BS Quick Guide

DD IEC TS 62282 ................................................19PD CR R210 ..................................................19, 24PD CLC/TR 50485 .........................................19, 24

EngineeringBS 4656 ..............................................................22BS 5660 ..............................................................23BS 5661 ..............................................................23BS 5662 ..............................................................23BS 6200 ........................................................10, 23BS 6590 ..............................................................22BS 7140 ..............................................................25DD CEN/TS 12977 ..............................................19BS EN ISO 439 ..............................................10, 23BS EN 999 ....................................................14, 23BS EN ISO 1179 ..................................................20BS EN 1374 ........................................................21BS EN 2240 ........................................................11BS EN ISO 2739 ..................................................11BS EN ISO 3369 ............................................11, 24BS EN 3459 ..................................................11, 24BS EN 3660 ........................................................11BS EN ISO 3738 ..................................................11BS EN ISO 3923 ............................................11, 24BS EN 4622 ........................................................12BS EN 4623 ........................................................12BS EN 4624 ........................................................12BS EN 4632 ........................................................12BS EN 4637 ........................................................12BS EN 4638 ........................................................12BS EN 6049 ........................................................12BS EN 6059 ........................................................12BS EN ISO 6520 ..................................................25BS EN ISO 7284 ..................................................24BS EN ISO 8748 ..................................................26BS EN ISO 8750 ..................................................26BS EN ISO 8751 ..................................................26BS EN ISO 10426 ................................................20BS EN 12044 ......................................................21BS EN 12351 ......................................................14BS EN 12852 ......................................................21BS EN 12853 ......................................................21BS EN 13129 ......................................................27BS EN 13621 ......................................................21BS EN 13675 ......................................................21BS EN 13775 ......................................................27BS EN ISO 13855 ..........................................14, 23BS EN 13886 ......................................................21BS EN 14067 ......................................................27BS EN ISO 14344 ................................................14BS EN 14363 ......................................................27BS EN ISO 14577 ................................................27BS EN 14656 ......................................................21BS EN 14673 ......................................................21BS EN 14681 ......................................................21BS EN 15016 ......................................................28BS EN 15273 ......................................................14BS EN 15313 ......................................................14BS EN ISO 15351 ................................................14BS EN 15500 ......................................................20BS EN ISO 15614 ................................................28BS EN 15746 ......................................................15BS EN 23369 ................................................11, 24BS EN 23923 ................................................11, 24BS EN 60204 ......................................................20BS EN 62061 ......................................................20BS ISO 230 .........................................................28BS ISO 3116 .......................................................28BS ISO 3739 .......................................................28BS ISO 4000 .......................................................28BS ISO 4037 .......................................................28BS ISO 4254 .......................................................18BS ISO 8529 .......................................................28BS ISO 8568 .......................................................29BS ISO 9459 .......................................................29BS ISO 10275 .....................................................29

DD ISO/TS 21872 ................................................30PD CEN/TR 16015 ...............................................19PD CLC/TR 50531 ...............................................19

ElectrotechnicalBS 2618 ..............................................................23BS 5772 ..............................................................16BS 7001 ..............................................................22BS 8431 ........................................................10, 23DD 8431 .......................................................10, 23BS EN ISO 8729 ............................................18, 24BS EN 15876 ......................................................15BS EN ISO 24014 ................................................28BS EN 50085 ................................................15, 24BS EN 50241 ................................................16, 24BS EN 50342 ......................................................24BS EN 50377 ......................................................15BS EN 50527 ......................................................15BS EN 50530 ......................................................15BS EN 50532 ......................................................15BS EN 50540 ......................................................16BS EN 60034 ......................................................16BS EN 60079 ................................................16, 24BS EN 60095 ......................................................24BS EN 60297 ......................................................16BS EN 60317 ................................................16, 21BS EN 60335 ................................................16, 21BS EN 60512 ......................................................16BS EN 60534 ......................................................16BS EN 60603 ......................................................16BS EN 60691 ......................................................21BS EN 60704 ......................................................16BS EN 60730 ................................................16, 21BS EN 60825 ......................................................21BS EN 60917 ......................................................16BS EN 60947 ................................................16, 24BS EN 60958 ......................................................21BS EN 61000 ......................................................22BS EN 61003 ......................................................17BS EN 61029 ......................................................17BS EN 61111 ................................................17, 24BS EN 61112 ................................................17, 24BS EN 61191 ......................................................17BS EN 61249 ......................................................17BS EN 61280 ......................................................17BS EN 61347 ......................................................22BS EN 61760 ......................................................17BS EN 61977 ......................................................17BS EN 62110 ......................................................17BS EN 62192 ......................................................17BS EN 62282 ......................................................17BS EN 62341 ................................................18, 20BS EN 62417 ......................................................17BS EN 62424 ......................................................17BS EN 62489 ......................................................18BS EN 62496 ......................................................18BS EN 62576 ......................................................18BS ISO 8729 .................................................18, 24BS ISO 20672 .....................................................29BS ISO 20673 .....................................................29BS ISO 24531 .....................................................30BS IEC 61111 ...............................................17, 24BS IEC 61112 ...............................................17, 24BS IEC 61691 ......................................................24BS IEC 62050 ......................................................24BS IEC 62142 ......................................................24BS IEC 62265 ......................................................24BS IEC 62341 ......................................................18BS IEC 62526 ......................................................30BS IEC 62528 ......................................................30DD IEC/PAS 61076 ..............................................19DD IEC/PAS 61169 ..............................................19DD CLC/TS 50534 ...............................................19DD CLC/TS 50535 ...............................................19DD CLC/TS 50539 ...............................................19DD IEC/TS 62282 ................................................19

The following British Standards are listed orreferred to in this issue of Update Standardswith the exception of those in ‘New WorkStarted’.

Building and civil engineeringBS 3318 ..............................................................24BS 5589 ..............................................................23BS 5911 .................................................10, 20, 21BS 6074 ..............................................................25BS 6113 ..............................................................25BS 6911 ..............................................................25BS EN 622 ..........................................................10BS EN 1058 ........................................................10BS EN 1906 ........................................................11BS EN 1912 ........................................................21BS EN ISO 11058 ................................................12BS EN ISO 12956 ................................................14BS EN ISO 12958 ................................................14BS EN 14023 ......................................................14BS ISO 12006 .....................................................29NA to BS EN 1999 ..............................................20

Consumer products and servicesBS 4317 ........................................................12, 23BS 4585 ........................................................12, 23BS 4875 ........................................................14, 23BS 5550 ..............................................................22BS 5586 ..............................................................24BS 5763 ..............................................................26BS EN 209 ..........................................................25BS EN 210 ..........................................................25BS EN 862 ..........................................................25BS EN 920 ..........................................................22BS EN 1104 ........................................................22BS EN ISO 5529 ............................................18, 20BS EN ISO 6540 ............................................12, 23BS EN ISO 7541 ............................................12, 23BS EN ISO 8062 ..................................................26BS EN ISO 8936 ..................................................26BS EN ISO 11290 ................................................26BS EN 12377 ......................................................26BS EN 12497 ......................................................22BS EN 12498 ......................................................22BS EN 12520 ..........................................14, 23, 24BS EN 12674 ......................................................26BS EN 12708 ......................................................26BS EN 12709 ......................................................26BS EN 12711 ......................................................26BS EN 12712 ......................................................27BS EN 12713 ......................................................27BS EN 12726 ......................................................27BS EN 12928 ......................................................27BS EN 13007 ......................................................27BS EN 13008 ......................................................27BS EN 13025 ......................................................27BS EN 13046 ......................................................27BS EN 13047 ......................................................27BS EN 13117 ......................................................27BS EN 13199 ......................................................27BS EN 14798 ......................................................27BS EN 14847 ......................................................27BS EN 14848 ......................................................27BS EN 14849 ......................................................28BS EN 14850 ......................................................28BS EN 14854 ......................................................28BS EN 14867 ......................................................28BS EN 14887 ......................................................28BS EN ISO 25178 ................................................15DD ENV 12520 .............................................14, 24BS ISO 5529 .......................................................18BS ISO 10110 .....................................................29BS ISO 15519 .....................................................18BS ISO 16883 .....................................................29BS ISO 20473 .....................................................29

British Standards - Quick Reference Guide

4 Update Standards Jul 2010Prices may be subject to change.

BS EN 12455 ......................................................26BS EN 12485 ......................................................14BS EN ISO 12625 ................................................22BS EN 12748 ................................................15, 24BS EN 13245 ......................................................20BS EN 13523 ......................................................14BS EN 13845 ......................................................27BS EN 14085 ......................................................14BS EN 14304 ......................................................14BS EN 14307 ......................................................14BS EN 14308 ......................................................14BS EN 14309 ......................................................14BS EN 14314 ......................................................14BS EN 14397 ......................................................14BS EN 14521 ......................................................27BS EN 14565 ......................................................27BS EN 14719 ......................................................22BS EN 14900 ......................................................28BS EN 15619 ......................................................21BS EN 15705 ................................................15, 24BS EN ISO 15755 ................................................22BS EN 15771 ......................................................15BS EN 15825 ......................................................15BS EN 20535 ......................................................23BS EN ISO 20743 ................................................28BS EN ISO 20869 ..........................................15, 24BS EN 23270 ......................................................23BS EN 27213 ......................................................23BS ISO 1088 .......................................................28BS ISO 2537 .......................................................28BS ISO 2834 .......................................................28BS ISO 2846 .......................................................28BS ISO 3455 .......................................................28BS ISO 4366 .......................................................28BS ISO 4662 .......................................................20BS ISO 12640 .....................................................29BS ISO 13656 .....................................................29BS ISO 15472 .....................................................18BS ISO 15769 .....................................................18BS ISO/TS 15769 .................................................18BS ISO 15901 .....................................................29BS ISO 17455 .....................................................20BS ISO 21501 .....................................................29BS ISO 22621 .....................................................18BS ISO 22891 .....................................................30DD ISO/TS 80004 ................................................20PD ISO/TR 12134 ................................................19

Alpha-numeric sequence of BritishStandards quoted in this issueBS 2618 ..............................................................23BS 3318 ..............................................................24BS 3900 ........................................................10, 23BS 4317 ........................................................12, 23BS 4585 ........................................................12, 23BS 4656 ..............................................................22BS 4875 ........................................................14, 23BS 5550 ..............................................................22BS 5586 ..............................................................24BS 5589 ..............................................................23BS 5660 ..............................................................23BS 5661 ..............................................................23BS 5662 ..............................................................23BS 5724 ..............................................................16BS 5760 ..............................................................10BS 5763 ..............................................................26BS 5772 ..............................................................16BS 5911 .................................................10, 20, 21BS 6058 ..............................................................16BS 6068 ...........................................24, 25, 26, 28BS 6074 ..............................................................25BS 6113 ..............................................................25BS 6200 ........................................................10, 23BS 6590 ..............................................................22BS 6911 ..............................................................25

PD ISO/TR 9241 ..................................................19PD IEC/TR 80002 ................................................19

Information systemsBS EN 50491 ......................................................15BS EN 62439 ..........................................17, 18, 24BS ISO 9230 .......................................................29BS ISO/IEC 14662 ...............................................18BS ISO/IEC 14763 ...............................................22BS ISO/IEC 18014 ...............................................18BS ISO/IEC 18033 ...............................................22BS ISO/IEC 19501 ...............................................29BS ISO/IEC 19785 ...............................................22BS ISO/IEC 19794 ...............................................22BS ISO/IEC 24730 ...............................................18BS ISO/IEC 27002 ...............................................30BS ISO/IEC 29109 ...............................................19PD ISO/IEC TR 15443 ..........................................29PD ISO/IEC TR 15944 ..........................................19PD ISO/IEC TR 18047 ..........................................20PD ISO/IEC TR 20000 ..........................................19

Management systemsBS 5760 ..............................................................10BS EN ISO/IEC 17025 ..........................................28BS EN ISO/IEC 17050 ..........................................15BS EN 15838 ......................................................15BS EN 31010 ......................................................15BS ISO 11843 .....................................................29BS ISO 14065 .....................................................29BS ISO 80000 .....................................................30

Materials and chemicalsBS 3900 ........................................................10, 23BS 7079 ..............................................................23DD CEN/TS 14243 ..............................................19DD CEN/TS 15705 ........................................15, 24BS EN ISO 105 ....................................................10BS EN 426 ..........................................................25BS EN 427 ..........................................................25BS EN 428 ..........................................................25BS EN 429 ..........................................................25BS EN 430 ..........................................................25BS EN 431 ..........................................................25BS EN 432 ..........................................................25BS EN 433 ..........................................................25BS EN 434 ..........................................................25BS EN 435 ..........................................................25BS EN 436 ..........................................................25BS EN 661 ..........................................................25BS EN 662 ..........................................................25BS EN 663 ..........................................................25BS EN 664 ..........................................................25BS EN 665 ..........................................................25BS EN 666 ..........................................................25BS EN 986 ..........................................................25BS EN 1081 ........................................................25BS EN 1318 ........................................................25BS EN 1464 ..................................................11, 23BS EN 1814 ........................................................25BS EN 1815 ........................................................25BS EN 1818 ........................................................25BS EN 1967 ..................................................11, 23BS EN ISO 3386 ..................................................21BS EN ISO 5267 ..................................................22BS EN ISO 5270 ..................................................22BS EN ISO 6326 ..................................................25BS EN ISO 8502 ..................................................23BS EN ISO 9073 ..................................................26BS EN ISO 11339 ................................................12BS EN ISO 11890 ................................................26BS EN 12103 ......................................................26BS EN 12104 ......................................................26BS EN 12105 ......................................................26

BS ISO 15396 .....................................................29BS ISO 16528 .....................................................29BS ISO 19933 .....................................................29BS ISO 21238 .....................................................29BS ISO 21348 .....................................................29BS ISO 27306 .....................................................19BS 2S 510 ...........................................................23BS 2S 511 ...........................................................23BS 2S 514 ...........................................................23BS 2TA 57 ...........................................................24BS TA 57 .......................................................11, 24

Health and environmentBS 5724 ..............................................................16BS 6058 ..............................................................16BS 6068 ...........................................24, 25, 26, 28BS 8550 ..............................................................10BS EN 54 ............................................................10BS EN ISO 1135 ..................................................10BS EN 1276 ........................................................10BS EN 1366 ........................................................11BS EN 1846 ........................................................11BS EN 1970 ........................................................16BS EN ISO 3743 ..................................................11BS EN ISO 4871 ..................................................12BS EN ISO 7346 ..................................................25BS EN ISO 7396 ..................................................26BS EN ISO 7899 ..................................................26BS EN ISO 8185 ..................................................26BS EN ISO 9185 ..................................................26BS EN ISO 9241 ..................................................26BS EN ISO 9308 ..................................................26BS EN ISO 9377 ..................................................26BS EN ISO 9680 ..................................................26BS EN ISO 9917 ..................................................12BS EN ISO 9920 ..................................................26BS EN ISO 10695 ................................................26BS EN ISO 10705 ................................................26BS EN ISO 10993 ..........................................12, 26BS EN ISO 11064 ................................................26BS EN ISO 11201 ................................................12BS EN ISO 11499 ................................................26BS EN ISO 11546 ................................................12BS EN ISO 11688 ................................................12BS EN ISO 11691 ................................................12BS EN ISO 12001 ................................................12BS EN ISO 13295 ................................................27BS EN 13381 ......................................................14BS EN ISO 14602 ................................................14BS EN ISO 15025 ................................................28BS EN ISO 15682 ................................................28BS EN ISO 15747 ................................................15BS EN 15859 ......................................................15BS EN ISO 15913 ................................................28BS EN ISO 16000 ................................................23BS EN ISO 19493 ................................................28BS EN ISO 20776 ................................................28BS EN ISO 21606 ................................................28BS EN 26461 ......................................................28BS EN 60601 ......................................................16BS EN 60613 ......................................................16BS EN 62563 ......................................................18BS EN ISO 80000 ................................................28BS ISO 7176 .......................................................28BS ISO 10294 .....................................................29BS ISO 10295 .....................................................29BS ISO 15223 .....................................................18BS ISO 16000 .....................................................29BS ISO 17493 .....................................................29BS ISO 17593 .....................................................29BS ISO 17713 .....................................................29BS ISO 17714 .....................................................29BS ISO 23470 .....................................................30BS ISO 23601 .....................................................20BS ISO 27108 .....................................................19PD ISO/TR 7250 ..................................................19

Update Standards Jul 2010 Prices may be subject to change. 5

British Standards - Quick Reference Guide continued...

BS EN 12709 ......................................................26

BS EN 12711 ......................................................26

BS EN 12712 ......................................................27

BS EN 12713 ......................................................27

BS EN 12726 ......................................................27

BS EN 12748 ................................................15, 24

BS EN 12852 ......................................................21

BS EN 12853 ......................................................21

BS EN 12928 ......................................................27

BS EN ISO 12956 ................................................14

BS EN ISO 12958 ................................................14

BS EN 13007 ......................................................27

BS EN 13008 ......................................................27

BS EN 13025 ......................................................27

BS EN 13046 ......................................................27

BS EN 13047 ......................................................27

BS EN 13117 ......................................................27

BS EN 13129 ......................................................27

BS EN 13199 ......................................................27

BS EN 13245 ......................................................20

BS EN ISO 13295 ................................................27

BS EN 13381 ......................................................14

BS EN 13523 ......................................................14

BS EN 13621 ......................................................21

BS EN 13675 ......................................................21

BS EN 13775 ......................................................27

BS EN 13845 ......................................................27

BS EN ISO 13855 ..........................................14, 23

BS EN 13886 ......................................................21

BS EN 14023 ......................................................14

BS EN 14067 ......................................................27

BS EN 14085 ......................................................14

BS EN 14304 ......................................................14

BS EN 14307 ......................................................14

BS EN 14308 ......................................................14

BS EN 14309 ......................................................14

BS EN 14314 ......................................................14

BS EN ISO 14344 ................................................14

BS EN 14363 ......................................................27

BS EN 14397 ......................................................14

BS EN 14521 ......................................................27

BS EN 14565 ......................................................27

BS EN ISO 14577 ................................................27

BS EN ISO 14602 ................................................14

BS EN 14656 ......................................................21

BS EN 14673 ......................................................21

BS EN 14681 ......................................................21

BS EN 14719 ......................................................22

BS EN 14798 ......................................................27

BS EN 14847 ......................................................27

BS EN 14848 ......................................................27

BS EN 14849 ......................................................28

BS EN 14850 ......................................................28

BS EN 14854 ......................................................28

BS EN 14867 ......................................................28

BS EN 14887 ......................................................28

BS EN 14900 ......................................................28

BS EN 15016 ......................................................28

BS EN ISO 15025 ................................................28

BS EN 15273 ......................................................14

BS EN 15313 ......................................................14

BS EN ISO 15351 ................................................14

BS EN 15500 ......................................................20

BS EN ISO 15614 ................................................28

BS EN 15619 ......................................................21

BS EN ISO 15682 ................................................28

BS EN ISO 3923 ............................................11, 24

BS EN 4622 ........................................................12

BS EN 4623 ........................................................12

BS EN 4624 ........................................................12

BS EN 4632 ........................................................12

BS EN 4637 ........................................................12

BS EN 4638 ........................................................12

BS EN ISO 4871 ..................................................12

BS EN ISO 5267 ..................................................22

BS EN ISO 5270 ..................................................22

BS EN ISO 5529 ............................................18, 20

BS EN 6049 ........................................................12

BS EN 6059 ........................................................12

BS EN ISO 6326 ..................................................25

BS EN ISO 6520 ..................................................25

BS EN ISO 6540 ............................................12, 23

BS EN ISO 7284 ..................................................24

BS EN ISO 7346 ..................................................25

BS EN ISO 7396 ..................................................26

BS EN ISO 7541 ............................................12, 23

BS EN ISO 7899 ..................................................26

BS EN ISO 8062 ..................................................26

BS EN ISO 8185 ..................................................26

BS EN ISO 8502 ..................................................23

BS EN ISO 8729 ............................................18, 24

BS EN ISO 8748 ..................................................26

BS EN ISO 8750 ..................................................26

BS EN ISO 8751 ..................................................26

BS EN ISO 8936 ..................................................26

BS EN ISO 9073 ..................................................26

BS EN ISO 9185 ..................................................26

BS EN ISO 9241 ..................................................26

BS EN ISO 9308 ..................................................26

BS EN ISO 9377 ..................................................26

BS EN ISO 9680 ..................................................26

BS EN ISO 9917 ..................................................12

BS EN ISO 9920 ..................................................26

BS EN ISO 10426 ................................................20

BS EN ISO 10695 ................................................26

BS EN ISO 10705 ................................................26

BS EN ISO 10993 ..........................................12, 26

BS EN ISO 11058 ................................................12

BS EN ISO 11064 ................................................26

BS EN ISO 11201 ................................................12

BS EN ISO 11290 ................................................26

BS EN ISO 11339 ................................................12

BS EN ISO 11499 ................................................26

BS EN ISO 11546 ................................................12

BS EN ISO 11688 ................................................12

BS EN ISO 11691 ................................................12

BS EN ISO 11890 ................................................26

BS EN ISO 12001 ................................................12

BS EN 12044 ......................................................21

BS EN 12103 ......................................................26

BS EN 12104 ......................................................26

BS EN 12105 ......................................................26

BS EN 12351 ......................................................14

BS EN 12377 ......................................................26

BS EN 12455 ......................................................26

BS EN 12485 ......................................................14

BS EN 12497 ......................................................22

BS EN 12498 ......................................................22

BS EN 12520 ..........................................14, 23, 24

BS EN ISO 12625 ................................................22

BS EN 12674 ......................................................26

BS EN 12708 ......................................................26

BS 7001 ..............................................................22

BS 7079 ..............................................................23

BS 7140 ..............................................................25

BS 8431 ........................................................10, 23

BS 8550 ..............................................................10

BIP 2173 .............................................................20

BIP 2197 .............................................................20

DD CEN/TS 12977 ..............................................19

DD CEN/TS 14243 ..............................................19

DD CEN/TS 15705 ........................................15, 24

DD 8431 .......................................................10, 23

BS EN 54 ............................................................10

BS EN ISO 105 ....................................................10

BS EN 209 ..........................................................25

BS EN 210 ..........................................................25

BS EN 426 ..........................................................25

BS EN 427 ..........................................................25

BS EN 428 ..........................................................25

BS EN 429 ..........................................................25

BS EN 430 ..........................................................25

BS EN 431 ..........................................................25

BS EN 432 ..........................................................25

BS EN 433 ..........................................................25

BS EN 434 ..........................................................25

BS EN 435 ..........................................................25

BS EN 436 ..........................................................25

BS EN ISO 439 ..............................................10, 23

BS EN 622 ..........................................................10

BS EN 661 ..........................................................25

BS EN 662 ..........................................................25

BS EN 663 ..........................................................25

BS EN 664 ..........................................................25

BS EN 665 ..........................................................25

BS EN 666 ..........................................................25

BS EN 862 ..........................................................25

BS EN 920 ..........................................................22

BS EN 986 ..........................................................25

BS EN 999 ....................................................14, 23

BS EN ISO/IEC 17025 ..........................................28

BS EN ISO/IEC 17050 ..........................................15

BS EN 1058 ........................................................10

BS EN 1081 ........................................................25

BS EN 1104 ........................................................22

BS EN ISO 1135 ..................................................10

BS EN ISO 1179 ..................................................20

BS EN 1276 ........................................................10

BS EN 1318 ........................................................25

BS EN 1366 ........................................................11

BS EN 1374 ........................................................21

BS EN 1464 ..................................................11, 23

BS EN 1814 ........................................................25

BS EN 1815 ........................................................25

BS EN 1818 ........................................................25

BS EN 1846 ........................................................11

BS EN 1906 ........................................................11

BS EN 1912 ........................................................21

BS EN 1967 ..................................................11, 23

BS EN 1970 ........................................................16

BS EN 2240 ........................................................11

BS EN ISO 2739 ..................................................11

BS EN ISO 3369 ............................................11, 24

BS EN ISO 3386 ..................................................21

BS EN 3459 ..................................................11, 24

BS EN 3660 ........................................................11

BS EN ISO 3738 ..................................................11

BS EN ISO 3743 ..................................................11

Alpha-numeric sequence of British Standards continued...


