Upload
others
View
59
Download
0
Embed Size (px)
Citation preview
BS 5315KM06246
ISO 9001FM00547
ISO 14001EMS573195
BS 5315KM06246
HHoossee CClliippssJubilee® is the original worm drive hose clip and for more than ninety years the company has supplied both original equipment and resale customers worldwide.
From the original patents to the current BS requirements, the company has led the world with consistent high quality product; combined with this is the eye catching point of sale material and practical packaging.
The comprehensive range of products enables users everywhere to be confident that Jubilee® has a clip to suit their application.
JJuubbiilleeee�� tthhee oorriiggiinnaall –– bbeewwaarree ooff iimmiittaattiioonnss!!Jubilee clips are Kitemarked to BS 5315:1991 and the company is registered to BS EN ISO 9001:2008 Quality Management System and ISO 14001 Environmental Management System.
Jubilee® was instrumental in the formulation of the original British Standard in 1963 and, as users all over the world will testify, the consistent reliability of our product has set Jubilee®
clips apart from its' competitors.
With over 90 years experience, we know exactly how to manufacture our clips to deliver the results our customers demand. We have a stringent quality control process - from raw material to finished product - and all product ranges are systematically checked to their various Standards during manufacture and packing.
All Jubilee® products conform to the latest EU Directives; furthermore we aim to work in a socially, ethically and environmentally responsible way ensuring that our manufacturing processes conform to environmental legislations. We continue to decrease the effect that our manufacturing output has on the environment and improve our packaging waste year on year, recycling as much as is possible.
ISO 9001FM00547
ISO 14001EMS573195
TTeesstt PPeerrffoorrmmaannccee
Ultimate Breaking Torque Graph
To
rqu
e(N
m)
Housing Group Sizesstraight line test
The performance of hose clips is determined by the hose type, spigot, tightening torque and hose working pressures – phone for technical advice.
Maximum Pressure Graph
0
2
4
6
8
10
12
14
16
18
000-1A (9.5-30mm) 1-3 (30-70mm) 3X-6 (70-140mm)
Pre
ssu
reh
eld
(Ba
r)
BS RequirementJubilee (Minimum)
Size Range
MMiilldd SStteeeell ZZiinncc PPrrootteecctteedd && SSttaaiinnlleessss SStteeeell CClliippss
JUBILEE® RANGEAdjustmentSize
Ref.BSNo. mm Inches
BandWidth (mm)
BandThickness
(mm)
CartonQty.
PackQty.
WeightsPer 100
(kgs)
SizeRef.
000M000000X1A11X1M2A22X33X44X566X77½ 8½9½10½11½12½
121620222530354045505560708090
100120140150165190216242267292318
9.5- 1211- 1613- 2016- 2218- 2522- 3025- 3530- 4032- 4535- 5040- 5545- 6055- 7060- 8070- 9085-10090-120
110-140120-150135-165158-190184-216210-242235-267260-292286-318
3/8- ½½-5/8½-¾
5/8- 7/8¾-1
7/8-11/81-13/8
11/8-15/811/4-1¾13/8-2
15/8-21/81¾ -23/821/8-23/423/8-31/82¾-3½3¼-4
3½-4¾43/8 -5½4¾-57/85¼-6½6¼-7½7¼-8½8¼-9½9¼-10½
10¼-11½11¼-12½
9.99.99.91313131313131313131313131313131313131313131313
0.7620.7620.7620.9140.9140.9140.9140.9140.9140.9140.9140.9140.9140.9140.9140.9140.9140.9140.9140.9140.9140.9140.9140.9140.9140.914
10101010101010101010101010
100100100100100100100100100100100100
50150125100100
755050505050505050
1.21.31.32.22.32.83.03.13.23.94.04.24.54.85.15.46.06.97.17.68.59.19.9
10.511.312.2
000M00
000
0X1A
11X1M2A
22X
33X
44X
56
6X7
7½ 8½9½
10½11½12½
MATERIAL SPECIFICATIONMaterial Mild Steel 304 Stainless Steel 316 Stainless Steel
Band:Housing:Screw:
Zinc Finish:
BS 1449 Pt. 1BS 1449 Pt. 1
BS 3111Meets BS 7479 48 hrs NSS
All componentsType 304 (A2)BS 1449 Pt. 2DIN 1.4301
All componentsType 316 (A4)BS 1449 Pt. 2DIN 1.4401
For larger sizes please contact us.
