...built to last

DURA VISION®

L.E.D WORK LAMPS

DURA VISION®

Dura Vision ENFORCER - Designed, Engineered & Built in Australia.The Dura Vision Enforcer has been designed from the bracket up utilizing ground breaking L.E.D technology. Engineered to exacting standards as demanded in the mining industry the Enforcer will stand up to the toughest applications. With its robust die-cast aluminium housing, UV stabilised polycarbonate lens and ultra-heavy duty patented dura-FORCE mounting bracket, this lamp is …built to last!The USA Cree XP-G Gen II L.E.Ds are mounted directly to a solid copper PC board via a graphite substrate, ensuring maximum heat transfer from the core of the L.E.D into the housing for superior cooling capabilities. This ensures that the L.E.Ds maintain its full 50,000 hour life-span as designed.The ENFORCER utilizes a unique shaped silicone based seal ensuring this lamp is rated to IP69 to seal the internals against any water, dust or moisture ingress. Available with over 3 assorted mounting systems the ENFORCER is suitable for almost every application.Ultra Vision has been supplying the mining industry for many years with high quality lighting products and has once again raised the level for heavy duty L.E.D work lamps.

RESEARCH, DESIGN & TESTING

After many years of research and development in L.E.D lighting technology the Dura Vision ENFORCER was de-signed as the ultimate L.E.D work Lamp which can be uti-lized in almost every area of the heavy industry market. The Enforcer brings you 1 ultimate lamp which can be used extensively across almost all Australian mines, reducing large stock levels of an assortment of lamps and providing high levels of light output as required in today’s market.

Some of the top Enforcer Features are:

• IP69 Rating - Totally Waterproof• Copper PCB - Unsurpassed Cooling Capabilities• EMC Tested - Will not Give Radio Interference• 25G rms - Ultra Heavy Duty Vibration• ETM - Electronic Thermal Management• Temp -40C to +85C - Extreme Temperature Range• 24V DC Only - Avoid Theft of Enforcer’s

All Dura Vision products are tried tested and proven to exacting standards making them world class products.

The Dura Vision Enforcer is truly ...built to last.

...built to lastINTRODUCTION

APPLICATIONSEXTREME INDUSTRIES• Mining• Defence• Military• Marine• Racing• Earth moving

HEAVY INDUSTRIES• Mining• Defence• Military• Construction• Recreational• Service Vehicles• Emergency Vehicles• Agriculture• Earth moving• Marine

MEDIUM INDUSTRIES• Mining Light Vehicles• Utility Vehicles• Agriculture• Recreational• Service Vehicles• Emergency Vehicles

FLOOD LIGHTING• Area Flood Lighting• Machinery Flood Lighting• Security Flood Lighting• Lighting Towers

2

ENFORCER FEATURES

DURA VISION®

Waterproof Connectors - For perfect, hassle free connections. The third wire is a dimming option.

Tough Polycarbonate Lens

Tough Die-Cast Aluminium Housing

Multiple Mounting Options - Lower Mount

and Side Mount

Heavy Duty Stainless Bracketry & Fixings with Isolating Rubbers to Absorb Vibration

Long life-span of 50’000 hours

Range of Beam Types Available

Available with Black or Yellow front Rims

Dust & Waterproof IP69 - Inner Rubber

Seal

Large Cooling Fins for efficient heat dissipation

High Output 5W Cree USA L.E.D’s with ETM

(Electronic Thermal Management)

Pure Optics - With 90% optically pure

L.E.D optics

INTRODUCTION

3www.ultra-vision.com.au | 1800 66 55 66

ENFORCER L.E.D WORK LAMP

SPECIFICATIONS OPTION A OPTION B OPTION C OPTION D

Wattage 60 Watt 60 Watt 60 Watt 60 Watt

Light Source 12 x 5W L.E.D’s 12 x 5W L.E.D’s 12 x 5W L.E.D’s 12 x 5W L.E.D’s

Light Output 6100 Lumens 6100 Lumens 6100 Lumens 6100 Lumens

Voltage 9V-32V DC or 24V DC only 9V-32V DC or 24V DC only 9V-32V DC or 24V DC only 9V-32V DC or 24V DC only

