Bristol CD36 Vancouver CD36 - BLAUPUNKT · 2015. 2. 17. · You can use all Blaupunkt and Veloci-ty amplifiers. CD changers You can connect the following Blau-punkt CD changers: CDC

Radio CD

Bristol CD36 7 646 075 310

Vancouver CD36 7 646 067 310

http://www.blaupunkt.com

01Bristol_VancCD36 d 07.02.2006, 15:40 Uhr1

Operating instructions

2

3 4 51 2 6 7

13 12 10 9 811

01Bristol_VancCD36 d 07.02.2006, 15:40 Uhr2

26

CONTROLS1 Button to switch the device on/

off and operate the volumemute function.

2 button for detaching the con-trol panel (release panel).

3 button to eject a CD from thedevice.

4 Volume control

5 CD compartment

6 AUDIO button to adjust thebass, treble, balance and fader.To select an equalizer preset.

7 MENU buttonShort press: Open the settingsmenu.Long press: Start the scan func-tion.

8 Arrow buttons

9 X-BASS button to activate/de-activate and adjust the X-BASS.

: TRAF RDS buttonShort press: Switch traffic-infor-mation standby on/off.Long press: Switch the RDSfunction on/off.

; Keys 1 - 6< BND•TS button

Short press: Select the FMmemory banks and the MWand LW wavebands.Long press: Start the Travel-store function.

= SRC buttonShort press: Switch sources be-tween CD, CD changer (if con-nected) and AUX.Long press: Briefly display the

02Bristol_VancCD36 gb 07.02.2006, 15:42 Uhr26

27

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

CONTENTS

Notes and accessories ......... 28

Removable control panel ...... 29

Switching on/off ................... 30

Adjusting the volume ............ 31Setting the power-on volume ........ 31Quick volume reduction (mute) .... 32Switching the confirmation beepon/off ........................................... 32Mute while telephoning ................ 32

Radio mode........................... 33Adjusting the tuner settings .......... 33Switching to radio mode .............. 33RDS functions .............................. 33Selecting the waveband /memory bank ............................... 34Tuning into a station ..................... 34Setting the sensitivity of stationseek tuning .................................. 35Storing stations ............................ 35Storing stations automatically(Travelstore) ................................. 35Listening to stored stations .......... 35Scanning receivable stations(SCAN) ........................................ 35Setting the scanning time ............. 36Programme type (PTY) ................ 36Optimising radio reception ........... 37Configuring the display ................ 37

Traffic information ................ 38

CD mode ............................... 39Switching to CD mode................. 39Selecting tracks ........................... 39Fast track selection ...................... 39Fast searching (audible) ............... 39Random track play (MIX) .............. 39Scanning tracks (SCAN) ............. 40Repeating tracks (REPEAT) ......... 40

Pausing playback (PAUSE) .......... 40Configuring the display ................ 40Traffic announcements in CDmode ........................................... 40Ejecting a CD .............................. 41

CD-changer mode ................ 41Switching to CD-changer mode ... 41Selecting CDs ............................. 41Selecting tracks ........................... 41Fast searching (audible) ............... 41Configuring the display ................ 42Repeating individual tracks orwhole CDs (REPEAT) .................. 42Random track play (MIX) .............. 42Scanning all the tracks on allthe CDs (SCAN) .......................... 42Pausing playback (PAUSE) .......... 43

CLOCK time .......................... 43

Sound.................................... 44Adjusting the bass ....................... 44Adjusting the treble ...................... 44Setting the left/right volumedistribution (balance).................... 45Adjusting the front/rear volumedistribution (fader) ........................ 45Equalizer presets ......................... 45

X-BASS ................................. 46

Configuring the level display .. 46

External audio sources ......... 47

Specifications ....................... 47


28

Notes and accessoriesThank you for choosing a Blaupunktproduct. We hope you enjoy using thisnew piece of equipment.

Please read these operating instruc-tions before using the equipment forthe first time.The Blaupunkt editors are constantlyworking on making the operating in-structions clearer and easier to under-stand. However, if you still have anyquestions on how to operate the de-vice, please contact your dealer or thetelephone hotline for your country. Youwill find the telephone number printedat the back of this booklet.

We provide a manufacturer guaranteeon our products bought within the Eu-ropean Union. You can view the guar-antee conditions at www.blaupunkt.deor ask for them directly at:

Blaupunkt GmbHHotlineRobert Bosch Str. 200

D-31139 Hildesheim

Gerrmany

Disposal of old unit(EU countries only)

Do not dispose of your old devicein the household trash!