BS ISO 17713 .....................................................29

BS ISO 17714 .....................................................29

BS ISO/IEC 18014 ...............................................18

BS ISO/IEC 18033 ...............................................22

BS ISO/IEC 19501 ...............................................29

BS ISO/IEC 19785 ...............................................22

BS ISO/IEC 19794 ...............................................22

BS ISO 19933 .....................................................29

BS ISO 20473 .....................................................29

BS ISO 20672 .....................................................29

BS ISO 20673 .....................................................29

BS ISO 21238 .....................................................29

BS ISO 21348 .....................................................29

BS ISO 21501 .....................................................29

BS ISO 22621 .....................................................18

BS ISO 22891 .....................................................30

BS ISO 23470 .....................................................30

BS ISO 23601 .....................................................20

BS ISO 24531 .....................................................30

BS ISO/IEC 24730 ...............................................18

BS ISO/IEC 27002 ...............................................30

BS ISO 27108 .....................................................19

BS ISO 27306 .....................................................19

BS ISO/IEC 29109 ...............................................19

BS ISO 80000 .....................................................30

BS IEC 61111 ...............................................17, 24

BS IEC 61112 ...............................................17, 24

BS IEC 61691 ......................................................24

BS IEC 62050 ......................................................24

BS IEC 62142 ......................................................24

BS IEC 62265 ......................................................24

BS IEC 62341 ......................................................18

BS IEC 62526 ......................................................30

BS IEC 62528 ......................................................30

DD ISO/TS 21872 ................................................30

DD ISO/TS 80004 ................................................20

DD IEC/PAS 61076 ..............................................19

DD IEC/PAS 61169 ..............................................19

DD CLC/TS 50534 ...............................................19

DD CLC/TS 50535 ...............................................19

DD CLC/TS 50539 ...............................................19

DD IEC TS 62282 ................................................19

DD IEC/TS 62282 ................................................19

PD CEN/TR 16015 ...............................................19

PD CR R210 ..................................................19, 24

PD ISO/TR 7250 ..................................................19

PD ISO/TR 9241 ..................................................19

PD ISO/TR 12134 ................................................19

PD ISO/IEC TR 15443 ..........................................29

PD ISO/IEC TR 15944 ..........................................19

PD ISO/IEC TR 18047 ..........................................20

PD ISO/IEC TR 20000 ..........................................19

PD CLC/TR 50485 .........................................19, 24

PD CLC/TR 50531 ...............................................19

PD IEC/TR 80002 ................................................19

BS 2S 510 ...........................................................23

BS 2S 511 ...........................................................23

BS 2S 514 ...........................................................23

BS 2TA 57 ...........................................................24

BS TA 57 .......................................................11, 24

NA to BS EN 1999 ..............................................20

BS EN 61347 ......................................................22

BS EN 61760 ......................................................17

BS EN 61977 ......................................................17

BS EN 62061 ......................................................20

BS EN 62110 ......................................................17

BS EN 62192 ......................................................17

BS EN 62282 ......................................................17

BS EN 62341 ................................................18, 20

BS EN 62417 ......................................................17

BS EN 62424 ......................................................17

BS EN 62439 ..........................................17, 18, 24

BS EN 62489 ......................................................18

BS EN 62496 ......................................................18

BS EN 62563 ......................................................18

BS EN 62576 ......................................................18

BS EN ISO 80000 ................................................28

DD ENV 12520 .............................................14, 24

BS ISO 230 .........................................................28

BS ISO 1088 .......................................................28

BS ISO 2537 .......................................................28

BS ISO 2834 .......................................................28

BS ISO 2846 .......................................................28

BS ISO 3116 .......................................................28

BS ISO 3455 .......................................................28

BS ISO 3739 .......................................................28

BS ISO 4000 .......................................................28

BS ISO 4037 .......................................................28

BS ISO 4254 .......................................................18

BS ISO 4366 .......................................................28

BS ISO 4662 .......................................................20

BS ISO 5529 .......................................................18

BS ISO 7176 .......................................................28

BS ISO 8529 .......................................................28

BS ISO 8568 .......................................................29

BS ISO 8729 .................................................18, 24

BS ISO 9230 .......................................................29

BS ISO 9459 .......................................................29

BS ISO 10110 .....................................................29

BS ISO 10275 .....................................................29

BS ISO 10294 .....................................................29

BS ISO 10295 .....................................................29

BS ISO 11843 .....................................................29

BS ISO 12006 .....................................................29

BS ISO 12640 .....................................................29

BS ISO 13656 .....................................................29

BS ISO 14065 .....................................................29

BS ISO/IEC 14662 ...............................................18

BS ISO/IEC 14763 ...............................................22

BS ISO 15223 .....................................................18

BS ISO 15396 .....................................................29

BS ISO 15472 .....................................................18

BS ISO 15519 .....................................................18

BS ISO 15769 .....................................................18

BS ISO/TS 15769 .................................................18

BS ISO 15901 .....................................................29

BS ISO 16000 .....................................................29

BS ISO 16528 .....................................................29

BS ISO 16883 .....................................................29

BS ISO 17455 .....................................................20

BS ISO 17493 .....................................................29

BS ISO 17593 .....................................................29

BS EN 15705 ................................................15, 24

BS EN 15746 ......................................................15

BS EN ISO 15747 ................................................15

BS EN ISO 15755 ................................................22

BS EN 15771 ......................................................15

BS EN 15825 ......................................................15

BS EN 15838 ......................................................15

BS EN 15859 ......................................................15

BS EN 15876 ......................................................15

BS EN ISO 15913 ................................................28

BS EN ISO 16000 ................................................23

BS EN ISO 19493 ................................................28

BS EN 20535 ......................................................23

BS EN ISO 20743 ................................................28

BS EN ISO 20776 ................................................28

BS EN ISO 20869 ..........................................15, 24

BS EN ISO 21606 ................................................28

BS EN 23270 ......................................................23

BS EN 23369 ................................................11, 24

BS EN 23923 ................................................11, 24

BS EN ISO 24014 ................................................28

BS EN ISO 25178 ................................................15

BS EN 26461 ......................................................28

BS EN 27213 ......................................................23

BS EN 31010 ......................................................15

BS EN 50085 ................................................15, 24

BS EN 50241 ................................................16, 24

BS EN 50342 ......................................................24

BS EN 50377 ......................................................15

BS EN 50491 ......................................................15

BS EN 50527 ......................................................15

BS EN 50530 ......................................................15

BS EN 50532 ......................................................15

BS EN 50540 ......................................................16

BS EN 60034 ......................................................16

BS EN 60079 ................................................16, 24

BS EN 60095 ......................................................24

BS EN 60204 ......................................................20

BS EN 60297 ......................................................16

BS EN 60317 ................................................16, 21

BS EN 60335 ................................................16, 21

BS EN 60512 ......................................................16

BS EN 60534 ......................................................16

BS EN 60601 ......................................................16

BS EN 60603 ......................................................16

BS EN 60613 ......................................................16

BS EN 60691 ......................................................21

BS EN 60704 ......................................................16

BS EN 60730 ................................................16, 21

BS EN 60825 ......................................................21

BS EN 60917 ......................................................16

BS EN 60947 ................................................16, 24

BS EN 60958 ......................................................21

BS EN 61000 ......................................................22

BS EN 61003 ......................................................17

BS EN 61029 ......................................................17

BS EN 61111 ................................................17, 24

BS EN 61112 ................................................17, 24

BS EN 61191 ......................................................17

BS EN 61249 ......................................................17

BS EN 61280 ......................................................17

Alpha-numeric sequence of British Standards continued...


BS EN ISO 105-E09:2010Textiles. Tests for colour fastness. Colourfastness to potting

supersedes BS EN ISO 105-E09:1997ISBN 978 0 580 65749 8£35.00 members, £70.00 non-members

TCI/81

BS EN ISO 105-E12:2010Textiles. Tests for colour fastness. Colourfastness to milling. Alkaline milling


TCI/81

BS EN ISO 439:2010Steel and iron. Determination of total siliconcontent. Gravimetric method

supersedes BS 6200-3.26.1:1995ISBN 978 0 580 69258 1£35.00 members, £70.00 non-members

ISE/102

BS EN 622-4:2009Fibreboards. Specifications. Requirements forsoftboards

supersedes BS EN 622-4:1997ISBN 978 0 580 62906 8£35.00 members, £70.00 non-members

B/541

BS EN 622-5:2009Fibreboards. Specifications. Requirements fordry process boards (MDF)


B/541

BS EN 1058:2009Wood-based panels. Determination ofcharacteristic 5-percentile values andcharacteristic mean values

supersedes BS EN 1058:1996ISBN 978 0 580 60357 0£43.00 members, £86.00 non-members

B/541

BS EN ISO 1135-4:2010Transfusion equipment for medical use.Transfusion sets for single use

supersedes BS EN ISO 1135-4:2004ISBN 978 0 580 63593 9£62.00 members, £124.00 non-members

CH/212

BS EN 1276:2009Chemical disinfectants and antiseptics.Quantitative suspension test for the evaluationof bactericidal activity of chemical disinfectantsand antiseptics used in food, industrial,domestic and institutional areas. Test methodand requirements (phase 2, step 1)


CH/216

BS 8431:2010Electrical static meters for secondary meteringand sub-metering. Specification

supersedes DD 8431:2005ISBN 978 0 580 68095 3£86.00 members, £172.00 non-members

SEM/1

BS 8550:2010Guide for the auditing of water qualitysampling

no current standard is supersededISBN 978 0 580 59976 7£98.00 members, £196.00 non-members

EH/3/6

BS EN PUBLICATIONS

The following are British Standardimplementations of the English languageversions of European Standards (ENs).

BSI has an obligation to publish all ENsand to withdraw any conflicting BritishStandards. This has led to a series ofstandards, BS ENs, using the EN number.

Note: The date referenced in theidentifier is the date of the Europeanstandard.

BS EN 54-23:2010Fire detection and fire alarm systems. Fire alarmdevices. Visual alarm devices


FSH/12/5

BS EN ISO 105-E01:2010Textiles. Tests for colour fastness. Colourfastness to water


TCI/81

BS EN ISO 105-E03:2010Textiles. Tests for colour fastness. Colourfastness to chlorinated water (swimming-poolwater)


TCI/81

BS EN ISO 105-E07:2010Textiles. Tests for colour fastness. Colourfastness to spotting. Water


TCI/81

BRITISH STANDARDS

The following British Standardpublications are available fromBSI Customer Services (see ’How to order’on page 2).

The publications listed below are newand revised British Standards that weremade available last month.

An existing BSI publication bearing anumber identical to one announcedbelow is automatically withdrawn unlessstated otherwise.

In all other cases of supersession, detailsare given and a corresponding entryappears in the ’British Standardswithdrawn’ section.

BRITISH STANDARD IMPLEMENTATIONSWILL BE SUPPLIED IN PREFERENCE TOEUROPEAN OR INTERNATIONALSTANDARDS, UNLESS OTHERWISEREQUESTED.

Please order by the British Standardreference not the ISBN number.

BS 2000 series standards are also availablefrom:–Library of the Energy Institute61 New Cavendish StreetLondon W1G 7ARTel: 020 7467 7100Fax: 020 7255 1472Email: [email protected] this series, member pricing isapplicable to BSI and Energy Institutemembers.

BS 3900-0:2010Methods of test for paints. Index of testmethods

supersedes BS 3900-0:1989+A1:1992ISBN 978 0 580 64646 1£62.00 members, £124.00 non-members

STI/10

BS 5760-18:2010Reliability of systems, equipment andcomponents. Guide to the demonstration ofdependability requirements. The dependabilitycase


DS/1

BS 5911-3:2010Concrete pipes and ancillary concrete products.Specification for unreinforced and reinforcedconcrete manholes and soakaways(complementary to BS EN 1917:2002)

supersedes BS 5911-3:2002+A1:2004ISBN 978 0 580 69013 6£62.00 members, £124.00 non-members

B/505

British Standards


BS EN 3459:2010Aerospace series. Titanium alloy TI-P63001 (Ti-4Al-4Mo-2Sn). Solution treated and aged.Plate. 6 mm < a ≤ 50 mm

supersedes BS TA 57:1974ISBN 978 0 580 65923 2£35.00 members, £70.00 non-members

ACE/61/-/49

BS EN 3660-006:2010Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors. Cable outlet, self-locking, style C,straight, shielded (cone grounding), unsealedwith clamp strain relief. Product standard


ACE/6

BS EN 3660-007:2010Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors. Cable outlet, self-locking, style C,90º, shielded (cone grounding), unsealed withclamp strain relief. Product standard


ACE/6

BS EN 3660-008:2010Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors. Cable outlet, self-locking, style C,45º, shielded (cone grounding), unsealed withclamp strain relief. Product standard


ACE/6

BS EN ISO 3738-1:2010Hardmetals. Rockwell hardness test (scale A).Test method


ISE/65

BS EN ISO 3743-2:2009Acoustics. Determination of sound power levelsof noise sources using sound pressure.Engineering methods for small, movablesources in reverberant fields. Methods forspecial reverberation test rooms


EH/1/4

BS EN ISO 3923-1:2010Metallic powders. Determination of apparentdensity. Funnel method


ISE/65

BS EN 2240-045:2010Aerospace series. Lamps, incandescent. Lamp,code 714. Product standard


ACE/6



ACE/6



ACE/6

BS EN 2240-048:2010Aerospace series. Lamps, incandescent. Lamp,code 718 NPC. Product standard


ACE/6



ACE/6



ACE/6

BS EN ISO 2739:2010Sintered metal bushes. Determination of radialcrushing strength

supersedes BS EN ISO 2739:1998ISBN 978 0 580 69467 7£35.00 members, £70.00 non-members

ISE/65

BS EN ISO 3369:2010Impermeable sintered metal materials andhardmetals. Determination of density


ISE/65

BS EN 1366-5:2010Fire resistance tests for service installations.Service ducts and shafts


FSH/22/9

BS EN 1464:2010Adhesives. Determination of peel resistance ofadhesive bonds. Floating roller method

supersedes BS EN 1464:1995 and BS EN 1967:2002ISBN 978 0 580 68328 2£35.00 members, £70.00 non-members

PRI/52

BS EN 1846-2:2009Firefighting and rescue service vehicles.Common requirements. Safety and performance

supersedes BS EN 1846-2:2001+A3:2009ISBN 978 0 580 59024 5£86.00 members, £172.00 non-members

FSH/17/9

BS EN 1906:2010Building hardware. Lever handles and knobfurniture. Requirements and test methods


B/538/4



ACE/6



ACE/6



ACE/6



ACE/6


BS EN ISO 11058:2010Geotextiles and geotextile-related products.Determination of water permeabilitycharacteristics normal to the plane, withoutload


B/553

BS EN ISO 11201:2009Acoustics. Noise emitted by machinery andequipment. Measurement of emission soundpressure levels at a work station and at otherspecified positions. Engineering method in anessentially free field over a reflecting plane


EH/1/4

BS EN ISO 11339:2010Adhesives. T-peel test for flexible-to-flexiblebonded assemblies


PRI/52

BS EN ISO 11546-1:2009Acoustics. Determination of sound insulationperformances of enclosures. Measurementsunder laboratory conditions (for declarationpurposes)


EH/1/4

BS EN ISO 11688-1:2009Acoustics. Recommended practice for thedesign of low-noise machinery and equipment.Planning


EH/1/4

BS EN ISO 11691:2009Acoustics. Measurement of insertion loss ofducted silencers without flow. Laboratorysurvey method


EH/1/4

BS EN ISO 12001:2009Acoustics. Noise emitted by machinery andequipment. Rules for the drafting andpresentation of a noise test code


EH/1/4

BS EN 6049-002:2010Aerospace series. Electrical cables, installation.Protection sleeve in meta-aramid fibres. Generaland list of product standards


ACE/6

BS EN 6059-501:2010Aerospace series. Electrical cables, installation.Protection sleeves. Test methods. Voltage prooftest


ACE/6

BS EN ISO 6540:2010Maize. Determination of moisture content (onmilled grains and on whole grains)

supersedes BS 4317-15:1981ISBN 978 0 580 69800 2£43.00 members, £86.00 non-members

AW/4

BS EN ISO 7541:2010Ground (powdered) paprika. Determination oftotal natural colouring matter content

supersedes BS 4585-16:1990ISBN 978 0 580 68791 4£35.00 members, £70.00 non-members

AW/7

BS EN ISO 9917-2:2010Dentistry. Water-based cements. Resin-modifiedcements


CH/106/1

BS EN ISO 10993-1:2009Biological evaluation of medical devices.Evaluation and testing within a riskmanagement process

supersedes BS EN ISO 10993-1:2009 which is theimplementation of EN ISO 10993-1:2009, JuneeditionISBN 978 0 580 71616 4£62.00 members, £124.00 non-members

CH/194

Implements EN ISO 10993-1:2009, October edition.

BS EN ISO 10993-9:2009Biological evaluation of medical devices.Framework for identification and quantificationof potential degradation products

supersedes BS EN ISO 10993-9:2009 which is theimplementation of EN ISO 10993-9:2009, MayeditionISBN 978 0 580 71617 1£43.00 members, £86.00 non-members

CH/194

Implements EN ISO 10993-9:2009, Decemberedition.

BS EN 4622:2010Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heatresisting steel FE-PA2601 (A286), MoS2 coated

no current standard is superseded

ISBN 978 0 580 70746 9£35.00 members, £70.00 non-members

ACE/12

BS EN 4623:2010Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heatresisting nickel base alloy NI-PH2601 (Inconel718), silver plated



ACE/12

BS EN 4624:2010Aerospace series. Inserts, MJ threads, self-locking, with self-broaching keys, in heatresisting nickel base alloy NI-PH1302(Waspaloy), silver plate



ACE/12

BS EN 4632-003:2010Aerospace series. Weldability and brazeabilityof materials in aerospace constructions.Welding and brazing of homogeneousassemblies of unalloyed and low alloy steels



ACE/61

BS EN 4637:2010Aerospace series. Blast media. White corundum



ACE/65

BS EN 4638:2010Aerospace series. Blast media. Browncorundum, without iron



ACE/65

BS EN ISO 4871:2009Acoustics. Declaration and verification of noiseemission values of machinery and equipment

supersedes BS EN ISO 4871:1997


EH/1/4

BS EN Publications continued...


BS EN ISO 14344:2010Welding consumables. Procurement of fillermaterials and fluxes


WEE/39

BS EN 14397-1:2010Fertilizers and liming materials. Determinationof carbon dioxide. Method for solid fertilizers


CII/37

BS EN ISO 14602:2010Non-active surgical implants. Implants forosteosynthesis. Particular requirements


CH/150/5

BS EN 15273-1:2009Railway applications. Gauges. General. Commonrules for infrastructure and rolling stock


RAE/1/-/12

BS EN 15273-2:2009Railway applications. Gauges. Rolling stockgauge


RAE/1/-/12

BS EN 15273-3:2009Railway applications. Gauges. Structure gauges


RAE/1/-/12

BS EN 15313:2010Railway applications. In-service wheelsetoperation requirements. In-service and off-vehicle wheelset maintenance


RAE/3/-/1

BS EN ISO 15351:2010Steel and iron. Determination of nitrogencontent. Thermal conductimetric method afterfusion in a current of inert gas (Routinemethod)


ISE/102

BS EN 14023:2010Bitumen and bituminous binders. Specificationframework for polymer modified bitumens


B/510/19

BS EN 14085:2010Resilient floor coverings. Specification for floorpanels for loose laying


PRI/3/60

BS EN 14304:2009Thermal insulation products for buildingequipment and industrial installations. Factorymade flexible elastomeric foam (FEF) products.Specification


PRI/72

BS EN 14307:2009Thermal insulation products for buildingequipment and industrial installations. Factorymade extruded polystyrene foam (XPS)products. Specification


PRI/72

BS EN 14308:2009Thermal insulation products for buildingequipment and industrial installations. Factorymade rigid polyurethane foam (PUR) andpolyisocyanurate foam (PIR) products.Specification


PRI/72

BS EN 14309:2009Thermal insulation products for buildingequipment and industrial installations. Factorymade products of expanded polystyrene (EPS).Specification


PRI/72

BS EN 14314:2009Thermal insulation products for buildingequipment and industrial installations. Factorymade phenolic foam (PF) products. Specification


PRI/72

BS EN 12351:2010Industrial valves. Protective caps for valves withflanged connections


PSE/18/1

BS EN 12485:2010Chemicals used for treatment of water intendedfor human consumption. Calcium carbonate,high-calcium lime, half-burnt dolomite,magnesium oxide and calcium magnesiumcarbonate. Test methods


CII/59

BS EN 12520:2010Furniture. Strength, durability and safety.Requirements for domestic seating

supersedes BS 4875-1:2007 andDD ENV 12520:2000ISBN 978 0 580 63252 5£35.00 members, £70.00 non-members

FW/0/2

BS EN ISO 12956:2010Geotextiles and geotextile-related products.Determination of the characteristic opening size


B/553

BS EN ISO 12958:2010Geotextiles and geotextile-related products.Determination of water flow capacity in theirplane


B/553

BS EN 13381-8:2010Test methods for determining the contributionto the fire resistance of structural members.Applied reactive protection to steel members


FSH/22

BS EN 13523-1:2009Coil coated metals. Test methods. Film thickness


STI/27

BS EN ISO 13855:2010Safety of machinery. Positioning of safeguardswith respect to the approach speeds of parts ofthe human body

supersedes BS EN 999:1998+A1:2008ISBN 978 0 580 58218 9£81.00 members, £162.00 non-members

MCE/3



BS EN 50377-8-11:2010Connector sets and interconnect components tobe used in optical fibre communication systems.Product specifications. Type LSH-PC simplexterminated on IEC 60793-2-50 category B1.1 andB1.3 singlemode fibre with titanium compositeferrule for category C


GEL/86/2

BS EN 50377-8-12:2010Connector sets and interconnect components tobe used in optical fibre communication systems.Product specifications. Type LSH-APC simplexterminated on IEC 60793-2-50 category B1.1 andB1.3 singlemode fibre with titanium compositeferrule for category U


GEL/86/2

BS EN 50377-8-13:2010Connector sets and interconnect components tobe used in optical fibre communication systems.Product specifications. Type LSH-PC simplexterminated on IEC 60793-2-50 category B1.1 andB1.3 singlemode fibre with titanium compositeferrule for category U


GEL/86/2

BS EN 50491-2:2010General requirements for home and buildingelectronic systems (HBES) and buildingautomation and control systems (BACS).Environmental conditions


IST/6

BS EN 50527-1:2010Procedure for the assessment of the exposureto electromagnetic fields of workers bearingactive implantable medical devices. General


GEL/106

BS EN 50530:2010Overall efficiency of grid connectedphotovoltaic inverters


GEL/82

BS EN 50532:2010Compact equipment assembly for distributionsubstations (CEADS)


PEL/17/1

BS EN 15876-1:2010Electronic fee collection. Evaluation of on-boardand roadside equipment for conformity toEN 15509. Test suite structure and test purposes


EPL/278

BS EN ISO/IEC 17050-1:2010Conformity assessment. Supplier’s declaration ofconformity. General requirements

supersedes BS EN ISO/IEC 17050-1:2004ISBN 978 0 580 70040 8£35.00 members, £70.00 non-members

CAS/1

BS EN ISO 20869:2010Footwear. Test methods for outsoles, insoles,lining and insocks. Water soluble content


TCI/69

BS EN ISO 25178-6:2010Geometrical product specifications (GPS).Surface texture. Areal. Classification of methodsfor measuring surface texture


TDW/4

BS EN 31010:2010Risk management. Risk assessment techniques


DS/1

BS EN 50085-2-3:2010Cable trunking systems and cable ductingsystems for electrical installations. Particularrequirements for slotted cable trunking systemsintended for installation in cabinets

supersedes BS EN 50085-2-3:2001ISBN 978 0 580 59271 3£43.00 members, £86.00 non-members

PEL/213

BS EN 50377-8-10:2010Connector sets and interconnect components tobe used in optical fibre communication systems.Product specifications. Type LSH-APC simplexterminated on IEC 60793-2-50 category B1.1 andB1.3 singlemode fibre with titanium compositeferrule for category C


GEL/86/2

BS EN 15705:2010Fertilizers. Determination of urea condensatesusing high-performance liquid chromatography(HPLC). Isobutylidenediurea andcrotonylidenediurea (method A) and methylen-urea oligomers (method B)

supersedes DD CEN/TS 15705:2009ISBN 978 0 580 68255 1£62.00 members, £124.00 non-members

CII/37

BS EN 15746-1:2010Railway applications. Track. Road-rail machinesand associated equipment. Technicalrequirements for running and working


RAE/2

BS EN 15746-2:2010Railway applications. Track. Road-rail machinesand associated equipment. General safetyrequirements


RAE/2

BS EN ISO 15747:2010Plastic containers for intravenous injections


CH/212

BS EN 15771:2010Vitreous and porcelain enamels. Determinationof surface scratch hardness according to theMohs scale


STI/36

BS EN 15825:2010Textile floor coverings. Classification ofmachine-made rugs and runners without pile


PRI/3/60

BS EN 15838:2009Customer contact centres. Requirements forservice provision


SVS/0/1

BS EN 15859:2010Air quality. Certification of automated dustarrestment plant monitors for use on stationarysources. Performance criteria and testprocedures


EH/2/1


BS EN 60603-7-41:2010Connectors for electronic equipment. Detailspecification for 8-way, unshielded, free andfixed connectors, for data transmissions withfrequencies up to 500 MHz


EPL/48

BS EN 60603-7-51:2010Connectors for electronic equipment. Detailspecification for 8-way, shielded, free and fixedconnectors, for data transmissions withfrequencies up to 500 MHz


EPL/48

BS EN 60613:2010Electrical and loading characteristics of X-raytube assemblies for medical diagnosis

supersedes BS 6058:1989 which remains currentISBN 978 0 580 54178 0£62.00 members, £124.00 non-members

CH/62/2

BS EN 60704-2-2:2010Household and similar appliances. Test code forthe determination of airborne acoustical noise.Particular requirements for fan heaters


CPL/59

BS EN 60730-2-15:2010Automatic electrical controls for household andsimilar use. Particular requirements forautomatic electrical air flow, water flow andwater level sensing controls

supersedes BS EN 60730-2-15:1996, BS EN 60730-2-16:1998 and BS EN 60730-2-18:1999 whichremain currentISBN 978 0 580 54163 6£71.00 members, £142.00 non-members

CPL/72

BS EN 60917-2-4:2010Modular order for the development ofmechanical structures for electronic equipmentpractices. Sectional specification. Interfacecoordination dimensions for the 25 mmequipment practice. Adaptation dimensions forsubracks or chassis applicable in cabinets orracks in accordance with IEC 60297-3-100 (19 in)


EPL/48

BS EN 60947-4-1:2010Low-voltage switchgear and controlgear.Contactors and motor-starters.Electromechanical contactors and motor-starters

supersedes BS EN 60947-4-1:2001 which remainscurrentISBN 978 0 580 58921 8£106.00 members, £212.00 non-members

PEL/17/2

BS EN 60317-25:2010Specifications for particular types of windingwires. Polyester or polyesterimide overcoatedwith polyamide-imide enamelled roundaluminium wire, class 200


GEL/55

BS EN 60335-2-2:2010Household and similar electrical appliances.Safety. Particular requirements for vacuumcleaners and water-suction cleaning appliances


CPL/61/1

BS EN 60335-2-13:2010Household and similar electrical appliances.Safety. Particular requirements for deep fatfryers, frying pans and similar appliances

supersedes BS EN 60335-2-13:2003+A2:2008 whichremains currentISBN 978 0 580 65779 5£43.00 members, £86.00 non-members

CPL/61/7

BS EN 60512-9-1:2010Connectors for electronic equipment. Tests andmeasurements. Endurance tests. Test 9a.Mechanical operation

supersedes BS 5772-5:1993 which remains currentISBN 978 0 580 62121 5£35.00 members, £70.00 non-members

EPL/48

BS EN 60534-2-4:2009Industrial-process control valves. Flow capacity.Inherent flow characteristics and rangeability


GEL/65/2

BS EN 60601-1-6:2010Medical electrical equipment. Generalrequirements for basic safety and essentialperformance. Collateral standard. Usability


CH/62/1

BS EN 60601-2-52:2010Medical electrical equipment. Particularrequirements for basic safety and essentialperformance of medical beds

supersedes BS EN 1970:2000 and the dualnumbered standard BS EN 60601-2-38:1997,BS 5724-2.38:1997 which remain currentISBN 978 0 580 54190 2£93.00 members, £186.00 non-members

