Serving FieldServing Field:

Petrochemical &Renery Water Filtration

Power Generation

Water Treatment

Food and

Beverage Filtration

Municiple Drinking

Water Filtration

Produced Water Filtration

Brother Filtration has been manufacturing customized ltration consumables for decades years, we are enjoyed to helping you with your ltration difculties. Since we were beginning with two professional engineers, started from the hundreds small project, now we have involved in some big projects all over the world.

We are major manufacture for industrial water treatment, produced water ltration, petrochemical water ltration, oil & gas ltration, renery ltration. Improving your ltration performance, saving operation cost, increasing project margins are our ghting goals, building a safe and green world.

1

Filtration & Separation Filters

1. “Oil Removal Star” 1) Eco-Pleated S Series 2) Eco-Pleated G Series

“Oil Removal” type filter focus on the separating oil and water, for now also be used in injection water filtration, produced water filtration, industrial water treatment etc varies. Standard size diamention and high flow rate, making it a high cost effective filtration choice.

2) “High Flow Rate” Filter

3. “High Dirt Holding” Filter

“High Flow Rate” filter cartridge with large diameter 6’’ OD, 40inch and 60inch length, max flow rate 500 GPM. And Oring sealing on the en cap make sure system integrity and no water leaking out, and pass ow. Easy installation with your flexisting housing, no need to change.

Ultro-pleat H filter cartridge, mainly used for high solid content application, with its innovate pleated technology, increasing ten times filtration area than standard 2.5’’ OD filter, big dirt holding capacity and longer service life. Filter media in Polypropylene, Micro-fiber is available.

Brother Filtration manufactures hundres of different lter cartridges, with a range of ltration efciencies in a wariety of congurations, to meet specic industry ltration requirements. Custom products and standard type are both available,for more information, and to discuss your specic requirements, pls contact with our people. info@brotherltration.com.

2http://www.brotherfiltration

7. Polypleat Series Filter Cartridge

Polypleat type lter cartridge is a surface ltration membrane pleated lter, servicing with Polypropylene, Micro-ber membrane, Nylon 6.6, Polyethersulfone and PTFE membrane media, 99.98% absolute rating, high ltration efciency and large surface area. Special size and operation requirements is available, high pressure and temperature.

5."Diamond High Flow Bag Pletaed Filter"Diamond series bag is designed to seal inside bag housing without equipment modication. It is available with different lter media options to meet industry standards and chemical compatibility. Unique design of this pleated element provides a large effective lter surface are within the space constraints of a standard 6'' cartridge diameter while ow is maximized through the use

3

4.Max-Pleated K SeriesBrother Max-Pleated K Series 6-inch diameter pleated cartridge, with innovative technology and advanced design, enables extended ltration area, which results in signicant lter reduction, and smaller housings for high ow-rate, less lter element, cost-effective for your choice.

1) l Large diameter, high ow rate2) l Little change out lter elements3) l Small install place

Brother Backwashable lter element, are designed specically for condensate polishing applications, withhigh qual ity, long service l i fe and high ltrat ion efciency. Length available with 70inch, and 1.97inchouter diameter.

6.Condensate Water Polishing

1)Backwashable P leated F i l te r Car t r idge2) Back Wash Coated Resign String Wound Filter

http://www.brotherfiltration

10. Filter Housing

1) Cartridge Housing 2) Bag Housing 3) High Flow Filter Housing

Stainless steel lter housing, media 304 and 316 are both available, Polishing Surface Treatment, Sandblasting Treatment, ange and clamps open connection type.

4http://www.brotherfiltration

Melt Blown and String Wound lter cartridge mainly used for pre-ltration of Reverse Osmosis. String Wound lter, rolled type lter elements, manufacturing with specic blends of media designed for a range of application, industrial ltration, oil injection water treatment, produced water treatment, cooling water ltration etc. Brother depth lter provides a uniform gradient density lter media designed for long life and high particulate retention.

8. Depth Filter Cartridge

9. “Activated Carbon” Series Filter

Activated Carbon Pleated type lter, designed especially for municipal and non-chlorinated water applications. Pleat technology increasing ltration surface area, with high dirt holding and low pressure drop. They offer sediment ltration, as well as taste, odor, and chlorine taste & odor reduction in one cartridge.

12. Bag Filter

Liquid lter bag used in varies ltration industries, chemical, food and beverage, industrial water treatment, oil & gas, Petrochemical industry. Size term: #1, #2, #3, #4, PP and PE bag media for your reference.

11. “MaxFlow FRP System”

High Flow System, horizontal design, small installation place needed, high ow rate guarantee, 50T/H per lter. FRP membrane vessel, good capability of resisting chemicals and beautiful surface.

1）MaxFlow FRP System-End Connection Model2) MaxFlow FRP System-Side Connection Model

Email: info@brotherltration.com Web: www.brotherltration.com Tel: 027 8399 2898