Use the return and collection systemsavailable to dispose of the old device.

NOTES AND ACCESSORIES

Road safety Road safety has absolute pri-

ority. Only operate your car soundsystem if the road and traffic condi-tions allow you to do so. Familiar-ise yourself with the device beforesetting off on your journey.You must always be able to hearpolice, fire service and ambulancesirens in good time from inside yourvehicle. For this reason, listen toyour car sound system at a moder-ate volume level during your jour-ney.

InstallationIf you want to install your car soundsystem yourself, please read the instal-lation and connection instructions thatfollow these operating instructions.

Optional equipment(not part of the scope of delivery)

Use only accessories approved byBlaupunkt.

Remote controlThe steering wheel and/or handheld re-mote control allows you to access themost important functions of your carsound system safely and convenient-ly.

You cannot switch the device on/off us-ing the remote control.

You can find out from your Blaupunktdealer or on the Internet at www.blaupunkt.com which remote controlscan be used with your car sound sys-tem.


29

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

AmplifiersYou can use all Blaupunkt and Veloci-ty amplifiers.

CD changersYou can connect the following Blau-punkt CD changers: CDC A 08, IDCA 09 and CDC A 03.

Removable control panel

Theft protectionAs a way of protecting your car radioagainst theft, the unit is equipped witha removable control panel (release pa-nel). Without this control panel, the carradio is worthless to a thief.Protect you car radio against theft bytaking the control panel with you everytime you leave your vehicle. Do not lea-ve the control panel in your vehicle -not even in a hiding place.The control panel has been designedto be easy to use.

Notes: Never drop the control panel.

Never expose the control panel todirect sunlight or other heat sour-ces.

Avoid making direct skin contactwith the control panel’s contacts. Ifnecessary, clean the contacts witha lint-free cloth and some alcohol.

Removing the control panel

2

Press the button 2.

The control panel locking mechanismopens.

CONTROL PANELACCESSORIES


30

Switching on/offYou can switch the device on/off in thefollowing ways:

Switching on/off using the vehicleignitionIf the device is correctly connected tothe vehicle’s ignition and it was notswitched off using button 1, it willswitch on/off simultaneously with theignition.

Switching on/off using button 1

To switch on the device, pressbutton 1.

To switch off the device, press andhold down button 1 for longerthan two seconds.

The device switches off.

Note: To protect the vehicle battery, the

device will switch off automaticallyafter one hour if the ignition is off.

Switching on by inserting a CDIf the device is switched off and thereis no CD present in the drive,

gently push the CD with its printedside uppermost into the drive 5until you feel some resistance.

The drive draws in the CD automati-cally.

You must not hinder or assist the driveas it draws in the CD.

The device switches on and starts play-ing the CD.

First, pull the control panel straightoff the unit and then out towardsthe left.

The device switches off.

All the current settings are saved.

Any CD already inserted in the unit re-mains there.

Attaching the control panel Slide the control panel from left to

right into the unit’s guide.

Carefully press on the left edge ofthe control panel until it clicks intoplace.

Note: When attaching the control panel,

make sure you do not press thedisplay.

If the device was still switched on whenyou removed the control panel, it willautomatically switch on again with thelast settings activated (i.e. radio, CD,CD changer or AUX) when the panelis replaced.

SWITCHING ON/OFFCONTROL PANEL


31

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Note: If the vehicle ignition was switched

off before you inserted the CD,you will first have to switch on thedevice by pressing button 1 inorder to start playing the CD.

Switching on/off using theremovable control panel

Remove the control panel.

The unit switches off.

Attach the control panel again.

The unit switches on. The settings (ra-dio, CD, CD changer or AUX) that wereset before the unit was switched off willbe reactivated.

Adjusting the volumeYou can adjust the volume in stepsfrom 0 (off) to 66 (maximum).

To increase the volume,

press the button 4.

To decrease the volume,

press the button 4.

Setting the power-on volume

Note: The device is equipped with a

timeout function. If, for instance,you press the MENU button 7and select a menu item, the de-vice will switch back approx. 8seconds after the last button waspressed. Any changes to the set-tings that you have made will besaved.

You can set the power-on volume.

Press the MENU button 7.

Press the or button 8 re-peatedly until “ON VOLUME” ap-pears in the display.

Adjust the power-on volume usingthe buttons 8.

To help you adjust the setting moreeasily, the device will increase or de-crease the volume as you make yourchanges.

