Brief Product Descriptions (PDF)

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries.

Imperial OilDownstream and Chemical 237 Fourth Avenue SW, Calgary, Alberta T2P 3M9

For more information: 1-888-968-3776

mobil.ca

mobildelvac.ca

mobilindustrial.com

Brief Product Descriptions 2015 Edition – Canada

TMTMTMTMTMTMTMTMTMTM

Brief P

rod

uct Descrip

tions 2015 E

ditio

n – Canad

aT

M

Prinect Printready ColorCarver

Page is color controlled with Prinect Printready ColorCarver 11.0.044 Copyright 2011 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no

2

Brief Product Descriptions2015 Edition

237 Fourth Avenue SW, Calgary, Alberta T2P 3M9

For additional information please call our Technical Support Centre at

1 888 968-3776 or visit mobil.ca

Due to ongoing product research and development, the information herein is subject to change without notification. Please refer to our Product Data Sheets found at mobil.ca/pds for the most current product information.

This book is provided as a field reference to our core product offer of lubricating oils, greases and coolants. The format is designed to help you choose precisely the right product for each application.

The content is divided into six sections:

Industrial

Commercial Vehicle

Passenger Vehicle

Marine

Aviation

Grease

Within each section, products are divided into application groups. An alphabetical list of applications is provided up front and an alphabetical index of products is located at the end. An appendix provides additional information.

Due to continual product development, these contents are subject to change without notification. Please refer to our Product Data Sheets found at mobil.ca/pds for the most current product information.

Typical Properties are typical of those obtained with normal product tolerance and do not constitute a specification. Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations.

All products may NOT be available locally.

For additional information please call our Technical Support Centre at 1 888 968-3776 or visit mobil.ca.

INTRODUCTION

1 Visit mobil.ca /pds for the most current product information

http://www.mobil.ca/pds

Imperial will repair or replace any piece of your equipment damaged due to the failure

of our lubricant.

All our lubricants meet or exceed original equipment manufacturers’ standards. We guarantee their performance when used in accordance with Imperial’s

recommendations, the equipment manufacturers’ performance specifications, and under normal operating conditions.

This warranty is in addition to any and all original equipment manufacturers’ warranties and does not invalidate them.

Because we are 100% committed to you, we stand behind our lubricants 100%.

See next page for complete warranty terms and conditions. For further information on the Imperial Ultimate Lubrication Warranty or any

Mobil lubricant call Imperial at 1 888 968-3776.

All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries. Limitation of liability: in no event shall Imperial Oil be liable for any incidental, indirect, special, exemplary, punitive or consequential damages, including loss of profits.

The Ultimate Lubrication Warranty

Pegasus

TM TMTM

Pegasus

TM TMTM

Pegasus

TM TMTM

2

The Ultimate Lubrication Warranty Terms and Conditions

What the Warranty Covers

Imperial provides this warranty to direct purchasers of Mobil™ lubricants, where such lubricants have been purchased from an authorized vendor. This warranty covers the Mobil product and critical equipment parts lubricated by that product directly damaged by a defect or malfunction of the lubricant. Imperial warrants that its lubricants are free from defects and that the lubricant you purchased will protect your equipment parts from oil related failure for three years, provided that:

• The equipment was in good operating condition at the time the lubricant was installed;

• The lubricant was selected and maintained in accordance with specifications of the original equipment manufacturer (“OEM”), and the written recommendations (which include product packaging) provided by Imperial at the time of sale; and

• The equipment has been operated within the limits specified by the OEM.

Be advised that if your equipment is covered by a manufacturer’s warranty, you should follow the equipment’s oil life sensor and the oil change interval recommended in your owner’s manual to avoid a disruption in the manufacturer’s warranty. Follow your owner’s manual if the equipment is operated in any of the following severe services: racing or commercial applications including taxis, limousines, etc.; frequent towing or hauling; extremely dusty or dirty conditions; or under excessive idling conditions.

What the Period of Coverage Is

The Ultimate Lubrication Warranty is valid for three (3) years from the date of purchase or installation, whichever comes first.

What We Will Do to Correct Problems

Imperial will replace any lubricant that is defective. In addition, Imperial will repair any equipment damage directly caused by a defect or malfunction of the lubricant, at no cost to you, provided that the lubricant was selected and maintained in accordance with specifications of the OEM and the written instructions (which includes product packaging) provided by Imperial. These are your exclusive remedies for any claim for defective lubricant.

What the Warranty Does Not Cover

This warranty excludes:

• Mobil lubricants used in mechanically deficient equipment, where the deficiency results from, but is not limited to: a previously existing condition, abnormal operation; negligence; abuse; damage from casualty, shipment or accident; or equipment modification done without written authorization from the OEM.

• Mobil lubricants used in equipment where the OEM required lubricant standards do not match those stated by Imperial, without prior written approval from Imperial.

• Mobil lubricants and/or equipment pieces that have been used in conjunction with any other product or additive that has not been authorized for use by Imperial.

• Failure of equipment due to non-lubricant related conditions, such as normal wear.

How You Can Get Service

To file a claim under this warranty, you must:

1. Within 48 hours from discovery of the damage (and not later than six (6) months from the date the damage occurred), call 1-888-968-3776 to communicate the issue, and initiate a claims investigation. You may also contact your Imperial or local Distributor representative.*

2. Provide proof of purchase and maintenance records showing that the equipment was serviced at the intervals recommended by the OEM.

3. Allow an Imperial representative to examine the equipment to determine the extent of the damage and to confirm that the lubricant was the cause.

4. Allow an Imperial representative to obtain an oil sample, if available, from the engine for oil analysis at no cost to you to assist in determining the cause of the equipment failure.

3

Introduction ....................................................................................................................... 1

Ultimate Lubrication Warranty ......................................................................................2-3

Health and Safety Precautions .....................................................................................5-7

Sustainability .................................................................................................................... 8

Energy Efficiency .............................................................................................................. 9

Application Index of Products .................................................................................. 10-11

Mobil SHC™ General Recommendations..................................................................... 12

Brief Product Descriptions ..................................................................................... 14-104

Appendices ............................................................................................................ 105-109

Temperature Conversion Table ................................................................................ 105-106

Viscosity Conversion Table ............................................................................................. 107

Viscosity - Temperature Chart ........................................................................................ 108

SAE Viscosity Grades for Engine Oils ............................................................................ 109

SAE J306 Viscosity Grades for Gear Oils....................................................................... 109

Classification of Greases by National Lubricating Grease Institute

(NLGI) Consistency Numbers ......................................................................................... 109

Understanding Oil Analysis ..............................................................................................110

ANSI-AGMA Industrial Gear Lubricants 9005-D94 .........................................................111

Alphabetical List of Products ................................................................................ 112-116

Viscosity Classification Equivalents ...........................................................................117

TABLE OF CONTENTS

4

QUESTIONS?CALL OUR TECHNICAL SUPPORT CENTER AT

1 888 968-3776

mobilindustrial.com | mobildelvac.ca | mobil.ca

Visit mobil.ca /pds for the most current product information


Workplace Hazardous MaterialsInformation System (WHMIS)

The Workplace Hazardous Materials Information System or WHMIS is designed to ensure that all employers obtain the information they need to inform and train their employees properly about hazardous materials used in the workplace.

WHMIS was developed through extensive consultation with industry and labour representatives and the federal, provincial and territorial governments. The goal of WHMIS is to reduce the incidence of illness and injuries resulting from the use of hazardous materials in the workplace. Through legislation, the WHMIS consensus establishes uniform requirements to ensure that the hazards of materials produced or sold in, imported into or used within workplaces in Canada are identified by suppliers and employers using standard classification criteria.

WHMIS provides employers and workers with one additional tool to improve their understanding of hazardous materials.To make the best use of this tool, suppliers and employers have certain responsibilities.

A ‘supplier’ is a manufacturer, processor or packager of a controlled product or a person who, in the course of business, imports or sells controlled products. A ‘controlled product’ is defined for WHMIS under the federal Hazardous Product Act as any product, material or substance specified by the regulations included in any of the classes listed in Table 1 (see page 6). An ‘employer’ is, for the purposes of WHMIS, the user of a controlled product in the workplace or the producer of a controlled product as part of a workplace process.

Suppliers must convey hazard information to purchasers in a specified manner by means of labelling of the controlled products or containers of the controlled products, and by providing more detailed information concerning the controlled product in the form of a Material Safety Data Sheet (MSDS).

Under occupational safety and health legislation, employers are also required to provide their employees with hazard information received from their suppliers with respect to controlled products used or produced in the workplace, by means of appropriate workplace labels, by distributing MSDS and by providing worker education on the safe use of hazardous materials.

WHMIS is designed to ensure that all employers receive the information they need to educate and train their employees properly in the use of hazardous materials in the workplace. It will also provide employees with necessary hazard information so they can participate in, and support, the precautionary measures instituted in their workplaces.

As a supplier of petrochemical products in Canada, Imperial Oil has issued material safety data sheets for all Imperial Oil products and prepared labels that comply with WHMIS for all controlled products. Controlled products can be easily identified because of the special WHMIS supplier label. Material Safety Data Sheets should be consulted prior to handling a product to ascertain whether there are any specific health and safety risks or special handling requirements that should be addressed. Imperial Oil will continue to investigate the potentially hazardous properties of existing and new materials through extensive testing and research programs.

HEALTH AND SAFETY PRECAUTIONS



Material Safety Data Sheets

What kind of information does an MSDS provide?

An MSDS typically contains the following types of information:

• Physical data on the product (e.g. viscosity, flash point)

• The nature and degree of health, environmental and safety hazards associated with the product

• Precautionary guidelines for proper and safe handling of the product in order to avoid fire, explosion and acute and chronic health hazards

• Emergency procedures in the event of fire, spill or excessive exposure to the product by skin contact, ingestion or inhalation

Imperial Oil customers in Canada can obtain Material Safety Data Sheets (MSDS) and Workplace Hazardous Materials Information System (WHMIS) information, in English or French, for all products.

Through the customer-establishment process, customers of WHMIS-controlled products will receive a Material Safety Data Sheet (MSDS) on or before first shipment of the controlled product. Subsequent updates to that sheet are directed to the identified customer contact.

MSDS are also available through any of the following options:

• Visit our website at www.imperialoil.ca/msds.

• Use our automated ‘FAX-BACK’ system: call 1-800-IOL-MSDS or 1-800-465-6737. Please have your fax number available.

• Call 1-888-968-3776 to speak to a customer service representative.

• Contact your Imperial sales representative

In addition, our technical sales representatives can assist in providing information on the safe storage and use of Imperial Oil products. Special customer requests will be directed to our industrial hygiene/product safety department.

Product Handling

Most lubricating oils and greases are not controlled under WHMIS legislation in Canada. However, certain basic handling procedures should be observed to keep the petroleum products off the skin and to avoid inhalation of their vapours and mists. The following guidelines apply to the handling of all petroleum products and in general to other chemicals with which you may come in contact.

Always remember to:

• Minimize skin contact with whatever product you are using.

• Remove oils from the skin promptly, using mild non-abrasive soap and warm water or a skin cleanser and warm water.

• Do not use gasoline, solvents, kerosene or similar products to remove oil or grease from the skin.

• Do not wear oil-soaked clothing. Launder all work clothes frequently. Put oily rags in the correct container. Discard oil-soaked shoes and belts.

• Wash hands and face thoroughly before eating and at the end of a shift. Take a shower if possible before leaving work.

• Clean up spilled product promptly and dispose of it correctly. Keep product out of sewers and waterways.

• Get first aid for all cuts and scrapes and report as required.

• Avoid inhalation of oil mist and solvent vapours.

• Obtain medical advice on all potential health-hazard problems.

One of the least recognized, yet most serious, workplace hazards is a punctured oil line under pressure. When a jet of pressurized fluid makes contact with the skin, it can enter the body and cause serious injury. That is why, under absolutely NO circumstances, should you try to stop a hydraulic oil leak with your finger. Always be aware of the risk when you’re working near hydraulic equipment and if your skin is struck by pressurized fluid, seek medical attention immediately.


6Visit mobil.ca /pds for the most current product information



Table 1 – WHMIS Class and Division Hazard Symbols

CLASS AND DIVISION DESIGNATION SYMBOL

CLASS A – Compressed Gas

CLASS B – Flammable and Combustible Material

Flammable Gas Flammable Liquid Combustible Liquid Flammable Solid Flammable Aerosol Reactive Flammable Material

CLASS C – Oxidizing Material

CLASS D – Poisonous and Infectious Material

1. Material causing immediate and serious toxic effect

2. Material causing other toxic effects

3. Biohazardous infectious material

CLASS E – Corrosive Material

CLASS F – Dangerously Reactive Material



SUSTAINABILITY

8

*

* Visit mobilindustrial.com to learn how certain Mobil-branded lubricants may provide benefits to help minimize environmental impact.

Actual benefits will depend upon product selected, operating conditions, and applications.


The three pillars of Advancing Productivity serve as part of our corporate commitment to sustainability. At ExxonMobil, “sustainability” means balancing economic growth, social development and environmental protection so that future generations are not compromised by actions taken today.

To put sustainability in motion, we take a holistic approach across our offer, communication and process, providing innovative lubricants and services that can create tangible value for you in the areas of safety, environmental care and productivity. Through Advancing Productivity, our goal is to deliver performancebene�ts in these three crucial areas of your business so that you can achieve your full vision of success.

Safety Environmental Care Productivity

Minimizing employee – equipment interactionWe offer products and services

that can help you mitigate potential

employee injury caused by direct

contact with equipment. These

products and services are designed

to help:

• Provide long drain intervals and

enhance equipment reliability,

minimizing maintenance, repair

and replacement

• Reduce the potential for leaks

that arise from handling used oil

and related products

• Increase employee safety

awareness and knowledge of a

lubricant’s effect on health

and safety

• Address the risk of potential

product misapplication

Designed to help lighten environmental touchOur commitment to minimizing

environmental impact has led us

to create technologically advanced

products and innovative services with

that goal in mind. We strive to help

you achieve this goal through:

• Optimized oil drain intervals, which

can help reduce used oil volume

and product packaging, as well as

service-related risks

• Long component life, to help reduce

worn equipment disposal and

maintenance-related waste

• Potential GHG emissions reduction

and other energy-efficiency benefits

Controlling costly downtime and delaysEnhancing the competitive potential

of our customers is an important

part of Advancing Productivity.

We achieve this objective through

lubrication solutions that can

help provide:

• Long drain intervals, which can

help improve equipment availability,

reduce lubricant transaction

frequency and minimize

disposal costs

• Powerful equipment protection,

which can maximize equipment

availability, helping you control

costs of equipment maintenance

and replacement

• Inventory consolidation potential


ENERGY EFFICIENCY

9

About the Energy Efficiency Seal

As the supplier of Mobil™ Industrial Lubricants, we are committed to providing products and services that help deliver tangible performance and sustainability-related benefits – as well as material economic advantages – to Canadian industry and consumers.

Our extensive range of high performance lubricants can help increase equipment operating efficiency and engine fuel economy. These lubricants can also contribute to reduced energy and resource use, lower emissions, and cost savings for industrial equipment.

The Energy Efficiency Seal is the typographic repre-sentation for all Mobil Industrial Lubricants that meet the rigorous criteria for outstanding energy efficiency.

These criteria are determined on a case-by-case basis and are dependent on the product category and applica-tion. Statistically valid data must be available to sub-stantiate the energy efficiency claim and demonstrate a statistically significant decrease in energy consumption or increase in efficiency when compared with commercially available products designed for the same application.

Mobil SHC™ 600Mobil SHC Cibus™

Energy efficiency relates solely to the fluid performance when compared to conventional (mineral) Mobil SHC Cibus™ reference oils of the same viscosity grade in circulating and gear applications. The technology allows an increase in fuel efficiency of up to 3.6 percent compared to the reference oil when tested in a worm gearbox under controlled conditions. Efficiency improvements will vary based on operating conditions and application.

Mobil SHC™ Gear Energy efficiency relates solely to the fluid performance when compared with conventional reference (150-1000) oils of the same viscosity grade in gear applications. The technology used allows an increase in fuel efficiency of up to 3.6 percent compared with the reference oil when tested in a worm gearbox under controlled conditions. Efficiency improvements will vary based on operating conditions and applications.

Energy efficiency relates solely to the fluid performance when compared with Mobil DTE 10 Excel™ standard hydraulic fluids. The technology allows an increase in hydraulic pump efficiency of up to 6 percent compared with Mobil DTE 20 Series when tested in standard hydraulic applications. The energy efficiency claim for this product is based on test results conducted in accordance with applicable industry standards and protocols.

Mobil SHC™ 500 Mobil DTE 10 Excel™

Mobil SHC Pegasus™ The energy efficiency of Mobil SHC Pegasus relates solely to the fluid performance when compared to standard Mobil SAE 40 natural gas engine oils. Mobil SHC Pegasus technology demonstrated an increase in fuel efficiency of up to 1.5 percent, compared to Mobil Pegasus 1005 and 805 series when tested in standard natural gas engine applications under controlled conditions. Efficiency improvements will vary based on operating conditions and applications. The energy efficiency claim for this product is based on test results on the use of the fluid conducted in accordance with applicable industry standards and protocols.

Below are the Mobil Industrial Lubricants products in which this technology is available:

The above products provide energy efficiency benefits when compared with standard products of the same category and application, helping our customers to operate their equipment more efficiently.



10

APPLICATION INDEX OF PRODUCTS

INDUSTRIAL LUBRICANTS

Chain Oils ...................................................................................................................18

Circulating Oils ......................................................................................................19-20

Compressor Oils .................................................................................................... 21-24

Cylinder Oils ...............................................................................................................25

Food Industry Lubricants .......................................................................................26-27

Gas Engine Oils .....................................................................................................28-32

Gear Oils – Enclosed Gears ..................................................................................33-34

Gear Oils – Enclosed Gears Specialty ..................................................................35-36

Gear Oils – Open Gears .............................................................................................36

Heat Transfer Fluids ....................................................................................................37

Hydraulic Fluids ..................................................................................................... 37-40

Hydraulic Fluids – Less Flammable ............................................................................41

Metalworking Fluids ...............................................................................................42-43

Mist Oils ......................................................................................................................44

Other Industrial Oils ...............................................................................................45-46

Paper Machine Oils ....................................................................................................47

Pneumatic Tool Lubricant ...........................................................................................48

Quench Oils ................................................................................................................48

Refrigeration Oils ........................................................................................................49

Rust Preventive ...........................................................................................................50

Spindle Oils ................................................................................................................51

Transformer Oils .........................................................................................................51

Turbine Oils ............................................................................................................52-54

Way Oils .....................................................................................................................55

COMMERCIAL VEHICLE LUBRICANTS

Heavy Duty Diesel Engine Oils ..............................................................................60-62

Heavy Duty Natural Gas Engine Oils .........................................................................62

Heavy Duty Power Transmission Fluids ...........................................................63, 66-67

Tractor Hydraulic Fluids ..............................................................................................68

Railway .......................................................................................................................68

Coolant/Antifreeze .....................................................................................................69



APPLICATION INDEX OF PRODUCTS

11

PASSENGER VEHICLE LUBRICANTS

Passenger Vehicle Engine Oils .................................................................................74-76

Passenger Vehicle Drive Train Fluids ........................................................................77-78

Motorcycle Oils ............................................................................................................ 78

Passenger Vehicle Installer Greases ............................................................................ 78

MARINE LUBRICANTS

Crosshead Engine Oils ................................................................................................. 81

Trunk Piston Engine Oil ................................................................................................ 82

Marine Hydraulic Oil ..................................................................................................... 83

Marine Grease .............................................................................................................. 83

AVIATION LUBRICANTS

Grease ..................................................................................................................... 85-86

Jet Oil ........................................................................................................................... 86

GREASES

Automotive .................................................................................................................... 91

Couplings ...................................................................................................................... 92

Electric Motors .............................................................................................................. 93

Environmentally Aware ................................................................................................. 93

Food Industry (NSF H-1) .............................................................................................. 94

Gears – Enclosed, Semi-Fluid ...................................................................................... 94

Gears – Open ............................................................................................................... 95

High Temperature – Clay Thickened ............................................................................. 96

Marine .......................................................................................................................... 96

Multi-Purpose ...........................................................................................................97-99

Off-Highway Heavy Duty Equipment and On-Highway Trucking ..................................100

Paper Machines ...........................................................................................................101

Pneumatic Tools ..........................................................................................................101

Railway ........................................................................................................................102

Drilling..........................................................................................................................102

Specialty Synthetic ......................................................................................................103

Threads ................................................................................................................103-104

Wind Turbine ................................................................................................................104

Wire Ropes ..................................................................................................................104



MOBIL SHC GENERAL RECOMMENDATIONS

12

Productivity That’s Proven

What truly sets Mobil SHC™ synthetic lubricants apart from its competitors is its track record. It represents Productivity That’s Proven – the underlying claim behind our brand. No other synthetic lubricant has the experience, the proof, and the reputation to match it.

The full – and unmatched – suite of products that carry the Mobil SHC name have been tried, tested and proven in almost every type of equipment, under almost every condition.

Mobil SHC General Recommendations:

Circulating Mobil SHC 600™ Series Mobil Glygoyle™ Numbered Series

Compressors Mobil Rarus SHC™ 1020 Series (rotary screw and vane) Mobil Rarus™ 800 Series (reciprocating)

Food Industry (NSF H-1) Mobil SHC Polyrex™ Grease Series

Gas Engine Mobil SHC Pegasus™ 30 Mobil Pegasus™ 1

Gear Mobil SHC 600™ Series Mobil SHC Gear™ Series Mobilgear SHC™ XMP Series (wind turbines)

Hydraulics Mobil SHC™ 500 Series Mobil EAL Envirosyn™ H Series

Paper Machine Mobil SHC™ PM Series Mobilith SHC™ PM Grease Series

Turbine Mobil SHC™ 800 Series

Grease Mobilith SHC™ Series (multi-purpose) Mobil SHC Polyrex™ Series (Food/NSF H-1, high temperature) Mobil SHC™ PF 462 (extreme high temperature) Mobil SHC™ Grease 460 WT (wind turbines) Mobiltemp SHC™ 32 (high speed) Mobil SHC™ Grease 100 EAL Series (environmentally aware) Mobilith SHC™ PM Series (paper machine)




1 888 968-3776


IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES14

INDUSTRIAL PRODUCT LISTING BY APPLICATION

OIL APPLICATION PRODUCT PAGE Chain Oils Millcot™ K ................................................................................18

Mobil™ Chainoil .......................................................................18

Mobil™ Heavy Duty (HD) Chainoil ...........................................18

Circulating Oils Mobil SHC™ 600 Series ..........................................................19

Mobil Glygoyle™ Numbered Series .........................................19

Mobil Vacuoline™ 500 Series ..................................................19

Mobil DTE™ Oil Named Series .............................................. 20

Mobil Teresstic™-C ................................................................. 20

Mobil Teresstic™ V 150 ........................................................... 20

Compressor Oils Mobil Rarus SHC™ 1020 Series ............................................ 21

Mobil Rarus™ 800 Series ....................................................... 21

Mobil Rarus™ 427 .................................................................. 21

Exxcolub™ SCF PG ............................................................... 22

Exxcolub™ SCF PS ................................................................ 22

Exxcolub™ SCF M2 ................................................................ 22

Exxcolub™ Application Chart ................................................. 23

Mobil™ Compressor Oils ........................................................ 24

Mobil™ Compressor Oils 264 and 460 ................................... 24

Mobil™ Compressor Oil N 100 ............................................... 24

Mobil Teresstic™ AC 32 .......................................................... 24

Cylinder Oils Mobil™ Cylinder Oils .............................................................. 25

Mobil DTE™ Oil 205 ............................................................... 25

Food Industry Lubricants Mobil™ Food and Beverage Industry Selector ....................... 26

Mobil SHC Cibus™ Series ...................................................... 27

Mobil DTE™ FM Series .......................................................... 27



15


OIL APPLICATION PRODUCT PAGE

Gas Engine Oils Engine Oil Selection Chart...................................................... 28

Mobil SHC Pegasus™ 30 ....................................................... 29

Mobil Pegasus™ 1 .................................................................. 29

Mobil Pegasus™ GMA ............................................................ 29

Mobil Pegasus™ 805 .............................................................. 29

Mobil Pegasus™ GLX ............................................................. 30

Mobil Pegasus™ 710 .............................................................. 30

Mobil Pegasus™ 610 .............................................................. 30

Mobil Pegasus™ 605 .............................................................. 31

Mobil Pegasus™ 801 Series ................................................... 31

Mobil Pegasus™ AGX ............................................................. 31

Engine Oil Selector ................................................................. 32

.........................................................................................Gear Oils – Enclosed Gears Mobil SHC Gear™ Series (ISO VG 150-1000) ........................ 33

Mobil SHC Gear™ 1500, 3200, and 6800 ............................... 33

Mobilgear™ 600 XP Series ..................................................... 34

SPARTAN™ EP-C ................................................................... 34

Gear Oils – Enclosed Gears Specialty Mobil SHC™ Gear OH Series ................................................. 35

Mobilgear SHC™ XMP Series ................................................ 35

Mobil Glygoyle™ Series .......................................................... 35

Mobil Iogear™ EP 100 ............................................................ 36

Gear Oils – Open Gears Mobil SHC Gear™ 46M........................................................... 36

Mobiltac™ 375 NC .................................................................. 36

Mobil Geargard™ HVS ............................................................ 36

Heat Transfer Fluids Mobiltherm™ and Thermoil™ ................................................. 37

Visit mobil.ca /pds for the most current product information Click Here to return to PRODUCT APPLICATION INDEX


IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES16



Hydraulic Fluids Mobil SHC™ 500 Series ......................................................... 37

Mobil DTE 10 Excel™ Series .................................................. 37

Mobil DTE™ 20 Series ............................................................ 38

Mobil Univis™ Ultra ................................................................. 38

Mobil Univis™ Extra ................................................................ 38

Mobil Univis™ N-C Series ....................................................... 39

Mobil Univis™ HVI 13 ............................................................. 39

Mobil Univis™ BIO-C 40 ......................................................... 39

Mobil Nuto™ H Series ............................................................. 40

Forum™ EP 46 and 68 ............................................................ 40

Hydraulic Fluids – Less Flammable Mobil Nyvac™ FR 200D .......................................................... 41

Mobil Pyrogard™ 53 ................................................................ 41

Metalworking Fluids Mobilmet™ 420 Series ............................................................ 42

Mobilmet™ 760 Series ............................................................ 42

Mobilcut™ 100......................................................................... 42

Mobilcut™ 140 ........................................................................ 43

Mobilcut™ 350 ........................................................................ 43

Formesso™ Summer Grade ................................................... 43

Mist Oils Mobilgear™ MS Series ........................................................... 44

Other Industrial Oils Canthus™ 680 ........................................................................ 45

Faxam™ .................................................................................. 45

Mobil™ Sawguide Oils ............................................................ 45

Mobil™ Synthetic Oven Lube 1090 ......................................... 46

Mobil Synturion™ 6 ................................................................. 46

Mobil™ System Cleaner .......................................................... 46

Slurry Oil 62 ............................................................................ 46



17



Paper Machine Oils Mobil SHC™ PM Series .......................................................... 47

Mobil DTE™ PM Series .......................................................... 47

Pneumatic Tool Oils Mobil Arox™ EP Series ........................................................... 48

Quench Oils Mobil Fenso™ Series .............................................................. 48

Refrigeration Oils Mobil Glygoyle™ 22 ................................................................ 49

Mobil Gargoyle™ Arctic Oils .................................................... 49

Mobil Gargoyle Arctic SHC™ 200 Series ................................ 49

Mobil Zerice™ S Oils .............................................................. 49

Rust Preventive Mobilarma™ 245 ..................................................................... 50

Mobilarma™ 700 Series .......................................................... 50

Mobil Vaprotec™ Light ............................................................ 50

Spindle Oils Mobil Velocite™ Oil Numbered Series .................................... 51

Transformer Oils Voltesso™ ............................................................................... 51

Turbine Oils Mobil SHC™ 800 Series ......................................................... 52

Mobil DTE™ 932 GT ............................................................... 52

Mobil DTE™ 800 Series .......................................................... 52

Mobil DTE™ 724 Oil................................................................ 53

Mobil DTE™ 732 Oil................................................................ 53

Mobil DTE™ 700 Series .......................................................... 53

Mobil Teresso™ ....................................................................... 54

Mobil Teresso™ GTC Series ................................................... 54

Way Oils Mobil Vactra™ Oil Numbered Series ....................................... 55

Mobil Vacuoline™ 1400 Series ................................................ 55



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES18

Viscosity, ASTM D445

Approximate cSt at cSt at Pour Point, Flash Point Product ISO VG SAE Grade 40°C 100°C °C, ASTM D97 °C, ASTM D92

Millcot K 68 68 20 65.4 8.1 -24 196Millcot K 100 100 30 105 11.1 -12 202Millcot K 220 220 50 209 17.3 -3 238

Viscosity, ASTM D445 Pour Point Flash PointProduct cSt at 40°C °C, ASTM D97 °C, ASTM D92

Mobil Chainoil Light 40 -33 180Mobil Chainoil Heavy 150 -20 190

Viscosity, ASTM D445 Pour Point Flash PointProduct cSt at 40°C °C, ASTM D97 °C, ASTM D92

Mobil Heavy Duty Chainoil 220 -15 260

INDUSTRIAL LUBRICANTSCHAIN OILS

Millcot™ K. Tacky, anti-spattering, general purpose oils, originally developed for textile machinery and well suited for a wide range of thin film applications in general manufacturing. Ideal for lumber industry applications, such as chains and hand oiled bearings

in sawmills and lead screws on plywood veneer lathes. Millcot K oils are fortified with rust inhibitors and anti-wear additives and can be applied using most lubrication methods.

