Broschüre Walzstahl EN - Spaeter, Oberhausen · DIN 59220 / EN 10025 hot rolled, with teardrops 1,000 - 2,000 mm width x desired length for all below-mentioned strengths from coil

We work for your success

Bright Steel

Stainless Steel | Bright Bars

Strips | Coils | Blanks

Rolled Steel

Tubes

Perforated Plates

Aluminium

Piston Rods | Cylinder Tubes ROLLED STEEL

2

YOUR BASE PRODUCT – ROLLED STEEL IN MANY VARIETIES

The range of uses for our rolled steel products, bar steel and heavy plates, is exceptionally broad. We stock a wide range of bar steel and hot rolled steel sheets as well as tear drop plates and hot rolled coils. Thus, the bar steel product line includes the qualities S235JR and S355J2 also grade S235JR and CE45E galvanised. Whether it is strip-, fl at-, universal-, angle, square- or round bar steel, T-sections or U-sections as well as Cold Rolled U-Sections - we have it! In total we have more than 1,000 dimensions, which are stored in a modern bar storage system. Nevertheless, should you be in need of something, that we do not stock, we are in the position to supply you with this product, because we have been working together for many years with reputable manufacturers. In addition, we can offer you descaling, priming and bench sawing. Our hot rolled sheet range includes the grades S235JR and S355JR, as well as micro-alloyed fi ne-grained steel in grades S355MC to S700MC. We offer all grades also in pickled and oiled. In addition to the traditional warehouse formats, we can also cut the hot rolled coils to length, specifi ed by you. Furthermore we provide hot rolled steel plates with a broad range of qualities and thicknesses as drop shipments with a very short delivery time.

3

BESTSELLER – SHEETS FROM STOCK

Our thin sheets are so even and have such a close tolerance that they are especially suitable for modern canting,blanking and laser technologies. They are used in mechanical engineering, air conditioning and systems techno-logy, as well as fi lter and ventilation systems. We store EG material exclusively on nailed wooden pallets (with paper and/or fi lm packaging). If you have a bar storage sytem, we can transfer the material to your steel pallets. Whether single sheets, complete batches, small, medium, large or special formats, we will be pleased to process your order.

4

SHEETS

Stock - SheetsDimensions DC 01 greased DC 01 ungreased DX 51 galvanised DC 01 ZE elec.

galv.DX 51 alu zinc

0.75 x 1,000 x 2,000 mm • • •

0.75 x 1,250 x 2,000 mm •

0.75 x 1,250 x 2,500 mm • •

0.75 x 1,500 x 3,000 mm •

0.88 x 1,000 x 2,000 mm • •

0.88 x 1,250 x 2,000 mm •

0.88 x 1,250 x 2,500 mm •

0.88 x 1,500 x 2,000 mm •

0.88 x 1,500 x 3,000 mm •

1.00 x 1,000 x 2,000 mm • • • •

1.00 x 1,250 x 2,000 mm •

1.00 x 1,250 x 2,500 mm • • • •

1,00 x 1,500 x 2,000 mm •

1.00 x 1,500 x 3,000 mm • • • •

1.25 x 1,000 x 2,000 mm • • • •

1.25 x 1,250 x 2,500 mm • • • •

1.25 x 1,500 x 3,000 mm • • •

1.50 x 1,000 x 2,000 mm • • • • •

1.50 x 1,250 x 2,500 mm • • • • •

1.50 x 1,500 x 3,000 mm • • • •

2.00 x 1,000 x 2,000 mm • • • • •

2.00 x 1,250 x 2,500 mm • • • • •

2.00 x 1,500 x 3,000 mm • • • •

2.50 x 1,000 x 2,000 mm • • • •

2.50 x 1,250 x 2,500 mm • • •

2.50 x 1,500 x 3,000 mm • •

3.00 x 1,000 x 2,000 mm • • • •

3.00 x 1,250 x 2,500 mm • • • •

3.00 x 1,500 x 3,000 mm • • • •

4.00 x 1,000 x 2,000 mm •

4.00 x 1,250 x 2,500 mm •

4.00 x 1,500 x 3,000 mm •

5

MATERIAL QUALITIES | FORMATS

Material qualitiesProduct group Thickness Steel standard

Cold-rolled non-coated steelsDC 01

0.75 - 2.99 mm EN 10130

Hot-dip galvanised steelsDX 51 D + Z

0.75 - 4.00 mm EN 10327

Electrolytically galvanised steelsDC 01 ZE

0.75 - 2.99 mm EN 10152

Aluzink steelDX 51 D + AZ

1.50 - 2.00 mm EN 10215

Formats1,000 x 2,000 Small format

1,250 x 2,500 Medium format

1,500 x 3,000 Large format

Fixed sizes on demand

6

SHEETS | STRIPS

As we are continuously expanding our range, you are welcome to enquire about non-listed dimensions.

