Embed Size (px)
Citation preview
BRIGHT TIMESIn this issue
TESA
Dear Friends,
In this issue we are proud to announce the addition of Tesa brand of tapes to the Blue Rhine range. Tesa is the world-wide leader in high performance tapes. Today their products are well-hidden within in many key products used in our daily life, Tesa tapes are used to hold together electrical cables, panels and even logos on cars. Tesa double-side tapes hold together critical components within a majority of today's smartphones and tablets.
The range of products from Tesa that we will carry are best suited to the signage and construction industry. Depending on the application we can guide you to choose the right product for your projects. The ACX range of tapes have been developed using some of the most advanced adhesive technology known today.
You may be familiar with the many red tapes available in the market today. The original killer red tape is a invention of Tesa, which was then later widely copied due to its success. The 4965 tape also referred to as the killer tape, it is the industry leader in terms of performance and market share for an all-purpose double side tape. If you have never used Tesa, we hope you will test them for your next project. Regards,
Anand JosephGeneral Manager+971 50 [email protected]
DOUBLE-SIDED TAPE is a pressure sensitive tape that is coated with adhesive on both sides. It is designed to stick two surfaces together, often in a way which is not visible in the end product, due to it being in between the objects rather than overlaying them. This allows for neater looking projects and better craftsmanship. Double sided tape can be either thin or dimensional. Dimensional tape is thicker, and is of particular use to retail and signage uses where it can be used to allow signs or displays to stand out with a 3-D effect.
Constructive Bonding TapesACX Plus – Constructive bonding is a key element in every industry. High-tech materials with special properties & dissimilar materials can be bonded. The traditional use of rivets, welds or screws can damage the material; in such cases ACX Plus is highly recommended.They with stand very low & high temperature, water, UV light and some chemicals.
ACX Plus is characterized by:
Bonding Power Stress Dissipation Temperature & Weather Resistance
7055
Bonding of transparent and translucent materials
Due to the transparency it is suitable to apply on Glass or clear Acrylic/Polycarbonate sheets.
Size: 12mm x 25m & 19mm x 25m
Thickness: 1mm
7063
Bonding of hard-to-bond materials
Bonding between powder coated/plastic materials or metal–metal bonding.
Size: 12mm x 25m & 19mm x 25m
Thickness: 0.8mm
7074
Bonding of panels and reinforcement bars
Suitable for outdoors. For bonding between powder coated/plastic materials or metal–metal bonding.
Size: 12mm x 25m, 19mm x 25m & 25mm x 25m
Thickness: 1mm
“ACX Plus is an alternative to the traditional mechanical fastening methods & offer substantial advantages”
Industrial Bonding TapesTransparent double-sided self-adhesive tape consisting of a PET backing and a tackyfied acrylic adhesive.For Bonding ABS, Rubber/EPDM profiles, mouldings- Furniture industry/Battery packs/Lens/Touch screens in electronic devices. Reliable bond even to LSE substrates. It's a solvent acrylic polyester tape with a temperature range of 100°C long term & 200°C short term.
Foam Tape Bonding Excellent humidity resistance, shock absorption during transport and in daily use.
4965
Permanent double sided transparent polyester tape is suitable for indoor and outdoor use.
Temp: 100°C long term & 200°C short term.Thickness: 205µm
Size: 12mm x 50m, 19mm x 50m, 25mm x 50m & 50mm x 50m
4967
Transparent, double sided, self-adhesive tape consisting of a PET film backing and a modified acrylic adhesive.
Temp: 100°C long term & 200°C short term.
Thickness: 160µm.
Size: 12mm x 50m,19mm x 50m,25mm x 50m& 50mm x 50m
4982
Double-sided strong lamination filmic tape.
An economy version of double side tape. Good bonding strength to most common, smooth & evensubstrates.
Temp: 100°C long term & 200°C short term.
Thickness: 100µm
Size: 12mm x 50m,19mm x 50m,25mm x 50m& 50mm x 50mt
Applications
4970
Double-sided filmic tape with high adhesion. It is a thick white double-sided self-adhesive tape consisting of a PVC-film backing and a tackified acrylic adhesive. High coating weight for good bonding performance on rough or dusty surfaces.Full suitability for long-term applications.