Mobil™ Chainoil delivers excellent chain and bar lubrication in residential and industrial chain saw applications. A tacky stay-in-place film of oil lubricates, cleans and cools moving parts, helping to extend bar and chain life. Mobil Chainoil Heavy is recommended

for moderate temperatures (-10°C to 30°C), Mobil Chainoil Light for lower temperatures down to -30°C. Also recommended for industrial chain drive and plain bearing applications requiring a tacky anti-wear oil.

Mobil™ Heavy Duty (HD) Chainoil. This premium chainsaw lubricant helps extend the life of chains and guide bars on high speed chainsaws operating under severe conditions. Recommended for spring through fall operation across a temperature range of -5°C to 40°C. High viscosity base stocks enhanced with

anti-wear and extreme pressure additives help reduce wear to guide bars, chains and sprockets. A special-ized inhibitor minimizes rust and corrosion. A tackiness additive helps reduce oil consumption due to throw-off. Also recommended for industrial chain drive and plain bearing applications requiring a tacky anti-wear oil.



19

INDUSTRIAL LUBRICANTS CIRCULATING OILS

Viscosity, ASTM D445 FZG scuffing test, cSt at cSt at V.I. Pour Point, Flash Point, DIN 51534 (mod),Product ISO VG 40°C 100°C ASTM D2270 °C, ASTM D5950 °C, ASTM D92 A/16.6/90, Fail Stage

Mobil SHC 624 32 32 6.3 148 -57 236 11Mobil SHC 625 46 46 8.5 161 -54 225 12Mobil SHC 626 68 68 11.6 165 -51 225 12Mobil SHC 627 100 100 15.3 162 -45 235 12Mobil SHC 629 150 150 21.1 166 -42 220 13Mobil SHC 630 220 220 28.5 169 -42 220 13+Mobil SHC 632 320 320 38.5 172 -42 225 13+Mobil SHC 634 460 460 50.7 174 -39 228 13+Mobil SHC 636 680 680 69.0 181 -39 225 13+Mobil SHC 639 1000 1000 98.8 184 -33 222 13+

Viscosity, ASTM D445 Spec. Gravity

cSt at cSt at Pour Point, Flash Point, kg/l at 20°C,Product 40°C 100°C °C, ASTM D97 °C, ASTM D92 ASTM D1298

Mobil Glygoyle 22 177 25.1 -41 229 1.007

Viscosity, ASTM D445 Spec. Gravity cSt at cSt at V.I. Pour Point, Flash Point, kg/l at 15.6°C, Product ISO VG 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 ASTM D1298

Mobil Vacuoline 525 – 89 10.7 99 -24 264 0.88 Mobil Vacuoline 537 320 309 24.4 96 -12 288 0.89

Mobil SHC™ 600 Series. These exceptional perfor-mance synthetic gear and bearing oils help increase productivity by delivering outstanding equipment pro-tection, oil life and problem-free operation. The latest proprietary and patent pending Mobil SHC technology performs well beyond the capabilities of conventional oils in demanding applications across a wide range of temperatures. These products are resistant to

mechanical shear, even in heavily loaded gear and high shear bearing applications, so that there is virtually no loss of viscosity. Mobil SHC 600 Series lubricants have excellent low temperature properties, as well as improved air release performance in the lower viscosity grades. For information on energy efficiency, please see page 7.

Mobil Glygoyle™ Numbered Series oils are polyalkylene glycol-based (PAG) high performance lubricants that provide outstanding lubrication in extreme temperature gear, bearing and circulation system applications in conditions well beyond the capabilities of mineral oils. They are shear-stable

and have outstanding resistance to thermal degradation, oxidation and the formation of sludge and deposits. They incorporate a proprietary additive package designed to enhance EP/anti-wear protection, corrosion and rust protection and foam resistance without detract-ing from the intrinsic attributes of the PAG base oils.

Mobil Vacuoline™ 500 Series are high performance heavy duty circulating oils specifically designed to meet the critical requirements of high speed No-Twist Rod Mills manufactured by Morgan Construction Company and Danieli. Their versatile performance makes them an excellent choice for circulation systems of primary and mini-mill bearings. These oils are formulated from

high quality base stocks and a proprietary additive system to provide enhanced film strength, anti-wear and anti-scuff properties. They enjoy strong support from equipment builders, and their exceptional perfor-mance over many decades makes them the lubricant of choice of many mill operators, worldwide.



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES20

Mobil DTE™ Oil Named Series are premium perfor-mance circulating oils for applications requiring long lubricant life, including steam and hydro turbine sets and other systems. These oils are formulated from highly refined base stocks and additives, which provide extremely high levels of chemical and thermal stability, rapid separation from water and high resistance

to emulsification. They provide excellent protection against rust and corrosion, including resistance to salt water, and good anti-wear properties. These grades have excellent air release properties, enabling entrained air to separate, avoiding pump cavitation and erratic operation.

Mobil Teresstic™-C. These oils are formulated for long service life in circulating systems, hydraulic sys-tems that do not require an anti-wear oil, heat transfer systems, light duty gear cases, friction clutches and other industrial units for which long, trouble-free service is required. They are also used to lubricate bath and

ring oiled steam turbine bearings. All viscosity grades are formulated with select high performance mineral oil base stocks and carefully chosen additives to provide long service life, outstanding oxidation control, excellent rust and corrosion protection, rapid air release and foam control.

Mobil Teresstic™ V 150 circulating oil is recommended for older paper machines with specific performance requirements. A friction reducing additive is particularly effective in dryer section journal bearings. Rust and

oxidation inhibitors help control corrosion and prolong oil life. A potent anti-wear additive helps protect gears and associated bearings.

INDUSTRIAL LUBRICANTSCIRCULATING OILS

Viscosity, ASTM D445 cSt at cSt at V.I. Pour Point, Flash Point, Product ISO VG 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92

Mobil Teresstic-C 100 99 100.0 11.3 99 -15 252Mobil Teresstic-C 150 96 150.0 14.6 96 -12 260Mobil Teresstic-C 220 92 220.0 18.4 92 -6 256Mobil Teresstic-C 320 94 320.0 23.7 94 -6 278

Viscosity, ASTM D445 cSt at cSt at Pour Point, Flash Point, Product ISO VG 40°C 100°C °C, ASTM D97 °C, ASTM D92

Mobil Teresstic V 150 150 150 14.6 -3 256


Mobil DTE Oil Light 32 31.0 5.5 102 -18 218 Mobil DTE Oil Heavy Medium 68 65.1 8.7 95 -15 223Mobil DTE Oil Heavy 100 95.1 10.9 92 -15 237



21

Mobil Rarus SHC™ 1020 Series. These highperformance oils are primarily intended for severeduty rotary screw and vane air compressors. Theyare particularly well suited where mineral oil basedproducts are not meeting expectations, in applicationssubjected to high final compression temperatures orwhere extended oil drain intervals are desired. Design-specific wax-free synthetic fluids and high technology

additives are formulated for exceptional resistance tooxidation and thermal degradation. Their high viscosityindex delivers effective lubrication at high temperatures.Mobil Rarus SHC 1020 Series oils help improve pro-ductivity and reduce maintenance costs by minimizingdownstream deposits and delivering outstandingequipment protection and reliability.


Mobil Rarus SHC 1024 32 31.5 5.7 127 -48 max 245Mobil Rarus SHC 1025 46 44 7.2 131 -45 max 246Mobil Rarus SHC 1026 68 66.6 10.1 136 -45 max 246


Mobil Rarus 824 32 29.5 5.5 127 -54 244Mobil Rarus 827 100 107.5 10.12 66 -36 270Mobil Rarus 829 150 158 13.2 70 -40 270

Viscosity, ASTM D445 cSt at cSt at V.I. Flash Point, Product ISO VG 40°C 100°C ASTM D2270 °C, ASTM D92

Mobil Rarus 427 100 104.6 11.6 100 264

INDUSTRIAL LUBRICANTS COMPRESSOR OILS

Mobil Rarus™ 800 Series is a line of high perfor-mance air compressor lubricants primarily intended for the lubrication of severe duty reciprocating air compressors. They are engineered to meet or exceed the stringent requirements of the major compressor manufacturers. They are formulated with synthetic ester base oils and a high technology additive system

that provides exceptional equipment protection and reliability. Mobil Rarus 800 Series oils provide excellent wear protection and outstanding resistance to oxidation and thermal degradation. Their unique formulation provides the ability to help reduce mainte-nance costs through minimizing equipment problems and downstream deposits and carryover.

Mobil Rarus™ 427 is an air compressor lubricant designed to meet the requirements of the major com-pressor manufacturers. It is formulated with high quality mineral base oils and an additive system designed

to provide equipment protection and reliability. Mobil Rarus 427 provides good wear protection and air-oil separation, and limits valve deposits.



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES22

INDUSTRIAL LUBRICANTSCOMPRESSOR OILS

Exxcolub™ SCF PG. These custom-blended Polyalkylene Glycol (PAG) synthetic lubricants deliver excellent performance in severe-service gas compres-sor applications, exceeding the capabilities of petro-leum-base and many synthetic-base lubricants. Excellent oxidative and thermal stability helps assure

long service life in high temperature operations. Inherently high viscosity indexes (>200) facilitate low temperature startup and help maintain acceptable viscosity over a wide temperature range. Polyalkylene Glycols are highly stable even at sustained high temperatures; this helps keep deposits to a minimum.


Exxcolub SCF PG 100 100 96 17.6 202 -48 max 218Exxcolub SCF PG 150 150 133 26 232 -42 max 257Exxcolub SCF PG 190 190 195 35.1 226 -43 max 304Exxcolub SCF PS 100 100 101 13.5 135 -33 max 277Exxcolub SCF PS 150 150 144 17.6 135 -33 max 288Exxcolub SCF M2 100 100 94 11.8 116 -37 max 248Exxcolub SCF M2 150 150 153 17.1 121 -30 max 271

Exxcolub™ SCF PS. These premium quality synthetic blend gas compressor lubricants combine hydro treated mineral oil and polyalphaolefin (PAO) synthetic hydrocarbon oil. The proprietary multi-function silicone additive enhances lubricity and minimizes foaming.

A pour point depressant improves low temperature performance. A proprietary additive system reduces the effects of corrosive materials present in compres-sor streams, where lubricant is typically subjected to harsh chemicals, including hydrogen sulphide.

Exxcolub™ SCF M2. These premium hydrotreated paraffinic gas compressor lubricants are blended with a proprietary multi-function silicone additive to enhance lubricity and minimize foaming. A pour point depressant strengthens low temperature performance. Exxcolub SCF M2 oils are recommended for applica-

tions where lubricant is subjected to harsh chemical environments, including the presence of hydrogen sulphide. Also recommended for rotary screw, vane and reciprocating compressors in industrial applica-tions requiring a higher viscosity lubricant.



23

INDUSTRIAL LUBRICANTS COMPRESSOR OILS

Benefits

• Approximately twice as resistant as mineral oils to gas dilution

• Powerful corrosion inhibitors minimize risk of corrosion from hydrogen sulphide

• Will allow a maximum of 20 percent (by weight) hydrocarbon dilution

• Lighter than water, effective water- resistance and demulsibility

• Silicone based corrosion inhibitors lessen the risk of corrosion from hydrogen sulphide

• Very low vapour pressure minimizes lubricant consumption

• Control over carbon and varnish, with the potential for extended oil drain intervals

• Silicone based corrosion inhibitors minimize risk of corrosion from hydrogen sulphide

Especially recommended for

• Sour gas and high CO2 applications

• Heavy hydrocarbons where severe dilution may occur

• Cold weather conditions, especially for compressing gas of high specific gravity in cold weather

• Gas of low specific gravity under cold weather conditions and requiring a cost-effective alternative to a synthetic lubricant

• Light hydrocarbons, sour gas and low water content where a modestly priced lubricant is required

Lubricant

Exxcolub SCF PGPolyalkylene glycol synthetic formula Grades: 100 & 150

Exxcolub SCF PSSynthetic blendGrades: 100 & 150

Exxcolub SCF M2Group ll mineral oil Grades: 100 & 150



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES24

INDUSTRIAL LUBRICANTSCOMPRESSOR OILS

Mobil™ Compressor Oils provide outstanding lubri-cation in rotary and reciprocating air compressors. All viscosity grades deliver outstanding oxidation perfor-mance, wear protection, resistance to rust and corrosion, rapid water separation and foam control. Their thermal

stability and oxidation resistance help maintain clean compressors, enabling longer running periods between scheduled maintenance and oil changes. Outstanding anti-wear and corrosion protection help enhance equip-ment life, while reducing maintenance requirements.

Mobil™ Compressor Oils 264 and 460 are formulated with highly refined paraffin base oils and proprietary additive technology for compressor cylinders and pack-ing. These high viscosity lubricants are recommended for applications where gas is sour, wet or contaminated

with scrubber solution. They are ideally suited for initial break-in of compressor cylinders and packing. Both grades are formulated for outstanding cylinder and piston ring lubrication, oxidation resistance and chemical tolerance.

Mobil™ Compressor Oil N 100. This premium ISO 100 viscosity mineral oil blend is particularly well suited as a once-through cylinder lubricant in large reciprocating compressors where heavy exhaust valve deposits have been observed with other oils. When

exposed to very high surface film temperatures, this oil produces miniscule amounts of soft, fluffy carbon deposits that are easily displaced. This product can also be used as a general purpose ISO 100 lubricant.

Mobil Teresstic™ AC 32 is a compressor and circulat-ing oil formulated primarily for applications in ammonia production and chemical plants. Mobil Teresstic AC 32 is well suited for hydraulic systems – such as those

with silver plated components – requiring a mineral type oil that does not contain anti-wear additives. (For applications requiring anti-wear properties, Nuto H oils are recommended.)


Mobil Compressor Oil 68 68 68 9.1 -21 240Mobil Compressor Oil 122 – 122 12.3 -15 230Mobil Compressor Oil 220 220 220 18.4 -12 245


Mobil Compressor Oil N 100 100 98 9 -51 200


Teresstic AC 32 32 32 5.13 -40 204


Mobil Compressor Oil 264 – 280 23 -12 280Mobil Compressor Oil 460 460 485 35 -12 280

Additional Compressor Oil

Mobil SHC Cibus™ Series ........................................27



25

INDUSTRIAL LUBRICANTS CYLINDER OILS

Mobil™ Cylinder Oils are high performance high viscosity oils designed for use in enclosed worm gears operating at moderate to high speeds and tempera-tures, and where heavy loads, slow speeds or high temperatures demand high viscosity oils. They are also intended for use in steam engines, natural gas compressors requiring a separate cylinder lubricant,

and down-hole applications. They are formulated from high quality base stocks that are resistant to oxidation and thermal degradation, and the build-up of harmful deposits caused by the high operating temperatures of steam cylinders. They protect against rust and corrosion, provide good film strength and excellent lubricity and they are resistant to water washout.

Mobil DTE™ Oil 205 is a lubricating oil formulated to provide excellent anti-wear and friction reducing properties for compressor cylinder lubrication, as well as protection against rust and corrosion. Mobil DTE Oil 205 is designed for wet-gas compression and

exhibits excellent resistance to washing by water and other entrained liquids. It resists oxidation and provides effective lubrication at low feed rates, helping to extendoperating periods between valve-cleaning intervals.


Mobil 600 W Cylinder Oil -- 375 27.0 95 -9 282Mobil 600 W Super Cylinder Oil 460 460 30.5 95 -6 282Mobil Extra Hecla Super Cylinder Oil 680 680 35.8 85 0 282

Viscosity, ASTM D445 Spec. Gravity, cSt at cSt at Pour Point, Flash Point, kg/l at 15.6°C,Product 40°C 100°C °C, ASTM D97 °C, ASTM D92 ASTM D1298

Mobil DTE Oil 205 220 19.5 -9 282 0.90



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES26

INDUSTRIAL LUBRICANTSFOOD INDUSTRY LUBRICANTS

Mobil™ Food and Beverage IndustryThe food and beverage processing industry faces unique challenges. Not only must you strive for maximum productivity, you must also guard against the possibility of food contamination, including

contamination from lubricating oils and greases. This comprehensive suite of high performance oils are NSF H1 registered, which is increasingly being requested by major food retailers and government agencies.

Other Food Industry Lubricants

• Mobil DTE™ FM (32, 46, 68): premium mineral oils• Mobil Synturion™ 6: synthetic mechanical seal fluid• Mobil Gargoyle Arctic SHC™ Series: synthetic refrigeration lubricants


51524-HLP

51524-HLP51506-VDL

51524-HLP51506-VDL

51517-CLP

51517-CLP

51517-CLP

51517-CLP

KP1K-20

KP1K-20

KPFHC2P-20

141500

141498

141499

141502

141503

141505

141501

136467

141881

138558

Mobil SHC Cibus™ 32







Mobil Glygoyle™ 460

Mobilgrease™ FM Series(101)

Mobil SHC Polyrex™ Series(462)


27

INDUSTRIAL LUBRICANTS FOOD INDUSTRY LUBRICANTS

Mobil SHC Cibus™ Series lubricants are superb performance synthetic, compressor, hydraulic, gearand bearing oils designed to provide outstanding equipment protection, long oil life and problem-free

operation in the food and beverage processing and packaging industries. They are formulated from FDA and NSF registered hydrocarbon base fluids and additives.

Viscosity, ASTM D445 Spec. Gravity cSt at cSt at V.I. Pour Point, Flash Point, kg/l at 15°C, Product ISO VG 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 ASTM D4052

Mobil SHC Cibus 32 32 30 5.8 140 <-54 253 0.829Mobil SHC Cibus 46 46 43 7.7 148 -51 258 0.833Mobil SHC Cibus 68 68 72 11.4 151 -48 267 0.838Mobil SHC Cibus 100 100 102 14.6 148 -48 273 0.839Mobil SHC Cibus 150 150 162 20.7 150 -21 226 0.843 Mobil SHC Cibus 220 220 222 24.5 139 -39 274 0.843Mobil SHC Cibus 320 320 311 32.7 147 -42 284 0.854Mobil SHC Cibus 460 460 458 43.6 148 -42 294 0.856

Mobil DTE™ FM Series oils meet a wide range of multi-use requirements for equipment in food processing and packaging. These lubricants are qualified as NSF H1 type lubricants and comply with Title 21 CFR 178.3570 by the Food and Drug

Administration (USA) for lubricants with incidental food contact. These odourless, tasteless, premium quality lubricants are formulated with non-toxic NSF/FDA additives and base oils.

Viscosity, ASTM D445 Spec. Gravity cSt at cSt at V.I. Pour Point, Flash Point, kg/l at 15.6°C,Product ISO VG 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 ASTM D4052

Mobil DTE FM 32 32 31.9 5.5 106 -12 212 0.862Mobil DTE FM 46 46 45.5 6.8 105 -9 226 0.868

Additional Food Industry Lubricants

Mobil Synturion™ 6 ...................................................46

Mobil Gargoyle Arctic SHC™ Series .........................49



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES28

INDUSTRIAL LUBRICANTSGAS ENGINE OILS

Imperial Engine Recommendation – How to Select the Right Oil

Manufacturer Model Product

Ajax 2-cycle Mobil Pegasus AGX; Mobil Pegasus 801

Caterpillar All models Mobil Pegasus 1; Mobil Pegasus GMA; Mobil Pegasus 805

Clark (Dresser-Rand) All 2-cycle Mobil Pegasus AGX; Mobil Pegasus 801

Cooper-Bessemer All 2-cycle Mobil Pegasus AGX; Mobil Pegasus 801

Cummins Most models

B & C models

Mobil GEO 15W-40

Mobil GEO 15W-40

Cooper Enterprises (Delaval) All models Mobil Pegasus 801

Fairbanks-Morse (M.E.P.) 2-cycle Mobil Pegasus 801 SAE 30; Mobil Pegasus 801; Mobil Pegasus GMA

Ingersoll-Rand (Dresser-Rand) Categories I, II, III Mobil Pegasus 801 SAE 30

Jenbacher Type 2 & 3 Leanox Engines Mobil Pegasus 805; Mobil Pegasus 710

White Superior 4-cycle Mobil Pegasus GLX; Mobil Pegasus 710

1700 & 2400 Mobil Pegasus GMA; Mobil Pegasus 1; Mobil Pegasus GLX

Worthington All models Mobil Pegasus 801 SAE 30

Waukesha VSG F11 (G, GSI, GSID)

Mobil Pegasus 1; Mobil Pegasus GMA; Mobil Pegasus 805; Mobil Pegasus GLX; Mobil Pegasus 710

VGF F18, H24, L36, P48 (G, GL, GLD/GLD2)


VGF F18, H24, L36, P48 (GSI, GSID)


VHP F2895, F3521, L5790, L7042, P9390 (G, GSI, GL)


VHP F3524, L5794, L5790 (GSI), L5774, L5794 (LT)


AT – All models (275GL/GL+ AT25/27 GL)


Please refer to OEM manual for lubricant recommendations or contact your Imperial sales representative.



29

INDUSTRIAL LUBRICANTS GAS ENGINE OILS

Mobil SHC Pegasus™ 30 is a recently developedcategory of synthetic natural gas engine oil designedto provide today’s high output, low emission four-cyclegas engines with advanced levels of wear protection and fuel efficiency. Mobil SHC Pegasus 30 delivers high performance, long service life and improved productivity through a patented combination of high quality base stocks and advanced additive technology.The result is exceptional oxidation stability, nitration resistance and thermal stability, which may enable drain intervals to be extended by up to three times that

of conventional gas engine oils. Mobil SHC Pegasus 30 provides outstanding anti-wear performance to protect heavily loaded valve train components, pistons, liners, bearings, and gear trains while maintaining compatibility with catalytic converter materials. An effective detergent-dispersant system controls carbon and varnish deposits to minimize oil consumption and maintain engine cleanliness – even through extended drain intervals, which may result in lower operating and maintenance costs. For information on energy efficiency, please see page 7.

Mobil Pegasus™ 1 is a high performance synthetic gas engine oil designed to meet the highest perfor-mance requirements of some of the most demanding naturally aspirated and turbocharged stoichiometric and lean-burn gas engines. Formulated from wax-free

synthetic base oils and a balanced additive system, this oil delivers performance that is unattainable with conventional mineral oil based gas engine oils. Poten-tial benefits Include longer engine and oil life, reduced maintenance and lower fuel costs.

Mobil Pegasus™ GMA, our premium low ash natural gas engine oil, is the prime recommendation for Caterpillar and Waukesha natural gas engines and is formulated to provide excellent performance through extended oil drain intervals. Typical sulphated ash

is 0.57 % mass. The balanced additive system provides excellent control of viscosity, oxidation and nitration. Mobil Pegasus GMA protects against varnish, corro-sion, deposits and wear, while minimizing premature valve recession.

Mobil Pegasus™ 805 is a premium performance gas engine oil engineered to meet the rigorous demands of high output four-cycle engines designed to reduce emissions and improve fuel efficiency. Such engines generally operate under high load and high temperature conditions. The highest quality base stocks and an

advanced technology additive system combine to deliver exceptional oxidation stability, nitration resis-tance and thermal stability. An effective detergent and dispersant system controls carbon deposits, lacquer and sludge.

Viscosity, ASTM D445 SAE cSt at cSt at V.I. Pour Point, Flash Point, TBN, mg KOH/g, Sulfated Ash,Product Grade 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 ASTM D2896 wt% ASTM D874

Mobil SHC Pegasus 30 30 65 10.5 162 -51 255 5 0.5


Mobil Pegasus 1 15W-40 93.8 13.0 137 -48 238 6.5 0.5


Mobil Pegasus GMA 40 115 13.2 110 -21 240 6 0.57

Viscosity, ASTM D445 Spec. Gravity SAE cSt at cSt at V.I. TBN, mg KOH/g, kg/l at 15.6°C, Sulfated Ash,Product Grade 40°C 100°C ASTM D2270 ASTM D2896 ASTM D4052 wt% ASTM D874

Mobil Pegasus 805 40 130 13.5 99 6.2 0.89 0.5



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES


30

Mobil Pegasus™ GLX meets the requirements of most four-cycle high speed natural gas engines,including Superior and Waukesha VSG, VGF, VHP and AT. The medium ash additive system protects

against piston scuffing, cylinder wear, corrosion and deposits. The formulation leaves a cushioning ash to help control valve recession. Phosphorous content is low enough for catalyst exhaust systems.

Mobil Pegasus™ 710 is a premium performance gas engine oil intended primarily for modern high speed four-cycle engines where oil consumption is very low and where increased manifold pressures may keep some lubricants from reaching the valve guide areas in sufficient quantities. This oil is also recommended for

gas compressors. High quality mineral base oils and an advanced medium ash additive system provide excellent protection of engine and compressor components. Mobil Pegasus 710 delivers effective detergency and disper-sancy, along with chemical stability and resistance to oxidation, nitration, valve train wear and deposits.


Mobil Pegasus 710 40 121 13.2 98 6.5 0.896 1.0


Mobil Pegasus GLX 40 127 13.2 95 -18 250 6.0 0.8

Mobil Pegasus™ 610 is a high performance natural gas engine oil intended primarily for modern medium and high speed four-cycle engines operating on fuel containing corrosive materials such as hydrogen sulphide or halogens (compounds containing chlorine, fluorine, etc.). In these typically lean-burn engines increased manifold pressures can prevent sufficient lubricant from reaching the valve guide areas. This often leads to accelerated valve guide wear and valve

recession, increasing the potential for upper cylinder components being attacked by acidic materials gener-ated through combustion. Mobil Pegasus 610 is a 1.0% ash, high TBN gas engine oil with exceptional reserve alkalinity to offset the negative effects of corrosive ma-terials on engine components. This protection extends to cylinders, valve areas and bearings resulting in long engine life and low maintenance costs.


Mobil Pegasus 610 40 130 13.8 102 -18 264 8.6 1.0



31

INDUSTRIAL LUBRICANTS GAS ENGINE OILS

Mobil Pegasus™ 605 is a high performance natural gas engine oil primarily intended for modern medium and high speed four-cycle engines operating on fuel that contains corrosive materials such as hydrogen sulphide or such halogens as chlorine, fluorine or bromine. Exceptional reserve alkalinity helps offset the negative effects of acidic materials on engine com-ponents. Excellent corrosion protection helps prevent corrosive wear in cylinders, valve areas and bearings, promoting long engine life and low maintenance costs.

Excellent deposit control helps prevents siloxane deposits and liner laquering in biofuel and landfill gas applications with high silicon content. Preventing these deposits is a key step in controlling lube oil consump-tion. Mobil Pegasus 605 can be used for the lubrication of the reciprocating compressors in landfill, mine, coal seam, digester/fermenter, sewage and other biomass gas operations in municipal, industrial, cooperative and farm applications, including electric power generation, boiler heating, cogeneration/combined heat and power.

Mobil Pegasus™ 801 Series is a premium perfor-mance gas engine oil intended for the lubrication of all classes of gas engines operating at low, medium and high speeds where low ash or ashless oils are recom-mended. It provides outstanding engine cleanliness and performance by preventing the formation of carbon and ash deposits on pistons, in ring belt areas, on exhaust and intake ports, on valves and valve stems and in com-

bustion chambers. Mobil Pegasus 801 – SAE 30 also reduces the potential for port carboning of two-cycle gas engines. It helps minimize engine wear and protect valve faces, seats and guides of turbocharged four-cycle engines. Mobil Pegasus 801 – SAE 30 provides excep-tional protection against scuffing in demanding engine applications and also provides excellent protection against corrosion of internal engine components.


