Upload
alan-higgins
View
215
Download
0
Tags:
Embed Size (px)
Citation preview
• Building was designed for optimized material use
• The materials were chosen for their durability and low maintenance requirements
• The roof made from plywood is supported by exposed tongue-and-groove decking
• Redwood was used for the coastal site for its resistance to decay and mildew
• The redwood was also used for the building’s exterior rain-screen cladding
• The wood was milled locally and allowed to become accustomed to new climates and conditions naturally without the typical kiln-drying process to meet its proper moisture content
• The inherent design of the rain-screen wall allows the siding to “breathe” and reducing the chance for water penetration that can lead to mold and indoor air quality
Energy Efficiency
• While the Watsonville Water Resource Center focuses on water conservation, it is also designed to conserve energy while improving building performance and comfort
• The ventilation and heating/cooling systems were separated resulting in a system that is much less energy intensive than a standard forced-air system
• High-efficiency mechanical equipment were used to reduce the amount of energy needed within the building
• Light sensors were also used to reduce the amount of light used
• Natural ventilation, CO2 sensors in open areas, and roof-mounted solar panels further contribute to energy conservation while reducing fossil fuel use and greenhouse gas emissions and also improving the overall building performance