Buck 2010 Catalog

7/22/2019 Buck 2010 Catalog

http://slidepdf.com/reader/full/buck-2010-catalog 1/921

Buckingham BUCKINGHAM AND SAFETY STANDARDS

Product ApplicationOur Responsibilities, and Yours, With Regard to Personal Protective Equipment. • Occupational Safety and Health Administration (OSHA) regulations, American National Standards Institute (ANSI)and the American Society for Testing and Materials (ASTM) address equipment specications for manufacturers of personal

protective equipment (PPE) as well as guidelines for employers regarding the proper use of such equipment.

• We have prepared this catalog to help you select proper PPE for your employees. We also include detailedinstructions on the use and maintenance of PPE with each item we ship.

• OSHA, ANSI and ASTM regulations specify that you are responsible for being fully informed of all safetyregulations and the proper use of PPE systems. You are also responsible for providing PPE to employees who work in

elevated positions or are at risk of a fall. You are responsible fro training your employees in proper use of PPE.

• Your knowledge of your employees’ unique tasks and work locations along with our knowledge of PPE should

enable you to select equipment that, when used properly, will ensure the safety of your employees.

Resources for RegulationsGeneral Industry - OSHA

Boatswain’s Chairs 1910.28 (j)

• Powered Platforms and Building Maintenance 1910.66• Special Industries (Telecommunications) 1910.268 (g)

• Special Industries (Electric Power Generation, Transmission, and Distribution) 1910.269 (g)

Construction - OSHA

Safety Belts, Lifelines & Lanyards 1926.104Denition: Lanyard, Lifeline, & Safety Belt 1926.107 (b) (c) (f)

Scaffolds ( General Reqmts)/Boatswain Chair 1926.451 (b) (2) (i) 1926.451 (g) (1) (i)

Aerial Lifts 1926.453 (b)

Fall Protection Systems Criteria and Practices 1926.502

Steel Erection Fall Protection 1926.760 (d)Power Transmission & Distribution - Linemen’s Boom Belts, Safety Straps and Lanyards 1926.959

ANSI StandardsFall Protection Z359 Fall Protection Code

Tree Care Operations Z133.1

Construction and Demolition Operations A10.32

ASTM StandardPersonal Climbing Equipment F887

Our Guarantee

We guarantee the equipment we manufacture to be free form defects in material and workmanship. We will repair orreplace any equipment defective which is returned to us. This express guarantee supersedes all other expressed or implied

guarantees, obligations or liabilities.

The essence of the aforementioned is that Buckingham Mfg. will:

1. Accept new product returns up to one year after shipment if found defective.

2. Accept new and in resalable condition product up to one year from the date of purchase unless a speciallydesigned product and designated with a “Q” in the product number.

3. Upon its inspection and discretion, repair or replace defective equipment returned and deemed to be defective. If the defect is found to be a fault of the manufacturing process or materials used in the products manufacture, it

will be reworked or replaced at no cost. If the defect is found to be a result of improper use, care, storage, etc.

and is repairable, it will be reworked at a cost determined and based upon the extent of rework. If the defectiveequipment is deemed to be un-repairable, it will be returned as received with a memo indicating the product is

unsafe for further use and should be replaced. In addition, the defective equipment will be marked to indicate itis unsafe for further use.



Email: [email protected] Website: www.ArborCanada.com

Phone: 877-268-8733

“Arbormaster ® is the registered trademark of ArbormasterTraining, Inc. used by license on Buckingham products.”

Email: [email protected] Website: www.arbormaster.com

Phone: 860-429-5028

BUCKINGHAM MANUFACTURINGBuckingham Manufacturing Company has proudly served industrieswith workers who climb wood poles, trees, towers and structures that

support electricity and telecommunications equipment for well over100 years. Whether for work above or below ground in these indus-

tries, we produce safety equipment and specialty tools for work posi-tioning, retrieval, fall restraint, fall restriction, fall arrest and suspensionwork applications. Most people do not think about the importance of

work performed by Arborist and linemen every day and until the pow-er goes out, the telephone/computer stops working or a tree falls on

a house or power line. Our customers maintain and restore servicesin all types of weather. This catalog is a tribute to these highly trained

workers performing dangerous jobs with little recognition!

Buck Tough

Knowing the dangers of these industries, we make our products Buck Tough. They are designed for rough use

and no product is made without thorough testing and inspection. This includes the raw materials, in-processmanufacturing and the nished product.

Buck TestedWhen multiple standards can be applied to a product, Buckingham uses the toughest standard for compliance.And to make sure we are up to date on standards we are members of ANSI, ASTM and CSA.

Buckingham is committed to develop new products for our customers that are top quality and safe. We will continueto listen to our customers to improve existing products and develop new. Our products will be produced with the

utmost attention to quality and safety providing our customers assurance of being Buck Tough and Buck Tested.

Fall Arrest System:A product specically

designed to arrest a fall

from an elevated position.

Suspension System:Equipment designed tosuspend or lower a person

to a work site. Not intendedto arrest a fall.

Fall Restraint System:

Equipment designed & used to

prevent the worker from reach-ing an area where a free fall

could occur.

Work PositioningSystem & LimitedFall Restriction

Device

Retrieval System:

Equipment used to evacuatea person from an area in an

upright position. Not intendedto arrest a fall unless also

equipped for fall arrest.

Product Application

To help you use this catalog, most products are accompanied by a symbol that indicates whetherthe product is intended for fall arrest, work positioning, suspension, retrieval, or fall restraint.

• American Society for Testing and Materials (ASTM)• American Society of Safety Engineers (ASSE)

• Greater Binghamton Chamber of Commerce• International Safety Equipment Association (ISEA)• International Society of Arborculture (ISA)

• National Association of Manufacturers (NAM)• National Association of Tower Erectors (NATE)

• Northeast Public Power Association• Tree Care Industry Association (TCIA)

• United Way

Membership in Professional Trade Associations &Community Involvement



TABLE OF CONTENTSSafety Standards .......................................................................................................................................... 1Your Partner in Safety ................................................................................................................................... 2

Training Aids (Videos & Books) ................................................................................................................... 4

New Products 5Climbers 9

Climber Information & Options ..................................................................................................... 10Tree Climbers ................................................................................................................................ 17Pole Climbers ................................................................................................................................ 19

Climber Accessories 21Climber Pads ................................................................................................................................ 22

Climber Straps .............................................................................................................................. 26Climber Accessories ................................................................................................................ 25,27

Saddles & Belts 29Saddle & Belt Information ............................................................................................................. 30Ergovation® Saddle ...................................................................................................................... 31

Saddles ......................................................................................................................................... 34Arbormaster Series ....................................................................................................................... 37Saddle Accessories ...................................................................................................................... 40

Connecting Devices & Climbing Aids 41Connecting Devices Information .................................................................................................. 42

Throwbags, Slicklines & Big Shot ................................................................................................. 43Friction Savers & BuckBlocks ....................................................................................................... 44Rope & Web Lanyards .................................................................................................................. 45

Eye to Eye & Split Tails .................................................................................................................. 46Fliplines ......................................................................................................................................... 47

Miscellaneous Aids ....................................................................................................................... 48Positioning Straps ......................................................................................................................... 49

Climbing & Rigging 51Chainsaw Lanyards & Accessories .............................................................................................. 52Handled Accessories & Rigging Blocks ....................................................................................... 53

Port-A-Wraps & Accessories ........................................................................................................ 54

Pulleys & Slings............................................................................................................................. 55

Fall Protection 57Shock Absorbing Lanyards .......................................................................................................... 58Rope Snaps & Assorted Hardware ............................................................................................... 61Carabiners .................................................................................................................................... 62

Aerial Belts & Harnesses .............................................................................................................. 63Bucket Truck & Miscellaneous Accessories ................................................................................. 65

Guards & Scabbards 73

Bags & Accessories 79Equipment Bags ........................................................................................................................... 80

Throw Line Bags ........................................................................................................................... 82Miscellaneous Bags & Accessories .............................................................................................. 83

Promotional Products 85

Index 89



Arbor Master Training Video Series III; 45-710D for DVD; accompanied by a study guide and a CEU test.• Chainsaw Safety, Personal Protective Equipment, Components, Starting and Carburetor Adjustment• Chainsaw Maintenance, Engine and Drive System, Bar Maintenance and Sharpening

• Notches, Hinges and Back Cuts• Felling Techniques

• Limbing and Bucking

• Chainsaw Use in Trees

National Arborist Association Pocket Guide Series 45803: The latest safety training products released

by the NAA for the commercial tree care industry. Sold in complete sets only.• Safe Tree Felling• Preventing Electrocution

• Preventing Falls• Identifying Hazard Trees

• Preventing “Struck-By”

Arbor Master Training Video Series: Complete Set of Six Videos that focus on a particular set of skills and are

accompanied by a study guide and a CEU test. 45-700D for DVD.• Introduction to Belay: Equipment and Techniques• Introduction to Climbing Techniques and Equipment

• Introduction to Ropes: Care, Construction, and Limitations

• Introduction to Secured Footlock: Equipment and Techniques• Introduction to Throwline: Equipment and Techniques

• Climbing Knots and Hitches

Videos & Training Aids

45802 The Tree Climbers’ Companion 2nd Edition & 45805 The Tree Climbers’ Companion Spanish

Version:Written by Jeff Jepsont. In addition to covering topics such as knots and hitches, climber safety, and new climbingtechniques and equipment, the 2nd edition also contains information on climbing with spurs, ascending and de-

scending techniques, "tying in," more knots, "tools of the trade," and the revised climbing system (P.R.E.P.). Over 80

new illustrations by Bryan Kotwica makes it even easier to follow and understand.

45-801 Tree Climbers’ Guide:Written by Sharon Lilly, this publication can be used as a reference manual for the tree climber as well as a studyguide for the upcoming ISA Certied Tree Worker Program. This guide contains over 170 illustrations. Chapters in-

clude Tree Health and Science, Safety, Climbing, Pruning, Rigging, Removal and Cabling. Appendices with answers

to the workbook questions, a glossary, and additional references are also included.

45804 The New ANSI Z133.1 Standard: Is an excellent resource for Arborist’s pruning, repairing, maintaining, and removing trees and cutting brush. TheStandard provides work procedures and safety considerations for all Arborists.

“The Art and Science of Practical Rigging” series: 45718D for DVD.Included is a 172 page information book containing an ISA Certication CU test worth 8 credits. Individual titles are:• Introduction To Techniques and Methods • Advance Limb Removal

• Equipment And Ropes • Compound Rigging Techniques• Rigging Knots • Understanding Forces In Rigging

• Basic Limb Removal • Top Removal And Rigging Heavy Wood

Arbor Master Training Video Series II; 45-707D for DVD; accompanied by a study guide and a CEU test.• Innovations in Climbing Equipment• Rigging, Knots, Rope Slings & Eye Splices

Basic Training for Tree Climbers: 45-717D for DVD.• Getting Started• Rope Installation and Techniques for Ascending

• Using Climbing Spurs• Tying In and Positioning Strategies

• Working the Tree



Courtesy of Husqvarna


http://slidepdf.com/reader/full/buck-2010-catalog 6/926Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425

www.buckinghammfg.com

Buckingham Manufacturing New Products N E W

169062 - All the ben-

efits of the originalErgovation® Tree

Saddle with a bridgeand 2 sliding dees.

169064 - The original

Ergovation® TreeSaddle with an SRTbridge. Ideal for a

Single Rope Techniqueclimbing system with anadd-on harness.

FULLY ASSEMBLED ERGOVATION® TREE SADDLES

ERGOVATION® BRIDGE OPTIONS - CAN BE PURCHASED SEPARATELY

WE9 - Sliding Ring RopeBridge (option 9)

WE8 - Sliding Ring WebBridge (option 8)

WE2 - Sliding DeesBridge (option 2)

WE3 - Multi Loop Bridge(option 3)

WE1 - 4 Dee FixedBridge (option 1)

WES1 - SRT Bridge [SingleRope Technique] (option S1)

ERGOVATION® TREE SADDLE ACCESSORIES - SOLD SEPARATELY

WES1 - SRT(option S1)[old style SRT can be ordered with P/N WES]

P1 - Rigid Leg Pads (option P1): leg pads that featurea preformed rigid fiberglass

support to dramatically de-

crease pressure to the leg’swhile working aloft for long dura-

tions. Decreases pressure to the legs, especially in

the femoral region.

P2 - Semi Rigid Leg Pads (option P2): increased

support for users whospend extended amountof time in suspension.

Decreases pressure tothe legs, especially in the

femoral region.

1300010GPack of 8 Gear Loops & 4 Elastic Retainers




Buckingham Manufacturing New Products N E W

• Increased surface area to distribute pressure • Cinch loop to provide an extra tight t

• Steel 'C-Pad' insert for proper climber shank position • Rolled edge to prevent chang

3202C Big Buck Velcro Wrap Pad

6909A

Snap on Gaff Guard fits all

Buckingham replaceablepole gaffs with a 16° angle

(A style).

OSHA requires gaffguards when climber

is not in use.

I M P R O V E D

Model 1371 - Saddle with Wide Padded Leather Lined

Back. Provide superior comfort and support from the 5 1/2”

wide back support constructed with rubberized belting ma-terial, 1/4” thick foam, and lined with soft top grain leather.

The seat section consists of 3” wide cotton webbing rein-forced with 1 3/4” nylon and lined with soft top grain leather.

Model 1380 - 4 Dee Single Thick Cotton Back Saddle. Light-

weight in design and economical without sacricing quality.

constructed with 3” single thick cotton webbing, reinforced wit1 3/4” nylon on the back and seat sections.

Buckingham was the rst manufacturer

to introduce the industry to the

revolutionary idea of the Velcro wrap

pad. This innovative commitment

to climber comfort has led to the

production of the Big Buck Velcro pad. The Big Buck Velcro pad is a combination of your two

favorite climber pads. We have taken the adjustability of the Velcro wrap pad, the increased

surface area of the Big Buck pad and added a moisture wicking Dri-lex lining. Features also

include:

7” diameter

x 20” long

Ultra light bag made of super heavy duty materials; can be worn in manynew ways: e.g. attached to the leg or to the saddle [requires 2 carabiners

to attache to back of saddle].

• Includes two 2" elastic straps which allow easy fastening of bag to usersleg regardless of size or shape.

• Zippered expansion sleeve to allow easy stufng of climbing line forstorage and reinforced sides are stiff for easy stufng.

• Large grommet on the bottom of the bag allows both ends of rope to be

used during rescue or working operations.• Made with 22 oz. vinyl and climbing grade webbing with double

reinforced seams.• Draw string skirt closure allows for easy deployment and storage while

aloft.

• MOLLE webbing stitched along bag seams allows user to change positio

of elastic straps or can be used for easy storage of accessories.

4369B3 BuckTube Rope Bag




Buckingham Manufacturing New Products

Buckingham's line of rigging blocks (also known as a false crotch) are designed to eliminate virtually all friction when remov-

ing heavy limbs. Also used to create a crotch where a natural one is not available.

Designed to reduce premature wear on climbing lines and eliminate damage to tree limbs normally caused by excess friction! Allows the user to install the blocks high

into a tree without climbing: the blocks are set, and removed, from theground or another tree using a plastic ball, a throwline and throwbag.

The dual housings are color coded to distinguish which block has the

small opening to anchor the plastic ball for setup and removal. Once set, the two part rope channel snaps together using powerful magnets inset

within the system’s self aligning frame. When installed, the BuckBlocksRigging System creates a basket style hitch which results in evenly loading

the two legs of the sling. The design is lightweight, provides a better bend

radius for rope, an improved running surface with its dual rotating sheaves and the rope sling can easily be replaced. Designed in conjunction with Arborists

Scott Winningham and Scott Prophett.

The BuckBlocks Rigging System is rated to a working load limit of 3 tons. Sheave capacity: 5/8” rope.

BuckBlocks Rigging System Model 5006L (Patent Pending)

N E W

5555CT A green carhartt zip up jacket with two front pockets. Features the

Buckingham logo on the front. Available in S, M, L, XL & 2X.

The Bee-Line 3/8” (10mm) single eye stitched split tail offers the user the

ability to make a Blake’s or Tautline hitch onto their climbing line for ascending

and for maneuvering around the tree. The two inch stitched pattern creatingthe eye is covered with heat shrink tubing for longer wear. The stitched eye

is tested to meet a minimum 5,000 lbs. tensile pull. IMPORTANT: all split tailknots shall have a stopper knot and must be set before using.

Model 39ST8P

The Bee-Line 3/8” (10mm) eye to eye stitched tail allows the user to cre-

ate a closed friction hitch such as the Schwabisch prusik or the Distel.There are other hitches too; all require the user to practice tying and use

prior to working at heights. The two inch stitched pattern creating the

eyes are covered with heat shrink tubing for longer wear. The stitchedeyes are tested to meet a minimum 5,000 lbs. tensile pull.

Model P9J8P-10-30

BuckBlocks Climbing System Model 5006S (Patent Pending)

BuckBlocks are ‘Buck Tough’ and makeascending and descending easier with

running sheaves and better rope bendradius.Benefits Include:

• Rotating Sheaves - No Friction• Less Bend Radius to Rope

• Installed and Retrieved from the Ground

• Blocks Are Color Coded• Accommodates up to 1/2”” Climbing Line

• Used As False Crotch


http://slidepdf.com/reader/full/buck-2010-catalog 9/92Courtesy of ArborMaster® Training




CLIMBER INFORMATION & OPTIONSWe at Buckingham are committed to making sure that our equipment can help you be safe at work. Our skilled crafts-

men make the widest choice of climbers and options to provide each user with proper t and comfort. All of our leg

irons and gaffs are inspected throughout the manufacturing process and samples from each lot are tested to destruc-

tion. Buckingham climbers are rated to 350 lbs. when the user is fully outfitted with tools and equipment.

Inspect Your Climbers As Well AsAll Safety Equipment Before Each Use!

Twisted Shank A twisted shank follows

the contour of the calf

muscle to help reduce

chang. (Add sufx ‘T’ to

part #.)

Contoured& Non Contoured Shank

The Contoured Shank top is straight withan outward projection to accommodate

the ankle bone. The Non Contoured

Shank is straight from the top of the

sleeve to the base of the gaff.

Offset& Straight Stirrups

A straight climber stirrup restsslightly on the back of the arch.

An offset climber stirrup sits in

the center of the foot.

OffsetStirrup

StraightStirrup

TwistedShank*

Non ContouredShank (T)

ContouredShank (TB)

Adjustable Length

Climber SleevesStandard

Chrome Sleeve

[9204]

Long Chrome

Sleeve [9202](See How to

Order Climbers

on the next

page for sleeve

ranges and

widths.)

Cleated Climbers

ModelTB95089S

With 2 threaded

replaceable cleat

like logger spikes

in the stirrup of

the climber fortraction climbing

in wet & in damp

conditions. Sold

with 12 replace-

ment cleats &

wrench. To order,

add an ‘S’ sufx

to the climber

number.

Replaceable Gaff ClimbersScrew Style Replaceable Gaff:

Available on all Titanium and Steel

replaceable gaff climbers.

Pin Style Replaceable Gaff: for

all existing steel replaceable gaff

climbers in the eld. Buckingham

no longer manufactures pin style

replaceable gaff climbers.

Gaff Types Permanent Pole:

• Standard 1 3/4” [4.4cm]

• CCA 1 5/8” [4.1cm]

Permanent Tree:

• Tree 3 ½” [8.9cm]

Screw Style Replaceable Pole:


• CCA 1 5/8” [4.1cm]Pin Style Replaceable Pole:


• CCA 1 11/16” [4.3cm]

Replaceable Tree:

• Tree 2 ¾” [7cm]



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425

www.buckinghammfg.com11

Daily Climber Inspection Requirements• Visible Cracks - usually a ne jagged line• Cuts or marks in the steel - create stress risers causing the

climber to break at that point

• Make sure loop on climber sleeve is secure

• Make sure footstrap ring or loop is secured to climber stirrup• Use two fasteners to secure the sleeve to the climber• Inspect climber straps for cuts and excessive wear

• Make sure the pad loops are secure and free of cuts and arenot worn thin

• Inspect climber stirrup to be sure it's not worn too thin

IF ANY OF THESE CONDITIONS EXIST, DISCONTINUEUSE IMMEDIATELY.

Proper Fit & ComfortBuckingham believes that proper t and comfort affect a person’s ability to climb. An ill-ttingclimber distracts the wearer. This is why we offer the industry’s widest choice of climber styles andfeatures.

How to Size Your ClimberProper t is important to your comfort and safety. Correct climber length is normally measured fromthe boot sole under the instep to a point 1/2" below the bone projection just below the knee joint.

There are long sleeves available and they are generally preferred by people over 6’2". NOTE: Pullyour pant cuffs up slightly just below the knee before fastening the leg strap... it provides greatermobility to climb.

How to Order ClimbersThe proper t of a climber requires the leg iron, with pad attached, to extend from the instep to about ½” below the bot-

tom of the inside projection of the knee joint.Climber adjustment varies based on style of climber and the sleeve length. Standard length sleeves 9204 are included

unless long sleeves are requested by adding the sufx ‘L’ to the product number.

Standard sleeves permit leg length adjustment from 16 1/4" to 18 3/4" for standard width stirrup climbers [40cm to 48cm]using two fasteners, 14 1/2" to 17 1/4" [37cm to 42cm] with narrow stirrup style climbers.Long sleeves 9202 may be ordered at a slight extra cost. These permit length adjustment from 19 1/4" to 21 3/4" [48cm to

55cm] for standard width stirrup climbers, 17 1/4" to 20 1/4" [37cm to 51cm] with narrow stirrup climbers. Add sufx ‘L’ tothe climber catalog number for long sleeves.