Mobil Pegasus 605 40 120 13.2 104 -15 246 4.9 0.5


Mobil Pegasus 801 40 132 13.2 97 2.8 – 0.1Mobil Pegasus 801 SAE 30 30 85 10.0 97 2.8 0.882 0.1

Mobil Pegasus™ AGX employs a highly effective ashless anti-wear additive to guard against ring and liner wear and cylinder scuffing. Ashless detergent/dis-persant additives deliver excellent control over sludge

and varnish deposits, including carbon in the ports. It is formulated with an inherently oxidation-resistant paraffinic base oil with potent anti-wear agents to guard against wear, particularly in rings, liners and cylinders.


Mobil Pegasus AGX 40 135 13.5 95 -21 250 2.5 0.04

Additional Gas Engine Oils

Mobil Delvac™ CNG/LNG 15W-40 ............................62

Mobil GEO™ 15W-40 ................................................62



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES


32

Imperial Engine Recommendation – How to Select the Right Oil

Natural Gas Engine Oil Category % SASH

Mobil Pegasus™ 801 Ashless 0.13

Mobil Pegasus™ AGX Ashless 0.03

Mobil SHC Pegasus™ 30 Low Ash 0.50

Mobil Pegasus™ 605 Low Ash 0.52



Mobil Pegasus™ GMA Low Ash 0.57

Mobil GEO™ 15W-40 Low Ash 0.54

Mobil Pegasus™ 610 Medium Ash 0.98

Mobil Pegasus™ 710 Medium Ash 0.94

Mobil Pegasus™ GLX Medium Ash 0.80



33

INDUSTRIAL LUBRICANTS GEAR OILS — ENCLOSED GEARS

Mobil SHC Gear™ Series (ISO VG 150-1000) lubri-cants are recognized around the world for innovation and outstanding performance. These synthetic prod-ucts are designed to provide outstanding protection of gears and bearings, and extended oil life even under extreme conditions. This promotes problem-free opera-tion of equipment and increased productivity. Synthetic base fluids with exceptional oxidation and thermal properties deliver excellent low temperature fluidity. The high viscosity index of these oils means less change in viscosity as temperatures change, enabling a wider operating temperature range and improved low

temperature startup. An advanced proprietary additive system provides excellent protection against scuffing and a high level of resistance against micropitting fatigue. Mobil SHC Gear Series oils have outstanding EP properties that protect even under shock load conditions. The synthetic base stocks have inherently low traction properties, resulting in low fluid friction in the load zone of non-conforming surfaces, such as gears and rolling element bearings. Reduced fluid friction also produces lower operating temperatures and improved gear efficiency. For information on energy efficiency, please see page 7.

Mobil SHC Gear™ 1500, 3200, and 6800 are high performance heavy duty gear oils primarilydesigned for enclosed gearing as well as slow speedplain and rolling element bearings. They are designed to provide outstanding service in terms of equipment protection, oil life, and problem-free operation enabling increased customer productivity. These scientifically engineered synthetic lubricants are formulated from synthetic base fluids that have exceptional oxidation and thermal properties and excellent low temperature fluidity. The combination of a naturally high viscosity index and a unique additive system enables these

products to provide outstanding performance under severe high and low temperature operating conditions. The nature of the synthetic base fluids also contributes to the products’ excellent low temperature performance. They have excellent protection against gear scuffing and resistance to shock loading. The synthetic base stocks have inherently low traction properties that result in low fluid friction in the load zone of noncon-forming surfaces such as gears and rolling element bearings. Reduced fluid friction produces lower operat-ing temperatures and improved gear efficiency.

Viscosity, ASTM D445 FZG Scuffing, FZG Scuffing, cSt at cSt at V.I. Pour Point, Flash Point, ISO 14635-1 (mod) ISO 14635-1 (mod)Product ISO VG 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 A/8.3/90, Fail Stage A/16.6/90, Fail Stage

Mobil SHC Gear 150 150 150 22.2 176 -54 233 13 Not testedMobil SHC Gear 220 220 220 30.4 180 -45 233 14 >14Mobil SHC Gear 320 320 320 40.6 181 -48 233 14 >14Mobil SHC Gear 460 460 460 54.1 184 -48 234 14 >14Mobil SHC Gear 680 680 680 75.5 192 -42 234 14 >14Mobil SHC Gear 1000 1000 1000 99.4 192 -33 234 14 >14

Viscosity, ASTM D445 FZG test, cSt at cSt at V.I. Pour Point, Flash Point, ISO 14635-1 mod.,Product ISO VG 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 Failure Stage

Mobil SHC Gear 1500 1500 1500 113 165 -18 230 13+Mobil SHC Gear 3200 -- 3200 183 165 -9 230 13+Mobil SHC Gear 6800 -- 8200 365 180 -6 230 13+



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES

INDUSTRIAL LUBRICANTSGEAR OILS — ENCLOSED GEARS

Mobilgear™ 600 XP Series high performance gear oils have excellent extreme pressure characteristics and load-carrying properties. They are intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. These oils are designed to stay ahead of gearbox technology, including design

trends toward smaller units with similar power through-put. This increase in power density places increased demands on lubricant. Mobilgear 600 XP Series oils meet the stress by providing extra protection for gears, bearings and seals.

SPARTAN™ EP-C is the brand name for a family of premium quality industrial extreme pressure gear lubricants. They are formulated with high quality mineral oils and carefully selected high performance additives that work synergistically to provide excellent gear protection and long lubricant life. SPARTAN EP-C oils contain a sulphur/phosphorus Extreme Pressure additive system that provides high load-carrying capa-

bility and excellent protection from wear. The thermal stability of SPARTAN EP-C helps reduce sludge forma-tion and keep internal surfaces clean. SPARTAN EP-C oils provide excellent protection against corrosion of steel and copper containing alloys. They also have excellent demulsibility, so that water separates rapidly from the oil, simplifying drain off from gear cases and system reservoirs.

Viscosity, ASTM D445 cSt at cSt at V.I. Pour Point, Flash Point, FZG scuffing, FZG scuffing,Product 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 Fail Stage A/8.3/90 Fail Stage A/16.6/90

Mobilgear 600 XP 68 68 8.8 101 -27 230 12+ –Mobilgear 600 XP 100 100 11.2 97 -24 230 12+ 12+Mobilgear 600 XP 150 150 14.7 97 -24 230 12+ 12+Mobilgear 600 XP 220 220 19.0 97 -24 240 12+ 12+Mobilgear 600 XP 320 320 24.1 97 -24 240 12+ 12+Mobilgear 600 XP 460 460 30.6 96 -15 240 12+ 12+Mobilgear 600 XP 680 680 39.2 90 -9 285 12+ 12+

Kinematic Viscosity cSt at cSt at V.I. Pour Point, Flash Point,Product 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92

Spartan All-Season 150 21.5 170 -36 192 Spartan 1000 1000 47.5 90 -9 246

34

Additional Enclosed Gears

Mobil SHC™ 600 Series............................................ 19



35

INDUSTRIAL LUBRICANTS GEAR OILS — ENCLOSED GEARS SPECIALTY

Mobil SHC™ Gear OH Series. These exceptional per-formance synthetic gear oils are primarily designed to lubricate enclosed gears and plain and rolling element bearings in off-highway equipment subject to shock and heavy loading. They provide outstanding equipment protection, oil life and problem-free operation, promoting increased productivity. The synthetic base fluids deliver exceptional oxidation and thermal properties and excellent low temperature fluidity, contributing signifi-cantly to low temperature performance. Synthetic base stocks have inherently low traction properties that result in low fluid friction in the load zone of non-conforming

surfaces such as gears and rolling element bearings. Reduced fluid friction produces lower operating tem-peratures and improved gear efficiency. A naturally high viscosity index and unique additive system combine to provide outstanding performance under severe high and low temperature operating conditions. Mobil SHC Gear OH Series oils deliver outstanding gear scuffing protection in heavily loaded gearboxes. Their available viscosity range: ISO VG 320 to 680. These are the products of choice for key OEMs and customers with demanding off-highway applications. For information on energy efficiency, please see page 7.

Mobilgear SHC™ XMP Series lubricants are high performance synthetic wind turbine gear oils providing outstanding equipment protection and oil life, even under extreme conditions. Our synthetic base oil technology provides exceptional oxidation resistance and thermal properties, naturally high viscosity index, excellent low temperature fluidity and the absence of undesirable compounds often found in mineral oils. A high viscosity index and low traction coefficient

combine for a significant reduction in power consump-tion in many gear drives. An advanced proprietary additive system helps prevent conventional wear such as scuffing and provides high resistance to micropitting fatigue. Mobilgear SHC XMP oils deliver outstanding rust and corrosion protection and show no tendency to plug fine filters even when wet. Compatibility with ferrous and non-ferrous metals, even at elevated temperatures, is excellent.

Mobil Glygoyle™ Series lubricants are high perfor-mance gear, bearing and compressor oils delivering outstanding efficiency, long oil life, and equipment protection. These synthetic polyalkylene glycol (PAG)

oils were designed for operating conditions beyond the capabilities of other synthetic lubricants and mineral oils. Their low pour points ensure excellent low- temperature fluidity.

Kinematic Viscosity, Viscosity, ASTM D445 FZG Gear Scuffing, cSt at cSt at V.I. Pour Point, Flash Point, (A/8.3/90), ISO 14635-1Product ISO VG 40°C 100°C ASTM D2270 °C, ASTM D5950 °C, ASTM D92 mod Failure Stage

Mobil SHC Gear OH 320 320 320 40.1 178 -45 233 >13Mobil SHC Gear OH 460 460 460 54.9 186 -42 233 >13Mobil SHC Gear OH 680 680 680 76.1 193 -39 233 >13

Viscosity, ASTM D445 Spec. Gravity FZG Scuffing, cSt at cSt at V.I. Pour Point, Flash Point, kg/l at 15.6°C, DIN 51345 (mod)Product ISO VG 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 ASTM D4052 A/16.6/90, Fail Stage

Mobilgear SHC XMP 320 320 335 38.3 164 -38 242 0.860 14+

Viscosity, ASTM D445 cSt at cSt at V.I. Pour Point, Flash Point, FZG Test, ISO.Product ISO VG 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 Fail Load Stage

Mobil Glygoyle 460 460 460.0 77.2 250 -33 265 12+



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES

INDUSTRIAL LUBRICANTSGEAR OILS — ENCLOSED GEARS SPECIALTY

INDUSTRIAL LUBRICANTSGEAR OILS — OPEN GEARS

Mobil Iogear™ EP 100 is an extreme pressure gearoil specially designed for oil field pump jack gear drivesand formulated to operate across a wide temperature

range for year-round performance. It is well suitedfor other gear applications requiring excellent low temperature performance.

Mobil SHC Gear™ 46M is a high performance ultra high viscosity synthetic lubricant designed specifically for heavily loaded, low speed open gears where bound-ary lubrication conditions often prevail. Synthetic base stocks provide remarkable low temperature fluidity; they can be pumped over relatively long distances and applied with standard spray equipment. The naturally

high viscosity index and unique additive system combine to provide exceptional thermal/oxidative properties and outstanding performance under severe high and low temperature operating conditions, even with very slow moving gears. The additive formulation also provides excellent gear scuffing protection, anti- wear performance and rust and corrosion inhibition.

Mobiltac™ 375 NC is an high performance non-lead-ed, diluent-type, heavy bodied open gear lubricant designed for a wide variety of open gear and mining applications. A non-chlorinated, volatile solvent en-sures fluidity during application, even at low tempera-tures. Once applied, the diluent evaporates and the lubricant takes on a flexible, adhesive, high strength

consistency that is maintained throughout its service life. Mobiltac 375 NC adheres strongly to gear teeth and other machine elements to resist excessive throw-off, providing a wear resistant, viscous, continuous film that lubricates well under boundary conditions. Mobiltac 375 NC is available in spray cans.

Viscosity, ASTM D445 SAE cSt at cSt at V.I. Pour Point, Flash Point,Product Grade 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92

Mobil IOGear EP 100 100 99.5 14.96 157 -40 170

Viscosity, ASTM D445 Spec. Gravity cSt at cSt at V.I. Pour Point, Flash Point, kg/l at 15.6°C,Product 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 ASTM D4052

Mobil SHC Gear 46M 46,000 1375 180 15 240 0.924

Viscosity, ASTM D445 Spec. Gravity cSt at 40°C cSt at 100°C Flash Point, kg/l at 15.6°C,Product w/diluent w/o diluent °C, ASTM D92 ASTM D1298

Mobiltac 375 NC 5000 1260 135 0.96

36

Mobil Geargard™ HVS is an ultra-high viscosity lubricant primarily intended for heavily loaded, low and medium speed open gears that may operate in boundary lubrication conditions. The ultra-high viscosity synthetic fluid combines with extreme pressure additives

to provide outstanding performance under severe conditions. Geargard HVS dispenses well in ambient temperatures as low as -10°C, while providing excellent gear protection at high operating temperatures.


Colour, Flash Point,°C cSt at 40°C cSt at 100°CProduct Visual Structure with diluent without diluent without diluent

Mobil Geargard HVS Black Smooth 110 44000 1350

Additional Enclosed Gears Specialty




37

INDUSTRIAL LUBRICANTS HEAT TRANSFER FLUIDS

INDUSTRIAL LUBRICANTS HYDRAULIC FLUIDS

Mobiltherm™ and Thermoil™ heat transfer fluids offer many years of successful service in such industries as plastics, paint, rubber, paper mill calendars, board plants, roofing, textiles and refineries. Highly refined

mineral base stocks and select additive technology combine for excellent thermal and oxidation stability.The volatility and flash points are optimized to reduce vapour pressure at elevated temperatures.

Mobil SHC™ 500 Series are our highest performance hydraulic oils and have the widest temperature range capability. These synthetic fluids have exceptional shear-stability and wear protection and are designed for extended service in high pressure, high tempera-ture vane, piston and gear pump applications where

sustained lubrication excellence is critical to productiv-ity. Their superb low and high temperature properties enable extraordinary low temperature pumpability and startup, and ensure outstanding equipment protection at extremely high temperatures. For information on energy efficiency, please see page 7.

Mobil DTE 10 Excel™ Series hydraulic oils deliver superb performance and energy efficiency. These ashless non-zinc oils are intended for high speed, high pressure, high output piston, vane and gear pumps

operating under severe conditions where high levels of anti-wear, film strength and high temperature protec-tion are needed. For information on energy efficiency, please see page 7.

Viscosity, ASTM D445 cSt at cSt at V.I. Pour Point, Flash Point,Product ISO VG 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92

Mobil SHC 524 32 32 6.4 144 -56 234Mobil SHC 525 46 46 8.54 154 -54 238Mobil SHC 526 68 68 11.52 158 -53 240 Mobil SHC 527 100 100 15.94 160 -52 243

Brookfield

Viscosity, ASTM D445 Viscosity, ASTM D2983 Dielectric cSt at cSt at V.I. Pour Point, Flash Point, cP at cP at cP at Strength, kV,Product ISO VG I40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 -20°C -20°C -40°C ASTM D877

Mobil DTE 10 Excel 15 15 15.8 4.07 168 -54 182 – – 2620 45Mobil DTE 10 Excel 22 22 22.4 5.07 164 -54 224 – – 6390 54Mobil DTE 10 Excel 32 32 32.7 6.63 164 -54 250 1090 3360 14240 49Mobil DTE 10 Excel 46 46 45.6 8.45 164 -45 232 1870 7060 55770 41Mobil DTE 10 Excel 68 68 68.4 11.17 156 -39 240 3990 16380 – –Mobil DTE 10 Excel 100 100 99.8 13.00 127 -33 258 11240 57800 – –


Mobiltherm N 100 100 108 11.8 -18 261Thermoil 32 32 32 5.31 <-24 205Thermoil 46 46 46 6.67 <-24 212Thermoil 100 100 100 10.78 <-12 252



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES

INDUSTRIAL LUBRICANTSHYDRAULIC FLUIDS

Mobil DTE™ 20 Series oils are premium performanceanti-wear hydraulic oils that meet the stringentrequirements of hydraulic systems with high pressure,high output pumps. Since they meet the rigorous

requirements of a wide range of hydraulic system and component manufacturers, these oils may simplify lubricant inventory by enabling the use of a single product with outstanding performance characteristics.


Mobil DTE 24 32 31.5 5.29 98 -27 220 0.871Mobil DTE 25 46 44.2 6.65 98 -27 232 0.876Mobil DTE 26 68 71.2 8.53 98 -21 236 0.881

38

Mobil Univis™ Ultra is a premium all-season, multi-grade hydraulic fluid that delivers excellent pumpabilitty at extremely low temperatures and excellent protection at all operating temperatures. It combines the high temperature viscosity characteristics of an all-season ISO VG 46 hydraulic oil with the outstanding low

temperature fluidity of an ISO VG 22. The all-weather performance of Mobil Univis Ultra makes it the ideal choice for stationary and mobile equipment in such outdoor applications as oil and gas, mining, forestry and construction.

Viscosity, ASTM D445 cSt at cSt at V.I. Pour Point, Flash Point, Product 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92

Mobil Univis Ultra 43.1 10.42 242 -54 196

Mobil Univis™ Extra is a premium multigrade hydraulic oil recommended for extreme climatic conditions. It delivers the same outstanding low temperature per-formance as an ISO 22 grade oil along with excellent protection at high temperatures, similar to an ISO 32 grade product. Mobil Univis Extra exhibits the excellent wear-protection characteristics of the popular Univis

N-C line and provides outstanding oxidation resistance, rust protection, demulsibility and foam control. It is well suited for most pump types, including vane, axial piston, radial piston and gear. This oil is recommended for a variety of equipment operating over a wide range of temperature, simplifying lube inventory by reducing the number of fluids required.


Mobil Univis Extra 32.8 7.6 213 -50 170



39

INDUSTRIAL LUBRICANTS HYDRAULIC FLUIDS

Mobil Univis™ N-C Series. High viscosity indexes and low pour points help ensure cold weather pump startups while maintaining oil viscosity at high ambient temperatures. A highly effective anti-wear additive protects hydraulic pumps even in severe-service appli-cations employing high pressure axial and radial piston

pumps. Mobil Univis N-C also delivers excellent rust protection, good demulsibility, oxidation resistance and anti-foam properties. Excellent all-season performance can enable operators to standardize to one viscosity grade for year-round service, simplifying lube inventory by reducing the number of fluids required.

Mobil Univis™ HVI 13 is a premium quality low vis-cosity hydraulic oil with an exceptionally high viscosity index. Because of its resistance to viscosity change with temperature, this fluid is highly recommended for equipment subject to wide swings in temperature. Applications include hydrostatic transmissions and fluid systems, such as those of numerically controlled lathes

and automatic screw machines. Mobil Univis HVI 13 can also lubricate fine instruments and other mechanisms where power input is limited and where increases in torque due to lubricant thickening cannot be tolerated. Other features include excellent lubrication, long-lasting oxidation stability and a very low pour point.

Mobil Univis™ BIO-C 40 is a non-toxic, biodegradablevegetable oil based hydraulic oil developed to meet growing global demand for more environmentallyfriendly lubricants. It is well suited for applications

demanding a high performance, anti-wear fluid inwoodland, construction, mining, marine and otherapplications facing critical environmental concerns.


Mobil Univis N-C 15 15 3.9 140 -54 150Mobil Univis N-C 22 22 5.1 140 -51 156Mobil Univis N-C 32 32 6.6 140 -48 204Mobil Univis N-C 46 46 8.2 140 -45 218Mobil Univis N-C 68 68 10.7 140 -42 226


Mobil Univis HVI 13 13.5 5.3 404 -60 101


Mobil Univis BIO-C 40 43 9.7 200 < -36 >200



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES

INDUSTRIAL LUBRICANTSHYDRAULIC FLUIDS

40

Mobil Nuto™ H Series. These high performance anti-wear hydraulic oils are specifically designed for modern high pressure mobile and stationary hydraulic systems. Premium quality base oils and high perfor-mance additives work synergistically to deliver well balanced performance for a wide range of applications. All viscosity grades exhibit good oxidation and thermal

stability, promoting long oil life and minimal deposits in severe-service hydraulic systems and high pressure, high output pumps. Anti-wear performance is excellent. Highly effective foam and air release properties help prevent erratic operation, high temperatures, wear, cavitation damage and micro dieseling associated with foam and air entrainment.

Forum™ EP 46 and 68 are high performance hydraulic and circulating oils developed for hydraulic presses made by Mueller Weingarten, Voith-Vorecon and Pahnke. These oils can also be used in other applications requiring highly effective unique load- carrying properties. Enhanced anti-wear and extreme

pressure (EP) characteristics enable these fluids to pass the rigorous Brugger load-carrying test, as required for Mueller Weingarten presses. The balanced additive system also delivers effective foam and air release, oxidation control and demulsibility.


Mobil Nuto H 32 32 32 5.4 104 -36 212Mobil Nuto H 46 46 46 6.7 104 -30 226Mobil Nuto H 68 68 68 8.5 107 -30 234Mobil Nuto H 100 100 100 11.1 95 -27 242Mobil Nuto H 150 150 150 14.6 95 -24 258


Forum EP 46 46 46.1 6.9 105 -30 214Forum EP 68 68 66.9 8.8 103 -24 228

Additional Hydraulic Fluid


Mobil DTE™ FM Series .............................................27



41

INDUSTRIAL LUBRICANTS HYDRAULIC FLUIDS — LESS FLAMMABLE

Mobil Nyvac™ FR 200D is an high performance water-glycol type less flammable hydraulic fluid. It is formulated with diethylene glycol as the main glycol component. This product does not contain ethylene glycol. It delivers excellent protection against rust and vapour phase corrosion. In hydraulic pump tests,

it has shown a high level of anti-wear performance. A high viscosity index makes Mobil Nyvac FR 200D effective over a wide range of operating temperatures. Foam resistance, low temperature flow and storage stability are also excellent.

Mobil Pyrogard™ 53 is a high performance phosphate ester synthetic fluid designed to replace petroleum based oils in hydraulic applications where

conditions preclude the use of combustible petroleum products. Mobil Pyrogard 53 is approved by Factory Mutual (FM) as a less flammable fluid.

Viscosity, ASTM D445 Spec. Gravity cSt at V.I. Pour Point, kg/l at 15.6°C, Product 40°C ASTM D2270 °C, ASTM D97 ASTM D1298

Mobil Nyvac FR 200D 41.5 175 -30 1.089

Viscosity, ASTM D445 Spec. Gravity cSt at cSt at Pour Point, Flash Point, kg/l at 15.6°C, Product 40°C 100°C °C, ASTM D97 °C, ASTM D92 ASTM D1298

Mobil Pyrogard 53 41.8 5.1 0 246 1.155



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES42

INDUSTRIAL LUBRICANTSMETALWORKING FLUIDS

Mobilmet™ 420 Series products are high performance multi-purpose cutting oils. They are chlorine-free, non-staining and non-corrosive oils for ferrous and non-ferrous metals. They are designed for light to moderate duty cutting operations and are also suitable

as machine tool lubricants and for use in light duty hydraulic systems. These oils are light in colour and transparent so the work area can be seen at all times. Mobilmet 420 Series oils are formulated to prevent the formation of oil mist in the vicinity of the machine tool.

Mobilcut™ 100 is a soluble cutting and cooling fluid suitable for a number of machining and grinding oper-ations. Select mineral oil base stocks are blended with an additive system that includes a highly effective and stable emulsifier, a potent rust protection package and

a small concentration of biocide to guard against deterioration in storage. These properties make Mobilcut 100 a versatile fluid well suited to many machining applications.

Mobilmet™ 760 Series high performance oil based cutting oils are chlorine-free and intended for severe cutting operations, especially on difficult-to-machine steels. The active cutting oil technology is corrosive to copper and its alloys. In comparison with other leading premium cutting oils, these oils have demonstrated outstanding surface finish, extended tool life and

control of built-up edge. Their light color enables the work area to be seen at all times. Closer tolerances are consistently achieved. These oils are formulated to prevent the formation of oil mist in the vicinity of the machine tool, contributing to a safer, more pleasant, work environment.

Viscosity, ASTM D445 Spec. Gravity cSt at cSt at Pour Point, Flash Point, kg/l at 15°C, Product 40°C 100°C °C, ASTM D97 °C, ASTM D92 ASTM D4052

Mobilmet 426 32 5.7 -12 194 0.874Mobilmet 427 46 6.9 -10 198 0.877

Density Emulsion Pour Point, Viscosity, ASTM D445 Product Colour, ASTM @ 15ºC (kg/L) Stability °C, ASTM D97 cSt at 40°C

Mobilcut 100 2.0 0.89 Excellent -6 35

Kinematic Viscosity Spec. Gravity

cSt at cSt at Flash Point, kg/l at 15°C, Sulfur,Product 40°C 100°C °C, COC, ASTM D92 ASTM D4052 Active

Mobilmet 762 10.0 3.0 140 0.87 1.6Mobilmet 763 18.0 4.0 160 0.87 1.6Mobilmet 766 36.0 6.0 180 0.88 1.6



43

INDUSTRIAL LUBRICANTS METALWORKING FLUIDS

Mobilcut™ 140 is a long-life, biostable, chlorine-free high performance metalworking fluid. When mixed with water the emulsion formed has a milky appearance.

Mobilcut 140 is formulated with high levels of lubricity additives to provide excellent performance in arduous machining operations.

Mobilcut™ 350 is a fully biostable, mineral oil-free synthetic metalworking fluid. It is specially formulated for grinding and general cutting operations of ferrous materials. Mobilcut 350 is a carefully balanced product

designed to provide excellent machining performance, long charge life and excellent tramp oil rejection prop-erties. Mobilcut 350 is a universal product that meets the exacting demands of modern machine shops.

Formesso™ Summer Grade is a high quality metal-forming fluid primarily recommended for bolt forming and general purpose machining, and automatic machine tools processing free machining steels in light to moderate applications. This fluid provides anti-wear and lubricity properties, resistance to

foaming and oxidation and corrosion protection. It also contains an oiliness agent and minimizes smoke formation during the bolt-forming and threading opera-tions. Being non-corrosive, Formesso Summer Grade fluid is particularly suitable for the machining of copper and its alloys.

Spec. Gravity pH at Corrosion Test RefractometerProduct Appearance kg/l at 20°C, ASTM D4052 Emulsion Type 3% Emulsion (IP 287) Breakpoint % Correction Factor

Mobilcut 140 Amber Liquid 0.95 Milky 9.1 3.0 1.0

Spec. Gravity pH at Corrosion Test RefractometerProduct Appearance kg/l at 15°C, ASTM D4052 Emulsion Type 3% Emulsion (IP 287) Breakpoint % Correction Factor

Mobilcut 350 Amber Liquid 1.10 Clear Solution 9.1 3.0 1.9

Spec. Gravity Flash Point Pour Point Viscosity, ASTM D445

Product kg/l at 15°C, ASTM D4052 °C, ASTM D92 °C, ASTM D97 cSt at 40°C

Formesso Summer Grade 0.880 250 -15 185



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES

INDUSTRIAL LUBRICANTSMIST OILS

44

Mobilgear™ MS Series (formerly Mobil Mist Lube) are high performance oils designed for the oil-fog or mist lubrication of machine components such as slideways, bearings, gears, chains etc. They are formulated from high quality, solvent refined base stocks and a unique additive system designed for optimum reclassifying properties. They have a high resistance to oxidation and good extreme pressure and anti-wear properties.

The products have enhanced surface wetting capabili-ties and they reclassify (or agglomerate) readily from a mist to a liquid when the mist is subjected to extreme turbulence or is impinged onto a surface at high veloc-ity. This allows a lubricating film to form on bearings and gears and prevents stray mist from escaping through narrow apertures into the atmosphere.

Viscosity, ASTM D445 FZG Scuffing, cSt at cSt at V.I. Pour Point, Flash Point, DIN 51534 Product 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 A/8.3/90, Fail Stage

Mobilgear MS 100 100 11.2 95 -12 234 12+ Mobilgear MS 320 320 25 100 -9 230 12+Mobilgear MS 460 460 31.5 100 -6 238 12+



45

INDUSTRIAL LUBRICANTS OTHER INDUSTRIAL OILS

Canthus™ 680 is a high viscosity straight mineral oil for economical lubrication of heavy industrial machinery. It is primarily recommended for heavy slow-moving components of enclosed gear units and circulation systems requiring an uncompounded oil of high viscos-ity. This oil has excellent demulsibility and good natural

oxidation stability. As an uncompounded steam cylinder oil, Canthus 680 separates readily from condensate and is suitable for use with dry steam or where water washing off cylinder walls is not detrimental to lubri-cation. It can also be employed as a heat transfer oil, tempering oil and forging compound.