DDrriivveerr SSeelleeccttiioonn
Jubilee Flexidriver� - flexible shaft tool for efficient and rapid adjustment of Jubilee clips
Jubilee Clipdriver� - rigid shaft tool for easy adjustment of Jubilee clips.
Available in 95mm & 160mm lengths.
[Top: Jubilee Flexidriver� Middle: 160mm Jubilee Clipdriver� Bottom: 95mm Jubilee Clipdriver�]
High precision tools specifically designed for efficient, rapid and easy adjustment of Jubilee clips to their optimum torque. The invaluable Flexidriver with flexible shaft has been designed to reach all those awkward places while the Clipdriver has a rigid shaft and is available in two lengths (95mm & 160mm).
The ‘drivers are high quality precision tools incorporating a 7mm A/F socket head specially designed for Jubilee� hose clips.
Suitable for most workshops, maintenance and DIY applications.
SSuuppeerrccllaammppssHeavy Duty Bolt Clamps
for use on heavy duty hoses
Mild steel zinc plated product specification:-
Part No.
Min-MaxDia. mm
ScrewDIN 933[A]
BandWidth
mm[B]
BandThickness
mm[C]
TighteningTorque
Nm
Screw Head
A/F mm[D]
Qty.PerBox
WeightPer BoxKgs
JSC019JSC022JSC025JSC028JSC031
17-1920-2223-2526-2829-31
M5 18 0.6 6 8100 100100100100
2.82.93.13.23.3
JSC035JSC039JSC043JSC047JSC051JSC055JSC059JSC063
32-3536-3940-4344-4748-5152-5556-5960-63
M6 20 1 8 10
10090757570605040
7.36.75.75.86.05.04.43.6
JSC067JSC073JSC079JSC085JSC091JSC097JSC103JSC112JSC121JSC130JSC139
64-6768-7374-7980-8586-9192-9798-103
104-112113-121122-130131-139
M8 25 1.5 25 13
6052484436322424201616
11.810.910.7
9.17.27.35.65.95.04.34.4
JSC148JSC161JSC174JSC187JSC200JSC213JSC226JSC239JSC252JSC265
140-148149-161162-174175-187188-200201-213214-226227-239240-252253-265
M8 25 1.8 25 13
128
4228282814141414
3.82.5
14.210.210.210.5
6.06.06.36.3
Used for demanding applications, the Jubilee Superclamp is easily adjusted by a single nut and bolt.
Available in:- Mild steel zinc plated 304 (A2) (W4) stainless steel 316 (A4) (W5) stainless steel
Jubilee� is a registered trade mark of L Robinson & Co (Gillingham) Limited.
304 & 316 S/S Clamps – Please contact us for the full product specification
B
A
C
D
B
HHiigghh TToorrqquueeFor applications requiring extra high levels of tightening torque
Twice the tightening torque of standard worm drive hose clips which creates more than twice the band tension for those stubborn leakage and high vibration applications.
All stainless steel construction.
Breaking torque of Jubilee high torque is 17 Nm comparable to conventional ‘T’ bolt clamp of equal size.
Recommended tightening torque 11.9 Nm (106 lb in).
Jubilee High Torque clips for applications that require extra high levels of tightening torque.
They can be used on hose applications such as spiral wound wire reinforced suction hose.
High Torque clips are appropriate in those heavy duty situations where the general British Standard product is not suitable.
Ask our Sales Department for further information.
