Broadcasting Multi-Format BC=CQCGCFC

7” 8.4” 9” 17” 20” 23’’ / 24” 32” 40’’ / 46” 55”

B O N

55”

Broadcasting Multi-Format

LCD MONITORS

Selectable Color Spaces(EBU, NTSC, SMPTE-C, BT709, D-Cinema, Native, User)

Selectable color spaces of EBU, NTSC,SMPTE-C, BT709, D-Cinema, Native, Userwith BON auto Calibration Software.BDM-241L3G and BXM-230N3G Model hasenabled the widest color space of 3D-LUTcapability ever offered in a BON monitor tofully cover broadcast-standard color spaces.

Selecatable Gamma mode G1.0 up to 3.0 by users.BDM-241L3G and BXM-230N3G model is built with 10bit processing and supports fast response time with accurate color reproduction and quality picture consistency that meets HD & SD monitoring application.

10 Bit LCD Panel and 12bit ProcessingBXM-230N3G model is built with 10bit PANEL and 12 bit processing and supports fast response time with accurate color reproduction and quality picture consistency that meets HD & SD monitoring application.

3G Signal Input, Uniformity CorrectionBDM-241L3G and BXM-230N3G Model is Support 3 Gbps with 1080 50/60p signal input capability.

ICAC (Intelligent Connection for Alignment & Calibration)BON ICAC tools allow a perfect color alignment to our new and advanced monitors.Our ICAC is compatible with two different colorprobes;

1 Konica Minolta CA-2101 Kevin K-10 Probe

Target Gamma : 1.2 Target Gamma : 2.2 Target Gamma :2.5

Nomal Field Monitor

Auto color Calibration Software(SMPTE-C, ITU-R BT 709standard color temperature,Gamma, Luminace Level precision adjustment)

Good Readability under Sunlight

For making BON Monitors suitable forprofessional broadcasting applications,compensation is conducted for BON

Monitor series in 256(8bit) or 1024(10bit) discrete RGB step, rated gamma properties are reproduced, and gradation suitable for broadcasting is achieved.

Minimized surface reflectionQuick Daylight Button to fit outdoor

EBU Color SpaceFor outstanding picture performance, BONproducts provide accurate colors in accordancewith SMPTE and EBU global standard.BON LCD display are factory calibratedclosely to REC 709 specifications and remain incolor alignment considerable longer than CRTdisplay that end to "drift" and changecolourimetry noticeably over time.The digital technology of BLM give more constant and reliable colourimetry.

Friendly Audio Level MeterNew Audio Level Bar will be displayed with natural color gradation along with detailed scale. Also this new audio level bar added audio DB Value, Peak Hold function, each channel digit into its configuration so that user can easily read the audio level value.

02 03

dB246810121416

-70-60-50-40-30-20-100

Dual Display and Split Screen (PAP & PIP) with Freezing modeDual Display (PIP and PaP) function enable twoinput signals to be displayed with Freezing modeside by side which is very useful for camera andmonitoring operation.

You can adjust brightness and transparency both in waveform and Vector.Waveform and Vector Scope Display

Waveform/Vector same time display Input video is displayed with waveformand vector scope at the same time.

Closed Caption Function covering various encoders(CEA 608, CEA 708/Compatible with HDE-3000, Evertz HD9084,Evertz 8084AD)This function is available in composite, YPbPr and Digital

Display V-Chip DataThis function is intended to manage all children's television watching. The V-chip systematically works much like closed captioning as it uses the vertical blanking interval in the television signal to send and receive a special code in the programming that indicated the Show's score according to a simple numerical rating system for violence, sex, and language.

H/V FLIP ModeThis flip function is perfect for use in the studiofield and allows negative image, test cueing,script looping and so on. When reporters havewebcas, video podcast, news report andcorporate video, the flip mode can help a correctword content to reporters.

(HD/SD-SDI) signal. There are three selectable mode:Off, CC708, CC608 (Transcoded, VANC, Line21). This function displays character information included in CC signal on the screen.