Tape Measuring

Strength & Reliability• Buckingham climber leg irons are manufactured from selected high

strength grades of steel and titanium. Gaffs are forged from a quality steel.• Before, during and after manufacturing Buckingham climbers from every

production lot undergo rigorous testing. They are subjected to physicalabuse far beyond that encountered in normal use.

• Ductility Test: Leg irons are bent 180° around a two inch diameter man-drel. Gaff tips are bent 3/4" beyond normal position. Tested climbers arethen examined by magnaux to check for cracks.

• Gaff security is checked then reexamined for loose gaffs.• Hardness of steel in both leg irons and gaffs are rechecked through Rockwell readings.

• Gaffs are magnaux inspected to ensure there are no aws in the forging.• Upon completion, every climber is reviewed to insure the gaff angle, position and the contour meets very tight tolerance• Once the gaff has been nal honed, it is inspected to make sure width, thickness, length, and radius meet the specied

requirements.

• Random sample climbers are fatigue cycle tested to simulate a lineman climbing a pole.• The deformation test is to aid in the elimination of climber fatigue in the event a climber is used in an unusual manner

such as descending a pole with large steps.• Buckingham climbers are tested for persons with weight up to 350 lbs when fully equipped.

This is what happened to a climber with a stressriser. Someone chiseled their initial 'L' into theclimber shank. It eventually broke in the spotthe shank was initialed.

RULE OF THUMB: BUCKINGHAM RECOMMENDS THAT ALL REPLACEABLE GAFF CLIMBERS BE

REPLACED WHEN THE ORIGINAL GAFF AND ONE REPLACEMENT SET OF GAFFS HAVE BEEN WORN OUT

FROM NORMAL USE.




PROPER GAFF SHARPENING PROCEDUREA climber gaff improperly sharpened may be as dangerous as a gaff not sharpened at all. The gaff radius tip

is critical for gaff penetration. A needle point gaff could result in breakage. Follow the instructions to be sure ofproper maintenance and have a qualied person inspect your work.

1. Place climber in a clamp with blockson each side to protect the climber.

2. File gaff from heel to tip in a smooth over

and down motion. Hint - color in gaff with blackmarker to ensure you are taking material off

evenly. Never le across or against the grain asit creates stress risers which may cause gaff to

break. Never le the beehive of gaff.

3. Slot marked “Correct” on the gaff

gauge should be your GUIDE to propershaping of the gaff tip. 4. Never use a pole gaff shorter than 1 1/4" long.

Never use a tree gaff shorter than 2 1/4" long.

6. Check thickness of stirrup to ensure it is thick

enough to support your weight.

5. Check gaff width and thickness at the 1/2"and 1" windows as illustrated in the instruc-

tions included with the gaff gauge.



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


HOW TO PERFORM THE POLE CUT OUT TEST FOR TREE & POLE CLIMBERS

(C) Making certain that the strap loopis held against the pole with pressure

from the leg, gradually exert full pres-sure of the foot straight down on the

stirrup without raising the other foot offthe ground so as to maintain balance if

the gaff does not hold.

(A) Place the climber on the leg, holdingthe sleeve with the hand, palm facing

the pole. With the leg at about a 30°

angle to the pole and the foot about 12inches off the ground, lightly jab the gaff

into the pole to a distance of approxi-

mately 1/4".

(D) The point of the gaff shall cut intothe wood and hold. The pole surfacecut shall not be longer than 2 inches,

measured from the point of gaff entry

into the pole to the bottom of the cuton the pole surface.

(B) Keeping enough pressure on thestirrup to keep the gaff in the pole but

not so much as to cause the gaff to

penetrate any deeper, push the climb-er and the hand toward the pole by

moving the knee until the strap loop of

the sleeve is against the pole.

INSPECTION IS YOUR RESPONSIBILITY!

RULE OF THUMB - REPLACEABLE GAFF - CLIMBERS SHOULD BE CHANGED OUT ONLY ONCE IF

ORIGINAL SET WEARS OUT THROUGH NORMAL USE.

HOW TO PERFORM THE PLANE TEST FOR TREE & POLE CLIMBERSThis test may be used to determine that the gaff is correctly shaped and sharpened to properly penetrate the pole.

Place the climber on a at, soft pine or cedar board as shown in Fig. 1 below. Holding it upright with the shank paral-lel to the board, but with no pressure on the stirrup, push the climber forward along the board. If the gaff is properly

shaped and sharpened and if the gaff angle with the wood is sufcient, the gaff point will dig into the wood and beginto hold within a distance of approximately 1" (2.54cm). If the climber gaff slides along the wood without digging in, or

merely eaves a mark or groove in the wood as shown in Fig. 2 the gaff is either not properly sharpened and shaped orthe gaff angle is too small. The gaff angle is built into the climber by the manufacturer and should be between 11 and 17

degrees with the climber placed parallel to the surface of the wood.




Pin Style Steel Replaceable Gaffs

Buckingham Replacement GaffsThe Buckingham replaceable gaff climber came to being in WWI so the servicemen could climb both trees and

poles, and if gaffs became damaged it was easier to carry spare gaffs rather than a whole set of climbers. Weoffer two styles of replaceable gaffs: we continue to supply the original with driv-lok pin attachment for those

types of climbers still in the eld and the screw style, available on our titanium and steel replaceable climbers.

How to Change Screw Style Gaffs on Buckingham Climbers

Figure

1

Figure 2

Figure3

Figure4

PATENTED

9206: pole gaffs as sup-

plied on pole climbers 9209(straight) and 9409 (offset).

9306: tree gaffs as sup-plied on tree climber 9309

(straight), and 9509 (offset).

9106: CCA (Copper

Chromate Arsenic) pole gaff

designed to penetrate hardCCA poles with ease. Sup-

plied on steel 9109 (offset)and 9009 (straight).

NOTE: To order replacement screws order Model 11T (4/pkg.); To order replacement pins order Model 11 (4/pkg.)

Screw Style Replaceable Gaffsfor Titanium and Steel Climbers

T9106A: 16 degree angled

replaceable CCA pole gaffsdesigned to penetrate hard CCA

poles with ease. To be used withall T, TB & SB climbers.

TB9306: tree gaffs as suppliedon all titanium and steel tree

climbers.

T9206A: 16 degree angledreplaceable pole gaffs. To be

used with all T, TB & SB climbers.

GAFF REMOVAL1. Secure the climber such that the heads of the hex head fasteners are facing you

(Buckingham Mfg. recommends using a vise with protective jaw covers or smallwooden blocks to secure the climber).

2. With a 5/32” hex head wrench loosen and remove the two hex head screws. See

g. 1.3. To remove the gaff from the climber place the gaff on a soft surface such as a

block of wood and strike the ridge of the gaff 5/8” from the tip of the gaff. The gaffwill come out of the slot. See g. 2.

4. Ensure no damage is done to the climber or climber slot.

GAFF INSTALLATION1. The climber slot and gaff lug are both manufactured for a precision t. The climb-

ers are then given a protective powder coat nish that may impede the insertion ofgaff into climber slot. The nish may be removed from the boss hole and the gafflug with ne emery cloth.

2. Press the front of the gaff lug into the climber leg iron slot. (A light coat of grease

will ease insertion). It may be necessary to drive the gaff in by striking the back

ridge of the gaff on a soft surface such as a block of wood. See Fig. 33. Insert the two black grade 8 screws and tighten using a 5/32” x 2 ¾” length Allen

wrench. Hand tighten with maximum torque to achieve complete and maximum

tightness. This method can yield Buckingham’s 136 inch pound tightening rec-ommendation for these fasteners. Note: use of a longer wrench can yield resultsexceeding the 136 inch pound recommendation and result in stripping of the screwhead. Visually inspect to ensure screw heads are ush with the inside surface of

the climber leg iron. See g. 4.4. Screw fasteners should be replaced after the rst time removed. If re-using, apply

a low to medium strength thread sealant (Loctite® or equivalent) to prevent screwsfrom loosening. Screws may not be removable if a permanent type thread sealant

is used.



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


How to Change Pin Style Gaffs on Buckingham Climbers

GAFF REMOVAL1. Drive Lock Pins are always driven in from the right side of

the climber and must be driven out from the left side. 2.

To determine the left side hold the climber parallel to the

ground with the gaff on top and gaff tip pointing away fromyour body (see Fig. 1).

3. Secure the climber such that the left edge (as determined in

step 2) is facing up. Buckingham Mfg. recommends using a

vise with protective jaw covers or small wooden blocks to

prevent the climber from being marred (Fig. 2).

4. Drive the installed pin part way out with one of the sup-

plied extra pins or a straight sided punch (smaller than 1/8”

diameter, but not less than 3/32”) so it may be grasped and

removed with piers or a vise. ·If using an extra pin drive the

smooth side of the pin through the pinhole. Do not drive the

uted portion of the pin into the pinhole (see Fig. 9). ·If using

a punch drive the inserted pin through the pinhole and remove punch.

5a. If using pliers grasp the inserted pin and pull downward. Grasp the driven pin and pull

upward (Fig. 3). (Rotating the pin while pulling may ease removal).5b. If using a vise place the exposed portion of the installed pin in the vise and tighten.

Place a small block of wood against the climber. While holding the climber strike the

wood block with a hammer until the pin is removed (Fig. 4). Rotate the climber and re-

move the other pin. Never directly strike the climber with a steel hammer.

6. To remove the gaff from the climber, strike the ridge of the gaff approximately ½” from

the tip on a soft surface such as a block of wood (Fig. 5). Ensure no damage is done to

the climber or climber slot.

7. Repeat the above procedure for your other climber.

PARTS LIST• May include any one pair of the following Gaffs: PN 9106 for climbing hard CCA poles, PN 9206 for climbing stan-

dard poles or PN 9306 for climbing trees.

• 2 Drive Lock Pins for attaching gaffs (2 extra pins included)

Fig. 6 Fig. 7

Fig. 8

Fig. 9

Fig.1

Fig. 2

Fig.3

Fig.4

Fig.5

GAFF INSTALLATION1. The climber slot and gaff lug are both manufac-

tured for a precision t. They are then given a

protective powder coat nish that may impede

the insertion of gaff into climber slot. This nish

may be removed from the boss hole and the gaff

lug with ne emery cloth.

2. Press the front of the gaff lug into the front of the

climber slot (Fig. 6). (A light coat of grease will

ease insertion).

3. It may be necessary to drive the gaff in by strik-

ing the top ridge of the lug end of the gaff on asoft surface such as a block of wood (Fig. 7).

4. Ensure the pinholes of the gaff and the climber

slot are properly aligned.

5. Lightly grease the smooth end of the Drive Lock Pin (Fig 9).

6. Insert smooth end of the Drive Lock Pin into the pinhole on the right side of the

climber (See Gaff Removal step 2 to determine the right or left side of the climber).

7. Using a hammer squarely strike the Drive Lock Pin so that it passes completely

through the lug of the gaff and into the climber pinhole on the left side (Fig. 8). The

head of the pin should be ush with the right side of the climber.




Buckingham Manufacturing has been producing climbers in

Binghamton, NY since 1896. The same craftsmanship that went into our

climbers over a century ago is still in effect at Buckingham today. This vast

experience combined with modern technology helps to keep Buckingham on

the cutting edge of climber development.

Buckingham's latest climber development is the Titanium climber. Titanium is

a strong, light metal. It is strong like steel, 45% lighter than steel and is twice as

strong as aluminum.

All these characteristics of titanium give this climber it's strength, durabilityand lightweight character making Buckingham Titanium climbers safe, and

comfortable as well as a providing an excellent return on investment due to

durability.

The Buckingham Titanium is the strongest, lightest and most versatile•

American Made climber on the market.

The Buckingham Titanium allows for a non contoured, contoured and even•

a twisted shank in a light weight climber. Current aluminum climbers in themarketplace do not have the versatility to offer these benets.

The Buckingham Titanium is much more durable than other lightweight•

climbers. The suggested life of the Buckingham Titanium is the original set of

gaffs and one replacement through normal use. Current aluminum climbers

in the marketplace suggest replacement after 5 years.

The Buckingham Titanium offers an optional patented “serrated” CCA gaff.•

This gaff offers the best penetration available for CCA poles. This Gaff is

available for all Buckingham climbers.

The Buckingham Titanium with its lower gaff position and 16 degree gaff•

angle offers 'extra forgiveness'. This is an excellent benet especially for new

apprentices.



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


350lb.**RATED

Titanium Contoured Shank Permanent Gaff Tree Climbers

**Buckingham Climbers may be used by persons weighing 350 lbs.when fully outtted with tools and equipment.

Titanium Contoured Shank Replaceable Gaff Tree Climbers

SILVERCOLORED

SILVERCOLORED

OFFSET

MODEL #

STRAIGHT

MODEL #

LEATHER

LEG STRAPS

LEATHER

FOOT STRAPS

NYLON

LEG STRAPS

NYLON

FOOT STRAPS

CLIMBER

PADS

TB9508 TB9308 21341

TB95089 TB93089 21391

TB9505 TB9305 2234 21341 3122

TB95059 TB93059 2239 21391 3122

*

*

P o p u l a r C h o i c e

*Indicates a complete set including leg irons, gaffs, foot & leg straps and climber pads.

OFFSETMODEL #

STRAIGHTMODEL #

LEATHERLEG STRAPS

LEATHERFOOT STRAPS

NYLONLEG STRAPS

NYLONFOOT STRAPS

CLIMBERPADS

- TB91428R 21341

- TB91429R 21391

- TB8142R 2234 21341 3122

- TB81429R 2239 21391 3122

*

*


*Indicates a complete set including leg irons, gaffs, foot & leg straps and climber pads. **For climbers with a narrow stirrp order TB97089

*Available on all Buckingham pole climbers; add suffix T to the part #.

Climber accessories and replacement parts arefound in the 'CLIMBER ACCESSORIES' section.

* *

Twisted Shank*(T suffix)

e.g. TB94089AT

Offset

Stirrup

Straight

Stirrup

ContouredShank (TB prefix)

e.g. TB94089A

Non ContouredShank (T prefix)

e.g. T94089A

NarrowStirrup




350lb.**RATED

Steel Contoured Shank Permanent Gaff Tree Climbers


**Buckingham Climbers may be used by persons weighing 350 lbs.

when fully outtted with tools and equipment.

Steel Contoured Shank Replaceable Gaff Tree Climbers

BLACKCOLORED

BLACKCOLORED OFFSET

MODEL #STRAIGHTMODEL #

LEATHERLEG STRAPS

LEATHERFOOT STRAPS

NYLONLEG STRAPS

NYLONFOOT STRAPS

CLIMBERPADS

SB9508 SB9308 21341

SB95089 SB93089 21391

SB9505 SB9305 2234 21341 3122

SB95059 SB93059 2239 21391 3122

*

*



**For climbers with a narrow stirrup order SB97089

STRAIGHTw/ RING

LEATHERLEG STRAPS

LEATHERFOOT STRAPS

NYLONLEG STRAPS

NYLONFOOT STRAPS

CLIMBERPADS

91428R 21341

91429R 21391

8142R 2234 21341 3122

81429R 2239 21391 3122

*

*P o p u l a r C h o i c e


* *

* *

Twisted Shank*

(T suffix)e.g. TB94089AT

Offset

Stirrup

StraightStirrup

ContouredShank (TB prefix)

e.g. TB94089A

Non Contoured

Shank (T prefix)e.g. T94089A

Narrow

Stirrup

*Indicates a complete set including leg irons, gaffs, foot & leg straps and climber pad **For climbers with a narrow stirrup order SB97089



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


350lb.**RATED

Titanium Contoured Shank Replaceable Gaff Pole Climbers

Titanium Non Contoured Shank Replaceable Gaff Pole Climbers

GOLD

COLORED

CHROMECOLORED


**For climbers with a narrow stirrup order SB97089

OFFSETMODEL #

STRAIGHTMODEL #

LEATHERLEG STRAPS

LEATHERFOOT STRAPS

NYLONLEG STRAPS

NYLONFOOT STRAPS

CLIMBERPADS

TB9408A TB9208A 21341

TB9108A TB9008A 21341

TB91089A TB90089A 21391

TB9405A TB9205A 2234 21341 3122

TB9105A TB9005A 2234 21341 3122

TB94059A TB92059A 2239 21391 3122

TB91059A TB90059A 2239 21391 3122

*

*

*

*


OFFSETMODEL #

STRAIGHTMODEL #

LEATHERLEG STRAPS

LEATHERFOOT STRAPS

NYLONLEG STRAPS

NYLONFOOT STRAPS

CLIMBERPADS

T9408A T9208A 21341

T94089A T92089A 21391

T9405A T9205A 2234 21341 3122

T94059A T92059A 2239 21391 3122

*

*


SILVER

COLORED

Titanium Contoured Shank Permanent Gaff Pole Climbers

**Buckingham Climbers may be used by persons weighing 350 lbs.

when fully outtted with tools and equipment.


OFFSETMODEL #

STRAIGHTMODEL #

LEATHERLEG STRAPS

LEATHERFOOT STRAPS

NYLONLEG STRAPS

NYLONFOOT STRAPS

CLIMBERPADS

TB9847 TB9646 21341

TB98479 TB96469 21391

TB8747 TB8646 2234 21341 3122

TB87479 TB86469 2239 21391 3122

*

*

* *




OFFSETMODEL #

STRAIGHTMODEL #

LEATHERLEG STRAPS

LEATHERFOOT STRAPS

NYLONLEG STRAPS

NYLONFOOT STRAPS

CLIMBERPADS

SB9408A SB9208A 21341

SB94089A SB92089A 21391

SB9405A SB9205A 2234 21341 3122

SB94059A SB92059A 2239 21391 3122

350lb.**RATED

**Buckingham Climbers may be used by persons weighing 350 lbs.when fully outtted with tools and equipment.

Steel Contoured Shank Permanent Gaff Pole Climbers

BLUECOLORED

BLACKCOLORED



OFFSETMODEL #

STRAIGHTMODEL #

LEATHERLEG STRAPS

LEATHERFOOT STRAPS

NYLONLEG STRAPS

NYLONFOOT STRAPS

CLIMBERPADS

9847 - 21341

98479 - 21391

8747 - 2234 21341 3122

87479 - 2239 21391 3122

*

*

p u l a r i c e

Po p u l a r h o i c e



* *

**For climbers with a narrow stirrup order 91429NR

* *

Twisted Shank*(T suffix)

e.g. TB94089AT

OffsetStirrup

StraightStirrup

Contoured

Shank (TB prefix)e.g. TB94089A

Non ContouredShank (T prefix)

e.g. T94089A

NarrowStirrup

*

*

**For climbers with a narrow stirrup order SB96089A

Steel Contoured Shank Replaceable Gaff Pole Climbers






Buckingham was the rst manufacturer to introduce the

industry to the revolutionary idea of the Velcro wrap pad.

This innovative commitment to climber comfort has led to

the production of the Big Buck Velcro pad. The Big Buck

Velcro® pad is a combination of your two favorite climber

pads. We have taken the adjustability of the Velcro wrap pad,

the increased surface area of the Big Buck pad and added a

moisture wicking Dri-lex lining. Features also include:

• Increased surface area to distribute pressure

• Steel 'C-Pad' insert for proper climber shank position

• Cinch loop to provide an extra tight t

• Rolled edge to prevent chang

NEW 3118 Big Buck Climber Pad

CLIMBER PADS

Climber pads are a major factor in the user’s comfort. At Buckingham we offer more styles ofpad options than any manufacturer.

The 3118 Big Buck climber pad utilizes a double strap

system, that ts 1” and 1 1/4” straps, to secure the

pad to the calf resulting in superior support of the leg.

Requires 2 pair of leg straps and comes with a pair

of 2639 straps. An angled metal insert prevents the

climber shank from shifting on the calf and the thick

padding adds to the overall comfort making this climber

pad a favorite among linemen and arborists.

Measures 9” H x 12 1/2” W

3119

6909A Snap on Gaff Guard

fits all Buckingham replace-able pole gaffs with a 16°

angle (A style).

NEW

OSHA requires gaffguards when climber

is not in use.

The 3119 Underpad - A Velcro® Padded Leg protec-tor that mounts directly to the leg and underneath a

standard climber pad. Provides an additional 1/4" of

padding to protect the calf from being rubbed by theclimber shank. Ideal for apprentice training. An elastic

strap with Velcro® closure makes it easy to get on andoff. It is recommended that users add an additional 2"

of length to the top

strap for a comfort-able t and

adjustment. ONESIZE FITS ALL.

10"H x 8 1/2"W

3202C Big Buck Velcro Wrap Pad



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


VELCRO® CUSHION WRAP PADS WITH METAL INSERTSThe Velcro® Pad with a metal insert is offered in a straight or angled design with or withoutthe cinch design. The metal insert is designed to keep the climber shank stationary to reducechang to the leg.

StraightAngled3502 3504

VELCRO® PADS WITH A METAL INSERTFOR BUCKINGHAM TITANIUM/STEEL & BASHLIN ALUMINUM/STEEL CLIMBER

To t Klein climbers add the sufx "KL" to the model number.

Example: 3502KL or 3502CKL

The Velcro® Pad with metal inserts does not t Stringer Brooks climbers.

Type Continuous Wrap Cinch Loop

4" Angled 3502 3502C

4" Straight 3504 3504C

VELCRO® PADSWithout Cinch With Cinch

Model Number of Velcro ® Padsw/o the Metal Insert

Wrap Width

3"

4"

Continuous Wrap

3503

3500

Cinch Loop

3503C

3500C

• Continuous Wrap

• Ideal for Rodeos

• Pass Strap through the

cinch loop

• Pull Tight & Secure Velcro

Closure

Daily inspection should be done to ensure user’s safety. Inspect checkpoints for climber pads:

• torn stitching

• ripped or torn leather

• loose/damaged rivets

• Velcro® that does not adhere

• damaged cinch loop

• Velcro® wraps to minimum wrap label (longer Velcro

straps available)




CLIMBER PAD

35032

Angled with metal insert

35034

Straight w/ metal insert

3127

IMPROVED

3201

The 'I' pad cushions only the

climber's shank with a mini-

mum of additional weight.All leather construction with

3/4" padding.