If you change the setting to “LASTVOL”, the volume level that was set thelast time you switched off the devicewill be activated again.

ADJUSTING THE VOLUMESWITCHING ON/OFF


32

Note: To protect your hearing, the pow-

er-on volume is limited to a valueof “38”. If the volume level washigher than this when the devicewas last switched off and the“LAST VOL” setting is activated,the system will reset the volume to“38” when you switch the deviceon again.

When you have finished adjusting thesetting,

press the MENU button 7 twice.

Quick volume reduction (mute)You can quickly decrease the volume(mute) to a level preset by you.

Briefly press button 1.

“MUTE” appears in the display.

Cancelling muteTo return to your previously set volumelevel,

briefly press button 1 again.

Setting the mute levelYou can adjust the mute level.


Press the or button 8 re-peatedly until “MUTE LVL” ap-pears in the display.

Adjust the mute level using the buttons 8.



ADJUSTING THE VOLUME

Switching the confirmationbeep on/offThe system will play a confirmationbeep for some functions if you keep abutton pressed down for longer thantwo seconds, for instance, when youassign a radio station to a station but-ton. You can switch the beep on/off.


Press the or button 8 re-peatedly until “BEEP ON” or“BEEP OFF” appears in the dis-play.

Activate/deactivate the beep usingthe buttons 8. “OFF” meansthe beep is switched off and “ON”means the beep is switched on.


press the MENU button 7.

Mute while telephoningIf your device is connected to a mobiletelephone, the car radio’s volume willbe muted as soon as you “pick up” thetelephone. This requires that the mo-bile telephone be connected to the de-vice as described in the installation in-structions.

“PHONE” appears in the display.


33

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Radio mode

Adjusting the tuner settingsTo ensure that the tuner works proper-ly, the device must be configured forthe region in which it is being used. Youcan choose between Europe (EU-ROPE), United States (USA), SouthAmerica (S-AMERICA) and Thailand(THAI). By default, the tuner is set tothe region in which the device was sold.If you encounter problems with radioreception, please check this setting.

The radio functions described in theseoperating instructions refer to the EU-ROPE tuner setting.

Switch the device off using button1.

Press and hold down the 1 and 5buttons ; simultaneously andswitch on the device again bypressing button 1.

“TUNER” is displayed.

Select your tuner region using the or button 8.

To save the setting,

switch the device off and on againor wait approx. 8 seconds. Thecar sound system switches on andthe mode that was selected last isactivated (radio, CD, CD changeror AUX).

Switching to radio modeIf you are in CD, CD-changer or AUXmode,

press the BND•TS button <or

press the SRC button = re-peatedly until the memory bank(e.g. “FM1”) appears in the dis-play.

RDS functionsThis device is equipped with an RDSradio receiver (Radio Data System).Many of the receivable FM stationsbroadcast a signal that not only car-ries the programme but also addition-al information such as the station nameand programme type (PTY).

The station name appears in the dis-play as soon as the tuner receives it.

The convenient RDS functions AF (Al-ternative Frequency) and REGIONALextend your radio’s range of functions.

AF: If the RDS function is activat-ed, the radio automatically tunesinto the best receivable frequencyfor the station that is currently set.

REGIONAL: At certain times,some radio stations divide theirprogramme into regional pro-grammes providing different con-tent. You can use the REG func-tion to prevent the car radio fromswitching to alternative frequen-cies that are broadcasting differentprogramme content.

Note: REGIONAL must be activated/de-

activated separately in the menu.

RADIO MODE


34

Switching the RDS function on/offIf you want to use the RDS functions(AF and REGIONAL),

press and hold down the TRAFRDS button : for longer than twoseconds.

The RDS function is active when theRDS symbol is shown in the display.

Switching REGIONAL on/off


Press the or button 8 re-peatedly until “REG” appears inthe display. “OFF” or “ON” is dis-played alongside “REG”.

To switch REGIONAL on/off, pressthe or button 8.


Selecting the waveband /memory bankYou can use this device to receive pro-grammes broadcast over the FM fre-quency range as well as the MW andLW (AM) wavebands. There are threememory banks available for the FMwaveband (FM1, FM2 and FMT) andone for each of the MW and LW wave-bands. Six stations can be stored ineach memory bank.

To switch between the FM memorybanks (FM1, FM2 and FMT) and theMW and LW wavebands,

briefly press the BND•TS button<.

Tuning into a stationThere are various ways of tuning intoa station.

Automatic station seek tuning

Press the or button 8.