Due to our excellent contacts to the mills we can offer you a broad range of heavy plates in different thicknesses and qualities within short delivery times via third-party business. We can also offer you different formats from 15 – 100 mm from stock.

Sheets – grade DD 11

EN 10111 / 10051

hot rolled, pickled and oiled, laser cut qualitymm 1.50 2.00 2.50 2.99

1,000 x 2,000 • • • •

1,250 x 2,500 • • • •

1,500 x 3,000 • • • •

1,000 - 1,500 mm width x desired length for all above-mentioned strengths from coil stock.

Strips – grade S235JR / DD 11

EN 10025 / 10111 / 10051

hot rolled, pickled and oiled, laser cut qualitymm 4 5 6 8 10 12

1,000 x 2,000 • • • • • •

1,250 x 2,500 • • • • • •

1,500 x 3,000 • • • • • •

1,000 - 1,500 mm width x desired length for all above-mentioned strengths from coil stock.

Strips – grade S235JR / S355JREN 10051 / 10025

hot rolled, laser cut qualitymm 3 4 5 6 8 10 12 15 20

1,000 x 2,000 • • • • • • • • •

1,250 x 2,500 • • • • • • • • •

1,500 x 3,000 • • • • • • • • •

2,000 x 3,000 • • • • • • • • •

2,000 x 4,000 • • • • • • • • •

2,000 x 6,000 • • • • • • • • •

1,000 - 2,000 mm width x desired length for all above-mentioned strengths from coil stock.All dimensions can be offered in pickled and greased.

7

STRIPS | SHEETS

Strips – grade S355MC / S600MCEN 10149 / 10051

hot rolled, laser cut quality1,000 - 2,000 mm width x desired length for all below-mentioned strengths from coil stock,

mm 3 4 5 6 8 10 12 15 20

1,000 x 2,000 • • • • • • • • •

1,250 x 2,500 • • • • • • • • •

1,500 x 3,000 • • • • • • • • •

2,000 x 4,000 • • • • • • • • •

2,000 x 6,000 • • • • • • • • •

All dimensions can be offered in pickled and greased,

Sheets – grade S235 JRDIN 59220 / EN 10025

hot rolled, with teardrops1,000 - 2,000 mm width x desired length for all below-mentioned strengths from coil stock,

mm 3 4 5 6 8 10 12 15

1,000 x 2,000 • • • • • • • •

1,250 x 2,500 • • • • • • • •

1,500 x 3,000 • • • • • • • •

2,000 x 6,000 • • • • • • • •

Strips – grade S700MC

EN 10149 / 10051

hot rolled, laser cut qualitymm 3 4 5 6 8 10 12

1,250 x 2,500 • • • • • •

1,500 x 3,000 • • • • • •

All dimensions can be offered in pickled and greased,

8

STEEL BARS | FLAT BARS

Flat bars – app. 6 m production lengthgrade S235JR black

mm 5 6 8 10 12 15 20 25 30 40 50

15 • • •

16 • •

20 • • • • • •

25 • • • • • •

30 • • • • • • •

35 • • • • • • • •

40 • • • • • • • • •

45 • • • • • •

50 • • • • • • • • •

60 • • • • • • • • • •

70 • • • • • • • • • • •

75 • • • • • • • •

80 • • • • • • • • • • •

90 • • • • • • • • • • •

100 • • • • • • • • • •

110 • • • • •

120 • • • • • • •

130 • • • • •

140 • • • • • • •

150 • • • • • • • • •

Steel barsGrades

S235 JR black EN 10025

S235 JR galvanised EN 10025

S355J2 EN 10025

C45E EN 10083-2

Product groups

Flat bars EN 10058

Universal fl ats DIN 59200

Flat bars EN 10058

Round bars EN 10060

T-bars EN 10055

Square bars EN 10059

Angle bars EN 10056

Channels EN 10279

Cold Rolled Steel Sections in bars EN 10162

As we are continuously expanding our range, you are welcome to enquire about non-listed dimensions.