3120

Rivet-less pad with the

built in tunnel design. A

soft leather is used againstthe leg. All leather con-struction with 3/4" padding.

3122

A quality leather padwith 3 loops and a tunnel

design to keep climberstationary. All leather

construction with 3/4"padding.

3125

The 'L' Tunnel pad

has a soft 3/4" cushionsandwiched between

two pieces of leather.All leather construction

with 3/4" padding.

3 loops and a tunneldesign to keep climber

stationary.

3124

The 'T' pad has a thick feltliner and a tunnel design to

stabilize the climber shank.

All leather construction with3/4" padding.

The 3127 provides increased sup-

port and helps to reduce leg irrita-

tion. The 8” wide pad secures theclimber to the leg with dual straps

and the thick felt ller prevents irrita-

tion from the climber shank rubbing

the calf muscle.

3126

The most comfortable ‘L’ pad on the

market. The closed cell foam ller

prevents the climber shank from

irritating the user’s leg. The rolled

edges prevents chang the calf

muscle. A little heavier pad but it

provides maximum comfort.

•Rounded edges - no sharp corners

to chafe leg

• Closed cell foam ller

• Tunnel design to hold shank

• Requires a 26” strap

• Requires two 26” straps

• Felt lined

• Tunnel design to keep

climber shank rigid

• Heavy leather construction

• Dual strap design provides

superior support

The ‘C’ pad is designed with

a metal insert and oversized

felt liner for additional

comfort. The liner edge

minimizes chang on the

leg and the metal insert

prevents the climber

shank on the calf, reducing

irritation.

• Requires a 26” strap

• Heavy leather construction

• Felt lined

For the straight insert order 35034

For the angled insert order 35032KL or 35034KL

To order replacement steel inserts order Model 5032 for

angled and 5032S for straight

For Klein order 5032KL for angled and 5032SKL for straight



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


CLIMBER ACCESSORIESComfort and safety are features Buckingham strives to provide our customers.

35033

The climber footplate attaches easily to any steel or titanium climber. Two plate con-

struction fastened together with two screws. Simply screw the two plates together withthe rubber sole down. Standing on the pole was never so comfortable. Instructionspacked with footplate. To order replacement screws use part #14.Not for use with aluminum climbers.

3128

Shank pad - If the climber

shank irritates your ankletry the benet of a pad

designed to cushion this

tender area. A cushion be-tween the climber and your

ankle prevents the irritation.

10

The Climber Shield - A light

weight shield that is ideal forapprentices. Helps prevent

gaff puncture wounds when

learning to climb.

Shield attaches easily with

one screw to the climbershank. Slot in shield allowsfor climber foot strap.

OSHA requires gaff guards when climber is not in use.

6909 - Only for

Buckingham permanent

gaff climbers. 6909U - A coated wireuniversal pole gaff guard

that ts all pole climbers:Buckingham, Bashlin, Klein

and Stringer Brooks.6909A Snap onGaff Guard ts

all Buckingham

replaceable polegaffs with a 16°

angle (A style).

60091 - Leather GaffGuard with Velcro

Fasteners60091 - Tree60092 - Pole

Fits all climbers.

6009 - Leather GaffGuard with a buckle

fastener. Fits all

climbers.

60093 -Leather Gaff

Guard with

Bungee strapthat attaches

to the sleeve

loop. Fits allclimbers.

60094 - Leather Gaff Guardworks with all manufactur-

ers replaceable or perma-

nent pole gaff climbers.Velcro closures and

reinforced steel rivets

to prevent gaff tipfrom protruding.

NEW




Inspect for:

• cuts, nicks or cracks

• elongated holes

• rotted leather

• faulty buckle

CLIMBER STRAPSClimber straps should be inspected daily.

DESCRIPTIONS

Two piece strap is permanently

attached to stirrup ring.

One piece strap weaves

through the stirrup loop.

Two Piece Foot Straps with Split Rings (sold in pairs)

1" (25mm) 1 1/4" (32mm) 1" (25mm) 1 1/4" (32mm)

LATIGO LATIGO NYLON NYLON LEATHER LEATHER

26" (66cm) assembled 21391 213591 21341 2135126" (66cm) unassembled 2139 21359 2134 2135

Single Piece Straps (sold in pairs)

1" (25mm) 1 1/4" (32mm) 1" (25mm) 1 1/4" (32mm)

LATIGO LATIGO NYLON NYLON LEATHER LEATHER

One Piece 22" (56cm) 2239 22359 2234 2235One Piece 24" (61cm) 2439 24399 2434 2445One Piece 24" (61cm) with Buckle Pad 2449 24359 2444 2435

One Piece 26" (66cm) 2639 26399 2634 2635One Piece 26" (66cm) with Buckle Pad 2649 26359 2644 2645

One Piece 28" (71cm) 2839 28399 28344 28354One Piece 28" (71cm) with Buckle Pad 2849 28359 2844 28454

One Piece 30" (76cm) - 30399 263432 -One Piece 30" (76cm) with Buckle Pad 3049 26309 - -



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


MISCELLANEOUS CLIMBER ACCESSORIES

Sleeve Fasteners - There are two replacement sleeve fasteners; one uses a 10/32threaded sem, product number 996 and the second uses a barrel fastener and screw,

product number 9215. Examine the hole in your climbers to see if they are threaded or

smooth. Use model 996 if threaded and, if smooth, use product number 9215.

9204 - Chrome colored short sleeves adjust from 16 1/4" to

18 3/4" for standard length climbers. Narrow stirrup climbersadjust from 14 1/2" to 17 1/4".

9202 - Chrome colored long sleeves adjust from 19 1/4" to

21 3/4" for standard length climbers. Narrow stirrup climbersadjust from 17 1/4" to 20 1/4".

Sleeve Fasteners

996

Sleeves9204

9202

Multi-Gaff Gauge Holder for the crew foreman or safe-ty director who has to check more than one manufac-

turers' climbers. Order gauges separately.

6027 Holder

Complete illustrated instructions

are provided in a protective covering.

They show each step in the shaping operation.

Each tool may be purchased separately.

6025 Pole Gaff Maintenance Kit

6025C CCA Pole Gaff Maintenance Kit

Correctly shaped gaffsare essential for climbing.

The Buckingham gaugeis your guide to proper

shaping. It is compact,uncomplicated, revealing

and indispensable. Yourgauge should be a busytool. It denes your work,

checks your progress andjudges your results.

In 30 seconds time the gauge will survey the conditionof your climbers and indicate what is wrong, where it is

wrong, and what needs to be done.

6303 Pole Gaff Shaping Gauge6303C CCA Pole Gaff Shaping Gauge

6306 Tree Gaff Shaping Gauge

Gaff Gauges with InstructionsGaff Maintenance Kit

Kit includes:6058 smooth, single cut le6303 pole gaff gauge (6303C for CCA Gaff)

6501 nishing hone

9215

Split Ring9218

Split rings are

sold in pairs.



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425

www.buckinghammfg.com 28

NOTES


http://slidepdf.com/reader/full/buck-2010-catalog 29/92Courtesy of C.O.R.




Saddles and Belts

We have been designing new saddles and belts, and improving existing ones, since the turn of the century.

Most new ideas are the result of talking to our customers.

All saddles manufactured by Buckingham are made from the nest quality components. They are tested to meet our

standards, which meet or exceed OSHA, ANSI (A10.14 Type II) and all other regulations. Some saddles are CE marked.

We have the widest selection of saddle designs in the industry with models ranging from deluxe to economy. All feature the

same quailty, but vary relative to the comfort features and weight.

Saddle Options

• Number of “D” rings: 3 or 4

• Width of back support: 3” (76mm) to 8” (205mm) wide (padded or not padded)

• Seat sections: individual leg straps, butt straps with leg straps, or batten seat for the most comfort and support

We offer two types of “D” rings: one made to stop at 45 for ease of snap engagement with one hand and another

without the stop clip so the dee ring can rotate 180 .

Waist straps are made from woven nylon with grommets, woven nylon used in conjunction with a friction buckle or

6-ply neoprene impregneted nylon (Nybuck).

Fit is important to comfort. Be sure to allow for wear over heavy clothing.

Typically Fit for A Person With Waist SizeX-Small 24-28

Small 28-32

Medium 32-36

Large 36-40

X-Large 40-44

Although, Buckingham can provide you with the highest quailty equipment available, safety is still your

responsibilty. Part of that responsibility is checking belts and saddles before each use for:

• Cracks, nicks, distortion, or corrosion of hardware • Loose stitching, broken threads or burns

• Loose or worn rivets • Loose grommets or elongated holes on waist strap

• Worn material • Accessory snaps and rings that are not working

• Destroy any or all equipment subjected to impact loading properly

If any of these conditions exist, discontinue use of product, destroy and replace with new equipment.

Guidelines for Use of Saddles and Belts

• Know and follow ANSI Z-133.1 regulations.

• Use these products for positioning and suspension only

• The use of fall arrest equipment is highly recommended in addition to the use of saddles and belts

• Only attach connecting devices meeting work positioning and suspension standards and regulations to

saddle/belt dee rings/attachment points.

• Only work positioning connecting devices should be attached to side dee rings. Side dee rings are not

intended for fall arrest.

• Saddle/belt dee rings and attachment points are designed for work positioning and suspension use only.

Never attach a chainsaw or rigging line to a saddle/belt dee ring or attachment point.

• Positioning and suspension anchor points must support your weight plus any job related load.

• Maximum load capacity for accessory hooks and rings is 25 pounds (11.3 kilograms).

• Arborists shall be tied in or secured while ascending the tree and remain tied in or secured until the work is

completed and they have returned to the ground.

• Arborists shall use a second point of attachment (work positioning lanyard or double-crotched rope) when

operating a chain saw in a tree.

Suspension

All Saddles

Work Positioning

All Saddles



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


A

B

M

K

L

N

O

DP

J

H

I

F

GE

C

U

T

R

S

Q

FEATURED DESCRIPTIONS

ERGOVATION®

A Ergonomic back pad with customizable lumbar

support

B Abdominal stabilization system

C Enhanced close cell foam padding along pelvic

rim

D Ergonomically designed leg pads

E Load distributing polymers along pelvic region

below work positioning “D” ring area

F Aluminum Work Positioning “D” rings for in-

creased comfort and decreased weight

G Articulating suspension point

H Load distributing tie in point with multiple tie in

options and adjustable bridge

I Aluminum quick connect waist buckle

J Aluminum quick connect leg strap buckle

K 3:1 waist adjustment friction buckle

L 1 3/4” Elastic webbing keepers

M Adjustable suspension point for customizable

balance

N Interchangeable lower suspension assembly

O Velcro attached load bearing webbing

P Snap webbing keepers

Q 6 Gear loops

R Leg strap retainer adjustment buckle S Carabiner attachment loop for chainsaw or retro

harness attachment

T Rear attachment buckle for retro harness attach-

ment

U Lumbar pocket closure (labels and size inside the

ap)

Weighs 6.3 lbs.

The revolutionary design of the Ergovation® tree saddle was developed with the insight of a Doctor of

Physical Therapy, A Professional Arborist and Buckingham Manufacturing Company:

• Dr. Amanda Carpenter’s recommendations to support the human body and it’s problem areas for

Arborists - hips, back and buttocks• Ed Carpenter’s suggestions for the ideal components in a climbing saddle

• Buckingham’s knowledge needed to meld ergonomic design and arborist feature requirements into a

durable quality saddle• The Ergovation® tree saddle conforms to EN 358 1997 for Work Positioning as well as EN 813 1997

for sit harness

Model # 16906 Patent Pending




ERGOVATION® HARNESSES

The Ergovation® H-Style

Retro Harness Model REH1

(option H1)

The Ergovation® Y-Style

Retro Harness Model REH2

(option H2)

Two unique retro harnesses that accommodate climbers wanting to retro t their tree saddle. Also excellentfor climbers utilizing Single Rope Technique (SRT) to access their work vertically. By utilizing the harness the

climber is able to decrease the strain on the lower back region and disperse the weight of the saddle, as well asthe tools that the climber is using throughout the entire upper body.Common features include:• 1/4” closed cell foam padding for improved comfort

and hygiene

• Pads stitched to harness webbing to prevent shifting

and improve donning of harness

• Aluminum D-ring for decreased weight

• Y2 Friction Buckles for quick secure adjustment of

webbing in front and back

Model REH2 unique features:• A one of a kind snap retention system to secure

chest ascender to Y-Style Retro Harness.• The only retro-harness on the market that accom-modates both sternal and dorsal fall arrest, as well

as a chest ascender attachment for SRT access.

Model REH1 unique features:

• Velcro chest retention strap for quick and easydonning of harness

• Plastic quick connect buckles to anchor andkeep chest ascender vertical and in tension while

ascending.• Dorsal fall arrest attachment

FULLY ASSEMBLED ERGOVATION® TREE SADDLES


Ergovation® Tree Saddle

[see page 27 for features]

169062 - All the benets of the

original Ergovation® Tree Saddle

with a bridge and 2 sliding dees.


Ergovation® Tree Saddle with an

SRT bridge. Ideal for a Single

Rope Technique climbing systemwith an add-on harness.

NEWNEW



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


BUILD YOUR OWN ERGOVATION® TREE SADDLE

ERGOVATION® TREE SADDLE ACCESSORIES - SOLD SEPARATELY

TREE SADDLE MATRIX*To order a tree saddle [also called a sit harness] to meet your specic needs, use the following procedure.

Simply insert the digit noted to congure the sit harness you desire (note: sit harness always starts with a 16906)

BASE TREE SADDLE

x

16906

BRIDGE ATTACHMENT

1 = 4 Dee Fixed P/N

2 = Sliding Dee P/N

3 - Multi Loop P/N

4 - SRT Only Bridge

8 = Sliding Ring on Web P/N

9 = Sliding Ring on Rope P/N

OPTIONSB = Batten Seat P/N 1368

H1= ‘H’ Style Retro Harness

H2 = ‘Y’ Style Retro harness[includes SRT]

P1 = Rigid Leg Pads

P2 = Semi Rigid Leg Pads

S1 = SRT Attachment

ERGOVATION® BRIDGE OPTIONS - CAN BE PURCHASED SEPARATELY

1368

Batten Seat

(option B)

WES1 - SRT (option S1)

[old style SRT can be ordered with P/N WES]

WE9 - Sliding Ring Rope

Bridge (option 9)

WE8 - Sliding Ring Web

Bridge (option 8)

WE2 - Sliding Dees Bridge

(option 2)

WE3 - Multi Loop Bridge

(option 3)

WE1 - 4 Dee Fixed Bridge

(option 1)

WES1 - SRT Bridge [Single Rope

Technique] (option S1)

NEW

NEW

P1 - Rigid Leg Pads (option P1): leg

pads thatfeature apreformed

rigid -berglass support to dramatically

decrease pressure to the leg’s whileworking aloft for long durations. De-

creases pressure to the legs, espe-cially in the femoral region.

P2 - Semi Rigid Leg Pads (option P2):increasedsupport for

users who

spend extend-ed amount oftime in sus-

pension. Decreases pressure to the legs,especially in the femoral region.

1300010G

Pack of 8 Gear Loops & 4 Elastic Retainers




Model 13655 - Four dee ring saddle with grommet beltstrap and without leg straps. Model 13665 - Four dee ring saddle with grommet beltstrap and 1" nylon leg straps.

Lightweight Saddles with Grommet WaistOur lightweight, nylon-backed economy saddles have all the features of our standard weight saddles except that they are not

lined. Therefore, you sacrice wear resistance and slightly reduce weight. Buckingham lightweight saddles are made fromnylon tensile-tested to 9,500 pounds (4309 Kg). The pad liner is made of soft 3" (76 mm) wide nylon.

Model 1337 - without leg straps Model 1339 - with leg straps.

Lightweight Saddles with Extra Back Support & Grommet WaistThis saddle design is comfortable and lightweight. An 8" wide rigid back pad provides superior comfort. A raised cush-ion ller offers maximum comfort for the lower back. This saddle features a grommet belt strap and an accessory ring

and snap to suspend equipment.

ECONOMY SADDLESBuckingham recently improved our popular 1371 and 1380 4 Dee Tree Saddles. Improve-

ments add comfort and functionality and include:

• Five accessory loops to stow gear while working aloft.

• Piggy backed snap and ring assembly to keep tools accessible.• Four small dee rings to attach suspenders.• Supple coated webbing leg straps to prevent irritation to the legs.

IMPROVED

LIGHTWEIGHT SADDLES

Model 1371 - Saddle with Wide Padded Leather Lined

Back. Provide superior comfort and support from the 5 1/2”

wide back support constructed with rubberized belting ma-

terial, 1/4” thick foam, and lined with soft top grain leather.The seat section consists of 3” wide cotton webbing rein-

forced with 1 3/4” nylon and lined with soft top grain leather.

Model 1380 - 4 Dee Single Thick Cotton Back Saddle. Light-weight in design and economical without sacricing quality.

constructed with 3” single thick cotton webbing, reinforced with1 3/4” nylon on the back and seat sections.



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


Model 1349 - with oating dee ring for suspension

(Model 13491 - 1349 with 2 oating dee rings)

Model 13494 - with 2 stationary dee rings for suspension

Lightweight Saddles with Wide Back and Neoprene Nylon Waist StrapA lightweight version of our popular Model 1340 saddle. An 8" wide rigid back pad provides plenty of support. The combina-tion of padded individual leg straps and a oating dee ring offers the climber superior freedom of movement.

LIGHTWEIGHT SADDLES

Model 1381 without leg straps Model 1383 with 1 3/4” grommeted leg straps

4 Dee Double Thick Cotton Back SaddlesThese saddles are comfortable and lightweight. The back and seat sections are constructed of 3" double thick cotton web-

bing, reinforced with 1 3/4" nylon for added strength. Combined with a 1 3/4" steel ring and accessory snap on each side,they are a practical choice among arborists. Model 1375 with 1" neoprene leg straps; Model 1376 without leg straps.

Model 1376 - without leg straps Model 1375 - with 1" neoprene nylon leg straps

Floating Dee Double Thick Cotton Back SaddleThis saddle combines the features of our oating dee ring

saddles with our lightweight design. Double thick cottonwebbing reinforced with 1 3/4" nylon make up the back and

seat sections. Soft top grain leather line the 1 3/4" grommetedleg straps keeping the saddle in place. A 1 3/4" steel ring and

accessory snap on each side keeps equipment accessible.

Model 1379 has a oating dee ring and 1

3/4” grommeted leg straps

4 Dee Single Thick Cotton Back SaddlesSaddles that are lightweight in design and economical without sacricing quality. These 4 dee ring saddles are constructed

with 3" single thick cotton webbing, reinforced with 1 3/4" nylon on the back and seat sections. An accessory snap on the

right side, and 1 3/4" steel ring on the left side helps keep equipment accessible.




Wide Leather Lined Padded Back SaddleBuckingham's line of padded wide back saddles providesuperior comfort and support. The back support is 5 1/2"

wide and constructed with rubberized belting material, 1/4"

thick foam, and lined with soft top grain leather for longerlife. The seat section consists of 3" wide cotton webbing

reinforced with 1 3/4" nylon and lined with soft top grainleather. Each saddle comes standard with a 1 3/4" steel ring

and accessory snap on each side to suspend equipment.

Heavy Duty Modular SaddlesOur heavy duty saddles are designed for professionals who climb often and who need the safest and most comfortable

equipment available. Leather back supports are a full 5 1/2" (140 mm) wide with a thick cushion for added back support. Alldeluxe saddles have interchangeable seat sections for different applications of tree work. Dee rings are attached by metal

clips which prevent the dee rings from exceeding a 45° swing which facilitates ease of snap attachment with one hand.

Model 1350 - This saddle has two stationary dee ringsfor overhead suspension and 1 1/4" nylon leg straps to

keep saddle in place. An accessory snap and ring oneach side are used to suspend equipment.

All Heavy Duty Saddles Have Interchangeable Seat Sections

Model 1340 - Floating dee ring saddle with individualpadded leg straps. Extra thick padding in the back

support and leg straps provides comfort. The oatingdee ring offers the user superior freedom of move-

ment when in the tree. Also available with two oatingdee rings. See

below for ordering information.

Model 1342 - main section

Model 1341 - seat section

Model 13401 - 1340 with 2 oating dee rings

Model 130014R - replacement ringModel 130014S - replacement snap

Floating Dee Padded Wide Back Saddles

Buckingham's line of oating dee ring saddles offerthe samesuperior construction as the 4 dee ring padded wideback saddles. The oating dee ring offers the climberadditional maneuverability when working in the tree.Soft top grain leather line the 1 3/4" grommeted legstraps to keep the saddle comfortably in position. A 13/4" steel ring and accessory snap on each side keepsequipment accessible. Model 1373 with 1 3/4" grommeted leg straps

Model 1372 without leg straps

SADDLES



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


Floating Dee Padded Wide Back Saddles

with Individual Padded Leg StrapsThe combination of dual oating dee rings and individualpadded leg straps offer the climber superior freedom ofmovement and comfort. It is constructed with a 5 1/2" widepadded back support. Also available with a single oatingdee ring. This saddle is ideal for using the dual anchoragepoint split tail system for added stability when limb walkingand overhead suspension. Model 1378 available with 1oating dee ring & individual padded leg straps.