The radio tunes into the next receiva-ble station.

Tuning into stations manuallyYou can also tune into stations manu-ally.

Note: You can only tune into stations

manually if the RDS function isdeactivated.


Browsing through broadcastingnetworks (only FM)If radio stations provide several pro-grammes, you have the option ofbrowsing through their “broadcastingnetworks”.

Note: The RDS function must be activat-

ed before you can use this fea-ture.

Press the or button 8 toswitch to the next station on thebroadcasting network.

Note: When using this feature, you will

only be able to switch to stationsthat you have received once be-fore already. To receive the sta-tions, use the scan function or theTravelstore function.

RADIO MODE


35

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Setting the sensitivity of stationseek tuningYou can choose whether the radioshould only tune into stations provid-ing good reception or whether it canalso tune into those with a weak re-ception.


Press the or button 8 re-peatedly until “SENS” and the cur-rently set value appear in the dis-play.

“SENS HI6” means that the tuner is setto the highest sensitivity setting. “SENSLO1” means it is set to the lowest sen-sitivity setting.

Set the desired sensitivity usingthe buttons 8.



Note: You can set different sensitivity

levels for FM and MW or LW(AM).

Storing stations

Storing stations manually Select the memory bank that you

want (FM1, FM2, FMT) or one ofthe wavebands (MW or LW).

Tune into the station that youwant.

Press and hold down one of thestation buttons 1 - 6 ; for longerthan two seconds to assign thestation to that button.

Storing stations automatically(Travelstore)You can automatically store the six sta-tions providing the best reception in theregion (only FM). The stations arestored in the FMT memory bank.

Note: Any stations previously stored in

this memory bank are deleted inthe process.

Press and hold down the BND•TSbutton < for longer than two sec-onds.

The storing procedure begins. “FMTSTORE” appears in the display. Afterthe process has completed, the radiowill play the station that is stored inmemory location 1 of the FMT memo-ry bank.

Listening to stored stations Select the memory bank or wave-

band.

Press the station button 1 - 6 ;that corresponds to the stationthat you want to listen to.

Scanning receivable stations(SCAN)You can use the scan function to listento all the receivable stations briefly. Youcan set the scanning time in the menuto between 5 and 30 seconds (in stepsof 5 seconds).

Starting SCAN Press and hold down the MENU

button 7 for longer than two sec-onds.

RADIO MODE


36

Scanning begins. “SCAN” appearsbriefly in the display followed by a flash-ing display of the current station nameor frequency.

Cancelling SCAN and continuinglistening to a station


Scanning stops and the radio contin-ues playing the station that it tuned intolast.

Setting the scanning time Press the MENU button 7.

Press the or button 8 re-peatedly until “SCAN TIME” ap-pears in the display.

Set the desired scanning time us-ing the buttons 8.



Note: The scanning time that you set is

also used when scanning in CDmode and in CD-changer mode.

Programme type (PTY)Besides transmitting the station name,some FM stations also provide infor-mation on the type of programme theyare broadcasting. Your car radio canreceive and display this information.

For example, the programme typescan be:

CULTURE TRAVEL JAZZSPORT NEWS POPROCK CLASSICS

You can use the PTY function to se-lect stations of a particular programmetype.

PTY-EONIf you specify the programme type andstart seek tuning, the radio will switchfrom the current station to a station ofthe selected programme type.

Notes: If the tuner does not find a station

that matches the selected pro-gramme type, you will hear a beepand “NO PTY” appears briefly inthe display. The radio will then re-tune to the station that it receivedlast.

If the tuned radio station or anoth-er station on the broadcasting net-work broadcasts your selectedprogramme type at a later point intime, the radio will automaticallyswitch from the currently tunedstation or from CD mode or CD-changer mode to the stationwhose programme type matchesthe one you selected.

If you do not want this PTY EONswitching, disable it in the menuwith “PTY OFF”. First, press oneof the SRC = or BND•TS but-tons <.

Switching PTY on/off


Press the or button 8 re-peatedly until “PTY ON” or “PTYOFF” appears in the display.

RADIO MODE


37

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Press the or button 8 toswitch PTY ON or OFF.


Selecting the PTY languageYou can select the language in whichthe programme types are displayed.The following are available:“DEUTSCH”, “ENGLISH” and“FRANÇAIS”.


Press the or button 8 re-peatedly until “PTY LANG” ap-pears in the display.

Set your preferred language usingthe buttons 8.



Selecting a programme type andstarting seek tuning


The current programme type appearsin the display.

