Brochure Mitra Morakarya Tehnik, Pt

Industrial Automation System ServiceSpecial Purpose Automation MachineConveyor SystemTolls and MachiningElectrical and Mechanical Supplier

Efficient and Robust Automation Solusitions

INTRODUCTION

IPC = Industrial Personal ComputerPLC = Programmable Logic Controller

Office Network(Mainly Ethernet based)

These says, it's hard to image the production landscape without industrial automation systems. Growing requirements of high product quality, paired with expectations of equally high -volume production, mean that the scale of industrial automation will continue to grow. Much of what previously produced by human hand can no longer be achieved in terns of cost and quality. Energy efficiency, mobility and security arethe main challenges facing modern society. Mitra Morakarya Tehnik, PT industrial automation product address all of these needs. Providing outstanding reliability and rebustness, exellent quality and leading-edge innovations. Rich Funtionality and extensive integration capabilities ensure easy design-in and fast time-to-market, The Industral automation application is presented in the following level: The automation level illustrates the three main levels as wll as the intercommunication between them.

Supervisor Level(e.g.,IPC)

Control Level(e.g.,PLC)

Factory Network(Field Bus Based)

Field Level (e.g.,Peripheral Module)

Sensor, Actuator Interface

Scope of BusinessIndustrial Automation Unit

INSERTING PRESSING PIN MACHINE

PT MITRA MORAKARYA TEHNIK

This machine is the improvement on the speed and the precision that applicable in the production of compressor crankcase that used for Motor Car Air Conditioning , The advatage of this machine on such below features:

* The production capacity will increase five time compare with manualssystem. This is a result combining two process such as pin inserting and crankcase pressing process

* The precision level on the dimension can achieve 0.02 mm tolerance.* This macine warranty the quality by using part or component of japan and

europe made.* The machine is automation control base system with type CJ1M* The machine is featured with safety system for both human safety and

pressure safety.

This machine is applicable for sealing process on crankcase automatically with some beneficial such as:* The machine already using combination of both servo driver and SMC

system.* The precisan of sealant positioning can achieve 0,1 mm tolerance.* Sealant volume can control by using nozzle with diameter size 1 mm.* This machine is using PLC control type CJ1M-CPU22.* Good quality of mechanical and cashing taht using corm plating,

aluminium profile, "Misumi" parts, and support by surface treatment precision of 0,02mm tolerance.The machine is using Acrylic transparant cover with 5mm thickness.

This machine is using for making marking on the crankcase automatically with below specifications :* This machine system using PLC control type CPM2C-20CDT.* The marking capacity can achieve 0,2mm.* The machine id completed with human safety and preasure safety.* Good quality of mechanical and chasing taht using corm plating,

alumionium profile, "Misumi' parts, and support by surface traetment precision of 0,02mm tolerance.

* Cover unit using acrylic transparant 5mm.* This machine is using Acrylic transparant cover 5mm thickness.

Head Office:Ruko Sentra Niaga Sequare F-28 Graha Asri

Cikarang-Bekasi 17836; Tel : 021-89142788, 021-98131447,fax 021-89142788

SEALENT CRANKCASE MACHINE

MARKING CRANKCASE MACHINE


AUTO SOLDERING MACHINE


"Mitra Morakarya Tehnik" auto soldering machine is the combination of automation technology and mechanical and electrical system with some beneficial features as :* The moving part using motor servo as driver with pointing precisian can achieve 0,0002mm and using PLC control program type C1JM-CPU23.*The relay production capacity can achieve 20 pcs take in-out.* Can detect the soldering quality as on setting standard.* Featured with weekly timer for it is heater machine.* Featured with human safety device and pressure safety.* Featured with touch screen display control of type NT21, brand of Omron,

or equivalent.* Good quality of electrical parts which produced by Japan and Europe

standard.The mechanical parts and chasing using material of stainless steel 400 that has survace treatment with 0,02mm precision.

This machine is using for twisting the yarn for making hair of " Barbie Doll"manually that complete with some features such as :* Temperature sensor that using for detecting the temperature during

twisting process by application of some save hold relay or relay scanner.* Good quality of mechanical and cashing that using corm plating,

almuminium profile, "Misumi" parts, and support by surface teratment precision of 0,02 tolerance.

* The machine is using Acrylic transparant cover with 5mm thickness.

This machine is using for checking the precision of Relay-leg size automatically that support by component such as :* Proximity sensors that function for detect the Relay-leg and support by

PLC control type CJ1M-CPU11.* The machine can automatically split the good output and no good output

for the amount 4 pcs at the same time.* The production speed can achieve 2 pcs per second.* The precision level can achieve 0,1mm tolerance.* This machine using good quality for casing and other mechanical

component taht using corm plating and powder coating.



CURLING MACHINE

AUTO FLICKER MACHINE



This machine is function for detecting relay contact (continuity) manually with good precision and this machine is complete with flicker speed quality adjustment with below specifications:* This machine is using control type CPM1A-30CDT.* The machine complete with pressure safety sensor.* Good quality of mechanical and casing that using corm plating, aluminium

profile, "Misumi" parts, and support by surface teratment precision of 0,02mm tolerance.

* Cover unit using Acrylic transparant 5mm.The machine is using Acrylic transparant cover with 5mm thickness.



MANUAL COUNTIUNITY MACHINE

Tools & MachinigEquipment Supporting




Manual Milling Surface Milling & Lathe Miling

CNC Lathe Manual Lathe

Hand Cutting Hand Drilling

CNC Lathe

CNC Center

Grinding Machine

Labeling Cable Welding Machine Cutting Wheel

Documents

Brochure Mitra Morakarya Tehnik, Pt