CH/62/4

BS EN 50540:2010Conductors for overhead lines. Aluminiumconductors steel supported (ACSS)


GEL/7

BS EN 60034-18-1:2010Rotating electrical machines. Functionalevaluation of insulation systems. Generalguidelines


PEL/2

BS EN 60079-29-4:2010Explosive atmospheres. Gas detectors.Performance requirements of open pathdetectors for flammable gases

supersedes BS EN 50241-1:1999 and BS EN 50241-2:1999ISBN 978 0 580 58641 5£71.00 members, £142.00 non-members

GEL/31/19

BS EN 60297-3-106:2010Mechanical structures for electronic equipment.Dimensions of mechanical structures of the482,6 mm (19 in) series. Adaptation dimensionsfor subracks and chassis applicable with metriccabinets or racks in accordance with IEC 60917-2-1


EPL/48

BS EN 60317-12:2010Specifications for particular types of windingwires. Polyvinyl acetal enamelled round copperwire, class 120


GEL/55

BS EN 60317-13:2010Specifications for particular types of windingwires. Polyester or polyesterimide overcoatedwith polyamide-imide enamelled round copperwire, class 200


GEL/55

BS EN 60317-17:2010Specifications for particular types of windingwires. Polyvinyl acetal enamelled rectangularcopper wire, class 105


GEL/55



BS EN 62417:2010Semiconductor devices. Mobile ion tests formetal-oxide semiconductor field effecttransistors (MOSFETs)


ISBN 978 0 580 58622 4

£35.00 members, £70.00 non-members

EPL/47

BS EN 62424:2009Representation of process control engineering.Requests in P&I diagrams and data exchangebetween P&ID tools and PCE-CAE tools


ISBN 978 0 580 69275 8


GEL/65

BS EN 62439-1:2010Industrial communication networks. Highavailability automation networks. Generalconcepts and calculation methods

supersedes BS EN 62439:2008

ISBN 978 0 580 65552 4


AMT/7

BS EN 62439-2:2010Industrial communication networks. Highavailability automation networks. Mediaredundancy protocol (MRP)


ISBN 978 0 580 70826 8


AMT/7

BS EN 62439-3:2010Industrial communication networks. Highavailability automation networks. Parallelredundancy protocol (PRP) and high availabilityseamless redundancy (HSR)


ISBN 978 0 580 70827 5


AMT/7

BS EN 62439-4:2010Industrial communication networks. Highavailability automation networks. Cross-network redundancy protocol (CRP)


ISBN 978 0 580 70828 2


AMT/7

BS EN 62439-5:2010Industrial communication networks. Highavailability automation networks. Beaconredundancy protocol (BRP)


ISBN 978 0 580 70829 9


AMT/7

BS EN 61280-1-3:2010Fibre optic communication subsystem testprocedures. General communication subsystems.Central wavelength and spectral widthmeasurement


GEL/86/3

BS EN 61280-2-1:2010Fibre optic communication subsystem testprocedures. Digital systems. Receiver sensitivityand overload measurement


GEL/86/3

BS EN 61760-3:2010Surface mounting technology. Standard methodfor the specification of components for throughhole reflow (THR) soldering


EPL/501

BS EN 61977:2010Fibre optic interconnecting devices and passivecomponents. Fibre optic filters. Genericspecification


GEL/86/2

BS EN 62110:2009Electric and magnetic field levels generated byAC power systems. Measurement procedureswith regard to public exposure


GEL/106

BS EN 62192:2009Live working. Insulating ropes


PEL/78

BS EN 62282-6-100:2010Fuel cell technologies. Micro fuel cell powersystems. Safety


GEL/105

BS EN 61003-2:2009Industrial-process control systems. Instrumentswith analogue inputs and two- or multi-stateoutputs. Guidance for inspection and routinetesting


GEL/65/2

BS EN 61029-2-8:2010Safety of transportable motor-operated electrictools. Particular requirements for single spindlevertical moulders


CPL/116

BS EN 61111:2009Live working. Electrical insulating matting

supersedes BS IEC 61111:1992ISBN 978 0 580 61555 9£71.00 members, £142.00 non-members

PEL/78

BS EN 61112:2009Live working. Electrical insulating blankets

supersedes BS IEC 61112:1992ISBN 978 0 580 61556 6£81.00 members, £162.00 non-members

PEL/78

BS EN 61191-6:2010Printed board assemblies. Evaluation criteria forvoids in soldered joints of BGA and LGA andmeasurement methods


EPL/501

BS EN 61249-2-41:2010Materials for printed boards and otherinterconnecting structures. Reinforced basematerials clad and unclad. Brominated epoxidecellulose paper/woven E-glass reinforcedlaminate sheets of defined flammability(vertical burning test), copper-clad for lead-freeassembly


EPL/501

BS EN 61249-2-42:2010Materials for printed boards and otherinterconnecting structures. Reinforced basematerials clad and unclad. Brominated epoxidenon-woven/woven E-glass reinforced laminatesheets of defined flammability (vertical burningtest), copper-clad for lead-free assembly


EPL/501


To order visit

www.bsigroup.com/shop

BS ISO 15519-1:2010Specification for diagrams for process industry.General rules


TDW/4

BS ISO 15769:2010Hydrometry. Guidelines for the application ofacoustic velocity meters using the Doppler andecho correlation methods

supersedes BS ISO/TS 15769:2000ISBN 978 0 580 59637 7£93.00 members, £186.00 non-members

CPI/113/1

BS ISO/IEC 18014-2:2009Information technology. Security techniques.Time-stamping services. Mechanisms producingindependent tokens

supersedes BS ISO/IEC 18014-2:2002ISBN 978 0 580 55484 1£71.00 members, £142.00 non-members

IST/33

BS ISO/IEC 18014-3:2009Information technology. Security techniques.Time-stamping services. Mechanisms producinglinked tokens

supersedes BS ISO/IEC 18014-3:2004ISBN 978 0 580 66953 8£81.00 members, £162.00 non-members

IST/33

BS ISO 22621-5:2010Plastics piping systems for the supply of gaseousfuels for maximum operating pressures up toand including 2 MPa (20 bar). Polyamide (PA).Fitness for purpose of the system


PRI/88/2

BS ISO 22621-6:2010Plastics piping systems for the supply of gaseousfuels for maximum operating pressures up toand including 2 MPa (20 bar). Polyamide (PA).Code of practice for design, handling andinstallation


PRI/88/2

BS ISO/IEC 24730-5:2010Information technology. Real-time locatingsystems (RTLS). Chirp spread spectrum (CSS) at2,4 GHz air interface


IST/34

BS IMPLEMENTATIONS

BS Implementations comprise the ISO orIEC text without any national deviationand with front and back cover indicatingthe UK committee responsible.No other information will normally beadded.

Note: The date referenced in theidentifier is the date of the internationalstandard.

BS ISO 4254-8:2009Agricultural machinery. Safety. Solid fertilizerdistributors


AGE/32

BS ISO 8729-1:2010Ships and marine technology. Marine radarreflectors. Passive type


EPL/80

BS ISO 8729-2:2009Ships and marine technology. Marine radarreflectors. Active type


EPL/80

BS ISO/IEC 14662:2010Information technology. Open-edi referencemodel

supersedes BS ISO/IEC 14662:2004ISBN 978 0 580 70667 7£93.00 members, £186.00 non-members

IST/40

BS ISO 15223-2:2010Medical devices. Symbols to be used withmedical device labels, labelling, andinformation to be supplied. Symboldevelopment, selection and validation


CH/210/3

BS ISO 15472:2010Surface chemical analysis. X-ray photoelectronspectrometers. Calibration of energy scales

supersedes BS ISO 15472:2001ISBN 978 0 580 71539 6£71.00 members, £142.00 non-members

CII/60

BS EN 62439-6:2010Industrial communication networks. Highavailability automation networks. Distributedredundancy protocol (DRP)


AMT/7

BS EN 62489-1:2010Electroacoustics. Audio-frequency inductionloop systems for assisted hearing. Methods ofmeasuring and specifying the performance ofsystem components


EPL/29

BS EN 62496-3-1:2010Optical circuit boards. Performance standard.Flexible optical circuit boards usingunconnectorized optical glass fibres


GEL/86

BS EN 62563-1:2010Medical electrical equipment. Medical imagedisplay systems. Evaluation methods


CH/62/2

BS EN 62576:2010Electric double-layer capacitors for use in hybridelectric vehicles. Test methods for electricalcharacteristics


PEL/69

BS ENs IMPLEMENTED BYAMENDMENT

For the standards listed below see alsothe ’Corrigenda to British Standards’ and’Updated British Standards’ sections ofthis issue of Update Standards.

BS EN ISO 5529:2010Wheat. Determination of the sedimentationindex. Zeleny test

AW/4

Implementation of European Standard EN ISO 5529by amendment to BS ISO 5529:2007

BS EN 62341-1-1:2009Organic light emitting diode (OLED) displays.Generic specifications

EPL/47

Implementation of European Standard EN 62341-1-1 by amendment to BS IEC 62341-1-1:2009



DD CEN/TS 14243:2010Materials produced from end of life tyres.Specification of categories based on theirdimension(s) and impurities and methods fordetermining their dimension(s) and impurities

supersedes CWA 14243:2002ISBN 978 0 580 53713 4£72.00 members, £144.00 non-members

PRI/73

DD CLC/TS 50534:2010Railway applications. Generic systemarchitectures for onboard electric auxiliarypower systems


GEL/9/2

DD CLC/TS 50535:2010Railway applications. Onboard auxiliary powerconverter systems


GEL/9/2

DD CLC/TS 50539-22:2010Low-voltage surge protective devices. Surgeprotective devices for specific applicationincluding D.C. Selection and applicationprinciples. Wind turbine applications


PEL/37/1

DD IEC/PAS 61076-2-109:2010Connectors for electronic equipment. Productrequirements. Circular connectors. Detailspecification for connectors M 12 x 1 withscrew-locking, for data transmissions withfrequencies up to 500 MHz


EPL/48

DD IEC/PAS 61169-44:2010Radio-frequency connectors. Sectionalspecification for series SMP push-on radio-frequency coaxial connectors


EPL/46

DD IEC/TS 62282-1:2010Fuel cell technologies. Terminology

supersedes DD IEC TS 62282-1:2005ISBN 978 0 580 61737 9£44.00 members, £88.00 non-members

GEL/105

PD ISO/IEC TR 15944-6:2009Information technology. Business operationalview. Technical introduction to e-Businessmodelling


IST/40

PD CEN/TR 16015:2010Hardware for furniture. Terms for lockingmechanisms


FW/0/1

PD ISO/IEC TR 20000-5:2010Information technology. Service management.Exemplar implementation plan for ISO/IEC20000-1


IST/15/-/8

PD CLC/TR 50485:2010Electromagnetic compatibility. Emissionmeasurements in fully anechoic chambers

supersedes PD CR R210-010:2002ISBN 978 0 580 64296 8£81.00 members, £162.00 non-members

GEL/210/12

PD CLC/TR 50531:2009Alarm systems. Terms and definitions


GW/1

PD IEC/TR 80002-1:2009Medical device software. Guidance on theapplication of ISO 14971 to medical devicesoftware


CH/62/1

DRAFTS FOR DEVELOPMENT

DD CEN/TS 12977-4:2010Thermal solar systems and components. Custombuilt systems. Performance test methods forsolar combistores


RHE/25

BS ISO 27108:2010Water quality. Determination of selected planttreatment agents and biocide products. Methodusing solid-phase microextraction (SPME)followed by gas chromatography-massspectrometry (GC-MS)


EH/3/2

BS ISO 27306:2009Metallic materials. Method of constraint losscorrection of CTOD fracture toughness forfracture assessment of steel components


ISE/101/4

BS ISO/IEC 29109-2:2010Information technology. Conformance testingmethodology for biometric data interchangeformats defined in ISO/IEC 19794. Fingerminutiae data


IST/44

BS ISO/IEC 29109-4:2010Information technology. Conformance testingmethodology for biometric data interchangeformats defined in ISO/IEC 19794. Finger imagedata


IST/44

PUBLISHED DOCUMENTS

PD ISO/TR 7250-2:2010Basic human body measurements fortechnological design. Statistical summaries ofbody measurements from individualISO populations


PH/9/4

PD ISO/TR 9241-100:2010Ergonomics of human-system interaction.Introduction to standards related to softwareergonomics


PH/9

PD ISO/TR 12134:2010Rubber. Estimation of uncertainty for testmethods. Non-functional parameters


PRI/22


BS ISO 4662:2009Rubber, vulcanized or thermoplastic.Determination of rebound resilience

CORRIGENDUM 1

PRI/22

BS ISO 17455:2005Plastics piping systems. Multilayer pipes.Determination of the oxygen permeability ofthe barrier pipe

CORRIGENDUM 1

PRI/88/4

BS ISO 23601:2009Safety identification. Escape and evacuationplan signs

CORRIGENDUM 1

PH/8/1

PD ISO/IEC TR 18047-2:2006Information technology. Radio frequencyidentification device conformance test methods.Test methods for air interface communicationsbelow 135 kHz

CORRIGENDUM 1

IST/34

NA to BS EN 1999-1-1:2007+A1:2009UK National Annex to Eurocode 9. Design ofaluminium structures. General structural rules

CORRIGENDUM 1

B/525/9

Also incorporates Amendment 1

UPDATED BRITISHSTANDARDS

The following standards have beenamended and the amendments havebeen incorporated into an updatedstandard.

NOTE: Updated British Standardsmust be reordered as theamendments are not availableseparately.

BS 5911-1:2002+A2:2010Concrete pipes and ancillary concrete products.Specification for unreinforced and reinforcedconcrete pipes (including jacking pipes) andfittings with flexible joints (complementary toBS EN 1916:2002)

AMENDMENT 2£62.00 members, £124.00 non-members

B/505


BS 5911-4:2002+A2:2010Concrete pipes and ancillary concrete products.Specification for unreinforced and reinforcedconcrete inspection chambers (complementaryto BS EN 1917:2002)


B/505


BS EN ISO 1179-4:2008Connections for general use and fluid power.Ports and stud ends with ISO 228-1 threads withelastomeric or metal-to-metal sealing. Studends for general use only with metal-to-metalsealing (type B)

CORRIGENDUM 1

MCE/18/-/4

BS EN ISO 5529:2010Wheat. Determination of the sedimentationindex. Zeleny test

CORRIGENDUM 1

AW/4

BS EN ISO 10426-1:2009Petroleum and natural gas industries. Cementsand materials for well cementing. Specification

CORRIGENDUM 1

PSE/17/-/3

BS EN 13245-2:2008Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. PVC-Uprofiles and PVC-UE profiles for internal andexternal wall and ceiling finishes

CORRIGENDUM 1

PRI/82

BS EN 15500:2008Control for heating, ventilating and air-conditioning applications. Electronic individualzone control equipment

CORRIGENDUM 1

RHE/16

BS EN 60204-1:2006+A1:2009Safety of machinery. Electrical equipment ofmachines. General requirements

CORRIGENDUM 1

MCE/3


BS EN 60204-11:2000Safety of machinery. Electrical equipment ofmachines. Requirements for HV equipment forvoltages above 1000 V A.C. or 1500 V D.C. andnot exceeding 36 kV

CORRIGENDUM 1

MCE/3

BS EN 62061:2005Safety of machinery. Functional safety of safety-related electrical, electronic and programmableelectronic control systems

CORRIGENDUM 3

MCE/3

Also incorporates Corrigenda 1 & 2

BS EN 62341-1-1:2009Organic light emitting diode (OLED) displays.Generic specifications

CORRIGENDUM 1

EPL/47

DD ISO/TS 80004-3:2010Nanotechnologies. Vocabulary. Carbon nano-objects


NTI/1

SPECIALIST BOOKS FROMBSI

BIP 2173The BS 9999 Handbook. Effective Fire Safety inthe Design, Management and Use of Buildings


BIP 2197The Essential Guide to Eurocodes Transition

no current standard is supersededISBN 978 0 580 69451 6£40.00 members, £40.00 non-membersVAT is applicable to this item.

CORRIGENDA TO BRITISHSTANDARDSMost amendments are not issuedseparately. Those that make significantchanges to a standard are incorporatedinto the standard which is reissued (see‘Updated British Standards’). BritishStandards which have been corrected viacorrigenda are available on request, freeof charge to past purchasers of thestandard. All amendments and corrigendato date of despatch are included withinany main publication when ordered forthe first time.

The following corrigenda to BritishStandards were made available lastmonth.

BS EN ISO 1179-1:2008Connections for general use and fluid power.Ports and stud ends with ISO 228-1 threads withelastomeric or metal-to-metal sealing. Threadedports

CORRIGENDUM 1

MCE/18/-/4

BS EN ISO 1179-2:2008Connections for general use and fluid power.Ports and stud ends with ISO 228-1 threads withelastomeric or metal-to-metal sealing. Heavy-duty (S series) and light-duty (L series) stud endswith elastomeric sealing (type E)

CORRIGENDUM 1

MCE/18/-/4

BS EN ISO 1179-3:2008Connections for general use and fluid power.Ports and stud ends with ISO 228-1 threads withelastomeric or metal-to-metal sealing. Light-duty (L series) stud ends with sealing by O-ringwith retaining ring (types G and H)

CORRIGENDUM 1

MCE/18/-/4

Drafts For Development continued...


BS EN 60317-42:1997+A1:2010Specifications for particular types of windingwires. Polyester-amide-imide enamelled roundcopper wire, class 200


GEL/55

BS EN 60317-43:1997+A1:2010Specifications for particular types of windingwires. Aromatic polyimide tape wrapped roundcopperwire, class 240


GEL/55

BS EN 60335-2-29:2004+A2:2010Household and similar electrical appliances.Safety. Particular requirements for batterychargers


CPL/61/1

Also incorporates Amendment 1 and Corrigenda 1

BS EN 60335-2-41:2003+A2:2010Household and similar electrical appliances.Safety. Particular requirements for pumps


CPL/61/01


BS EN 60691:2003+A2:2010Thermal-links. Requirements and applicationguide


PEL/32


BS EN 60730-2-5:2002+A2:2010Automatic electrical controls for household andsimilar use. Particular requirements forautomatic electrical burner control systems


CPL/72

Also incorporates Amendments 1 & 11

BS EN 60825-4:2006+A1:2008Safety of laser products. Laser guards


EPL/76

BS EN 60958-3:2006+A1:2010Digital audio interface. Consumer applications


EPL/100

BS EN 12853:2001+A1:2010Food processing machinery. Hand-held blendersand whisks. Safety and hygiene requirements


MCE/3/5

BS EN 13621:2004+A1:2010Food processing machinery. Salad dryers. Safetyand hygiene requirements


MCE/3/5

BS EN 13675:2004+A1:2010Safety of machinery. Safety requirements fortube forming and rolling mills and theirfinishing line equipment


MCE/23

BS EN 13886:2005+A1:2010Food processing machinery. Cooking kettlesequipped with powered stirrer and/or mixer.Safety and hygiene requirements


MCE/3/5

BS EN 14656:2006+A1:2010Safety of machinery. Safety requirements forextrusion presses for steel and non-ferrousmetals


MCE/23

BS EN 14673:2006+A1:2010Safety of machinery. Safety requirements forhydraulically powered open die hot forgingpresses for the forging of steel and non-ferrousmetals


MCE/23

BS EN 14681:2006+A1:2010Safety of machinery. Safety requirements formachinery and equipment for production ofsteel by electric arc furnaces


MCE/23

BS EN 15619:2008+A1:2010Rubber or plastic coated fabrics. Safety oftemporary structures (tents). Specification forcoated fabrics intended for tents and relatedstructures


TCI/69

BS 5911-5:2004+A1:2010Concrete pipes and ancillary concrete products.Specification for prestressed non-pressure pipesand fittings with flexible joints


B/505

BS 5911-6:2004+A1:2010Concrete pipes and ancillary concrete products.Specification for road gullies and gully coverslabs


B/505

BS EN 1374:2000+A1:2010Agricultural machinery. Silos stationaryunloaders for round silos. Safety


AGE/6

Also incorporates Corrigenda 1

BS EN 1912:2004+A4:2010Structural timber. Strength classes. Assignmentof visual grades and species


B/518

Also incorporates Amendments 1, 2 & 3

BS EN ISO 3386-1:1997+A1:2010Polymeric materials, cellular flexible.Determination of stress-strain characteristics incompression. Low-density materials


PRI/24

BS EN ISO 3386-2:1998+A1:2010Flexible cellular polymeric materials.Determination of stress-strain characteristics incompression. High-density materials


PRI/24

BS EN 12044:2005+A1:2009Footwear, leather and imitation leather goodsmanufacturing machines. Cutting and punchingmachines. Safety requirements


MCE/3/12


BS EN 12852:2001+A1:2010Food processing machinery. Food processorsand blenders. Safety and hygiene requirements


MCE/3/5


BS EN 920:2001Paper and board intended to come into contactwith foodstuffs. Determination of dry mattercontent in an aqueous extract

CW/47/3

BS EN 1104:2005Paper and board intended to come into contactwith foodstuffs. Determination of the transferof antimicrobial constituents

CW/47/3

BS EN ISO 5267-1:2001Pulps. Determination of drainability. Schopper-Riegler method

PAI/11

BS EN ISO 5270:2000Pulps. Laboratory sheets. Determination ofphysical properties

PAI/11

BS EN 12497:2005Paper and board. Paper and board intended tocome into contact with foodstuffs.Determination of mercury in an aqueous extract

CW/47

BS EN 12498:2005Paper and board. Paper and board intended tocome into contact with foodstuffs.Determination of cadmium and lead in anaqueous extract

CW/47

BS EN ISO 12625-3:2005Tissue paper and tissue products. Determinationof thickness, bulking thickness and apparentbulk density

PAI/11

BS EN ISO 12625-4:2005Tissue paper and tissue products. Determinationof tensile strength, stretch at break and tensileenergy absorption

PAI/11

BS EN ISO 12625-5:2005Tissue paper and tissue products. Determinationof wet tensile strength

PAI/11

BS EN ISO 12625-9:2005Tissue paper and tissue products. Determinationof ball burst strength

PAI/11

BS EN 14719:2005Pulp, paper and board. Determination of thediisopropylnaphthalene (DIPN) content bysolvent extraction

PAI/11

BS EN ISO 15755:2000Paper and board. Estimation of contraries

PAI/11

BS ISO/IEC 19794-2:2005+A1:2010Information technology. Biometric datainterchange formats. Finger minutiae data


IST/44


SPECIAL ANNOUNCEMENTS

Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000

BS 7001:1988Specification for interchangeability and safetyof a standardized luminaire supporting coupler

This standard has been re-instated as it waswithdrawn in error in November 2007. Thestandard should have been confirmed.Contact: Bob StrattonEmail: [email protected]

PEL/23

BRITISH STANDARDSREVIEWED ANDCONFIRMED

It is BSI policy for every standard to bereviewed by the technical committeeresponsible not more than five years afterpublication, to establish whether it is stillcurrent and, if it is not, to identify and setin hand appropriate action.

Confirmation indicates the continuingcurrency of a standard.

Where any standard in this list has beenamended since publication, confirmationincludes all amendments published todate. Reference to a particularamendment indicates that it is publishedconcurrently with the confirmation.

BS 4656-34:1985Accuracy of machine tools and methods of test.Specification for power presses, mechanicalopen front type

MTE/1

BS 5550-2.11.2:1980Cinematography. 16 mm film. Spindles.Specification for dimensions of precision gradespindles for 16 mm cinematograph equipmentand telecine machines

CPW/36

BS 6590:1985Specification for capacity ratings anddimensions of power presses, mechanical openfront type

MTE/1

BS EN 61000-4-4:2004+A1:2010Electromagnetic compatibility (EMC). Testingand measurement techniques. Electrical fasttransient/burst immunity test


GEL/210/12

Also incorporates Corrigenda 1 & 2

BS EN 61000-4-17:1999+A2:2009Electromagnetic compatibility (EMC). Testingand measurement techniques. Ripple on D.C.input power port immunity test


GEL/210/12


BS EN 61347-2-10:2001+A1:2009Lamp controlgear. Particular requirements forelectronic invertors and convertors for high-frequency operation of cold tubular dischargelamps (neon tubes)


CPL/34/3

BS ISO/IEC 14763-3:2006+A1:2009Information technology. Implementation andoperation of customer premises cabling. Testingof optical fibre cabling


TCT/7

BS ISO/IEC 18033-4:2005+A1:2009Information technology. Security techniques.Encryption algorithms. Stream ciphers


IST/33

BS ISO/IEC 19785-1:2006+A1:2010Information technology. Common biometricexchange formats framework. Data elementspecification


IST/44

BS ISO/IEC 19785-2:2006+A1:2010Information technology. Common biometricexchange formats framework. Procedures forthe operation of the biometric registrationauthority


IST/44

BS ISO/IEC 19785-3:2007+A1:2010Information technology. Common biometricexchange formats framework. Patron formatspecifications


IST/44

Updated British Standards continued...


BS 4875-1:2007Strength and stability of furniture.Requirements for the strength and durability ofthe structure of domestic seating

FW/0

Superseded by BS EN 12520:2010

BS 5589:1989Code of practice for preservation of timber

B/515

This standard has been withdrawn after a period ofobsolescence as the UK consider that there is nolonger a need in UK industry

BS 5660-1:1987Methods of sampling iron ores. Manual methodof increment sampling

ISE/58

This standard has been withdrawn as thecorresponding International Standard,ISO 3081:1986 has been withdrawn

BS 5661:1987Method for preparation of samples of iron oresby manual means

ISE/58


BS 5662-1:1987Evaluation of sampling methods for iron ores.Experimental methods for evaluation of qualityvariation

ISE/58


BS 6200-3.26.1:1995Sampling and analysis of iron, steel and otherferrous metals. Methods of analysis.Determination of silicon. Steel and iron:gravimetric method

ISE/102

Superseded by BS EN ISO 439:2010

DD 8431:2005Electrical static meters for secondary meteringand sub-metering. Specification

PEL/13

Superseded by BS 8431:2010

BS EN 999:1998+A1:2008Safety of machinery. The positioning ofprotective equipment in respect of approachspeeds of parts of the human body

MCE/3


BS EN 1967:2002Structural adhesives. Evaluation of theeffectiveness of surface treatment techniquesfor aluminium using a wet peel test inassociation with the floating roller method

PRI/52


BRITISH STANDARDSPROPOSED FORWITHDRAWAL

A note of any objections to thesewithdrawals should be sent to DebbieStead, Head of Committee Service Centre– Operations, BSI Head Office, 389Chiswick High Road, London W4 4AL orvia email [email protected] by31 August, 2010.