If you want to select another pro-gramme type, you can do so bypressing the or button 8whilst this display is visible.

The selected programme type appearsbriefly in the display.

Press the or button 8 tostart seek tuning.

The radio will then tune into the nextstation it finds that matches your se-lected programme type.

Optimising radio reception

HICUTThe HICUT function improves recep-tion during poor radio reception (onlyFM). If interference occurs, the inter-ference level is cut automatically.

Switching HICUT on/off Press the MENU button 7. Press the or button 8 re-

peatedly until “HICUT” appears inthe display.

Press the or button 8 to ad-just the HICUT setting.

“HICUT 0” means that the interferencelevel will not be cut automatically. “HI-CUT 1” means that it will be cut auto-matically.


Configuring the displayIn radio mode you have the option ofdisplaying the waveband together withthe memory bank / memory locationand the time or the station name / fre-quency of the current station.

Select “FREQUENCY” to display thestation name / frequency or select“CLOCK” to display the waveband to-gether with the memory bank / memo-ry location and the clock time. Press the MENU button 7.

Press the or button 8 re-peatedly until “TUN DISP” ap-pears in the display.

Press the or button 8 toswitch between “CLOCK” and“FREQUENCY”.

Press the MENU button 7 twice.

RADIO MODE


38

Traffic informationYour device is equipped with an RDS-EON receiver. EON stands for En-hanced Other Network.

Whenever a traffic announcement (TA)is broadcast, the system switches au-tomatically from a station that does notprovide traffic reports to the appropri-ate traffic information station within thebroadcasting network that does.

Once the traffic report has been played,the system will switch back to the pro-gramme you were listening to before.

Switching traffic informationpriority on/off Briefly press the TRAF RDS but-

ton :.

Traffic announcement priority is activewhen the traffic-jam symbol lights upin the display.

Notes:You will hear a warning beep:

if you leave the reception area ofa traffic information station thatyou are currently listening to.

if you are receiving a traffic infor-mation station and the volume isset to minimum (0) or if, whilst lis-tening to a CD, a CD in the chang-er or an AUX source, you leavethe reception area of the tunedtraffic information station and thesubsequent automatic search can-not find a new traffic informationstation.

if you retune the radio from a traf-fic information station to a stationthat does not broadcast traffic in-formation.

If you hear the warning beep, you caneither switch off traffic information pri-ority or tune into a station that broad-casts traffic information.

Setting the volume for trafficannouncements Press the MENU button 7.

Press the or button 8 re-peatedly until “TA VOLUME” ap-pears in the display.

Adjust the volume using the buttons 8.



Notes: You can use the volume control

4 to adjust the volume during atraffic announcement for the dura-tion of that announcement.

You can set the volume distribu-tion for the traffic announcements.For further details, please read the“Sound” chapter.

TRAFFIC INFORMATION


39

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

If there is already a CD inserted in thedrive,

press the SRC button = re-peatedly until “CD” appears in thedisplay.

Playback begins from the point atwhich it was last interrupted.

Selecting tracks Press one of the arrow buttons 8

to select the next or previoustrack.

If you press the or button 8 once,the current track will be played againfrom the beginning.

Fast track selectionFor fast track selection (backwards orforwards),

press and hold down one of the buttons 8 until fast-reverse /

fast-forward track selection be-gins.

Fast searching (audible)For fast searching (backwards or for-wards),

press and hold down one of the buttons 8 until fast search-

ing backwards / forwards begins.

Random track play (MIX) Press the 5 MIX button ;.

“MIX CD” appears briefly in the displayand the MIX symbol lights up. The nextrandomly selected track will then beplayed.

CD modeYou can use this device to play stand-ard audio CDs, CD-Rs and CD-RWswith a diameter of 12 or 8 cm.

Risk of severe damage to theCD drive!Contoured CDs (shape CDs) arenot suitable for playback in this unit.We do not accept responsibility forany damage to the CD drive thatmay occur as a result of the use ofunsuitable CDs.

To ensure the system functions prop-erly, only use CDs labelled with thecompact disc logo. Problems might beexperienced when playing copy-pro-tected CDs. Blaupunkt cannot guaran-tee the proper functioning of copy-pro-tected CDs!

Switching to CD modeIf there is no CD inserted in the drive,

gently push the CD with the print-ed side uppermost into the CDcompartment 5 until you feelsome resistance.

The drive draws in the CD automatic-ally.

You must not assist or hinder the driveas it draws in the CD.