9

UNIVERSAL FLATS | FLAT BARS | ROUND BARS

Universal fl ats – app. 6 m production lengthgrade S235JR black

mm 5 6 8 10 12 15 20 25 30

160 • • • • • • • • •

170 • •

180 • • • • • • • • •

190 • •

200 • • • • • • • • •

220 • • • • • • •

240 • • • • • • •

250 • • • • • • •

260 • • • •

280 • • • •

300 • • • • • • •

350 • • •

400 • • • • • •

Flat bars – app. 6 m production lengthgrade S235JR black

mm 3 4 5 6

15 • •

16 •

20 • •

25 • •

30 • •

35 • •

40 • •

50 • •

60 • •

70 • •

80 • •

110 • •

120 • •

130 • •

140 • •

150 • •

Round bars 6 - 25 mm – app. 6 m production lengthgrade S235JR black

6 8 10 12 14 15 16 18 19 20 22 24 25

• • • • • • ▲ • • ▲ • ▲ •

▲= also 8 m production length

Round bars 26 - 100 mm – app. 6 m production lengthgrade S235JR black

26 27 28 30 35 36 40 42 50 60 70 80 90 100

• • • ▲ • • • • • • • • • •

▲= also 8 m production length

10

CHANNELS | COLD ROLLED U-SECTIONS | T-BARS | ANGLES

Channels – app. 6 m production lengthgrade S235JR black

30 40 40/20 50 50/25 60 65 80 100 120 140

• • • • • • • • • • •

T-Bars – app. 6 m production lengthgrade S235JR black

20 25 30 35 40 45 50 60 70 80 90 100 120 140

• • • • • • • • • ■ ■ ■ ■ ■

• = app. 6 m production length ■ = also 12 m production length

Angles (continued on following page)grade S235JR black

mm 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 24

20 x 20 • •

25 x 25 • • •

30 x 20 • •

30 x 30 • • •

35 x 35 • • •

40 x 20 • •

40 x 40 • ■ • •

45 x 430 • •

45 x 45 • •

50 x 30 ■

50 x 40 •

50 x 50 • ■ • • • •

60 x 30 • •

60 x 40 • • •

60 x 60 • ■ ■ •

65 x 50 ■ •

65 x 65 •

70 x 70 ■ ■

75 x 50 • • •

75 x 55 • •

75 x 75 •

80 x 40 ■ ■

80 x 65 ■ ■ ■

80 x 80 ■ ■ •

90 x 60 ■ ■

90 x 90 ■ ■

100 x 50 ■ ■ ■

100 x 65 ■ ■ ■

100 x 75 ■ ■ ■

100 x 100 ■ ■ ■ ■

110 x 110 ■ ■


Cold Rolled U-Sections- app. 6 m production lengthgrade S235JR EN 10025/10162

mm

3 40 x 20 40 x 40 46 x 45

4 40 x 35 50 x 40 54 x 45 62 x 45 70 x 50 80 x 50 100 x 50

5 80 x 50 100 x 50

6 120 x 60 140 x 60 160 x 65 200 x 80

11

ANGLES | SQUARE- | FLAT- | ROUND- | T-BARS

Angles (continuation)grade S235JR black

mm 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 24

120 x 80 ■ ■ ■

120 x 120 ■ ■ ■ ■

130 x 65 ■ ■

130 x 130 ■ ■

140 x 140 ■

150 x 75 ■ ■

150 x 90 ■ ■

150 x 100 ■ ■ ■

150 x 150 ■ ■ ■

160 x 80 ■ ■

160 x 160 ■ ■

180 x 90 ■ ■

180 x 180 ■ ■

200 x 100 ■ ■ ■ ■

200 x 200 ■ ■ ■ ■

250 x 90 ■ ■ ■ ■


Square bars – app. 6 m production lengthgrade S235JR black

6 8 10 12 13 14 15 16 18 20 25 30 35 40 50 60 80 100

• • • • • • • • • • • • • • • • • •

Flat bars – app. 6 m production lengthgrade S235JR galvanised

mm 5 6 8 10

20 •

25 •

30 • • • •

35 •

40 • • • •

50 • • • •

60 • • • •

70 • • •

80 • • •

100 • • • •

120 •

150 •

Round bars – app. 6 m production lengthgrade S235JR galvanised

pp ppp p

8 10 12 14 16 18 20

• • • • • • •

T-Bars – app. 6 m production lengthgrade S235JR galvanised

25 30 35 40 45 50 60

• • • • • • •

12

CHANNELS | ANGLES

Channels – app. 6 m production lengthgrade S235JR galvanised

40 40/20 50 50/25 60 65

• • • • • •

Channels – app. 12 m production lengthgrade S235JR galvanised

80 100 120 140 160

■ ■ ■ ■ ■

Anglesgrade S235JR galvanised

mm 3 4 5 6 7 8 9 10 11

20 x 20 •

25 x 25 •

30 x 30 • •

35 x 35 •

40 x 20 • •

40 x 40 • •

45 x 30 •

45 x 45 •

50 x 30 •

50 x 50 ■

60 x 30 •

60 x 40 •

60 x 60 ■

70 x 70 ■

75 x 50 •

80 x 40 ■

80 x 65 ■

80 x 80 ■

90 x 60 ■ ■

90 x 90 ■

100 x 50 ■ ■

100 x 65 ■

100 x 75 ■ ■

100 x 100 ■ ■

120 x 80 ■ ■

120 x 120 ■

130 x 65 ■

150 x 100 ■

160 x 80 ■

180 x 90 ■

200 x 100 ■


13

FLAT BARS | UNIVERSAL FLATS

Flat bars | Universal fl atsgrade S355J2

mm 5 6 8 10 12 15 20 25 30 35 40 50 60

20 • • • •

25 • • • •

30 • • • • • • •

40 • • • • • • • • •

50 • • • • • • • •■ ■

60 • • • • • • • • •■

•

70 • • • • • • • •■

•

75 • • •

80 • • • • • • • • • •

90 • • • • • •

100 • • • • • • • • • • • •

110 • • • • • • • • •

120 • • • • • • • • • •

130 • • • • • •

140 • • • • • • • • •

150 • • • • • • • • • •

160 • • • • • •

180 • • • • • • • • •

200 • • • • • • • • •

220 • • • • • • •

240 • • • • • •

250 • • • • • •

300 • • • • • •

350 • • • • • •

400 • • • • • •

500 • • • • • •


Flat barsgrade C45E

mm 8 10 12 15 20 25 30 40 50

50 • • • • •

60 • • • •

70 • • • • • •

80 • • • • • • • •

90 • • • • • • • •

100 • • • • • • • •

14

ROUND BARS | SQUARE BARS | T-STEEL | ANGLES

Round bars – app. 6 m production lengthgrade S355J212 16 20 24 25 27 28 30 32 40 45 50 60 65 70 80 100 110 120 130