Faxam™ paraffinic process oils are manufactured to ISO-grade viscosity limits with lower pour points for improved low temperature performance. They are well suited to a wide range of industrial and process oil ap-plications and can be used as lubricants in non-critical circulating oil and hydraulic systems where bulk oil temperatures are moderate and operating pressures low enough that anti-wear/extreme pressure additives are not required. These oils are an economic choice

where high leakage cannot be avoided. As process oils, their physical characteristics make them suitable as a diluent oil or carrier in the manufacture of such products as lubricating oil additives, paper defoamants, seals, carbon paper and other chemical formulations. Faxam oils can also be used for leather tanning, as fluids for mineral oil seals, autoclaves and dust suppression, or as lubricant-blending bases or glass mould release agents.

Mobil™ Sawguide Oils are designed to lubricate the thin blades of modern gang saws and edgers. They exhibit excellent anti-wear and extreme pressure properties and cling tenaciously to blade and guide surfaces, promoting extended blade life and reduced oil consumption. These oils control pitch and resin build-up on blades and sawguides, resulting in lower

friction and wear and increased cutting efficiency. Potent rust and corrosion inhibitors help protect blade surfaces from rust that can stain lumber. Tackiness additives help reduce the oil thrown off or blown off by air/water sprays. Most importantly, a friction reducing film reduces cooling water requirements, promoting drier sawdust.


Canthus 680 680 694 36.9 83 -9 280

Viscosity, ASTM D445 cSt at Pour Point, Flash Point, Colour, Product ISO VG 40°C °C, ASTM D97 °C, ASTM D92 ASTM

Faxam 22E 22 22 -36 205 1.0Faxam 32 32 32 -15 217 0.5


Mobil Sawguide Oil 68 68 68 9.6 -30 215Mobil Sawguide Oil 100 100 91 11.5 -24 225Mobil Sawguide Oil 150 150 150 16.2 -15 225



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES

INDUSTRIAL LUBRICANTSOTHER INDUSTRIAL OILS

46

Mobil™ Synthetic Oven Lube 1090 is a high perfor-mance synthetic high temperature lubricant designed specifically for lubrication of hot conveyor chains in drying ovens and similar severe applications. This formulation combines a carefully balanced blend of high-molecular-weight synthetic hydrocarbons and

synthetic ester base fluid plus very effective anti-wear additives. It does not contain silicone. Compared to mineral oil and conventional chain lubricants, Mobil Synthetic Oven Lube 1090 reduces carbon build-up and extends cleaning intervals.

Mobil Synturion™ 6 is a premium quality synthetic base fluid specially formulated to meet the demanding lubrication and cooling requirements of mechanical seals – and to maximize seal life. The outstanding

inherent properties of the synthetic base oil, enhanced by a proprietary additive package, are ideally suited to the demanding requirements of mechanical seal operation. Meets NSF H1 (USA) for food industries.

Mobil™ System Cleaner is an oil-soluble, solvent-freecleaner fortified with emulsifiers, dispersants, andrust inhibitors. A 5% concentration in the system oilis typically recommended. Mobil System Cleaner issafe for all ferrous and non-ferrous metals used in

industrial equipment and is compatible with all seals with up to 20% maximum concentration in the oil. Theviscosity and high flash point of Mobil System Cleanerenable equipment to be operated normally during thecleaning process.

Slurry Oil 62 is a conditioning oil used in the manufac-ture of various types of explosives made with ammoni-um nitrate. This product has a low viscosity for optimal

hydrocarbon loading and a low pour point for all-season use. The low temperature properties also facilitate handling and transfer at low ambient temperatures.

Viscosity, ASTM D445 cSt at Pour Point, Flash Point,Product 40°C °C, ASTM D97 °C, ASTM D92

Slurry Oil 62 10.1 -45 160

Viscosity, ASTM D445 cSt at cSt at Flash Point, Product ISO VG 40°C 100°C Viscosity Index °C, ASTM D92

Mobil Synthetic Oven Lube 1090 220 210 22 126 240

Viscosity, ASTM D445 Spec. Gravity, cSt at cSt at V.I. Pour Point, Flash Point, kg/l at 15ºC,Product 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 ASTM D4052

Mobil Synturion 6 5.2 1.89 135 -63 168 0.799

Viscosity, ASTM D445 Spec. Gravity, cSt at Flash Point, kg/l at 15ºC,Product 40°C °C, ASTM D92 ASTM D4052

Mobil System Cleaner 55 280.4 (138) 0.926



47

INDUSTRIAL LUBRICANTS PAPER MACHINE OILS

Mobil SHC™ PM Series high performance synthetic lubricants are specifically designed for some of the most demanding industrial paper machine circulating systems. They deliver exceptional lubrication char-acteristics not attainable with conventional premium mineral-oil based fluids. These oils provide maximum protection for gears and bearings operating under some of the most severe conditions. Their very low pour points and naturally high viscosity index (VI)

help ensure good low temperature performance and startup while maintaining excellent viscosity characteristics at very high temperatures. The fluids are very shear-stable and maintain viscosity control even when subjected to severe mechanical shear in heavily loaded bearings and gears. Their low traction coefficient and high viscosity index promote lower energy consumption and reduced component operat-ing temperatures.

Mobil DTE™ PM Series oils are specifically designed for demanding industrial paper machine circulating systems. They are engineered to provide exceptional lubrication qualities while protecting system com-ponents from rust and corrosion. This is particularly important in the wet-end where water and chemical contaminants can enter the lubrication system. They

exhibit good viscosity characteristics, allowing reduced startup to production times while maintaining excellent viscosity characteristics at high temperatures. They provide excellent resistance to oxidation and thermal degradation, exceptional protection against rust and corrosion, and a high level of anti-wear performance.

Viscosity, ASTM D445 V.I. Spec. Gravity cSt at cSt at ASTM D2270, Pour Point, Flash Point, kg/l at 15.6°C,Product ISO VG 40°C 100°C typical °C, ASTM D97 °C, ASTM D92 ASTM D1298

Mobil SHC PM 220 220 225 25.6 127 -36 220 0.863Mobil SHC PM 320 320 325 34.7 130 -33 220 0.865


Mobil DTE PM 150 150 150 14.7 95 min -6 250 0.888Mobil DTE PM 220 220 220 19.0 95 min -6 260 0.889Mobil DTE PM 320 320 320 25.4 95 min -6 250 0.892



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES

INDUSTRIAL LUBRICANTSPNEUMATIC TOOL OILS

INDUSTRIAL LUBRICANTSQUENCH OILS

48

Mobil Arox™ EP Series high performance rock drill oils are designed primarily for pneumatically operated rock drills in underground and surface mining opera-tions. High quality base stocks and carefully selected additives combine to deliver excellent chemical stability and outstanding protection against wear and corro-sion. These oils provide an optimum balance between adhesiveness and emulsibility. This allows the lubricant

to absorb moisture from the wet mine air system, while maintaining a protective film on drill components. Potent EP characteristics help protect components subjected to percussive contact for improved drill life in heavily loaded equipment. The high viscosity indexes and low pour points help ensure effective lubrication at high and low operating temperatures.

Mobil Fenso™ Series quench oils promote excellent long life performance in cold quenching operations. FENSO 90 is a premium high speed product, formu-lated with a highly effective accelerator concentrate to help provide long service life with dependable quench

speed control, as well as excellent and consistent cleanliness of parts. FENSO 150 is a high speed cold quench oil recommended for carbon and alloy steels requiring uniform hardness, cleanliness and dimensional stability.

Viscosity, ASTM D445 cSt at cSt at Pour Point, Flash Point,Product ISO VG 40°C 100°C °C, ASTM D97 °C, ASTM D92

Mobil Arox EP 22 22 22 4.2 -45 168Mobil Arox EP 32 32 32 5.6 -33 219Mobil Arox EP 68 68 68 9.1 -33 239Mobil Arox EP 100 100 100 11.9 -21 252Mobil Arox EP 150 150 150 15 -15 268Mobil Arox EP 220 220 220 19.5 -21 288

Viscosity, ASTM D445 IVF Quench Test cSt at cSt at Pour Point, Max cooling rate Product 40°C 100°C °C, ASTM D97 °C/min (@°C)

Mobil Fenso 90 38 6.5 200 637Mobil Fenso 150 25.1 4.7 205 634



49

INDUSTRIAL LUBRICANTS REFRIGERATION OILS

Mobil Glygoyle™ 22 is a high performance synthetic lubricant that delivers outstanding performance in gear, bearing and circulation system applications operating at extreme temperatures in conditions well beyond the capabilities of mineral oils. This polyalkylene glycol-based (PAG) lubricant is shear-stable with out-standing resistance to thermal degradation, oxidation

and the formation of sludge and deposits. A proprietary additive system strengthens EP/anti-wear protection, guards against corrosion and rust and resists foam without detracting from the intrinsic attributes of the PAG base oils. It is suitable for specific refrigeration applications, such as propane and butane screw and centrifugal compressors.

Mobil Gargoyle™ Arctic Oils have very low pourpoints for lubricating cylinders and bearings ofreciprocating and rotary refrigeration compressors.These naphthenic oils are almost wax-free, delivering

excellent fluidity at very low temperatures. They areused primarily with ammonia refrigerants but are suitable for many other refrigerant types; exceptionsinclude all HFC refrigerants and sulphur dioxide.

Mobil Gargoyle Arctic SHC™ 200 Series are syn-thetic hydrocarbon polyalphaolefin (PAO) lubricants for refrigeration compressors and heat pumps in severe service. They are recommended for reciprocating and

rotary compressors and are particularly successful in systems using ammonia as the refrigerant. These fluids are compatible with most common refrigerants, except sulphur dioxide.

Mobil Zerice™ S Oils are premium quality synthetic refrigeration compressor lubricants based on alkyl benzenes, which have outstanding miscibility with hydrochlorofluorocarbon (R22). This allows them to be used in very low temperatures, down to -60°C. Their very low pour and flow points help prevent harmful wax precipitation, which can block expansion

valves and heat transfer surfaces. The synthetic formulation provides excellent chemical stability, which resists reaction with refrigerants and maintains high thermal stability to help prevent oil breakdown. In some circumstances, these oils can also be used in compressors where ammonia acts as the refrigerating fluid.

Viscosity, ASTM D445 cSt at cSt at Pour Point, Flash Point,Product 40°C 100°C °C, ASTM D97 °C, ASTM D92

Mobil Gylgoyle 22 177 25.1 -41 229

Viscosity, ASTM D445 cSt at Pour Point, Flash Point,Product ISO VG 40°C °C, ASTM D97 °C, ASTM D92

Mobil Gargoyle Arctic C Heavy 46 46 -39 195Mobil Gargoyle Arctic Oil 300 68 68 -36 200


Mobil Gargoyle Arctic SHC 226E 68 69 10.1 136 -50 266Mobil Gargoyle Arctic SHC 230 220 220 25 149 -39 260


Mobil Zerice S 68 68 68 6.5 -27 174

Please contact your local sales rep or our technical help desk at 1-888-968-3776 for any inquiries about your application.



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES

INDUSTRIAL LUBRICANTSRUST PREVENTIVE

50

Mobilarma™ 245 rust preventive is designed to protect metal surfaces from rust and corrosion. It is formulated using light bodied petroleum solvents with polar rust preventive, water displacement and fingerprint neutral-izing additives. This product is easy to apply and easy to remove, making its use less manpower intensive. Mobilarma 245 is suited for the thin film protection of

finely finished parts between machining operations, including those where water-soluble cutting and grind-ing fluids have been used. It is also suitable for use on parts just before they are packaged for storage or shipment, or to “dry” parts as temporary protection until a heavier rust preventive can be applied.

Mobilarma™ 700 Series premium performance rustpreventives cover a range of applications, includingstorage and inter-operational activities. Mobilarma 778 is designed for the protection of cold-rolled sheet and coiled steel in the metal industry. Mobilarma 798 is for the lubrication and rust protection of wire rope in in-

dustrial, construction, mining and marine applications. Mobilarma 700 Series products exhibit excellent water displacing properties and form thin tenacious films that protect surfaces even under severe conditions, including high moisture levels and exposure to acid or corrosive fumes.

Mobil Vaprotec™ Light is an ISO 32, turbine-quality circulation oil containing anti-oxidants and defoamants. It is enhanced with a three-phase rust inhibitor to protect surfaces lightly coated with oil, a liquid phase

inhibitor to protect surfaces submerged in oil, and vapour space inhibitors to protect surfaces exposed to oil vapours.

Viscosity, ASTM D445 cSt at Flash Point,Product 40°C °C, ASTM D92

Mobilarma 245 2.6 38

Viscosity, ASTM D445 Spec. Gravity

cSt at cSt at Pour Point, Flash Point, kg/l at 15.6°C,Product 40°C 100°C °C, ASTM D97 °C, ASTM D92 ASTM D1298

Mobilarma 778 39 – -3 190 0.880Mobilarma 798 – 23.1 – 238 –

Viscosity, ASTM D445 Spec. Gravity cSt at cSt at Pour Point, Flash Point, kg/l at 15.6°C,Product 40°C 100°C V.I. °C, ASTM D97 °C, ASTM D92 ASTM D1298

Mobil Vaprotec Light 30 5.3 95 -7 193 min 0.875



51

INDUSTRIAL LUBRICANTS SPINDLE OILS

INDUSTRIAL LUBRICANTS TRANSFORMER OILS

Mobil Velocite™ Oil Numbered Series are premium performance products primarily designed for the lubrication of high speed spindles in machine tools. They are also used in some critical hydraulic, circula-tion systems and air line oilers where the appropriate

viscosity grade is selected. They are formulated from select high quality, low viscosity base oils and additives that deliver good resistance to oxidation and protection from rust and corrosion. They possess very good resis-tance to foaming and separate readily from water.

Voltesso™ is a premium line of electrical insulating oils designed to meet the critical operating requirements of most types of electrical equipment. They are made from fully refined, naphthenic base stocks and have excellent dielectric strength and power-factor characteristics and are formulated to resist oxidation and sludge. Voltesso oils have outstanding low temperature flow characteris-

tics that help improve oil circulation and heat transfer in electrical equipment operating under the most severe cold weather conditions. They are recommended for use in power transformers, especially those that have forced oil cooling or are subject to cold startup. They meet Canadian Standards Association C50-08 specifi-cations for Class A, Type I and Type II oils respectively.


Mobil Velocite No 6 10 10.0 2.62 -15 180Mobil Velocite No 10 22 22.0 4.0 -30 212

Viscosity, ASTM D445 cSt at cSt at Pour Point, Flash Point,Product 40°C 100°C °C, ASTM D97 °C, COC, ASTM D92

Voltesso N36 7.6 2.1 -46 max 145 minVoltesso 35 7.6 2.1 -46 max 145 min



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES

INDUSTRIAL LUBRICANTSTURBINE OILS

52

Mobil SHC™ 800 Series turbine oils are designed specifically to meet the needs some of the most severe industrial gas turbine applications with a nominal 10,000 hour TOST life. They are recommended for the lubrication of land-based gas turbines, particularly units under 3,000 hp used as standby power units, and in some types of total energy and combined cycle (gas/steam) systems. This innovative product family is formulated from wax-free synthesized hydrocarbons

and a unique additive system. This formula provides outstanding low temperature fluiditiy and exceptional resistance to degradation at high temperatures well beyond the capabilities of premium quality mineral oils. Mobil SHC 800 Series lubricants also provide excellent anti-wear properties as well as protection against rust and corrosion plus good air release performance and resistance to foaming.

Mobil DTE™ 932 GT is a next generation high perfor-mance turbine oil designed for use in GE large frame gas turbines. This product is based on selected high quality base oils carefully balanced with a proprietary

additive system to provide long oil life in combination with industry leading “keep clean” performance. The for-mulation also includes a non-zinc anti-wear system to meet the load-carrying requirements of geared turbines.

Mobil DTE™ 800 Series high performance turbine oils are designed for use in steam turbines, gas turbines and combined cycle gas turbine (CCGT) applications under some of the most severe operating conditions. These progressive products are based on high quality hydrotreated basestocks for exceptional thermal/oxida-tion resistance along with specially chosen additives

engineered to provide the deposit control and “keep clean” performance required by severe duty gas turbines as well as excellent water separability needed for steam turbine operation. The formulations also include a non-zinc anti-wear system to meet the load-carrying requirements of geared turbines.


Mobil SHC 824 32 31.5 5.9 135 <-54 248 0.83Mobil SHC 825 46 43.9 7.9 145 -45 248 0.83


Mobil DTE 932 GT 32 31.5 6.1 141 -18 240 0.84


Mobil DTE 832 32 29.6 5.4 110 -30 224 0.86Mobil DTE 846 46 42.4 6.2 106 -30 244 0.87



53

INDUSTRIAL LUBRICANTS TURBINE OILS

Mobil DTE™ 700 Series lubricants are the most recent addition to the Mobil DTE turbine lubricant family, long recognized for high quality and reliability. These zinc-free lubricants are specifically designed for gas and steam turbine applications. They are formulated with carefully selected base stocks and additives, including anti-oxidants, rust and corrosion inhibitors

and anti-foam agents. These deliver outstanding resistance to oxidation and chemical degradation. Mobil DTE 700 lubricants exhibit excellent water separation, resistance to emulsion formation and anti-foaming characteristics to provide reliable opera-tion. Their enhanced air release properties are critical for turbine hydraulic control mechanisms.

Mobil DTE™ 724 Oil was developed for higher-output gas turbines such as the General Electric Heavy Duty Gas Turbine Frame 7000. Mobil DTE 724 Oil offers

excellent thermal and oxidative stability, and resistance to deposit formation to meet the high temperature demands of gas turbines.

Mobil DTE™ 732 M is next generation high perfor-mance turbine oil designed for use in Mitsubishi Heavy Industry (MHI) non-geared Single Shaft Heavy Duty Gas & Steam Turbines and Multi Shaft Gas Turbines. This product meets MHI’s requirements

for long life – high temperature turbine applications, MS04-MA-CL005, through high quality base oils and additive system designed to provide long oil life. Mobil DTE 732 M also meets the requirements of MS04-MA-CL001 and CL002.


Mobil DTE 732 32 30 5.5 117 -30 228Mobil DTE 746 46 44 6.8 113 -30 230


Mobil DTE 724 32 31 5.4 95 10 420


Mobil DTE 732 M 32 31.3 5.8 131 -15 233



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES

INDUSTRIAL LUBRICANTSTURBINE OILS

54

Mobil Teresso™ is a line of premium turbine-quality R&O (Rust & Oxidation) circulating oils designed primarily for steam and hydraulic turbine circulating systems. All grades are formulated from select API Group 1 basestocks and a high performance additive system that provides outstanding oxidation control, rapid separation of foam and air and protection from rust and corrosion. These oils easily surpass the

sludge formation tendency specifications required by many utilities, in addition to passing oxidation tests. Mobil Teresso oils offer excellent demulsibility, rust inhibition and foam control. They are also recommended for use in circulating bath, splash and ring oiled systems supplying lubricant for bearings and gears of industrial machinery. They can also be used in hydraulic systems where anti-wear oil is not required.

Mobil Teresso™ GTC Series. These high performance turbine oils deliver excellent lubrication for turbines in the most severe operating conditions. These highly versatile lubricants can be used in steam, gas, and combined cycle gas turbine (CCGT) applications.

High quality hydrotreated basestocks combine with a proprietary additive package to work synergistically, providing exceptional trouble-free long-life performance in severe cyclical service gas turbines.


cSt at cSt at Pour Point, Flash Point, DensityProduct 40°C 100°C °C, ASTM D97 °C, ASTM D92 @ 15°C (kg/L)

Mobil Teresso 32 32 5.13 -32 204 0.868Mobil Teresso 46 46 6.36 -27 212 0.873Mobil Teresso 68 68 8.26 -26 226 0.876

Viscosity, ASTM D445 cSt at V.I. Pour Point, Flash Point,Product 40°C ASTM D2270 °C, ASTM D97 °C, COC, ASTM D92

Mobil Teresso GTC 32 32 118 -27 215 minMobil Teresso GTC 46 46 116 -24 215 min



Mobil Vactra™ Oil Numbered Series are premium- quality slideway lubricants specifically designed to meet the requirements for accuracy, aqueous coolant

separability, and equipment protection of precision machine tools.

Mobil Vacuoline™ 1400 Series are high performance lubricants specifically designed to satisfy the require-ments of machine tools that use a single oil for both hydraulics and way lubrication. They are formulated using high quality mineral base oils and a unique addi-tive system that provides excellent lubricity to eliminate stick-slip and chatter of heavily loaded and vertical

box ways. They exhibit a high degree of oxidation and thermal stability that helps to extend oil life and keep lubricated surfaces clean and free from corrosion or deposits that could detract from finished parts quality and accuracy. These oils provide the optimum balance between these divergent requirements.

Viscosity, ASTM D445 cSt at Pour Point, Flash Point,Product ISO VG 40°C °C, ASTM D97 °C, ASTM D92

Mobil Vactra No. 2 68 68 -33 228Mobil Vactra No. 4 220 221 -3 240


Mobil Vacuoline 1405 32 32 5.3 96 -12 max 210Mobil Vacuoline 1409 68 68 8.57 96 -6 max 218Mobil Vacuoline 1419 220 215 19.0 96 -6 max 257

55

INDUSTRIAL LUBRICANTS WAY OILS



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES56

COMMERCIAL VEHICLE PRODUCT LISTING BY APPLICATION

COMMERCIAL VEHICLE LUBRICANTS PRODUCT PAGE Heavy Duty Diesel Engine Oils HDEO Selection Chart ............................................57-58

Multigrade HDEO Selection Star Chart ....................... 59

Mobil Delvac 1™ ESP 5W-40 and 0W-40 ................... 60

Mobil Delvac 1™ LE 5W-30 ......................................... 60

Mobil Delvac™ Elite 222 0W-30 .................................. 60

Mobil Delvac™ Elite 10W-30 and 15W-40 ................... 60

Mobil Delvac™ 1300 Super 10W-30 and F2 15W-40....61

Mobil Delvac™ 1230 and 1240 .....................................61

Mobil Delvac™ 1640 .................................................... 61

DIOL™ 9 RD Series .................................................... 62

Heavy Duty Natural Gas Engine Oils Mobil Delvac™ CNG/LNG 15W-40 .............................. 62

Mobil GEO™ 15W-40 .................................................. 62

Heavy Duty Power Transmission Fluids Mobil Delvac™ Synthetic Transmission Fluid 50 ......... 63

Mobil Delvac™ Synthetic ATF ...................................... 63

Mobil Delvac™ Synthetic Gear Oils ............................. 63

Mobil Delvac™ Synthetic Final Drive and Axle Oil ....... 63

Mobilube™ HD LS 80W-90 ......................................... 66

Mobilube™ HD Plus MG 75W,

80W-90 and 85W-140 .................................................. 66

Mobilube™ HD Extra MG 75W and 80W-140 ............. 66

Mobilube™ XFD 50 and 60 ......................................... 66

Mobiltrans™ AST (All-Season Transmission) .............. 67

Mobiltrans™ AST 30 and

Mobiltrans™ AST Extra 20 .......................................... 67

Mobiltrans™ HD 10W, 30 and 50 ................................ 67

Tractor Hydraulic Fluids Mobil Hydraul™ ........................................................... 68

Railway Galcar All Year ............................................................. 68

Coolant/Antifreeze Mobil Delvac™ Extended Life

Coolant/Antifreeze – C Series ..................................... 69

Mobil™ Heavy Duty SCA

Precharged Coolant/Antifreeze .................................... 69



Mobil Delvac 1 ESP Mobil Delvac 1 LE Mobil Delvac Elite 222 Mobil Delvac Elite Mobil Delvac 1300 SuperViscosity Grade 5W-40 0W-40 5W-30 0W-30 10W-30 15W-40 10W-30 F2 15W-40API CF – – – – – – R RAPI CF-2 – – – – – – – RAPI CG-4 R – – – – – – –API CH-4 R R – R R R R RAPI CI-4 R R R R R R R RAPI CI-4 PLUS R R R R R R R RAPI CJ-4 R R R R R R R RAPI SF – – – – – – – –API SH – – – R – – – –API SJ – – – R – – – –API SL R – – R – R R RAPI SM R R – R – R R RAPI SN – – R – – – – –ACEA E2 – – – – – – – –ACEA E5 – – – – – – – –ACEA E6 – – R – – – – –ACEA E7 R – R – R R – –ACEA E9 R – R – R – R RJASO DH-1 – – – – – – – –JASO DH-2 – – R – – – – –CATERPILLAR ECF-2 R – – – – R – –CATERPILLAR ECF-3 R R R R R R R RCATERPILLAR TO-2 – – – – – – – –CUMMINS CES 20071 – – – – – – – –CUMMINS CES 20072 – – – – – – – –CUMMINS CES 20076 – R – R – – – –CUMMINS CES 20077 – – – – – – – –CUMMINS CES 20078 – – – – – – – –CUMMINS CES 20081 R R R R R R R RDAF EXTENDED DRAIN – – R – – – – –FORD WSS-M2C171-E – – R – – – – –Twin Disc S364A R – – – – – – –DETROIT FLUID SPEC 7SE 270 – – – – – – – –DETROIT FLUID SPEC 93K214 R – – – – R – –DETROIT FLUID SPEC 93K218 R – R – – – – RDETROIT ENGINE OIL 93K218 – – – – R R – –DEUTZ DQC III-10 LA R – – – – – – –DEUTZ DQC IV-10 LA – – R – – – – –EMD ENGINES – – – – – – – –GE – – – – – – – –MACK EO-M – – – – – – – –MACK EO-M Plus – – – R – – – –MACK EO-N Premium Plus 03 R R – – – – R –MACK EO-O Premium Plus R – R – R R R RMAN M 270 – – – – – – – –MAN M 3275-1 – – – – – – – –MAN M 3277 R – – – – – – –MAN M 3477 – – R – – – – –MAN M 3677 – – R – – – – –MB-APPROVAL 228.2 – – – – – – – –MB-APPROVAL 228.3 – – – – – – – –MB-APPROVAL 228.31 R – R – R R – RMB-APPROVAL 228.51 – – R – – – – –MB-APPROVAL 235.27 R – – – – – – –MTU OIL CATEGORY 2 – – – – – – – –MTU OIL CATEGORY 2.1 R – – – – – – RMTU OIL CATEGORY 3.1 – – R – – – – –RENAULT TRUCK RGD – – – – – – – –RENAULT TRUCK RLD-2 – – R – – – – –RENAULT TRUCK RLD-3 – – R – – – R –RENAULT TRUCK RXD – – – – – – – –VICKERS 35VQ25 – – – – – – – –VOLVO VDS-2 – – – – – – R RVOLVO VDS-3 R – R – R R R RVOLVO VDS-4 R – R – R R R RZF TE-ML04B – – – – – – – –ZF TE-ML04C – – – – – – – –

COMMERCIAL VEHICLE LUBRICANTS HEAVY DUTY ENGINE OILS SELECTION CHART

COMMERCIAL VEHICLE LUBRICANTSHEAVY DUTY ENGINE OILS SELECTION CHART

IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES

Mobil Delvac 1230 Mobil Delvac 1240 Mobil Delvac 1640 DIOL 9 RDViscosity Grade 40 20W-40API CF R R R – –API CF-2 R R – – –API CG-4 – – – – –API CH-4 – – – – –API CI-4 – – – – –API CI-4 PLUS – – – – –API CJ-4 – – – – –API SF R R R – –API SH – – – – –API SJ – – – – –API SL – – – – –API SM – – – – –API SN – – – – –ACEA E2 – – R – –ACEA E5 – – – – –ACEA E6 – – – – –ACEA E7 – – – – –ACEA E9 – – – – –JASO DH-1 – – R – –JASO DH-2 – – – – –CATERPILLAR ECF-2 – – – – –CATERPILLAR ECF-3 – – – – –CATERPILLAR TO-2 – – – – –CUMMINS CES 20071 – – – – –CUMMINS CES 20072 – – – – –CUMMINS CES 20076 – – – – –CUMMINS CES 20077 – – – – –CUMMINS CES 20078 – – – – –CUMMINS CES 20081 – – – – –DAF EXTENDED DRAIN – – – – –FORD WSS-M2C171-E – – – – –Twin Disc S364A – – – – –DETROIT FLUID SPEC 7SE 270 – – – – –DETROIT FLUID SPEC 93K214 – – – – –DETROIT FLUID SPEC 93K218 – – – – –DETROIT ENGINE OIL 93K218 – – – – –DEUTZ DQC III-10 LA – – – – –DEUTZ DQC IV-10 LA – – – – –EMD ENGINES – – – R RGE – – – R RMACK EO-M – – – – –MACK EO-M Plus – – – – –MACK EO-N Premium Plus 03 – – – – –MACK EO-O Premium Plus – – – – –MAN M 270 – – R – –MAN M 3275-1 – – – – –MAN M 3277 – – – – –MAN M 3477 – – – – –MAN M 3677 – – – – –MB-APPROVAL 228.2 – – R – –MB-APPROVAL 228.3 – – – – –MB-APPROVAL 228.31 – – – – –MB-APPROVAL 228.51 – – – – –MB-APPROVAL 235.27 – – – – –MTU OIL CATEGORY 2 – – R – –MTU OIL CATEGORY 2.1 – – – – –MTU OIL CATEGORY 3.1 – – – – –RENAULT TRUCK RGD – – – – –RENAULT TRUCK RLD-2 – – – – –RENAULT TRUCK RLD-3 – – – – –RENAULT TRUCK RXD – – – – –VICKERS 35VQ25 – – – – –VOLVO VDS-2 – – – – –VOLVO VDS-3 – – – – –VOLVO VDS-4 – – – – –ZF TE-ML04B – – R – –ZF TE-ML04C – – – – –

COMMERCIAL VEHICLE LUBRICANTS HEAVY DUTY DIESEL ENGINE OILS

Choose the best protection for your vehicle. Engine

ProtectionFuel Economy

PotentialLow-Temperature

Start-UpExtended

Drain Capacity

ExtendedDrain Capacity

Emissions System Protection

Mobil Delvac 1™ Our ultimate synthetic performance for most conditions ★★★ ★★★ ★★★★ ★★★★ ★★★

Mobil Delvac™ Elite Advanced synthetic blend with exceptional resistance to sludge ★★ ★★ ★★★ ★★★ ★★★

Mobil Delvac 1300 Super

Premium conventional oil formulated to meet or exceed original equipment manufacturer (OEM) and API CJ-4 requirements, even in some of the most extreme conditions

★★ ★ ★★ ★★ ★★★

★ The number of stars indicates relative performance level.