Temp: 60°C long term & 70°C short term. Thickness: 240µm
Applications: Mounting of plastic and wooden trims Mounting of decorative POS materials and displays Mounting of signs and scalest
62932
Double-sided PE foam tape for constructive mounting. It offers an excellent long-term adhesive performance for demanding constructive applications at a small design gap.
Temp: 80°C long term & 80°C short term. Thickness: 500µm
Applications:Decorative aluminium cover screens on brown goodsDoor handles in kitchen furnitureMoulded decorative profiles for refrigerators or freezersGlass and mirror panels
4957
Double-sided general purpose PE-foam tape. Tesa 4957 is a double-sided tape consisting of a very conformable closed cell PE-foam backing and a shear resistant modified acrylic adhesive. It is fully suitable for outdoor use and is available in black and white.
Temp: 80°C long term & 80°C short term. Thickness: 1100µm
Applications:POS displays, exhibition sample displaysShelf edge labels, Cable channels, window and kitchen profilesDecorative glass or mirrorelements on furnitureSigns & Emblems
51570
Double-sided non-woven tape. It is used for permanent mounting of metal and plastic materials, e.g. aluminum, polystyrene, polypropylene, ABS. The thick layer of adhesive bonds well on uneven surfaces and has a very high initial bond. Thickness: 110µm
Temp: 40°C long term & 80°C short term. Applications: General purpose mounting.
Non Wowen Tapes
Adhesive Spray
60021
Is very versatile glue for permanently bonding materials such as paper, card-board, felt, fabric, film, wood, leather, polystyrene and manydifferent plastics.
Adhesive Spray Remover
60042
Is a spray for easy removal of glue residue from plastic parts, glass and metal surfaces. Spray reaches even concealed and hard to reach places Free from silicone.
SPRAY
50
0 m
l2
00
ml
UAE Customer Support # 800 RHINE(74463) Locations: UAE - Saudi Arabia - Oman
4959
Double-sided non-woven tape. It is a double-sided mounting and splicing tape, equipped with a non-woven backing and coated with an acrylic adhesive of high tack and good shear strength. It is UV and age-resistant as well as largely resistant to plasticizers.
Temp: 80°C long term & 200°C short term. Thickness: 100µm
Applications: Mounting signs, covers and nameplates Mounting door linings in the car industry Mounting plastic bags, dispatch bags, continuous stationery, posters, splicing paper and film webs
Technical Features
Issue 26 November 2013
7Issue 26 November 2013
P.O. Box No: 27402, Dubai, UAE. Tel: + 971-4 -2664647. Fax: + 971- 4-2628853. E mail: [email protected] www.bluerhine.com
We look forward to hearing from you
7
Solid Pure Acrylic
200°C
100°C
24 N/cm
10 N/cm
Product
Construction
Short-term temperatureresistance [minutes]*
Long-term temperature resistance[weeks]*
Adhesion to steel[after3days]
Adhesion to ABS[after 3 days]
Foamed Pure Acrylic
220°C
120°C
30 N/cm
8 N/cm
Foamed Modified Acrylic
170°C
70°C
35 N/cm
30 N/cm
*According to tesa test method Note: The technical information and data mentioned above, should be considered representative or typical for aproduct design of 1000µm only and should not be used for specification purposes.
Tesa® ACXplus 7055High Transparency
Tesa® ACXplus 7063High Adhesion
Tesa® ACXplus 7074High Resistance
BRIGHT TIMESIn this issue
TESA
Dear Friends,
In this issue we are proud to announce the addition of Tesa brand of tapes to the Blue Rhine range. Tesa is the world-wide leader in high performance tapes. Today their products are well-hidden within in many key products used in our daily life, Tesa tapes are used to hold together electrical cables, panels and even logos on cars. Tesa double-side tapes hold together critical components within a majority of today's smartphones and tablets.
The range of products from Tesa that we will carry are best suited to the signage and construction industry. Depending on the application we can guide you to choose the right product for your projects. The ACX range of tapes have been developed using some of the most advanced adhesive technology known today.
You may be familiar with the many red tapes available in the market today. The original killer red tape is a invention of Tesa, which was then later widely copied due to its success. The 4965 tape also referred to as the killer tape, it is the industry leader in terms of performance and market share for an all-purpose double side tape. If you have never used Tesa, we hope you will test them for your next project. Regards,
Anand JosephGeneral Manager+971 50 [email protected]
DOUBLE-SIDED TAPE is a pressure sensitive tape that is coated with adhesive on both sides. It is designed to stick two surfaces together, often in a way which is not visible in the end product, due to it being in between the objects rather than overlaying them. This allows for neater looking projects and better craftsmanship. Double sided tape can be either thin or dimensional. Dimensional tape is thicker, and is of particular use to retail and signage uses where it can be used to allow signs or displays to stand out with a 3-D effect.