• • • • • • • • • • • • • • • • • • • •

Square bars – app. 6 m production lengthgrade S355J2

30 40 50 60 70 80 100 120 150

• • ■ ■ ■ • ■ • •

■ = also 12 m production length

T-Steel – app. 12 m production lengthgrade S355J2

80 100 120 140

■ ■ ■ ■

Angles – app. 12 m production lengthgrade S355J2

mm 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 22 24 28

50 x 50 ■

60 x 40 ■ ■

60 x 60 ■ ■ ■

70 x 70 ■ ■

75 x 50 ■

80 x 40 ■ ■

80 x 80 ■ ■

90 x 60 ■ ■

90 x 90 ■ ■

100 x 50 ■ ■ ■

100 x 65 ■

100 x 75 ■

100 x 100 ■ ■ ■

110 x 110 ■ ■

120 x 80 ■ ■ ■

120 x 120 ■ ■ ■

130 x 65 ■ ■

130 x 130 ■

140 x 140 ■

150 x 75 ■ ■

150 x 90 ■ ■

150 x 100 ■ ■ ■

150 x 150 ■ ■ ■

160 x 80 ■ ■

160 x 160 ■ ■

180 x 90 ■ ■

180 x 180 ■ ■ ■

200 x 100 ■ ■ ■ ■

200 x 200 ■ ■ ■ ■ ■

250 x 90 ■ ■ ■

250 x 250 ■ ■ ■ ■

15

NOTES

Jan MarquardtTel + 49 202 562-268

Fax + 49 202 562-444268

Olga TimermaneTel + 49 202 562-102

Fax + 49 202 562-444102

Verkauf StabstahlHarald BloemenTel + 49 202 562-176

Fax + 49 202 562-444176

Simone EmmelTel + 49 202 562-225

Fax + 49 202 562-444225

Miroslav Michalski (Hbv)Tel + 49 202 562-224

Fax + 49 202 562-444224

Svenja SchönenbergTel + 49 202 562-170

Fax + 49 202 562-444170

E-Mail: 1. Buchstabe [email protected]:[email protected]ä=ae, ü=ue, ö=oe, ß=ss

Jochen KaiserTel + 49 202 562-175

Fax + 49 202 562-444175

Rainer Schmitt (Prokurist)Tel + 49 202 562-228Fax + 49 202 562-444228

Verkauf BlecheHarald BloemenTel + 49 202 562-176Fax + 49 202 562-444176

Katrin BöckmannTel + 49 202 562-268Fax + 49 202 562-444268

Marcel DreisbachTel + 49 202 562-227Fax + 49 202 562-444227

Bernhard KretschmannTel + 49 202 562-281Fax + 49 202 562-444281

Konrad KusberTel + 49 202 562-112Fax + 49 202 562-444112

Heike LademacherTel + 49 202 562-208Fax + 49 202 562-444208

Johanna LasokTel + 49 202 562-229Fax + 49 202 562-444229

Melina PalumboTel + 49 202 562-172Fax + 49 202 562-444172

Olga TimermaneTel + 49 202 562-102Fax + 49 202 562-444102

Verkauf StabstahlJochen KaiserTel + 49 202 562-175Fax + 49 202 562-444175

Janine KötherTel + 49 202 562173Fax + 49 202 562444173

Miroslaw Michalski (Hbv)Tel + 49 202 562-224Fax + 49 202 562-444224

Tanja MickelsTel + 49 202 562-170Fax + 49 202 562-444170

Nadine StarkTel + 49 202 562-135Fax + 49 202 562-444135

Verkauf Walzstahl StreckeStephan Doert (Hbv)Tel + 49 202 562-230Fax + 49 202 562-444230

Simone EmmelTel + 49 202 562-225Fax + 49 202 562-444225