The rated program's signals are encoded according to the rating, on line 21 of the broadcast signal's vertical blanking interval of using the XDS protocol, and this is detected on the television screen with V-chip. If the program's rating is outside the level configured as acceptable on any television, the program is blocked or shown with the data.

Video Range Check Fuction

Operator can select and limit the desirable Luminance or chrominance area from video signal using Y/C Video Level check function. If the luminance or chrominance is over or under than selected level, then, operator can easily notice and control the Camera Input signal into the desirable range.

Focus Assist Fuction

This is the function which displays input signal’s Focus Edge. This function is very useful for operators to control desirable camera video input, watching its focus.

Dual Channel Display

75% Scale 100% Scale Selectable between Y,Cb,Cr

Front

Rear

Front

Model Series BLMCost Effective

Model View Features

084

Specifications

04 05

Front

Rear

Model Series BLMCost Effective

Model View Features

Specifications

Front

Rear

Specifications

Model Series BPMField Monitor

Model View Features

06 07

Model Series BPMField Monitor

Model View Features

Specifications

090090MS

Front

Rear

Front

Model Series BPMVarious Function

Model View Features

Specifications

Front

Rear

Front

08 09

Model Series BPMVarious Function

Model View Features

Specifications

321LS400SS460SS

Front

Rear

Model Series BDM10 Bit Processing

Model View Features

Specifications

240LS

Front

Rear

10 11

Model Series BDMDual Link Supports

Model View Features

Specifications

170LD240LD

Rear

Front

Model SeriesBDMReal Time Color Gamut (3D LUT), 3G, Dual Link

Model View Features

Specifications

12 13

Front

Rear

Model Series BXMGrade 1 Monitor

Model View Features

Specifications

230N3G

Front

Rear

View

Front

R

Model SeriesBXM12 bit processing and various function

Model View Features

Specifications

Front

Rear

14 15

170LS

240LS

Model SeriesBQMBuilt in Quad Monitor

Model View Features

Specifications

Front

Rear

Model Series BTM Wall Monitor

Model View Features

Specifications

170LS240LS

Front

Rear

View

Front

16 17

Front

Rear

Model Series STM DVI/HDMI/Component Input

Model View Features

Specifications

400S

460S

550L

Model Series BPMOutdoorField Monitor

Model View Features

Specifications

090S

Front

Rear

18 19

Power code, CDManual, DVI to VGAGender

Power code, CDManual, Stand MountDVI to VGA Gender

Power code, CDManual Stand MountDVI to VGA Gender









Power code, CDManual, Stand Mount


Rack Mount, Tripod Head, V-Mount / Anton bauer / DV-batteryHood, Carrying Case

Rack Mount, Wall Mount, V-Mount / Anton bauer / DV-batteryHood, Carrying Case



Rack Mount, Tripod HeadSunvisor, Hood, Carrying Case

Rack Mount, Wall MountCarrying Case



Wall Mount, Stand MountCarrying Case





084

170

240

071

090

170

200

240

321

400

460

550

170

240

Accessories

BDM

BPM

BLM






Power code, CDManual, Stand Mount

Power code, CDManual












BXM

BQM

BTM

STM

170

240

230N3G

170

240

170

240

400

460

550

Accessories

20 21

Dimension Drawing

084

170

240

071

BLM

BPM

22 23

Dimension Drawing

090

170

200

240

BPM

Dimension Drawing

321

400

460

170

BPM

BDM

Dimension Drawing

24 25

BDM 240

230N3G

170BXM

240

Dimension Drawing

170

240

170

240

BQM

BTM

Dimension Drawing

26 27

STM

400

460

550

B O N

Tresbelle-Sky B/D 2F, 1479 Gayang2-Dong, Gangseo-Gu, Seoul, KoreaTel : 82 2 2659 0333 (Ext. 115) Fax : 82 2 2659 8133

E-mail : [email protected], [email protected]

Documents

Broadcasting Multi-Format BC=CQCGCFC