Where any standard in this list has beenamended since publication, a proposal towithdraw also includes all amendmentspublished to date.

BS 2618:1975Specification for electric traction equipment

GEL/9

This standard has been proposed for withdrawal asit conflicts with BS EN 60077-2:2002

BS EN ISO 8502-10:2004(BS 7079-B10:2004)Preparation of steel substrates beforeapplication of paints and related products. Testsfor the assessment of surface cleanliness. Fieldmethod for the titrimetric determination ofwater-soluble chloride

STI/21

This standard has been proposed for withdrawal asthe corresponding CEN and ISO standards have beenwithdrawn

BRITISH STANDARDSWITHDRAWN

If any standard in this list has beenamended since publication, allamendments published to date are alsowithdrawn

BS 3900-0:1989Methods of test for paints. General introduction

STI/10

Superseded by BS 3900-0:2010 andBS EN 23270:1991

BS 4317-15:1981Methods of test for cereals and pulses.Determination of moisture content of maize(milled and whole)

AW/4


BS 4585-16:1990Methods of test for spices and condiments.Determination of total natural colouring mattercontent of ground (powdered) paprika

AW/7


BS EN ISO 16000-5:2007Indoor air. Sampling strategy for volatileorganic compounds (VOCs)

EH/2/3

BS EN 20535:1994Paper and board. Determination of waterabsorptiveness. Cobb method

PAI/11

BS EN 27213:1993Method for sampling pulps for testing

PAI/11

BRITISH STANDARDSDECLARED OBSOLESCENT

Declaration of obsolescence indicates thatthe standard is not recommended for usein new equipment but needs to beretained for the servicing of existingequipment that is expected to have along working life.

BS 2S 510:1970Specification for carbon steel sheet and strip(430/540 MPa) (suitable for welding)

ACE/61/-/15

An ACE/61/-/15 member has informed CommitteeService Centre that this standard has beenobsolescent for many years but a discrepancyappears to have occurred as the result of the reviewrequest (ACE/61/-/15/_07_0026) issued to ACE/61/-/15 in March 2007 indicating that the status at thetime was ‘current’ rather than ‘obsolescent’ and, asa result of the review, this standard was incorrectlyconfirmed as current rather than obsolescent

BS 2S 511:1970Specification for deep drawing carbon steelsheet and strip (280/400 MPa) (suitable forwelding)

ACE/61/-/15


BS 2S 514:1969Specification for carbon-manganese steel sheetand strip (for use in the hardened andtempered condition: 770/1000 MPa) (suitablefor welding)

ACE/61/-/15



BS IEC 62265:2005Advanced library format (ALF) describingintegrated circuit (IC) technology, cells andblocks

GEL/93

This standard has been withdrawn as the IECstandard will be withdrawn on 31 July, 2010

PD CR R210-010:2002Electromagnetic compatibility. Emissionmeasurements in fully anechoic chambers

GEL/210/12

Superseded by PD CLC/TR 50485:2010

BS TA 57:1974Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength1030-1220 MPa) (maximum thickness 65 mm)

ACE/61/-/49

Superseded by BS 2TA 57:2009 andBS EN 3459:2010

BRITISH STANDARDS UNDERREVIEW

The following British Standardsimplement International and/or EuropeanStandards which are currently underreview to see if they should be confirmed,revised or withdrawn.

Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL or via email [email protected] by31 August, 2010, in order to beconsidered by the relevantUK Committee.

BS 3318:1978(ISO 5005:1977)Specification for earth-moving machinery.Method for locating the centre of gravity

B/513/1

BS 5586-1:1978(ISO 3591:1977)Sensory analysis apparatus. Specification forwine-tasting glass

AW/12

BS 6068-2.69:2000(ISO 15089:2000)Water quality. Physical, chemical andbiochemical methods. Guidelines for selectiveimmunoassays for the determination of planttreatment and pesticide agents

EH/3/2

BS 6068-6.12:1996(ISO 5667-12:1995)Water quality. Sampling. Guidance on samplingof bottom sediments

EH/3/6

BS EN 50241-2:1999Specification for open path apparatus for thedetection of combustible or toxic gases andvapours. Performance requirements forapparatus for the detection of combustiblegases

GEL/31/19

Superseded by BS EN 60079-29-4:2010

BS EN 60079-1:2004Electrical apparatus for explosive gasatmospheres. Flameproof enclosures ’d’

GEL/31/X

Superseded by BS EN 60079-1:2007

BS EN 60095-2:1993Lead-acid starter batteries. Dimensions ofbatteries and dimensions and marking ofterminals

PEL/21


BS EN 60947-1:2004Specification for low-voltage switchgear andcontrolgear. General rules

PEL/17/2


BS EN 62439:2008High availability automation networks

AMT/7

Superseded by BS EN 62439-1:2010, BS EN 62439-2:2010, BS EN 62439-3:2010, BS EN 62439-4:2010,BS EN 62439-5:2010 and BS EN 62439-6:2010

BS IEC 61111:1992Matting of insulating material for electricalpurposes

PEL/78


BS IEC 61112:1992Blankets of insulating material for electricalpurposes

PEL/78


BS IEC 61691-5:2004Behavioural languages. VITALASIC (applicationspecific integrated circuit) modelingspecification

GEL/93


BS IEC 62050:2005VHDL register transfer level (RTL) synthesis

GEL/93


BS IEC 62142:2005Standard for Verilog register transfer levelsynthesis

GEL/93


BS EN ISO 7284:1996Resistance welding equipment. Particularspecifications applicable to transformers withtwo separate secondary windings for multi-spotwelding as used in the automobile industry

WEE/29

This standard has been withdrawn as thecorresponding ISO standard, ISO 7284:1993 hasbeen withdrawn in November 2009 and BSI havenow received approval for the withdrawal of theEuropean Standard EN ISO 7284:1996 from theCEN committee CEN/TC 121

BS EN ISO 8729:1999Ships and marine technology. Marine radarreflectors

EPL/80

Superseded by BS ISO 8729-1:2010

DD ENV 12520:2000Domestic furniture. Seating. Mechanical andstructural safety requirements

FW/0


BS EN 12748:1999Footwear. Test methods for outsoles, insoles,linings and insocks. Water soluble content

TCI/69


DD CEN/TS 15705:2009Fertilizers. Determination of urea condensatesusing high-performance liquid chromotography(HPLC). Isobutylidenediurea andcrotonylidenediurea (method A) and methylen-urea oligomers (method B)

CII/37


BS EN 23369:1993Impermeable sintered metal materials andhardmetals. Determination of density

ISE/65


BS EN 23923-1:1993Metallic powders. Determination of apparentdensity. Funnel method

ISE/65

Superseded by BS EN ISO 3923-1:2010

BS EN 50085-1:1999Cable trunking and cable ducting systems forelectrical installations. General requirements

PEL/213

This standard has been withdrawn as it wassuperseded by BS EN 50085-2:2005 but remainedcurrent until BS EN 50085-2-3 had been alignedwith the 2005 edition of Part 1. This alignment hasnow been completed, consequently BS EN 50085-1:1999 has now been withdrawn

BS EN 50241-1:1999Specification for open path apparatus for thedetection of combustible or toxic gases andvapours. General requirements and testmethods

GEL/31/19

Superseded by BS EN 60079-29-4:2010

British Standards Withdrawn continued...


BS EN 862:2005Packaging. Child resistant packaging.Requirements and testing procedures for non-reclosable packages for non-pharmaceuticalproducts

PKW/0

BS EN 986:2005Textile floor coverings. Tiles. Determination ofdimensional changes due to the effects ofvaried water and heat conditions and distortionout of plane

PRI/3

BS EN 1081:1998Resilient floor coverings. Determination of theelectrical resistance

PRI/60

BS EN 1318:2005Textile floor coverings. Determination of theapparent effective thickness of the backing

PRI/3

BS EN 1814:2005Textile floor coverings. Determination ofresistance to damage at cut edges using themodified Vettermann drum test

PRI/3

BS EN 1815:1998Resilient and textile floor coverings. Assessmentof static electrical propensity

PRI/60

BS EN 1818:1999Resilient floor coverings. Determination of theeffect of loaded heavy duty castors

PRI/60

BS EN ISO 6326-1:2009Natural gas. Determination of sulfurcompounds. General introduction

PTI/15

BS EN ISO 6520-1:2007Welding and allied processes. Classification ofgeometric imperfections in metallic materials.Fusion welding

WEE/1

BS EN ISO 7346-1:1998(BS 6068-5.2:1998)Water quality. Determination of the acutelethal toxicity of substances to a freshwater fish[Brachydanio rerio Hamilton-Buchanan(Teleostei, Cyprinidae)]. Static method

EH/3/5

BS EN ISO 7346-2:1998(BS 6068-5.3:1998)Water quality. Determination of the acutelethal toxicity of substances to a freshwater fish[Brachydanio rerio Hamilton-Buchanan(Teleostei, Cyprinidae)]. Semi-static method

EH/3/5

BS EN 430:1994Resilient floor coverings. Determination of massper unit area

PRI/60

BS EN 431:1994Resilient floor coverings. Determination of peelresistance

PRI/60

BS EN 432:1994Resilient floor coverings. Determination ofshear force

PRI/60

BS EN 433:1994Resilient floor coverings. Determination ofresidual indentation after static loading

PRI/60

BS EN 434:1994Resilient floor coverings. Determination ofdimensional stability and curling after exposureto heat

PRI/60

BS EN 435:1994Resilient floor coverings. Determination offlexibility

PRI/60

BS EN 436:1994Resilient floor coverings. Determination ofdensity

PRI/60

BS EN 661:1995Resilient floor coverings. Determination of thespreading of water

PRI/60

BS EN 662:1995Resilient floor coverings. Determination ofcurling on exposure to moisture

PRI/60

BS EN 663:1995Resilient floor coverings. Determination ofconventional pattern depths

PRI/60

BS EN 664:1995Resilient floor coverings. Determination ofvolatile loss

PRI/60

BS EN 665:1995Resilient floor coverings. Determination ofexudation of plasticizers

PRI/60

BS EN 666:1995Resilient floor coverings. Determination ofgelling

PRI/60

BS 6074:1981(ISO 6485:1980)Method for determination of the volumetricrating of tractor-scrapers for earth-movingmachinery

B/513/1

BS 6113:1981(ISO 6483:1980)Method for volumetric rating of dumper bodiesused for earth-moving

B/513/1

BS 6911-9:1993(ISO 10268:1993)Testing earth-moving machinery. Verification ofretarder capability of dumpers and tractor-scrapers

B/513/1

BS 6911-10:1996(ISO 10532:1995)Testing earth-moving machinery. Machine-mounted retrieval device. Performancerequirements

B/513/1

BS 7140:1995(ISO 7960:1995)Airborne noise emitted by woodworkingmachine tools. Operating conditions forwoodworking machines

MTE/1

BS EN 209:2000Steel drums. Removable head (open head)drums with a minimum total capacity of 210 l

PKW/0

BS EN 210:2000Steel drums. Non-removable head (tight head)drums with a minimum total capacity of 216,5 l

PKW/0

BS EN 426:1993Resilient floor coverings. Determination ofwidth, length, straightness and flatness of sheetmaterial

PRI/60

BS EN 427:1994Resilient floor coverings. Determination of theside length, squareness and straightness of tiles

PRI/60

BS EN 428:1993Resilient floor coverings. Determination ofoverall thickness

PRI/60

BS EN 429:1993Resilient floor coverings. Determination of thethickness of layers

PRI/60


BS EN ISO 11290-2:1998+A1:2004Microbiology of food and animal feeding stuffs.Horizontal method for the detection andenumeration of Listeria monocytogenes.Enumeration method

AW/9

BS EN ISO 11499:2007Dentistry. Single-use cartridges for localanaesthetics

CH/106/4

BS EN ISO 11890-1:2007Paints and varnishes. Determination of volatileorganic compound (VOC) content. Differencemethod

STI/10

BS EN 12103:1999Resilient floor coverings. Agglomerated corkunderlays. Specification

PRI/60

BS EN 12104:2000Resilient floor coverings. Cork floor tiles.Specification

PRI/60

BS EN 12105:1998Resilient floor coverings. Determination ofmoisture content of agglomerated compositioncork

PRI/60

BS EN 12377:1999Packaging. Flexible tubes. Test method for theairtightness of closures

PKW/0

BS EN 12455:1999Resilient floor coverings. Specification forcorkment underlay

PRI/60

BS EN 12674-1:1999Roll containers. Terminology

PKW/0

BS EN 12708:2000Plug/bung closure systems for plastics containerswith a nominal capacity of 20 l to 225 l

PKW/0

BS EN 12709:2000Plastic drums. Non-removable head (tight head)circular cross-section drums with a nominalcapacity of 20 l to 120 l

PKW/0

BS EN 12711:2000Steel drums. Non-removable head (tight head)drums with a minimum total capacity of 230 l

PKW/0

BS EN ISO 9241-9:2000Ergonomic requirements for office work withvisual display terminals (VDTs). Requirementsfor non-keyboard input devices

PH/9

BS EN ISO 9308-3:1999(BS 6068-4.10:1999)Water quality. Detection and enumeration ofEscherichia Coli and coliform bacteria in surfaceand waste water. Miniaturized method (mostprobable number) for the detection andenumeration of E. coli in surface and wastewater

EH/3/4

BS EN ISO 9377-2:2000(BS 6068-2.72:2000)Water quality. Determination of hydrocarbonoil index. Method using solvent extraction andgas chromatography

EH/3/2

BS EN ISO 9680:2007Dentistry. Operating lights

CH/106/4

BS EN ISO 9920:2009Ergonomics of the thermal environment.Estimation of thermal insulation and watervapour resistance of a clothing ensemble

PH/9/1

BS EN ISO 10695:2000Water quality. Determination of selectedorganic nitrogen and phosphorus compounds.Gas chromatographic methods

EH/3/2

BS EN ISO 10705-2:2001(BS 6068-4.13:2000)Water quality. Detection and enumeration ofbacteriophages. Enumeration of somaticcoliphages

EH/3/4

BS EN ISO 10993-6:2009Biological evaluation of medical devices. Testsfor local effects after implantation

CH/194

BS EN ISO 11064-1:2001Ergonomic design of control centres. Principlesfor the design of control centres

PH/9

BS EN ISO 11064-2:2001Ergonomic design of control centres. Principlesfor the arrangement of control suites

PH/9

BS EN ISO 11290-1:1996+A1:2004(BS 5763-18:1997)Microbiology of food and animal feeding stuffs.Horizontal method for the detection andenumeration of Listeria monocytogenes.Detection method

AW/9

BS EN ISO 7396-2:2007Medical gas pipeline systems. Anaesthetic gasscavenging disposal systems

CH/121/6

BS EN ISO 7899-1:1999(BS 6068-4.3:1999)Water quality. Detection and enumeration ofintestinal enterococci in surface and wastewater. Miniaturized method (most probablenumber) for surface and waste water

EH/3/4

BS EN ISO 7899-2:2000(BS 6068-4.4:2000)Water quality. Detection and enumeration ofintestinal enterococci in surface and wastewater. Membrane filtration method

EH/3/4

BS EN ISO 8062-1:2007Geometrical product specifications (GPS).Dimensional and geometrical tolerances formoulded parts. Vocabulary

TDW/4

BS EN ISO 8062-3:2007Geometrical product specifications (GPS).Dimensional and geometrical tolerances formoulded parts. General dimensional andgeometrical tolerances and machiningallowances for castings

TDW/4

BS EN ISO 8185:2009Respiratory tract humidifiers for medical use.Particular requirements for respiratoryhumidification systems

CH/121/5

BS EN ISO 8748:2007Spring-type straight pins. Coiled, heavy duty

FME/9/3

BS EN ISO 8750:2007Spring-type straight pins. Coiled, standard duty

FME/9/3

BS EN ISO 8751:2007Spring-type straight pins. Coiled, light duty

FME/9/3

BS EN ISO 8936:2009Awnings for leisure accommodation vehicles.Requirements and test methods

SW/136

BS EN ISO 9073-18:2008Textiles. Test methods for nonwovens.Determination of breaking strength andelongation of nonwoven materials using thegrab tensile test

TCI/24

BS EN ISO 9185:2007Protective clothing. Assessment of resistance ofmaterials to molten metal splash

PH/3/2

British Standards Under Review continued...


BS EN 13845:2005Resilient floor coverings. Polyvinyl chloride floorcoverings with particle based enhanced slipresistance. Specification

PRI/60

BS EN 14067-1:2003Railway applications. Aerodynamics. Symbolsand units

RAE/1/-/4

BS EN 14067-2:2003Railway applications. Aerodynamics.Aerodynamics on open track

RAE/1/-/4

BS EN 14067-3:2003Railway applications. Aerodynamics.Aerodynamics in tunnels

RAE/1/-/4

BS EN 14067-4:2005+A1:2009Railway applications. Aerodynamics.Requirements and test procedures foraerodynamics on open track

RAE/1/-/4

BS EN 14363:2005Railway applications. Testing for the acceptanceof running characteristics of railway vehicles.Testing of running behavior and stationary tests

RAE/1/-/8

BS EN 14521:2004Resilient floor coverings. Specification forsmooth rubber floor coverings with or withoutfoam backing with a decorative layer

PRI/60

BS EN 14565:2004Resilient floor coverings. Floor coverings basedupon synthetic thermoplastic polymers.Specification

PRI/60

BS EN ISO 14577-4:2007Metallic materials. Instrumented indentationtest for hardness and materials parameters. Testmethod for metallic and non-metallic coatings

ISE/NFE/4/5

BS EN 14798:2005Glass packaging. Hand-held crown bottleopeners. Dimensions

PKW/0

BS EN 14847:2005Aerosol containers. Tinplate containers.Dimensions of the 25, 4 mm (one inch) aperture

PKW/0

BS EN 14848:2005Aerosol containers. Metal containers with 25,4mm aperture. Dimensions of valve cups

PKW/0

BS EN 13117-2:2000Transport packaging. Reusable, rigid plasticsdistribution boxes. General specifications fortesting

PKW/0

BS EN 13129-2:2004Railway applications. Air conditioning for mainline rolling stock. Type tests

RAE/1/-/6

BS EN 13199-1:2000Packaging. Small load carrier systems. Commonrequirements and test methods

PKW/0

BS EN 13199-2:2000Packaging. Small load carrier systems. ColumnStackable System (CSS)

PKW/0

BS EN 13199-3:2000Packaging. Small load carrier systems. BondStackable System (BSS)

PKW/0

BS EN ISO 13295:2007Dentistry. Mandrels for rotary instruments

CH/106/4

BS EN 13775-1:2003Railway applications. Measuring of new andmodified freight wagons. Measuring principles

RAE/1/-/9

BS EN 13775-2:2003Railway applications. Measuring of new andmodified freight wagons. Freight wagons withbogies

RAE/1/-/9

BS EN 13775-3:2003Railway applications. Measuring of new andmodified freight wagons. Freight wagons with2 wheelsets

RAE/1/-/9

BS EN 13775-4:2004Railway applications. Measuring of new andmodified freight wagons. Bogies with 2wheelsets

RAE/1/-/9

BS EN 13775-5:2004Railway applications. Measuring of new andmodified freight wagons. Bogies with 3wheelsets

RAE/1/-/9

BS EN 13775-6:2004Railway applications. Measuring of new andmodified freight wagons. Multiple andarticulated freight wagons

RAE/1/-/9

BS EN 12712:2000Plastics jerricans. Jerricans with a nominalcapacity of 20 l to 60 l for optimal utilization ofpallet sizes 800 mm x 1200 mm, 1000 mm x1200 mm and 1140 mm x 1140 mm

PKW/0

BS EN 12713:2000Screw cap closure systems for plastics containerswith a nominal capacity of 20 L to 60 L

PKW/0

BS EN 12726:2000Packaging. Cork mouth finish with a borediameter of 18,5 mm for corks and tamperevident capsules

PKW/0

BS EN 12928:2000Inserted flange type closure systems for steeldrums with a total capacity of 17 l to 230 l

PKW/0

BS EN 13007:2000Steel drums. Non-removable head (tight head)drums with a nominal capacity of 20 l to 60 l

PKW/0

BS EN 13008:2000Steel drums. Removable head (open head)drums with a nominal capacity of 15 l to 62 l

PKW/0

BS EN 13025-1:2005Packaging. Light gauge metal containers.Nominal filling volumes for round, cylindricaland tapered general use metal containers up to40000 ml

PKW/0

BS EN 13025-2:2005Packaging. Light gauge metal containers. Non-removable head (tight head) round steel andtinplate containers with a nominal capacity of20000 ml, 25000 ml and 30000 ml

PKW/0

BS EN 13025-3:2005Packaging. Light gauge metal containers.Removable head (open head) round steel andtinplate containers with a nominal capacity of20000 ml, 25000 ml and 30000 ml

PKW/0

BS EN 13046:2000Packaging. Flexible cylindrical metallic tubes.Dimensions and tolerances

PKW/0

BS EN 13047:2000Packaging. Flexible conical metallic tubes.Dimensions and tolerances

PKW/0

BS EN 13117-1:2000Transport packaging. Reusable, rigid plasticsdistribution boxes. General purpose application

PKW/0


BS ISO 2834-2:2007Graphic technology. Laboratory preparation oftest prints. Liquid printing inks

PAI/43

BS ISO 2846-2:2007Graphic technology. Colour and transparency ofprinting ink sets for four-colour printing.Coldset offset lithographic printing

PAI/43

BS ISO 2846-4:2000Graphic technology. Colour and transparency ofink sets for four-colour-printing. Screen printing

PAI/43

BS ISO 3116:2007Magnesium and magnesium alloys. Wroughtmagnesium alloys

NFE/35

BS ISO 3455:2007Hydrometry. Calibration of current-meters instraight open tanks

CPI/113/5

BS ISO 3739-1:2007Industrial tyres and rims. Pneumatic tyres(metric series) on 5º tapered on flat base rims.Designation, dimensions and marking

AUE/4

BS ISO 4000-2:2007Passenger car tyres and rims. Rims

AUE/4

BS ISO 4037-3:1999X and gamma reference radiation forcalibrating dosemeters and doserate meters andfor determining their response as a function ofphoton energy. Calibration of area andpersonal dosemeters and the measurement oftheir response as a function of energy and

NCE/2

BS ISO 4366:2007Hydrometry. Echo sounders for water depthmeasurements

CPI/113/5

BS ISO 7176-26:2007Wheelchairs. Vocabulary

CH/173/1

BS ISO 8529-2:2000Reference neutron radiations. Calibrationfundamentals of radiation protection devicesrelated to the basic quantities characterizingthe radiation field

NCE/2

BS ISO 8529-3:1998Reference neutron radiations. Calibration ofarea and personal dosimeters anddetermination of their response as a function ofneutron energy and angle of incidence

NCE/2

BS EN ISO 15913:2003Water quality. Determination of selectedphenoxyalkanoic herbicides, includingbentazones and hydroxybenzonitriles by gaschromatography and mass spectrometry aftersolid phase extraction and derivatization

EH/3/2

BS EN ISO/IEC 17025:2005General requirements for the competence oftesting and calibration laboratories

CAS/1

BS EN ISO 19493:2007Water quality. Guidance on marine biologicalsurveys of hard-substrate communities

EH/3/5

BS EN ISO 20743:2007Textiles. Determination of antibacterial activityof antibacterial finished products

TCI/80

BS EN ISO 20776-2:2007Clinical laboratory testing and in vitrodiagnostic test systems. Susceptibility testing ofinfectious agents and evaluation ofperformance of antimicrobial susceptibility testdevices. Evaluation of performance ofantimicrobial susceptibility test device

CH/212

BS EN ISO 21606:2007Dentistry. Elastomeric auxiliaries for use inorthodontics

CH/106/1

BS EN ISO 24014-1:2007Public transport. Interoperable faremanagement system. Architecture

EPL/278

BS EN 26461-1:1993(BS 6068-4.8:1993)Water quality. Detection and enumeration ofthe spores of sulfite-reducing anaerobes(Clostridia). Method by enrichment in a liquidmedium

EH/3

BS EN ISO 80000-8:2007Quantities and units. Acoustics

EH/1

BS ISO 230-5:2000Test code for machine tools. Determination ofthe noise emission

MTE/1

BS ISO 1088:2007Hydrometry. Velocity-area methods usingcurrent-meters. Collection and processing ofdata for determination of uncertainties in flowmeasurement

CPI/113/5

BS ISO 2537:2007Hydrometry. Rotating-element current-meters

CPI/113/5

BS EN 14849:2005Aerosol containers. Glass containers. Dimensionsof aerosol valve ferrules

PKW/0

BS EN 14850:2005Aerosol containers. Metal containers with 25,4mm aperture. Measurement of contact height

PKW/0

BS EN 14854:2005Aerosol containers. Glass containers. Dimensionsof the neck finish

PKW/0

BS EN 14867:2005Packaging. Plastic freezer bags. Specificationsand test methods

PKW/0

BS EN 14887:2005Glass packaging. Cork removal devices. Generalrequirements

PKW/0

BS EN 14900:2006Textile floor coverings. Determination of thedensity of the textile fleece backing

PRI/3

BS EN 15016-1:2004Technical drawings. Railway applications.General Principles

RAE/1

BS EN 15016-2:2004Technical drawings. Railway applications. Partslists

RAE/1

BS EN 15016-3:2004Technical drawings. Railway applications.Handling of modifications of technicaldocuments

RAE/1

BS EN 15016-4:2006Technical drawings. Railway applications. Dataexchange

RAE/1

BS EN ISO 15025:2002Protective clothing. Protection against heat andflame. Method of test for limited flame spread

PH/3/2

BS EN ISO 15614-7:2007Specification and qualification of weldingprocedures for metallic materials. Weldingprocedure test. Overlay welding

WEE/36

BS EN ISO 15682:2001(BS 6068-2.71:2000)Water quality. Determination of chloride byflow analysis (CFA and FIA) and photometric orpotentiometric detection

EH/3/2



BS ISO 17713-1:2007Meteorology. Wind measurements. Wind tunneltest methods for rotating anemometerperformance