MATERIAL SPECIFICATIONStainless Steel
Band:Housing:Screw:
BS/AISI 304 A2BS/AISI 304 A2BS/AISI 410
Working DiameterSize No. mm Inches
BoxQuantities
HT035HT040HT045HT050HT070HT080HT095HT100HT120HT140HT160HT180HT200HT220HT240HT260HT280HT300HT320HT340HT360HT380HT400HT420 HT440 HT460 HT480HT500
20- 3525- 4025- 4530- 5040- 7060- 8070- 9580-10090-120
110-140130-160150-180170-200190-220210-240230-260250-280270-300290-320310-340330-360350-380370-400390-420410-440430-460450-480470-500
3/4 - 13/81 - 15/81 - 1¾
11/4 - 215/8 - 23/423/8 - 31/82¾ - 3¾ 31/8 - 43½ - 4¾ 43/8 - 5½ 51/8 - 6¼
5 7/8 - 763/4 - 77/87½ - 85/8 8¼ - 9½
9 - 10¼97/8 - 11
105/8 - 11¾ 113/8 - 12½ 12¼ - 133/8
13 - 141/813¾ - 1514½ - 15¾ 153/8 - 16½ 161/8 - 17¼
17 - 181/817¾ - 187/818½ - 195/8
50505050505050505050505025252525252525252525252525252525
MMuullttiibbaanndd“SNIP THE CLIP”
Don’t get caught out in an emergency……. Choose Jubilee� Multiband to make a clip to any size Quick, versatile and handy Simply cut to length, add a housing, insert a screw and tighten to size
Did you know?……. The Jubilee� Multiband range is available in:-
Every toolbox should have a versatile Multiband handy pack containing all you need to make your own fastener
11MM ZINC PLATED MILD STEEL:-MB1701 Banding in dispensers containing 10 metresMB1702 Banding in dispensers containing 30 metresMB1703 Housings/screws in boxes containing 100 setsMB1704 Housings/screws in boxes containing 25 setsMB1705 Housings/Allen socket screws in boxes containing 100 setsMB1706 Captive screws in boxes containing 100MB1708 Handy Pack (10 metres of band with 25 housings/screws)
11MM STAINLESS STEEL (304):-MB1802 Banding in dispensers containing 30 metresMB1803 Housings/screws in boxes containing 100 setsMB1804 Housings/Allen socket screws in boxes containing 100 setsMB1805 Captive screws in boxes containing 100MB1806 Handy Pack (10 metres of band with 25 housings/screws)
7MM SLIMLINE STAINLESS STEEL (304):-MB1601 Banding in dispensers containing 25 metresMB1602 Banding in dispensers containing 50 metresMB1603 Flip/Lock housings/screws in boxes containing 25 setsMB1604 Flip/Lock housings/screws in boxes containing 100 sets
Captive Screw11mm zinc platedmild steel or stainless steel.
Allen Screw11mm zinc platedmild steel or stainless steel.(3/16”)
Slotted Screw11mm zinc platedmild steel or stainless steel.
Flip/Lock Screw7mm all stainless steel.
‘‘OO’’ CClliippss2-Ear Clamps from Tube
Available in: Mild steel zinc plated, clear
passivated Stainless steel 304
(special order)
Pincers:
Normal Closing (Part No. 1098)Side Closing* (Part No. 1099)**For use when access to ear is difficult
2-Ear clamp widely used for maintenance and OEM applications. Mainly used on air, fluid, gas and steam lines, also suitable for low pressure hydraulic applications.
Ideal for where the requirement is for a neat finish with no bulky housing to catch on obstructions.
Pincers are used to crimp the ears of the clamps and affect a proper seal.
Part No.TheoreticalClamping
Range mmWidthmm
Thicknessmm
Inner Widthof Earmm
PolybagPackQty.
OC0041OC0045OC0305OC0507OC0709OC0811OC0911OC1113OC1315OC1517OC1518OC1619OC1720OC1922OC2023OC2225OC2327OC2528OC2731OC2831OC3134OC3437OC3740OC4043OC4346
3.1-4.13.5-4.53.0-5.05.0-7.07.0-9.08.0-11.09.0-11.0
11.0-13.013.0-15.015.0-17.015.0-18.016.0-19.017.0-20.019.0-22.020.0-23.022.0-25.023.0-27.025.0-28.027.0-31.028.0-31.031.0-34.034.0-37.037.0-40.040.0-43.043.0-46.0
3.53.55.06.07.07.07.07.07.58.08.08.08.59.09.0
10.010.010.010.010.010.010.010.010.010.0
0.50.60.70.71.01.01.01.01.01.21.21.21.21.51.51.51.51.51.51.51.51.51.51.51.5
1.51.52.53.03.24.53.53.54.05.05.05.06.06.56.56.57.06.57.56.57.58.08.08.58.5
50505050505050505050505050505025252525252525252525
Where access to ear isdifficult, use side closing pincers.
