*1 As of November 2014. Among 40mm class rotary hammers made by leading power tool manufacturers, surveyed by Hitachi Koki.*2 A comparison of the model DH40MEY and the previous model DH40MRY. The results may vary depending on operating conditions. *3 A comparison of the model DH40MEY and the previous model DH40MRY. Mean value for drilling into concrete with drill bits between 16mm and 40mm diameters. The results may vary depending on operating conditions.*4 As of November 2014. Among rotary hammers made by leading power tool manufacturers, surveyed by Hitachi Koki.　 　

High efficiency & maintenance-free Industry First

High PerformanceSpeedand

Due to AC Brushless Motor Technology

AC Brushless Motor

*4

SDS-maxShank

*3

Best in class

Up to20%Faster Drilling

Speed

*2

Best in class

40%Higher Demolition

Performance

*1 *1

Up to

Rotary Hammer DH40MEY(H1)

DH26PC(H1) 26mm SDS Plus

DH24PG(H1) 24mm SDS Plus

*1. As of November 2014. Among rotary hammers made by leading power tool manufacturers. (surveyed by Hitachi Koki.)

*2. The drill bit shown in the photo is sold separately.

360° rotatable

front handle

User Vibration Protection (UVP)

Large trigger switch

Depth gauge AC brushless motor

12 step angle adjustment

Aluminium Housing Body

(AHB)

Rotation speed selectorswitch with speed &

power indicators

SDS max chuck*2

Soft grip rubber rear handle

Mode selector

Bit shank SDS Max

Capacity Concrete - Drill Bit: 40mm Concrete - Core Bit: 105mm

Input power 1,150W No load speed 250, 330, 410 & 500 (min-1) Full load impact rate 1,430, 1,900, 2,370 & 2,850 (min-1) Joules 11j Weight 7.5kg Length 477mm Standard accessories Side handle, depth stopper, grease pack and carry case

DH28PCY(H1) 28mm SDS Plus

DH28PC(H1) 28mm SDS Plus

DH30PC2 30mm SDS Plus

DH38MS(H1) 38mm SDS Max

DH45MR 45mm SDS Max

DH50MRY 50mm SDS Max

Other Hitachi Rotary Hammers

Industry First*1 AC Brushless Motor Rotary Hammer

4 9 6 6 3 7 6 2 3 9 4 6 7

Hitachi Rotary Hammer Brushless Motor, 40mmDH40MEY

Ef�cient brushless motor offers higher drilling performance even with an extension cord.

Fastest drilling speed in its class even at voltage drops

Equipped with a built-in electronic control circuit that can adjust the impact rate according to applications. Four-step impact ratescan be selected by the rotation speed selector switch.

Hitachi’s original, spring-type dynamic vibration absorber with a weight and two springs move in the opposite direction to the vibration direction of the main body. This results in reduced vibration and improved operating ef�ciency.

Vibration-absorbing mechanism with the transatory unit and the Neidhardt spring provides high vibration-absorbing effect. This will help absorb and reduce vibrations to the user, making it more comfortable for prolonged periods of use.

Push-button, constant speed control with variable speed

Designed to be powered by petrol powered generators as well, thanks to Hitachi’s original compact and high ef�ciency inverter circuit.

Compatible with petrol powered generators

Maintenance-free

Improved handling3

64

5

1

2

7

7

2

Hitachi’s original, spring-type dynamic vibration absorber

1

Vibration-absorbing handle2

Coil SpringWeight

Vibration direction of the main body

Vibration direction of the main body

Movement of the weight Movement of the weight

Reduced vibration and improved operating efficiency

3

One push action for quick bit mounting

4

Large mode change lever5

Large trigger switch6

The internal double-insulation construction with a very sturdy aluminium die-cast body.

High efficiency

High durability

DisplayLamp

No Load Speed 250/min

Full Load Impact Rate 1,430/min

330/min

1,900/min

410/min

2,370/min

500/min

2,850/min

*1 As of November 2014. Among rotary hammers made by leading power tool manufacturers, surveyed by Hitachi Koki.*2 As of November 2014. Among 40mm class rotary hammers made by leading power tool manufacturers, surveyed by Hitachi Koki.*3 A comparison of the model DH40MEY and the previous model DH40MRY. The results may vary depending on operating conditions. *4 A comparison of the model DH40MEY and the previous model DH40MRY. Mean value for drilling into concrete with drill bits between 16mm and 40mm diameters. The results may vary depending on operating conditions.

Coil Spring

Weight

Aluminiumdie-cast

Conventional brushed motor

No more troubles with armature burnout,layer short or commutator wear.

No carbon brushreplacement

required

Significantly extended product life cycle

Industry FirstAC Brushless Motor

*2

This makes the housing more rigid, signi�cantly enhancing durability of the motor unit.

Approx. 15% lower vibration achieved by the advanced dynamic vibration absorber.

*3

*3

Approx.

15%Lower Vibration

Value

Larger mode changelever is located on thetop of the tool body foreasier operation.

Larger easy-to-griptrigger switch formore control.

A bit can be mountedby simply inserting it into the tool holder.

High PerformanceSpeed

and

Achieved by high efficiency brushless motor and optimised hammering mechanism.

Highest DemolitionPerformance and Fastest Drilling Speed in its Class

*1

Due to AC Brushless Motor Technology

Due to AC Brushless Motor Technology

*4

Best in class

Up to20%Faster Drilling

Speed

*2

*3

Best in class

40%Higher Demolition

Performance

*2

Up to

*2

*2

Ef�cient brushless motor offers higher drilling performance even with an extension cord.