Constructive Bonding TapesACX Plus – Constructive bonding is a key element in every industry. High-tech materials with special properties & dissimilar materials can be bonded. The traditional use of rivets, welds or screws can damage the material; in such cases ACX Plus is highly recommended.They with stand very low & high temperature, water, UV light and some chemicals.
ACX Plus is characterized by:
Bonding Power Stress Dissipation Temperature & Weather Resistance
7055
Bonding of transparent and translucent materials
Due to the transparency it is suitable to apply on Glass or clear Acrylic/Polycarbonate sheets.
Size: 12mm x 25m & 19mm x 25m
Thickness: 1mm
7063
Bonding of hard-to-bond materials
Bonding between powder coated/plastic materials or metal–metal bonding.
Size: 12mm x 25m & 19mm x 25m
Thickness: 0.8mm
7074
Bonding of panels and reinforcement bars
Suitable for outdoors. For bonding between powder coated/plastic materials or metal–metal bonding.
Size: 12mm x 25m, 19mm x 25m & 25mm x 25m
Thickness: 1mm
“ACX Plus is an alternative to the traditional mechanical fastening methods & offer substantial advantages”
Industrial Bonding TapesTransparent double-sided self-adhesive tape consisting of a PET backing and a tackyfied acrylic adhesive.For Bonding ABS, Rubber/EPDM profiles, mouldings- Furniture industry/Battery packs/Lens/Touch screens in electronic devices. Reliable bond even to LSE substrates. It's a solvent acrylic polyester tape with a temperature range of 100°C long term & 200°C short term.
Foam Tape Bonding Excellent humidity resistance, shock absorption during transport and in daily use.
4965
Permanent double sided transparent polyester tape is suitable for indoor and outdoor use.
Temp: 100°C long term & 200°C short term.Thickness: 205µm
Size: 12mm x 50m, 19mm x 50m, 25mm x 50m & 50mm x 50m
4967
Transparent, double sided, self-adhesive tape consisting of a PET film backing and a modified acrylic adhesive.
Temp: 100°C long term & 200°C short term.
Thickness: 160µm.
Size: 12mm x 50m,19mm x 50m,25mm x 50m& 50mm x 50m
4982
Double-sided strong lamination filmic tape.
An economy version of double side tape. Good bonding strength to most common, smooth & evensubstrates.
Temp: 100°C long term & 200°C short term.
Thickness: 100µm
Size: 12mm x 50m,19mm x 50m,25mm x 50m& 50mm x 50mt
Applications
4970
Double-sided filmic tape with high adhesion. It is a thick white double-sided self-adhesive tape consisting of a PVC-film backing and a tackified acrylic adhesive. High coating weight for good bonding performance on rough or dusty surfaces.Full suitability for long-term applications.
Temp: 60°C long term & 70°C short term. Thickness: 240µm
Applications: Mounting of plastic and wooden trims Mounting of decorative POS materials and displays Mounting of signs and scalest
62932
Double-sided PE foam tape for constructive mounting. It offers an excellent long-term adhesive performance for demanding constructive applications at a small design gap.
Temp: 80°C long term & 80°C short term. Thickness: 500µm
Applications:Decorative aluminium cover screens on brown goodsDoor handles in kitchen furnitureMoulded decorative profiles for refrigerators or freezersGlass and mirror panels
4957
Double-sided general purpose PE-foam tape. Tesa 4957 is a double-sided tape consisting of a very conformable closed cell PE-foam backing and a shear resistant modified acrylic adhesive. It is fully suitable for outdoor use and is available in black and white.
Temp: 80°C long term & 80°C short term. Thickness: 1100µm
Applications:POS displays, exhibition sample displaysShelf edge labels, Cable channels, window and kitchen profilesDecorative glass or mirrorelements on furnitureSigns & Emblems
51570
Double-sided non-woven tape. It is used for permanent mounting of metal and plastic materials, e.g. aluminum, polystyrene, polypropylene, ABS. The thick layer of adhesive bonds well on uneven surfaces and has a very high initial bond. Thickness: 110µm
Temp: 40°C long term & 80°C short term. Applications: General purpose mounting.