Model 1377 with two oating dee rings

Black Widow Saddle

Model # 15908

SADDLES

Buckingham presents the new ArborMaster® Saddle Series emphasizing safety, versatility and comfort for Professional

Arborists. Both experience and customer feedback have guided Buckingham and ArborMaster® in the development andmanufacturing of our newest generation of Arborist Saddles that include both the Deluxe and Classic Series Master, Pinnacle

Traverse and Versatile Saddles.

ARBORMASTER® CLASSIC SADDLE SERIES

Classic Master Saddle Model 1290• Upgraded from the Master II (ArborMaster® Collection)

• Suspension system features a medium dee ringand six connection loops

• Step in waist belt and two side mounted friction buckles• Individual leg straps with interlock buckles

ARBORMASTER® CLASSIC SADDLE SERIES• One accessory rings for First Aid and two accessory loops

• 7" Tuff Duck covered Back Support with one layer for rigidity

• New Y2 friction buckles; easy to adjust and positive locking• Forged medium dee rings to accommodate all types of users

• Multiple adjustments for ideal center of gravity

• Two rugged and versatile handsaw snaps

• Interlock leg strap buckles

• Suspender connection loop• Heavy duty elastic extensions for leg pads or batten

• Medium size dee rings (5000 lbs.)

P O P U L AR C H O I C E

Classic Pinnacle Saddle Model 1291T• Upgraded from the Pinnacle (ArborMaster® Collection)

• Tongue buckle waist closure (available withfriction buckle waist; drop 'T' sufx to order)

• Batten seat designP O P U L AR

C H O I C E

Comfort Features:• Lightweight arborist saddle weighing in at 3 lbs. 14 oz.

• Soft cushioned back pad

• Wide leg straps sewn in a xed position to keep the leg

straps in place• Offset patented quick connect waist strap buckle to reducemidsection interference when bending

• Two loops and rings to hold accessories when working aloft

• Heavy duty suspension bridge for maximum lateralmovement made from three layers of Spectra web




Classic Versatile Saddle Model 1293

• Friction buckle waist closure (available with tongue

buckle waist; add 'T' sufx)• Five loops for overhead suspension for various

climbing situations• Upgraded from the Versatile (ArborMaster® Col-

lection)• Batten seat design

• Only 3 lbs. 9 oz.; 1 lb. 7 oz. lighter than the original

Glide.• Suspension bridge with aluminum ‘O’ ring for im-

proved lateral movement.• Lighter back pad with wider webbing that disperses

support across the entire pad.• Aluminum quick connect buckles for waist strap

closure and leg strap buckles.

• Improved leg pad with added support & improvedmaneuverability.

• Accessory ring and snap and three accessoryloops.

• Two accessory rings for storage and blood stopperpouches.

• Medium size dee rings satisfy both Arborists partial

to large dee rings and those preferring small deerings.

BUCKINGHAM presents the new ARBORMASTER® GLIDE LITE saddle with the same emphasis on safety, versatility andcomfort as all our Professional Arborist Saddles and with the added benet of reduced weight.

*Order 16902W2 for aSpectra Web bridge piece

P O P U L AR C H O I C E

ARBORMASTER® Glide Lite Model 16903W1

• Redesigned ring assembly and leg straps foradded durability & better weight distribution

• Warp Speed rope suspension bridge with rubber

grommets to protect whipping & core fromexcessive wear

• Accessory rings for storage or blood stopperpouches

• Modular design allows for the replacement ofworn pads

• Accessory snap on the right & mini carabiner on

the left• Drilex® liners to wick moisture away from the body

• Quick Connect Buckles on the waist & leg straps• Three easy to use gear loops

ARBORMASTER® CLASSIC SADDLE SERIES

ARBORMASTER® GLIDES

Glide II Saddle Model 16902W1*

Classic Traverse Saddle Model 1292


buckle waist; add 'T' sufx)• Two sliding suspension dee rings for enhanced

torso movement• Upgraded from the Traverse (ArborMaster® Col-

lection)• Batten seat design



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


Medium DeeRing

ARBORMASTER® DELUXE SADDLE SERIES

• Add on full body harness feature - man rated leg extensions

• 5" Drilex lined Back Support has two layers: one for rigidity

and one for comfort

• Two upper and ve lower accessory rings for storage & bloodstopper pouches and three accessory loops

• New Y2 friction buckles; easy to adjust and positive locking

• Rugged and versatile handsaw snaps

• Quick Connect Buckle leg straps• Medium size dee rings (5000 lbs.)

• More tie in connection points

Drilex liner on Deluxe back pad wicks moistureaway from the body.

Quick Connect

Buckle

Y2 Friction

Buckle

Deluxe Master Saddle Model 11290• Upgraded from the Master III (Pro Series)

• Step in waist belt & two side mounted Y2 friction buckles

• Available with tongue buckle waist; add 'T' sufx• Eight loops for overhead suspension

• Standard: cushioned individual leg straps• Available with cushioned batten seat [Model 12290]

ARBORMASTER® DELUXE SADDLE SERIES

Deluxe Versatile Saddle Model 11293• Upgraded from the Versatile (Pro Series)


buckle waist; add 'T' sufx)• Five loops for overhead suspension

• Standard: cushioned batten seat• Available with cushioned individual leg straps [Model

12293]

Deluxe Traverse Saddle Model 11292• Upgraded from the Traverse (Pro Series)• Friction buckle waist closure (available with tongue

buckle waist; add 'T' sufx)

• Two sliding dee ring suspension for enhanced torsomovement

• Medium size dee rings (5000 lbs.)• Standard: cushioned batten seat

• Available with cushioned individual leg straps[Model 12292]

Deluxe Pinnacle Saddle Model 11291T• Upgraded from the Pinnacle (Pro Series)

• Connection loops inside suspension straps provide

additional tie in points• Standard: cushioned batten seat

• Available with cushioned individual leg straps [Model12291]

• Tongue buckle waist closure (available with friction

buckle waist drop 'T' sufx to order)



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


Carabiners sold separately

Model R03X6G9 ‘Y’ Style Retro Harness Model R396G9 ‘H’ Style Retro Harness

R3=Velcro Chest Strap 4=Interlocking Buckle

8C=Quick Connect Buckle9 6G=Steel Dee Ring

7=Web Loop9=Yoke pad

*Can be used on Arborlite saddles manufactured after 8/1/06.

Model 1299 Add-On Back

Saver PadAdd-on tree saddle pad upgrades any saddle with a 3" wideback pad to a full 5 1/2" of cushioned back support. Leather

lined and lled with 1/4" thick foam to create a rm and comfort-able back support. Attaches with four Velcro straps. Order small,

medium, large, or x-large to match the size of your saddle.

U6261 Retrofit SuspendersThe weight of equipment can pull down on a climber's saddle causing dis-comfort and inconvenience. The easy to attach retrot suspenders comfort-

ably distributes weight throughout the shoulders and stops the saddle fromsliding down. The elastic design provides freedom of movement while climb-

ing and working. One size ts most. NOT MAN RATED!

Model 20 shown with 5555WSA

(Carabiner not included).

Model 20 shown

on Model 1393T

Versatile saddle.

Model 342

Model 341

Model 341 - Add-on accessory snap

attaches to belt snap of deluxe and lightweight climbingsaddles. Available with a 1 1/8" steel ring Model 342.

DELUXE SERIES RETRO HARNESSES

SADDLE ACCESSORIES

Harness Style Lead Digit Chest Strap Attachment Harness Type Fall Arrest Attachment Shoulder Pads

*Y Style; 1 to 1; (2 carabiners

required. Onlyoperable as full bodyharness w/ Deluxe

Master Saddle)

R 0 3X=Mediumdee ring

6G=Steel Dee Ring 7=Web Loop

9=Yoke pad

H Style; 2 to 1 (1 carabiner

required)

Model U6261 Retrot Suspenders Model 6261-X

Adds 4" of adjustment [NOT MAN RATED]Model 20 High Density Roller

The High Density Roller is designed to be used witheither the 1293 or 11293 Versatile saddle. It greatly

reduces wear and tear on the suspension strap while

providing the climber with easy and consistent side toside movement.

Constructed of Ultra High Molecular Weight polyethyl-ene. Works best if used with Model 5555WSA carabi-

ner shown on Carabiner Page.



Courtesy of ArborMaster® Training




As is true with all personal protective equipment, connecting devices should be used only bytrained professionals. Each time a connecting device is used, it should be inspected for suchthings as:

• cracks, nicks, distortion or corrosion in hardware

• loose stitching, broken threads or burns

• loose or improperly-peened rivets

• improperly-operating (locking & standard) keepers

• worn material

If a connecting device is subjected to a fall, remove it from service.

Each Time Equipment Is Used It Should Be Inspected

OUR CONNECTING DEVICES

Things to Remember When Using a Connecting Device

• Know and follow ANSI Z133.1 regulations.

• Always use a locking rope snap hook or self closing positive locking carabiner.• Never rely on the sound of the snap hook connecting with the “D” ring. Always visually

inspect the connection, even after taking pressure off ring and snap hook.

• Never defeat the locking mechanism.

• Never connect snap hooks together.

• Never expose a rope or web lanyard to a sharp object.

• Never use a deceleration device for work positioning.

• Never let a rope or web lanyard come into contact with extreme heat.

• Never attach a web lanyard back onto itself or attach multiple lanyards together.

• Destroy any and all equipment subjected to impact loading.

If you do not receive the use and care literature with your personal protective equipment,please contact your Buckingham distributor or contact us directly.

In This Section

• Throw Bags, Throw Lines and the Big Shot to Assist Getting Throw Line intothe Tree

• Friction Savers and Buck Blocks

• Single Eye and Eye to Eye Tails

• Positioning Straps - Fliplines and Accessories



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


Throwbags, Slickline, and Big Shot

Slickline Only17 – 100 100' 1/8" Slicklin

17 – 150 150' 1/8" Slicklin17 – 200 200' 1/8" Slicklin

17 – 250 250' 1/8" Slicklin

17C 1000' Coil Slicklin

(E.g.: 16-160-150: 16 oz. oran

throw bag packaged with 150yellow slickline. Teardrop desig

is for use with the Big Shot. Ad

'A1' to the part number[e.g. 16A1-16O].)

Since the introduction of throw bags and slickline, climbers have been able to achievehigher placements of climbing line over desired limbs from the ground. With a little

practice, the throw bag can be tossed into a tree with accuracy up to 75'. Throw bagsare available in weights ranging from 12 oz.-20 oz., in a wide variety of colors and

materials including TNX (vinyl coated), Tuff Duck, Magna Tuff, Cordura and leather.

Sold separately or packaged with 1/8" slickline. See below for ordering information.Buckingham Throwbags have a tighter, more aerodynamic design. All seams are

reinforced with two rows of stitching, and the steel ring is fastened with five rowsof stitching for added durability.

The Big Shot

The Big Shot is designed to launch a shot pouch (8 to 16 oz.) with a light line

attached over a tree limb so a friction saver or climbing line can be pulled intoplace with little practice. A vertical distance of over 100’ is easily achieved with

great accuracy. The Big Shot head is designed to t quick connect berglass

poles to set up in seconds. The Big Shot is a must for every arborist.Not For Use With Wooden Poles

Model 1027 Big Shot with two 4’ Fiberglass Extension Poles

Model 1027H Big Shot Head Only for Jameson Poles

Model 1027S Big Shot Pouch & Sling Only

Model 1028H Big Shot Head Only for Seymour Smith Poles

Clockwise from lower right: 16-16O,

16-14G, 16-10Y, 16A1-16G, 16A1-

16O

Throw Line Techniques

The line can be passed backthrough the steel ring creating

two nger holds. It is thenswung back and forth between

the legs and tossed into thetree. Both techniques achieve

great distance and accuracy.

The onehand method

OR

The user can tie a slippery half hitchin line, waist high. This gives him a

good nger hold.

The two hand method

Zing-It Throwline that's strong,

low stretch and abrasion resistant.The special coating reduces abra-

sion allowing Zing-It to glide easilyover the roughest bark. Designed

to be used with an 8 oz. or 10 oz.throwing bag.

Model 17Z1 — * 1.75 mm Zing-It

Model 17Z2 — * 2.2 mm Zing-It

*Indicate desired length

Bag Teardrop Weight Color Option Line

16 A1 8 oz. O-Orange D-throw 100' 10 oz. G-Green bag 150' 12 oz. P-Hot Pink coated in 200' 14 oz. B-Blue yellow 250' 16 oz. R-Red rubber 20 oz. L-Leather tool Dip B5-Blue TNX

B3-Black TNX G2-Green TNX O1-Orange TNX R3-Red TNX Y-Yellow TNX

Teardropdesign isideal forthe Big

Shot.

The bullet design is ideal for the handtoss method.

Big Shot

Model 1027




BENEFITS INCLUDE:• Install and Retrieve from the Ground• Less Bend Radius

• Less Friction - Easier to Climb

• Reduced Wear to Rope• Can Be Used as False Crotch

• Rated to 5,000 lbs. - For Human Support Only• Available in Steel and Hardcoat Anodized Aluminum

STEEL ANODIZED ALUMINUM

57S-24 2' overall length steel 57-24 2' overall length aluminum





ARBORMASTER® FRICTION SAVERS (PATENTED)

Model 57-48; 4' overall length aluminum

Friction saver showninstalled in tree.

Installation of Friction Saver or BuckBlocks• Place throw bag over a solid branch with throw line.

• With two legs of throw line hanging over the branch, tie throw bag on the outside of the small ring or red block (with

throw ball) and insert the other end of the throw line through the large ring or black block.• Pull the end of the throw line with the large ring or the black block so the bag pulls the small ring or red block up rst

with the large ring or black block trailing on the throw line (see Illustration 1).• Just prior to the small ring reaching the branch, give a quick tug pulling the small ring or red block over the branch

and letting the throw bag to drop to the ground (see Illustration 2). The Friction Saver/BuckBlock is now over thebranch and the throw line is going through the rings/blocks. Tie the climbing line onto one end of the throw line and

pull through the rings or blocks.

ILLUSTRATION 1

Pull on throw bag to raisefriction saver into tree.

ILLUSTRATION 2

When friction saver is justbelow limb, quickly ip it upand over limb, so it does notget hung up.

BuckBlocks Climbing System Model 5006S (Patent Pending)

BuckBlocks are ‘Buck Tough’ and makeascending and descending easier with

running sheaves and better rope bendradius.Benefits Include:

• Rotating Sheaves - No Friction• Less Bend Radius to Rope

• Installed and Retrieved from the Ground• Blocks Are Color Coded

• Accommodates up to 1/2”” Climbing Line

• Used As False Crotch

N E W F R

O M

B U C K I N

G H A M !



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


1/2" 3 Strand Nylon Rope Fixed Length w/1706 Locking

Snap Hooks on Both EndsModel Length

7VV212 2 feet (.6m) — For Fall Restraint7VV214 4 feet (1.2m)

7VV216 6 feet (1.8m)

7VV216

1/2" 3 Strand Nylon Rope Adjustable Length w/1706

Locking Snap Hooks on Both EndsModel Length

7VV226 6 feet (1.8m)

7VV227 7 feet (2.1m)7VV326 6 feet (1.8m)

7VV526 6 feet (1.8m)

Adjustable Length w/1706 Locking Rope Snap Hooks on

Both Ends

Model Length7VV124 4 feet (1.2m)

7VV126 6 feet (1.8m)

Rope and Web Lanyards for Work Positioning (Fliplines)

7VV226 P O P U L AR C H O I C E

Buckingham Manufacturing offers a complete selection of work positioning lanyards.

7VV126

9V08K16M4

Adjustable 16 Strand Stitched Polyester Fliplines

9V08K16M4 (stitched rope; 6' length; XTC green with red core; LAD)The adjustable iplines from Buckingham makes climbing with safety lan-yards safer and easier. The addition of the LAD (Length Adjusting Device)

gives the user the ability to easily adjust the length of the lanyard with onehand. With the LAD at the user's side, (where it's needed) no longer will

the user have to hug the tree to adjust his lanyard. The stitched eye allows

the red core to be left in the rope alerting the user to excess wear or cuts.Fliplines are also available in custom lengths of 1/2" Bluestreak, Safety Blue, High Vee and XTC Spearmint. Last two

numeric digits designate lanyard length. See below for ordering information:

Model 9V08B110M4 (stitched rope; 10’ length; High Vee; LAD)

Model 9V08C112M4 (stitched rope; 12’ length; Safety Blue; LAD)

Model 9V08D114M4 (stitched rope; 14’ length; XTC Spearmint; LAD)

Work Positioning Lanyards with the LAD (Length Adjusting Device)The BuckGrab Model 5004B Is the Revolutionary New LAD (Length Adjusting Device)

from Buckingham that incorporates a 90° twist in the eye of the CAM eliminating the need for a locking twisted cleavis. TheBuckGrab has a secure closure provided by a nylock nut tted with a split ring as an added precaution.

The BuckGrab is ideal for work positioning applications on 1/2” rope.

For a vertical lifeline application, an energy absorber must be used.

Still Made in the USA The Original

‘Twisted CAM’ Design

Model 5004BFor use with 1/2" diameter non-

metallic rope only. (Add sufx"M4" to model number)




STITCHED EYE TO EYE TAILS

Model P7J8A-10-26 - 26”

Eye to Eye 16 strand 1/2” bluestreak hip prusik with a ball

lock aluminum carabiner (soldseparately)

Model P7J8A-V-26 - 26”

Eye to eye 16 strand 1/2”

blue streak hip prusik with1706 locking rope snap

Model P7J6-10-24 -24” eye to eye 12 strand

3/8” coated tenex hip

prusik with a ball lockcarabiner (sold separately)

Model P7J2-10-33 - 33”

eye to eye 1/2” 3 strand nylon

with a ball lock aluminumcarabiner (sold separately)

The Bee-Line 3/8” (10mm) eye to eye stitched tail allows the user to cre-

ate a closed friction hitch such as the Schwabisch prusik or the Distel.There are other hitches too; all require the user to practice tying and use

prior to working at heights. The two inch stitched pattern creating theeyes are covered with heat shrink tubing for longer wear. The stitched

eyes are tested to meet a minimum 5,000 lbs. tensile pull.

N E W F R O

M

B U C K I N G

HA M !

Model P9J8P-10-30

Model 38STBThe Split Tail Climbing System is quickly gaining popularity among

climbers. Buckingham's split tails are 4' in length (special lengths

available upon request) and made with 16 Strand, 1/2" rope. Awhipped end and eye provide maximum safety. Advantages of thesplit tail system over a traditional climbing systems are:

• Contrasting color of split tail makes it easy to differentiate from

climbing line.• Eliminates need to cut worn pieces from climbing line (simply

replace worn split tail).• Can be used for a dual anchorage point system for added stability

when limb walking.

• Available in ve different colors and custom lengths.

Model 39ST8P 4’ Bee Line Split Tail

Model 38STY 4' Goldstreak Split Tail

Model 38STB 4' Bluestreak Split Tail

Model 38STG 4' XTC Spearmint Split Tail

Model 38STO 4' Safety Blue High-Vee Split Tail Different lengths available by adding desired length to model

Model 38STW 4' Safety Blue Split Tail number (i.e. 38STB - 6 6’ Bluestreak Split Tail).

Eye And Eye Tenex Climbing Prusik Cord

This Eye and Eye Tenex Climbing Prusik Cord is designed for use with

two of the hottest new friction knots, the Schwabisch Prusik and theDistel Hitch. Both of these friction knots have excellent holding charac-

teristics on your climbing line without binding or rolling out like traditionalfriction hitches. We recommend only experienced climbers familiar with

their operating characteristics use these friction knots. Available in 34” or

40” overall length.

Model P7J6-10-34 Eye and Eye Tenex Climbing Prusik Cord

Model P7J6-10-40 Eye and Eye Tenex Climbing Prusik Cord

Schwabisch Prusik Distel Hitch

N E W F R O M

B U C K I N G

HA M ! The Bee-Line 3/8” (10mm) single eye stitched split tail offers theuser the ability to make a Blake’s or Tautline hitch onto their climb-

ing line for ascending and for maneuvering around the tree. The

two inch stitched pattern creating the eye is covered with heatshrink tubing for longer wear. The stitched eye is tested to meet

a minimum 5,000 lbs. tensile pull. IMPORTANT: all split tail knotsshall have a stopper knot and must be set before using.

STITCHED SPLIT TAILSModel 39ST8P

SPLICED EYE TO EYE TAILS

Available in 26”, Model P9J8P-10-26 & 30”, Model P9J8P-10-30

SPLICED SPLIT TAILS



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


Fliplines (Positioning Lanyards) with Prusik Adjustment

Model 7+N+N8B110 Lightweight 2 in 1 safety prusikLanyard with P7J6-+2-24 prusik[sold separately]

Two Styles of Prusik Continuous Loop Eye to Eye

Pull tight and measure inside to inside.Measure from inside of eye to inside of eye.

Prusik Measurement Based on Rope Diameter

Lanyard Rope

Diameter

1/2"5/8"

3/4"

Eye to EyePrusik

26"

28"31"

Continuous Loop

Prusik

12"14"

16"

The 2 in 1 Safety Prusik

Lanyard provides the user a

means to stay continuouslysecured to the tree when

climbing over obstructions.

Buckingham uses differ-ent color thimbles to easilydistinguish each end of the

lanyard. This eases the task

of climbing over obstruc-tions. This particular model is

10' in length. Available in anylength desired by designating the last numeric digit as the

length, i.e. 7VV2110J (10' length).

This Prusik Loop is made of 16 strand 1/2" braided bluestreak rope, which is looped around a 3-strand twist nylon

rope. The combination of braided rope and twisted rope of-fers the best combination for this application.

