London - Dubai - Sydney OE House, Thomas Maddison Lane, Calder Park, Wakefield, West Yorkshire, WF4 3GH Tel: +44 (0) 1924 367255 Fax: +44 (0) 1924 290652 Email: [email protected] www.oeelectrics.com brush grommet OE Electrics brush grommet April 2017 | 1 A premium brush strip grommet for installation in an industry standard 80mm desk top aperture. Moulded in high strength fire retardant polycarbonate with attractive satin silver painted top surface, the OE Brush Grommet is held securely in place by the hand tightened locking nut. The 53mm diameter high density nylon brush strip ring prevents dirt and dust ingress whilst neatly managing single or multiple power and data cables. USPs • Industry standard 80mm fit • Locking nut for secure fixing • High strength Polycarbonate • Satin silver finish • High density brush ring

brush grommet - OE Electrics...The OE Brush Grommet fits into an industry standard Ø80mm cut-out. If your surface does not already have a cut-out, we can provide a hole saw attachment

Download PDF Report

Upload
others
View
3
Download
0

Embed Size (px)

Citation preview

Page 1: brush grommet - OE Electrics...The OE Brush Grommet fits into an industry standard Ø80mm cut-out. If your surface does not already have a cut-out, we can provide a hole saw attachment

London - Dubai - Sydney

OE House, Thomas Maddison Lane, Calder Park,Wakefield, West Yorkshire, WF4 3GH

Tel: +44 (0) 1924 367255 Fax: +44 (0) 1924 290652Email: [email protected] www.oeelectrics.com

brush grommet

OE Electrics brush grommet April 2017 | 1

A premium brush strip grommet for installation in an industry standard 80mm desk top aperture.

Moulded in high strength fire retardant polycarbonate with attractive satin silver painted top surface, the OE Brush Grommet is held securely in place by the hand tightened locking nut.

The 53mm diameter high density nylon brush strip ring prevents dirt and dust ingress whilst neatly managing single or multiple power and data cables.

USPs• Industry standard 80mm fit• Locking nut for secure fixing• High strength Polycarbonate• Satin silver finish• High density brush ring

Page 2: brush grommet - OE Electrics...The OE Brush Grommet fits into an industry standard Ø80mm cut-out. If your surface does not already have a cut-out, we can provide a hole saw attachment

London - Dubai - Sydney

OE House, Thomas Maddison Lane, Calder Park,Wakefield, West Yorkshire, WF4 3GH

Tel: +44 (0) 1924 367255 Fax: +44 (0) 1924 290652Email: [email protected] www.oeelectrics.com

OE Electrics brush grommet April 2017 | 2

technicalFeaturesConfigurationØ53mm brush strip ring with Ø10mm central aperture, mounted in a polycarbonate grommet with locking nut.

ConstructionGrommet and securing nut – Fire retardant polycarbonateBrush strip ring – High density 0.15mm nylon brush strands in galvanised steel frame.

InstallationThe OE Brush Grommet fits into an industry standard Ø80mm cut-out. If your surface does not already have a cut-out, we can provide a hole saw attachment. Once in place the Brush Grommet can then be secured using the locking nut, which can then be fixed in place using screws if required.

The OE Brush Grommet is suitable for surfaces 1mm - 40mm thick.

ColoursBrush strip ring: BlackGrommet/bezel top surface: Satin Silver

CertificationsNot required

Low profile design

50mm

3.5mm

Ø79mm

Ø107.9mm

DimensionsBrush grommet with locking nut

Ø90mm

Ø53.4mm

≈ Ø12mm