Multigrade Heavy Duty Engine Oils Selector Star Chart

59 Visit mobil.ca /pds for the most current product information Click Here to return to PRODUCT APPLICATION INDEX


60

Viscosity, ASTM D445 cSt at cSt at V.I. Sulfated Ash, TBN, mg KOH/g, Pour Point,Product 40°C 100°C ASTM D2270 wt%, ASTM D874 ASTM D2896 ºC, ASTM D97

Mobil Delvac 1 ESP 5W-40 98 14.7 156 1.0 8.7 -48 Mobil Delvac 1 ESP 0W-40 87 15.2 186 1.0 7.7 -48


Mobil Delvac Elite 222 0W-30 69 12.2 176 1.0 7.7 -45


Mobil Delvac 1 LE 5W-30 40 11.8 168 1 10 -51


Mobil Delvac Elite 10W-30 81 12.2 146 1.0 10.7 -36 Mobil Delvac Elite 15W-40 111 15.2 140 0.9 10.7 -36

COMMERCIAL VEHICLE LUBRICANTSHEAVY DUTY DIESEL ENGINE OILS

Mobil Delvac 1™ ESP 5W-40 and 0W-40 synthetic, high performance, heavy duty diesel engine oil helps extend engine life and may help improve fuel economy in modern diesel engines operating in severe applica-tions. This oil meets the API CJ-4 specification. State-of-the-art technology delivers exceptional performance in modern low emission engines, including those with Exhaust Gas Recirculation (EGR) and aftertreatment systems with Diesel Particulate Filters (DPFs) and

Diesel Oxidation Catalysts (DOCs). It can also be used in refrigeration units and older well-maintained engines. Mobil Delvac 1 ESP 5W-40 and 0W-40 is recommended for a wide range of heavy duty applica-tions and operating environments found in the on-road transport and off-road mining, forestry, construction, and agricultural industries. It also meets the API SM specification for gasoline engines.

Mobil Delvac™ Elite 222 0W-30 synthetic, heavy duty diesel engine oil helps extend engine life and improve fuel economy in modern diesel engines. Formulated

with API CJ-4 additive technology, it is excellent for light and heavy duty diesel engines, including those with EGR and/or DPFs (Diesel Particulate Filters).

Mobil Delvac™ Elite 10W-30 and 15W-40 are syn-thetic blend heavy duty diesel engine oils for extended drain capability. They meet the API CJ-4 specification, and provide the highest level of protection to modern, high performance diesel engines with Exhaust Gas Recirculation (EGR) and aftertreatment systems with

Diesel Particulate Filters (DPFs) and Diesel Oxidation Catalysts (DOCs). These oils exhibit enhanced low temperature fluidity, high temperature viscosity retention, and piston deposit control and are highly recommended by engine builders for use in all high performance diesel engines in severe service, on and off highway.

Mobil Delvac 1™ LE 5W-30 synthetic, heavy duty diesel engine oil provides advanced engine protec-tion, and helps improve fuel economy in modern low emissions vehicles. Mobil Delvac 1 LE 5W-30 utilizes state-of-the-art technology to deliver exceptional performance: engine durability, emissions system protection and extended drain capability.

It is well suited for an extensive array of diesel-powered commercial vehicles for both on- and off-highway use in industries such as transportation, mining, construc-tion and agriculture. Mobil Delvac 1 LE 5W-30 meets or exceeds an extremely broad range of industry and manufacturer specifications from around the world.

IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ESVisit mobil.ca /pds for the most current product information Click Here to return to PRODUCT APPLICATION INDEX


61

COMMERCIAL VEHICLE LUBRICANTS HEAVY DUTY DIESEL ENGINE OILS


Mobil Delvac 1300 Super 10W-30 79 11.9 145 1.0 8.8 -47Mobil Delvac 1300 Super F2 15W-40 114 15.0 137 1.0 8.8 -44

Mobil Delvac™ 1300 Super 10W-30 and F2 15W-40 high performance diesel engine oil helps extend en-gine life in some of the most severe on- and off-high-way applications. It delivers outstanding performance in modern high output, low emission engines including those with Exhaust Gas Recirculation (EGR) and aftertreatment systems with Diesel Particulate Filters

(DPFs) and Diesel Oxidation Catalysts (DOCs). Fully backwards compatible, Mobil Delvac 1300 Super 10W-30 and F2 15W-40 delivers the same exceptional performance in older conventional engines. As a result, they meet or exceed the requirements of the API CJ-4, CI-4 PLUS and CH-4 service categories as well as those of Original Equipment Manufacturers (OEMs).


Mobil Delvac 108 12 100 0.80 5.8 -21


Mobil Delvac 1640 132 14.7 112 1.4 12 -21

Mobil Delvac™ 1230 and 1240 are heavy duty, diesel engine oils formulated from high performance base oils and a balanced additive system of ashless dispersants, metallic detergents, and inhibitors to control oxidation,

wear, corrosion, and rust. They are used in a wide range of applications where a monograde lubricant is recom-mended including 2-cycle diesel applications (e.g. the Detroit Series 53, 71 and 92 two-cycle engines).

Mobil Delvac™ 1640 is a high performance mono-grade diesel engine oil formulated from advanced technology base oils and a balanced additive system. It is recommended for intercooled, turbocharged

engines operating under severe conditions on and off highway, and a range of applications calling for a monograde lubricant.



62

Mobil Delvac™ CNG/LNG 15W-40 high performance heavy duty engine oil is formulated specifically for spark ignited CNG and LNG fueled truck and bus engines. It provides excellent performance in the

challenging operating environments presented by CNG (Compressed Natural Gas) and LNG (Liquefied Natural Gas) and offers extended drain interval capability.

COMMERCIAL VEHICLE LUBRICANTSHEAVY DUTY DIESEL ENGINE OILS

COMMERCIAL VEHICLE LUBRICANTSHEAVY DUTY NATURAL GAS ENGINE OILS

Viscosity, ASTM D445 cSt at cSt at V.I. Pour Point,Product 40°C 100°C ASTM D2270 °C, ASTM D97

Diol 9 RD 40 141 14.7 104 -21Diol 9 RD 20W-40 135 15.3 118 -21

DIOL™ 9 RD Series are premium heavy duty crankcase lubricants for locomotive diesel engines. They meet the severe-service demands of the latest locomotive engines. The additive system is endorsed

by Electro-Motive Diesel (EMD) and General Electric (GE). It provides excellent engine protection and controls oil consumption to promote oil drain interval extensions.


Mobil Delvac CNG/LNG 15W-40 114 15.3 140 0.9 6.4 -27

IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES

Mobil GEO™ 15W-40 is formulated to protect trucks and buses running on Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG). This advanced medium ash formulation combines high quality base stocks and balanced additives to deliver excellent oxidation, nitration, and thermal stability for minimal combustion chamber ash deposits. Mobil GEO 15W-40 lubricates

with less varnish, sludge, and carbon build-up under the most severe operating conditions. Recommended for Cummins B and C Series and Detroit Diesel Series 50G engines and meets the performance requirements of Cummins CES 2007, Detroit Diesel 7SE272-9510 and API Service Category CD.


Mobil GEO 15W-40 15W-40 100 14.4 130 -27 215 5 0.5



63

Mobil Delvac™ Synthetic Gear Oils are synthetic drivetrain lubricants engineered to meet extended drain and warranty requirements. These products are for heavy duty drivetrains that require gear lubricants with relatively high viscosity and excellent load-carry-

ing capability and where extreme pressures and shock loading are expected. Mobil Delvac Synthetic Gear Oil 75W-90 and 80W-140 incorporate the latest technol-ogy in synthetic base stocks and advanced additives providing significant advantages over mineral gear oils.


Mobil Delvac Synthetic Gear 75W-90 120 15.9 140 -48 max 205Mobil Delvac Synthetic Gear 80W-140 310 31.2 139 -36 max 210


Mobil Delvac™ Synthetic Final Drive and Axle Oil 320 31.6 138 -45 max 246

COMMERCIAL VEHICLE LUBRICANTS HEAVY DUTY POWER TRANSMISSION FLUIDS

Mobil Delvac™ Synthetic Final Drive and Axle Oil is a high performance drivetrain lubricant that meets the requirements of the Caterpillar FD-1 standard. It is specifically engineered to provide optimum compo-nent life when used as recommended in off-highway truck and bulldozer final drives, axles, bevel gears, and differentials, especially those operating under high

loads and extreme temperatures. Advanced synthetic base oils and the latest additive technology combine to promote extended oil drain intervals and to prolong the life of bearings and gears. The synthetic base oil composition enables excellent performance in some of the harshest operating conditions at high temperatures and at temperatures as low as -35°C.

Mobil Delvac™ Synthetic Transmission Fluid 50 is a synthetic manual transmission lubricant engineered to meet extended drain and OEM warranty requirements. It provides year-round lubrication of manual transmis-sions in light to severe duty on- and off-highway appli-cations in a wide range of environments. Designed to

provide maximum protection and extended operating life to heavy duty transmissions. Compared to con-ventional sulphur-phosphorus gear oils, this lubricant provides significant advantages, including outstanding high temperature performance, oxidation stability, wear protection, and corrosion control.

Mobil Delvac™ Synthetic ATF is a synthetic fluid recommended by Allison Transmission, approved against the Allison TES-295 Specification. The fluid meets the demanding requirements of modern heavy duty automatic transmissions. The synthetic base oil composition enables excellent performance even in some of the harshest of operating conditions,

promoting outstanding gear shifting and power transfer. Compared to conventional ATF fluids, this fluid’s inherently high viscosity index and stability protects against thermal breakdown at high operating temperatures, while providing outstanding performance at sub-zero temperatures.

Viscosity, ASTM D445 cSt at cSt at V.I. Pour Point, Flash Point,Product 40°C 100°C ASTM D2270 ºC, ASTM D97 °C, ASTM D92

Mobil Delvac Synthetic Transmission Fluid 50 132 17.5 146 -45 221


Mobil Delvac Synthetic ATF 39 7.3 168 -54 236



Hydraulic FluidsMobil SHC™ 500 SeriesMobil DTE 10 Excel™Mobil Univis™ N-CMobil Nuto™ H-C

“Bumper-to-Bumper” Applications for Your Business*

GreasesMobil Epic™ EP MolyMobil Epic™ MQMobil Centaur™ Moly 1Mobilgrease XHP™ Mine SeriesMobil Unirex™ EP 2Mobil Unirex™ EP 1 Moly

Coolant/AntifreezeMobil Delvac™ Extended Life Coolant/AntifreezeMobil Delvac™ Extended Life 50/50 Coolant/AntifreezeMobil Delvac™ Extended Life 55/45 Coolant/AntifreezeMobil™ Heavy Duty SCA Precharged Coolant/AntifreezeMobil™ Heavy Duty SCA Precharged 50/50 Coolant/AntifreezeMobil™ Heavy Duty SCA Precharged 60/40 Coolant/AntifreezeMobil™ Heavy Duty SCA Precharged 55/45 Coolant/Antifreeze

Engine OilsMobil Delvac 1™ ESP 0W-40; 5W-40Mobil Delvac™ Elite 222 0W-30Mobil Delvac™ 1300 Super 15W-40; 10W-30

Gear OilsMobil Delvac™ Synthetic Gear Oil 75W-90; 80W-140Mobilube™ HD Plus MG 75W; 80W-90; 85W-140Mobilube™ HD Extra MG 75W; 80W-140

Transmission and Drivetrain LubricantsMobiltrans AST™ Extra 20WMobiltrans AST™Mobiltrans AST™ 30Mobiltrans HD™ 10W; 30; 50

Mobil Delvac™ Synthetic Final Drive & Axle OilMobil Delvac™ Synthetic ATFMobil Delvac™ Synthetic Transmission Fluid 50Mobilube™ XFD 50Mobil Hydraul™ ExtraMobil Hydraul™ 50; 56

*This is a general illustration to identify some of the key components and applications; the list of products is not intended as a speci�c recommendation for any particular OEM model. Off-highway applications are different from model to model and OEM to OEM. For speci�c OEM model recommendations, please contact your Imperial Representative.

66

COMMERCIAL VEHICLE LUBRICANTSHEAVY DUTY POWER TRANSMISSION FLUIDS

Mobilube™ HD LS 80W-90 is a high performance automotive lubricant formulated from select base oils and an advanced additive system specifically for limited-slip differentials. This lubricant is engineered for API GL-5 level performance in heavy duty limited-slip

differentials, axles, and final drives where extreme pressures and shock loading are expected. This product delivers exceptional chemical and thermal stability at elevated bulk oil temperatures.

Mobilube™ HD Extra MG 75W and 80W-140 are high performance commercial gear lubricants formulated from select base oils and an advanced additive system. These lubricants are engineered for heavy duty manual transmissions, axles, and final drives subject to severe service with shock loading. They provide excellent

chemical and thermal stability at elevated bulk oil temperatures, good performance at low temperatures, and protection against rust from water contamination and wet conditions. Mobilube Extra 80W-140 and Mobilube HD Extra 75W are recommended as an API GL-6 lubricant.

Mobilube™ XFD 50 and 60 high performance drivetrain lubricants are engineered to deliver optimal component life in Caterpillar final drives and axles when used as recommended. They are formulated from advanced base oils and the latest additive technology to protect bearings and gears from premature failure

due to fatigue. These lubricants deliver excellent perfor-mance in heavy duty commercial axles and final drives subject to extreme pressures and shock loading. They provide exceptional chemical and thermal stability at elevated bulk oil temperatures generated under heavy loads and/or high ambient temperatures.

Mobilube™ HD Plus MG 75W, 80W-90 and 85W-140 are high performance commercial gear lubricants formulated from select base oils and an advanced additive system. These lubricants are engineered for heavy duty transmissions, axles and final drives where extreme pressures and shock loading are expected.

They provide excellent chemical and thermal stability at elevated bulk oil temperatures, good performance at low temperatures, and good protection against rust from water contamination and wet conditions. They deliver excellent performance where API GL-5 or MT-1 lubricants are required.


Mobilube HD LS 80W-90 132 14.3 107 -27 208


Mobilube HD Plus MG 75W 92 15.8 184 -45 150Mobilube HD Plus MG 80W-90 139 14.5 103 -27 210Mobilube HD Plus MG 85W-140 333 25.4 99 -18 230


Mobilube™ HD Extra MG 75W 93 15.9 182 -48 150Mobilube™ HD Extra 80W-140 268 27.4 134 -33 160


Mobilube XFD 50 206 18.4 97 --24 250Mobilube XFD 60 334 25.2 97 -15 255

IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS



67

COMMERCIAL VEHICLE LUBRICANTS HEAVY DUTY POWER TRANSMISSION FLUIDS

Mobiltrans™ AST (All-Season Transmission) is a high performance drivetrain lubricant engineered to meet or exceed the requirements of Caterpillar’s TO-4M performance specifications for off-highway transmissions, drivetrains and hydraulic systems. This advanced technology lubricant provides clutch and brake compatibility and extended life that has

not been possible with previous formulations. Mobiltrans AST combines a blend of semi-synthetic base oils with an advanced additive system. The product provides all-season lubrication of all drivetrain components in light to severe duty off-highway equip-ment operating in a wide range of environments.

Mobiltrans™ AST 30 and Mobiltrans™ AST Extra 20 high performance multigrade transmission and drive train lubricants are uniquely designed to provide low temperature and multi-season service in powershift

transmissions, gearboxes, clutches, final drives and hydraulic systems. Mobiltrans AST 30 is recommended for temperatures as low -35°C; Mobiltrans AST Extra 20 can be used at -45°C.

Mobiltrans™ HD 10W, 30 and 50 are high performance heavy duty transmission and drivetrain lubricants engineered to meet or exceed the requirements of the rigorous Caterpillar TO-4 specification. This product line is uniquely designed to optimize the performance of powershift transmissions, gearboxes, and final drives. In hydraulic applications, they provide maximum

protection even in high pressure systems. Select base oils combine with an advanced additive system to deliver the precision needed to maximize produc-tivity in construction, quarrying and mining equipment operating in severe conditions. These products offer an advantage over mixed fleet engine oils and previously used lubricants meeting Caterpillar TO-2.


Mobiltrans AST 107 14.2 134 -39 222


Mobiltrans AST 30 57.6 10.5 173 -45 180 Mobiltrans AST Extra 20 32.9 7.5 206 -54 170


Mobiltrans HD 10W 42 6.3 96 -33 202Mobiltrans HD 30 100 11.2 97 -18 224Mobiltrans HD 50 195 18.0 100 -15 240



68

COMMERCIAL VEHICLE LUBRICANTSTRACTOR HYDRAULIC FLUIDS

COMMERCIAL VEHICLE LUBRICANTSRAILWAY

IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES

Mobil Hydraul™ high performance multipurpose tractor lubricants are for agriculture, forestry, mining and construction equipment where a common oil sump is used for transmission, differential, final drive, wet brake, wet clutch and hydraulic components. Advanced lubrication technology optimizes the performance of equipment operating in a wide range of environments and conditions. All grades are well suited for reducing wet brake chatter. Mobil Hydraul 56 is for systems

calling for a “heavier” viscosity fluid in summer operation or “all-season” use where temperatures are above -25°C. Mobil Hydraul 50 is recommended for year-round service in systems calling for a “lighter” viscosity fluid, and as a winter grade replacement for Hydraul 56 in temperatures as low as -35°C. Hydraul Extra is an all-season fluid suitable for the most severe applications across an operating temperature range of -35°C to 100°C.

Galcar All Year is formulated for the lubrication of railway car journal bearings and locomotive suspension bearings. It meets the specifications of major Canadian railways and the all-year specification of the American Association of Railways (AAR). High quality base

stocks combine with high performance additives to inhibit oxidation and promote long service life, high load-carrying capability, control of rust and corrosion, good water separation and low temperature fluidity.

Viscosity, ASTM D445 cSt at cSt at V.I. Pour Point, Flash Point,Product 40°C 100°C ASTM D2270 °C, ASTM D5949 °C, ASTM D92

Mobil Hydraul 50 34 7.25 181 -54 170 Mobil Hydraul Extra 43 9.6 218 -51 170 Mobil Hydraul 56 55 9.30 145 -42 200

Kinematic Viscosity Density cSt at cSt at V.I. Pour Point, Flash Point,Product @ 15°C kg/m 40°C 100°C ASTM D2270 °C, ASTM D5949 °C, ASTM D92

Galcar All Year 872 40 6.3 102 -39 225

3



69

COMMERCIAL VEHICLE LUBRICANTS COOLANT/ANTIFREEZE

Mobil Delvac™ Extended Life Coolant/Antifreeze – C Series feature a patented Hybrid and Organic Acid Technology (OAT) formula that protects cooling systems for 960,000 km on-highway use or 6 years / 12,000 hours of off-highway use when added as an initial fill and properly maintained. Designed for use

in on-highway truck, off-highway farm, marine, and stationary applications, including but not limited to Caterpillar, Detroit / MTU, GM Heavy Truck, Freightliner, PACCAR and Volvo Mack. Available in concentrate as well as 50/50 and 55/45 prediluted versions. Colour: Red

Mobil™ Heavy Duty SCA Precharged Coolant/ Antifreeze is a fully formulated traditional engine coolant for multi-vehicle fleets, including automotive, light duty and heavy duty diesel applications such as on-highway truck, off-highway and farm applications. It provides optimum protection against freezing, overheating, cavitation, erosion, corrosion and scale

for all heavy duty cooling system applications. Because it is precharged with a Supplemental Coolant Additive (SCA), Mobil Heavy Duty Precharged Coolant/Antifreeze requires no SCAs at initial fill and ensures proper chemistry at every top-off. Available in concen-trate as well as 60/40, 55/45, and 50/50 prediluted versions. Colour: Purple.



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES70

PASSENGER VEHICLE LUBRICANTS PASSENGER VEHICLE ENGINE OILS

PASSENGER VEHICLE LUBRICANTS PRODUCT PAGE

Passenger Vehicle Engine Oils Engine Oil Selection Chart ...................................... 71-72

Engine Oil Selection Star Chart ...................................73

Mobil 1™ Advanced Fuel Economy ............................. 74

Mobil 1™ ...................................................................... 74

Mobil 1™ ESP X1 0W-30 .............................................75

Mobil 1™ ESP Formula 5W-30 ....................................75

Mobil 1™ ESP Formula M 5W-40 ................................75

Mobil 1™ Extended Performance 5W-20,

5W-30 and 10W-30 ......................................................75

Mobil 1™ Turbo Diesel Truck 5W-40 ............................ 76

Mobil Super™ 1000 .....................................................76

Mobil Super™ 2000 .....................................................76

Mobil Super™ 3000 .....................................................76

Passenger Vehicle Drive Train Fluids Mobil 1™ Synthetic ATF ...............................................77

Mobil™ Dexron®-VI ATF...............................................77

Mobil™ Multi-Vehicle ATF ............................................77

Mobil ATF™ D/M ..........................................................77

Mobil ATF™ +4 ............................................................77

Mobil ATF™ 3309.........................................................77

Mobil 1™ Synthetic Gear Lube LS ...............................78

Motorcycle Oils Mobil 1™ Racing 4T ....................................................78

Passenger Vehicle Installer Greases .....................................................................................78



71

PASSENGER VEHICLE LUBRICANTS PASSENGER VEHICLE ENGINE OIL SELECTION CHART

Reco

mm

ende

d AP

I, IL

SAC,

GM

Ford

Bra

nd N

ame

Vi

scos

ity

Prod

uct D

escr

iptio

n Co

nsum

er A

pplic

atio

ns

& O

ther

Indu

stry

* AC

EA

Serv

ice

Fill

Serv

ice

Fill

MB

BMW

VW

Mob

il 1™

5W

-20

Boos

ted,

adv

ance

d sy

nthe

tic

Vehi

cles

that

requ

ire

GF-5

,SN

A1/B

1 de

xos

1®

X E

xten

ded

fo

rmul

a de

sign

ed fo

r tod

ay’s

5W-2

0. P

erfo

rman

ce

lo

nger

oil

chan

ge in

terv

als.

For u

se in

man

y do

mes

tic a

nd

im

porte

d ve

hicl

es.

Mob

il 1™

5W

-30

Boos

ted,

adv

ance

d sy

nthe

tic

Vehi

cles

that

requ

ire

GF-5

,SN

A1/B

1 de

xos

1®

X E

xten

ded

fo

rmul

a de

sign

ed fo

r tod

ay’s

5W

-30

or 1

0W-3

0.

Hond

a/Ac

ura

A5/B

5 P

erfo

rman

ce

lo

nger

oil

chan

ge in

terv

als.

HT0-

06

Fo

r use

in m

any

dom

estic

and

im

porte

d ve

hicl

es.

Mob

il 1™

10

W-3

0 Bo

oste

d, a

dvan

ced

synt

hetic

Ve

hicl

es th

at re

quire

GF

-5,S

N A1

/B1

Ext

ende

d

fo

rmul

a de

sign

ed fo

r tod

ay’s

10W

-30.

A5/B

5 P

erfo

rman

ce

lo

nger

oil

chan

ge in

terv

als.

For u

se in

man

y do

mes

tic a

nd

im

porte

d ve

hicl

es.

Mob

il 1™

0W

-20

Adva

nced

syn

thet

ic fo

rmul

a M

ost v

ehic

les

that

GF

-5,S

N A1

/B1

dexo

s 1®

X

desi

gned

for e

nhan

ced

fuel

sp

ecify

0W

-20

(new

er

ec

onom

y an

d co

ld w

eath

er

Toyo

tas

and

Hond

as),

perf

orm

ance

. 5W

-20

and

certa

in

hybr

ids.

Mob

il 1™

0W

-40

Adva

nced

syn

thet

ic

Man

y Eu

rope

an v

ehic

les.

SN

, Por

sche

A3

/B3

229.

3 /

Long

life-

01

502.

00 /

form

ulat

ion

desi

gned

to m

eet

A4

0, N

issa

n A3

/B4

229.

5

505.

00

th

e re

quire

men

ts o

f man

y

GT-R

, Chr

ysle

r

Eu

rope

an v

ehic

les.

MS1

0850

,

Ch

rysl

er

M

S107

25

M

obil

1™

5W-2

0 Ad

vanc

ed s

ynth

etic

form

ula

Vehi

cles

that

requ

ire

GF-5

,SN

A1/B

1 de

xos

1®

X

de

sign

ed to

mee

t the

5W

-20

requ

irem

ents

of n

ewer

dom

estic

and

impo

rt ve

hicl

es.

Mob

il 1™

5W

-30

Adva

nced

syn

thet

ic fo

rmul

atio

n Ve

hicl

es th

at re

quire

GF

-5,S

N A1

/B1

de

xos

1®

X

de

signe

d to

mee

t the

requ

irem

ents

5W

/30.

Ho

nda/

Acur

a A5

/B5

of m

any

dom

estic

, inc

ludi

ng

Corv

ette

app

rove

d.

HT0-

06

GM

, and

impo

rted

vehi

cles

.

M

obil

1™

5W-5

0 Hi

gher

vis

cosi

ty, a

dvan

ced

Po

rsch

e.

SN, P

orsc

he

A3/B

3

229.

1 /

High

50

1.01

/

sy

nthe

tic fo

rmul

a de

sign

ed fo

r

A40

A3/B

4

22

9.3

Perf

orm

ance

50

5.00

perf

orm

ance

veh

icle

s.

Dies

el O

il

Mob

il 1™

10

W-3

0 Ad

vanc

ed s

ynth

etic

form

ula

Ve

hicl

es th

at re

quire

GF

-5,S

N A1

/B1

desi

gned

for d

omes

tics

and

10

W-3

0.

A5

/B5

impo

rts.