Model; 7VV2A110J (Carabiner not included) P O P U L AC H O I C E

Model 9VV8K110J - Lightweight adjustable ip-line. Stitched 2 in 1 lanyard with eye to eye prusik(P7J8A-10-26). Red core in rope alerts user of excesswear or cuts in rope. (Carabiner sold separately)

"Simply disconnect original legof lanyard and continue climb."

"While hitch hiking the second legof lanyard can be secured aboveobstruction and connects to saddle."

Guidelines for using Prusik Lanyards• Prusik diameter should be the same size or smaller than

the lanyard diameter.• Prusik should be a different style rope than the lanyard.

• Using like ropes is not recommended but, if like ropesare used for both the Prusik and the lanyard, 3 wraps are

required.• Prusik ideal number of wraps:

•16 strand Prusik on a 3 strand = 2 wraps

•12 strand Prusik on a 3 strand = 2 wraps •Tenex Prusik on a 3 strand = 2 wraps

•3 strand on a 16 strand = 2 wraps• The Prusik must be set before using.

Model 704A1 - Friction Saver Prusik Loop with AluminumRings

The Friction Saver Prusik Loop offers you numerous benetswhile climbing, working, and descending a tree without limbs or

limbs inaccessible by a throw bag and line.

Model 704S1 - Friction Saver Prusik Loop with Steel Rings

Prusik Lanyards Allow User to Maneuver

Over Obstructions While Continually Attached.

Adjustable Friction Saver




Model RP110 Micro Pulley

Model 251B1 Bronze Snap

Split Tail and Micro Pulley"tied in" and ready to climb.

Split Tail and Micro PulleyThe Micro Pulley is an inexpensive piece of equipment withmultiple uses and benets. Attaching a micro pulley to your climb-

ing line (shown below) eliminates the need to advance the friction

hitch while climbing. This can be done by the ground man by pull-ing slack from the line as the climber ascends. Another benet of

the micro pulley is that it maintains a fair lead between the climbingline and friction hitch. When dropping through limbs and changing

direction of the falling end of the climbing line, the friction hitch can

be very difcult or impossible to operate. The use of a micro pulleymakes it easy, even without clearing the falling end of the climbing

line over the limb you have just dropped below. Another use of themicro pulley is with the 2 in 1 Safety Prusik Lanyard (shown below) it

gives the user easy adjustability with one hand.

Split Tail shown rigged ina dual anchorage pointsystem.

Model 4958 HandLine & Tool Bucket

Swivel Snap Hook*

11/16" (17 mm) eye

4 3/8" (111 mm) long1/2" (13 mm) opening*Warning: Not intended

for human support

Fair lead to ease tensioning.

Foot Lock Prusik Cord Model 39SAM9-12 is well suited for a footlock prusik cord due to its excellent heat resistance and high stretch/

low stretch characteristics. A braided polyester cover over a braided

Technora core make up the construction of this supple cord. 5/16" (8mm) diameter Precut into 12' lengths.

Miscellaneous Connecting Devices and Aids

Model 24S-7 is a ipline connection strap developed, with Bill Conn, as aninexpensive alternative to a locking twist clevis for proper orientation of your

mechanical adjustment style microcender. Simply girth hitch to the ascender and

connect to your Dee ring using a self closing, positive locking type carabiner. Thestrap adds approximately 4” [10.2cm] to the work positioning system. The strap

can also be cut as a last resort to perform an aerial rescue if used with a wire coreipline.

WHEN USING A WIRE CORE FLIPLINE, YOU MUST HAVE THEABILITY TO CUT AN INCAPACITATED PERSON DOWN!



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


The slide buckle pole strap offers the user an easier way of adjusting the length when working on a tree or pole . The buckle

eliminates the difculty of aligning the tongue with the belt strap holes. To adjust, simply slide the desired amount of strapforward or back to lengthen or shorten. When pressure is applied to the buckle, it locks in place. Available in neoprene im-

pregnated nylon only.

Neoprene ImpregnatedNylon with Slide Buckle

Length 99E 77

Lockers Lockers

5'8" 344299E 344277

6' 346099E 346077

6'6" 346699E 346677

7' 347099E 347077

8' 348099E 348077

346099E

Easy toadjust the

length ofthe strap!

Neoprene Impregnated

Nylon with Tongue Buckle

Length 99E 77

Lockers Lockers

5'8" 384299E 384277

6' 386099E 386077

6'6" 386699E 386677

7' 387099E 387077

8' 388099E 388077

386099E


Woven Nylon with Friction BuckleThe woven nylon positioning strap uses a friction

buckle in conjunction with a carabiner.

4812Y-6

Length 99E 77

Lockers Lockers

5'8" 494299E 494277

6' 496099E 496077

6'6" 496699E 496677

7' 497099E 497077

8' 498099E 498077

494299E

Woven Nylon with Friction BuckleAdjusts easily with a friction buckle. Ideal fortransmission towers, substations or ladders.

Length 1706 1705Locking Snap Hook

6' 4812Y-6 48127Y-6

6'6" 4812Y-66 48127Y-66

7' 4812Y-7 48127Y-7

8' 48129Y-8 48127Y-8




NOTES






Tear Away Bungee Chainsaw Lanyard (Patented)

Model # Prefix

25B = Black

25Y = Hi-Vis Yellow

Chainsaw End

1 = 6" Nylon Loop w/ twist half hitch to saw

handle

Saddle End

2 = 1 1/8" Steel Ring

3 = #2 Bronze Boat Snap

4 = 3/4" Diameter Loop

Total Length(Fully Stretched)

42"

44"

46"

48"

50"

Options

A = 1 3/4" diametersteel ring to suspend

saw when not in use

"Suspended on saddle." "Fully stretched & ready to cut."

"Saddle attachment options."

CHAINSAW LANYARD & ACCESSORY STRAPS

Accessory StrapsAccessory straps are very handy and have multiple uses. They are made with 1" nylon and are available in 12" and18" lengths. They come standard with either a #2 bronze snap or 1 1/8" steel ring. Handy for stowing a chainsaw, or

adding attachments on a saddle. Available in black, uorescent green, orange and pink.

For 18" lengths add 18 to sufx (i.e. 60003G-18G)

Model 60002 12" Strap w/Ring black

Model 60003 12" Strap w/Snap black

Model 60002G 12" Strap w/Ring green

Model 60003G 12" Strap w/Snap green

Model 60002O 12" Strap w/Ring orange

Model 60003O 12" Strap w/Snap orange

Model 60002P 12" Strap w/Ring pink

Model 60003P 12" Strap w/Snap pink

Model 60002G

Model 60003P

Model 25Y12-46A1 3/4" ring usedto suspend saw

when not in use.

Elastic bungee de-

signed to minimizelength of lanyard

when stowed on

saddle.

Tear away safety pack

designed to activateif saw gets pinched in

a falling limb (takingonly the saw to the

ground).

1 1/8" ring used

to attach lanyardto saddle.

NOT TO BE USED WITH SAWS EXCEEDING 15 LBS. IN WEIGHT.

The Buckingham Tear Away Chainsaw Lanyard with the built-in

bungee is designed for safety and convenience. It is con-structed with a tear away safety pack that activates when 200

lbs. of force is applied. This feature eliminates the possibility ofthe user being pulled out of a tree if the saw gets hung up on

a falling limb. It measures up to 50" fully extended to provide

ample reach when cutting, but with the elastic bungee con-tracts to 32" when relaxed. This greatly reduces the possibility

of getting tangled when climbing or working aloft. The saw,if dropped will fall below the user's feet without falling to the

ground. To use, simply half hitch lanyard to the handle of the

chainsaw, and attach to climbing saddle using a 1 1/8" steelring, #2 bronze snap or 3/4" diameter loop. A 1 3/4" steel ring

is used to suspend the chainsaw when not in use. Available inblack or easy-to-see Hi-Vis Neon Yellow. See below for order-

ing information.



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


HANDLED ASCENDERSFor long ascents out away from the main stem, Buckingham offers two different kits: one for single rope technique, the other

can be used with a dual line (dynamic) system. Both systems utilize a sit/stand method of climbing and leave you with moreenergy to perform the tasks at hand once you have reached your destination.

Model 5002MB Mar-Bar Ascending Kit with an Adjustable Bungee Tether Strap

Used on a dual line (dynamic) system. Simply attach upper and lower Mar-Bars to climbing line, then attachthe bungee tether to your saddle using a carabiner (not included). The upper Mar-Bar can also be used byitself for a secured foot lock or body thrust without changing your set up.

Model 5002MB - Complete Mar-Bar Ascending Kit

Model 5002MBC - Adjustable Bungee Tether only

Model 5002MBO - Upper and Lower Mar-Bars only

Model 5004HAS Handled Ascender KitThe Handled Ascending Kit is used on a single line, and greatly reduces the energy

needed on long climbs.

Model 5004HAS Complete Handled Ascender Kit (carabiners not included)

Model 5004SO Ascender Sling only

Model 5004HAO Handled Ascenders only

RIGGING BLOCKS

Model RP130Tested to 28,000 lbs.

5/8" rope capacityWeight 2.25 lbs.(Model RP 131- 3/4"

rope capacity)

Buckingham's line of rigging blocks (also known as a false crotch) are designed to eliminate virtually all friction when remov-

ing heavy limbs. Also used to create a crotch where a natural one is not available.

Model 5007S Aluminum Rigging Blocks withstainless steel sheave and bushing pins and an

epoxy polyester coating over

aluminum.5/8" line 7"x4" (18x10 cm) 3 1/4

lbs.Tensile tested to 22,500 lbs.

Safe working load is 4,496 lbs.

Model 5007L3/4" line 9"x5" (22x12 cm) 5 lbs.Tensile tested to 22,500 lbs.

Safe working load is 4,496 lbs.

N E W F R O M

B U C K I N G HA M

!Designed to reduce premature wear on climbing lines and eliminate damage to tree limbs normally caused

by excess friction! Allows the user to install the blocks high into a tree without climbing: the blocksare set, and removed, from the ground or another tree using a plastic ball,

a throwline and throwbag. The dual housings are color coded to distin-guish which block has the small opening to anchor the plastic ball for

setup and removal. Once set, the two part rope channel snaps togetherusing powerful magnets inset within the system’s self aligning frame. Wheninstalled, the BuckBlocks Rigging System creates a basket style hitch

which results in evenly loading the two legs of the sling. The design islightweight, provides a better bend radius for rope, an improved running

surface with its dual rotating sheaves and the rope sling can easily be

replaced. Designed in conjunction with Arborists Scott Winningham andScott Prophett.

The BuckBlocks Rigging System is rated to a working load limit of 3 tons.

Sheave capacity: 5/8” rope.

BuckBlocks Rigging System Model 5006L (Patent Pending)

Model 5006L




Model 601N

THE MINI PORT-A-WRAP IIIAll the features of the Port-A-Wrap III are now available

in a mini Port-A-Wrap. At 1lb. 7oz. the Mini Port-A-Wrapis light enough to take aloft for light rigging applications.Finally a lightweight rigging device designed to be used

by arborists while working aloft.• Lightweight (1lb. 7oz.)

• Dimensions 5 1/2"W x 6 1/2"H• Safe working load 1000 lbs.

• Use up to 1/2" rope

Model 602AL shown in the "tied off" position.

PORT A WRAP & ACCESSORIES

AVAILABLE IN VARIOUS FINISHES AND SIZES

MODEL# SIZE MATERIAL COATING ROPE SIZE

UP TO:

WEIGHT

601M MINI STEEL POWDER 1/2" 1LB. 7OZ.

601MN MINI STEEL NICKEL 1/2" 1LB. 7OZ.

601 SMALL STEEL POWDER 9/16" 4LBS.

601N SMALL STEEL NICKEL 9/16" 4LBS.

601L LARGE STEEL POWDER 3/4" 7LBS. 4OZ.

601LN LARGE STEEL NICKEL 3/4" 7LBS. 4OZ.

602AL LARGE ALUMINUM HARD COAT ANODIZED 3/4" 3LBS.

Model 601BT Block & TackleComes with 50 feet of1/2" 16 strand

Blue Streak rope. Locking cam rated to500 lbs. Safe working load 2250 lbs. 5

to 1 lifting ration. Attaches to host linewith Tenex prusik (page 33) and steel

carabiner (page 41).

Still Made in the USA

Accessories used with the Buck Port A Wrap III

THE IMPROVED PORT-A-WRAP III

There isn't much we accept as good enough at Buckingham. First there

was the Port-A-Wrap; a good design, but with limited features. Then

there was the Port-A-Wrap II, a great improvement with a rope reten-tion bar and a second eye for lifting limbs when used with Model 601BT

shown below. Now there is the Port-A-Wrap III, designed with everythingnoted, plus more.

• More user friendly, designed to make attachment of rigging line

easier.• Secure rope retention bar - eliminates loss of wrap.

• Stronger, more durable construction.• Safe working load of 2000 lbs.

• Smooth surface with no sharp edges



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


Pulleys

Model RP104

5/8" rigging line4 1/2" (11.5cm) long 3" (5cm) wide 2 3/8" (6cm) sheave diameterMinimum breaking strength - 8500lbs.

Whoopie Slings

Whoopie Slings are manufactured with either coated 5/8" or 3/4" Tenex rope, and adjust in seconds from a minimum of 3' to

any desired length. See below for ordering information. Rated Capacity

(choke)39078TA - 6 3' to 6' Whoopie Sling 5/8" Tenex 2560 lb.39078TA - 8 3' to 8' Whoopie Sling 5/8" Tenex 2560 lb.

39078TA - 10 3' to 10' Whoopie Sling 5/8" Tenex 2560 lb.39074TA - 6 3' to 6' Whoopie Sling 3/4" Tenex 3380 lb.

39074TA - 8 3' to 8' Whoopie Sling 3/4" Tenex 3380 lb.

39074TA - 10 3' to 10' Whoopie Sling 3/4" Tenex 3380 lb.

Eye Slings

Eye Slings are manufactured with either Tenex or Stable braid rope and Samthene

coated enhancing Wearlife. Available in 5/8" and 3/4". See below for ordering informa-tion. Last digit designates sling length in feet (i.e. 39078T - 10 5/8" Tenex Sling 10').

39078T - * 5/8" Tenex 17,000 lb. Tensile39074T - * 3/4" Tenex 22,400 lb. Tensile

39078S - * 5/8" Stable braid 16,300 lb. Tensile39074S - * 3/4" Stable braid 20,400 lb. Tensile

* Designates sling length

Web Slings

Web Slings are manufactured with 1” polyester 8900 lb. tensile strength.

3905-36 - 36" overall length3905-24 - 24" overall length

3905E-18 - 18" overall length (endless loop)

Web Slings have many uses:- Can be used as a foot hold

- Works great as a redirect- Can be chocked around limbs or small brush piles and used as a handle

- Works great for light rigging applications

SLINGS & PULLEYS



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


NOTES






SHOCK ABSORBING LANYARDS

Buck Yard Buck Arrest/

Lanyard Buck Stop

Less than 900 lbs. Less than 900 lbs.

Nylon Rope Nylon Web

Lanyard Lanyard

2,400 lbs. 2,765 lbs.

Fall Arrest System

The arresting forces on a 220 pound steel mass (equivalent to a 308pound person) after a six foot free fall

Shock Absorbing Lanyards (ANSI Z359.1-2007)

The Buckingham deceleration lanyards reduce the impact force of a 220 pound (100 Kg) steel mass to less than 900 pounds

(318 Kg) in a six-foot (1.8 m) free fall. By contrast, in the same test, the arrest force of a rope lanyard is in the area of 2400lbs. (1089 Kg) and 2800 lbs. (1270 Kg) for a web lanyard. Shock-absorbing lanyards are not intended for work positioning,

suspension or retrieval. When 600 lbs. of force is exerted, the Buckingham shock absorbing lanyard starts to expand which

may extend an additional 3 1/2 feet (1.1 m) before arresting the fall. Shock absorbing lanyards and full body harnesses that

have been in a fall should be discarded and replaced with new equipment.

Buckingham Manufacturing offers fourdifferent styles of shock absorbing lanyards.Standard design shock absorbing lanyardsare returnable and can be ordered in 4', 4 1/2'

and 6' lengths. Buckingham Manufacturing

also allows you to design a shock absorbinglanyard from our matrix, specifying connec-

tion options and lengths. We’ll manufacturethe shock absorbing lanyard to accommodate

your needs. Matrix designed shock absorbing

lanyards are not considered standard design and therefore are not returnable.

Harness

Dorsal Attachment

Maximum

Lanyard Length

Steel Dee Ring 6' (1.8 m)

Web Loop 6' (1.8 m)

18" Pigtail 4 1/2" (1.4 m)

24" Pigtail 4" (1.2 m)

NEVER USE A LOCKING SNAP HOOK WITH A FULL BODY HARNESS DORSAL WEB LOOP!

Personal Energy Absorber / Energy Absorbing Lanyard - 6 ft. FF (ANSI Z359.13-2009)

The Buckingham Personal Energy Absorber/ Energy Absorbing Lanyard reduces the impact force of a 282 pound (128kg)steel mass to less than 900 pounds (4kN) in a six-foot (1.8m) free fall. Personal Energy Absorbers / Energy Absorbing Lan-

yards are not intended for work positioning, suspension or retrieval. When 600 lbs. (2.7 kN) of force is exerted, the Bucking-ham Personal Energy Absorber / Energy Absorbing Lanyard starts to expand which may extend an additional 4 feet (1.2 m)

before fully arresting the fall. Personal Energy Absorber / Energy Absorbing Lanyards and full body harness that have been

in a fall should be discarded and replaced with new equipment.

Personal Energy Absorber / Energy Absorbing Lanyard - 12 ft FF (ANSI Z359.13-2009)

The Buckingham Personal Energy Absorber / Energy Absorbing Lanyard reduces the impact force of a 282 pound(128 Kg) steel mass to less than 1,350 pounds (6 kN) in a twelve-foot (3.65 m) free fall. Personal Energy Absorbers /

Energy Absorbing Lanyards are not intended for work positioning, suspension or retrieval. When 600 lbs. (2.7 kN) offorce is exerted, the Buckingham Energy Absorber / Energy Absorbing Lanyard starts to expand which may extend an

additional 5 feet (1.5 m) before fully arresting the fall. Personal Energy Absorber / Energy Absorbing Lanyards and full

body harness that have been in a fall should be discarded and replaced with the new equipment.

- When using a full body harness with a steel dee ring dorsal attachment, only use a shock ab-

sorbing lanyard with a locking snap hook or a locking carabiner connector.



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


The Buckyard Stretch offers the same benets as the Buckyard with the addition of elastic Bungee. This feature

reduces a 6' lanyard to approximately 44" greatly reducing trip hazards while climbing in and out of an aerial basket.

The Buckyard Stretch is available in 4, 4 1/2 ft. and 6 ft. non-adjustable lengths.When ordering an FR lanyard, add the 'S1' suffix to the model #; e.g.: 84V716S1.The +Z Suffix indicates the hardware meets ANSI Z359.12-2009. To order a lanyard with

the 1706 locking snap hook drop the +Z suffix.

Indicates meets ASTM F887Electric Arc PerformanceRequirements.

STANDARD DESIGN SHOCK ABSORBING LANYARDSThe Buckyard has the exibility of a standard web or rope lanyard with the benet of a reduced arresting force. The

tubular nylon exterior may expand 42" maximum while the interior material stretches to reduce the arresting force toless than 900 pounds. The Buckyard is available in 4, 4 1/2 ft. and 6 ft. non-adjustable lengths.

When ordering an FR lanyard, add the 'S1' suffix to the model #; e.g.: 84V116S1.

The +Z Suffix indicates the hardware meets ANSI Z359.12-2009. To order a lanyard with the 1706 (non 3600lbs.)locking snap hook drop the +Z suffix.

FOR FULL BODY

HARNESS w/ STEEL

RING DORSALATTACHMENT

Model Length8VV114+Z 4 feet (1.2 m)

8VV114.5+Z 4.5 feet (1.4 m)8VV116+Z 6 feet (1.8 m)

(e.g.: 84V116+Z: 6' (1.8 m) length with loop on one end and locking snaphook with 3600 lb. gate load on the other for use on harnesses with a dorsal

web loop.)

8VV116S1+Z 84V114+Z

84V714.5+Z8VV714.5+Z

FOR FULL BODY

HARNESS w/STEEL

RING DORSAL

ATTACHMENT

Model Length

8VV714+Z 4 feet (1.2 m)

8VV714.5+Z 4.5 feet (1.4 m)8VV716+Z 6 feet (1.8 m)

(e.g.: 84V716+Z: 6' (1.8 m) length with loop on one end and lockingsnap hook with 3600 lb. gate load on the other for use on harnesses with

a dorsal web loop.)

Indicates meetsANSI Z359.12-2009

To order Buckyards meeting ANSIZ359.13-2009 for a 6' free fall addoption X6. E.g.: 8VV116X6.To also meet ASTM F887 addoptions S1X6. E.g.: 8VV116S1X6.




Indicates meetsASTM F887 ElectricArc PerformanceRequirements.