When installing ‘O’ clips, please note Position clip on hose as illustrated. Give each ear a firm squeeze that each ear must be crimped as with your pincers. recommended to obtain a proper seal.An incorrectly made installation mayimpair the best connection. If a clampear can be closed all the way, the clipsize selected is probably too big and the next smaller size should be ordered.
Grip the outer edge of ear firmly and Cut the ear by taking several small Then grip ear firmly and cut through it with either pincers. bites at its base with either pincers. twist it off.
While both ears must be closed all the way to effect a proper seal, 2-ear clamps are best installed with one ear closed all the way first. The second ear is then closed so that the first ear opens slightly (gap to be approximately 1.5mm). This builds a resilient strength into the clamp in a spring-like action to hold against pressure, vibration and hose shrinkage due to temperature changes or ageing.
‘‘OO’’ CClliippss KKiitt fromThe ‘O’ clip kit is a versatile and convenient dispenser for the most popular sizes of double ear clips.
The kit comes complete with/without normal closing pincer and is ideal for the user who needs to have a selection of different size clips available when on the move.
Total contents: 175 ‘O’ clips +/- normal closing pincer
Rubber hose, plastic tubing, coaxial, rope and electrical cable are all easily clamped with this product.
The one piece design offers a positive, tamper-proof seal without damage to the hose.
Jubilee ’O’ clips assure adequate closure and will compensate for tolerance variations in hose sizes.
CONTENTSQuantity Part
No.Clamping
RangeNominal
Size202020202015202020
OC0507OC0709OC0811OC0911OC1113OC1315OC1517OC1518OC1720
5- 7mm 7- 9mm8-11mm9-11mm
11-13mm13-15mm15-17mm15-18mm17-20mm
1/4”5/16”3/8”
7/16”1/2"
9/16”19/32”
5/8”3/4"
Material: Mild steel zinc plated and clear passivated Available: With pincer (OKP175MS) / without normal closing pincer (OK175MS) Dimensions mm: 40 [H] x 270 [W] x 175 [D]
JJuunniioorrss(Nut & Bolt Clips)
Small nut and bolt clips used mainly in the motor trade for securing petrol pipes, heater hoses and small bore applications etc. Manufactured in bothzinc plated mild steel and 304 stainless steel with a standard 7mm hexagon headed screw.
Available in:- Zinc Finished Mild Steel 304 Stainless Steel
SPECIFICATIONPart No. AdjustmentNB0709NB0810NB0911NB1012NB1113NB1214NB1315NB1416NB1517NB1618NB1820
07-09mm 08-10mm09-11mm 10-12mm11-13mm12-14mm13-15mm14-16mm15-17mm16-18mm18-20mm
Jubilee Juniors are ideal for use on petrol pipes and small bore hoses.
* Stainless steel available in sizes 0709 to 1416 only.
Tightening Torque:Maximum 1.2 Nm
Screw: 7mm A/F
Material:Zinc finished mild steel304 Stainless steel*
Part No. CVK015SSCCVV CClliipp KKiittConstant Velocity Boot Clip
Assembly Instructions:-
Pre-shape clip. Determine the required clamp length.
Cut to size and remove excess material. To avoid cuts smooth rough edges.
Fit clip over application. Engage interlocking hooks in tightest available position. Firmly crimp the ear with pincers.
CLIP / PACK GUIDESize Range
(mm)Width x Thickness
(mm)Quantityin Pack
25- 5040-110
7 x 0.87 x 0.8
510
Manufactured in 304 (A2) (W4) grade stainless steel
The new CV boot kit from Jubilee contains two sizes of clip which secure the rubber bellows to the CV joint and protect it from dirt and water as well as preventing lubricants from leaking.
Easy installation by interlocking the clip hooks on the outside of the band and crimping the ear to secure. The clip must be shaped prior to assembly.
Both clip sizes have a choice of engagement positions to easily adjust to different diameters.
Essential for MOT legislation.
WWiinnggssppaaddee®®
SIZE / PACK GUIDEWorking Diameter
(mm)Size No.
WS012WS016WS020WS025WS032WS040WS050WS060WS070
9.5-1211-1613-2016-2520-3225-4032-5040-6050-70
PolybagQty.
202020202020202020
Mild steel clips with their own spade for easy hand tightening
Material SpecificationBand/Screw/Housing: Mild Steel Zinc Protected
Wingspade: Acetal PlasticColour: Blue (For colours other than blue, minimum order quantity 10000 per size)
This product range is manufactured to DIN Standard and has a plastic spade for ease of use.