Non Wowen Tapes
Adhesive Spray
60021
Is very versatile glue for permanently bonding materials such as paper, card-board, felt, fabric, film, wood, leather, polystyrene and manydifferent plastics.
Adhesive Spray Remover
60042
Is a spray for easy removal of glue residue from plastic parts, glass and metal surfaces. Spray reaches even concealed and hard to reach places Free from silicone.
SPRAY
50
0 m
l2
00
ml
UAE Customer Support # 800 RHINE(74463) Locations: UAE - Saudi Arabia - Oman
4959
Double-sided non-woven tape. It is a double-sided mounting and splicing tape, equipped with a non-woven backing and coated with an acrylic adhesive of high tack and good shear strength. It is UV and age-resistant as well as largely resistant to plasticizers.
Temp: 80°C long term & 200°C short term. Thickness: 100µm
Applications: Mounting signs, covers and nameplates Mounting door linings in the car industry Mounting plastic bags, dispatch bags, continuous stationery, posters, splicing paper and film webs
Technical Features
Issue 26 November 2013
7Issue 26 November 2013
P.O. Box No: 27402, Dubai, UAE. Tel: + 971-4 -2664647. Fax: + 971- 4-2628853. E mail: [email protected] www.bluerhine.com
We look forward to hearing from you
7
Solid Pure Acrylic
200°C
100°C
24 N/cm
10 N/cm
Product
Construction
Short-term temperatureresistance [minutes]*
Long-term temperature resistance[weeks]*
Adhesion to steel[after3days]
Adhesion to ABS[after 3 days]
Foamed Pure Acrylic
220°C
120°C
30 N/cm
8 N/cm
Foamed Modified Acrylic
170°C
70°C
35 N/cm
30 N/cm
*According to tesa test method Note: The technical information and data mentioned above, should be considered representative or typical for aproduct design of 1000µm only and should not be used for specification purposes.
Tesa® ACXplus 7055High Transparency
Tesa® ACXplus 7063High Adhesion
Tesa® ACXplus 7074High Resistance
BRIGHT TIMESIn this issue
TESA
Dear Friends,
In this issue we are proud to announce the addition of Tesa brand of tapes to the Blue Rhine range. Tesa is the world-wide leader in high performance tapes. Today their products are well-hidden within in many key products used in our daily life, Tesa tapes are used to hold together electrical cables, panels and even logos on cars. Tesa double-side tapes hold together critical components within a majority of today's smartphones and tablets.
The range of products from Tesa that we will carry are best suited to the signage and construction industry. Depending on the application we can guide you to choose the right product for your projects. The ACX range of tapes have been developed using some of the most advanced adhesive technology known today.
You may be familiar with the many red tapes available in the market today. The original killer red tape is a invention of Tesa, which was then later widely copied due to its success. The 4965 tape also referred to as the killer tape, it is the industry leader in terms of performance and market share for an all-purpose double side tape. If you have never used Tesa, we hope you will test them for your next project. Regards,
Anand JosephGeneral Manager+971 50 [email protected]
DOUBLE-SIDED TAPE is a pressure sensitive tape that is coated with adhesive on both sides. It is designed to stick two surfaces together, often in a way which is not visible in the end product, due to it being in between the objects rather than overlaying them. This allows for neater looking projects and better craftsmanship. Double sided tape can be either thin or dimensional. Dimensional tape is thicker, and is of particular use to retail and signage uses where it can be used to allow signs or displays to stand out with a 3-D effect.
Constructive Bonding TapesACX Plus – Constructive bonding is a key element in every industry. High-tech materials with special properties & dissimilar materials can be bonded. The traditional use of rivets, welds or screws can damage the material; in such cases ACX Plus is highly recommended.They with stand very low & high temperature, water, UV light and some chemicals.
ACX Plus is characterized by:
Bonding Power Stress Dissipation Temperature & Weather Resistance
7055
Bonding of transparent and translucent materials
Due to the transparency it is suitable to apply on Glass or clear Acrylic/Polycarbonate sheets.
Size: 12mm x 25m & 19mm x 25m
Thickness: 1mm
7063
Bonding of hard-to-bond materials
Bonding between powder coated/plastic materials or metal–metal bonding.