Current Draw 2.5A @ 24V DC 2.5A @ 24V DC 2.5A @ 24V DC 2.5A @ 24V DC

Operating Temp. -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C

Vibration 25G rms 25G rms 20G rms 20G rms

IP Rating IP69 IP69 IP69 IP69

Connector Type Deutsch DT 2 Pin Deutsch DT 2 Pin Deutsch DT 2 Pin Deutsch DT 2 Pin

Housing Die-Cast Alloy Die-Cast Alloy Die-Cast Alloy Die-Cast Alloy

Lens Construction Polycarbonate Polycarbonate Polycarbonate Polycarbonate

Bracket 5mm 316 S/Steel 5mm 316 S/Steel 5mm 316 S/Steel 5mm 316 S/Steel

Lifespan 50’000 Hours 50’000 Hours 50’000 Hours 50’000 Hours

Net Weight 2.5 kg 2.4 kg 2.3 kg 2.4 kg

Mounting Suitable All types All types All types All types

Beams Available Wide Flood, Flood & Euro Beam

Wide Flood, Flood & Euro Beam

Wide Flood, Flood & Euro Beam

Wide Flood, Flood & Euro Beam

Warranty 5 Years 5 Years 5 Years 5 Years

Dimming Control Yes (Optional) Yes (Optional) Yes (Optional) Yes (Optional)

PART NUMBERS OPTION A OPTION B OPTION C OPTION D

Euro Beam - Multivolt DV512LEDEU/S DV512LEDEU/B DV512LEDEU/C DV512LEDEU/L

Wide Flood Beam - Multivolt DV512LEDWF/S DV512LEDWF/B DV512LEDWF/C DV512LEDWF/L

Flood Beam - Multivolt DV512LEDFB/S DV512LEDFB/B DV512LEDFB/C DV512LEDFB/L

Euro Beam - 24V DV512LED24EU/S DV512LED24EU/B DV512LED24EU/C DV512LED24EU/L

Wide Flood Beam - 24V DV512LED24WF/S DV512LED24WF/B DV512LED24WF/C DV512LED24WF/L

Flood Beam - 24V DV512LED24FB/S DV512LED24FB/B DV512LED24FB/C DV512LED24FB/L

The all new DURA VISION Enforcer 12 x 5W L.E.D. lamp, offers the very latest, high powered L.E.D technology, ideal for use on heavy duty mining vehicles.

Superbly compact, exceptionally tough, offering a substantial 145 degrees of adjustment, ensures that the new Enforcer work lamp provides your solution to the most demanding applications.The Enforcer features revolutionary high output optics, that produce optimum light levels, along with the utilization of high quality Cree XP-G L.E.D’s, controlled by Electronic Thermal Control.

Electronic Thermal ManagementETM monitors the heat output of the LEDs and makes use of integrated Pulse Width Modulation circuitry in order to maintain safe operating temperatures which prolong the LED life span to its full 50,000 hours.Pulse Width ModulationThe Enforcer Lamp utilizes integrated Pulse Width Modulation (PWM) dimming circuitry to manage heat levels. PWM works by flashingtheLEDatafrequencyfasterthanthehumaneyecandetect, reducing the time that the LED is operating while still delivering 100% light output.

AUSTRALIAN DESIGN REGISTRATION NUMBER 344332

DURA VISION®

4

DURA VISION®

www.ultra-vision.com.au | 1800 66 55 66

BEAM PATTERNS

154mm

150mm

135mm

148mm

99mm

110mm

99mm

110mm

37mm 53mm

Option: A Option: COption: B Option: D

MOUNTING OPTIONS

154mm

37mm 37mm

99mm 99mm

154mm

110mm 110mm

148mm 138mm

5

ENFORCER IN DETAIL

DURA VISION®

xu

t

y

~

}

z

vw

{

|

t

u

v

w

x

y

z

{

|

}

~

COPPER PCB - Superefficientforheattransfer from L.E.D’s to coolingfins.

