8/13/2019 Brochure ECED
1/2
WHO CAN ATTEND
Undergraduate students ofEngineering Colleges from thestream of
Electrical, Electronics &Communication
Engineering,Instrumentation and Control
Engineering, and ComputerEngineering
MODE OF PAYMENT
All remittances must be in the form ofD.D. payable at Patiala
drawn infavour of HECED.
(Candidates shall be selected by theDepartmental selection
committee)
Please mail the duly filled registrationform to:
Dr. Alpana AgarwalCoordinatorShort Term Training
ProgrammeESD-2013,
Electronics & CommunicationEngineering Department,
THAPAR UNIVERSITYPATIALA 147004,
PUNJABE-mail:[email protected]
[email protected],[email protected]
ABOUT THE UNIVERSITY
Thapar University, formerly, ThaparInstitute of Engineering
andTechnology (Deemed University) isone of the pioneer technical
institutesof our country. It was founded in 1956
and is currently imparting UG, PGand Doctoral programmes in all
majordisciplines of engineering,technology, management andsciences.
It is known for its highlyspirited, dedicated and
distinguishedhuman resource personnel & for itsquality.
For further details contact
Dr. Alpana Agarwal, AssociateProfessor, ECEDMs. Harpreet Vohra,
AssistantProfessor, ECEDMr. Rishikesh Pandey, AssistantProfessor,
ECED
Department of Electronics &Communication Engineering
THAPAR UNIVERSITY PATIALA -147001 PUNJABPh.: (0175): 2393083
(O)Fax: (0175): 2393005, 2364498E-mail:[email protected]
[email protected],[email protected]
Details about the programme areavailable on website:
www.thapar.edu
FOUR WEEKSSHORT TERM TRAINING
PROGRAMMEON
ELECTRONIC SYSTEM DESIGN(June 3 July 2, 2013)
ChairmanDr. Rajesh Khanna
Course CoordinatorDr. Alpana Agarwal
Course Co-Coordinator
Ms. Harpreet VohraMr. Rishikesh Pandey
Organized by
DEPARTMENT OF ELECTRONICSAND COMMUNICATION
ENGINEERINGTHAPAR UNIVERSITY
PATIALA147004(PUNJAB)
8/13/2019 Brochure ECED
2/2
INTRODUCTION
Modern electronic systems are noweverywhere such as,
cellphoneslaptops, biomedical applications,planes, etc. There will
be a continuingneed to design and build such
systems in an efficient way. Theobjective of this training is to
developthe ability in the students to analyzeand design electronic
circuits bothanalog and digital that can be scaledup further in
application space.Emphasis will be given to develop acomprehensive
understanding ofmost of the basic electronic circuitscomponents
followed by hardware
emulation of the various systemsdesign. The students will
alsodevelop an understanding of theexisting capabilities and
limitations ofvarious steps in overall designmethodologies.
COURSE FEES
Fee: Rs. 7500/- for each participantand Boarding & lodging
arrangementhas to be made by studentsthemselves. However hostel
facilitycan be provided to students on as peractual payment
basis.
COURSE CONTENTS
1. Practical applications ofdifferent analog devices
(BJT,MOSFETs, and OPAMPs).
2. Selection and implementationof components according to
circuit applications.3. Designing of BJT/MOSFET
based circuits.4. Introduction to OPAMP and its
practical implementation5. Designing of OPAMP based
instrumentation amplifiers,comparators etc.
6. Hardware descriptionlanguages: VHDL, VERILOG.
7. Architectural features of FPGAand CPLD.
8. Working with mentor graphics/Xilinx HDL design platform.
9. Designing of combinatorial andsequential digital circuits
TIMINGS OF THE COURSE
The timings of the course is:9.00 A.M to 2.00P.M
A Four Weeks Short Term TrainingProgramme
on ELECTRONIC SYSTEM DESIGN
(June 3 July 2, 2013)
REGISTRATION FORM
Name_______________________(Attach a recent passport size
photogr aph)
Father s Name________________
Hostel Required: Yes/No
Address_____________________
E mail:______________________
(Mob.)
DD No._______ Dt. __________ forRs. ________ drawn on
(bank)______________________________
Place: Date:
Signature of the applicant
No objection certif icateI have no objection in case thestudent
is selected for this trainingprogramme. He will abide by therules
and regulations of the university
(Seal) (Signature of HOD)(Xerox copies of this form can
beused)