EH/2

BS ISO 17714:2007Meteorology. Air temperature measurements.Test methods for comparing the performanceof thermometer shields/screens and definingimportant characteristics

EH/2

BS ISO/IEC 19501:2005Information technology. Open distributedprocessing. Unified modeling language (UML).Version 1.4.2

IST/15

BS ISO 19933:2007Space systems. Format for spacecraft launchenvironment test report

ACE/68/-/2

BS ISO 20473:2007Optics and photonics. Spectral bands

CPW/172

BS ISO 20672:2007Ships and marine technology. Rate of turnindicators

EPL/80

BS ISO 20673:2007Ships and marine technology. Electric rudderangle indicators

EPL/80

BS ISO 21238:2007Nuclear energy. Nuclear fuel technology.Scaling factor method to determine theradioactivity of low and intermediate-levelradioactive waste packages generated atnuclear power plants

NCE/9

BS ISO 21348:2007Space environment (natural and artificial).Process for determining solar irradiances

ACE/68/-/4

BS ISO 21501-2:2007Determination of particle size distribution.Single particle light interaction methods. Lightscattering liquid-borne particle counter

LBI/37

BS ISO 21501-3:2007Determination of particle size distribution.Single particle light interaction methods. Lightextinction liquid-borne particle counter

LBI/37

BS ISO 21501-4:2007Determination of particle size distribution.Single particle light interaction methods. Lightscattering airborne particle counter for cleanspaces

LBI/37

BS ISO 14065:2007Greenhouse gases. Requirements forgreenhouse gas validation and verificationbodies for use in accreditation or other forms ofrecognition

SES/1/7

BS ISO 15396:2007Space data and information transfer systems.Cross support reference model. Space linkextension services

ACE/68/-/7

PD ISO/IEC TR 15443-1:2005Information technology. Security techniques. Aframework for IT security assurance. Overviewand framework

IST/33

PD ISO/IEC TR 15443-2:2005Information technology. Security techniques. Aframework for IT security assurance. Assurancemethods

IST/33

BS ISO 15901-3:2007Pore size distribution and porosity of solidmaterials by mercury porosimetry and gasadsorption. Analysis of micropores by gasadsorption

LBI/37

BS ISO 16000-8:2007Indoor air. Determination of local mean ages ofair in buildings for characterizing ventilationconditions

EH/2/3

BS ISO 16528-1:2007Boilers and pressure vessels. Performancerequirements

PVE/-/1

BS ISO 16528-2:2007Boilers and pressure vessels. Procedures forfulfilling the requirements of ISO 16528-1

PVE/-/1

BS ISO 16883:2007Packaging. Transport packages for dangerousgoods. Test methods for large packagings

PKW/0

BS ISO 17493:2000Clothing and equipment for protection againstheat. Test method for convective heatresistance using a hot air circulating oven

PH/3/2

BS ISO 17593:2007Clinical laboratory testing and in vitro medicaldevices. Requirements for in vitro monitoringsystems for self-testing of oral anticoagulanttherapy

CH/212

BS ISO 8568:2007Mechanical shock. Testing machines.Characteristics and performance

GME/21/2

BS ISO 9230:2007Information and documentation. Determinationof price indexes for print and electronic mediapurchased by libraries

IDT/2/15

BS ISO 9459-5:2007Solar heating. Domestic water heating systems.System performance characterization by meansof whole-system tests and computer simulation

RHE/25

BS ISO 10110-12:2007Optics and photonics. Preparation of drawingsfor optical elements and systems. Asphericsurfaces

CPW/172

BS ISO 10275:2007Metallic materials. Sheet and strip.Determination of tensile strain hardeningexponent

ISE/NFE/4/1

BS ISO 10294-2:1999Fire-resistance tests. Fire dampers for airdistribution systems. Classification, criteria andfield of application of test results

FSH/22/4

BS ISO 10295-1:2007Fire tests for building elements andcomponents. Fire testing of service installations.Penetration seals

FSH/22/3

BS ISO 11843-2:2000Capability of detection. Methodology in thelinear calibration case

SS/6

BS ISO 12006-3:2007Building construction. Organization ofinformation about construction works.Framework for object-oriented information

B/555

BS ISO 12640-3:2007Graphic technology. Prepress digital dataexchange. CIELAB standard colour image data(CIELAB/SCID)

PAI/43

BS ISO 13656:2000Graphic technology. Application of reflectiondensitometry and colorimetry to process controlor evaluation of prints and proofs

PAI/43


BS 2000-223 (Revision)Methods of test for petroleum and its products.Determination of ash of petroleum productscontaining mineral matter

will supersede BS 2000-223:1993

PTI/2

BS 2000-306 (Revision)Methods of test for petroleum and its products.Determination of oxidation stability of straightmineral oil


PTI/2

BS 2000-455 (Revision)Methods of test for petroleum and its products.Determination of manganese in gasoline.Atomic absorption spectrometry (AAS) method


PTI/2

BS 5395-4Code of practice for the design of limited accessstairs

B/208

BS 5655-6 (Revision)Lifts and service lifts. Code of practice for theselection and installation of new lifts


MHE/4

BS 6700 (Revision)Design, installation, testing and maintenance ofservices supplying water for domestic use withinbuildings and their curtilages. Specification

will supersede BS 6700:2006+A1:2009

B/504/2

BS 7255 (Revision)Code of practice for safe working on lifts

will supersede BS 7255:2001

MHE/4

BS 7371-8 (Revision)Coatings on metal fasteners. Specification forsherardized coatings


FME/9/1

BS 7801 (Revision)Escalators and moving walks. Code of practicefor safe working on escalators and movingwalks


MHE/4

BS 7909 (Revision)Code of practice for temporary electricalsystems for entertainment and related purposes


CPW/4

NEW WORK STARTED

The reference number of the committeeresponsible for each item of new workstarted is given after each entry.

Where a work item has the temporarydesignation “BS EN XXXX”, it has not yetbeen allocated a standard number by theEuropean standards body.

BS XXXXCorporate governance. Guidance

RM/1

BS 2A 241:2005/Amendment 2General requirements for steel protruding-headbolts of tensile strength 1250 MPa (180000lbf/in2) or greater. Specification

ACE/12

BS 598Specification for testing asphalt

B/510/1

BS 2000-10 (Revision)Methods of test for petroleum and its products.Determination of kerosine burningcharacteristics. 24 hour method


PTI/2

BS 2000-12 (Revision)Methods of test for petroleum and its products.Determination of specific energy


PTI/2

BS 2000-19 (Revision)Methods of test for petroleum and its products.Determination of demulsibility characteristics oflubricating oil


PTI/2

BS 2000-48 (Revision)Methods of test for petroleum and its products.Determination of oxidation characteristics oflubricating oil


PTI/2

BS 2000-137 (Revision)Methods of test for petroleum and its products.Determination of oil content of water mixmetalworking oil dilutions


PTI/2

BS 2000-213 (Revision)Methods of test for petroleum and its products.Determination of neutralization value ofbitumen. Colour indicator titration method


PTI/2

DD ISO/TS 21872-1:2007Microbiology of food and animal feeding stuffs.Horizontal method for the detection ofpotentially enteropathogenic Vibrio spp.Detection of Vibrio parahaemolyticus andVibrio cholerae

AW/9

DD ISO/TS 21872-2:2007Microbiology of food and animal feeding stuffs.Horizontal method for the detection ofpotentially enteropathogenic Vibrio spp.Detection of species other than Vibrioparahaemolyticus and Vibrio cholerae

AW/9

BS ISO 22891:2007Paper. Determination of transmittance bydiffuse reflectance measurement

PAI/11

BS ISO 23470:2007Soil quality. Determination of effective cationexchange capacity (CEC) and exchangeablecations using a hexamminecobalt trichloridesolution

EH/4

BS ISO 24531:2007Intelligent transport systems. Systemarchitecture, taxonomy and terminology. UsingXML in ITS standards, data registries and datadictionaries

EPL/278

BS ISO/IEC 27002:2005Information technology. Security techniques.Code of practice for information securitymanagement

IST/33

BS IEC 62526:2007Standard for extensions to standard testinterface language (STIL) for semiconductordesign environments

GEL/93

BS IEC 62528:2007Standard testability method for embeddedcore-based integrated circuits

GEL/93

BS ISO 80000-5:2007Quantities and units. Thermodynamics

SS/7



Please

do not send

confirmation

of

orders placed by

telephone

as it can lead to

duplication

BS EN 12101-8Smoke and heat control systems. Smoke controldampers

FSH/25

BS EN 13001-2 (Revision)Crane safety. General design. Load actions

will supersede BS EN 13001-2:2004

MHE/3/1

BS EN 13146-9:2009/Amendment 1Railway applications. Track. Test methods forfastening systems. Determination of stiffness

RAE/2

BS EN 13205 (Revision)Workplace atmospheres. Assessment ofperformance of instruments for measurementof airborne particle concentrations

will supersede BS EN 13205:2002

EH/2/2

BS EN 13523-20 (Revision)Coil coated metals. Test methods. Foamadhesion


STI/27

BS EN 13550Advanced manufacturing technology. Systemsarchitecture. Enterprise model execution andintegration services

AMT/5

BS EN 14081-1:2005/Amendment 1Timber structures. Strength graded structuraltimber with rectangular cross section. Generalrequirements

B/518

BS EN 14154-1:2005/Amendment 2Water meters. General requirements

CPI/30/7

BS EN 14154-2:2005/Amendment 2Water meters. Installation and conditions of use

CPI/30/7

BS EN 14154-3:2005/Amendment 2Water meters. Test methods and equipment

CPI/30/7

BS EN 14169-3Protection profile for secure signature creationdevice. Device with key import

IST/17

BS EN 14169-4Protection profile for secure signature creationdevice. Extension for device with keygeneration and trusted channel to certificategeneration application

IST/17

BS EN 651 (Revision)Resilient floor coverings. Polyvinyl chloride floorcoverings with foam layer. Specification


PRI/3/60

BS EN 652 (Revision)Resilient floor coverings. Polyvinyl chloride floorcoverings with cork-based backing. Specification


PRI/3/60

BS EN 653 (Revision)Resilient floor coverings. Expanded (cushioned)polyvinyl chloride floor coverings. Specification


PRI/60

BS EN 674 (Revision)Glass in building. Determination of thermaltransmittance (U value). Guarded hot platemethod


B/520/4

BS EN 675 (Revision)Glass in building. Determination of thermaltransmittance (U value). Heat flow metermethod


B/520/4

BS EN 764-2 (Revision)Pressure equipment. Quantities, symbols andunits


PVE/1

BS EN ISO 1452-3 (Revision)Plastics piping systems for water supply and forburied and above-ground drainage andsewerage under pressure. Unplasticizedpoly(vinyl chloride) (PVC U). Fittings

will supersede BS EN ISO 1452-3:2009

PRI/88/2

BS EN ISO 1452-5 (Revision)Plastics piping systems for water supply and forburied and above-ground drainage andsewerage under pressure. Unplasticizedpoly(vinyl chloride) (PVC U). Fitness for purposeof the system


PRI/88/2

BS EN 1728 (Revision)Domestic furniture. Seating. Test methods forthe determination of strength and durability


FW/0/2

BS EN 1745 (Revision)Masonry and masonry products. Methods fordetermining design thermal values


B/519

BS 8436 (Revision)Electric cables. 300/500 V screened electriccables having low emission of smoke andcorrosive gases when affected by fire, for use inwalls, partitions and building voids. Multicorecables


GEL/20/17

BS 8486-1:2007/Amendment 1Examination and test of new lifts beforeputting into service. Specification for means ofdetermining compliance with BS EN 81. Electriclifts

MHE/4

BS 8486-2:2007/Amendment 1Examination and test of new lifts beforeputting into service. Specification for means ofdetermining compliance with BS EN 81.Hydraulic lifts

MHE/4

BS 31100 (Revision)Risk management. Code of practice


RM/1

BS EN 71-8 (Revision)Safety of toys. Swings, slides and similar activitytoys for indoor and outdoor family domesticuse

will supersede BS EN 71-8:2003+A4:2009

CW/15

BS EN 161 (Revision)Automatic shut-off valves for gas burners andgas appliances


GSE/22

BS EN 303-5 (Revision)Heating boilers. Heating boilers with forceddraught burners. Heating boilers for solid fuels,hand and automatically fired, nominal heatoutput of up to 300 kW. Terminology,requirements, testing and marking


RHE/10

BS EN 548 (Revision)Resilient floor coverings. Specification for plainand decorative linoleum


PRI/3/60

BS EN 649 (Revision)Resilient floor coverings. Homogeneous andheterogeneous polyvinyl chloride floorcoverings. Specification


PRI/3/60

BS EN 650 (Revision)Resilient floor coverings. Polyvinyl chloride floorcoverings on jute backing or on polyester feltbacking or on polyester felt with polyvinylchloride backing. Specification


PRI/3/60


BS EN ISO 19001In vitro diagnostic medical devices. Informationsupplied by the manufacturer with in vitrodiagnostic reagents for staining in biology


CH/212

BS EN ISO 20566 (Revision)Paints and varnishes. Determination of thescratch resistance of a coating system using alaboratory car-wash

will supersede BS EN ISO 20566:2006

STI/10

BS EN 50545-1Electrical apparatus for the detection andmeasurement of toxic and combustible gases incar parks and tunnels. General performancerequirements and test methods for thedetection and measurement of carbonmonoxide and nitrogen oxides in car parks

GEL/31/19

BS EN 60050-815International electrotechnical vocabulary.Superconductivity

L/-/90

BS EN 60191-4 (Revision)Mechanical standardization of semiconductordevices. Coding system and classification intoforms of package outlines for semiconductordevice packages


EPL/47

BS EN 60191-6-1 (Revision)Mechanical standardization of semiconductordevices. General rules for the preparation ofoutline drawings of surface mountedsemiconductor device packages. Design guidefor gull-wing lead terminals

will supersede BS EN 60191-6-1:2001

EPL/47

BS EN 60270:2001/Amendment 1High-voltage test techniques. Partial dischargemeasurements

PEL/42

BS EN 60358-2Coupling capacitor and capacitor dividers. AC orDC single-phase coupling capacitor connectedbetween line and ground for powerline carrier-frequency (PLC) application

PEL/33

BS EN 60695-4 (Revision)Fire hazard testing. Terminology concerning firetests for electrotechnical products


GEL/89

BS EN 60794-2-11 (Revision)Optical fibre cables. Indoor cables. Detailedspecification for simplex and duplex cables foruse in premises cabling


GEL/86/1

DD CEN/TS 16134Chimney terminals. General requirements andmaterial independent test methods

B/506/1

BS EN 16135Automotive fuels. Determination of manganesecontent in unleaded petrol. Flame atomicabsorption spectrometric method (AAS)

PTI/13

BS EN 16136Automotive fuels. Determination of manganesecontent in unleaded petrol. Inductively coupledplasma optical emission spectrometry (ICPOES)method

PTI/13

DD CEN/TS 16137Plastics. Determination, of bio-based carboncontent

PRI/-/1

BS EN 16139Furniture. Safety, strength and durability.Requirements for non-domestic seating

FW/0/3

BS EN 16140Natural stones test methods. Determination ofsensitivity to changes in appearance producedby thermal cycles

B/545

BS EN 16141Conservation of cultural property. Conservationof cultural heritage. Guidelines formanagement of environmental conditions.Open storage facilities. Definitions andcharacteristics of collection centres dedicated tothe preservation and management

B/560

PD CEN/TR 16142Cement. Study of the characteristic leachingbehaviour of hardened concrete for use in thenatural environment

B/516/12

BS EN 16143Extender oils. Determination of selectedpolycyclic aromatic hydrocarbons (PAH).Procedure using double LC cleaning and GC/MSanalysis

PTI/15

BS EN 16145Sanitary tapware. Extractable outlets for sinkand basin mixers. General technicalspecification

B/504/-/8

BS EN 16146Sanitary tapware. Extractable shower hoses forsanitary tapware for supply systems type 1 andtype 2. General technical specification

B/504/-/8

BS EN 14169-5Protection profile for secure signature creationdevice. Extension for device with keygeneration and trusted channel to signaturecreation application

IST/17

BS EN 14169-6Protection profile for secure signature creationdevice. Extension for device with key importand trusted channel to signature creationapplication

IST/17

BS EN 14624 (Revision)Performances of mobile leak detectors and ofroom controllers of halogenated refrigerants


RHE/18

BS EN 15037-2:2009/Amendment 1Precast concrete products. Beam-and-block floorsystems. Concrete blocks

B/524

BS EN 15037-3:2009/Amendment 1Precast concrete products. Beam-and-block floorsystems. Clay blocks

B/524

BS EN ISO 15874-1 (Revision)Plastics piping systems for hot and cold waterinstallations. Polypropylene (PP). General


PRI/88/2

BS EN ISO 15874-2 (Revision)Plastics piping systems for hot and cold waterinstallations. Polypropylene (PP). Pipes


PRI/88/2

BS EN ISO 15874-3 (Revision)Plastics piping systems for hot and cold waterinstallations. Polypropylene (PP). Fittings


PRI/88/2

BS EN ISO 15874-5 (Revision)Plastics piping systems for hot and cold waterinstallations. Polypropylene (PP). Fitness forpurpose of the system


PRI/88/2

BS EN 16129Pressure regulators, automatic change-overdevices, having a maximum regulated pressureof 4 bar, with a maximum capacity of 100kg/h,associated safety devices and adaptors forbutane, propane, and their mixtures

will partially supersede BS EN 12864:2001+A3:2009,BS EN 13785:2005+A1:2008 andBS EN 13786:2004+A1:2008

GSE/24

PD CEN/TR 16130Characterization of waste. On-site verification

B/508/3

New Work Started continued...


BS EN 61158-5-10 (Revision)Industrial communication networks. Fieldbusspecifications. Application layer servicedefinition. Type 10 elements


AMT/7



AMT/7



AMT/7



AMT/7



AMT/7



AMT/7



AMT/7

BS EN 61158-5-21Industrial communication networks. Fieldbusspecifications. Application layer servicedefinition. Type 21 elements

will supersede DD IEC/PAS 62573:2008

AMT/7

BS EN 61158-5-22Industrial communication networks. Fieldbusspecifications. Application layer servicedefinition. Type 22 elements

AMT/7

BS EN 61158-6-2 (Revision)Industrial communication networks. Fieldbusspecifications. Application layer protocolspecification. Type 2 elements


AMT/7

BS EN 61158-4-3 (Revision)Industrial communication networks. Fieldbusspecifications. Data-link layer protocolspecification. Type 3 elements


AMT/7



AMT/7



AMT/7



AMT/7



AMT/7



AMT/7

BS EN 61158-4-21Industrial communication networks. Fieldbusspecifications. Data-link layer protocolspecification. Type 21 elements


AMT/7

BS EN 61158-4-22Industrial communication networks. Fieldbusspecifications. Data-link layer protocolspecification. Type 22 elements

AMT/7



AMT/7



AMT/7

BS EN 60794-2-21 (Revision)Optical fibre cables. Indoor cables. Detailedspecification for multi-fibre optical distribution.Cables for use in premises cabling


GEL/86/1

BS EN 60794-2-31 (Revision)Optical fibre cables. Indoor cables. Detailedspecification for optical fibre ribbon cables foruse in premises cabling


GEL/86/1

BS EN 60947-2:2006+A1:2009/Amendment 2Low-voltage switchgear and controlgear.Circuit-breakers

PEL/17/2

BS EN 61076-2-109 (Revision)Connectors for electronic equipment. Productrequirements. Circular connectors. Detailspecification for connectors M 12 x 1 withscrew-locking, for data transmissions withfrequencies up to 500 MHz

will supersede DD IEC/PAS 61076-2-109:2010

EPL/48

BS EN 61157:2007/Amendment 1Standard means for the reporting of theacoustic output of medical diagnostic ultrasonicequipment

EPL/87

BS EN 61158-3-12 (Revision)Industrial communication networks. Fieldbusspecifications. Data-link layer service definition.Type 12 elements


AMT/7



AMT/7



AMT/7

BS EN 61158-3-21Industrial communication networks. Fieldbusspecifications. Data-link layer service definition.Type 21 elements


AMT/7



AMT/7


BS EN 62127-1:2007/Amendment 1Ultrasonics. Hydrophones. Measurement andcharacterization of medical ultrasonic fields upto 40 MHz

EPL/87

BS EN 62127-2:2007/Amendment 1Ultrasonics. Hydrophones. Calibration forultrasonic fields up to 40 MHz

EPL/87

BS EN 62127-3:2007/Amendment 1Ultrasonics. Hydrophones. Properties ofhydrophones for ultrasonic fields up to 40 MHz

EPL/87

BS EN 62321-1Determination of certain substances inelectrotechnical products. Introduction andoverview

GEL/111

BS EN 62321-2Determination of certain substances inelectrotechnical products. Disassembly,disjointment and mechanical samplepreparation

GEL/111

BS EN 62321-3-1Determination of certain substances inelectrotechnical products. Screeningelectrotechnical products for lead, mercury,cadmium, total chromium and total bromineusing x-ray fluorescence spectrometry

GEL/111

BS EN 62321-3-2Determination of certain substances inelectrotechnical products. Screening of totalbromine in electric and electronic products byCombustion Ion Chromatography (C-IC)

GEL/111

BS EN 62321-4Determination of certain substances inelectrotechnical products. Determination ofmercury in polymers, metals and electronics byCV-AAS, CV-AFS, ICP-OES and ICP-MS

GEL/111

BS EN 62321-5Determination of certain substances inelectrotechnical products. Determination of Cd,Pb and total-Cr in polymers and electronics andCd and Pb in metals by AAS, AFS, ICP-OES andICP-MS

GEL/111

BS EN 62683Low-voltage switchgear and controlgear.Product data and properties for informationexchange

PEL/17/2

BS EN 61158-6-21Industrial communication networks. Fieldbusspecifications. Application layer protocolspecification. Type 21 elements


AMT/7

BS EN 61158-6-22Industrial communication networks. Fieldbusspecifications. Application layer protocolspecification. Type 22 elements

AMT/7

BS EN 61161 (Revision)Ultrasonics. Power measurement. Radiationforce balances and performance requirements


EPL/87

BS EN 61300-2-28 (Revision)Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures. Tests. Industrial atmosphere(sulphur dioxide)


GEL/86/2

BS EN 61557-15Electrical safety in low voltage distributionsystems up to 1000 V A.C. and 1500 V D.C.Equipment for testing, measuring ormonitoring of protective measures. Functionalsafety requirements for insulation monitoringdevices and for equipment for insulation faultlocation in IT systems

PEL/85

BS EN 61753-031-3 (Revision)Fibre optic interconnecting devices and passivecomponents performance standard. Non-connectorized single-mode 1xN and 2xN non-wavelength-selective branching devices (NWBD)for Category U. Uncontrolled environment


GEL/86/2

BS EN 61755-3-31Fibre optic interconnecting devices and passivecomponents. Fibre optic connector opticalinterfaces. Optical interface, 8 degrees angledPC, ployhenylene sulphide rectangular ferrule,single mode fibres

GEL/86/2

BS EN 61755-3-32Fibre optic interconnecting devices and passivecomponents. Fibre optic connector opticalinterfaces. Optical interface, 8 degrees angledPC, thermoset epoxy rectangular ferrule, singlemode fibres

GEL/86/2

BS EN 62053-24Electricity metering equipment (A.C.). Particularrequirements. Static meters for reactive energy(classes 0, 5 S, 1 S and a)

PEL/13



AMT/7



AMT/7



AMT/7



AMT/7



AMT/7



AMT/7



AMT/7



AMT/7



AMT/7



BS ISO 10300-2 (Revision)Calculation of load capacity of bevel gears.Calculation of surface durability (pitting)

will supersede BS ISO 10300-2:2001

MCE/5/-/13

BS ISO 10300-3 (Revision)Calculation of load capacity of bevel gears.Calculation of tooth root strength


MCE/5/-/13

DD ISO/TS 10303-1000Assembly model

AMT/4

DD ISO/TS 10303-1287Industrial automation systems and integration.Product data representation and exchange.Application module: AP239 activity recording

AMT/4

DD ISO/TS 10303-1306Industrial automation systems and integration.Product data representation and exchange.Application module: AP239 task specificationresourced

AMT/4

BS ISO 10439 (Revision)Petroleum, chemical and gas service industries.Centrifugal compressors


MCE/8/-/1

BS ISO 10555-1 (Revision)Sterile, single-use intravascular catheters.General requirements


CH/84

BS ISO 10649-5Cutter arbors with parallel key and tenon drive.Dimensions and designation of tool holderswith polygonal interface with flange contactsurface

MTE/18

BS ISO 10649-6Cutter arbors with parallel key and tenon drive.Dimensions and designation of tool holderswith modular taper interface with ball tracksystem

MTE/18

BS ISO 10683 (Revision)Fasteners. Non-electrolytically applied zinc flakecoatings


FME/9/1

BS ISO 11088 (Revision)Assembly, adjustment and inspection of analpine ski-binding-boot (S-B-B) system

will supersede BS ISO 11088:1993

SW/136/22

BS ISO 7148-1 (Revision)Plain bearings. Testing of tribological behaviourof bearing materials. Testing of bearing metals


MCE/12

BS ISO 7148-2 (Revision)Plain bearings. Testing of tribological behaviourof bearing materials. Testing of polymer-basedbearing materials


MCE/12

BS ISO 7218:2007/Amendment 1Microbiology of food and animal feeding stuffs.General requirements and guidance formicrobiological examinations


AW/9

BS ISO 8039Light microscopes. Specification for themagnifying power of microscope imagingcomponents


CPW/172/5

BS ISO 8578Light microscopes. Marking of objectives andeyepieces


CPW/172/5

BS ISO 8600-1 (Revision)Optics and photonics. Medical endoscopes andendotherapy devices. General requirements


CPW/172/5

BS ISO 8600-7Optics and photonics. Medical endoscopes andendotherapy devices. Requirements for medicalendoscopes of water resistant type

CPW/172/5

BS ISO 9462 (Revision)Alpine ski bindings. Requirements and testmethods


SW/136/22

BS ISO 9465Alpine ski-bindings. Lateral release underimpact loading. Test method

SW/136/22

BS ISO 9650-4Small craft. Inflatable liferafts. Conditions forthe approval of service stations for small craftinflatable liferafts

GME/33

BS ISO 10300-1 (Revision)Calculation of load capacity of bevel gears.Introduction and general influence factors


