dielectric in the thermal path-way• Lower LED Junction Temperature• Lowest Thermal Resistance• Longer LED life

Normal PCBInvader PCB

Your Local Dealer:

Ultra Vision Lighting

Free Call: 1800 66 55 66www.ultra-vision.com.au

© Copyright - Ultra Vision Lighting 2015

WHEN PERFORMANCE

MEANS MORE THANTHE BRAND