USA CREE L.E.D - XPG Series II - the latest high output 5W USA Cree L.E.D’s

CLEAR LENS - Tough moulded poly carbonate lens lover to protect Internals.

COLOUR RIM - Can be colour coated to suit any Machinery or Brand type.

L.E.D OPTICS - 90% Optically Pure for maximum light output & performance.

DIMMING OPTION -Lamp can be dimmed if required - it must be connected to an optional, external dimming unit.

SILICON SEAL -Unique 6 ribbed seal to ensure no water or dust ingress - giving an IP69 rating.

BRACKETS -Heavy duty 5mm 316 stainless steel bracketry, with rubber shock isolators.

FIXINGS -Stainless steel bolts, nuts & washers, preventing corrosion.

ALLOY HOUSING -High pressure die-cast alloy housing for strength & efficientheatdissipation.

GRAPHITE SUBSTRATE - An ultra high thermal conductive material. It transfers heat effectively & consistentlytocoolingfins.

DID YOU KNOW?

• REBUILD FEATURE - The DURA VISION Enforcer can be totally rebuilt, this enables nearly any part to be replaced.

• COLOURED RIMS - The Rims can be powder coated the colour of your machinery or brand.*

• COMPLETE YELLOW BODY - The Enforcer is also available in a complete yellow body.

• 24 VOLT ONLY - The Enforcer is also available in a 24V DC version only. This will reduce the risk of theft.

• SILICON SEAL - The Enforcer utilizes a unique 6 ribbed moulded silicon seal, giving the lamp an IP69 Rating.

• BUILT IN AUSTRALIA - The Enforcer work lamps has been designed and is built in Australia. This ensures the highest quality at all times.

• THERMAL MANAGEMENT - When the Enforcer reaches 80°C it will automatically begin to dim, to preserve the life of the L.E.D’s.

• MOUNTING OPTIONS - The Enforcer comes in a range of mounting options to suit your needs.

• COPPER PCB - The Enforcer is one of the only lamps in Australia to feature a solid copper PCB. Copper is one of the best known substances for transferring heat.

6

* Quantities apply

DURA VISION®

www.ultra-vision.com.au | 1800 66 55 66

PART NUMBER DESCRIPTION UNITS

BAR/TUBE MOUNTSDVE512BKT/A Enforcer Side Mount Extreme Duty Brackets - 5mm Pair

DVE512BKT/B Enforcer Side Mount Heavy Duty Bracket - 5mm Pair

DVE512BKT/C Enforcer Side Mount Bracket - 5mm Pair

DVE512BKT/D Enforcer Lower Mount Brackets - 3-4mm Pair

DIMMING SWITCHDVEDIM/A Dura Vision Dial Knob Dimmer Switch (50% -100%) Each

DVEDIM/B Dura Vision Push Button On/Off Dimmer Switch (50% or 100%) Each

UNIVERSAL SWIVEL BRACKETSUVS20 Universal Swivel Bracket Each

UVS30 Universal Magnetic Swivel Bracket with Suction Caps Each

BAR/TUBE MOUNTSPV64BKT 2.5” Bar Mount Light Bracket - Suits 64mm Tube Pair

PV76BKT 3” Bar Mount Light Bracket - Suits 76mm Tube Pair

ANTI-THEFT NUTSPV4ATN Power Vision Anti-Theft Nuts - 10mm Pair

PARTS & ACCESSORIES

VISION®

...built to last

Tube Mounts

Anti-Theft Nuts

Bracket Option A Bracket Option B

Bracket Option C Bracket Option D Dimmer Switch

Swivel Mounts

7

...built to last

Your Local Dealer:

Ultra Vision Lighting

Free Call: 1800 66 55 66www.ultra-vision.com.au