Adjustable Length Woven Nylon with

Locking Snap Hook on One End andWeb Loop on the Other EndModel Length

- -

- -

64V126+Z 6 feet (1.8 m)

Fixed Length Woven Nylon

with Locking Snap Hook on One Endand Web Loop on the Other EndModel Length

64V114+Z 4 feet (1.2 m)

64V114.5+Z 4.5 feet (1.4 m)

64V116+Z 6 feet (1.8 m)

Adjustable Length Woven Nylonwith Locking Snaps on Both EndsModel Length

6VV124+Z 4 feet (1.2m)

6VV125+Z 5 feet (1.5m)

6VV126+Z 6 feet (1.8 m)

Fixed Length Woven Nylon withLocking Snaps on Both EndsModel Length

6VV114+Z 4 feet (1.2 m)

6VV114.5+Z 4.5 feet (1.4 m)

6VV116+Z 6 feet (1.8 m)

For Full Body Harness w/Steel Ring Dorsal Attachment

Adjustable Length Woven Nylon

with Locking Snaps on Both EndsModel Length

5VV124+Z 4 feet (1.2m)

5VV125+Z 5 feet (1.5m)5VV126+Z 6 feet (1.8 m)

Fixed Length Woven Nylon with

Locking Snaps on Both EndsModel Length

5VV114+Z 4 feet (1.2 m)5VV114.5+Z 4.5 feet (1.4 m)

5VV116+Z 6 feet (1.8 m)

For Full Body Harness w/Steel Ring Dorsal Attachment

Fixed Length Woven Nylon with

Locking Snap Hook on One Endand Web Loop on the Other EndModel Length

54V114+Z 4 feet (1.2 m)

54V114.5+Z 4.5 feet (1.4 m)54V116+Z 6 feet (1.8 m)

Adjustable Length Woven Nylon with

Locking Snap Hook on One End andWeb Loop on the Other EndModel Length

- -

- -54V126+Z 6 feet (1.8 m)

6VV114+Z64V114+Z

5VV114+Z54V114+Z

6VV126+Z

5VV126+Z

5VV116S1+Z

The Buck Stop features a 6" shock pack covered by clear shrink tube making inspection easy.

When ordering an FR lanyard, add the 'S1' suffix to the model #; e.g.: 54V116S1.The +Z Suffix indicates the hardware meets ANSI Z359.12-2009. To order a lanyard with the 1706 lockingsnap hook drop the +Z suffix.

STANDARD DESIGN SHOCK ABSORBING LANYARDSThe Buck Arrest features a 16" shock pack covered by a water resistant nylon tube that reduces the bulkiness of

the pack on the back. When ordering an FR Buck Arrest add the ‘S2’ suffix to the model #; eg: 64V114S2+Z.The +Z Suffix indicates the hardware meets ANSI Z359.12-2009. To order a lanyard with the 1706 locking

snap hook drop the +Z suffix

For Full Body Harness w/Web Loop Dorsal Attachment

For Full Body Harness w/Web Loop Dorsal Attachment

Indicates meetsANSI Z359.12-2009

To order a Buck Arrestor Buck Stop meetingANSI Z359.13-2009 fora 6' free fall add optionX6. E.g.: 6VV116X6or 5VV116X6. To alsomeet ASTM F887 addoptions S1X6 or S2X6.E.g.: 6VV116S2X6 or

5VV116S1X6.

To order a Buck Arrest orBuck Stop meeting ANSIZ359.13-2009 for a 12'free fall add option X12.E.g.: 6VV116X12 or5VV116X12. To also meetASTM F887 add optionsS1X12 or S2X12.E.g.: 6VV116S2X12 or5VV116S1X12.



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


ROPE SNAPS & ASSORTED HARDWARE

Option L: Model 1705 Locking Rope Snap [1" (25mm) eye (I.D.), .812" (20.6 mm) opening (keeper to

bill in open position), 5 1/2" (140 mm) length Ratedto 5000 lbf. (22 kn)] or, when using suffix +Z in

part number, Model 17051 Locking Rope Snap

(not shown) with a 3600 lb gate load.

Option V: Model 1706 Locking Rope Snap with a 350 lb

gateload, or when using sufx +Z in part number, Model 17061Locking Rope Snap with a 3600 lb gate load.A rope snap that

works like a non-locker. Designed for ease of use when attach-

ing and detaching to the saddle dee rings. Overall length is 6".Rated to 5000 pounds 22(kn).

Option +N: 1710 Locking

Aluminum Snap .75" (19 mm)eye (I.D.), .875" (22 mm) opening,

5.375" (137 mm) length Rated to7,200 pounds (32.7 kn.)

3130 (Option R); Large Locking Ladder Snap1” (25mm) eye (I.D.), 2.5” (63.5mm) opening, 9 3/4” (248mm)length, 1 lb. 8 oz. weight. Rated to 5000 lbf. (22kn) or when usingsuffix +Z in part number, Model 31301 Locking Ladder Snap

with a 3600 lb gate load.

31301

Thimbles

1 - 5/8” (16mm) plastic (350411)2 - 1/2” (13mm) plastic (350410)

3 - 1/2” (13mm) metal (350408)4 - 1/2” (13mm) metal (350409)

1 2 3 4

1709 (Option +7); Locking Rope Snap[1” (25mm) eye (I.D.), 3/4” (19mm) opening, 6 1/8” (156mm)length, 10.2 oz. (290gm) weight. Min. tensile strength 5000

lbs. (22kn)] or, when using suffix +Z in part number, model

1712 Locking Rope Snap with a 3600 lb gate load.

1709 1712

Indicates meets ANSI Z359.12-2009 standard.

Option Z: Model 3129 Small Locking Ladder

Snap 1" (25 mm) eye (I.D.), 1.750" (44.5 mm)

opening, 8 1/8" (206 mm) length, 1 lb. 3 oz.weight Rated to 5,000 pounds (22 kn.)

3130

Model 5009E

Figure 8 with Ears

1706 17061

Option +W: Model 1714 Locking Rope Snap 1.2"(30 mm) Eye (I.D.), .81" (21 mm) opening, 5.83"(148mm) length, 13.8 oz (391 gm). Rated to 5000 lb(23 kn).

Model 3032L Spreader Snap Hook 1" (25 mm) eye, 9" (229 mm) Long, 5/8" (16 mmopening. Rated to 5000 pounds (22 kn.)

Model 5009 Figure

8 without Ears




CARABINERS

5555SA Ball Lock Aluminum

Carabiner (Option +2)Length – 4.25" (108 mm)

Opening – ..826" (21 mm)Breaking Strength – 6295 lbs. (28 kn.)

5005SA Auto Lock Aluminum

Carabiner (Option A)Length – 4.5" (114 mm)Opening – .75" (19 mm)

Breaking Strength – 6700 lbs. (30.4 kn.)

5005SAE Auto Lock Aluminum

Carabiner with eye (Option U)Length – 5.25" (133 mm)Opening – .71" (18 mm)


5005 Auto Lock Steel

Carabiner(Option D) w/ 3600 lb. gateLength – 4.5" (114 mm)

Opening – 1" (25.4 mm)Breaking Strength – 9,217 ibs. (41 kn.)

5005M Screw Gate Steel Carabiner*Length – 4.5" (114 mm)

Opening – 1" (25.4 mm)

Breaking Strength – 11,240 lbs. (51 kn.)

5005T Twist Lock Steel Carabiner*Length – 4.25" (108 mm)

Opening – 1" (25.4 mm)Breaking Strength – 8,992 lbs. (40.8 kn.)

5005NA Non-Locking

Aluminum Carabiner*Length – 4.5" (114 mm)Opening – 1.1875" ( 30 mm)

Breaking Strength – 5000 lbs. (22 kn.)

5005NIA Non-Locking Aluminum

Carabiner*Length – 4" (102 mm)Opening – .78" (20 mm)


5555WSA William Ball Lock

Aluminum CarabinerLength – 4.5 (114 mm)

Opening – 1" (25.4 mm)Breaking Strength – 5625 lbs. (25.5 kn.)

5555SI AM'D Aluminum CarabinerLength – 4.25" (108 mm)Opening – .826" (21 mm)

Breaking Strength – 6295 lbs. (28 kn.)

OK

*WARNING: NOT INTENDED FOR HUMANSUPPORT OR FALL PROTECTION

NO

Indicates meets ANSI Z359.12-2009 standard.

5555S2 Aluminum Carabiner(Option +X ) w/ 3600 lb gate

Length - 5.83" (148mm)

Opening - .69" (17mm)Breaking Strength - 6290 lbs (28 kn)



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


We manufacture a full line of equipment de-

signed for work positioning and fall arrest.Our belts and harnesses are made of only

the highest quality materials available andcomponents are inspected before, during

and after product manufacture. In addition,random samples are tested to destruction

by our Quality Control Department.

Please remember:

• Belts and harnesses are only part of aproper fall arrest safety system.

• Aerial belts should not be used where the

fall potential is more than two feet.• Although belts are acceptable, the best

piece of personal fall protection equip-ment is the full body harness.

If you do not see the style of belt or harness

that you need, please contact us.

Order Aerial Belts by Waist Size

X Small–24-28Small–28-32

Medium–32-36

Large–36-40X Large–40-44

Belts And Harnesses Are

To Be Used By Trained

Professionals Only

Each time a belt or harness is used, itshould be inspected for such things as:

• cracks, nicks, distortion or corrosion inhardware

• loose stitching, broken threads or burns

• loose or improperly-peened rivets• improperly-operating keepers–(locking &

standard)• worn material

Model 38526The construction of this model is

identical to the 3852 except the deering is stitched permanently in the

center of the back.• Also available without woven back

pad. Model 38084

Model 3852Made of 1 3/4" (44mm) woven nylonsewn to a man-made synthetic mate-

rial for wear. A 3" (76mm) wide soft

woven pad is attached for addedcomfort. The billet end of the strap

has 7 grommet holes for adjustment.• Also available without woven back

pad. Model 3808

Model 5919

5" (127 mm) Pad

A 5" (127 mm) wide back sup-port lined with soft top grainliner leather. Waist strap is 1

3/4" (44 mm), 6-ply neopreneimpregnated nylon that sup-

ports a oating dee ring. The

billet end of waist strap has 9adjustment holes.

Model 2022

5 1/2" (140 mm) PadThis aerial belt is designed to pro-vide the user with maximum mobility

because of the sliding dee ring. The

5 1/2" (140 mm) pad and waist strapare both made of strong neoprene

impregnated nylon. Waist strap has9 adjustment holes.

Aerial Waist Belt w/Single Floating "D" Ring

Aerial Waist Belt w/Single Stationary "D" Ring

AERIAL BELTS

Fixed Length w/1706 Locking RopeSnap Hooks on Both Ends

Model Length

7VV112 2 feet (.6m) — For Fall Restraint

7VV112




68D7G8C600V9

Buckingham Manufacturing offers a full array of standard design full body harnesses to be used in fall arrest, work positioning,suspension, retrieval and rappelling applications. Standard design harnesses are returnable and can be ordered in sizes S, M,

L, & X.

This Buckfit is an ‘H’ style full body harness featuring:

• A Dri-lex® shell that is designed to wick moisture away from the

user and padded Dri-lex® shoulder and leg pads for added over-all comfort.

• Buckingham’s patent pending split tongue Quick Connect Buckles

with leather chafes on the chest and leg straps.• Steel Dee ring for dorsal attachment.

• Spring loaded friction buckles for height adjustment.• Made from Type 13 nylon webbing with silver upper and black

lower sections.• Meets applicable ANSI standards.

HARNESS SIZING MATRIX

CHEST SIZE

HEIGHT 34-36 38-40 42-44 46-48 50-54 56-60

5'4"-5'7" S S M L X XX

5'8"-5'11" S M L X XX XXX

Tall (6'0"-6'3") M M L X XX XXX

6'3" + L L X X XX XXX

S = Small; M = Medium; L = Large, X = Extra Large; 2X = XXLarge; 3X = XXXLarge.

An ‘H’ style full body harness featuring:• The Buckingham patent pending split tongue Quick Connect Buckles with leather

chafes on the chest and leg straps.

• Steel Dee dorsal attachment.

• Friction buckles mounted on vertical shoulder strap for height adjustment.• Meets all applicable ANSI, OSHA and/or ASTM standards.

• Order by adding S, M, L, X, to part number; non-standard sizes available uponrequest.

68D98C600

Indicates meets ASTM F887 Electric Arc Performance Requirements.

An ‘X’ style full body harness featuring:

• Interlocking torso & leg strap buckles.• Reinforced web loop dorsal attachment used to half hitch shock absorbing lanyard.• Fully adjustable interlocking torso buckles are for height adjustment.

• Reinforced web front loop that can be used for rescue or rope/cable grab.• Made from Type 10 nylon webbing with red upper and black lower sections.

• No chafes behind buckles.• Meets all applicable ANSI and/or ASTM standards.

• Order by adding S, M, L, X, to part number; non-standard sizes available upon request.

603E3700R3

HARNESSES



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


BUCKET TRUCK & SUSPENSION RESCUE SYSTEMS

106-50 Buck Self Rescue System

Provides the means to safely and easily descend to the ground in the event of:

• A fall from the bucket • The need to evacuate an inoperable bucket

Victim suffers falland hardhat is lost.

Pulls componentsfrom bag.

Attaches descenderto rappelling loopson harness.

Steps up into ladderto slacken the shockabsorbing lanyard.

Steps down on ladderuntil supported bydescender and thenremoves feet from ladder.

Disconnects shockabsorbing lanyard.

Descends safely tothe ground.

IDEALFOR THE

'ONE MAN'CREW

106-50

The system combines a specially designed bag that, when deployed, releases a ladder [to relievepressure], an ascender, descender and 50' of rope. Longer lengths are available upon request.




High Elevation Self-Rescue System

Should there be a need to self-rescue or rescue someone else froman elevated height, such as an inoperable bucket truck, the new

Buckingham 101SR makes it easy. The Buckingham 101SR provides allthe components required to self-rescue or if the need arises to rescue afellow employee. The 101SR descender will automatically stop the user

until the user compresses the handle allowing a smooth controlleddescent. An additional built in (anti-panic) safety feature stops descent

if the user compresses the handle too hard. This unit will allow the

rescuer the advantage of lowering a hurt person with ease as well. The101SR kit comes with retrot rappelling straps that can be added to an

existing harness for self-rescue.

101SR-50 (50' 1/2" braided rope)101SR-75 (75' 1/2" braided rope)101SR-100 (100' 1/2" braided rope)4563 Bag only

Custom lengths available and packed in a back pack rope bag.

Model 101SR-50

BUCKET TRUCK & HIGH ELEVATION RESCUE SYSTEMS

For Bucket Truck Rescue and

High Elevation RescueOrder Model 108-95.

THE HURT MAN BUCKET TRUCK BASKET REMOVAL 3813Should a fellow employee experience an accident where they fall to the bottom of the basket oor, removingthem without a mechanical advantage can be near impossible. The 3813, with the stainless steel block andtackle provides a lifting ratio of 5 to 1 with 95' of double braid, 11 mm rope. Since harnesses are predominately

used in bucket trucks, the ability to lift the victim higher is a must to clear the top of the basket. Buckingham hasaddressed this by a higher mount on the boom and a lower cord to deploy and activate the block and tackle

system.3813

Unit designed to stay on

boom at all times.

3813D1

Boom strap with dee ringstays on boom. Rescue

blocks are stored in acompartment of the line

truck.

5 to 1

lifting ratio

Ratchet with built-in

pin so once fastenedit stays secured.

Non-slip adhesive rubber toprevent slippage.

Ratchet Boom Strap

Model 3809R

(5000 lbs. rated)

The ratchet boom strap provides a secure anchor on the bucket truck boom.



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


Bucket CoversBuckingham aerial basket covers are made of heavy gaugeorange vinyl reinforced with nylon. The covers hold tight to

the basket with an elastic cord keeping rain and snow out. Agrommet and shock cord are attached for a tie line. Avail-

able in orange, yellow and black. See below for orderinginformation.

Model 4545Orange single man bucket cover ts up a 29" squarebucket.

Model 4545YSame as 4545 except yellow in color.

Model 4545B

Same as 4545 except black in color.Model 4548Orange two man bucket cover. Fits upto a 50" x 62" (1.3 x 1.6 m) basket.


Model 4548B3Same as 4548 except black in color.

Model 45455Orange single man bucket cover with

a berglass pyramid shaped insert29"x29" (.7m x .7m) for water drainage.

Outer cover same as 4545.


Model 45455BSame as 45455 except black in color.

Wire DispensersA new design with strength where it is needed. Raise thepivot swing arm, drop in the coil of cable, lower the arm,

secure using the bolt and wing nut, cut bands and feedstrand. No unneeded metal bands with this sturdy tool.

Handles full coils with ease while storing partially used onessafely.

A time and labor saver.

Model 61506 1/2" D x 30" W (17 x 76 cm)Weight 10 lbs. (4.5 Kg)

Model 615018" D x 36" W (20 x 91 cm)

Weight 12 lbs. (5.4 Kg)

Wheel ChocksBuckingham wheel chocks grip the surface and the tire for a

positive lock. The interior of wheel chocks (Models 4558 and4559) have a void in the center to allow easy handling. Solid

rubber chocks are available upon request.

Model 4558Smooth 10" x 8" x 5.5" (25 x 20 x 14 cm)Weight 7 lbs. (3 Kg)

Model 4559Ribbed 10" x 8" x 6" (25 x 20 x 15 cm)Weight 8.5 lbs. (4 Kg)

Model 6150

BUCKET TRUCK & MISCELLANEOUS ACCESSORIES

Model 4559

Model 4558




Ladders and rounded poles are a potentially dangerous combination.

Buckingham offers a ladder safety solution that includes ladder safetystraps enclosed in bags that are attached to your ladders. No more

forgetting the safety straps in the vehicle or the garage. Straps are ready

for deployment when the ladder goes up to prevent kickout and exces-sive rocking. The Buck Ladder Lock is designed for poles and trees.

The Buck Ladder Lock advantages include:• Bags that do not interfere with the climbing space of the technician’s foot

or interfere with the storage of the ladder on the truck.

• Highly visible brightly colored bags to remind technicians that protectionis required.

• Quick access to straps.• Weather resistant storage bags.

• Complete system with top and bottom bags and straps; 355BT

• Bottom bag and straps; 355B• Top bag and straps; 355T

BUCK LADDER LOCK SYSTEM MODEL 355BT

355T355B

Model 355BT, the Buck Ladder Lock

Solution with both top and bottom storagebags & straps.

Model 355T, Orange Top Storage Bag & Straps

Model 355B, Yellow Bottom Storage Bag & Straps



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


Model 4514

Chainsaw ScabbardThe berglass chainsaw scabbard is

designed to store your gas powered

or hydraulic chainsaw from your aerialbasket. It can be used to mount on the

inside or outside of the basket. Overall

length is 32” (81cm). Storage chamber

is 6” x 3 1/4” x 17 1/2”

(15cm x 8cm x 45cm).

Model 4512This tray is smaller in design that attaches on the

outside of bucket using the berglass lip included.

11 1/2" x 6" x 8" (29 x 15 x 20 cm)

Fiberglass

Tool Trays

Model 4531R

Model 45311RC

Model 4510 A berglass storage tray that may be hung on the

inside or outside of an aerial basket. Can be used to

conveniently store cabling and other miscellaneous

equipment. Mounts using one pair of 5334 PVC

hooks (included).

18" x 9" x 11" (46 x 23 x 28 cm)


Model 4514W

Chainsaw Scabbardwith reinforced pocket for added

durability of the chainsaw pocket.

Reinforced replacement pockets areavailable and can be ordered with

part number 45141W.

Boom Mounted Hydraulic Tool HoldersThe long reach hydraulic tool holders

mount to the boom of the truck safely and

securely, storing your long reach chainsawor pruner when not in use. The holder

mounts to the boom using a ratchet for a

sure grip. It is important not to over tighten

the ratchet. Available for round and square

booms.

Hydraulic BoomTool Holders

Round Boom Square Boom

Handle End 4530R 45301RReplacement clip 45302** 45302**

Chain Saw 4531R* 45311R*

Replacement Pocket 45312** 453112**

Pruner 4532R* 45321R*

Replacement Pocket 45322** 453212**

* Extra long base available to prevent damage to boom when inserting and

removing tool. Add sufx “C” (i.e. 4531RC)

** All replacement parts come with sticky backed foam and fasteners.

Model 4530R




NON - ROTATING LONG REACH BUCKET TOOL HOLDER

The economical long reach bucket tool holder offers the user a secure method to hold long reach tools horizontally on thebasket lip and vertically inside the basket. It does not allow the tool holder clip to rotate 360 degrees nor allow the user to

physically move the clip from horizontal to vertical position as the 4590 model. The non-rotating version does provide the user

a permanent vertical and/or horizontal mount. This unit provides multiple options to accommodate the user's needs as shown

below:Mounting Brackets

4589

Two of the 4589 mounts allows user to

hold one single stick.

4589

4589

4589 45891

Mount two 4589's to hold one tool horizontal.

Mount 4589 and 45891 to hold multiple tools - two verticaland one horizontal.A combination of 4589/45891 allows

user to hold one saw horizontal and

two vertical.

45891

Model 694F1• Buckmix – 50 lbs. or rubber pellets

Rescue Buck Model 694 is ideal for aerial rescue training. Made of

heavy Denier cordura nylon, it is designed for many years of service. Indi-vidual compartments can be lled with Buckmix to desired weight. Nylon

retention straps are sewn to the mid-section to prevent saddle from sliding

up or down.

Height - 5' 6" (1.68 m)



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


Oval Canvas Buckets

Model 12161

Oval bucket with 15inside pocketsdesigned to

suspend fromaerial basket using

the 2 PVC hooks

included.

Model 12162Oval bucket with 15 inside pockets, 3ropes connecting to a heavy duty snap

for suspension. Can be used to sus-pend equipment while aloft in a tree.

Model 12163

Round Canvas Buckets

Model 11215Our canvas buckets are made with

heavy duty cotton duct making themvery durable. An inside pocket is in-

cluded for convenience. Available with

a rubber or leather bottom and withor without suspension snap. 12" dia. x

15" tall (30cm x 39cm). See below forordering information.

Similar to Model 12162 except

manufactured with a three rope sus-pension system and swivel snap.