Size: 12mm x 25m & 19mm x 25m
Thickness: 0.8mm
7074
Bonding of panels and reinforcement bars
Suitable for outdoors. For bonding between powder coated/plastic materials or metal–metal bonding.
Size: 12mm x 25m, 19mm x 25m & 25mm x 25m
Thickness: 1mm
“ACX Plus is an alternative to the traditional mechanical fastening methods & offer substantial advantages”
Industrial Bonding TapesTransparent double-sided self-adhesive tape consisting of a PET backing and a tackyfied acrylic adhesive.For Bonding ABS, Rubber/EPDM profiles, mouldings- Furniture industry/Battery packs/Lens/Touch screens in electronic devices. Reliable bond even to LSE substrates. It's a solvent acrylic polyester tape with a temperature range of 100°C long term & 200°C short term.
Foam Tape Bonding Excellent humidity resistance, shock absorption during transport and in daily use.
4965
Permanent double sided transparent polyester tape is suitable for indoor and outdoor use.
Temp: 100°C long term & 200°C short term.Thickness: 205µm
Size: 12mm x 50m, 19mm x 50m, 25mm x 50m & 50mm x 50m
4967
Transparent, double sided, self-adhesive tape consisting of a PET film backing and a modified acrylic adhesive.
Temp: 100°C long term & 200°C short term.
Thickness: 160µm.
Size: 12mm x 50m,19mm x 50m,25mm x 50m& 50mm x 50m
4982
Double-sided strong lamination filmic tape.
An economy version of double side tape. Good bonding strength to most common, smooth & evensubstrates.
Temp: 100°C long term & 200°C short term.
Thickness: 100µm
Size: 12mm x 50m,19mm x 50m,25mm x 50m& 50mm x 50mt
Applications
4970
Double-sided filmic tape with high adhesion. It is a thick white double-sided self-adhesive tape consisting of a PVC-film backing and a tackified acrylic adhesive. High coating weight for good bonding performance on rough or dusty surfaces.Full suitability for long-term applications.
Temp: 60°C long term & 70°C short term. Thickness: 240µm
Applications: Mounting of plastic and wooden trims Mounting of decorative POS materials and displays Mounting of signs and scalest
62932
Double-sided PE foam tape for constructive mounting. It offers an excellent long-term adhesive performance for demanding constructive applications at a small design gap.
Temp: 80°C long term & 80°C short term. Thickness: 500µm
Applications:Decorative aluminium cover screens on brown goodsDoor handles in kitchen furnitureMoulded decorative profiles for refrigerators or freezersGlass and mirror panels
4957
Double-sided general purpose PE-foam tape. Tesa 4957 is a double-sided tape consisting of a very conformable closed cell PE-foam backing and a shear resistant modified acrylic adhesive. It is fully suitable for outdoor use and is available in black and white.
Temp: 80°C long term & 80°C short term. Thickness: 1100µm
Applications:POS displays, exhibition sample displaysShelf edge labels, Cable channels, window and kitchen profilesDecorative glass or mirrorelements on furnitureSigns & Emblems
51570
Double-sided non-woven tape. It is used for permanent mounting of metal and plastic materials, e.g. aluminum, polystyrene, polypropylene, ABS. The thick layer of adhesive bonds well on uneven surfaces and has a very high initial bond. Thickness: 110µm
Temp: 40°C long term & 80°C short term. Applications: General purpose mounting.
Non Wowen Tapes
Adhesive Spray
60021
Is very versatile glue for permanently bonding materials such as paper, card-board, felt, fabric, film, wood, leather, polystyrene and manydifferent plastics.
Adhesive Spray Remover
60042
Is a spray for easy removal of glue residue from plastic parts, glass and metal surfaces. Spray reaches even concealed and hard to reach places Free from silicone.
SPRAY
50
0 m
l2
00
ml
UAE Customer Support # 800 RHINE(74463) Locations: UAE - Saudi Arabia - Oman
4959
Double-sided non-woven tape. It is a double-sided mounting and splicing tape, equipped with a non-woven backing and coated with an acrylic adhesive of high tack and good shear strength. It is UV and age-resistant as well as largely resistant to plasticizers.
