HIGH PERFORMANCE ROOF UNDERLAYMENT 1 OF 1 - BROADCAST CUSTOM PRINT ADVERTISING LAST UPDATED 1/8/11 BROADCAST SM CUSTOM PRINT ADVERTISING System Components has quietly revolutionized custom print advertising with FelTex roof underlayments. Our unique printing method allows very short production runs (as little as a half-pallet), full-color printing, and alternating logos and messages on the largest print area available. Custom printing your roof underlayment is easier than ever. All we need is an electronic copy of the artwork and we’ll provide a layout for approval. Once approved, your order will normally ship in less than two weeks. HOW TO ORDER BROADCAST CUSTOM PRINT ADVERTISING Ordering custom print advertising on FelTex roof underlayments may be done in four easy steps: 1. Determine if you want a single logo, a logo and phone number / web site, or multiple logos. 2. Submit artwork to System Components, preferably electronically in vectored form (.eps, .ai). 3. Approve the returned artwork proof and place your order. Standard FelTex print BROADCAST printing in lane #2 with alternating logo and message. BROADCAST printing is available in all three lanes at a higher minimum print quantity. We offer the industry’s lowest minimum for custom-printed roof underlayments -- at only 18 per pallet, in a length of either 100’ or 250’. System Components Corporation P.O. Box 2432 Issaquah, WA 98027 Phone: 425-392-5150 • Fax: 425-392-1479 Email: [email protected] Highest Performance/Lightweight - #30 Felt Replacement

BROADCASTâ„¢ CUSTOM PRINT ADVERTISING - System Components Corp

Download PDF Report

Upload
others
View
8
Download
0

Embed Size (px)

Citation preview

Page 1: BROADCASTâ„¢ CUSTOM PRINT ADVERTISING - System Components Corp

HIGH PERFORMANCE ROOF UNDERLAYMENT

1 OF 1 - BROADCAST CUSTOM PRINT ADVERTISING LAST UPDATED 1/8/11

BROADCASTSM CUSTOM PRINT ADVERTISING

System Components has quietly revolutionized custom print advertising with FelTex roof underlayments. Our unique printing method allows very short production runs (as little as a half-pallet), full-color printing, and alternating logos and messages on the largest print area available. Custom printing your roof underlayment is easier than ever. All we need is an electronic copy of the artwork and we’ll provide a layout for approval. Once approved, your order will normally ship in less than two weeks.

HOW TO ORDER BROADCAST CUSTOM PRINT ADVERTISINGOrdering custom print advertising on FelTex roof underlayments may be done in four easy steps:1. Determine if you want a single logo, a logo and phone number / web site, or multiple logos.2. Submit artwork to System Components, preferably electronically in vectored form (.eps, .ai).3. Approve the returned artwork proof and place your order.

Standard FelTex print

BROADCAST printing in lane #2 with alternating logo and message.

BROADCAST printing is available in all

three lanes at a higher minimum print quantity.

We offer the industry’s lowest minimum for custom-printed roof underlayments -- at only 18 per pallet, in a length of either 100’ or 250’.

System Components CorporationP.O. Box 2432

Issaquah, WA 98027

Phone: 425-392-5150 • Fax: 425-392-1479Email: [email protected]

Highest Performance/Lightweight - #30 Felt Replacement