Model 121615CH1LAn oval bucket designed tobe used as a tool caddy or

suspended from an aerial bas-

ket. 15 inside and 14 outsidepockets provide ample roomfor storing tools. A reinforced

center prevents the bucket from

collapsing due to weight. Nylonweb carry handles, heavy duty

canvas, and molded bottomare provided for maximum

durability. Large grommet holes

accommodate bucket hooksshown at bottom of page.

Model 1215Compound rubber bottom with suspension snap.

Model 1217Compound rubber bottom without suspension snap.

Model 11215Leather bottom with suspension snap.

Model 11217

Leather bottom without suspension snap.

Bucket Hooks

Model 240111/16" Polymer hooks designed to t standard lip

baskets.

Model 50343/4" PVC hook designed to t

standard lip baskets. Also avail-

able to t wide (3") lip baskets.Model 5334

Model 2403

5/8" Nylon hook designed to t wide (3") lip baskets.

Model 53585/8" PVC hook designed to

t wide lip (3") baskets. Alsoavailable to t standard lip

baskets. Model 5058



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


NOTES






Model 6223C BeltingModel 6223 Leather

Dual saw scabbard.Large pocket is de-

signed for curved bladepruning saws with up

to a 24" blade. Small

pocket ts curved blade

pruning saws with up toa 16" blade.Large Pocket

26" (66cm) overall length

21" (53cm) pocket depthSmall Pocket

17" (43cm) overall length16" (41cm) pocket depth

Model 60212C Belting

Model 60212 Leather

Chainsaw saw scabbard. Pre-

vents damage to chain andother equipment. For use

with bar lengths from 12" to 14". 12 3/4" (32cm) overalllength; 12" (30cm) pocket depth.

Model 6022C Belting

Model 6022 Leather

Chainsaw saw scabbard.

Use with bar lengths from16" to 20". 18 1/4" (46cm)

overall length; 17" (45cm)pocket depth.


Pole saw scabbard ts

Fanno blade F1-17S.16" (41cm) overall

length

16" (41cm) pocketdepth

4" (10 cm) wide


Pole saw scabbard ts

Fanno blades #16 and #17as well as Mundo pruning

saws.

16" (41cm) overalllength

16" (41cm) pocketdepth

4" (10 cm) wide

SAW SCABBARDSBuckingham's line of pruning saw scabbards are made from the highest quality top grain leather orrubberized belting material. They feature a 1/2" nylon washer and double thick leather spacers on thetooth side to ease inserting and removing the saw from the scabbard. A 1 1/8" steel ring is attached to

the back, 3" down from the top, to suspend scabbard and saw closer to the user. Clean out openingson the side and bottom to prevent buildup of saw chips and dust in the bottom of the scabbard.

Saw Saw Model # Compatible Scabbards [Scabbard information & pictures below & on following pages]

Corona

Fanno

Gilmour

Hastings

Jameson

Marvin

7100-1, AC7240,

AC7241

16, 20

20, 20B, 2011,2011B

P11004

SB-1C, SB-2,

SB-4, SB-5U,PS-3

S-17, S-18,

S-19, S-20

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

6515CS65156C 6515 6515C 6515P 6515CP 6015 6015C 6223 6223C 6517 6517C 6515S 6222 6222C

X X



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


Model 6226C BeltingModel 6226 Leather

Fits curved blade hand pruning

saws with a26" blade.

30" (78cm)overall length

26" (66cm)pocket depth

SAW SCABBARDS

Model 6222C Belting

Model 6222 Leather

Fits curved blade hand

pruning saws with 22"and 24" blades.


Model 6515C Belting

Model 6515 Leather

Designed to be usedwith curved blade hand

pruning saws with upto a 16" blade.

3 1/2" (9cm) x 19 3/4"(50cm) overall length

3" (8cm) x 15" (38cm)

pocket depth

Model 6208C Belting

Model 6208 Leather

Straight saw scabbards.

Designed to be used withpruning saws with a 22" to

26" blade length. See below

for ordering information.26" (66cm) overall length

19 1/2" (50cm) pocket depth6221C Belting6221 Leather


Model 6515CP Belting

Model 6515P Leather

Designed to hold curved blade

hand pruning saws with a 16"

blade. A leather pruner pouchis included to hold hand prun-

ers.Scabbard

3 1/2" (9cm) x 19 3/4" (50cm)

overall length3" (8cm) x 15" (38cm) pocket

depthPruner Pouch

2 1/2" (5cm) x 5 3/4" (12 cm)

Model 6016C Belting

Model 6016 Leather

Fits straight blade hand prun-ing

saws with up toa 16" blade.

19 1/2" (49cm)

overall length14 1/2" (37cm)

pocket depth




Model 6515CSModel 6016S

Leg Mounted Pruning Saw Scabbard• Allows quick and easy access of your pruning saw when working inawkward positions

• Velcro cinch straps provide a secure attachment to your leg

• Strap loops offer adjustment for the length of your leg• Elastic strap with snap fastens around saw handle preventing it from fall-

ing out when not in use• Designed to t Banana or dee handle pruning saws with up to a 13”

straight or curved blade

• Available in leather or rubberized beltingSee below for ordering information:

Model 6515S Leather Curved Handle Saws

Model 6515CS Rubberized Belting Curved Handle SawsModel 6016S Leather Straight Handle Saws

Model 6016CS Rubberized Belting Straight Handle SawsFor left hand model add sufx 'L' ie. 6515CLS

Model 6015 Leather - Pole Saw Scabbard

Model 6015C BeltingPrevents damage to pole saw blades and other

trequipment when not in use.

3 1/2" (9cm) x 16" (41cm) overall length3" (8cm) x 15" (38cm) pocket depth

Model 6517C - Climbing Pole Saw ScabbardSimply clip the scabbard onto your belt, slip your pole saw

into the scabbard, fasten the strap and you're ready toclimb.

Model 6517C Belting Model 6517 Leather

SAW SCABBARDS

MISCELLANEOUS EQUIPMENT

Heavy Duty Belt

Model 6287A sturdy 1 3/4" leather (4 cm) belt to carry slotted

tool holster.

Spray Can Holder

Model 4076A convenient way to carry tree spray

paint.

Hand Pruner Pouch

Model 4061The compact shape holds shear type

pruners. Snap fastens over 1 3/4"(4cm) belt.

Model 1987 Loggers BeltThe construction of this belt fea-

tures 7" (18cm) of high qualitylatigo leather for superior back

support. The 3" (8cm) belt strap

is backed with 3-ply neopreneimpregnated nylon and has a

single tongue buckle for addedstrength. It has two dee rings

on each side for use when both

horizontal and vertical lines areused at the same time. Seven

leather loops are included tokeep tools accessible. To ensure proper t, order by dee

size.



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


MISCELLANEOUS SCABBARDS AND GUARDS

Model 6020 (Leather)

Hydraulic Chainsaw ScabbardModel 6020C (Belting)

3 1/4" (11 cm) x 15" (38 cm) Overall3 1/4" (8 cm) x 14 1/2" (37 cm) Pocket


Manual Pruner Guard (Large)

For pruners with 1 1/2" cutting

capacity.Model 6019C (Belting)

4 1/2" (11 cm) x 6 3/4" (17 cm)


Single Edge Axe CoverModel 6030C (Belting)

4" (10cm) x 9 1/2" (24cm)Blade end depth 5 1/2" (14cm)


Hydraulic Pruner GuardModel 6031C (Belting)

7 1/2" (19 cm) x 7 1/2" (19 cm) Overall6 3/4" (17 cm) x 6 3/4" (17 cm) Pocket

Model 6225-21 (Leather)

Bow Saw Blade

Specify length when ordering.

Model 6225-21 Fits 21" saw bladeModel 6225-24 Fits 24" saw bladeModel 6225-30 Fits 30" saw blade


Brush Axe GuardModel 6217C (Belting)

18" (45cm) overall depth12" (30.5cm) pocket depth

6 1/2" (16.5cm) width


Hydraulic Circle Saw GuardModel 62005C (Belting)

Fits circle saws with 9"blades.

Model 60299C (Belting)

Double Edge Axe CoverModel 60299 (Leather)

5 3/4" (15cm) x 11 1/2" (29cm)


Manual Pruner Guard (Small)Pruners with 1" cutting capacity.Model 6017C (Belting)

3 3/4" (10 cm) x 4 1/2" (11 cm)


Single Edge Axe CoverModel 6029C (Belting)

3" (8cm) x 5" (13cm)



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


NOTES


http://slidepdf.com/reader/full/buck-2010-catalog 79/92Courtesy of C.O.R.




EQUIPMENT BAGS & ROPE BAGS

Model 45332R5The hard rubber bottom equipment baghas a two inch molded rubber lip that

prevents water from seeping into thebottom of the bag. The heavy gauge

rubber bottom is double stitched to thebag and is very durable, even in coldweather. Can be manufactured on any

Buckingham equipment bag measuring11" wide by 24" long.

45331YDimensions 17"H x 11"W 24"L

• Made of heavy duty yellow coated

nylon

• Completely weather proof with fold

over storm ap

• Roomy inside pocket for storage

of small parts

506P7-14 Small Tool Bag

• Heavy canvas for maximum durability

• Two large outside pocket with snap

fasteners• Heavy duty zipper closure

• Tempered Masonite bottom• 1” web carry handles

• Measures 14” L x 9” H x 6” W

Dimensions 18"L x 9.5"H x 9.5"W Also available Model 45400-12 (12”)and 45400-24 (24”). Same construction as standard 45400 except lengthdifference.

An economically priced equipment

bag with features and quality ofbags costing much more. Two large

(20" x 5" x 11") outside pockets can

be secured with three snap fasten-ers. Vinyl coated nylon rain ap

and heavy duty leather straps andbuckle to secure bag closed


41333

45333R5SY

Dimensions 19” H x 11” W x 24” L.

Two inch molded rubber lip protects

against water getting into bag. Heavygauge rubber for superior strength.

The rigidity of the formed rubberbottom allows bag to maintain its

shape. Double stitched body to therubber bottom. Cleats on bottom are

designed to prevent water from being

absorbed.

Ideal for carrying personal fall

protection equipment. Made from

heavy weight red water resistantpolyester with strong nylon handles

with a 1,000 lb. break strength. Nylonzipper closure that won’t corrode or

bind. Available in blue, add sufx Bto end of model number.

45400R2-18

N E W

Ultra light bag made of super heavy duty materials; can be worn in manynew ways: e.g. attached to the leg or to the saddle [requires 2 carabiners

to attach to back of saddle].• Includes two 2" elastic straps which allow easy fastening of bag to usersleg regardless of size or shape.

• Zippered expansion sleeve to allow easy stufng of climbing line forstorage and reinforced sides are stiff for easy stufng.

• Large grommet on the bottom of the bag allows both ends of rope to beused during rescue or working operations.

• Made with 22 oz. vinyl and climbing grade webbing with double

reinforced seams.• Draw string skirt closure allows for easy deployment and storage while

aloft.• MOLLE webbing stitched along bag seams allows user to change position

of elastic straps or can be used for easy storage of accessories.

4369B3 BuckTube Rope Bag

Measures 7” diameterx 20” long



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


Model 4569P-150A water resistant rope bag that will stand on its own. Large handles make it easy to carryand small pockets on the outside can be used to store carabiners and miscellaneous

hardware. Extra stiff sides prevent the bag from collapsing when feeding rope into it. Aheavy duty drawstring closure on the top keeps rope in and the weather out. Also ideal

for storing throwline, throw bags, and other equipment.

Ordering information:

Model 4569PR2-120 12" dia. x 13" h. Model 4569PR2-150 12" dia. x 16" h.

Model 4569PR2-200 12" dia. x 20" h. Model 4569PR2-225 12" dia. x 24" h.

Model 4569PR2-250 12" dia. x 26" h.• Also available without pockets (drop letter "P").

Model 45691R2-150

All Buckingham Rope Bags Are Available With A Durable Rubber Bottom

Some of the Advantages of the New Rubber Bottom are:• The rubber bottom helps keep the form of the bag which aids in

feeding rope into it.• The rubber gliders keep the bag off the ground preventing

moisture from seeping in through the bottom.

Any Buckingham Rope Bag may be ordered with a rubber bottom byadding the Number “1” for the fifth digit (i.e. 45691PR2-150 = 1/2"

Rope Bag’ 150' Red Tuff Duck with pockets and rubber bottom).

EQUIPMENT & ROPE BAGS

At Buckingham, we feel product evolution is critical. We continually improve products based on con-sumer comments and our own research. The new features that are available on all Buckingham Rope

Bags are:• Sewn in polyethylene battens that keep bags rigid, even after years of use. Add Sufx 'S7'.

• Outside mesh pockets that make identication of contents easy. A velcro closure keeps contents

securely stored. Add Sufx 'P3'.

Model 4569B1P3S7-150

Buckingham Canvas Products are available in the following colors and materials: 1.) Cordura: blue (B1), red (R2), yellow

(Y2), orange (O), green (G5), black (B4), purple (P1). 2.) Mesh: green mesh (G1), black mesh (B8). 3.) Vinyl coated nylon

TNX: black (B3), blue (B5), green (G2), orange (O1), red (R3), yellow (Y).

45400G1-1845400G1-9 4561G1


41333O1R5W1Rubber Bottom Tool Bag with Wheels

Some of the advantages are:

• Ideal for transporting equipment between trucks or to remote work sites.• Heavy-duty rubber wheels designed for years of use.

• Push button handle retracts when not in use.• Wheels can be manufactured with any 11" wide by 24" long rubber bottom tool bag by add-

ing Sufx ‘W1’. IE. Model 4133301R5SW1.

These Mesh Bags make it easy to locate carabiners and small accessories.No longer will you have to open every bag to nd the right equipment.Mesh material also allows sufcient airow throught the bag,

which aids in drying wet gear. Available in many different sizes

and styles.

Ordering information:

Model # Diameter x Length

45400G1

45400G1-9

45400G1-12

45400G1-24

45400G1-30

4560G1

4561G1

9 1/2” x 18”

8” x 12”

5” x 9”

9 1/2” x 12”

9 1/2” x 30”

9 1/2” x 24”

8” x 10”

Model 4569G5P-120




A bag designed especially for throw lines. Ideal for people who

carry multiple throw lines. Features include:• Four 5 1/2" x 7" inside mesh pockets that can be used to store

throw bags tied to the running end of throw line.

• Four 1 1/2" steel rings above pockets used to tie off the workingend of throw line.

• Five outside mesh pockets makes identication of contentseasy.

• All pockets have a velcro closure to keep contents in. A web

loop makes opening pockets easy.• An easy to use fairlead drawstring closure system.

• Poly battens keep bag rigid.• Measures 12" diameter x 12" high.

• Available in a variety of colors.Model 4566R2

Throw Line Bags

Model 4468P1 is the new PROSERIES throw line deploy-

ment bag that allows the user to conveniently store multiplethrow lines in one bag without tangling. Measures 9”H x 12”D

[22.9cm x 30.5cm]. Features include:• 3 outside pleated mesh pockets with Velcro® closures to

secure contents and allow for easy identication.

• 4 inside mesh pockets for easy throw bag storage.• 4 inside oating Dee rings for tying off throwlines.

• An outside 2.5” x 4.5” [6.4cm x 11.4cm] clear pocket forlabeling contents.

• Sewn in PVC ring to keep the top of the bag open.

Model 42A poly bottom designed to be usedwith throw line bags. Keeps the bot-

tom of the bag rigid and its formededge keeps throw lines in place.

Model 4467B1 [9”H x12”D]A quality throw line deployment

bag that’s economically priced! 3

outside mesh pockets and 4 oat-ing dee rings inside.

Throw Line Deployment Bags

Buckingham Canvas Products are available in the following colors and materials: 1.) Cordura: blue (B1), red (R2), yellow

(Y2), orange (O), green (G5), black (B4), purple (P1). 2.) Mesh: green mesh (G1), black mesh (B8). 3.) Vinyl coated nylon

TNX: black (B3), blue (B5), green (G2), orange (O1), red (R3), yellow (Y).

45605Y-6The Mini Storage Mug is ideal for

storing throwline or other miscel-

laneous equipment. It is con-structed of 1000 Denier Corduraand has a molded plastic bottom

for added durability. A 1/8" steelring is ideal for attachment to

a climbing saddle. A draw-

string closure keeps equipmentsecurely stowed. A web loop on

the inside can be used to tie off throwlines. Measures 5"diameter x 6" high.


Model 4469B1-150 Back Pack

Rope Bag makes carrying a sec-ond climbing line, rigging line or

miscellaneous equipment alofteasy. Padded shoulder straps addto the comfort. The chest strap

keeps shoulder straps in placewhile climbing. Three outside mesh

pockets with velcro closures can be

used to store miscellaneous equip-ment. Includes quick adjust friction

buckles, elastic strap retainers, fair-lead drawstring closure system, poly battens and a carry handle.

Available in 120', 150', 200', 225 ', & 300'

EQUIPMENT BAGS & ROPE BAGS



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


Buck Frisbee 44R1 & 44R2The Buck Frisbee is ideal

for separating multiple throw

lines in the throw line de-ployment bag. The edge of

sewn in rope helps keep thethrow line in place. Model

44R2 has a slotted pocket

for storing a throw bag. 101/2" diameter.

Model 4561: A throwline storage bag that is a

convenient way to store line

without tangles. Simply feedyour throwline into the bag

and pull the drawstring clo-sure tight. The line can be

deployed straight from thebag into the tree. A 1 1/8"

steel ring is sewn onto the

bag so it can be clipped toa saddle and taken into the

tree.Model 4560 8" diameter x 12" high

Model 4561 8" diameter x 10" high

Model 44R2

Model 44R1

The Fairlead Equipment Storage BagThe Fairlead Equipment Storage Bag features an

easy to use fairlead closure system that can easily beopened and closed with one hand. A positive lock-

ing "pop lock" clip keeps expensive items such ascameras, cell phones, and pagers securely stored

while working aloft. Three attachment snaps and steeldee ring make it compatible with any climbing saddle.

Measures 9"L x 10"H x 3"W

Model 45703P1

First Aid Blood Stopper PouchThe First Aid Blood Stopper Pouch quickly attaches to any Buckingham

saddle and contains one large blood stopper to control bleeding until the vic-tim can be administered First Aid on the ground. Secures to any saddle using

either an attachment snap or ¾” steel dee ring. Measures 3 ½” W X 5 ½” H

Model 4600S3Y First Aid Blood Stopper Pouch w/ Attachment SnapModel 4600D1Y First Aid Blood Stopper Pouch w/ ¾” Steel Dee Ring

Model 4600NY First Aid Blood Stopper Pouch w/ 1 ¾” Nylon Belt Loop 1 Large Blood Stopper Included with each Kit

Model 45702P1S2

Miscellaneous Bags & Accessories

SADDLE ACCESSORIES

Equipment Storage PouchThe Equipment Storage Pouch quickly attaches to your Buckingham Deluxe Series, Glideor Arborlite saddles allowing you to safely store equipment such as web and rope slings,

rigging or cabling equipment, water bottles, or miscellaneous tools while working aloft. Anelastic retainer prevents equipment from falling out while allowing easy access into the bag.

Uses two attachment snaps. Also available with one ¾” steel dee ring to secure to anyother Buckingham saddle.

Measures 9” L X 10” H X 3” W

Model 45702P1S2 Equipment Storage Pouch – Two Attachment Snaps

Model 45702D1P1 Equipment Storage Pouch – 3/4” Steel Dee Ring

Throw Line Bags




Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


NOTES






BUCKINGHAM PROMOTIONAL PRODUCTS

Shirt 1

A long sleeved green shirt that features a larger

Buckingham logo on back and a smaller logo on

front. Also features Buckingham on the sleeve.

Available in S, M, L, XL & 2X.

Shirt 2

Green Buckingham T-shirt that features the big

Buckingham logo on the back and a small logo

on front. Available in S, M, L, XL & 2X.

Shirt 3 comes in green with a navy collar.

Shirt 4 comes in white with a green collar.

Both shirts feature the Buckingham logo on front.


Shirt 3

Shirt 4Shirt 5

A denim button up shirt that features the

Buckingham logo on the front.

Available in S, M, L, and XL.




Shirt 7

BuckMan long sleeved shirt. Features Climb

Safe With Buck on back and the Buckingham

logo on the front. Also features Buckingham on

sleeve. Available in S, M, L, XL & 2X.

Shirt 6

BuckMan short sleeved T-Shirt. Features Climb

Safe With Buck on back and the Buckingham

logo on front.


5555CT

A green carhartt zip up jacket with two front pockets. Features the Buckingham logo on the

front. Available in S, M, L, XL & 2X.

1

Green Buckingham hat that features the

Buckingham logo on the front and Climber's

Choice on the back. One size ts all.


1C

New camouage hat that features the

Buckingham logo on the front and Climber's

choice on the back. One size ts all.

N E W




NOTES

5296

A black leather

portfolio that featuresa pocket for business

cards. Measures

10" x 12".

1231 & 1230

Can be used for connectors, nuts and other

small items. Also can be set on a desk or

hung in a vehicle for other uses. Great forsafety awards

5295-BL

The Buck satchel features a spring loaded

closure and measures 10 1/2" diameter x 16" length.

Comes in brown, burgundy and black.

5005NK

A Non-locking key chain

carabiner. Length 3",opening 5" and breaking

strength is not rated. Not intended for human

support.

4004

A Buckingham key chain featuring the

Buckingham logo.