Wingspades are typically used on garden hoses and domestic applications where there is a requirement for frequent tightening/loosening on low torque applications; mainly for the hardware market.
The range starts from 9.5mm and extends through to 70mm. Mild steel zinc protected clips only.
Part No. CD100
BS 5315KM06246
CClliipp DDiissppeennsseerrThe Indispensable Dispenser
304 Stainless Steel (left) & Mild Steel Zinc Protected (right)
Available in:- Mild Steel Zinc Protected (CD100MS)
304 Stainless Steel (CD100SS)
90 years of engineering excellence in one clip
The essential Jubilee Clip Dispenser not only holds individual Jubilee clips, but also the superb Jubilee Flexidriver tool (for correct adjustment of Jubilee clips).
The strong wire frame is easily re-stockable and the unit can be wall mounted or left free standing.
DISPENSER CONTENTSSize Adjustment
mm Inches Quantity000M000000X1A11X1M2A
9.5-12 11-1613-2016-2218-2522-3025-3530-4032-4535-50
3/8-1/2½-5/8½-3/45/8-7/8¾-1
7/8-11/81-13/8
11/8-15/81¼-1¾ 13/8-2
101010101010101010101
100 Jubilee worm drive hose clips + 1 Jubilee FlexidriverDimensions (mm): 340 [H] x 330 [W] x 180 [D]Total weight when full: 3.875 Kgs
Eye catching and functional, watch your stock turn significantly increase with the Jubilee CD100.
Gain the upper hand with the CD100 – easy to see, easy to sell.
Jubilee Flexidriver tool
Part No. HP100HHaannddyy PPaacckkBuy the top ten – in one hit!
Available in: Mild Steel Zinc Protected (HP100MS)
304 Stainless Steel (HP100SS)
The Handy Pack has a multitude of uses and can be used as a point of sale dispenser, stores assortment pack or mobile stock pack.
Order now and receive your outer display carton free.
Hoses demand Jubilee!
PACK CONTENTSSize Adjustment
mm Inches Quantity000M000000X1A11X1M2A
9.5-12 11-1613-2016-2218-2522-3025-3530-4032-4535-50
3/8-1/2½-5/8½-3/45/8-7/8¾-1
7/8-11/81-13/8
11/8-15/81¼-1¾ 13/8-2
10101010101010101010
100 Jubilee worm drive hose clipsDimensions mm: 270 [H] x 310 [W] x 262 [D] (85 [H] when closed)Total weight when full: 2.75 Kgs
The most popular sizes of premium brand Jubilee� hose clips individually boxed and handily packed in their own outer display carton.
100 clips in the ultimate point of sale package.
BS 5315KM06246
WWoorrkksshhoopp PPaacckkThe Ultimate Container
Hoses demand
Versatile, re-usable container with eight separate compartments holding 143 assorted Jubilee worm drive hose clips (size 9.5 to 40mm).
BS 5315KM06246
Available in:- Mild Steel Zinc
Protected (HCP143MS)
304 Stainless Steel(HCP143SS)
Premium brand Jubilee®
clips are made from the finest quality materials and are recognised for proven reliability and ultimate performance.
(Part no. HCP143)
PACK CONTENTSSize Adjustment Quantity000M00000
0X1A1
1X
9.5-12mm 11-16mm13-20mm16-22mm18-25mm22-30mm25-35mm30-40mm
243228131412137
143 Jubilee worm drive hose clipsDimensions mm: 55 [H] x 330 [W] x 250 [D]Total weight when full: 3.6 Kgs
SSmmaarrtt DDiissppeennsseerrThe Intelligent Selection
304 Stainless Steel (left) & Mild Steel Zinc Protected (right)
Increase your sales of Jubilee clips with this smart visible display Continually working to sell more Jubilee clips
Available in:- Mild steel zinc protected (SD540MS)
304 Stainless steel (SD540SS)
Keeps your stock tidy and ready for sale.
Be sure to take advantage of every opportunity to make a sale - order a Smart Dispenser now for your trade counter or for use as a stock dispenser.