The CD starts playing.

Note: If the vehicle ignition was switched

off before you inserted the CD,you will first have to switch on thedevice by pressing button 1 inorder to start playing the CD.

CD MODE


40

“RPT OFF” appears briefly in the dis-play and the RPT symbol disappears.Normal playback is then resumed.

Pausing playback (PAUSE) Press button 3 ;.

“PAUSE” appears in the display.

Cancelling pause

Press button 3 ; whilst pauseis activated.

Playback is resumed.

Configuring the displayYou can choose between two displaytypes for CD mode:

Track number and clock time

Track number and playing time


Press the or button 8 re-peatedly until “CD DISP” appearsin the display.

Press the or button 8 toswitch between “PLAY TIME” and“CLOCK”.


Traffic announcements in CDmodeIf you wish to receive traffic announce-ments whilst CD mode is activated,

press the TRAF RDS button :.

Traffic announcement priority is activewhen the traffic jam symbol is shownin the display. For further details, pleaseread the “Traffic information reception”chapter.

Cancelling MIX

Press the 5 MIX button ; again.

“MIX OFF” appears briefly in the dis-play and the MIX symbol disappears.

Scanning tracks (SCAN)You can scan (briefly play) all the trackson the CD.

Press and hold down the MENUbutton 7 for longer than two sec-onds.

The next track will then be scanned.

Note: You can set the scanning time.

For further details, please read thesection entitled “Setting the scan-ning time” in the “Radio mode”chapter.

Cancelling SCAN and continuinglistening to a track

To cancel scanning, press theMENU button 7.

The currently scanned track will thencontinue to be played normally.

Repeating tracks (REPEAT)If you want to repeat a track,

press the 4 RPT button ;.

“RPT TRCK” appears briefly in the dis-play and the RPT symbol lights up. Thetrack is repeated continuously until youdeactivate RPT.

Cancelling REPEATIf you want to cancel the repeat func-tion,

press the 4 RPT button ; again.

CD MODE


41

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Ejecting a CD Press the button 3 next to the

CD compartment.

The CD is ejected.

Remove the CD.

Notes: If a CD is ejected, the drive will

automatically draw it back in againafter approx. 10 seconds.

You can also eject CDs whilst thedevice is switched off or whilst an-other audio source is activated.

CD MODE

CD-changer mode

Note: Information on handling CDs, in-

serting CDs and operating the CDchanger can be found in the oper-ating instructions supplied withyour CD changer.

Switching to CD-changer mode Press the SRC button = re-

peatedly until “CHANGER” ap-pears in the display.

The device starts playing the first CDthat the CD changer detects.

Selecting CDsTo move up or down to another CD,

press the or button 8 onceor several times.

Note: The device will ignore empty CD

slots in the changer and slots con-taining invalid CDs.

Selecting tracksTo move up or down to another trackon the current CD,

press the or button 8 onceor several times.

Fast searching (audible)For fast searching (backwards or for-wards),

press and hold down one of the buttons 8 until fast search-

ing backwards / forwards begins.

CD-CHANGER MODE


42

Configuring the displayThere are five display options availa-ble for CD-changer mode:

Track number and playing time(“TRCK-TIME”)

Track number and clock time(“TRCK-CLK”)

CD number and track number(“CD-TRCK”)

CD number and clock time(“CD-CLK”)

CD number and playing time(“CD-TIME”)


Press the or button 8 re-peatedly until “CDC DISP” ap-pears in the display.

Press the or button 8 re-peatedly until the option that youwant is displayed.


Repeating individual tracks orwhole CDs (REPEAT)To repeat the current track,

briefly press the 4 RPT button ;.

“RPT TRCK” appears briefly and RPTlights up in the display.

To repeat the current CD,

press and hold down the 4 RPTbutton ; for longer than two sec-onds.

“RPT DISC” appears briefly and RPTlights up in the display.

Cancelling REPEATTo stop the current track or current CDfrom being repeated,

briefly press the 4 RPT button ;.

“RPT OFF” appears and RPT disap-pears from the display.

Random track play (MIX)To play the tracks on the current CD inrandom order,

briefly press the 5 MIX button ;.

“MIX CD” appears briefly and MIXlights up in the display.

To play the tracks on all the insertedCDs in random order,

press and hold down the 5 MIXbutton ; for longer than two sec-onds.

“MIX ALL” appears briefly and MIXlights up in the display.

Cancelling MIX Briefly press the 5 MIX button ;.

“MIX OFF” appears and MIX disap-pears from the display.