Fastest drilling speed in its class even at voltage drops

Equipped with a built-in electronic control circuit that can adjust the impact rate according to applications. Four-step impact ratescan be selected by the rotation speed selector switch.

Hitachi’s original, spring-type dynamic vibration absorber with a weight and two springs move in the opposite direction to the vibration direction of the main body. This results in reduced vibration and improved operating ef�ciency.

Vibration-absorbing mechanism with the transatory unit and the Neidhardt spring provides high vibration-absorbing effect. This will help absorb and reduce vibrations to the user, making it more comfortable for prolonged periods of use.

Push-button, constant speed control with variable speed

Designed to be powered by petrol powered generators as well, thanks to Hitachi’s original compact and high ef�ciency inverter circuit.

Compatible with petrol powered generators

Maintenance-free

Improved handling3

64

5

1

2

7

7

2

Hitachi’s original, spring-type dynamic vibration absorber

1

Vibration-absorbing handle2

Coil SpringWeight

Vibration direction of the main body

Vibration direction of the main body

Movement of the weight Movement of the weight

Reduced vibration and improved operating efficiency

3

One push action for quick bit mounting

4

Large mode change lever5

Large trigger switch6

The internal double-insulation construction with a very sturdy aluminium die-cast body.

High efficiency

High durability

DisplayLamp

No Load Speed 250/min

Full Load Impact Rate 1,430/min

330/min

1,900/min

410/min

2,370/min

500/min

2,850/min

*1 As of November 2014. Among rotary hammers made by leading power tool manufacturers, surveyed by Hitachi Koki.*2 As of November 2014. Among 40mm class rotary hammers made by leading power tool manufacturers, surveyed by Hitachi Koki.*3 A comparison of the model DH40MEY and the previous model DH40MRY. The results may vary depending on operating conditions. *4 A comparison of the model DH40MEY and the previous model DH40MRY. Mean value for drilling into concrete with drill bits between 16mm and 40mm diameters. The results may vary depending on operating conditions.

Coil Spring

Weight

Aluminiumdie-cast

Conventional brushed motor

No more troubles with armature burnout,layer short or commutator wear.

No carbon brushreplacement

required

Significantly extended product life cycle

Industry FirstAC Brushless Motor

*2

This makes the housing more rigid, signi�cantly enhancing durability of the motor unit.

Approx. 15% lower vibration achieved by the advanced dynamic vibration absorber.

*3

*3

Approx.

15%Lower Vibration

Value

Larger mode changelever is located on thetop of the tool body foreasier operation.

Larger easy-to-griptrigger switch formore control.

A bit can be mountedby simply inserting it into the tool holder.

High PerformanceSpeed

and

Achieved by high efficiency brushless motor and optimised hammering mechanism.

Highest DemolitionPerformance and Fastest Drilling Speed in its Class

*1

Due to AC Brushless Motor Technology

Due to AC Brushless Motor Technology

*4

Best in class

Up to20%Faster Drilling

Speed

*2

*3

Best in class

40%Higher Demolition

Performance

*2

Up to

*2

*2

*1 As of November 2014. Among 40mm class rotary hammers made by leading power tool manufacturers, surveyed by Hitachi Koki.*2 A comparison of the model DH40MEY and the previous model DH40MRY. The results may vary depending on operating conditions. *3 A comparison of the model DH40MEY and the previous model DH40MRY. Mean value for drilling into concrete with drill bits between 16mm and 40mm diameters. The results may vary depending on operating conditions.*4 As of November 2014. Among rotary hammers made by leading power tool manufacturers, surveyed by Hitachi Koki.　 　

High efficiency & maintenance-free Industry First

High PerformanceSpeedand

Due to AC Brushless Motor Technology

AC Brushless Motor

*4

SDS-maxShank

*3

Best in class

Up to20%Faster Drilling

Speed

*2

Best in class

40%Higher Demolition

Performance

*1 *1

Up to

Rotary Hammer DH40MEY(H1)

DH26PC(H1) 26mm SDS Plus

DH24PG(H1) 24mm SDS Plus

*1. As of November 2014. Among rotary hammers made by leading power tool manufacturers. (surveyed by Hitachi Koki.)

*2. The drill bit shown in the photo is sold separately.

360° rotatable

front handle

User Vibration Protection (UVP)

Large trigger switch

Depth gauge AC brushless motor

12 step angle adjustment

Aluminium Housing Body

(AHB)

Rotation speed selectorswitch with speed &

power indicators

SDS max chuck*2

Soft grip rubber rear handle

Mode selector

Bit shank SDS Max

Capacity Concrete - Drill Bit: 40mm Concrete - Core Bit: 105mm

Input power 1,150W No load speed 250, 330, 410 & 500 (min-1) Full load impact rate 1,430, 1,900, 2,370 & 2,850 (min-1) Joules 11j Weight 7.5kg Length 477mm Standard accessories Side handle, depth stopper, grease pack and carry case

DH28PCY(H1) 28mm SDS Plus

DH28PC(H1) 28mm SDS Plus

DH30PC2 30mm SDS Plus

DH38MS(H1) 38mm SDS Max

DH45MR 45mm SDS Max

DH50MRY 50mm SDS Max

Other Hitachi Rotary Hammers

Industry First*1 AC Brushless Motor Rotary Hammer

4 9 6 6 3 7 6 2 3 9 4 6 7

Illustrations are for display purposes only. Product information and specifications should be confirmed at time of purchase. E&OE 20/04/2015

www.hitachi-powertools.com.au

Scan to see more of this product

PLEASE

R

EC Y CL E