Temp: 80°C long term & 200°C short term. Thickness: 100µm
Applications: Mounting signs, covers and nameplates Mounting door linings in the car industry Mounting plastic bags, dispatch bags, continuous stationery, posters, splicing paper and film webs
Technical Features
Issue 26 November 2013
7Issue 26 November 2013
P.O. Box No: 27402, Dubai, UAE. Tel: + 971-4 -2664647. Fax: + 971- 4-2628853. E mail: [email protected] www.bluerhine.com
We look forward to hearing from you
7
Solid Pure Acrylic
200°C
100°C
24 N/cm
10 N/cm
Product
Construction
Short-term temperatureresistance [minutes]*
Long-term temperature resistance[weeks]*
Adhesion to steel[after3days]
Adhesion to ABS[after 3 days]
Foamed Pure Acrylic
220°C
120°C
30 N/cm
8 N/cm
Foamed Modified Acrylic
170°C
70°C
35 N/cm
30 N/cm
*According to tesa test method Note: The technical information and data mentioned above, should be considered representative or typical for aproduct design of 1000µm only and should not be used for specification purposes.
Tesa® ACXplus 7055High Transparency
Tesa® ACXplus 7063High Adhesion
Tesa® ACXplus 7074High Resistance
BRIGHT TIMESIn this issue
TESA
Dear Friends,
In this issue we are proud to announce the addition of Tesa brand of tapes to the Blue Rhine range. Tesa is the world-wide leader in high performance tapes. Today their products are well-hidden within in many key products used in our daily life, Tesa tapes are used to hold together electrical cables, panels and even logos on cars. Tesa double-side tapes hold together critical components within a majority of today's smartphones and tablets.
The range of products from Tesa that we will carry are best suited to the signage and construction industry. Depending on the application we can guide you to choose the right product for your projects. The ACX range of tapes have been developed using some of the most advanced adhesive technology known today.
You may be familiar with the many red tapes available in the market today. The original killer red tape is a invention of Tesa, which was then later widely copied due to its success. The 4965 tape also referred to as the killer tape, it is the industry leader in terms of performance and market share for an all-purpose double side tape. If you have never used Tesa, we hope you will test them for your next project. Regards,
Anand JosephGeneral Manager+971 50 [email protected]
DOUBLE-SIDED TAPE is a pressure sensitive tape that is coated with adhesive on both sides. It is designed to stick two surfaces together, often in a way which is not visible in the end product, due to it being in between the objects rather than overlaying them. This allows for neater looking projects and better craftsmanship. Double sided tape can be either thin or dimensional. Dimensional tape is thicker, and is of particular use to retail and signage uses where it can be used to allow signs or displays to stand out with a 3-D effect.
Constructive Bonding TapesACX Plus – Constructive bonding is a key element in every industry. High-tech materials with special properties & dissimilar materials can be bonded. The traditional use of rivets, welds or screws can damage the material; in such cases ACX Plus is highly recommended.They with stand very low & high temperature, water, UV light and some chemicals.
ACX Plus is characterized by:
Bonding Power Stress Dissipation Temperature & Weather Resistance
7055
Bonding of transparent and translucent materials
Due to the transparency it is suitable to apply on Glass or clear Acrylic/Polycarbonate sheets.
Size: 12mm x 25m & 19mm x 25m
Thickness: 1mm
7063
Bonding of hard-to-bond materials
Bonding between powder coated/plastic materials or metal–metal bonding.
Size: 12mm x 25m & 19mm x 25m
Thickness: 0.8mm
7074
Bonding of panels and reinforcement bars
Suitable for outdoors. For bonding between powder coated/plastic materials or metal–metal bonding.
Size: 12mm x 25m, 19mm x 25m & 25mm x 25m
Thickness: 1mm
“ACX Plus is an alternative to the traditional mechanical fastening methods & offer substantial advantages”
Industrial Bonding TapesTransparent double-sided self-adhesive tape consisting of a PET backing and a tackyfied acrylic adhesive.For Bonding ABS, Rubber/EPDM profiles, mouldings- Furniture industry/Battery packs/Lens/Touch screens in electronic devices. Reliable bond even to LSE substrates. It's a solvent acrylic polyester tape with a temperature range of 100°C long term & 200°C short term.
Foam Tape Bonding Excellent humidity resistance, shock absorption during transport and in daily use.
4965
Permanent double sided transparent polyester tape is suitable for indoor and outdoor use.