Scanning all the tracks on allthe CDs (SCAN)To scan (briefly play) all the tracks onall the inserted CDs in ascending or-der,

press and hold down the MENUbutton 7 for longer than two sec-onds.

“TRK SCAN” appears in the displayand the number of the current trackflashes.

CD-CHANGER MODE


43

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Cancelling SCANTo stop scanning,

briefly press the MENU button 7.

The currently scanned track will thencontinue to be played normally.

Note: You can set the scanning time.

For further details, please read thesection entitled “Setting the scan-ning time” in the “Radio mode”chapter.

Pausing playback (PAUSE) Press button 3 ;.

“PAUSE” appears in the display.

Cancelling pause

Press button 3 ; whilst pauseis activated.

Playback is resumed.

CLOCK time

Displaying the clock timeTo display the clock time briefly,

press and hold down the SRC button = until the clock time ap-pears in the display.

Setting the clock timeTo set the clock time,


Press the or button 8 re-peatedly until “CLOCK SET” ap-pears in the display.

Press the button 8.

The clock time appears in the display.The hours flash and can be adjusted.

Adjust the hours using the buttons 8.

Once the hours are set,

press the button 8.

The minutes flash.

Adjust the minutes using the buttons 8.


Selecting 12/24-hour clockmode Press the MENU button 7.

“MENU” appears in the display.

Press the or button 8 re-peatedly until “24 H MODE” or “12H MODE” appears in the display.

Press the or button 8 toswitch between the modes.

CD-CHANGER MODE CLOCK TIME


44



Displaying the timecontinuously when the device isoff and the ignition is onTo display the time when the device isoff and the vehicle ignition is on,



Press the or button 8 re-peatedly until “CLOCK OFF” or“CLOCK ON” appears in the dis-play.

Press the or button 8 toswitch between the ON/OFF set-tings.



Briefly displaying the timewhen the device is switched offTo display the time briefly when the de-vice is off,

press the SRC button =.

The time is displayed for approx. 8 sec-onds.

SoundYou can adjust the sound settings(bass and treble) separately for eachsource (radio, CD, CD changer orAUX).

The volume distribution settings (bal-ance and fader) apply to all the audiosources (except for traffic announce-ments).

You can only adjust the balance andfader settings for traffic announce-ments whilst a traffic announcementis actually being played.

Adjusting the bass Press the AUDIO button 6.

“BASS” appears in the display.

Press the or button 8 to ad-just the bass.


press the AUDIO button 6.

Adjusting the treble Press the AUDIO button 6.


Press the button 8 repeatedlyuntil “TREBLE” appears in the dis-play.

Press the or button 8 to ad-just the treble.



CLOCK TIME SOUND


45

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Setting the left/right volumedistribution (balance)To adjust the left/right volume distribu-tion (balance),



Press the button 8 repeatedlyuntil “BAL” appears in the display.

Press the or button 8 to ad-just the balance (right/left).



Adjusting the front/rear volumedistribution (fader)To adjust the front/rear volume distri-bution (fader),



Press the button 8 repeatedlyuntil “FADER” appears in the dis-play.

Press the or button 8 to ad-just the fader (front/rear).



Equalizer presetsThis device is equipped with an equal-izer that has been preset with settingsfor the “ROCK”, “POP” and “CLASSIC”music styles.

To select an equalizer preset,



Press the button 8 repeatedlyuntil “POP”, “ROCK”, “CLASSIC”or “EQ OFF” appears in the dis-play.

Press the or button 8 to se-lect one of the presets or select“EQ OFF” to switch off the equal-izer. If you select one of the pre-sets, it is shown continuously inthe display.



SOUND


46

X-BASSYou can use the X-Bass feature toboost the bass at low volume levels.

The selected X-Bass setting affects allthe audio sources (radio, CD, CDchanger or AUX).

You can set the X-BASS boost in stepsranging from 1 to 3.

“XBASS OFF” means that the X-BASSfunction is switched off.

Adjusting the X-BASS boost

Press the X-BASS button 9.

Press the or button 8 re-peatedly until the setting that youwant appears in the display.


press the X-BASS button 9.

Configuring the leveldisplayThe level display temporarily providesyou with a symbolic representation ofthe volume and audio settings whilstyou are adjusting them.

When you are not changing any set-tings, the level display depicts the peakmusic/speech output. You can switchthe level display on/off.



Press the or button 8 re-peatedly until “PEAK LVL” ap-pears in the display.