* For

a fu

ll lis

t of I

ndus

try

and

orig

inal

equ

ipm

ent m

anuf

actu

rer a

ppro

vals

by

prod

uct a

nd v

isco

sity

see

the

Prod

uct D

ata

Shee

ts a

vaila

ble

onlin

e at

mob

il.ca

/pds



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES72

PASSENGER VEHICLE LUBRICANTS PASSENGER VEHICLE ENGINE OIL SELECTION CHART

* For

a fu

ll lis

t of I

ndus

try

and

orig

inal

equ

ipm

ent m

anuf

actu

rer a

ppro

vals

by

prod

uct a

nd v

isco

sity

see

the

Prod

uct D

ata

Shee

ts a

vaila

ble

onlin

e at

mob

il.ca

/pds

Reco

mm

ende

d AP

I, IL

SAC,

GM

Ford

Bra

nd N

ame

Vi

scos

ity

Prod

uct D

escr

iptio

n Co

nsum

er A

pplic

atio

ns

& O

ther

Indu

stry

* AC

EA

Serv

ice

Fill

Serv

ice

Fill

MB

BMW

VW

Mob

il 1™

15

W-5

0 Bo

oste

d, h

ighe

r vis

cosi

ty,

HT/H

S ap

plic

atio

ns.

SN

A3/B

3

ad

vanc

ed s

ynth

etic

form

ula

Raci

ng a

nd F

lat t

appe

t

desi

gned

for p

erfo

rman

ce

appl

icat

ions

.

ve

hicl

es.

Mob

il 1™

Turb

o 5W

-40

Adva

nced

syn

thet

ic fo

rmul

a

Mos

t die

sel a

pplic

atio

ns.

CJ-4

, CI-4

, E7

Die

sel T

ruck

desi

gned

for d

iese

l pow

ered

in

clud

ing

engi

nes

with

CI

-4 P

lus,

SN,

pick

-ups

and

truc

ks.

dies

el p

artic

ulat

e fil

ters

. Ca

terp

illar

ECF-

2 an

d EC

F-3

Mob

il 1™

ESP

0W

-30

Ad

vanc

ed s

ynth

etic

form

ulat

ion

High

per

form

ance

AC

EA C

2, C

3

229.

31 /

L

ongl

ife-0

4 X

1

expe

rtly

engi

neer

ed fo

r ga

solin

e an

d di

esel

22

9.51

/

ex

trem

e co

nditi

ons

engi

nes

foun

d in

the

22

9.52

la

test

pas

seng

er c

ars,

SU

Vs a

nd li

ght v

ans.

Mob

il 1™

ESP

5W

-40

Adva

nced

syn

thet

ic fo

rmul

a Lo

w S

APS

(sul

phat

ed a

sh,

229.

31 /

For

mul

a M

desi

gned

spe

cific

ally

for

phos

phor

ous

sulp

hur)

.

229.

51

pass

enge

r car

die

sels

that

hav

e Av

aila

ble

at m

ost

dies

el p

artic

ulat

e fil

ters

. M

erce

des

Benz

dea

lers

.

Mob

il 1™

ESP

5W

-30

Adva

nced

syn

thet

ic fo

rmul

a Lo

w S

APS

(sul

phat

ed a

sh,

SN, P

orsc

he

C3, C

2

22

9.31

/ Lo

nglif

e-04

50

4.00

/ F

orm

ula

de

sign

ed s

peci

fical

ly fo

r ph

osph

orou

s su

lphu

r).

C30,

Chr

ysle

r

229.

51

50

7.00

pass

enge

r car

die

sels

that

hav

e

MS-

1110

6,

di

esel

par

ticul

ate

filte

rs.

PSA

B712

290,

PSA

B712

297,

JASO

DL-

1

Mob

il 1™

10

W-4

0 Ad

vanc

ed s

ynth

etic

form

ulas

Al

l mot

orcy

cles

whe

re

SN, J

ASO

MA1

Rac

ing

4T

de

sign

ed s

peci

fical

ly fo

r 10

W-4

0 is

spe

cifie

d 20

06

mot

orcy

cles

whe

re c

lutc

h

lubr

icat

ion

is a

lso

impo

rtant

.



73

PASSENGER VEHICLE PRODUCT LISTING BY APPLICATION

Choose the Best Protection for Your Vehicle



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES74


Mobil 1™ 0W-30 Advanced Fuel Economy is an advanced high performance synthetic engine oil designed to help deliver outstanding engine protection and enhanced fuel economy. Mobil 1 0W-30 Advanced

Fuel Economy meets or exceeds the requirements of the latest industry standards and outperforms our conventional oils. Recommended for SAE 0W-30, 5W-30 and 10W-30 applications.

Mobil 1™ 0W-40. Mobil 1 is the world’s leading syn-thetic motor oil brand delivering our ultimate perfor-mance and protection. Mobil 1 0W-40 European Car Formula (North America) or Protection Formula (rest of the World) is engineered for the latest gasoline and

diesel (without Diesel Particulate Filters or DPFs) engine technology. It provides exceptional cleaning power, wear protection and overall performance and keeps your engine running like new in all driving conditions.

Mobil 1™ 5W-20 and 5W-30 are advanced synthetic engine oils designed to keep your engine running like new by delivering exceptional wear protection, cleaning power and overall performance. Mobil 1 5W-20 and

5W-30 meet or exceed the industry’s toughest stan-dards and outperform conventional oils. Mobil 1 lubri-cants are standard equipment (factory filled) in many new cars, including select high performance vehicles.

Mobil 1™ 5W-50 advanced synthetic engine oil promotes exceptional wear protection for a smooth driving experience every time. It meets or exceeds industry and manufacturers’ standards for high perfor-mance turbocharged, supercharged gasoline and

diesel multi-valve fuel injected engines. It is especially suited for high speed and severe service associated with stop and go driving. For racing or everyday driving, Mobil 1 5W-50 delivers heavy duty performance and protection for an outstanding driving experience.

Mobil 1™ 10W-30 advanced synthetic engine oil helps keep engines running like new by providing exceptional cleaning power, wear protection and overall perfor-mance. It meets or exceeds latest industry standards

for modern gasoline engines. Mobil 1 lubricants are standard equipment (factory filled) in many new cars, including select high performance vehicles.

Mobil 1™ 15W-50 is an advanced synthetic engine oil that delivers exceptional wear protection for a smooth driving experience. It meets or exceeds industry and manufacturers’ standards for high performance turbo-charged, supercharged gasoline and diesel multi-valve

fuel injected engines. This winning, race-proven technology is especially suited for a wide variety of motorsports, towing, and other severe-service applications. Mobil 1 15W-50 helps deliver outstanding performance and protection for the winning edge.

Viscosity, ASTM D445 cSt at cSt at V.I. Pour Point Flash Point, Product* 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92

Mobil 1 0W-20 Advanced Fuel Economy 44.8 8.7 173 -48 224 Mobil 1 0W-30 Advanced Fuel Economy 62.9 10.9 166 -50 226Mobil 1 0W-40 75 13.5 185 -48 230Mobil 1 5W-20 49.8 8.9 1 160 -43 230Mobil 1 5W-30 61.7 11.0 172 -42 230Mobil 1 5W-50 108 17.5 180 -45 231Mobil 1 10W-30 63.2 10.1 146 -42 232Mobil 1 15W-50 125 18 160 -39 232

typical values, actual values may vary

Mobil 1™ 0W-20 Advanced Fuel Economy is an ad-vanced high performance synthetic engine oil designed to help deliver outstanding engine protection and enhanced fuel economy. Mobil 1 0W-20 Advanced Fuel

Economy meets or exceeds the requirements of the latest industry standards and outperforms conventional oils. Mobil 1 0W-20 Advanced Fuel Economy is recom-mended for SAE 0W-20 and 5W-20 applications.

* vehicle owners should consult their service manuals for the recommended oil viscosity grade



75


Mobil 1™ ESP X1 0W-30 advanced synthetic engine oil helps provide exceptional cleaning power, wear protection and overall performance. Expertly engineered to help prolong the life and maintain the efficiency of

emission systems in diesel and gasoline powered automobiles, this product meets or exceeds leading industry and car manufacturers’ standards for newer diesel and gasoline powered passenger car engines.

Mobil 1™ ESP Formula M 5W-40 is an advanced performance synthetic engine oil designed to help provide exceptional cleaning power, wear protection and overall performance. It is engineered to help

prolong the life and maintain the efficiency of emission systems in both diesel and gasoline powered vehicles requiring an oil approved against Mercedes Benz 229.31 and MB 229.51 specifications.

Mobil 1™ Extended Performance 5W-20, 5W-30 and 10W-30 are advanced synthetic engine oils designed to keep your engine running like new and to protect critical engine parts for 25,000 km between

oil changes. Mobil 1 Extended Performance is specially formulated to help provide outstanding protection during today’s longer oil change intervals.

Viscosity, ASTM D445 HTHS Viscosity cSt at cSt at Sulfated Ash, MRV mPa’s at 150°C TBN, mg KOH/g,Product 40°C 100°C wt% ASTM D874 at -40°C ASTM D4683 ASTM D2896

Mobil 1 ESP X1 0W-30 65 12.1 0.8 24,800 3.5 7.6


Mobil 1 Extended Performance 5W-20 49.6 8.9 161 -42 230Mobil 1 Extended Performance 5W-30 59.8 10.6 169 -40 230Mobil 1 Extended Performance 10W-30 63.7 10.2 147 -39 232

Mobil 1™ Turbo Diesel Truck 5W-40 is a synthetic performance heavy duty diesel engine oil that helps to extend engine life while providing long drain capability and helps improve fuel economy for modern diesel

engines operating in severe applications. State-of-the-art lubricant technology helps deliver exceptional perfor-mance in modern low emission engines, including refrig-erated units, as well as older, well-maintained engines.

Viscosity, ASTM D445 cSt at cSt at Flash Point, Product 40°C 100°C V.I. °C, ASTM D92

Mobil 1 Turbo Diesel Truck 5W-40 97.9 14.5 153 215


Mobil 1 ESP Formula M 5W-40 81 13.4 167 -39 236



76


Mobil Super™ 1000 motor oils are formulated from quality base stocks combined with modern perfor-mance additives to give your engine the protection and the performance you expect under a wide variety of operating conditions. These products meet or

exceed ILSAC GF-5 and API SN. Those claims are backward compatible with earlier performance levels such as API SM, SL, and SJ. The American Petroleum Institute (API) classifies these products as “resource conserving.”

Viscosity, ASTM D445 cSt at cSt at Pour Point, Flash Point Spec. GravityProduct 40°C 100°C V.I. CCS, cP MRV, cP °C, ASTM D97 °C, ASTM D92 kg/l at 15.6°C

Mobil Super™ 1000 5W-20 49 8.6 152 5,880 @ -30°C 26,900 @ -35°C -31 221 0.860Mobil Super™ 1000 5W-30 62 10.4 157 6,440 @ -30°C 30,300 @ -35°C -33 220 0.860Mobil Super™ 1000 10W-30 69 10.6 141 6,040 @ -25°C 18,700 @ -30°C -33 222 0.869

Mobil Super™ 2000 oils combine synthetic and conventional high quality base oils with friction reducing additives to help provide long engine life and outstand-

ing protection for vehicles with more than 120,000 km. Formulated with seal conditioner, these oils help prevent leaks and reduce oil consumption.

Viscosity, ASTM D445 cSt at cSt at Pour Point, Flash Point Spec. Gravity Product 40°C 100°C V.I. °C, ASTM D97 °C, ASTM D92 kg/l at 15.6°C

Mobil Super 2000 5W-20 46.9 8.3 153 -36 218 0.8590Mobil Super 2000 5W-30 61.4 10.4 159 -36 222 0.8590Mobil Super 2000 10W-30 66.3 10.4 145 -36 220 0.8667

Mobil Super™ 3000 synthetic motor oils help provide long engine life and outstanding protection in vehicles of all ages, even under severe conditions and across a wide range of operating temperatures. These oils outperform our conventional synthetic blended prod-ucts, provide outstanding protection against sludge, engine rust and corrosion and optimum viscosity and fluidity across a broad range of temperatures.

Mobil Super 3000 0W-20 and 5W-30 are classified by The American Petroleum Institute (API) as “resource conserving” and meet or exceed ILSAC GF-5. Those claims are backward compatible with earlier performance levels such as API SN, SM, SL, and SJ and previous LSAC categories. Mobil Super 3000 Formula D1 5W-30 is approved against General Motors dexos1®.

Viscosity, ASTM D445 cSt at cSt at Pour Point, Flash Point Spec. GravityProduct 40°C 100°C V.I. °C, ASTM D97 °C, ASTM D92 kg/l at 15.6°C

Mobil Super 3000 0W-20 44.9 8.6 173 -42 238 0.848Mobil Super 3000 Formula D1 5W-30 65.1 11.2 167 -39 239 0.8378

IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS



77

PASSENGER VEHICLE LUBRICANTS PASSENGER VEHICLE DRIVE TRAIN FLUIDS

Mobil 1™ Synthetic ATF is a multi-vehicle, synthetic fluid designed to meet the demanding requirements of modern passenger vehicles. It helps to improve

and extend transmission efficiency, smooth shifting performance and helps improve fuel economy.

Mobil™ Dexron®-VI ATF is a high performance, synthet-ic blend ATF formulation that meets or exceeds the strin-gent requirements of GM’s DEXRON-VI specification

and provides warranty protection for model year 2006 and later GM vehicles. It also delivers improved perfor-mance in older GM vehicles requiring DEXRON fluid.

Viscosity, ASTM D445 cSt at cSt at Flash Point, Product Colour 40°C 100°C V.I. °C, ASTM D92

Mobil Dexron-VI ATF Red 29.5 5.83 145 220

Mobil™ Multi-Vehicle ATF is a premium lubricant for car and truck automatic transmissions and other applications & recommended by Imperial for use in applications that require an automatic transmission fluid satisfying Ford Mercon and Mercon V perfor-

mance levels. Recommended by Imperial for use in applications requiring Dexron III. Mobil Multi-Vehicle ATF is not recommended for applications requiring Ford MERCON LV, MERCON SP, or GM DEXRON VI.


Mobil Multi-Vehicle ATF Red 34.1 7.42 193 180

Mobil ATF™ D/M provides the excellent oxidation and friction stability, anti-wear properties, and low-tempera-ture fluidity desired for most automatic transmissions. It

is recommended for applications requiring: GM DEXRON®, Ford MERCON® and Allison C-4 or GM DEXRON® III H.

Mobil ATF™ +4 is specially formulated to ensure opti-mal performance in Chrysler automatic transmissions. Its unique additive package provides the proper fric-

tional properties, excellent low-temperature fluidity and dependable wear protection required in applications where a Chrysler MS-9602 type fluid is recommended.

Mobil ATF™ 3309 is a high performance lubricant that meets original equipment manufacturers’ spec-

ifications for use in certain slip-controlled lock-up automatic transmissions.


Mobil ATF D/M Red 35.3 7.4 183 356


Mobil ATF +4 Red 34.4 7.5 192 392


Mobil ATF 3309 Red 33 7.1 181 198

Viscosity, ASTM D445 cSt at cSt at Pour Point, Flash Point, Product Colour 40°C 100°C V.I. °C, ASTM D97 °C, ASTM D92

Mobil 1 Synthetic ATF Red 36.3 7.4 176 -51 220



Mobil 1™ Synthetic Gear Lube LS is a high performance, synthetic, multipurpose automotive gear lubricant. It is designed to meet the requirements

of modern passenger vehicles in many types of operating conditions, including limited slip applications and to deliver outstanding power transfer performance.

Viscosity, ASTM D445 cSt at cSt at Pour Point, Flash Point, Product 40°C 100°C V.I. °C, ASTM D97 °C, ASTM D92

Mobil 1 Synthetic Gear Lube LS 75W-90 99 15.2 142 -39 150 Mobil 1 Synthetic Gear Lube LS 75W-140 170 24.4 175 -48 207

78

PASSENGER VEHICLE LUBRICANTS PASSENGER VEHICLE DRIVE TRAIN FLUIDS

PASSENGER VEHICLE LUBRICANTS MOTORCYCLE OILS

PASSENGER VEHICLE LUBRICANTS PASSENGER VEHICLE INSTALLER GREASES

Mobil 1™ Synthetic Grease .......................................91Mobil Ronex™ MP .....................................................91 Mobilgrease XHP™ 220 Series .................................97

Mobil 1™ Racing 4T is an advanced performance synthetic motorcycle oil whose unique synthetic struc-ture delivers advantages beyond conventional products of similar viscosities. Conventional base oils become lighter in viscosity as temperature increase, which forces the use of thickeners to help the lubricant maintain viscosity as temperatures increase. These thickeners can shear down and lose their thickening

capacity in engines or transmissions. Synthetic fluids require significantly less thickener to achieve a multi-grade viscosity rating and, in some cases, require no thickener at all. As a result, synthetic formulations tend to be very shear-stable and provide a solid, protective oil film for engine bearings, piston rings, transmission gears and other critical engine parts.

Viscosity, ASTM D445 cSt at cSt at Pour Point, Flash Point, Product 40°C 100°C V.I. °C, ASTM D97 °C, ASTM D92

Mobil 1™ Racing 4T 10W-40 82.0 13.1 161 -45 212

IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES

Additional Passenger Vehicle Drive Train Fluids

Mobilube™ HD Plus 80W-90 and 85W-140 ..............66

Mobilube™ HD Plus MG 75W ...................................66

Mobilube™ HD LS 80W-90 .......................................66

Mobilube™ HD Extra 80W-140 .................................66

Mobilube™ HD Extra MG 75W ..................................66




1 888 968-3776


IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES80

MARINE LUBRICANTS LISTING BY APPLICATION

MARINE LUBRICANTS PRODUCT PAGE

Crosshead Engine Oils Mobilgard™ 570 ...................................................................... 81

Mobilgard™ 560 VS ................................................................ 81

Mobilgard™ 525 ...................................................................... 81

Mobilgard™ 300 ...................................................................... 81

Trunk Piston Engine Oils Mobilgard™ ADL Series .......................................................... 82

Mobilgard™ 12 Series ............................................................. 82

Mobilgard™ 410 NC (No Chlorine) .......................................... 82

Mobilgard™ M30, M40 and M50 ............................................. 82

Marine Hydraulic Oil Mobil SHC Aware™ H Series .................................................. 83

Marine Grease Mobil SHC Aware™ Grease EP 2 ........................................... 83

For more information, please refer to exxonmobil.com/marinelubes-en


http://www.exxonmobil.com/marinelubes-en


Viscosity, ASTM D445 Spec. Gravity,

cSt at cSt at V.I. Pour Point, Flash Point, kg/l at 15°C TBN, mg KOH/g,Product 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 ASTM D1298 ASTM D2896

Mobilgard 560 VS 222 20 104 -9 256 0.937 60



Mobilgard 570 222 20 104 -9 256 0.937 70



Mobilgard 525 226 20 102 -9 286 0.909 25



Mobilgard 300 111 12 97 -12 266 0.889 5

Mobilgard™ 560 VS is a high performance marine diesel engine cylinder oil for crosshead engines run-ning on heavy fuel with sulphur levels from 0.5-4.0%. Advanced technology delivers superb protection from corrosive and adhesive wear at the higher tempera-

tures and pressures found in modern crosshead engines. The outstanding performance of this oil has been demonstrated at the highest peak firing pressures and liner temperatures.

Mobilgard™ 570 is a premium quality, extra high performance, marine diesel engine cylinder oil. The outstanding performance of Mobilgard 570 has been demonstrated at the elevated peak firing pressures and liner temperatures found in modern marine two stroke engines. It has an optimum viscosity of over 20 cSt. at 100ºC and low volatility to ensure excellent lubricant distribution and oil film retention. Through

the use of unique synthetic thickener technology and a balanced formulation, the high viscosity and low volatility is attained with little or no use of bright stock which can create deposit formation due to poor thermal stability. Mobilgard 570 has demonstrated outstanding ring and liner protection and cleanliness under sus-tained operation with fuel sulphur levels down to 1.5%.

MARINE LUBRICANTS CROSSHEAD ENGINE OILS

81

Mobilgard™ 525 is a marine diesel engine cylinder oil for crosshead engines running low and ultra low sulphur distillate fuels and meets the requirements of MAN and Wartsila engines. Designed to protect in

extreme environments, Mobilgard 525 has an optimum viscosity of 20 cSt at 100ºC and low volatility to ensure lubricant distribution and oil film retention and help protect engine parts.

Mobilgard™ 300 is an extra high performance system oil for crosshead diesel engines. High quality paraffinic base oils and a balanced additive system provide excellent protection for the severe operating conditions of recent design, high output crosshead marine diesel

engines. This oil has sufficient alkalinity to neutralize strong acids entering the crankcase via fuel sulphur combustion. Enhanced load-carrying ability helps reduce wear in heavily loaded bearings.




cSt at V.I. Pour Point, Flash Point, kg/l at 15°C TBN, mg KOH/g,Product 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 ASTM D1298 ASTM D2896

Mobilgard ADL 30 11.5 117 -30 230 0.889 12Mobilgard ADL 40 14.7 112 -21 239 0.892 12


cSt at V.I. Pour Point, Flash Point, kg/l at 15°C TBN, mg KOH/g,Product 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 ASTM D1298 ASTM D2896

Mobilgard 312 12.0 100 -9 266 0.896 15Mobilgard 412 14.5 10 -9 272 0.899 15

Mobilgard™ ADL Series increased dispersancy engine oils are for high BMEP medium and high speed diesel engines operating on distillate and MDO fuels. These oils are available in SAE 30 and 40 grades to suit most marine engine viscosity requirements. A special balance of detergent and dispersant delivers increased resistance to cylinder liner lacquer formation

in severe-service applications and promotes removal of sludge and deposits. Mobilgard ADL Series oils min-imize oil consumption associated with liner lacquering, improves overall engine cleanliness and help increase overhaul intervals. Excellent load-carrying properties minimize piston ring and liner wear, and make these lubricants suitable for marine gearing applications.

MARINE LUBRICANTS TRUNK PISTON ENGINE OIL

IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES82

Mobilgard™ 12 Series high performance diesel engine oils are for trunk piston engines operating on low sulphur distillate fuels in marine and industrial applications. They deliver excellent resistance to

oxidation and viscosity increase over long service, along with outstanding water separation and excellent protection against corrosion.

Mobilgard™ 410 NC (No Chlorine) engine oil is a non-zinc and non-chlorine lubricant specifically formulated with an Electro Motive Diesel (EMD) and General Electric (GE) endorsed additive tech-nology to meet requirements of heavily loaded diesel engines manufactured by EMD and used in marine applications. Its alkalinity reserve provides excellent

corrosion protection when using fuels containing up to 0.05 wt.% sulfur, even though metals such as steel, copper, silver and bronze are present. It has excellent lubricating properties and has high viscosity index to help reduce oil consumption, and is optimized for low and ultra low sulfur fuel use and is LNG, biofuel and Tier IV engine ready.

Mobilgard™ M30, M40 and M50 are three series of extra high performance engine oils for severe residual fuelled medium speed diesel engines in marine and stationary power applications. The number in each name refers to TBN. These market leading trunk piston engine oils employ potent additives and deliver out-

standing residual fuel compatibility for excellent clean-liness, especially in the crankcase, camshaft, ring belt and piston undercrowns. They demonstrate excellent high temperature oxidation and thermal stability, low volatility, high load-carrying properties and protection against corrosion.

Viscosity, ASTM D445 Spec. Gravity, cSt at V.I. Pour Point, Flash Point, kg/l at 15°C TBN, mg KOH/g,Product 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 ASTM D1298 ASTM D2896

Mobilgard 410 NC 14.4 104 -18 255 0.894 10

Viscosity, ASTM D445 Spec. Gravity, cSt at V.I. Pour Point, Flash Point, kg/l at 15°C TBN, mg KOH/g,Product 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 ASTM D1298 ASTM D2896

Mobilgard M330 12.0 100 -6 244 0.907 30Mobilgard M430 14.0 100 -6 250 0.907 30 Mobilgard M40 14.0 100 -6 242 0.915 40 Mobilgard M50 14.0 100 -6 228 0.922 50




cSt at cSt at V.I. Pour Point, Flash Point,Product 40°C 100°C ASTM D2270 °C, ASTM D97 °C, ASTM D92

Mobil SHC Aware H 32 32 6.0 140 -30 185 Mobil SHC Aware H 46 46 8.2 140 -30 185 Mobil SHC Aware H 68 68 10.37 140 -30 185

Viscosity, ASTM D445 Colour, NLGI Thickener Dropping Point,°CProduct cSt at 40°C Visual Grade Type ASTM D2265

Mobil SHC Aware Grease EP 2 150 Amber 2 Calcium/Lithium >160

Mobil SHC Aware™ H Series lubricants are high performance, anti-wear hydraulic oils for modern high pressure hydraulic systems that meet the U.S. Environmental Protection Agency (EPA) 2013 Vessel General Permit (VGP) guidelines for “environmentally acceptable lubricants.” They provide excellent wide temperature range performance above and beyond

the capabilities of non-synthetic environmentally ac-ceptable oils. Mobil SHC Aware H Series oils are spe-cially formulated from ester base stocks and provide exceptional anti-wear and film strength characteristics necessary for hydraulic systems operating under high load and high pressures.

Mobil SHC Aware™ Grease EP 2 is a high perfor-mance synthetic grease designed specifically for appli-cations which are environmentally sensitive and meets the requirements of the U.S. Environmental Protection Agency (EPA) 2013 Vessel General Permit (VGP).

This leading product is readily biodegradable and virtu-ally non-toxic grease and is formulated based on biode-gradable saturated ester base oils and a lithium/calcium soap thickener. It does not emulsify and has excellent water wash and salt water corrosion resistance.

MARINE LUBRICANTS MARINE HYDRAULIC OIL

MARINE LUBRICANTS MARINE GREASE



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES84

AVIATION LUBRICANTS LISTING BY APPLICATION

AVIATION LUBRICANTS PRODUCT PAGE

Grease Mobil™ Aviation Grease SHC 100........................................... 85

Mobilgrease™ 28 .................................................................... 85

Mobilgrease™ 33 .................................................................... 85

Exxon HyJet™ IV-A Plus ......................................................... 85

Mobil Aero™ HFA .................................................................... 86

Jet Oil Mobil Jet Oil™ II ...................................................................... 86

Mobil Jet Oil™ 254 .................................................................. 86

Exxon™ Aviation Oil Elite 20W-50 ........................................... 86




cSt at cSt at Product Colour 40°C 100°C Dropping Point, °C Water Washout, wt%

Mobil Aviation Grease SHC 100 Red 100 14.5 280 –


cSt at cSt at Product Colour 40°C 100°C Dropping Point, °C Water Washout, wt%

Mobilgrease 28 Dark Red 30 5.7 308 1


cSt at cSt at Water Washout, Water Washout, Product Colour 40°C 100°C Dropping Point, °C 1 Hr at 38 ºC, wt% 1 Hr at 79 ºC, wt%

Mobilgrease 33 Blue Green 12.5 3.2 246 1 6

Kinematic Viscosity

cSt at cSt at cSt at cSt at V.I. Pour Point, Flash Point, Spec. GravityProduct -53.9°C 37.8°C 98.9°C 127.6°C ASTM D2270 °C, ASTM D97 °C, ASTM D92 kg/l at 25ºC

Exxon HyJet IV-A Plus 1320 10.6 3.6 2.6 280 <-62 175 0.996

Mobil™ Aviation Grease SHC 100 high performance synthetic grease combines the unique features of a polyalphaolefin (PAO) synthetic base fluid and high quality lithium complex soap thickener system. The thickeners deliver a high dropping point, excellent resistance to water wash, and tenacious structural stability. The synthetic base oil and select additives provide outstanding protection against wear, rust,

corrosion, and high temperature degradation. The wax-free properties of the base oil promote low temperature mobility/pumpability and low starting and running torque values. Traction property is considerably lower than that of mineral oil, enabling temperature reductions in the load zone of rolling element bearings. Mobil Aviation Grease SHC 100 is the product of choice for aircraft wheel bearing applications.

Mobilgrease™ 28 is a high performance, wide temperature, anti-wear grease combining the unique features of a polyalphaolefin (PAO) synthetic base fluid with an organo-clay (non-soap) thickener. Consistency is between an NLGI No. 1 and No. 2 grease, with outstanding performance over a wide temperature

range. The wax-free nature of the synthetic base fluid, together with its high viscosity index compared to min-eral oils, provide excellent low temperature pumpability, very low starting and running torque, and help reduce operating temperatures in the load zone of rolling element bearings.

Mobilgrease™ 33 is a high performance lithiumcomplex grease designed for general purpose aircraft use. Consistency is between NLGI grades 1 and 2. Mobilgrease 33 utilizes a 100% polyalphaolefin base

oil and premium additives to help ensure outstanding lubrication performance over a wide range of tempera-tures and operating conditions.