MCE/5/-/13

BS ISO 1328-1Cylindrical gears. ISO system of toleranceclassification. Definitions and allowable valuesof deviations relevant to corresponding flanksof gear teeth


MCE/5/-/2

BS ISO 1823Rubber hose assemblies for oil suction anddischarge service. Specification

PRI/66

BS ISO 2739 (Revision)Sintered metal bushes. Determination of radialcrushing strength


ISE/65

BS ISO 3385 (Revision)Flexible cellular polymeric materials.Determination of fatigue by constant-loadpounding


PRI/24

BS ISO 3776-2 (Revision)Tractors and machinery for agriculture. Seatbelts. Anchorage strength requirements


AGE/6

BS ISO 6185-3 (Revision)Inflatable boats. Boats with maximum motorpower rating of 15 kW and greater


GME/33

BS ISO 6263 (Revision)Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces


MCE/18/-/5

BS ISO 6270-2 (Revision)Paints and varnishes. Determination ofresistance to humidity. Procedure for exposingtest specimens in condensation-wateratmospheres

will supersede BS EN ISO 6270-2:2005, BS 3900-F21:2005

STI/33

BS ISO 6363-3Wrought aluminium and aluminium alloys.Cold-drawn rods/bars, tubes and wires

NFE/35

BS ISO 6363-6Wrought aluminium and aluminium alloy cold-drawn rods/bars and tubes. Drawn round tubes.Tolerances on form and dimensions

NFE/35

BS ISO 7010:2003/Amendment 5Graphical symbols. Safety colours and safetysigns. Safety signs used in workplaces andpublic areas

PH/8/1


DD ISO/TS 16407-2Electronic fee collection. Evaluation ofequipment for conformity to CEN ISO/TS 17575-1. Abstract test suite

EPL/278

DD ISO/TS 16410-1Electronic fee collection. Evaluation ofequipment for conformity to CEN ISO/TS 17575-3. Test suite structure and test purposes

EPL/278

DD ISO/TS 16410-2Electronic fee collection. Evaluation ofequipment for conformity to CEN ISO/TS 17575-3. Abstract test suites

EPL/278

BS ISO 16812 (Revision)Petroleum, petrochemical and natural gasindustries. Shell-and-tube heat exchangers


PSE/17

DD ISO/PAS 17004Conformity assessment. Disclosure ofinformation. Principles and requirements

CAS/1

BS ISO 17497-2Acoustics. Sound-scattering properties ofsurfaces. Measurement of the directionaldiffusion coefficient in a free field

EH/1

BS ISO 18186Freight containers. RFID cargo shipment tagsystem

TW/1

BS ISO/IEC 19757-11Information technology. Document SchemaDefinition Languages (DSDL). Schema

IST/41

BS ISO/IEC 19770-0Information technology. Software assetmanagement. Overview and vocabulary

IST/15

BS ISO/IEC 19770-3Information technology. Software assetmanagement. Software entitlement tag

IST/15

BS ISO/IEC 19770-4Information technology. Software assetmanagement. Staged adoption of softwareasset management processes

IST/15

BS ISO 19932-1 (Revision)Equipment for crop protection. Knapsacksprayers. Requirements and test methods


AGE/15

BS ISO 15623Transport information and control systems.Forward vehicle collision warning systems.Performance requirements and test procedures

EPL/278

BS ISO 15625Grade specification and electronic testingmethod for raw silk

TCI/24

BS ISO/IEC 15944-10Information technology. Business operationalview. Coded domains

IST/40

BS ISO 16000-27Indoor air. Determination of settled fibrousdust on surfaces by SEM (scanning electronmicroscopy) (direct method)

EH/2/3

BS ISO 16125Development of a Generic Security AssuranceMSS

SSM/1/1

BS ISO 16297Milk. Bacterial count. Protocol for theevaluation of alternative methods

AW/5

BS ISO 16308Water quality. Determination of glyphosate andAMPA. Method using high performance liquidchromatography (HPLC) with tandem massspectrometric detection

EH/3/2

BS ISO 16321Occupational eye and face protection.requirements

PH/2

DD ISO/TS 16401-1Electronic fee collection. Evaluation ofequipment for conformity to CEN ISO/TS 17575-2. Suite structure and test purposes

EPL/278

DD ISO/TS 16401-2Electronic fee collection. Evaluation ofequipment for conformity to CEN ISO/TS 17575-2. Abstract test suite

EPL/278


EPL/278


EPL/278

BS ISO 11783-13 (Revision)Tractors and machinery for agriculture andforestry. Serial control and communicationsdata network. File server


AGE/6/1

BS ISO 12228:1999/Amendment 1Animal and vegetable fats and oils.Determination of individual and total sterolscontents. Gas chromatographic method


AW/307

BS ISO 12499:1999/Amendment 1Industrial fans. Mechanical safety of fans.Guarding


MCE/17

BS ISO 13164-1Water quality. Measurement of the activityconcentration of radon-222 and its short-liveddecay products. Radon origins andmeasurement methods

EH/3

BS ISO 13164-2Water quality. Measurement of the activityconcentration of radon-222 and its short-liveddecay products. Direct measurement by gammaspectrometry

EH/3

BS ISO 13164-3Water quality. Measurement of the activityconcentration of radon-222 and its short-liveddecay products. Indirect measurement withdegassing

EH/3

BS ISO 13940-2Health informatics. System of concepts tosupport continuity in care. Healthcare processand workflow

IST/35

BS ISO 14287Plain bearings. Pad materials for tilting padbearings

MCE/12

BS ISO 14660-2:1999/Amendment 1Geometrical Product Specifications (GPS).Geometrical features. Extracted median line ofa cylinder and a cone, extracted mediansurface, local size of an extracted feature


TDW/4

PD ISO/IEC TR 15504-10Information technology. Software processassessment. Safety extensions

IST/15



DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –NATIONAL BRITISHSTANDARDS

You may now comment on any NationalBritish Standard online. BSI BritishStandards has launched a Draft Reviewsystem which allows access to the draftsof all National British Standards. Toenhance access of Drafts for PublicComment for the wider community, makecomments more visible and move intocollaborative working practices, you willnow be able to comment on any NationalBritish Standard by visitinghttp://www.bsigroup.com/drafts. Allyou need to do is register. This service isfree of charge.

Please note that the only standardsavailable on this service are pure BritishStandards (National Standards e.g:BS XXXX). European and internationaldocuments are not included at this time.

Deadlines for receipt of comments oneach of the individual drafts can be foundat http://www.bsigroup.com/drafts.The deadline for the following drafts is31 August, 2010 unless otherwisestated.

Should you wish to receive these drafts inhard copy format, they are available for afee from BSI Customer Services (see ’Howto order’ on page 2).

10/30127479 DCBS 8465 Hydraulic fluid power. Monitoring thelevel of particulate contamination. Comparisonmembrane technique

MCE/18

10/30168896 DCPD 6697 Recommendations for the design ofmasonry structures to BS EN 1996-1-1 andBS EN 1996-2£18.00 members, £36.00 non-members

B/525/6

Comments for the above document are required by14 September, 2010

10/30204527 DCBS 6172 Specification for installation, servicingand maintenance of domestic cookingappliances (2nd and 3rd family gases)

GSE/30

10/30205348 DCBS 10175 Investigation of potentiallycontaminated sites. Code of practice£18.00 members, £36.00 non-members

EH/4


DD IEC/TS 60695-6-31Fire hazard testing. Smoke obscuration. Smallscale static method. Materials

GEL/89

DD IEC/TS 61934 (Revision)Electrical insulating materials and systems.Electrical measurement of partial discharges(PD) under short rise time and repetitivevoltage impulses

will supersede DD IEC/TS 61934:2006

GEL/112

PD IEC/TR 62271-311High-voltage switchgear and controlgear.Alternating current high-speed earthingswitches for secondary arc extinction ontransmission lines

PEL/17/1

DD IEC/PAS 62647-3Aerospace and defence electronic systemscontaining lead free solder. Performancetesting for systems containing lead freesolderand finishes

GEL/107

PD IEC/TR 62685Industrial communication networks. Profiles.Assessment guideline for safety devices usingIEC 61784-3 functional safe communicationprofiles (FSCPs)

AMT/7

DD IEC/PAS 62686-1General requirements for high reliabilitycomponents. Integrated circuits and discretesemiconductors

GEL/107

PD 5454Guide for the storage and exhibition of archivalmaterials


IDT/2/9

PAS 124 (Revision)Defining, implementing and managing websitestandards: A statement of best practice

will supersede PAS 124:2008

BS ISO 19932-2 (Revision)Equipment for crop protection. Knapsacksprayers. Performance limits


AGE/15

BS ISO/IEC 20004Information technology. Security techniques.Secure software development and evaluationunder ISO/IEC 15408 and ISO/IEC 18405

IST/33

BS ISO/IEC 20008Information technology. Security techniques.Anonymous digital signatures

IST/33

BS ISO/IEC 20009Information technology. Security techniques.Anonymous entity authentication

IST/33

BS ISO 21100Air cargo unit load devices. Performancerequirements and test parameters

ACE/57

PD ISO/TR 22442-4Medical devices utilizing animal tissues andtheir derivatives. Principles for eliminationand/or inactivation of transmissible spongiformencephalopathy (TSE) agents and validationassays for those processes

CH/194

BS ISO 24631-5Radio frequency identification of animals. RFIDtransceivers. Procedure for testing the capabilityof reading ISO 11784 and ISO 11785transponders

AGE/6/1

BS ISO/IEC 29169Information technology. The application ofconformity assessment methodology to processcapability and organizational maturity

IST/15

BS ISO/IEC 29192-2Information technology. Security techniques.Lightweight cryptography. Block ciphers

IST/33

BS ISO/IEC 29192-3Information technology. Security techniques.Lightweight cryptography. Stream ciphers

IST/33

BS ISO/IEC 29192-4Information technology. Security techniques.Lightweight cryptography. Mechanisms usingasymmetric techniques

IST/33

DD IEC/TS 60695-6-30Fire hazard testing. Smoke obscuration. Smallscale static method. Apparatus

GEL/89


Please

do not send

confirmation

of

orders placed by

telephone

as it can lead to

duplication

10/30175565 DCBS ISO/IEC 19794-6 Biometric data interchangeformats. Iris image data

IST/44

10/30176747 DCBS ISO 23584-2 Optics and photonics.Specification of reference dictionary. Classes’and properties’ definitions£18.00 members, £36.00 non-members

CPW/172

10/30178768 DCBS ISO 11930 Cosmetics. Microbiology. Efficacytest and evaluation of the preservation of acosmetic product

CW/217

10/30179644 DCBS EN 14142-1 Postal services. Addressdatabases. Components of postal addresses

SVS/4

10/30182296 DCBS EN 1010-1 AMD1 Safety of machinery.Safety requirements for the design andconstruction of printing and paper convertingmachines. Common requirements

MCE/3/9

10/30182320 DCBS EN 1679-1 AMD1 Reciprocating internalcombustion engines. Safety. Compressionignition engines

MCE/14/-/2


10/30183024 DCBS EN 60601-2-11 Medical electricalequipment. Particular requirements for basicsafety and essential performance of gammabeam therapy equipment

CH/62/3

10/30184432 DCBS ISO/IEC 27035 Information technology.Security techniques. Information securityincident management

IST/33

10/30185294 DCBS ISO 11638 Resilient floor coverings.Heterogeneous poly(vinyl chloride) flooring onfoam. Specification

PRI/3/60

10/30185302 DCBS EN 80601-2-60 Medical electricalequipment. Particular requirements for basicsafety and essential performance of dentalequipment

CH/62/4

DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –ADOPTIONS

All Draft British Standards are availablefrom BSI Customer Services (see ’How toorder’ on page 2)

Most drafts are charged at£10.00 to members and£20.00 to non-members.

Larger draft documents are charged at ahigher price according to the number ofpages and are priced individually below.

Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL by 31 August, 2010 unlessotherwise stated, to be considered by therelevant BSI committee.

Draft standards may be modified beforeadoption and issue as British Standards.

10/30084678 DCBS ISO 21929-1 Sustainability in buildingconstruction. Sustainability indicators.Framework for the development of indicatorsand a core set of indicators for buildings

B/558


10/30136309 DCBS ISO/IEC 24745 Information technology.Security techniques. Biometric informationprotection

IST/33

10/30162951 DCBS EN 61973 High voltage direct current(HVDC) substation audible noise

PEL/22

10/30168519 DCBS ISO/IEC 27034-1 Information technology.Security techniques. Application security.Overview and concepts

IST/33


10/30168529 DCBS ISO/IEC 27033-2 Information technology.Security techniques. Network security.Guidelines for the design and implementationof network security

IST/33

10/30169416 DCBS EN 15437-2 Railway applications. Axleboxcondition monitoring. Performancerequirements. Onboard systems for temperaturemonitoring

RAE/3/-/5


10/30205437 DCBS 4933 Specification for ISO metric black cupand countersunk head bolts and screws withhexagon nuts

FME/9/1

10/30209078 DCBS 3F 128 Specification for cotton webbingsuitable for aerospace purposes (warp yarnnominally R 310 tex)

ACE/65

10/30210437 DCBS 8478 Respiratory protective devices.Breathing gases for diving and hyperbaricapplications

PH/4/7

10/30212806 DCBS 8536 Facility management briefing

FMW/1

10/30219420 DCBS 5502-31 AMD1 Buildings and structures foragriculture. Guide to the storage and handlingof waste

B/549

10/30219422 DCBS 5502-50 AMD2 Buildings and structures foragriculture. Code of practice for design,construction and use of storage tanks andreception pits for livestock slurry

B/549

10/30229203 DCBS 1722-18 Fences. Specification for free-standing temporary steel mesh perimeterfencing systems

B/201

Draft British Standards For Public Comment continued...


Help Us to Help

You!

Always quote your Customer Number

Don’t know your number?

Contact Customer Services

020 8996 9001

who will be happy to check it for you

10/30201346 DCBS ISO 22514-6 Statistical methods in processmanagement. Capability and performance.Process capability statistics for characteristicsfollowing a multivariate normal distribution

SS/4


10/30201937 DCBS ISO 13161 Water quality. Measurement ofpolonium 210 activity concentration in water byalpha spectrometry

EH/3


10/30202494 DCBS EN ISO 11600 AMD1 Building construction.Jointing products. Classification andrequirements for sealants

B/547

10/30203519 DCBS ISO 11372 Gas cylinders. Acetylenecylinders. Filling conditions and fillinginspection

PVE/3/7

Comments for the above document are required by2 August, 2010

10/30204625 DCBS EN ISO 13132 Laboratory glassware. Petridishes

LBI/36

10/30205056 DCBS EN 14985 Cranes. Slewing jib cranes

MHE/3/3

Comments for the above document are required by19 July, 2010

10/30205370 DCBS ISO 30300 Information and documentation.Management system for records. Fundamentalsand vocabulary

IDT/2/17

10/30205373 DCBS ISO 30301 Information and documentation.Management system for records. Requirements

IDT/2/17

10/30205401 DCBS ISO 6953-3 Pneumatic fluid power.Compressed air pressure regulators and filter-regulators. Alternative test methods formeasuring the flow-rate characteristics ofpressure regulators

MCE/18/-/5

10/30205696 DCBS EN ISO 9999 Assistive products for personswith disability. Classification and terminology£18.00 members, £36.00 non-members

CH/173/-/2

10/30197644 DCBS ISO 7203-2 Fire extinguishing media. Foamconcentrates. Specifications for medium andhigh expansion foam concentrates for topapplication to water-immiscible liquids

FSH/18/3

10/30197711 DCBS ISO 10785 Space systems. Bellows. Designand operation

ACE/68/-/1


10/30197728 DCBS ISO 10571 Tyres for mobile cranes andsimilar specialized machines

AUE/4

10/30197912 DCBS EN ISO 11446-1 Road vehicles. Connectorsfor the electrical connection of towing andtowed vehicles. 13-pole connectors for vehicleswith 12 V nominal supply voltage not intendedto cross water fords

AUE/16

10/30198094 DCBS EN 1708-3 Welding. Basic weld joint detailsin steel. Plating, buttering, lining of pressurizedcomponents

WEE/-/1


10/30199074 DCBS ISO 6162-1 Hydraulic fluid power. Flangeconnections with split or one-piece flangeclamps and metric or inch screws. Flangeconnectors, ports and mounting surfaces for useat pressures of 3,5 MPa (35 bar) to 35 MPa (350bar), DN 13 to DN 127

MCE/18/-/4


10/30199149 DCBS ISO 12914 Soil quality. Microwave-assistedextraction of the aqua regia soluble fraction forthe determination of elements

EH/4


10/30201045 DCBS ISO 12787 Cosmetics. Analytical methods.Validation criteria for analytical results usingchromatographic techniques

CW/217

10/30201110 DCBS EN 60825-4 AMD2 Safety of laser products.Laser guards

EPL/76


10/30188862 DCBS ISO 19893 Plastics piping systems.Thermoplastics pipes and fittings for hot andcold water. Test method for the resistance ofmounted assemblies to temperature cycling

PRI/88/4

10/30191898 DCBS ISO 27730 Information and documentation.International standard collection identifier (ISCI)

IDT/2/18

10/30195690 DCBS EN 13832-3 Footwear protecting againstchemicals. Requirements for footwear highlyresistant to chemicals under laboratoryconditions

PH/1

10/30196060 DCBS ISO 24343-2 Resilient and laminate floorcoverings. Determination of indentation andresidual indentation. Resilient floor covering.Short-term residual indentation

PRI/3/60

10/30196530 DCBS EN ISO 5814 Water quality. Determinationof dissolved oxygen. Electrochemical probemethod

EH/3/2


10/30196860 DCBS ISO 1407 Rubber. Determination of solventextract

PRI/23

10/30196872 DCBS ISO 3384 Rubber, vulcanized orthermoplastic. Determination of stressrelaxation in compression at ambient and atelevated temperatures

PRI/22

10/30196933 DCBS ISO 20152-2 Timber structures. Bondperformance of adhesives. Additionalrequirements

B/518

10/30197198 DCBS ISO 12108 Metallic materials. Fatiguetesting. Fatigue crack growth method

ISE/101/6

10/30197240 DCBS ISO 29201 Water quality. The variability oftest results and the uncertainty of measurementof microbiological enumeration methods

EH/3/4

10/30197541 DCBS ISO 12779 Lactose. Determination of watercontent. Karl Fischer method

AW/5


10/30210308 DCBS EN ISO 12217-2 Small craft. Stability andbuoyancy assessment and categorization.Sailing boats of hull length greater than orequal to 6 m

GME/33

10/30210312 DCBS EN ISO 12217-3 Small craft. Stability andbuoyancy assessment and categorization. Boatsof hull length less than 6 m

GME/33

10/30210811 DCBS EN ISO 11446-2 Road vehicles. Connectorsfor the electrical connection of towing andtowed vehicles. 13-pole connectors for vehicleswith 12 V nominal supply voltage intended tocross water fords

AUE/16

10/30211242 DCBS EN 12601 Reciprocating internalcombustion engine driven generating sets.Safety

MCE/14


10/30211361 DCBS ISO 22196 Measurement of antibacterialactivity on plastics and non-porous surfaces

PRI/21

10/30212194 DCBS ISO/IEC 14496-25 AMD1 Informationtechnology. Coding of audio-visual objects. 3DGraphics Compression Model

IST/37

10/30213525 DCBS ISO 15928-5 Houses. Description ofperformance. Energy usage

B/500


10/30213756 DCBS ISO/IEC/IEEE 21451-7 Informationtechnology. Smart Transducer Interface forSensors and Actuators. Transducers to RadioFrequency Identification (RFID) SystemsCommunication Protocols and TransducerElectronic Data Sheet Formats

IST/34

10/30216107 DCBS ISO 15163 Milk and milk products. Calfrennet and adult bovine rennet. Determinationby chromatography of chymosin and bovinepepsin

AW/5

10/30216660 DCBS EN 747-2 Furniture. Bunk beds and highbeds. Test methods

FW/0/2


10/30208413 DCBS ISO/IEC 29176 Information technology.Automatic identification and data capturetechniques. Mobile item identification andmanagement. Consumer privacy-protectionprotocol for Mobile RFID services

IST/34

10/30208415 DCBS ISO/IEC 29177 Information technology.Automatic identification and data capturetechnique. Mobile item identification andmanagement. Object Directory Service forMobile AIDC services

IST/34

10/30208417 DCBS ISO/IEC 29178 Information technology.Automatic identification and data capturetechniques. Mobile item identification andmanagement. Service broker for Mobile AIDCservices

IST/34

10/30208419 DCBS ISO/IEC 29179 Information technology.Automatic identification and data capturetechniques. Mobile item identification andmanagement. Mobile AIDC applicationprogramming interface

IST/34

10/30208629 DCBS ISO 17654 Destructive tests on welds inmetallic materials. Resistance welding. Pressuretest on resistance seam welds

WEE/29


10/30208647 DCBS ISO 13043 Road vehicles. Refrigerantsystems used in Mobile Air Conditioning systems(MAC). Safety requirements

AUE/9

10/30208980 DCBS ISO 13053-1 Quantitative methods inprocess improvement. Six sigma. DMAICmethodology

MS/6

10/30208983 DCBS ISO 13053-2 Quantitative methods inprocess improvement. Six sigma. Tools andtechniques

MS/6

10/30209323 DCBS ISO 3034 Corrugated fibreboard.Determination of single sheet thickness

PAI/11

10/30210304 DCBS EN ISO 12217-1 Small craft. Stability andbuoyancy assessment and categorization. Non-sailing boats of hull length greater than orequal to 6 m

GME/33

10/30206048 DCBS EN 60317-60 Specifications for particulartypes of winding wires. Polyester glass fibreswound resin or varnish impregnated or notimpregnated, bare or enamelled rectangularcopper wire, temperature index 155

GEL/55



GEL/55



GEL/55


10/30206199 DCBS ISO 6875 Dental patient chair

CH/106/4


10/30206823 DCBS ISO 6195 Fluid power systems andcomponents. Cylinder-rod wiper-ring housingsin reciprocating applications. Dimensions andtolerances

MCE/11


10/30208205 DCBS ISO 28881 Machine tools. Safety. Electrodischarge machines

MTE/1/1

10/30208407 DCBS ISO/IEC 29173-1 Information technology.Automatic identification and data capturetechniques. Mobile item identification andmanagement. Mobile RFID interrogator deviceprotocol for ISO/IEC 18000-6 Type B and Type C

IST/34

10/30208409 DCBS ISO/IEC 29174 Information technology.Automatic identification and data capturetechnique. Mobile item identification andmanagement. Mobile Item Identifier andencoding format for Mobile AIDC services

IST/34

10/30208411 DCBS ISO/IEC 29175 Information technology.Automatic identification and data capturetechniques. Mobile item identification andmanagement. Application data structureencoding format for Mobile AIDC services

IST/34



10/30218107 DCBS EN 12201-4 Plastics piping systems forwater supply, and for drainage and sewerageunder pressure. Polyethylene (PE). Valves forwater supply systems

PRI/88/2


10/30218124 DCBS EN 16109 Fertilizers. Determination ofmicro-nutrient ions complexed in fertilizers.Identification of lignosulfonates

CII/37

10/30218263 DCBS ISO 7700-2 Food products. Checking theperformance of moisture meters in use.Moisture meters for oilseeds

AW/307

10/30218554 DCBS ISO 13926-3 Pen systems. Seals for pen-injectors for medical use

CH/212


10/30218651 DCBS EN 15303-1 Design and application ofplasterboard systems on frames. Generalprinciples of design

B/544/3


10/30218657 DCBS EN 1110 Flexible sheets for waterproofing.Bitumen sheets for roof waterproofing.Determination of flow resistance

B/546/1


10/30219127 DCBS ISO 22093 Industrial automation systemsand integration. Physical device control.Dimensional Measuring Interface Standard(DMIS)£40.00 members, £80.00 non-members

AMT/4


10/30219250 DCBS ISO 16100-6 Industrial automation systemsand integration. Manufacturing softwarecapability profiling for interoperability.Interface services and protocols for matchingprofiles based on multiple capability classstructures

AMT/5

10/30219342 DCBS ISO 10667-1 Assessment service delivery.Procedures and methods to assess people inwork and organizational settings. Requirementsfor service providers

SVS/9/1

10/30217109 DCBS EN ISO 15609-6 Specification andqualification of welding procedures for metallicmaterials. Welding procedure specification.Laser-arc hybrid welding

WEE/36


10/30217115 DCBS EN ISO 12932 Welding. Laser-arc hybridwelding of steels, nickel and nickel alloys.Quality levels for imperfections

WEE/-/1


10/30217311 DCBS EN 71-1 Safety of toys. Mechanical andphysical properties

CW/15


10/30217319 DCBS EN 13598-1 Plastics piping systems for non-pressure underground drainage and sewerage.Unplasticized poly(vinyl chloride) (PVC-U),polypropylene (PP) and polyethylene (PE).Specifications for ancillary fittings includingshallow inspection chambers

PRI/88/1


10/30217586 DCBS EN 16104 Food data. Data structure

AW/-/3

10/30217888 DCBS EN 1540 Workplace exposure. Terminology

EH/2/2

10/30218052 DCBS EN ISO 13032 Petroleum products.Determination of low sulfur content ofautomotive fuels. Energy-dispersive X-rayfluorescence spectrometry

PTI/13


10/30218095 DCBS EN 15151-1 Mountaineering equipment.Braking devices. Braking devices with assistedlocking, safety requirements and test methods

SW/136/5

10/30218098 DCBS EN 15151-2 Mountaineering equipment.Braking devices. Manual braking devices, safetyrequirements and test methods

SW/136/5

10/30218101 DCBS EN 16105 Paints and varnishes. Leaching ofsubstances from coatings. Laboratory immersionmethod

STI/10

10/30216808 DCBS ISO 11040-3 Prefilled syringes. Seals fordental local anaesthetic cartridges

CH/212


10/30216826 DCBS ISO 7794 Cross-country skis. Ski bindingscrews. Requirements

SW/136


10/30216829 DCBS ISO 7795 Cross-country skis. Ski-bindingscrews. Test methods

SW/136


10/30216835 DCBS ISO 7331 Ski-poles for alpine skiing.Requirements and test methods

SW/136


10/30216984 DCBS EN 295-1 Vitrified clay pipe systems fordrains and sewers. Requirements for pipes,fittings and joints