Press the or button 8 toswitch between “PEAK ON” and“PEAK OFF”.



X-BASS LEVEL DISPLAY


47

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

SPECIFICATIONS

External audio sourcesInstead of connecting a CD changer,you can connect another audio sourceequipped with a line output. Audiosources can, for example, be portableCD players, MiniDisc players or MP3players.

If you want to connect an external au-dio source, you will need an adaptercable. You can obtain this cable (Blau-punkt no.: 7 607 897 093) from yourauthorised Blaupunkt dealer.

Note: If no CD changer is connected,

the AUX input must be activated inthe menu.

Switching the AUX input on/off Press the MENU button 7.


Press the or button 8 re-peatedly until “AUX OFF” or “AUXON” appears in the display.

Press the or button 8 toswitch AUX on/off.



Note: If the AUX input is activated, you

can select it by pressing the SRC button =. “AUX INPUT” then

appears in the display.

Specifications

AmplifierOutput power: 4 x 25 watts sine

in accordance withDIN 45 324at 14.4 V4 x 45 watts max.power

TunerWavebands in Europe:FM : 87.5 - 108 MHzMW: 531 - 1 602 kHzLW : 153 - 279 kHz

FM frequency response:35 - 16,000 Hz

CDFrequency response:

20 - 20,000 Hz

Pre-amp out4 channels: 2 V

Input sensitivityAUX input: 2 V / 6 kΩ

Weight: 1.33 kg

Subject to changes!

EXTERNAL AUDIO SOURCES


217

DA

NS

KE

NG

LIS

HD

EU

TS

CH

FR

AN

ÇA

ISIT

AL

IAN

ON

ED

ER

LAN

DS

SV

EN

SK

AE

SPA

ÑO

LP

OR

TUG

UÊ

S

Bitte den ausgefüllten Gerätepass sicher aufbewahren!Please keep the filled-in radio pass in a safe place!Prière de conserver soigneusement la carte d’autoradio remplie !Tenete per favore il libretto di apparecchio, debitamente riempito,in un posto sicuro!Bewaar de ingevulde apparaatpas op een veilige plaats!Vänligen förvara ifyllt apparatpass på säker plats!¡Favor guardar el documento del aparato debidamente llenado enun lugar seguro!Por favor, guardar o cartão preenchido do aparelho num lugarseguro!Det udfyldte apparatpas opbevares et sikkert sted!

EA Bristol_VancCD36 07.02.2006, 15:34 Uhr217

*

Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim

01/06 - CM-AS/SCS(dt, gb, fr, it, nl, sw, es, pt, dk)

Name: ..................................................................

Typ: 7 646 .........................................................

Serien-Nr.: BP .............................................................

GerätepassGerätepassGerätepassGerätepassGerätepass

Country: Phone: Fax: WWW:

Germany (D) 0180-5000225 05121-49 4002 http://www.blaupunkt.comAustria (A) 01-610 39 0 01-610 39 391Belgium (B) 02-525 5444 02-525 5263Denmark (DK) 44 898 360 44-898 644Finland (FIN) 09-435 991 09-435 99236France (F) 01-4010 7007 01-4010 7320Great Britain (GB) 01-89583 8880 01-89583 8394Greece (GR) 210 94 27 337 210 94 12 711Ireland (IRL) 01-46 66 700 01-46 66 706Italy (I) 02-369 62331 02-369 62464Luxembourg (L) 40 4078 40 2085Netherlands (NL) 0800 400 1010 0800 400 1040Norway (N) 66-817 000 66-817 157Portugal (P) 2185 00144 2185 00165Spain (E) 902 52 77 70 91 410 4078Sweden (S) 08-7501850 08-7501810Switzerland (CH) 01-8471644 01-8471650Czech. Rep. (CZ) 02-6130 0446 02-6130 0514Hungary (H) 76 511 803 76 511 809Poland (PL) 0800-118922 022-8771260Turkey (TR) 0212-335 06 71 0212-346 00 40USA (USA) 800-950-2528 708-6817188Brasil(Mercosur) (BR) 0800 7045446 +55-19 3745 2773Malaysia(Asia Pacific) (MAL) +604-6382 474 +604-6413 640

8622404872

EA Bristol_VancCD36 07.02.2006, 15:34 Uhr218

Documents

Bristol CD36 Vancouver CD36 - BLAUPUNKT · 2015. 2. 17. · You can use all Blaupunkt and Veloci-ty amplifiers. CD changers You can connect the following Blau-punkt CD changers: CDC