Exxon HyJet™ IV-A Plus is a fire-resistant phosphate ester hydraulic fluid for use in commercial aircraft. Our best performing Type IV fluid approaches many of the performance capabilities of Type V fluids, including

high temperature stability, fluid life, low density and rust protection. Meets specifications of all major aircraft manufacturers and SAE AS1241.

AVIATION LUBRICANTS GREASE



Mobil Aero™ HFA is for aircraft systems requiring hydrocarbon-based hydraulic fluids. This low viscosity fluid contains shear-stable VI (viscosity index) improvers

for excellent low temperature performance, combined with good anti-wear performance and chemical stability.

Mobil Jet Oil™ II is a high performance aircraft-type gas turbine lubricant formulated with a highly stable synthetic base fluid and a unique chemical additive system. This combination delivers outstanding thermal

and oxidative stability to resist deterioration and deposit formation in both the liquid and vapour phases, as well as excellent resistance to foaming. Effective operating range: -40 °C to 204 °C.

Mobil Jet Oil™ 254 is a third-generation, extra high performance, synthetic aircraft-type gas turbine lubri-cant engineered to meet the performance requirements of gas turbine engines in commercial and military aircraft. This product is formulated from a specially prepared, hindered-ester base stock and fortified with a unique chemical additive system. The result is

outstanding thermal and oxidation stability that resists deterioration and deposit formation while maintaining the physical characteristics required by builder and military specifications. The physical properties of Mobil Jet Oil 254 are similar to those currently available, earlier-generation gas turbine lubricants. The effective operating range is between -40°C and 232°C.

Exxon™ Aviation Oil Elite 20W-50 is a premium qual-ity, semi-synthetic, ashless-dispersant aviation piston engine oil. It is formulated with highly refined mineral base oils combined with polyalphaolefin synthetic base oil and ashless performance additives for outstanding

engine cleanliness and protection from wear and corrosion. This oil meets the requirements of all opposed piston engine manufacturers across a wide range of climatic conditions.

AVIATION LUBRICANTS GREASE

Viscosity, ASTM D445 Spec. Gravity cSt at cSt at V.I. Pour Point, Flash Point, kg/l at 15.6ºCProduct 40°C 100°C ASTM D2270 °C, ASTM D97 ºC, COC, ASTM D92 ASTM D1298

Mobil Aero HFA 14.0 5.2 370 -60 max 93 min 0.872

Viscosity, ASTM D445 Spec. Gravity cSt at cSt at Pour Point, Flash Point, kg/l at 15.6ºCProduct 40°C 100°C °C, ASTM D97 ºC, COC, ASTM D92 ASTM D1298

Mobil Jet Oil 254 26.4 5.3 -62 254 1.0044

Kinematic Viscosity

cSt at cSt at V.I. Pour Point, Flash Point,Product 40°C 100°C ASTM D2270 °C, ASTM D97 ºC, COC, ASTM D92

Exxon Aviation Oil Elite 20W-50 180 16.3 min, 21.9 max 130 -27 258

IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES86


cSt at cSt at Pour Point, Flash Point,Product 40°C 100°C °C, ASTM D97 °C, ASTM D92

Mobil Jet Oil II 27.6 5.1 -59 270

AVIATION LUBRICANTS JET OIL




1 888 968-3776


IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES88

GREASE PRODUCT LISTING BY APPLICATION

Decoding Many Mobil Grease XHP 222 SpecialMobil GreaseProduct Names Master Product Product ISO/ Identifier Brand Brand Family NLGI (Moly/Application)

Product Brands vs Lith – Lithium Complex Temp – Clay

Thickener Type Polyrex – Polyurea Lux – Lithium

Centaur – Calcium Sulphonate Grease – Multiple technologies

ISO / NLGI The first two numbers correspond to the first two

numbers of the base oil ISO Viscosity Grade (e.g. 220).

The last number corresponds to the NLGI grade.

Identifier Moly content: Special – 0.75 or 1%; Moly – 3%; Mine – 5%

Mobil Grease Core Industrial Application Mobil SHCTM, Mobilgrease XHPTM

Product Product FamiliesFamilies

Select Specialty Industrial Mobil SHC PolyrexTM, Mobil PolyrexTM, Application Product Families Mobil Centaur XHPTM

Core Commercial Vehicle Application Mobil DelvacTM Xtreme, Mobilgrease XHPTM,

(On / Off Highway) Product Families Mobil CentaurTM

Core Personal Vehicle Installer Greases Mobil 1TM Synthetic Grease,

Mobilgrease XHPTM 222

Mobil GreaseBalanced Performance



89


GREASE PRODUCT PAGE

Agriculture Equipment Mobilgrease XHP™ 220 Series ................................................97

Mobil Epic™ Series ..................................................................98

Mobil Unirex™ EP Series .........................................................99

Mobil Delvac™ Xtreme Grease .............................................. 100

Automotive Mobil 1™ Synthetic Grease ......................................................91

Mobil Ronex™ MP....................................................................91

Couplings Mobilgrease™ XTC ..................................................................92

Mobilux™ EP 111 .....................................................................92

Electric Motors Mobil Polyrex™ EM ..................................................................93

Mobil Unirex™ N ......................................................................93

Environmentally Aware Mobil SHC™ Grease 100 EAL Series ......................................93

Food Industry (NSF H-1) Mobil SHC Polyrex™ 462 .........................................................94

Mobilgrease™ FM 101..............................................................94

Gears – Enclosed, Semi-Fluid Mobil Marvelube™ EP 9F ........................................................94

Nebula™ EP Special ................................................................94

Gears – Open Mobil Geargard™ .....................................................................95

Mobil Dynagear™ Series .........................................................95

High Temperature – Clay Thickened Mobiltemp SHC™ 32 ................................................................96

Mobiltemp™ Series ..................................................................96

Marine Mobil SHC Aware™ Grease EP 2 ............................................96

Multi-Purpose Mobilith SHC™ Series .............................................................97

Mobilgrease XHP™ 220 Series ................................................97

Mobilgrease XHP™ 460 Series ................................................97

Mobil Centaur XHP™ 460 Series .............................................98

Mobilux™ EP Series ................................................................98

Mobil Epic™ Series ..................................................................98

Mobil Unirex™ EP Series .........................................................99

Mobil™ Argon EP .....................................................................99

Mobil™ Arcan 1 ........................................................................99



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES90


GREASE PRODUCT PAGE ..........................................................................................Off-Highway Heavy Duty Equipment Mobil Centaur™ Moly Series .................................................. 100

and On-Highway Trucking Mobil Delvac™ Xtreme Grease .............................................. 100

Mobilgrease XHP™ Mine ....................................................... 100

Paper Machines Mobilith SHC™ PM ................................................................ 101

Mobil Centaur XHP™ 221 ...................................................... 101

Pneumatic Tools / Air-line Lubricated Mobil Arox™ NM 000 ............................................................. 101

Railway Arapen™ RB 320 ................................................................... 102

Galena™ Tramo 3735 ............................................................ 102

Drilling DDR Grease ........................................................................... 102

Specialty Synthetic Mobil SHC™ PF 462 .............................................................. 103

Mobil Beacon™ 325 ............................................................... 103

Threads Thredkote™ 706 ..................................................................... 103

Z-50 Pipe Dope ...................................................................... 104

Wind Turbines Mobil SHC™ Grease 460 WT ................................................ 104

Wire Ropes / Natural Core Wire Rope Dressing ............................................................... 104



91

Viscosity, ASTM D445 Water Washout, Colour, NLGI Soap cSt at cSt at Dropping Point,°C ASTM D1264,Product ISO VG Visual Grade Type 40°C 100°C ASTM D2265 at 79°C, %

Mobil 1 Synthetic Grease 220 Red 2 Li-Complex 220 23.8 288 6

Viscosity, ASTM D445 Colour, NLGI Thickener Dropping Point,°CProduct cSt at 40°C Visual Grade Type ASTM D2265

Mobil Ronex MP 115 Green 2 Li-Complex 280

Mobil 1™ Synthetic Grease is an NLGI No 2 high performance automotive lubricant formulated with synthetic base fluid, lithium complex soap thickener and additives that deliver optimum extreme pressure properties, excellent resistance to water wash and outstanding protection against rust and corrosion. The thickener system provides a high dropping point;

the synthetic base oil provides excellent performance at high and low temperatures (-40°C to 150°C). Excellent structural stability and high shear-stability make this an outstanding automotive grease. It meets requirements of the National Lubricating Grease Institute (NLGI) performance classification GC-LB.

Mobil Ronex™ MP is a premium quality multipurpose grease recommended for a wide range of automotive and industrial applications. Formulated with a mineral oil base fluid combined with a lithium complex soap thickener and performance enhancing additives, this lubricant delivers excellent performance over a wide temperature range, including moderate load-carrying

and extreme pressure properties. This grease resists water, protects against corrosion and provides good oxidation and thermal stability. Ronex MP is compatible with most elastomer seal materials and meets the requirements of the National Lubricating Grease Institute (NLGI) performance classification GC-LB.

Additional Automotive Grease

Mobilgrease XHP™ 220 ..........................................97

GREASES AUTOMOTIVE



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES92

GREASES COUPLINGS

Mobilgrease™ XTC is an high performance product designed for high speed coupling applications. Formu-lated with a high viscosity mineral base oil and an extremely effective, heavy duty additive package, this lubricant provides low bleed as well as high temperature stability, properties critical to modern

coupling lubrication and protection. The base oil and extreme pressure (EP) / anti-wear (AW) additive package work to reduce friction wear from sliding tooth contact, deliver rust and corrosion protection, and high temperature stability for this leading edge product. Meets AGMA CG-1 and CG-2 coupling specifications.

Mobilux™ EP 111 is an high performance grease primarily designed for AGMA CG-3 couplings. It is specifically formulated to help protect against wear, even in heavily loaded misaligned low speed gear couplings. Mobilux EP 111 is a lithium hydroxystearate

lubricant formulated with an extremely heavy (viscous) mineral base oil. This NLGI 1 Grade grease is fortified by an oil soluble molybdenum (Moly) additive and a very effective corrosion inhibitor.

Colour, Dropping Point,°C Viscosity, ASTM D445Product Visual Grade Type ASTM D2265 cSt at 40°C

Mobilgrease XTC Dark Brown 1 Lithium 215 680

Colour, NLGI Thickener Dropping Point,°C Viscosity, ASTM D445Product Visual Grade Type ASTM D2265 cSt at 100°C

Mobilux EP 111 Black 1 Lithium 180 45

Additional Couplings Grease

Mobil Unirex™ EP Series ........................................99



93

GREASES ELECTRIC MOTORS

GREASES ENVIRONMENTALLY AWARE

Mobil Polyrex™ EM premium grease is specially formulated for electric motor bearings. Outstanding grease life promotes long-life, high temperature lubrication of ball and roller bearings for long electric

motor life. The advanced polyurea thickener formula-tion delivers increased durability versus conventional polyurea greases when subjected to mechanical shear forces.

Mobil Unirex™ N greases are premium quality, lithium complex products suitable for high temperature service in rolling element bearings. The lithium complex thick-ener resists softening and running out of bearings at

temperatures up to 190°C. These versatile greases are recommended for a wide range of industrial applications and are particularly well suited for electric motor lubrication.

Viscosity, ASTM D445 Colour, NLGI cSt at cSt at Base Oil V.I., Dropping Point,°C Product Visual Grade 40°C 100°C ASTM D2270 ASTM D2265

Mobil Polyrex EM Blue 2 115 12.2 95 260

Colour, NLGI Thickener Viscosity, ASTM D445 Base Oil V.I., Dropping Point,°C Product Visual Grade Type cSt at 40°C ASTM D2270 ASTM D2265

Mobil Unirex N 2 Green 2 Li-Complex 115 95 280Mobil Unirex N 3 Green 3 Li-Complex 115 95 235

Mobil SHC™ Grease 100 EAL Series are high performance greases designed specifically for environ-mentally sensitive applications. These virtually non-toxic greases are formulated from a biodegradable synthetic ester base oil and a lithium soap thickener. The wax-free

nature of the synthetic base fluid, together with its low traction coefficient, delivers excellent low temperature pumpability and very low starting and running torque – a significant benefit since many environmentally sensi-tive applications are located outdoors.

Base Oil Colour, NLGI Thickener Dropping Point,°C Water Washout, at 79°C,Product ISO VG Visual Grade Type ASTM D2265 ASTM D1264, Wt. %

Mobil SHC Grease 101 EAL 100 Tan 1 Lithium 180 8.0Mobil SHC Grease 102 EAL 100 Tan 2 Lithium 180 6.5

Additional Electric Motor Grease

Mobilith SHC™ Series ...........................................97



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES94

Mobil SHC Polyrex™ 462 is a unique combination of synthetic oil, polymer enhancement and a balanced additive system designed to bring solutions to tough lubrication problems. Formulated with advanced Polyurea thickener technology, this advanced lubricant provides high temperature performance while carrying a full NSF H1 registration. Mobil SHC Polyrex 462 is

highly resistant to water and has excellent corrosion protection for equipment in wet, humid environments and applications where water wash downs are frequent. It resists oxidation and loss of structural stability, often enhancing productivity by enabling lubrication intervals to be safely extended.

GREASES FOOD INDUSTRY (NSF H-1)

GREASES GEARS – ENCLOSED, SEMI-FLUID

Viscosity, ASTM D445 Water Washout, Water Spray-Off NLGI Thickener 40°C, 100°C, Dropping Point,°C 79°C, ASTM D1264, ASTM D4049, Product Grade Type cSt cSt ASTM D2265 % Weight Loss % Weight Loss

Mobil SHC Polyrex 462 2 Polyurea 460 40 270 5 30

Mobil Marvelube™ EP 9F is widely used in industrial and automotive applications requiring economical lubrication under moderate service conditions. This water-resistant grease works well over an operating temperature range of -30°C to 50°C. Extreme pressure

properties provide good film strength and resistance to wear. Marvelube EP 9F is suitable for steering gearboxes, gear cases of hand tools, chain drives and centralized grease dispensing equipment.

Nebula™ EP Special is recommended for heavily loaded worm gear reducers or enclosed gearunits whose design or worn seals may cause excessive leakage with conventional gear oils.

This product is specifically recommended for underground mining equipment in severe service. Excellent anti-rust properties help protect equipmentsubjected to water contamination.

Mobilgrease™ FM 101 is a high performance multi-pur-pose grease designed specifically for food processing machinery. Mobilgrease FM 101 is formulated with com-ponents meeting the requirements of CFR 178.3570,

Chapter 21, and is NSF registered as an H1 classified lubricant. It is manufactured in facilities registered to the requirements of ISO 21469, helping to ensure that the highest levels of product integrity are maintained.


Mobilgrease FM 101 White 1 Aluminum Complex 260 100

Colour, Thickener Base Oil ViscosityProduct Visual Type Structure cSt at 40°C

Marvelube EP 9F Amber Calcium Semi-fluid 57.0

Colour, Base Oil ViscosityProduct Visual Thickener Type cSt at 40°C

Nebula EP Special Amber Calcium Sulphonate 100

Additional Semi-Fluid Greases

To obtain the current ‘Reference Listing of Accepted Construction Materials, Packaging Materials and Non-Food Chemical Products’ (including lubricants), please visit the Canadian Food Inspection Agency (CFIA) website.

Mobilith SHC™ Series .............................................97 Mobilux EP™ 023 .....................................................98



95

Mobil Geargard™ is a high performance, semi- synthetic lubricant designed for use on open gears in grinding mills (rod, ball and SAG). A high flash point non-chlorinated diluent facilitates dispensing through typical mill auto-greasing systems. The solvent is

designed to evaporate after application, leaving an adhesive and cohesive high viscosity lubricating film. Potent additives provide extreme pressure (EP) protection and excellent control of rust and corrosion.

Mobil Dynagear™ Series premium performance open gear lubricants provide outstanding protection of heav-ily loaded open gear sets exposed to a wide range of operating conditions. Formulated with lithium thickener technology, high performance additives and high

viscosity semi-synthetic base fluids, these lubricants synergistically provide a protective film that adheres tenaciously. Mobil Dynagear Series gear lubricants provide excellent dispensability without the use of chlorinated or hydrocarbon solvents.

Viscosity, ASTM D445 Colour, Flash Point,°C cSt at 40°C cSt at 100°CProduct Visual Structure with diluent with diluent w/o diluent

Mobil Geargard Black Smooth 110 5000 1500

GREASES GEARS – OPEN

Colour, NLGI Thickener Molybdenum Dropping Point,°C Viscosity, ASTM D445Product Visual Grade Type Disulphide, Wt. %, Structure ASTM D2265 cSt at 40°C

Mobil Dynagear 600 SL Black 1 Lithium >2.0 Smooth 175 620Mobil Dynagear 800 Extra Black 0 Lithium >2.0 Smooth, Semi-fluid 198 680Mobil Dynagear 2000 Black 0 to 00 Lithium >2.0 Smooth, Semi-fluid 193 2000Mobil Dynagear 4000 Black 00 Lithium >2.0 Smooth, Semi-fluid 213 4000



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES96

GREASES HIGH TEMPERATURE – CLAY THICKENED

Mobiltemp SHC™ 32 is a high performance anti-wear grease primarily intended for high temperature appli-cations. Synthetic base oils deliver excellent resistance to thermal/oxidative degradation. The organo-clay non-soap thickener provides high temperature structural

stability and a high dropping point, for outstanding high temperature protection. The wax-free synthetic base fluids with their high viscosity index also provide outstanding lubrication at low temperatures.

Mobiltemp™ Series greases are high performance clay-thickened products designed for plain and antifric-tion bearings operating at low speed and high tempera-ture or under cycling conditions from ambient to high temperatures. The clay thickener, unlike traditional soap thickeners, does not soften at high temperatures. These greases are based on a high quality, high viscosity

mineral oil and specially formulated to provide low volatility and excellent resistance to oxidation at high temperatures, along with resistance to water washout and good anti-wear performance under heavy loads and low speeds. Mobiltemp 78 also contains molybde-num disulphide (Moly) for added anti-wear protection.


Mobiltemp SHC 32 Red 1.5 Clay 260+ 32


Mobiltemp 2 Amber 2 Clay 300 460Mobiltemp 78 Grey-black 1 Clay 300 460

GREASES MARINE

Mobil SHC Aware™ Grease EP 2 is a high perfor-mance synthetic grease designed specifically for appli-cations which are environmentally sensitive and meets the requirements of the U.S. Environmental Protection Agency (EPA) 2013 Vessel General Permit (VGP). This

leading product is readily biodegradable and virtually non-toxic grease and is formulated based on biode-gradable saturated ester base oils and a lithium/calcium soap thickener. It does not emulsify and has excellent water wash and salt water corrosion resistance.

Colour, NLGI Thickener Dropping Point,°C Viscosity, ASTM D445 Product Visual Grade Type ASTM D2265 cSt at 40°C

Mobil SHC Aware Grease EP 2 Amber 2 Calcium/Lithium >160 150



97

GREASES MULTI-PURPOSE

Mobilgrease XHP™ 220 Series greases are intended for a wide variety of applications and severe operating conditions. These extended service lithium complex greases were designed to outperform our conventional products through cutting edge, proprietary, lithium complex manufacturing technology. They deliver excellent high temperature performance with superb

adhesion, structural stability and resistance to water contamination. These greases have a high level of chemical stability and offer excellent protection against rust and corrosion. They feature high dropping points and a maximum recommended operating temperature of 140°C. Base oil viscosity is ISO VG 220.

Mobilgrease XHP™ 460 Series greases are intended for a wide variety of heavy duty applications and operating conditions. These extended service lithium complex greases were designed to outperform our conventional products through cutting edge, proprietary, lithium complex manufacturing technology. They deliver excellent high temperature performance with superb adhesion, structural stability and resistance to water contamination. These greases have a high level of

chemical stability and offer excellent protection against rust and corrosion. These greases feature high dropping points and a maximum recommended operating temperature of 140°C. Mobilgrease XHP 462 Moly is fortified with 3% molybdenum disulphide to provide enhanced EP (extreme pressure) and AW (anti-wear) protection in heavily loaded and high sliding applications.

Colour, NLGI Thickener Molybdenum Viscosity, ASTM D445 Dropping Point,°CProduct Visual Grade Type Disulphide, Wt. % cSt at 40°C ASTM D2265

Mobilgrease XHP 221 Dark Blue 1 Li-Complex – 220 280Mobilgrease XHP 222 Dark Blue 2 Li-Complex – 220 280Mobilgrease XHP 222 Special Grey-Black 2 Li-Complex 0.75 220 280

Mobilith SHC™ Series greases are high performance products designed for a wide variety of applications at temperature extremes. They combine the unique features of synthetic base fluids with those of a high quality lithium complex thickener. The wax-free nature of synthetic fluids and the low coefficient of traction (compared with mineral oils) provide excellent low temperature pumpability and very low starting and running torque. These products offer the potential for

energy savings and can reduce operating temperatures in the load zone of spherical roller and ball bearings. The lithium complex thickener contributes excellent adhesion, structural stability and resistance to water. The greases have a high level of chemical stability and are formulated with special additive combinations to deliver excellent protection against wear, rust and corrosion, and to provide operating viscosity at high and low temperatures.

Water Washout, Colour, NLGI Thickener Viscosity, ASTM D445 Dropping Point,°C ASTM D1264,Product Visual Grade Type cSt at 40°C ASTM D2265 79°C, % Wt. Loss

Mobilith SHC 007 Red 00 Li-Complex 460 – – Mobilith SHC 100 Red 2 Li-Complex 100 265 6Mobilith SHC 220 Red 2 Li-Complex 220 265 3Mobilith SHC 460 Red 1.5 Li-Complex 460 265 3Mobilith SHC 1500 Red 1.5 Li-Complex 1500 265 2.5

Colour, NLGI Thickener Molybdenum Viscosity, ASTM D445 Dropping Point,°CProduct Visual Grade Type Disulphide, Wt. % cSt at 40°C ASTM D2265

Mobilgrease XHP 461 Dark Blue 1 Li-Complex – 460 280Mobilgrease XHP 462 Dark Blue 2 Li-Complex – 460 280Mobilgrease XHP 462 Moly Grey 2 Li-Complex 3 460 280



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES98


Mobil Epic™ Series are premium quality, semi-syn-thetic all-weather greases that deliver excellent lubri-cation and wear protection at temperatures as low as -50°C and as high as 150°C. They are recommended for multi-service applications in plain and anti-friction bearings, gears, slides and other situations where friction reduction and low wear are required. Epic EP Moly offers additional protection in applications involving heavy loads or slow reciprocating motion

under load. Epic MQ is particularly recommended for centralized lubrication systems in open-pit mining, as well as severe-service, low temperature applications in forestry and construction. It is fortified with 5 percent molybdenum disulphide, as required by some equip-ment manufacturers. Epic greases have a long history of excellent performance in the toughest applications and under extreme temperature conditions.

Molybdenum Colour, NLGI Thickener Disulphide Dropping Point,°C Viscosity, ASTM D445Product Visual Grade Type Content, Wt. % ASTM D2265 cSt at 40°C

Mobil Epic EP 102 Red 1.5 Li-Complex 0 260 130Mobil Epic EP Moly Grey-Black 1.5 Li-Complex 3 260 130Mobil Epic MQ Grey-Black 0.5 Li-Complex 5 230 60

Mobil Centaur XHP™ 460 Series is a premium family of greases formulated with advanced calcium sulpho-nate thickener technology, which carries both inherent rust protection and extreme pressure (EP) properties. Relative to conventional soap-base thickeners (lithium, aluminum, calcium), calcium sulphonate excels in

water saturated environments, providing rust protection between long re-lubrication intervals. The inherent EP properties exhibit great stability in the presence of water, providing a balance between wear protection and resistance to corrosion.

Water Washout, Water Spray Colour, NLGI Thickener Viscosity, ASTM D445 Dropping Point,°C ASTM D1264, Resistance,Product Visual Grade Type cSt at 40°C ASTM D2265 1 hr. at 79°C, % ASTM D4049, mass %

Mobil Centaur XHP 461 Amber 1 Calcium Sulphonate 460 275 1.0 25Mobil Centaur XHP 462 Amber 2 Calcium Sulphonate 460 275 0.5 20

Mobilux™ EP Series lithium hydroxystearate greases are formulated to deliver extra protection against wear, rusting and water washout. They are particularly well

suited for applications in moist or wet conditions. Mobilux EP Series includes one general purpose grease and one special duty semi-fluid lubricant.


Mobilux EP 2 Brown 2 Lithium 190 160Mobilux EP 023 Brown 000 Lithium – 320



99


Mobil™ Argon EP greases are high quality, shear stable products suitable for use in both plain and anti-friction bearings lubricated by an automatic centralized dispensing system. Argon EP greases are widely used to lubricate mining equipment, bolt and nut formers, vane spindles of hydraulic turbines and a wide range of other machinery serviced by automatic dis-

pensing equipment. They are useful over an operating temperature range of 0°C to 95°C. Argon EP 1 is an excellent choice for severe roller bearing service calling for an NLGI No.1 grease. Argon EP greases contain an extreme pressure additive, have a 21 kg Timken OK Load and are recommended where bearings are shock loaded or operating under heavy load conditions.

Mobil™ Arcan 1 is a white filler-type grease widely used in bearings and mechanisms to combat severe water contamination. This grease has good adhesion to metal under wet conditions; it stays in place and maintains a lubricating film to protect metal surfaces from corrosion for extended intervals. As a result,

Arcan 1 is well suited to such applications as printing machines, laundry and dry cleaning equipment and lubrication of office equipment. It is not recommended for wheel bearings, electric motor bearings or other high speed, grease packed anti-friction bearings. Operating temperature range is -5°C to 110°C.

Colour, NLGI Thickener Dropping Point,°C Viscosity, ASTM D445 Product Visual Grade Type ASTM D2265 cSt at 40°C cSt at 100°C

Mobil Arcan 1 White 1 Lithium 185 100.0 10.0

NLGI Thickener Dropping Point,°C Viscosity, ASTM D445Product Grade Type ASTM D2265 cSt at 40°C

Mobil Argon EP 0 0 Calcium 135 175 Mobil Argon EP 1 1 Calcium 135 175

Mobil Unirex™ EP Series are extremely versatile long-life premium performance greases. Their unique formulation protects equipment over a very wide temperature range. Unirex greases are shear and oxidation stable, protect against rust and corrosion and resist softening at elevated temperatures. Unirex Lotemp EP is recommended for winter conditions that require low operating or dispensing limits. Unirex Lotemp Moly and Unirex EP 1 Moly offer performance

characteristics similar to Unirex Lotemp EP and Unirex EP 1 greases respectively; each adds the extreme pressure protection of molybdenum disulphide (Moly). Unirex greases meet the challenges of demanding applications in such industries as transportation, manufacturing, construction, mining, logging, cement, marine and paper-making, where grease must perform well in a multitude of severe applications.

Colour, NLGI Thickener Operating Temp. Dropping Point,°C Viscosity, ASTM D445Product Visual Grade Type Range,°C ASTM D2265 cSt at 40°C

Mobil Unirex EP 0 Green 0.5 Li-Complex -35 to 110 190 68Mobil Unirex EP 1 Green 1 Li-Complex -30 to 160 280 220Mobil Unirex EP 2 Green 2 Li-Complex -30 to 160 300 220Mobil Unirex EP 0 Moly Grey-Black 0.5 Li-Complex -35 to 110 190 68Mobil Unirex EP 1 Moly Grey-Black 1 Li-Complex -30 to 150 280 220Mobil Unirex Lotemp EP Green 1.5 Li-Complex -55 to 110 260 10Mobil Unirex Lotemp Moly Grey-Black 1.5 Li-Complex -55 to 110 260 10



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES100

GREASES OFF-HIGHWAY HEAVY DUTY EQUIPMENT AND ON-HIGHWAY TRUCKING

Mobil Centaur™ Moly Series are premium quality greases formulated with advanced calcium sulphonate thickener technology. Unlike conventional soap-base thickeners (lithium, aluminum, calcium), calcium sulphonate delivers outstanding resistance against the effects of water washout, water spray-off and corrosion.

Fortified with 3% molybdenum disulphide (Moly) to complement a robust extreme pressure (EP) additive system, these greases are particularly well suited to the demanding requirements of heavy duty truck chassis, construction and mining equipment, and heavily load industrial bearings.