B/505

10/30216987 DCBS EN 295-2 Vitrified clay pipe systems fordrains and sewers. Evaluation of conformity andsampling

B/505

10/30216990 DCBS EN 295-3 Vitrified clay pipe systems fordrains and sewers. Test methods

B/505

10/30216993 DCBS EN 295-4 Vitrified clay pipe systems fordrains and sewers. Requirements for adaptors,connectors and flexible couplings

B/505

10/30216996 DCBS EN 295-5 Vitrified clay pipe systems fordrains and sewers. Requirements for perforatedpipes and fittings

B/505

10/30217002 DCBS EN 295-7 Vitrified clay pipe systems fordrains and sewers. Requirements for pipes andjoints for pipe jacking

B/505


10/30227994 DCBS EN 50558 Interoperability specifications ofcommon external power supply (EPS) for usewith data-enabled mobile telephones

EPL/100

Comments for the above document are required by1 October, 2010

10/30228001 DCBS EN 50527-2-1 Procedure for the assessmentof the exposure to electromagnetic fields ofworkers bearing active implantable medicaldevices. Specific assessment for workers withcardiac pacemakers

GEL/106

10/30228004 DCBS EN 60358-2 Coupling capacitor andcapacitor dividers. AC or DC single-phasecoupling capacitor connected between line andground for power line carrier-frequency (PLC)application

PEL/33


10/30228033 DCBS EN 60794-2-11 Optical fibre cables. Indooroptical fibre cables. Detailed specification forsimplex and duplex cables for use in premisescabling

GEL/86/1


10/30228043 DCBS EN 60794-2-31 Optical fibre cables. Indooroptical fibre cables. Detailed specification foroptical fibre ribbon cables for use in premisescabling

GEL/86/1


10/30228047 DCBS EN 60794-2-21 Optical fibre cables. Indooroptical fibre cables. Detailed specification formulti-fibre optical distribution cables for use inpremises cabling

GEL/86/1


10/30228062 DCBS ISO 16817 Building environment design.Indoor environment. Design process for visualenvironment

RHE/16

10/30228082 DCBS EN 15898 Conservation of cultural property.Main general terms and definitions concerningconservation of cultural property

B/560

10/30227742 DCBS EN 2704 Aerospace series. Aluminium alloyAL-P2024-. T3511. Drawn bar De ≤ 75 mm

ACE/61/-/24


10/30227751 DCBS EN 3997 Aerospace series. Aluminium alloyAL-P2024- Al Cu4Mg1. T3. Sheet and strip. 0,4mm ≤ a ≤ 6 mm

ACE/61/-/24


10/30227763 DCBS EN 6114 Aerospace series. Bolt.Countersunk head, Short thread. Inch series

ACE/12


10/30227764 DCBS EN 6115 Aerospace series. Bolt. Protrudinghead, Short thread. Inch series

ACE/12


10/30227777 DCBS EN 60191-4 Mechanical standardization ofsemiconductor devices. Coding system andclassification into forms of package outlines forsemiconductor device packages

EPL/47

10/30227781 DCBS EN 60191-6-1 Mechanical standardizationof semiconductor devices. General rules for thepreparation of outline drawings of surfacemounted semiconductor device packages.Design guide for gull-wing lead terminals

EPL/47

10/30227785 DCBS EN 61076-2-109 Connectors for electronicequipment. Product requirements. Circularconnectors. Detail specification for connectorsM 12 x 1 with screw-locking, for datatransmissions with frequencies up to 500 MHz

EPL/48

10/30227966 DCBS ISO 10794 Space systems. Programmemanagement. Material, mechanical parts andprocesses

ACE/68/-/5


10/30227978 DCBS ISO 15306 AMD1 Glass-reinforcedthermosetting plastics (GRP) pipes.Determination of the resistance to cyclicinternal pressure

PRI/88/2

10/30219345 DCBS ISO 10667-2 Assessment service delivery.Procedures and methods to assess people inwork and organizational settings. Requirementsfor the client

SVS/9/1

10/30219557 DCBS EN ISO 8224-1 AMD1 Traveller irrigationmachines. Operational characteristics andlaboratory and field test methods

AGE/30

10/30219573 DCBS ISO 10315 AMD1 Cigarettes. Determinationof nicotine in smoke condensates. Gas-chromatographic method

AW/40


10/30219617 DCBS EN ISO 898-1 AMD1 Mechanical propertiesof fasteners made of carbon steel and alloysteel. Bolts, screws and studs with specifiedproperty classes. Coarse thread and fine pitchthread

FME/9/1

10/30219621 DCBS ISO 8483 AMD1 Glass-reinforcedthermosetting plastics (GRP) pipes and fittings.Test methods to prove the design of boltedflange joints

PRI/88/2

10/30219624 DCBS ISO 8533 AMD1 Glass-reinforcedthermosetting plastics (GRP) pipes and fittings.Test methods to prove the design of cementedor wrapped joints

PRI/88/2

10/30219716 DCBS EN ISO 13501 Petroleum and natural gasindustries. Drilling fluids. Processing systemsevaluation

PSE/17/-/3

10/30219810 DCBS EN 45545-5 Railway applications. Fireprotection on railway vehicles. Fire safetyrequirements for electrical equipment includingthat of trolley buses, track guided buses andmagnetic levitation vehicles

RAE/1

10/30227151 DCBS EN 50131-9 Alarm systems. Intrusion andhold up systems. Alarm verification. Methodsand principles

GW/1/2


10/30227732 DCBS EN 2419 Aerospace series. Aluminium alloyAL-P2024- Al Cu4Mg1. T351. Plate. 6 mm < a ≤150 mm

ACE/61/-/24




DOCUMENTS NOT ISSUEDAS DPCs

Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000

EN 619:2002/Amendment 1Continuous handling equipment and systems.Safety and EMC requirements for equipmentfor mechanical handling of unit loads

Please note the above document has recentlybeen circulated at UAP stage. Copies areavailable on request from the contact point(below).Contact: Committee Service CentreEmail: [email protected]

MHE/9

EN 12080:2007/Amendment 1Railway applications. Axleboxes. Rollingbearings

EN 12081:2007/Amendment 1Railway applications. Axleboxes. Lubricatinggreases

EN 12082:2007/Amendment 1Railway applications. Axleboxes. Performancetesting

EN 13103:2009/Amendment 1Railway applications. Wheelsets and bogies.Non-powered axles. Design method

EN 13104:2009/Amendment 1Railway applications. Wheelsets and bogies.Powered axles. Design method

EN 13260:2009/Amendment 1Railway applications. Wheelsets and bogies.Wheelsets. Product requirements

EN 13261:2009/Amendment 1Railway applications. Wheelsets and bogies.Axles. Product requirements

EN 13715:2006/Amendment 1Railway applications. Wheelsets and bogies.Wheels. Wheel treads

EN 14865-1:2009/Amendment 1Railway applications. Axlebox lubricatinggreases. Method to test the ability to lubricate

EN 14865-2:2006/Amendment 2Railway applications. Axlebox lubricatinggreases. Method to test the mechanical stabilityto cover vehicle speeds up to 200 km/h

10/30228493 DCBS EN 61753-031-3 Fibre optic interconnectingdevices and passive components. Performancestandard. Non-connectorised single-mode 1xNand 2xN non-wavelength-selective branchingdevices for Category U. Uncontrolledenvironment

GEL/86/2


10/30228521 DCBS ISO/IEC 27005 Information technology.Security techniques. Information security riskmanagement

IST/33

10/30228627 DCBS EN ISO 1452-3 Plastics piping systems forwater supply and for buried and above-grounddrainage and sewerage under pressure.Unplasticized poly(vinyl chloride) (PVC-U).Fittings

PRI/88/2


10/30228770 DCBS EN 60270 AMD1 High-voltage testtechniques. Partial discharge measurements

PEL/42


10/30228774 DCBS EN 62271-102 AMD2 High-voltageswitchgear and controlgear. Alternating currentdisconnectors and earthing switches (additionof 1100 kV and 1200 kV)

PEL/17/1

10/30228779 DCBS EN 62271-110 High-voltage switchgear andcontrolgear. Inductive load switching

PEL/17/1

10/30228868 DCBS EN 61300-2-28 Fibre optic interconnectingdevices and passive components. Basic test andmeasurement procedures. Tests. Industrialatmosphere (sulphur dioxide)

GEL/86/2


10/30228934 DCBS ISO/IEC 29112 Information technology.Office equipment. Test charts and methods formeasuring monochrome printer resolution

IST/3


10/30229049 DCBS EN 60947-2 AMD2 Low-voltage switchgearand controlgear. Circuit-breakers

PEL/17/2


10/30228107 DCBS EN 2633 Aerospace series. Aluminium alloyAL-P2024-. T3511. Extruded bars and sections.1,2 mm ≤ De ≤ 160 mm with peripheral coarsegrain control

ACE/61/-/24


10/30228108 DCBS EN 4400-9 Aerospace series. Aluminium andaluminium- and magnesium- alloys. Technicalspecification. Pre-production and productioncastings

ACE/61/-/24


10/30228109 DCBS EN 4608-004 Aerospace series. Cable,electrical, fire resistant. Single and twistedmulticore assembly, screened (braided) andjacketed. Operating temperatures between -65ºC and 260ºC. DW family. lightweight. UVLaser printable. Product standard

ACE/6


10/30228110 DCBS EN 2346-005 Aerospace series. Cable,electrical, fire resistant. Operating temperaturesbetween -65ºC and 260ºC. DW family, single UVlaser printable and multicore assembly. Lightweight. Product standard

ACE/6


10/30228138 DCBS ISO 15779 Condensed-aerosol fire-extinguishing systems. Requirements and testmethods for components and system design,installation and maintenance. Generalrequirements

FSH/18/6

10/30228171 DCBS EN 15759-1 Conservation of culturalproperty. Indoor climate. Heating places ofworship

B/560


10/30228274 DCBS ISO 16131 Leather. Upholstery leathercharacteristics. Selection of leather for furniture

TCI/69

10/30228327 DCBS ISO/IEC 18031 Information technology.Security techniques. Random bit generation£18.00 members, £36.00 non-members

IST/33


IEC 61158-5-22Industrial communication networks. Fieldbusspecifications. Data-link layer service definition.Type 22 elements

IEC 61158-6-2Industrial communication networks. Fieldbusspecifications. Application layer servicedefinition. Type 2 elements











IEC 61158-6-22Industrial communication networks. Fieldbusspecifications. Data-link layer protocolspecification. Type 22 elements

The above drafts have been circulated for FIDSvote. Copies are available on request from thecontact point (below).Contact: Committee Service CentreEmail: [email protected]

AMT/7















EN 15427:2008/Amendment 1Railway applications. Wheel/rail frictionmanagement. Flange lubrication

The above amendments have all been circulatedunder the shortened UAP procedure in order toamend the Annex ZAs. Text of the amendmentsare available from the Programme Manager(below).Contact: Tim NewinsEmail: [email protected]

RAE/3

IEC 60050-815International Electrotechnical Vocabulary.Superconductivity

Copies of the above document are availablefrom the contact point (below).Contact: Committee Service CentreEmail: [email protected]

L/-/90










Documents Not Issued As DPCs continued...


EN 1854:2010Pressure sensing devices for gas burners and gasburning appliances

GSE/22

EN 9110:2010Quality management systems. Requirements foraviation maintenance organizations

ACE/1

EN 12267:2003+A1:2010Food processing machinery. Circular sawmachines. Safety and hygiene requirements

MCE/3/5

EN 12268:2003+A1:2010Food processing machinery. Band saw machines.Safety and hygiene requirements

MCE/3/5

EN 12288:2010Industrial valves. Copper alloy gate valves

PSE/18/2

EN 12355:2003+A1:2010Food processing machinery. Derinding, skinningand membrane removal machines. Safety andhygiene requirements

MCE/3/5

EN 12568:2010Foot and leg protectors. Requirements and testmethods for toecaps and penetration resistantinserts

PH/1

EN 12621:2006+A1:2010Machinery for the supply and circulation ofcoating materials under pressure. Safetyrequirements

MCE/3/8

EN 12753:2005+A1:2010Thermal cleaning systems for exhaust gas fromsurface treatment equipment. Safetyrequirements

MCE/3/8

EN 12855:2003+A1:2010Food processing machinery. Rotating bowlcutters. Safety and hygiene requirements

MCE/3/5

EN 12921-1:2005+A1:2010Machines for surface cleaning and pre-treatment of industrial items using liquids orvapours. Common safety requirements

MCE/3/8

EN 13036-1:2010Road and airfield surface characteristics. Testmethods. Measurement of pavement surfacemacrotexture depth using a volumetric patchtechnique

B/510/5

prEN 60456Clothes washing machines for household use.Methods for measuring the performance

The above draft details the proposed CENELECcommon modifications to IEC 60456:2010 andhas been issued for a shortened CENELECenquiry. Copies can be obtained from theProgramme Manager (below). Any commentsshould be submitted no later than 20 August,2010.Contact: Bob StrattonEmail: [email protected]

CPL/59/1

CEN EUROPEANSTANDARDS

EUROPEAN RATIFIED TEXTS

The documents listed below have recentlybeen issued by CEN but have not yet beenpublished as BS ENs. BSI has an obligationto adopt all ENs and to withdraw anyconflicting British Standards (BSs) or partsof BSs. The following will beimplemented as BS ENs or as amendmentsto BS ENs shortly. Notification of theirimplementation will be given in theBS EN Publications section of the relevantedition of Update Standards.

EN 125:2010Flame supervision devices for gas burningappliances. Thermoelectric flame supervisiondevices

GSE/22

EN 421:2010Protective gloves against ionizing radiation andradioactive contamination

PH/3/8

EN 746-2:2010Industrial thermoprocessing equipment. Safetyrequirements for combustion and fuel handlingsystems

MCE/3/8

EN 894-4:2010Safety of machinery. Ergonomics requirementsfor the design of displays and control actuators.Location and arrangement of displays andcontrol actuators

PH/9

EN 1106:2010Manually operated taps for gas burningappliances

GSE/22

EN 1147:2010Portable ladders for fire service use

FSH/17/9

EN 1678:1998+A1:2010Food processing machinery. Vegetable cuttingmachines. Safety and hygiene requirements

MCE/3/5

ISO 10303-239Industrial automation systems and integration.Product data representation and exchange.Application protocol. Product life cycle support

This draft standard is currently at DIS stage andis available for comment. The files are notsuitable for making available in a paper or PDFformat, although they are available in a moreappropriate electronic format. If you would liketo receive the electronic versions, please contactthe Programme Manager (below). Deadline forcomments is 2 September, 2010.Contact: Ben SheridanEmail: [email protected]

AMT/4

prEN ISO 15186-2(ISO 15186-2:2003)Acoustics. Measurement of sound insulation inbuildings and of building elements using soundintensity. Field measurements

The text of ISO 15186-2:2003 has beenapproved by CEN as a FprEN ISO 15186-2:2010without any modification.Contact: Charlotte ArmstrongEmail: [email protected]

EH/1/6

prEN ISO 15186-3(ISO 15186-3:2002)Acoustics. Measurement of sound insulation inbuildings and of building elements using soundintensity. Laboratory measurements at lowfrequencies

The text of ISO 15186-3:2002 has beenapproved by CEN as a FprEN ISO 15186-3:2010without any modification.Contact: Charlotte ArmstrongEmail: [email protected]

EH/1/6

prEN 3777Aerospace series. Pins, quick release, single anddouble acting. Technical specification

prEN 3843Aerospace series. Nuts, bihexagonal, self-locking, with counterbore, in heat resistingsteel, passivated. Classification: 1100 MPa (atambient temperature)/650ºC

The above documents have not been issued asDrafts for Public Comment. For moreinformation, please email the contact point(below).Contact: Committee Service CentreEmail: [email protected]

ACE/12


To order visit


CEN WORKSHOPAGREEMENTS

CWA 16131:2010Europass diploma supplement applicationprofile of the euroLMAI (EuroLMAI Europass DSAP)

no current standard is superseded£62.00 members, £124.00 non-members

CWA 16132:2010European learner mobility achievementinformation (EuroLMAI)


CWA 16133:2010Guidelines on a European Learner Mobilitymodel


CEN REPORTS

CEN/TR 13097:2010Characterization of sludges. Good practice forsludge utilisation in agriculture

EH/5

CEN/TR 13714:2010Characterization of sludges. Sludgemanagement in relation to use or disposal

EH/5

CEN/TR 15941:2010Sustainability of construction works.Environmental product declarations.Methodology for selection and use of genericdata

B/558

CEN/TR 16013-1:2010Workplace exposure. Guide for the use ofdirect-reading instruments for aerosolmonitoring. Choice of monitor for specificapplications

EH/2/2

CEN/TR 16013-2:2010Workplace exposure. Guide for the use ofdirect-reading instruments for aerosolmonitoring. Evaluation of airborne particleconcentrations using Optical Particle Counters

EH/2/2

CEN/CLC TR 16103:2010Energy management and energy efficiency.Glossary of terms

SEM/1

EN 14502-1:2010Cranes. Equipment for the lifting of persons.Suspended baskets

MHE/3/11

EN 15686:2010Railway applications. Testing for the acceptanceof running characteristics of railway vehicleswith cant deficiency compensation systemand/or vehicles intended to operate with highercant deficiency than stated in EN 14363:2005,Annex G

RAE/1/-/8

EN 15687:2010Railway applications. Testing for the acceptanceof running characteristics of freight vehicleswith static wheel loads higher than 225 kN andup to 250 kN

RAE/1/-/8

EN 15727:2010Ventilation for buildings. Ducts and ductworkcomponents, leakage classification and testing

RHE/2

EN 15852:2010Ambient air quality. Standard method for thedetermination of total gaseous mercury

EH/2/3

EN 15853:2010Ambient air quality. Standard method for thedetermination of mercury deposition

EH/2/3

EN 15900:2010Energy efficiency services. Definitionsrequirements

SEM/1

EN 15905:2010Fertilizers. Determination of 3-methylpyrazole(MP) using high-performance liquidchromatography (HPLC)

CII/37

EN 15909:2010Fertilizers. Determination of calcium andformate in calcium foliar fertilizers

CII/37

EN 16000:2010Plastics piping systems. Systems within thebuilding structure. Mounting and fixing ofcomponents in the test apparatus to thermalattack by a single burning item

PRI/88/1

EN 16002:2010Flexible sheets for waterproofing.Determination of the resistance to wind load ofmechanically fastened flexible sheets for roofwaterproofing

B/546

EN 13111:2010Flexible sheets for waterproofing. Underlays fordiscontinuous roofing and walls. Determinationof resistance to water penetration

B/546/5

EN 13135-1:2003+A1:2010Cranes. Equipment. Electrotechnical equipment

MHE/3/1

EN 13208:2003+A1:2010Food processing machinery. Vegetable peelers.Safety and hygiene requirements

MCE/3/5

EN 13398:2010Bitumen and bituminous binders.Determination of the elastic recovery ofmodified bitumen

PTI/13

EN 13399:2010Bitumen and bituminous binders.Determination of storage stability of modifiedbitumen

PTI/13

EN 13587:2010Bitumen and bituminous binders.Determination of the tensile properties ofbituminous binders by the tensile test method

PTI/13

EN 13632:2010Bitumen and bituminous binders. Visualisationof polymer dispersion in polymer modifiedbitumen

PTI/13

EN 13702:2010Bitumen and bituminous binders.Determination of dynamic viscosity of modifiedbitumen by cone and plate method

PTI/13

EN 13766:2010Thermoplastic multi-layer (non-vulcanized)hoses and hose assemblies for the transfer ofliquid petroleum gas and liquefied natural gas.Specification

PRI/66

EN 14081-2:2010Timber structures. Strength graded structuraltimber with rectangular cross section. Machinegrading. Additional requirements for initialtype testing

B/518

EN 14224:2010Flexible sheets for waterproofing.Waterproofing of concrete bridge decks andother concrete surfaces trafficable by vehicles.Determination of crack bridging ability

B/546/9

EN 14490:2010Execution of special geotechnical works. Soilnailing

B/526/4

CEN European Standards continued...


EN 50329:—Railway applications. Fixed installations.Traction transformers

AMENDMENT 1:May 2010

to EN 50329:2003GEL/9/3

EN 50340:2010Hydraulic cable cutting devices. Devices to beused on electrical installations with nominalvoltage up to AC 30 kV

PEL/78

EN 50367:—Railway applications. Current collection systems.Technical criteria for the interaction betweenpantograph and overhead line (to achieve freeaccess)

CORRIGENDUM 1:May 2010

to EN 50367:2006GEL/9/3

EN 50388:—Railway applications. Power supply and rollingstock. Technical criteria for the coordinationbetween power supply (substation) and rollingstock to achieve interoperability


to EN 50388:2005GEL/9/3

EN 50528:2010Insulating ladders for use on or near lowvoltage electrical installations

PEL/78

EN 60068-2-53:2010(IEC 60068-2-53:2008)Environmental testing. Tests and guidance.Combined climatic (temperature/humidity) anddynamic (vibration/shock) tests

GEL/104

EN 60079-15:2010(IEC 60079-15:2010)Explosive atmospheres. Equipment protectionby type of protection “n”

GEL/31/14

EN 60191-6-19:2010(IEC 60191-6-19:2010)Mechanical standardization of semiconductordevices. Measurement methods of the packagewarpage at elevated temperature and themaximum permissible warpage

EPL/47

EN 60317-8:2010(IEC 60317-8:2010)Specifications for particular types of windingwires. Polyesterimide enamelled round copperwire, class 180

GEL/55

EN 50129:—Railway applications. Communication, signallingand processing systems. Safety relatedelectronic systems for signalling


to EN 50129:2003GEL/9

EN 50149:—Railway applications. Fixed installations. Electrictraction. Copper and copper alloy groovedcontact wires


to EN 50149:2001GEL/9

EN 50155:—Railway applications. Electronic equipment usedon rolling stock


to EN 50155:2001GEL/9

EN 50206-1:—Railway applications. Rolling stock.Pantographs. Characteristics and tests.Pantographs for main line vehicles


to EN 50206-1:1998GEL/9

EN 50206-1:2010Railway applications. Rolling stock.Pantographs. Characteristics and tests.Pantographs for main line vehicles

GEL/9/2

EN 50206-2:2010Railway applications. Rolling stock.Pantographs. Characteristics and tests.Pantographs for metros and light rail vehicles

GEL/9/2

EN 50223:2010Stationary electrostatic application equipmentfor ignitable flock material. Safety requirements

GEL/31

EN 50290-2-27:—Communication cables. Common design rulesand construction. Halogen free flame retardantthermoplastic sheathing compounds


to EN 50290-2-27:2002+A1:2007EPL/46

EN 50317:—Railway applications. Current collection systems.Requirements for and validation ofmeasurements of the dynamic interactionbetween pantograph and overhead contact line


to EN 50317:2002+A2:2007GEL/9/3

CEN TECHNICALSPECIFICATIONS

CEN/TS 15401:2010Solid recovered fuels. Determination of bulkdensity

PTI/17

CEN/TS 15412:2010Solid recovered fuels. Methods for thedetermination of metallic aluminium

PTI/17

CEN/TS 15414-1:2010Solid recovered fuels. Determination ofmoisture content using the oven dry method.Determination of total moisture by a referencemethod

PTI/17

CEN/TS 15414-2:2010Solid recovered fuels. Determination ofmoisture content using the oven dry method.Determination of total moisture by a simplifiedmethod

PTI/17

CENELEC PUBLICATIONS

EUROPEAN RATIFIED TEXTS

The documents listed below have recentlybeen issued by CENELEC but have not yetbeen published as BS ENs. BSI has anobligation to adopt all ENs and towithdraw any conflicting BritishStandards (BSs) or parts of BSs. Thefollowing will be implemented as BS ENsor as amendments to BS ENs shortly.Notification of their implementation willbe given in the BS EN Publications sectionof the relevant edition of UpdateStandards.

EN 50126-1:—Railway applications. The specification anddemonstration of Reliability, Availability,Maintainability and Safety (RAMS). Basicrequirements and generic process


to EN 50126-1:1999GEL/9

EN 50128:—Railway applications. Communications,signalling and processing systems. Software forrailway control and protection systems


to EN 50128:2001GEL/9


EN 61508-2:2010(IEC 61508-2:2010)Functional safety ofelectrical/electronic/programmable electronicsafety-related systems. Requirements forelectrical/electronic/programmable electronicsafety-related systems

GEL/65/1

EN 61508-3:2010(IEC 61508-3:2010)Functional safety ofelectrical/electronic/programmable electronicsafety-related systems. Software requirements

GEL/65/1

EN 61508-4:2010(IEC 61508-4:2010)Functional safety ofelectrical/electronic/programmable electronicsafety-related systems. Definitions andabbreviations

GEL/65/1

EN 61508-5:2010(IEC 61508-5:2010)Functional safety ofelectrical/electronic/programmable electronicsafety-related systems. Examples of methods forthe determination of safety integrity levels

GEL/65/1

EN 61508-6:2010(IEC 61508-6:2010)Functional safety ofelectrical/electronic/programmable electronicsafety-related systems. Guidelines on theapplication of IEC 61508-2 and IEC 61508-3

GEL/65/1

EN 61508-7:2010(IEC 61508-7:2010)Functional safety ofelectrical/electronic/programmable electronicsafety-related systems. Overview of techniquesand measures

GEL/65/1

EN 61549:—(IEC 61549:2003/A2:2010)Miscellaneous lamps


to EN 61549:2003CPL/34/1

EN 61747-5-3:2010(IEC 61747-5-3:2009)Liquid crystal display devices. Environmental,endurance and mechanical test methods. Glassstrength and reliability

EPL/47

EN 62077:2010(IEC 62077:2010)Fibre optic interconnecting devices and passivecomponents. Fibre optic circulators. Genericspecification

GEL/86/2

EN 60335-2-52:—Household and similar electrical appliances.Safety. Particular requirements for oral hygieneappliances


to EN 60335-2-52:2003CPL/61/01

EN 60512-7-1:2010(IEC 60512-7-1:2010)Connectors for electronic equipment. Tests andmeasurements. Impact tests (free connectors).Test 7a. Free fall (repeated)

EPL/48

EN 60512-9-5:2010(IEC 60512-9-5:2010)Connectors for electronic equipment. Tests andmeasurements. Endurance tests. Test 9e.Current loading, cyclic

EPL/48

EN 60601-2-28:2010(IEC 60601-2-28:2010)Medical electrical equipment. Particularrequirements for the basic safety and essentialperformance of x-ray tube assemblies formedical diagnosis

CH/62/2

EN 60709:2010(IEC 60709:2004)Nuclear power plants. Instrumentation andcontrol systems important to safety. Separation

NCE/8

EN 61243-3:2010(IEC 61243-3:2009)Live working. Voltage detectors. Two-pole low-voltage type

PEL/78

EN 61340-5-3:2010(IEC 61340-5-3:2010)Electrostatics. Protection of electronic devicesfrom electrostatic phenomena. Properties andrequirements classifications for packagingintended for electrostatic discharge sensitivedevices

GEL/101

EN 61360-1:2010(IEC 61360-1:2009)Standard data elements types with associatedclassification scheme for electric items.Definitions. Principles and methods

GEL/3

EN 61508-1:2010(IEC 61508-1:2010)Functional safety ofelectrical/electronic/programmable electronicsafety-related systems. General requirements

GEL/65/1

EN 60317-13:2010(IEC 60317-13:2010)Specifications for particular types of windingwires. Polyester or polyesterimide overcoatedwith polyamide-imide enamelled round copperwire, class 200

GEL/55

EN 60318-4:2010(IEC 60318-4:2010)Electroacoustics. Simulators of human head andear. Occluded-ear simulator for themeasurement of earphones coupled to the earby means of ear inserts

EPL/29

EN 60335-1:—(IEC 60335-1:2001)Household and similar electrical appliances.Safety. General requirements


to EN 60335-1:2002CPL/61

EN 60335-2-2:—Household and similar electrical appliances.Safety. Particular requirements for vacuumcleaners and water-suction cleaning appliances


to EN 60335-2-2:2003CPL/61/01

EN 60335-2-3:—Household and similar electrical appliances.Safety. Particular requirements for electric irons


to EN 60335-2-3:2002CPL/61/07

EN 60335-2-6:—Household and similar electrical appliances.Safety. Particular requirements for stationarycooking ranges, hobs, ovens and similarappliances


to EN 60335-2-6:2003CPL/61/07

EN 60335-2-7:—Household and similar electrical appliances.Safety. Particular requirements for washingmachines


to EN 60335-2-7:2003CPL/61/14

EN 60335-2-23:—Household and similar electrical appliances.Safety. Particular requirements for appliancesfor skin or hair care


to EN 60335-2-23:2003CPL/61/01

CENELEC Publications continued...