E-Mail: 1.Buchstabe [email protected]:[email protected]ä=ae, ü=ue, ö=oe, ß=ss

Rainer Schmitt (Prokurist)Tel + 49 202 562-228Fax + 49 202 562-444228

Verkauf BlecheStephan Doert (Hbv)Tel + 49 202 562-230Fax + 49 202 562-444230

Bernhard KretschmannTel + 49 202 562-281Fax + 49 202 562-444281

Konrad KusberTel + 49 202 562-112Fax + 49 202 562-444112

Heike LademacherTel + 49 202 562-208Fax + 49 202 562-444208

Jan MarquardtTel + 49 202 562-268Fax + 49 202 562-444268

Olga TimermaneTel + 49 202 562-102Fax + 49 202 562-444102

Verkauf StabstahlHarald BloemenTel + 49 202 562-176Fax + 49 202 562-444176

Simone EmmelTel + 49 202 562-225Fax + 49 202 562-444225

Miroslav Michalski (Hbv)Tel + 49 202 562-224Fax + 49 202 562-444224

Svenja SchönenbergTel + 49 202 562-170Fax + 49 202 562-444170

E-Mail: 1. Buchstabe [email protected]:[email protected]ä=ae, ü=ue, ö=oe, ß=ss

Jochen KaiserTel + 49 202 562-175Fax + 49 202 562-444175

DIN EN ISO 9001:2008 CERT.NO 171616CC1-2015-AQ-GER-DAKKS-DNV-GL

We are quality assured and have been certifi ed

in wholesaling, including storage and processing,

since 1993.

Peter Holzrichter GmbH

Schönebecker Platz 11

42283 WuppertalTel +49 202 562-0

Fax +49 202 562-278

[email protected]

Supply and dispatch warehouse

Schwerte

Im Heiligen Feld 958239 Schwerte-GeiseckeTel +49 2304 9667-0

Fax +49 2304 9667-136

Bright Steel

Stainless Steel | Bright Bars

Strips | Coils | Blanks

Rolled Steel

Tubes

Perforated Plates

Aluminium

Piston Rods | Cylinder Tubes

Stephan Doert (Assistant Manager)Tel +49 202 562 - 230

Fax +49 202 562 - 444230

Simone HölterTel +49 202 562 - 225

Fax +49 202 562 - 444225

Jennifer KnuthTel +49 202 562 - 173

Fax +49 202 562 - 444173

Bernhard KretschmannTel +49 202 562 - 281

Fax +49 202 562 - 444281

Bettina KrigsTel +49 202 562 - 135

Fax +49 202 562 - 444135

Konrad KusberTel +49 202 562 - 112

Fax +49 202 562 - 444112

Heike LademacherTel +49 202 562 - 208

Fax +49 202 562 - 444208

Miroslaw Michalski (Assistant Manager)Tel +49 202 562 - 224

Fax +49 202 562 - 444224

Olga TimermaneTel +49 202 562 - 102

Fax +49 202 562 - 444102

Dajana WoitzikTel +49 202 562 - 129

Fax +49 202 562 - 444129

E-Mail: 1. Letter First [email protected]:[email protected]ä=ae ü=ue ö=oe ß=ss

Documents

Broschüre Walzstahl EN - Spaeter, Oberhausen · DIN 59220 / EN 10025 hot rolled, with teardrops 1,000 - 2,000 mm width x desired length for all below-mentioned strengths from coil