12301231



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


INDEXP1 Ergovation® Accessories 6,33P2 Ergovation® Accessories 6,33P7J2-10-33 Eye to Eye Tail 46P7J6-10-24 Eye to Eye Tail 46P7J6-10-34 Eye to Eye Tail 46P7J6-10-40 Eye to Eye Tail 46P7J6-+2-24 Eye to Eye Tail 47P7J8A-V-26 Eye to Eye Tail 46P7J8A-10-26 Eye to Eye Tail 46P9J8P-10-26 Eye to Eye Tail 46P9J8P-10-30 Eye to Eye Tail 46REH1 Ergovation Y Retro Harness 32

REH2 Ergovation H Retro Harness 32RP104 Pulleys & Slings 55RP110 Split Tail & Micro Pulley 48RP130 Rigging Blocks 53R03X6G9 Harness 40R396G9 Harness 40SB9205A Climbers 20SB92059A Climbers 20SB9208A Climbers 20SB92089A Climbers 20SB9305 Climbers 18SB93059 Climbers 18SB9308 Climbers 18SB93089 Climbers 18SB9405A Climbers 20SB94059A Climbers 20SB9408A Climbers 20SB94089A Climbers 20

SB9505 Climbers 18SB95059 Climbers 18SB9508 Climbers 18SB95089 Climbers 18SB97089 Climbers 18,19SB96089A Climbers 20Shirt 1 Buckingham Long Sleeve Shirt 86Shirt 2 Buckingham Tee Shirt 86Shirt 3 Green Polo Tee Shirt 86Shirt 4 White Polo Tee Shirt 86Shirt 5 Denim Shirt 86Shirt 6 BuckMan Tee Shirt 87Shirt 7 BuckMan Long Sleeve Shirt 87T9106A Climber Gaff 14T9205A Climbers 19T92059A Climbers 19T9206A Climber Gaff 14T9208A Climbers 19

T92089A Climbers 19T9405A Climbers 19T94059A Climbers 19T9408A Climbers 19T94089A Climbers 19TB8105 Climbers 19TB81059 Climbers 19TB8142R Climbers 17TB81429R Climbers 17TB8646 Climbers 19TB86469 Climbers 19TB8747 Climbers 19TB87479 Climbers 19TB9005A Climbers 19TB90059A Climbers 19TB9008A Climbers 19TB90089A Climbers 19TB9105A Climbers 19TB91059A Climbers 19TB9108A Climbers 19TB91089A Climbers 19TB91428R Climbers 17TB91429R Climbers 17TB9205A Climbers 19TB92059A Climbers 19TB9208A Climbers 19TB92089A Climbers 19TB9305 Climbers 17TB93059 Climbers 17TB9306 Climber Gaff 14TB9308 Climbers 17TB93089 Climbers 17TB9405A Climbers 19TB94059A Climbers 19

TB9408A Climbers 19TB94089A Climbers 19TB9505 Climbers 17TB95059 Climbers 17TB9508 Climbers 17TB95089 Climbers 17 TB9646 Climbers 19TB96469 Climbers 19TB97089 Climbers 17 TB9847 Climbers 19TB98479 Climbers 19 U6261 Saddle Accessories 40

WES Ergovation® Suspension 6,33WES1 Ergovation® SRT Bridge 6,33WE1 Ergovation® Bridge 6,33WE2 Ergovation® Bridge 6,33WE3 Ergovation® Bridge 6,33WE8 Ergovation® Bridge 6,33WE9 Ergovation® Bridge 6,331 Buckingham Hat 871C Buckingham Camouage Hat 87 10 Climber Accessories 25101SR-50 Bucket Truck & Misc. Acc. 66101SR-75 Bucket Truck & Misc. Acc. 66101SR-100 Bucket Truck & Misc. Acc. 661027 Big Shot 431027H Big Shot 431027S Big Shot 431028H Big Shot 43106-50 Bucket Truck Rescue Systems 65

108-95 Bucket Truck & Misc. Acc. 6611 Climbers 1411T Replacement Gaff Screws 1411215 Bucket Truck & Misc. Acc. 7111217 Bucket Truck & Misc. Acc. 7111290 Arbormaster® Deluxe Saddle 3911291 Arbormaster® Deluxe Saddle 3911291T Arbormaster® Deluxe Saddle 3911292 Arbormaster® Deluxe Saddle 3911292T Arbormaster® Deluxe Saddle 3911293 Arbormaster® Deluxe Saddle 3911293T Arbormaster® Deluxe Saddle 391215 Bucket Truck & Misc. Acc. 7112161 Bucket Truck & Misc. Acc. 71121615CH1L Bucket Truck & Misc. Acc. 7112162 Bucket Truck & Misc. Acc. 7112163 Bucket Truck & Misc. Acc. 711217 Bucket Truck & Misc. Acc. 71

12290 Arbormaster® Deluxe Saddle 3912291 Arbormaster® Deluxe Saddle 3912292 Arbormaster® Deluxe Saddle 3912293 Arbormaster® Deluxe Saddle 391290 Arbormaster® Classic Saddle 371291 Arbormaster® Classic Saddle 371291T Arbormaster® Classic Saddle 371292 Arbormaster® Classic Saddle 381292T Arbormaster® Classic Saddle 381293 Arbormaster® Classic Saddle 381293T Arbormaster® Classic Saddle 381299 Saddle Accessories 40130014R Saddles 36130014S Saddles 361300010G Ergovation® Accessories 6,331337 Saddles 341339 Saddles 341340 Saddles 3613401 Saddles 361341 Saddles 361342 Saddles 361349 Saddles 3513491 Saddles 3513494 Saddles 351350 Saddles 3613655 Saddles 3413665 Saddles 341368 Saddles 331371 Saddles 7,341372 Saddles 361373 Saddles 361375 Saddles 351376 Saddles 351377 Saddles 37

1378 Saddles 371379 Saddles 351380 Saddles 7,341381 Saddles 351383 Saddles 3514 Climber Accessories 1415908 Black Widow Saddle 3716A1-16G Throwbags 4316A1-16O Throwbags 4316-10Y Throwbags 4316-14G Throwbags 4316-16O Throwbags 43

16902W1 Saddles 3816902W2 Saddles 3816903W1 Glide Lite Saddles 3816906 Ergovation® Tree Saddle 31,32169062 Ergovation® Tree Saddle 6,32169064 Ergovation® Tree Saddle 6,3217C Slickline 4317Z1 Throwline 4317Z2 Throwline 4317051 Rope Snaps w/ 3600 lb gate 61706 Rope Snaps 61709 Rope Snaps 61710 Rope Snaps 61712 Rope Snaps 617-100 Slickline 4317-150 Slickline 4317-200 Slickline 4317-250 Slickline 43

1987 Miscellaneous Equipment 720 Saddle Accessories 402022 Aerial Belt 632134 Climber Straps 2621341 Climber Straps 262135 Climber Straps 2621351 Climber Straps 2621359 Climber Straps 262139 Climber Straps 2621391 Climber Straps 262234 Climber Straps 262235 Climber Straps 2622359 Climber Straps 262239 Climber Straps 2624S-7 Fliplines 482401 Bucket Truck & Misc. Acc. 72403 Bucket Truck & Misc. Acc. 72434 Climber Straps 26

2435 Climber Straps 2624359 Climber Straps 262439 Climber Straps 2624399 Climber Straps 262444 Climber Straps 262445 Climber Straps 262449 Climber Straps 2625Y12-46A Chainsaw Lanyards/Acc Straps 52251B1 Split Tail & Micro Pulley 4826309 Climber Straps 262634 Climber Straps 26263432 Climber Straps 262635 Climber Straps 2626359 Climber Straps 262639 Climber Straps 2626399 Climber Straps 262644 Climber Straps 262645 Climber Straps 262649 Climber Straps 2628344 Climber Straps 2628354 Climber Straps 2628359 Climber Straps 262839 Climber Straps 2628399 Climber Straps 262844 Climber Straps 2628454 Climber Straps 262849 Climber Straps 263032L Rope Snaps 630399 Climber Straps 263049 Climber Straps 263118 Climber Pads 223119 Climber Pads 223120 Climber Pads 243122 Climber Pads 24

Cat. No. Description Pg. Cat. No. Description Pg. Cat. No. Description Pg




Cat. No. Description Pg. Cat. No. Description Pg. Cat. No. Description Pg.

3124 Climber Pads 243125 Climber Pads 243126 Climber Pads 243127 Climber Pads 243128 Climber Accessories 253129 Rope Snaps 613130 Rope Snaps 613201 Climber Pads 243202C Climber Pads 7,22341 Saddle Accessories 40342 Saddle Accessories 40344299E Positioning Strap 49

346099E Positioning Strap 49346699E Positioning Strap 49347099E Positioning Strap 49348099E Positioning Strap 493500 Climber Pads 233500C Climber Pads 233502 Climber Pads 233502C Climber Pads 233502CKL Climber Pads 233502KL Climber Pads 233503 Climber Pads 233503C Climber Pads 2335032 Climber Pads 2435032KL Climber Pads 2435033 Climber Accessories 2535034 Climber Pads 2435034KL Climber Pads 243504 Climber Pads 23

3504C Climber Pads 233504CKL Climber Pads 233504KL Climber Pads 23350408 Thimbles 61350409 Thimbles 61350410 Thimbles 61350411 Thimbles 61355B Miscellaneous Equipment 68355BT Miscellaneous Equipment 68355T Miscellaneous Equipment 6838STB Split Tail 4638STG Split Tail 4638STO Split Tail 4638STW Split Tail 4638STY Split Tail 463808 Aerial Belts 6338084 Aerial Belts 633809R Bucket Truck & Misc. Acc. 66

3813 Bucket Truck & Misc. Acc. 663813D1 Bucket Truck & Misc. Acc. 66384299E Positioning Straps 493852 Aerial Belts 6338526 Aerial Belts 63386099E Positioning Straps 49386699E Positioning Straps 49387099E Positioning Straps 49388099E Positioning Straps 4939SAM9-12 Split Tail & Mirco Pulley 4839ST8P Split Tail 463905-24 Slings & Pulleys 553905-36 Slings & Pulleys 553905E-18 Slings & Pulleys 5539074S Slings & Pulleys 5539074T Slings & Pulleys 5539074TA-6 Slings & Pulleys 5539074TA-8 Slings & Pulleys 5539074TA-10 Slings & Pulleys 5539078S Slings & Pulleys 5539078T Slings & Pulleys 5539078TA-6 Slings & Pulleys 5539078TA-8 Slings & Pulleys 5539078TA-10 Slings & Pulleys 554004 Buckingham Key Chain 884061 Miscellaneous Equipment 764076 Miscellaneous Equipment 7641333 Equipment & Rope Bags 804133301R5W1 Equipment & Rope Bags 8142 Throwline Bags 824369B3 Equipment & Rope Bags 7,8044R1 Throwline Bags 8344R2 Throwline Bags 834467B1 Throwline Bags 82

4468P1 Throwline Bags 824469B1-150 Equipment & Rope Bags 824510 Bucket Truck & Misc. Acc. 694512 Bucket Truck & Misc. Acc. 694514 Bucket Truck & Misc. Acc. 6945141W Bucket Truck & Misc. Acc. 694514W Bucket Truck & Misc. Acc. 694530R Bucket Truck & Misc. Acc. 6945301R Bucket Truck & Misc. Acc. 6945302 Bucket Truck & Misc. Acc. 694531R Bucket Truck & Misc. Acc. 6945311R Bucket Truck & Misc. Acc. 69

45311RC Bucket Truck & Misc. Acc. 69453112 Bucket Truck & Misc. Acc. 6945312 Bucket Truck & Misc. Acc. 694532R Bucket Truck & Misc. Acc. 6945321R Bucket Truck & Misc. Acc. 69453212 Bucket Truck & Misc. Acc. 6945322 Bucket Truck & Misc. Acc. 6945331Y Equipment & Rope Bags 8045332R5 Equipment & Rope Bags 8045333R5SY Equipment & Rope Bags 8045400 Equipment & Rope Bags 8045400G1 Equipment & Rope Bags 8145400G1-9 Equipment & Rope Bags 8145400G1-12 Equipment & Rope Bags 8145400G1-24 Equipment & Rope Bags 8145400G1-30 Equipment & Rope Bags 8145400-24 Equipment & Rope Bags 804545 Bucket Truck & Misc. Acc. 67

4545B Bucket Truck & Misc. Acc. 674545Y Bucket Truck & Misc. Acc. 6745455 Bucket Truck & Misc. Acc. 6745455B Bucket Truck & Misc. Acc. 6745455Y Bucket Truck & Misc. Acc. 674548 Bucket Truck & Misc. Acc. 674548B Bucket Truck & Misc. Acc. 674548Y Bucket Truck & Misc. Acc. 674530G1 Equipment & Rope Bags 8145605Y-6 Misc Bags & Accessories 824561G1 Equipment & Rope Bags 814566R2 Throwline Bags 824569B1P3S7-150 Equipment & Rope Bags 814569G5P-120 Equipment & Rope Bags 814569PR2-120 Equipment & Rope Bags 814569PR2-150 Equipment & Rope Bags 814569PR2-200 Equipment & Rope Bags 814569PR2-225 Equipment & Rope Bags 81

4569PR2-250 Equipment & Rope Bags 8145691R2-150 Equipment & Rope Bags 8045-700D Training Aids 445702D1P1 Misc Bags & Accessories 8345702P1S2 Misc Bags & Accessories 8345703P1 Misc Bags & Accessories 8345-707D Training Aids 445-710D Training Aids 445-717D Training Aids 445-801 Training Aids 44558 Bucket Truck & Misc. Acc. 674559 Bucket Truck & Misc. Acc. 674560 Throwline Bags 834561 Throwline Bags 834563 Bucket Truck & Misc. Acc. 6645718D Training Aids 445802 Training Aids 445803 Training Aids 445804 Training Aids 44589 Bucket Truck & Misc. Acc. 7045891 Bucket Truck & Misc. Acc. 704600D1Y Misc Bags & Accessories 834600NY Misc Bags & Accessories 834600S3Y Misc Bags & Accessories 834812Y-6 Positioning Strap 494812Y-66 Positioning Strap 494812Y-7 Positioning Strap 4948129Y-8 Positioning Strap 4948129-7 Positioning Strap 49494299E Positioning Strap 494958 Split Tail & Micro Pulley 48496099E Positioning Strap 49496699E Positioning Strap 49497099E Positioning Strap 49

498099E Positioning Strap 495VV114+Z Shock Absorbing Lanyards 605VV114.5 Shock Absorbing Lanyards 605VV116+Z Shock Absorbing Lanyards 605VV124+Z Shock Absorbing Lanyards 605VV125+Z Shock Absorbing Lanyards 605VV126+Z Shock Absorbing Lanyards 605002MB Handled Ascenders 535002MBC Handled Ascenders 535002MBO Handled Ascenders 535004B BuckGrab 455004HAO Handled Ascenders 53

5004HAS Handled Ascenders 535004SO Handled Ascenders 5350051D Carabiners 625005M Carabiners 625005NA Carabiners 625005NIA Carabiners 625005NK Carabiners 885005SA Carabiners 625005SAE Carabiners 625005T Carabiners 625006S BuckBlocks Climbing System 8,445006L BuckBlocks Climbing System 8,535007L Rigging Blocks 535007S Rigging Blocks 535009 Rope Snap 615009E Rope Snap 615032 Climber Pads 245032KL Climber Pads 24

5032S Climber Pads 245032SKL Climber Pads 245034 Bucket Truck & Misc. Acc. 715058 Bucket Truck & Misc. Acc. 71506P7-14 Equipment & Rope Bags 805295-BL Buckingham Satchel 885296 Buckingham Portfolio 885334 Bucket Truck & Misc. Acc. 715358 Bucket Truck & Misc. Acc. 7154V114+Z Shock Absorbing Lanyards 6054V114.5+Z Shock Absorbing Lanyards 6054V116+Z Shock Absorbing Lanyards 6054V126+Z Shock Absorbing Lanyards 605555CT Buckingham Jacket 8,875555SA Carabiners 625555SI Carabiners 625555WSA Carabiners 6257S-24 Friction Saver 44

57S-36 Friction Saver 4457S-48 Friction Saver 4457S-60 Friction Saver 4457S-72 Friction Saver 4457-24 Friction Saver 4457-36 Friction Saver 4457-48 Friction Saver 4457-60 Friction Saver 4457-72 Friction Saver 445919 Aerial Belts & Harnesses 636VV114+Z Shock Absorbing Lanyards 606VV114.5+Z Shock Absorbing Lanyards 606VV116+Z Shock Absorbing Lanyards 606VV1124+Z Shock Absorbing Lanyards 606VV125+Z Shock Absorbing Lanyards 606VV126+Z Shock Absorbing Lanyards 6060002 Chainsaw Lanyards/Acc Straps 5260002G Chainsaw Lanyards/Acc Straps 5260002O Chainsaw Lanyards/Acc Straps 5260002P Chainsaw Lanyards/Acc Straps 5260003 Chainsaw Lanyards/Acc Straps 5260003G Chainsaw Lanyards/Acc Straps 5260003O Chainsaw Lanyards/Acc Straps 5260003P Chainsaw Lanyards/Acc Straps 526009 Climber Accessories 2560091 Climber Accessories 2560092 Climber Accessories 2560093 Climber Accessories 25601 Port-A-Wrap & Accessories 54601BT Port-A-Wrap & Accessories 54601L Port-A-Wrap & Accessories 54601LN Port-A-Wrap & Accessories 54601M Port-A-Wrap & Accessories 54601MN Port-A-Wrap & Accessories 54



Phone: 1-800-937-BUCK (2825); Fax: 607-773-2425


Cat. No. Description Pg. Cat. No. Description Pg. Cat. No. Description Pg

601N Port-A-Wrap & Accessories 546015 Scabbards 766015C Scabbards 766016 Scabbards 756016C Scabbards 756016CS Scabbards 766016S Scabbards 766017 Misc Scabbards/Guards 776017C Misc Scabbards/Guards 776019 Misc Scabbards/Guards 776019C Misc Scabbards/Guards 77602AL Port-A-Wrap & Accessories 54

6020 Misc Scabbards/Guards 776020C Misc Scabbards/Guards 776029C Misc Scabbards/Guards 7760299 Misc Scabbards/Guards 7760299C Misc Scabbards/Guards 7760212 Scabbards 7460212C Scabbards 746022 Scabbards 746022C Scabbards 746025 Climber Accessories 276025C Climber Accessories 276027 Climber Accessories 276029 Misc Scabbards/Guards 776029C Misc Scabbards/Guards 7760299 Misc Scabbards/Guards 77603E3700R3 Aerial Belts & Harnesses 646030 Misc Scabbards/Guards 776030C Misc Scabbards/Guardss 77

6031 Misc Scabbards/Guards 776031C Misc Scabbards/Guards 776058 Climber Accessories 276150 Bucket Truck & Misc. Acc. 6761501 Bucket Truck & Misc. Acc. 6762005 Misc Scabbards/Guards 7762005C Misc Scabbards/Guards 776208 Scabbards 756208C Scabbards 756217 Misc Scabbards/Guards 776217C Misc Scabbards/Guards 776221 Scabbards 756221C Scabbards 756222 Scabbards 756222C Scabbards 756223 Scabbards 746223C Scabbards 746225-21 Misc Scabbards/Guards 77

6225-24 Misc Scabbards/Guards 776225-30 Misc Scabbards/Guards 776226 Scabbards 756226C Scabbards 756261X Saddle Accessories 406287 Miscellaneous Equipment 766303 Climber Accessories 276303C Climber Accessories 276306 Climber Accessories 2764V114+Z Shock Absorbing Lanyards 6064V114.5+Z Shock Absorbing Lanyards 6064V116+Z Shock Absorbing Lanyards 6064V126+Z Shock Absorbing Lanyards 606501 Climber Accessories 276515 Scabbards 756515C Scabbards 756515CP Scabbards 756515CS Scabbards 766515P Scabbards 756515S Scabbards 766517 Scabbards 766517C Scabbards 7668D7G8C600V9 Harnesses 6468D98C600 Harnesses 646909 Climber Accessories 256909A Gaff Guard 7,22,256909U Climber Accessories 25694 Bucket Truck & Misc. Acc. 70694F1 Bucket Truck & Misc. Acc. 707+N+N8B110 Fliplines 477VV112 Web Lanyards 637VV124 Rope & Web Lanyards 457VV126 Rope & Web Lanyards 457VV2A110J Fliplines 47

7VV212 Rope & Web Lanyard 457VV214 Rope & Web Lanyard 457VV216 Rope & Web Lanyard 457VV226 Rope & Web Lanyard 457VV227 Rope & Web Lanyard 457VV326 Rope & Web Lanyard 457VV526 Rope & Web Lanyard 45704A1 Friction Saver 47704S1 Friction Saver 478VV114+Z Shock Absorbing Lanyards 598VV114.5+Z Shock Absorbing Lanyards 598VV116+Z Shock Absorbing Lanyards 59

8VV714+Z Shock Absorbing Lanyards 598VV714.5+Z Shock Absorbing Lanyards 598VV716+Z Shock Absorbing Lanyards 598005 Climbers 2080059 Climbers 208105 Climbers 2081059 Climbers 208142 Climbers 188142R Climbers 1881429 Climbers 2081429R Climbers 208747 Climbers 2087479 Climbers 2084V116+Z Shock Absorbing Lanyards 5984V716+Z Shock Absorbing Lanyards 599VV8K110J Fliplines 479V08B110M4 Work Positioning Lanyards 459V08C110M4 Work Positioning Lanyards 45

9V08D114M4 Work Positioning Lanyards 459V08K16M4 Work Positioning Lanyards 4590078 Climbers 2090079 Climbers 209106 Climber Gaff 1491078 Climbers 2091079 Climbers 2091428 Climbers 1891428R Climbers 1891429 Climbers 1891429NR Climbers 18,2091429R Climbers 189202 Climber Accessories 279204 Climber Accessories 279206 Climber Gaff 149215 Climber Accessories 279218 Climber Accessories 279306 Climber Gaff 14

9847 Climbers 2098479 Climbers 20996 Climber Accessories 27



Documents

Buck 2010 Catalog