IEC 60745-2-17:2010(Edition 3)

Hand-held motor-operated electric tools. Safety.Particular requirements for routers andtrimmers£128.40 members, £135.16 non-members

CPL/116

IEC 60745-2-19:—Hand-held motor-operated electric tools. Safety.Particular requirements for jointers


to IEC 60745-2-19:2005£15.41 members, £16.22 non-members

CPL/116

IEC 60793-1-30:2010(Edition 2)

Optical fibres. Measurement methods and testprocedures. Fibre proof test£51.37 members, £54.07 non-members

GEL/86/1

IEC 60793-1-31:2010(Edition 2)

Optical fibres. Measurement methods and testprocedures. Tensile strength£89.89 members, £94.62 non-members

GEL/86/1

IEC 60793-1-32:2010(Edition 2)

Optical fibres. Measurement methods and testprocedures. Coating strippability£42.80 members, £45.05 non-members

GEL/86/1

IEC 61029-2-12:2010Safety of transportable motor-operated electrictools. Particular requirements for threadingmachines£51.37 members, £54.07 non-members

CPL/116

IEC 61108-3:2010Maritime navigation and radiocommunicationequipment and systems. Global navigationsatellite systems (GNSS). Galileo receiverequipment. Performance requirements,methods of testing and required test results£184.05 members, £193.74 non-members

EPL/80

IEC 61207-1:2010(Edition 2)

Expression of performance of gas analyzers.General£141.25 members, £148.68 non-members

GEL/65/2

IEC 60269-1:—Low-voltage fuses. General requirements

AMENDMENT 1:April 2009

to IEC 60269-1:2006£55.64 members, £58.57 non-members

PEL/32

IEC 60269-3:2010(Edition 4)

Low-voltage fuses. Supplementary requirementsfor fuses for use by unskilled persons (fusesmainly for household and similar applications).Examples of standardized systems of fuses A toF£231.14 members, £243.30 non-members

PEL/32

IEC 60335-1:2010(Edition 5)

Household and similar electrical appliances.Safety. General requirements£235.41 members, £247.80 non-members

CPL/61

IEC 60335-2-109:2010Household and similar electrical appliances.Safety. Particular requirements for UV radiationwater treatment appliances£68.49 members, £72.09 non-members

CPL/61/01

IEC 60364-4-42:2010(Edition 3)

Low-voltage electrical installations. Protectionfor safety. Protection against thermal effects£89.89 members, £94.62 non-members

JPEL/64

IEC 60364-7-702:2010(Edition 3)

Low-voltage electrical installations.Requirements for special installations orlocations. Swimming pools and fountains£89.89 members, £94.62 non-members

JPEL/64

IEC 60695-6-1:—Fire hazard testing. Smoke obscuration. Generalguidance



GEL/89

IEC 60745-2-14:—Hand-held motor-operated electric tools. Safety.Particular requirements for planers



CPL/116

EN 62340:2010(IEC 62340:2007)Instrumentation and control systems importantto safety. Requirements for coping withCommon Cause Failure (CCF)

NCE/8

EN 62616:2010(IEC 62616:2010)Maritime navigation and radiocommunicationequipment and systems. Bridge navigationalwatch alarm system (BNWAS)

EPL/80

CENELEC REPORTS

CLC/TR 50552:2010Home and Building Electronic Systems (HBES).Open communication system. Interfaces.Medium interface, twisted pair, class 1

IST/6/-/12

CLC/TR 50555:2010Interruption indexes

GEL/8

CENELEC TECHNICALSPECIFICATIONS

CLC/TS 50539-22:2010Low-voltage surge protective devices. Surgeprotective devices for specific applicationincluding D.C. Selection and applicationprinciples. Wind turbine applications

PEL/37/1

HARMONIZATIONDOCUMENTS

CENELEC HD 60364-4-444:2010(IEC 60364-4-44:2007)Low-voltage electrical installations. Protectionfor safety. Protection against voltagedisturbances and electromagnetic disturbances£71.00 members, £142.00 non-members

JPEL/64

IEC PUBLICATIONS

It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.

The following IEC publications areavailable from BSI Customer Services (see’How to order’ on page 2)

IEC 60027-7:2010Letter symbols to be used in electricaltechnology. Power generation, transmission,and distribution£115.57 members, £121.65 non-members

SS/7

CENELEC Publications continued...


ISO PUBLICATIONS

It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.

The following ISO publications areavailable from BSI Customer Services (see’How to order’ on page 2)

ISO 179-1:2010(Edition 2)

Plastics. Determination of Charpy impactproperties. Non-instrumented impact test£60.67 members, £63.86 non-members

PRI/21

Will be implemented as an identical British Standard

ISO/TR 230-8:2010(Edition 2)

Test code for machine tools. Vibrations£119.04 members, £125.30 non-members

MTE/1/2


ISO 1211:2010(Edition 3)

Milk. Determination of fat content. Gravimetricmethod (Reference method)£52.65 members, £55.42 non-members

AW/5



Reaction to fire tests for building products.Determination of the gross heat of combustion(calorific value). Determination of the heat ofcombustion£64.10 members, £67.47 non-members

FSH/21/1



Cheese and processed cheese products.Determination of total phosphorus content.Molecular absorption spectrometric method£28.61 members, £30.12 non-members

AW/5



Fire-resistance tests. Door and shutterassemblies£85.84 members, £90.36 non-members

FSH/22

Will not be implemented as a British Standard

IEC 62465:2010Nuclear power plants. Instrumentation andcontrol important to safety. Management ofageing of electrical cabling systems£128.40 members, £135.16 non-members

NCE/8

IEC 62484:2010Radiation protection instrumentation.Spectroscopy-based portal monitors used forthe detection and identification of illicittrafficking of radioactive material£141.25 members, £148.68 non-members

NCE/2

IEC/TS 62579:2010Multimedia home server systems. Conceptualmodel for domain management£128.40 members, £135.16 non-members

EPL/100

IEC 62599-1:2010Alarm systems. Environmental test methods£141.25 members, £148.68 non-members

GW/1/1

IEC 62599-2:2010Alarm systems. Electromagnetic compatibility.Immunity requirements for components of fireand security alarm systems£102.72 members, £108.13 non-members

GW/1/1

IEC 62615:2010Electrostatic discharge sensitivity testing.Transmission line pulse (TLP). Component level£77.05 members, £81.10 non-members

EPL/47

IEC/TR 62617:2010Home laundry appliances. Uncertainty reportingof measurements£51.37 members, £54.07 non-members

CPL/59/1

IEC/PAS PUBLICATIONS

IEC/PAS 61338-1-5:2010Waveguide type dielectric resonators. Generalinformation and test conditions. Measurementmethod of conductivity at interface betweenconductor layer and dielectric substrate atmicrowave frequency£77.05 members, £81.10 non-members

EPL/49

IEC 61834-4:—Recording. Helical-scan digital video cassetterecording system using 6,35 mm magnetic tapefor consumer use (525-60, 625-50, 1125-60 and1250-50 systems). Pack header table andcontents



EPL/100

IEC 61937-11:2010Digital audio. Interface for non-linear PCMencoded audio bitstreams applying IEC 60958.MPEG-4 AAC and its extensions in LATM/LOAS£59.93 members, £63.08 non-members

EPL/100

IEC 61937-12:2010Digital audio. Interface for non-linear PCMencoded audio bitstreams applying IEC 60958.Non-linear PCM bitstreams according to theDRA formats£55.64 members, £58.57 non-members

EPL/100

IEC/TR 61967-1-1:2010Integrated circuits. Measurement ofelectromagnetic emissions. General conditionsand definitions. Near-field scan data exchangeformat£184.05 members, £193.74 non-members

EPL/47

IEC/TR 62153-4-1:2010(Edition 2)

Metallic communication cable test methods.Electromagnetic compatibility (EMC).Introduction to electromagnetic (EMC)screening measurements£205.45 members, £216.26 non-members

EPL/46

IEC 62271-101:—High-voltage switchgear and controlgear.Synthetic testing



PEL/17/1

IEC/TR 62362:2010Selection of optical fibre cable specificationsrelative to mechanical, ingress, climatic orelectromagnetic characteristics. Guidance£77.05 members, £81.10 non-members

GEL/86/1

IEC 62415:2010Semiconductor devices. Constant currentelectromigration test£47.08 members, £49.56 non-members

EPL/47


To order visit


ISO 7867-2:—Tyres and rims (metric series) for agriculturaltractors and machines. Service description andload ratings


to ISO 7867-2:2005£9.16 members, £9.64 non-members

AUE/4


ISO 8536-2:—Infusion equipment for medical use. Closuresfor infusion bottles


to ISO 8536-2:2010CH/212


ISO 8664:—Tyres for agricultural tractors and machines.Code-designated and service-descriptionmarked radial drive-wheel tyres


to ISO 8664:2005£9.16 members, £9.64 non-members

AUE/4


ISO 8820-3:2010(Edition 3)

Road vehicles. Fuse-links. Fuse-links with tabs(blade type) Type C (medium), Type E (highcurrent) and Type F (miniature)£49.22 members, £51.81 non-members

AUE/16



Oil of juniper berry (Juniperus communis L.)£33.19 members, £34.94 non-members

AW/54


ISO 9239-1:2010(Edition 3)

Reaction to fire tests for floorings.Determination of the burning behaviour usinga radiant heat source£64.10 members, £67.47 non-members

FSH/21/1


ISO/IEC 9798-3:—Information technology. Security techniques.Entity authentication. Mechanisms using digitalsignature techniques

AMENDMENT 1:June 2010

to ISO/IEC 9798-3:1998£9.16 members, £9.64 non-members

IST/33



Dried milk. Determination of titratable acidity(reference method)£25.18 members, £26.51 non-members

AW/5



Milk and milk products. Determination of ironcontent. Spectrometric method (referencemethod)£42.35 members, £44.58 non-members

AW/5


ISO 7010:—Graphical symbols. Safety colours and safetysigns. Safety signs used in workplaces andpublic areas



PH/8/1


ISO 7206-4:2010(Edition 3)

Implants for surgery. Partial and total hip jointprostheses. Determination of enduranceproperties and performance of stemmedfemoral components£45.78 members, £48.19 non-members

CH/150/4


ISO 7240-20:2010Fire detection and alarm systems. Aspiratingsmoke detectors£90.42 members, £95.18 non-members

FSH/12


ISO 7240-25:2010Fire detection and fire alarm systems.Components using radio transmission paths£81.26 members, £85.54 non-members

FSH/12


ISO 7752-1:2010(Edition 2)

Cranes. Control layout and characteristics.General principles£33.19 members, £34.94 non-members

MHE/3


ISO 7752-3:2010(Edition 2)

Cranes. Control layout and characteristics.Tower cranes£25.18 members, £26.51 non-members

MHE/3



Rubber hoses and tubing for cooling systemsfor internal-combustion engines. Specification£45.78 members, £48.19 non-members

PRI/66/-/2



Road vehicles. Calibration fluids for dieselinjection equipment£25.18 members, £26.51 non-members

MCE/22


ISO 4190-1:2010(Edition 4)

Lift (elevator) installation Class I, II, III and VIlifts£67.53 members, £71.08 non-members

MHE/4


ISO 4217:—Codes for the representation of currencies andfunds

CORRIGENDUM 1:October 2008

to ISO 4217:2008IST/12



Road vehicles. Visibility. Method forestablishment of eyellipses for driver’s eyelocation£74.39 members, £78.31 non-members

AUE/12


ISO 5457:—Technical product documentation. Sizes andlayout of drawing sheets



TDW/4



Caseins and caseinates. Determination of pH(reference method)£28.61 members, £30.12 non-members

AW/5



Hydraulic fluid power. Cylinders. Dimensionsand tolerances of housings for single-actingpiston and rod seals in reciprocatingapplications£49.22 members, £51.81 non-members

MCE/11


ISO Publications continued...


ISO 11363-2:2010Gas cylinders. 17E and 25E taper threads forconnection of valves to gas cylinders. Inspectiongauges


PVE/3/1


ISO 11639:2010Aerospace. Part numbering for hose assemblies


ACE/69


ISO/TR 11766:2010Intelligent transport systems. Communicationsaccess for land mobiles (CALM). Securityconsiderations for lawful interception


EPL/278


ISO 11784:—Radio frequency identification of animals. Codestructure. Indication of an advancedtransponder



AGE/6/1



Milk and milk products. Determination of zinccontent. Flame atomic absorption spectrometricmethod


AW/5


ISO 11953:2010Dentistry. Implants. Clinical performance ofhand torque instruments


CH/106/8



Milk. Determination of calcium content.Titrimetric method


AW/5


ISO 11093-5:—Paper and board. Testing of cores.Determination of characteristics of concentricrotation


to ISO 11093-5:2009

PAI/11



Acoustics. Noise emitted by machinery andequipment. Determination of emission soundpressure levels at a work station and at otherspecified positions in an essentially free fieldover a reflecting plane with negligibleenvironmental corrections


EH/1/4



Acoustics. Noise emitted by machinery andequipment. Determination of emission soundpressure levels at a work station and at otherspecified positions applying approximateenvironmental corrections


EH/1/4



Acoustics. Noise emitted by machinery andequipment. Determination of emission soundpressure levels at a work station and at otherspecified positions applying accurateenvironmental corrections


EH/1/4



Iron ore and direct reduced iron. Vocabulary


ISE/58


ISO 11363-1:2010Gas cylinders. 17E and 25E taper threads forconnection of valves to gas cylinders.Specifications


PVE/3/1


ISO 10052:—Acoustics. Field measurements of airborne andimpact sound insulation and of serviceequipment sound. Survey method



EH/1



Ophthalmic instruments. Eye refractometers


CH/172/6


ISO/IEC 10373-2:—Identification cards. Test methods. Cards withmagnetic stripes


to ISO/IEC 10373-2:2006IST/17



Water quality. Determination of pH


EH/3/2


ISO 10679:—Steel. Cast tool steel


to ISO 10679:2010ISE/111


ISO 10993-13:2010(Edition 2)

Biological evaluation of medical devices.Identification and quantification of degradationproducts from polymeric medical devices


CH/194



Rubber, raw synthetic. Determination ofantidegradants by high-performance liquidchromatography


PRI/23




ISO/IEC 14476-4:2010Information technology. Enhancedcommunications transport protocolSpecification of QoS management for duplexmulticast transport£52.65 members, £55.42 non-members

IST/6


ISO/IEC 14476-6:2010Information technology. Enhancedcommunications transport protocol.Specification of QoS management for n-plexmulticast transport£60.67 members, £63.86 non-members

IST/6


ISO/IEC 14496-1:2010(Edition 4)

Information technology. Coding of audio-visualobjects. Systems£128.19 members, £134.94 non-members

IST/37

Will not be implemented as a British Standard. Isapproved as suitable for use in the UK


Anaesthetic and respiratory equipment.Compatibility with oxygen£77.83 members, £81.93 non-members

CH/121/6


ISO/IEC 15421:2010(Edition 2)

Information technology. Automaticidentification and data capture techniques. Barcode master test specifications£37.77 members, £39.76 non-members

IST/34


ISO 15686-10:2010Buildings and constructed assets. Service lifeplanning. When to assess functionalperformance£77.83 members, £81.93 non-members

CB/101


ISO/IEC 15909-1:—Software and system engineering. High-levelpetri nets. Concepts, definitions and graphicalnotation



IST/15



Ophthalmic instruments. Trial frames£33.19 members, £34.94 non-members

CH/172/6


ISO 13091-1:—Mechanical vibration. Vibrotactile perceptionthresholds for the assessment of nervedysfunction. Methods of measurement at thefingertips



GME/21/6


ISO 13257:2010Thermoplastics piping systems for non-pressureapplications. Test method for resistance toelevated temperature cycling£33.19 members, £34.94 non-members

PRI/88/1


ISO 13264:2010Thermoplastics piping systems for non-pressureunderground drainage and sewerage.Thermoplastics fittings. Test method formechanical strength or flexibility of fabricatedfittings£28.61 members, £30.12 non-members

PRI/88/1


ISO 13268:2010Thermoplastics piping systems for non-pressureunderground drainage and sewerage.Thermoplastics shafts or risers for inspectionchambers and manholes. Determination of ringstiffness£37.77 members, £39.76 non-members

PRI/88/1


ISO 13674-1:2010(Edition 2)

Road vehicles. Test method for thequantification of on-centre handling. Weavetest£37.77 members, £39.76 non-members

AUE/15


ISO/IEC 13818-2:—Information technology. Generic coding ofmoving pictures and associated audioinformation. Video



IST/37


ISO 12117-2:—Earth-moving machinery. Laboratory tests andperformance requirements for protectivestructures of excavators. Roll-over protectivestructures (ROPS) for excavators of over 6 t

CORRIGENDUM 1:April 2010

to ISO 12117-2:2008B/513/1


ISO 12315:2010Aluminium oxide primarily used for productionof aluminium. Method for calculating theAl2O3 content of smelter grade alumina£25.18 members, £26.51 non-members

CII/24


ISO 12402-2:—Personal flotation devices. Lifejackets,performance level 275. Safety requirements



PH/3/6





PH/3/6





PH/3/6


ISO 12402-5:—Personal flotation devices. Buoyancy aids (level50). Safety requirements



PH/3/6


ISO 12402-6:—Personal flotation devices. Special purposelifejackets and buoyancy aids. Safetyrequirements and additional test methods



PH/3/6




ISO/TR 21828:2010Guidance on standards available forpreparation and testing of monolithic,unshaped refractory products


RPI/1


ISO 21927-2:—Smoke and heat control systems. Specificationfor natural smoke and heat exhaust ventilators



FSH/25


ISO 21927-3:—Smoke and heat control systems. Specificationfor powered smoke and heat exhaustventilators



FSH/25


ISO 21931-1:2010Sustainability in building construction.Framework for methods of assessment of theenvironmental performance of constructionworks. Buildings


B/558


ISO 22389-1:2010Timber structures. Bending strength of I-beams.Testing, evaluation and characterization


B/518


ISO/TS 22789:2010Health informatics. Conceptual framework forpatient findings and problems in terminologies


IST/35


ISO 23125:2010Machine tools. Safety. Turning machines


MTE/1/1


ISO 23461:2010Space systems. Programme management. Non-conformance control system


ACE/68/-/5



3-D scanning methodologies for internationallycompatible anthropometric databases


PH/9


ISO 21217:2010Intelligent transport systems. Communicationsaccess for land mobiles (CALM). Architecture


EPL/278


ISO 21258:2010Stationary source emissions. Determination ofthe mass concentration of dinitrogen monoxide(N2O). Reference method. Non-dispersiveinfrared method


EH/2/1


ISO/IEC/IEEE 214 50:2010Information technology. Smart transducerinterface for sensors and actuators. Commonfunctions, communication protocols, andTransducer Electronic Data Sheet (TEDS) formats


IST/34


ISO/IEC/IEEE 21451-1:2010Information technology. Smart transducerinterface for sensors and actuators. NetworkCapable Application Processor (NCAP)information model


IST/34


ISO/IEC/IEEE 21451-2:2010Information technology. Smart transducerinterface for sensors and actuators. Transducerto microprocessor communication protocols andTransducer Electronic Data Sheet (TEDS) formats


IST/34


ISO/IEC/IEEE 21451-4:2010Information technology. Smart transducerinterface for sensors and actuators. Mixed-mode communication protocols and TransducerElectronic Data Sheet (TEDS) formats


IST/34



Mobile elevating work platforms. Design,calculations, safety requirements and testmethods£109.88 members, £115.66 non-members

MHE/12

Will not be i mplemented as a British Standard

ISO 17631:—Ships and marine technology. Shipboard plansfor fire protection, life-saving appliances andmeans of escape



SME/32/-/1


ISO 17672:2010Brazing. Filler metals£60.67 members, £63.86 non-members

WEE/19


ISO 17893:—Steel wire ropes. Vocabulary, designation andclassification



MHE/2


ISO/TS 18152:2010Ergonomics of human-system interaction.Specification for the process assessment ofhuman-system issues£109.88 members, £115.66 non-members

PH/9


ISO 18192-2:2010Implants for surgery. Wear of totalintervertebral spinal disc prostheses. Nucleusreplacements£33.19 members, £34.94 non-members

CH/150/5



Please

do not send

confirmation

of

orders placed by

telephone

as it can lead to

duplication

ISO/IEC 29500-4:—Information technology. Document descriptionand processing languages. Office Open XML FileFormats Transitional Migration Features


to ISO/IEC 29500-4:2008IST/41


ISO/TS 29585:2010Health informatics. Deployment of a clinicaldata warehouse£90.42 members, £95.18 non-members

IST/35


ISO 29621:2010Cosmetics. Microbiology. Guidelines for the riskassessment and identification ofmicrobiologically low-risk products£37.77 members, £39.76 non-members

CW/217


ISO/PAS PUBLICATIONS

ISO/PAS 17004:2005Conformity assessment. Disclosure ofinformation. Principles and requirements£25.18 members, £26.51 non-members

CAS/1

ISO/PAS 30006:2010Ship recycling management systems. Diagramsto show the location of hazardous materialsonboard ships£37.77 members, £39.76 non-members

SME/32

ISO/PAS 30007:2010Ships and marine technology. Measures toprevent asbestos emission and exposure duringship recycling£49.22 members, £51.81 non-members

SME/32

ISO 27407:2010Hydraulic fluid power. Marking of performancecharacteristics on hydraulic filters£42.35 members, £44.58 non-members

MCE/18/-/6


ISO 28319:2010Dentistry. Laser welding£45.78 members, £48.19 non-members

CH/106/2


ISO 28641:2010Rubber compounding ingredients. Organicchemicals. General test methods£85.84 members, £90.36 non-members

PRI/23


ISO/TS 29001:2010(Edition 3)

Petroleum, petrochemical and natural gasindustries. Sector-specific quality managementsystems. Requirements for product and servicesupply organizations£70.97 members, £74.70 non-members

PSE/17


ISO/IEC 29133:2010Information technology. Automaticidentification and data capture techniques.Quality test specification for rewritable hybridmedia data carriers£56.09 members, £59.04 non-members

IST/34


ISO 29301:2010Microbeam analysis. Analytical transmissionelectron microscopy. Methods for calibratingimage magnification by using referencematerials having periodic structures£77.83 members, £81.93 non-members

CII/9


ISO/IEC 29500-2:—Information technology. Document descriptionand processing languages. Office Open XML FileFormats Open Packaging Conventions


to ISO/IEC 29500-2:2008IST/41


ISO/IEC 29500-3:—Information technology. Document descriptionand processing languages. Office Open XML FileFormats Markup Compatibility and Extensibility


to ISO/IEC 29500-3:2008IST/41


ISO 23519:2010Sintered metal materials, excluding hardmetals.Measurement of surface roughness£28.61 members, £30.12 non-members

ISE/65


ISO 25119-1:2010Tractors and machinery for agriculture andforestry. Safety-related parts of control systems.General principles for design and development£64.10 members, £67.47 non-members

AGE/6


ISO 25119-2:2010Tractors and machinery for agriculture andforestry. Safety-related parts of control systems.Concept phase£77.83 members, £81.93 non-members

AGE/6


ISO 25119-3:2010Tractors and machinery for agriculture andforestry. Safety-related parts of control systems.Series development, hardware and software£90.42 members, £95.18 non-members

AGE/6


ISO 25119-4:2010Tractors and machinery for agriculture andforestry. Safety-related parts of control systems.Production, operation, modification andsupporting processes£60.67 members, £63.86 non-members

AGE/6


ISO 25498:2010Microbeam analysis. Analytical electronmicroscopy. Selected-area electron diffractionanalysis using a transmission electronmicroscope£67.53 members, £71.08 non-members

CII/9


ISO 26142:2010Hydrogen detection apparatus. Stationaryapplications£67.53 members, £71.08 non-members

PVE/3/8


ISO 26462:2010Milk. Determination of lactose content.Enzymatic method using difference in pH£42.35 members, £44.58 non-members

AW/5




Help Us to Help

You!

Always quote your Customer Number

Don’t know your number?

Contact Customer Services

020 8996 9001

who will be happy to check it for you