Temp: 100°C long term & 200°C short term.Thickness: 205µm
Size: 12mm x 50m, 19mm x 50m, 25mm x 50m & 50mm x 50m
4967
Transparent, double sided, self-adhesive tape consisting of a PET film backing and a modified acrylic adhesive.
Temp: 100°C long term & 200°C short term.
Thickness: 160µm.
Size: 12mm x 50m,19mm x 50m,25mm x 50m& 50mm x 50m
4982
Double-sided strong lamination filmic tape.
An economy version of double side tape. Good bonding strength to most common, smooth & evensubstrates.
Temp: 100°C long term & 200°C short term.
Thickness: 100µm
Size: 12mm x 50m,19mm x 50m,25mm x 50m& 50mm x 50mt
Applications
4970
Double-sided filmic tape with high adhesion. It is a thick white double-sided self-adhesive tape consisting of a PVC-film backing and a tackified acrylic adhesive. High coating weight for good bonding performance on rough or dusty surfaces.Full suitability for long-term applications.
Temp: 60°C long term & 70°C short term. Thickness: 240µm
Applications: Mounting of plastic and wooden trims Mounting of decorative POS materials and displays Mounting of signs and scalest
62932
Double-sided PE foam tape for constructive mounting. It offers an excellent long-term adhesive performance for demanding constructive applications at a small design gap.
Temp: 80°C long term & 80°C short term. Thickness: 500µm
Applications:Decorative aluminium cover screens on brown goodsDoor handles in kitchen furnitureMoulded decorative profiles for refrigerators or freezersGlass and mirror panels
4957
Double-sided general purpose PE-foam tape. Tesa 4957 is a double-sided tape consisting of a very conformable closed cell PE-foam backing and a shear resistant modified acrylic adhesive. It is fully suitable for outdoor use and is available in black and white.
Temp: 80°C long term & 80°C short term. Thickness: 1100µm
Applications:POS displays, exhibition sample displaysShelf edge labels, Cable channels, window and kitchen profilesDecorative glass or mirrorelements on furnitureSigns & Emblems
51570
Double-sided non-woven tape. It is used for permanent mounting of metal and plastic materials, e.g. aluminum, polystyrene, polypropylene, ABS. The thick layer of adhesive bonds well on uneven surfaces and has a very high initial bond. Thickness: 110µm
Temp: 40°C long term & 80°C short term. Applications: General purpose mounting.
Non Wowen Tapes
Adhesive Spray
60021
Is very versatile glue for permanently bonding materials such as paper, card-board, felt, fabric, film, wood, leather, polystyrene and manydifferent plastics.
Adhesive Spray Remover
60042
Is a spray for easy removal of glue residue from plastic parts, glass and metal surfaces. Spray reaches even concealed and hard to reach places Free from silicone.
SPRAY
50
0 m
l2
00
ml
UAE Customer Support # 800 RHINE(74463) Locations: UAE - Saudi Arabia - Oman
4959
Double-sided non-woven tape. It is a double-sided mounting and splicing tape, equipped with a non-woven backing and coated with an acrylic adhesive of high tack and good shear strength. It is UV and age-resistant as well as largely resistant to plasticizers.
Temp: 80°C long term & 200°C short term. Thickness: 100µm
Applications: Mounting signs, covers and nameplates Mounting door linings in the car industry Mounting plastic bags, dispatch bags, continuous stationery, posters, splicing paper and film webs
Technical Features
Issue 26 November 2013
7Issue 26 November 2013
P.O. Box No: 27402, Dubai, UAE. Tel: + 971-4 -2664647. Fax: + 971- 4-2628853. E mail: [email protected] www.bluerhine.com
We look forward to hearing from you
7
Solid Pure Acrylic
200°C
100°C
24 N/cm
10 N/cm
Product
Construction
Short-term temperatureresistance [minutes]*
Long-term temperature resistance[weeks]*
Adhesion to steel[after3days]
Adhesion to ABS[after 3 days]
Foamed Pure Acrylic
220°C
120°C
30 N/cm
8 N/cm
Foamed Modified Acrylic
170°C
70°C
35 N/cm
30 N/cm
*According to tesa test method Note: The technical information and data mentioned above, should be considered representative or typical for aproduct design of 1000µm only and should not be used for specification purposes.
Tesa® ACXplus 7055High Transparency
Tesa® ACXplus 7063High Adhesion
Tesa® ACXplus 7074High Resistance