This versatile and convenient dispenser from Jubilee is stylish and unique by design. It dispenses Jubilee clips in boxes of ten and singly and also carries the much prized Flexidriver tool for easy adjustment of Jubilee clips.
Part No. SD540
BS 5315KM06246
CONTENTSQuantity Size Ref. BS No. Adjustment
mm60606050504050504040402
000M000000X1A11X1M2A2
1216202225303540455055
9.5-12 11-1613-2016-2218-2522-3025-3530-4032-4535-5040-55
540 Jubilee worm drive hose clips + 2 FlexidriversTotal weight when full: 16.3 KgsDimensions (mm): 380 [H] x 580 [W] x 250 [D]
Jubilee Flexidrivers
Innovation in everyday use
JJuunniioorr AAssssoorrttmmeennttThe Essential Fastener Pack
for Small Bore Hoses
BOX CONTENTSPart No. Adjustment Quantity
070908100911101211131214
07-09mm 08-10mm09-11mm 10-12mm11-13mm12-14mm
252525303030
165 Assorted Jubilee Juniors (Nut & Bolt Clips)Dimensions (mm): 40 [H] x 270 [W] x 175 [D]Total weight when full: 1.35 Kgs
For use on petrol pipes and small bore hoses.
Available in:- Zinc Finished Mild Steel (JA165MS)
304 Stainless Steel (JA165SS)
Part No. JA165
165 assorted nut and bolt clips (size 07 to 14mm) in a multipurpose, re-usable box divided into 9 compartments.
PPoocckkeett PPaacckkNever again be caught out without that essential Jubilee clip to complete the job. This brand new compact container holds a useful selection of Jubilee clips for all those necessary hose joining applications as well as holding nut and bolt clips for joining small bore hoses and petrol pipes.
This small, plastic reusable container has 6 separate compartments and holds a selection of 16 assorted Jubilee worm drive hose clips (size 13 to 40mm) and 8 nut and bolt clips (size 7 to 13mm).
(Part no. PPAUTO)Small in Size, BBBIIIGGG in Value
Sold in packs of 10
POCKET PACK CONTENTSQty. Size Ref. Adjustment
mm InchesJubilee® Worm Drive Hose Clips:-
44422
0000X11X
13-2016-2218-2525-3530-40
1/2-3/45/8-7/83/4-11-13/811/8-15/8
Nut & Bolt Clips:-44
NB0709NB1113
7-911-13
Material Spec: Mild Steel Zinc ProtectedPart No: PPAUTODimensions [mm]: 39 [H] x 180 [W] x 150 [D]Total Weight when Full: .475 Kgs
BS 5315KM06246
POCKET PACK CONTENTSQty. Size Ref. Adjustment
mm InchesJubilee® Worm Drive Hose Clips:-
42242
00000X12
9.5-1216-2218-2525-3540-55
3/8-1/2 5/8-7/83/4-11-13/815/8-21/8
Material Spec: All 304 Stainless Steel Part No: PPSSDimensions [mm]: 39 [H] x 180 [W] x 150 [D]Total Weight when Full: .450 Kgs
POCKET PACK CONTENTSQty. Size Ref. Adjustment
mm InchesJubilee® Worm Drive Hose Clips:-
44422
0000X11X
13-2016-2218-2525-3530-40
1/2-3/45/8-7/83/4-11-13/811/8-15/8
Material Spec: Mild Steel Zinc ProtectedPart No: PPINDDimensions [mm]: 39 [H] x 180 [W] x 150 [D]Total Weight when Full: .450 Kgs
Sold in packs of 10
Sold in packs of 10
(Part no. PPSS)
ISO 9001FM00547
(Part no. PPIND)
L Robinson & Co. (Gillingham) Limited
Owens Way, Gads Hill, Gillingham, Kent, ME7 2RS, England.
Tel: +44 (0)1634 281200 Fax: +44 (0)1634 280101 Email: [email protected] Website: www.jubileeclips.co.uk
JJuubbiilleeee®® TToooollss
JJuubbiilleeee®® SSaalleess SSuuppppoorrtt
We reserve the right, without prior notice, to alter the materials used to accord with new and/or improved specifications.
Jubilee®, Jubilee Flexidriver®, Jubilee Clipdriver®, Jubilee Wingspade® & Jubilee L-R® are registered trademarks of L Robinson & Co (Gillingham) Limited.