Mobil Delvac™ Xtreme Grease is an high perfor-mance extreme pressure lubricant. It exhibits excellent resistance to softening and provides good adhesion and cohesion, protection against wear and shock loads, and resistance to high temperature oxidation and rust. Mobil Delvac Xtreme Grease is recommended for use in heavy duty trucks, especially hinge and bucket pins,

U-joints, and fifth wheels. It is also recommended for plain and anti-friction bearings in construction and mining vehicles operating in severe service and weather conditions. It is also recommended for heavily loaded industrial bearings. Recommended temperature range: -20°C to +175°C.

Mobilgrease XHP™ Mine lubricants are specifically designed for extra heavy duty off-highway and mining equipment. These greases have excellent extreme pressure and anti-wear properties, along with excep-tional adhesion, very good resistance to water washout and spray-off, with extended service capabilities under

harsh conditions. They deliver superior performance in bucket pins, pivot pins and heavily loaded chassis components. Mobilgrease XHP 100 Mine and 320 Mine are especially well suited for central lubrication systems in mining and other off-highway equipment requiring an NLGI 0 Grade grease.

Water Spray Molybdenum Water Washout, Resistance, Colour, NLGI Thickener Disulphide, Viscosity, ASTM D445 Dropping Point,°C ASTM D1264, ASTM D4049, Product Visual Grade Type Wt. % cSt at 40°C ASTM D2265 1 Hr at 79°C, % mass %

Mobil Centaur Moly 1 Grey 1 Calcium Sulphonate 3 320 288 1.0 25Mobil Centaur Moly 2 Grey 2 Calcium Sulphonate 3 320 280 1.0 20

Water Washout, Colour, NLGI Thickener Viscosity, ASTM D445 Dropping Point,°C ASTM D1264, Product Visual Grade Type cSt at 40°C ASTM D2265 1 Hr at 79°C, %

Mobil Delvac Xtreme Grease Orange 2 Li-Complex 320 260 6

Water Washout, Water Sprayoff, Colour, NLGI Thickener Molybdenum Viscosity, ASTM D445 Dropping Point,°C ASTM D1264, ASTM D4049, Product Visual Grade Type Disulphide, Wt. % cSt at 40°C ASTM D2265 79°C, % Loss % Loss

Mobilgrease XHP 100 Mine Gray-Black 0 Li-Complex 5 100 200 – –Mobilgrease XHP 320 Mine Gray-Black 0 Li-Complex 5 320 270 – –Mobilgrease XHP 321 Mine Gray-Black 1 Li-Complex 5 320 270 10 28Mobilgrease XHP 322 Mine Gray-Black 2 Li-Complex 5 320 270 2 16

Mobilgrease XHP™ 220 Series ...............................97

Mobilgrease XHP™ 460 Series ...............................97

Mobil Centaur XHP™ 460 Series ............................98

Mobil Epic™ Series .................................................98

Mobil Unirex™ EP Series ........................................99

Additional Off-Highway Heavy Duty Equipment and On-Highway Trucking Greases



101

GREASES PAPER MACHINES

GREASES PNEUMATIC TOOLS/AIR-LINE LUBRICATED

Mobilith SHC™ PM high performance greases are designed specifically for severe-service paper machine applications, including those in extreme temperature environments with exposure to different qualities of water. These lubricants combine the unique features of a synthetic base fluid with a high quality lithium complex thickener. The wax-free synthetic base fluid delivers excellent low temperature pumpability and

low starting and running torque when compared to non-synthetic oil products of the same viscosity; its high viscosity index ensures excellent film protection at high temperatures. The lithium complex thickener contributes excellent adhesion, structural stability and enhanced resistance to water. A special additive system resists rust, corrosion and oxidation and helps protect against wear.

Mobil Centaur XHP™ 221 is recommended for rolling element bearings in machinery operating at high temperatures where resistance to water washing and corrosion is important. Such applications include

wet-end paper machine bearings and heavily loaded industrial ball and roller bearings, including those in steel mills and mining.

Water Washout, Colour, NLGI Thickener Viscosity, ASTM D445 Dropping Point,°C ASTM D1264, Product Visual Grade Type cSt at 40°C ASTM D2265 79°C, % Loss

Mobilith SHC PM 220 Off-White 1.5 Li-Complex 220 275 2Mobilith SHC PM 460 Off-White 1.5 Li-Complex 460 275 3

Water Washout Colour, NLGI Thickener Viscosity, ASTM D445 Dropping Point,°C at 79°C ASTM D, Product Visual Grade Type cSt at 40°C ASTM D2265 1264, Wt. %

Mobil Centaur XHP 221 Brown 1.5 Calcium Sulphonate Complex 220 318 1

Mobil Arox™ NM 000 is an extreme pressure, semi-fluid grease designed specifically to provide a mist-free, non-toxic environment for air-line lubricated pneumatic tools, including rock drills, jackhammers, drifters, wagon drills, chippers, tampers, riveters,

impact tools and pavement breakers. Low-odour, friction-and-wear-reducing additives also have emulsi-fying properties and help protect metal surfaces from corrosion and rust.

Colour, NLGI Thickener Viscosity, ASTM D445 Product Visual Grade Type cSt at 40°C

Arox NM 000 Amber 000 Calcium 140

Additional Paper Machine Greases

Mobilgrease XHP™ 460 Series ............................ 97

Mobil Unirex™ EP Series ..................................... 99



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES102

GREASES RAILWAY

GREASES DRILLING

Arapen™ RB 320 is a long-life grease developed for the roller bearings of railroad car journals where no provision is made for in-service relubrication. It has high oxidation stability and is highly resistant to chem-ical deterioration that might produce acids or deposits detrimental to bearing life. It has exceptional ability to

withstand shear, i.e. retain consistency after prolonged working, as in the churning action of an anti-friction bearing. Arapen RB 320 maintains good seal perfor-mance, a significant requirement for shop-to-shop wheel service. It also resists heat, rust and structural change in the presence of water.

Galena™ Tramo 3735 is a sulphur-phosphorusextreme pressure traction-motor gear lubricantdesigned for all locomotives, including the newest,

high horsepower per axle units. It delivers excellentprotection in severe temperatures, summer and winter, for effective all-season lubrication.

DDR Grease is a very tacky and adhesive lubricating grease, formulated to stay in place in severe-service diamond drilling operations. The primary function of a drill rod grease is to reduce friction of the drill rod against the walls of the hole. This can be a considerable task when long lengths of pipe weave in the drill hole.

At the same time, drill rods and joints may be washed by the sludge water used to force rock particulate upwards from the hole. DDR Grease is recommended for lubrication of diamond drill rods, on the surface or underground. It is normally applied by brush or hand and smeared over the drill rods where they are stacked.


Arapen RB 320 Light Amber 1.5 Calcium-Lithium 180 14.7

Colour, Thickener Viscosity, ASTM D445 Product Visual Type cSt at 100°C

Galena Tramo 3735 Black Lithium 200.0


DDR Grease Tan 3 Barium Complex 170 320.0



103

GREASES SPECIALTY SYNTHETIC

GREASES THREADS

Mobil SHC™ PF 462 grease is a long-life, severe- service lubricant for bearings, valves, seals and other applications requiring oxidation stability and lubrication performance at high temperatures. Formulated with per-fluoropolyether thickened with polytetrafluoroethylene,

Mobil SHC PF 462 provides dependable performance up to 240˚ C and has excellent lubricity, corrosion resistance, thermal and oxidative stability and chemical inertness.

Mobil Beacon™ 325 is a high performance grease specifically formulated for precision equipment oper-ating at moderate and low temperatures. Formulated with a synthetic base oil of extremely low viscosity and low volatility plus a lithium soap thickener, Beacon 325 delivers good mechanical stability, high resistance to

water and extremely high oxidation stability. As the base oil viscosity is low and the viscosity index of the fluid is high, the grease has excellent low temperature properties, including low starting and running torque at very cold temperatures and good pumpability.

Thredkote™ 706 is a simple soap grease containing graphite and metallic fillers such as lead, zinc and copper. It is designed for the lubrication of threads on casings, tubing and line joints in the oil drilling industry

and has been used successfully in Canada for many years. It is also used in the connection of high pressure steam lines and non-potable water lines.

Viscosity, ASTM D445 Water Washout, Water Spray-Off, NLGI cSt at cSt at Dropping Point,°C 79°C, ASTM D1264, ASTM D4049, Product Grade 40°C 100°C ASTM D2265 % Loss % Weight Loss

Mobil SHC PF 462 2 440 42 258 0.94 5


Mobil Beacon 325 Tan 2 Lithium 180 12

Penetration, Colour, NLGI Viscosity, ASTM D445 mm/10 @ 25°CProduct Visual Grade Dropping Point,°C cSt at 40°C % Graphite worked 60 strokes

Thredkote 706 – 1 91 – 18 330



IND

US

TR

IAL

CO

MM

ER

CIA

LP

AS

SE

NG

ER

MA

RIN

EA

VIA

TIO

NG

RE

AS

ES104

GREASES THREADS

GREASES WIND TURBINES

GREASES WIRE ROPES

Mobil SHC™ Grease 460 WT is a high performanceproduct especially suited to meet or exceed thedemanding requirements of wind turbine applicationsat temperature extremes. The wax-free nature of the synthetic base fluids and their low coefficient oftraction provide excellent low temperature pumpability

and very low starting and running torque. The lithiumcomplex thickener contributes excellent adhesion,structural stability and resistance to water. The greasehas a high level of chemical stability. Special additive combinations provide excellent protection against wear,rust and corrosion at high and low temperatures.

Wire Rope Dressing is an all-season, multi-purpose lubricant for hoist drum wire ropes in underground mining, dragline or electro-mechanical shovel oper-ations. At ambient temperatures between -40°C and 50°C, wire ropes are protected by a tenacious film that adheres firmly to the rope. Wire Rope Dressing

is formulated with non-asphaltic mineral base stocks, which minimize peeling, cracking and flaking off in cold weather. It contains molybdenum disulphide and solid graphite lubricant as well as additives to resist water and protect wire rope from rust and corrosion.

Water Washout, Colour, NLGI Thickener Viscosity, ASTM D445 Dropping Point,°C ASTM D1264,Product Visual Grade Type cSt at 40°C ASTM D2265 Loss at 79°C, % wt

Mobil SHC Grease 460 WT Red 1.5 Li-Complex 460 255 10

Z-50 Pipe Dope is an anti-seize compound recom-mended for a wide variety of applications. In oil field operations, it is used on the threads of new drill pipe and can also be applied as a sealing compound on the threads of semi-permanent joints, as when casing is set. In automotive and industrial applications,

Z-50 Pipe Dope is recommended for bolts, nuts and threaded fittings where tightness of the joint and ease of removal are desired. This product meets or exceeds the requirements of API recommended practice 7A1 for Rotary Shouldered Connection Thread Compounds. Its operating temperature range is -15°C to 150°C.

Colour, NLGI Dropping Point,°C Viscosity, ASTM D445 Product Visual Grade ASTM D2265 cSt at 40°C

Z-50 Pipe Dope Grey-Black 1 91 12

Colour, Thickener Dropping Point,°C Viscosity, ASTM D445 Product Visual Structure Type ASTM D2265 cSt at 40°C

Wire Rope Dressing Black Smooth Lithium 205 320



APPENDICES

-148.0 -100 -73.3 -130.0 -90 -67.8 -112.0 -80 -62.2 -94.0 -70 -56.7 -76.0 -60 -51.1 -58.0 -50 -45.6 -54.4 -48 -44.4 -50.8 -46 -43.3 -47.2 -44 -42.2 -43.6 -42 -41.1 -40.0 -40 -40.0 -36.4 -38 -38.9 -32.8 -36 -37.8 -29.2 -34 -36.7 -25.6 -32 -35.6 -22.0 -30 -34.4 -18.4 -28 -33.3 -14.8 -26 -32.2 -11.2 -24 -31.1 -7.6 -22 -30.0 -4.0 -20 -28.9 -0.4 -18 -27.8 +3.2 -16 -26.7 +6.8 -14 -25.6 +10.4 -12 -24.4 +14.0 -10 -23.3 +15.8 -9 -22.8 +17.6 -8 -22.2 +19.4 -7 -21.7 +21.2 -6 -21.1

+23.0 -5 -20.6 +24.8 -4 -20.0 +26.6 -3 -19.4 +28.4 -2 -18.9 +30.2 -1 -18.3 +32.0 0 -17.8 +33.3 +1 -17.2 +35.6 +2 -16.7 +37.4 +3 -16.1 +39.2 +4 -15.6 +41.0 +5 -15.0 +42.8 +6 -14.4 +44.6 +7 -13.9 +46.4 +8 -13.3 +48.2 +9 -12.8 +50.0 +10 -12.2 +51.8 +11 -11.7 +53.6 +12 -11.1 +55.4 +13 -10.6 +57.2 +14 -10.0 +59.0 +15 -9.4 +60.8 +16 -8.9 +62.6 +17 -8.3 +64.4 +18 -7.8 +66.2 +19 -7.2 +68.0 +20 -6.7 +69.8 +21 -6.1 +71.6 +22 -5.6 +73.4 +23 -5.0 +75.2 +24 -4.4

+77.0 +25 -3.9 +78.8 +26 -3.3 +80.6 +27 -2.8 +82.4 +28 -2.2 +84.2 +29 -1.7 +86.0 +30 -1.1 +87.8 +31 -0.6 +89.6 +32 0.0 +91.4 +33 +0.6 +93.2 +34 +1.1 +95.0 +35 +1.7 +96.8 +36 +2.2 +98.6 +37 +2.8 +100.4 +38 +3.3 +102.2 +39 +3.9 +104.0 +40 +4.4 +106.8 +41 +5.0 +107.6 +42 +5.6 +109.4 +43 +6.1 +111.2 +44 +6.7 +113.0 +45 +7.2 +114.8 +46 +7.8 +116.6 +47 +8.3 +118.4 +48 +8.9 +120.2 +49 +9.4 +122.0 +50 +10.1 +123.8 +51 +10.6 +125.6 +52 +11.1 +127.4 +53 +11.7 +129.2 +54 +12.2

To °F From °C or °F To °C To °F From °C or °F To °C To °F From °C or °F To °C

Temperature Conversion Table

Locate in the centre column of the three columns the temperature in °C or °F to be converted. For given Celsius temperatures, read Fahrenheit equivalent in the left-hand column. For given Fahrenheit temperatures, read the Celsius equivalent in the right-hand column.

Examples:

a. Given -30°C; convert to Fahrenheit. Locate -30 in the centre column; read -22.0°F in the left-hand column.

b. Given -30°F; convert to Celsius. Locate -30 in the centre column; read -34.4°C in the right-hand column.

For temperatures not shown, interpolate from the values listed or use the following equations:

°C = (°F - 32) x 5 °F = °C x 9 + 32 9 5



Temperature Conversion Table (continued)

+131.0 +55 +12.8 +132.8 +56 +13.3 +134.6 +57 +13.9 +136.4 +58 +14.4 +138.2 +59 +15.0 +140.0 +60 +15.6 +141.8 +61 +16.1 +143.6 +62 +16.7 +145.4 +63 +17.2 +147.2 +64 +17.8 +149.0 +65 +18.3 +150.8 +66 +18.9 +152.6 +67 +19.4 +154.4 +68 +20.0 +156.2 +69 +20.6 +158.0 +70 +21.1 +159.8 +71 +21.7 +161.6 +72 +22.2 +163.4 +73 +22.8 +165.2 +74 +23.3 +167.0 +75 +23.9 +168.8 +76 +24.4 +170.6 +77 +25.0 +172.4 +78 +25.6 +174.2 +79 +26.1 +176.0 +80 +26.7 +177.8 +81 +27.2 +179.6 +82 +27.8 +181.4 +83 +28.3 +183.2 +84 +28.9 +185.0 +85 +29.4 +186.8 +86 +30.0 +188.6 +87 +30.6 +190.4 +88 +31.1 +192.2 +89 +31.7 +194.0 +90 +32.2 +195.8 +91 +32.8 +197.6 +92 +33.3 +199.4 +93 +33.9 +201.2 +94 +34.4 +203.0 +95 +35.0 +204.8 +96 +35.6 +206.6 +97 +36.1 +208.4 +98 +36.7 +210.2 +99 +37.2 +212.0 +100 +37.8 +213.8 +101 +38.3 +215.6 +102 +38.9 +217.4 +103 +39.4 +219.2 +104 +40.0

+221.0 +105 +40.6 +222.8 +106 +41.1 +224.6 +107 +41.7 +226.4 +108 +42.2 +228.2 +109 +42.8 +230.0 +110 +43.3 +231.8 +111 +43.9 +233.6 +112 +44.4 +235.4 +113 +45.0 +237.2 +114 +45.6 +239.0 +115 +46.1 +240.8 +116 +46.7 +242.6 +117 +47.2 +244.4 +118 +47.8 +246.2 +119 +48.3 +248.0 +120 +48.9 +251.6 +122 +50.0 +255.2 +124 +51.1 +258.8 +126 +52.2 +262.4 +128 +53.3 +266.0 +130 +54.4 +269.6 +132 +55.6 +273.2 +134 +56.7 +276.8 +136 +57.8 +280.4 +138 +58.9 +284.0 +140 +60.0 +287.6 +142 +61.1 +291.2 +144 +62.2 +294.8 +146 +63.3 +298.4 +148 +64.4 +302.0 +150 +65.6 +305.6 +152 +66.7 +309.2 +154 +67.8 +312.8 +156 +68.9 +316.4 +158 +70.0 +320.0 +160 +71.1 +323.6 +162 +72.2 +327.2 +164 +73.3 +330.8 +166 +74.4 +334.4 +168 +75.6 +338.0 +170 +76.7 +341.6 +172 +77.8 +345.2 +174 +78.9 +348.8 +176 +80.0 +352.4 +178 +81.1 +356.0 +180 +82.2 +359.6 +182 +83.3 +363.2 +184 +84.4 +366.8 +186 +85.6 +370.4 +188 +86.7

+374.0 +190 +87.8 +377.6 +192 +88.9 +381.2 +194 +90.0 +384.8 +196 +91.1 +388.4 +198 +92.2 +392.0 +200 +93.3 +395.6 +202 +94.4 +399.2 +204 +95.6 +402.8 +206 +96.7 +406.4 +208 +97.8 +410.0 +210 +98.9 +413.6 +212 +100.0 +417.2 +214 +101.1 +420.8 +216 +102.2 +424.4 +218 +103.3 +428.0 +220 +104.4 +437.0 +225 +107.2 +446.0 +230 +110.0 +455.0 +235 +112.8 +464.0 +240 +115.6 +473.0 +245 +118.3 +482.0 +250 +121.1 +491.0 +255 +123.9 +500.0 +260 +126.7 +509.0 +265 +129.4 +518.0 +270 +132.2 +527.0 +275 +135.0 +536.0 +280 +137.8 +545.0 +285 +140.6 +554.0 +290 +143.3 +563.0 +295 +146.1 +572.0 +300 +148.9 +590.0 +310 +154.4 +608.0 +320 +160.0 +626.0 +330 +165.6 +644.0 +340 +171.1 +662.0 +350 +176.7 +680.0 +360 +182.2 +698.0 +370 +187.8 +716.0 +380 +193.3 +734.0 +390 +198.9 +752.0 +400 +204.4 +932.0 +500 +260.0 +1112.0 +600 +315.6 +1292.0 +700 +371.1 +1472.0 +800 +427.0 +1652.0 +900 +482.0 +1832.0 +1000 +538.0 +2012.0 +1100 +593.0 +2192.0 +1200 +649.0

To °F From °C or °F To °C To °F From °C or °F To °C To °F From °C or °F To °C

APPENDICES

106

APPEN

DIC

IESA

LPHA

BETIC

AL IN

DEX O

F PRO

DU

CTS



Viscosity Conversion Table

Kinematic Redwood Kinematic Redwood Kinematic Redwood cSt 40 C SUS Engler No. 1 Sec. cSt 40 C SUS Engler No. 1 Sec. cSt 40 C SUS Engler No. 1 Sec.

2 32.6 1.14 30.8 46 214 6.15 190 240 1112 32 990 3 36.0 1.22 33.2 50 233 6.65 207 250 1159 33 1030 4 39.1 1.31 35.8 55 256 7.25 228 260 1205 34 1070 5 42.5 1.40 38.4 60 279 7.9 248 270 1251 36 1110 6 45.7 1.48 41.0 65 302 8.6 268 280 1297 37 1150 7 49.0 1.56 43.7 70 325 9.25 286 290 1344 38 1190 8 52.0 1.65 46.5 75 349 9.85 307 300 1390 40 1230 9 55.7 1.74 49.2 80 372 10.5 329 315 1460 41 1300 10 59.0 1.83 52.1 85 395 11.2 349 330 1529 43 1350 11 62.5 1.92 55.2 90 418 11.8 370 350 1622 46 1440 12 66.2 2.02 58.4 95 442 12.5 390 370 1715 49 1520 13 70.0 2.12 61.6 100 465 13.2 410 390 1807 51 1600 15 77.5 2.32 68.2 110 511 14.5 450 410 1900 54 1690 17 85.5 2.55 75.2 120 558 15.8 490 430 1990 57 1770 19 94 2.77 82.8 130 605 17.1 530 450 2090 59 1850 21 100 3.00 90.4 140 649 18.4 570 470 2180 62 1930 23 111 3.23 98 150 695 19.7 620 490 2270 64 2010 25 120 3.46 106 160 742 21.0 660 500 2320 66 2050 28 133 3.83 117 170 788 22.5 700 550 2540 72 2260 30 142 4.09 125 180 834 24.0 740 600 2780 79 2460 33 155 4.46 137 190 881 25.0 780 650 3010 86 2670 35 164 4.71 145 200 927 26.0 820 700 3240 92 2880 38 178 5.10 157 210 973 28.0 860 750 3470 99 3080 40 187 5.35 166 220 1020 29.0 900 800 3700 105 3280 43 200 5.75 178 230 1066 30.0 940

APPENDICES

Dynamic Viscosity to Kinematic Viscosity Calculation

To convert from dynamic viscosity units, centipoise (cP), to kinematic viscosity units, centi stokes (cSt), use the following equation:

cSt = cP Density (kg/L)

Note: Viscosity and density must be measured at the same temperature.

If viscosity is known at two or more different temperatures, viscosity at other temperatures can be estimated using standard charts or equations. Charts are available from your Imperial sales representative or technical services department.



APPENDICES

3,00

0

20,0

00

50,0

00

10,0

00

5,00

0

2,00

0

1,00

0

500

400

300

200

150

100 75

50

40

30

20

15

10

9.0

8.0

7.0

6.0

5.0

4.0

3.0

-30

-20

-10

10

0 20

30

40

50

60

70

80

90

10

0 11

0 12

0 13

0 14

0 15

0 -4

0

3,00

0

20,0

00

50,0

00

10,0

00

5,00

0

2,00

0

1,00

0

500

400

300

200

150

100

75

50

40

30

20

15

10

9.0

8.0

7.0

6.0

5.0

4.0

3.0

/VISCOSITÉ CINÉMATIQUE, CENTISTOKES KINEMATIC VISCOSITY, CENTISTOKES

TEM

PERA

TURE

, DEG

REES

CEL

SIU

S /T

EMPÉ

RATU

RE, D

EGRÉ

S C

ELSI

US

VISC

OSI

TY –

TEM

PERA

TURE

CH

ART

RELA

TIO

N V

ISC

OSI

TÉ –

TEM

PÉRA

TURE

-30

-20

-10

10

0 20

30

40

50

60

70

80

90

10

0 11

0 12

0 13

0 14

0 15

0 -4

0

108

APPEN

DIC

IESA

LPHA

BETIC

AL IN

DEX O

F PRO

DU

CTS



APPENDICES

SAE Viscosity Grades for Engine Oils

Low-temperature Low-temperature Low Shear Rate Low Shear Rate SAE Cranking Pumping Viscosity Kinematic Kinematic High Shear Rate Viscosity Viscosity1 with no yield-stress2 Viscosity3 Viscosity3 Viscosity4

Grade cP at °C, Max. cP at °C, Max. cSt at 100°C, Min. cSt at 100°C, Max. cP at 150°C, Min.

0W 6,200 @ -35 60,000 @ -40 3.8 — — 5W 6,600 @ -30 60,000 @ -35 3.8 — — 10W 7,000 @ -25 60,000 @ -30 4.1 — — 15W 7,000 @ -20 60,000 @ -25 5.6 — — 20W 9,500 @ -15 60,000 @ -20 5.6 — — 25W 13,000 @ -10 60,000 @ -15 9.3 — — 20 — — 5.6 <9.3 2.6 30 — — 9.3 <12.5 2.9 40 — — 12.5 <16.3 2.95

40 — — 12.5 <16.3 3.76

50 — — 16.3 <21.9 3.7 60 — — 21.9 <26.1 3.7

Note: 1cP = 1mPa*s; 1cSt = 1mm2/s. All values are critical specifications as defined by ASTM D 3244. 1 ASTM D 5393 2 ASTM D 4684; note that the presence of any yield-stress detectable by this method constitutes a failure regardless of viscosity3 ASTM D 445 4 ASTM D 4683, CEC L-36-A-90 (ASTM D 4741) or ASTM D 5481 5 0W-40, 5W-40 and 10W-40 6 15W-40, 20W-40, 25W-40 and 40

SAE J306 Viscosity Grades for Gear Oils

SAE Maximum Temperature for Kinematic Viscosity at 100°C Viscosity Grade Brookfield Viscosity of 150,000 cP °C Min.1 Max.

70W -55 4.1 — 75W -40 4.1 — 80W -26 7.0 — 85W -12 11.0 — 80 — 7.0 <11.0 85 — 11.0 <13.5 90 — 13.5 <24.0 140 — 24.0 <41.0 250 — 41.0 —

1 Limits must also be met after testing in CEC L-45-T-93 Method C (20 hours)

Classification of Greases by National Lubricating Grease Institute (NLGI) Consistency Numbers1

NLGI 60-stroke Worked Penetration at 25°C NLGI 60-stroke Worked Penetration at 25°C Grade No. Min. Max. Grade No. Min. Max.

000 445 475 3 220 250 00 400 430 4 175 205 0 355 385 5 130 160 1 310 340 6 85 115 2 265 295

1 The grades are defined as ranges of the values of the 60-stroke worked penetration, in tenths of millimetres, as determined by ASTM D 217, ‘Cone Penetration of Lubricating Grease.’



APPENDICES

Understanding Oil Analysis

VISCOSITYProbably the most important single property of a lubricating oil. It is a major factor in the development of the load-carrying ability of an oil. It is defined as resistance to flow at 40 degrees Centigrade and typically reported in Centistokes (cSt).

For further information contact your Imperial sales representative or go to signumoilanalysis.com.

WEAR METALSThe presence of these metals can indicate a wear problem on a microscopic level before the problem can be detected by conventional means. The existence of a wear problem is determined not only by absolute values of metals, but more importantly by a relative increase or trend in one or more of these metals.

Metal Sources

Iron Cylinders, Gears, Rings, Crankshafts, Liners, Bearings, Rust

Chromium Rings, Bearing and Liner Plating

Lead Bearing Overlays

Copper Hydraulic Pumps, Bearing Cages, Bushings, Bronze Components

Metal Sources

Tin Bearing Plating, Compressors

Aluminum Pistons, Bearing and Pump, Blower and Compressor Impellers

Nickel Valves

Silver Bearing and Bushing Plating

Manganese Trace Element in Gas Turbine Components

CONTAMINANTSThese elements can be an indicator of contamination. The combination of contaminant and wear metals can indicate a harmful machine operating condition.

Contaminant Sources

Silicone Abrasive Dirt, Sealant, DefoamantBoron Anti-freeze, Oil AdditiveSodium Anti-freeze, Oil AdditivePotassium Anti-freeze, Oil AdditiveAcid Oil Degradation (TAN)Oxidation Thermal Degradation of Oil

Contaminant Sources

Water Anti-freeze, Process Water, CondensationGlycol Anti-freezeFuel Fuel SystemSoot Incomplete Combustion, Blow-byChlorine Land Fill Gas, Sea Water

ADDITIVESA chemical substance added to oil to impart or improve certain properties.

Additive Functions

Magnesium Dispersant/Detergent (TBN)Calcium Dispersant/Detergent (TBN)Barium Dispersant/Detergent

Additive Functions

Phosphorus Anti-wearZinc Anti-wearMolybdenum Anti-wear

110

APPEN

DIC

IESA

LPHA

BETIC

AL IN

DEX O

F PRO

DU

CTS



APPENDICES

ANSI-AGMA Industrial Gear Lubricants 9005-D94

R&O Inhibited Gear Oil Viscosity Range cSt Extreme Pressure Gear Oil Synthetic Gear Oil AGMA Lubricant No. at 40°C AGMA Lubricant No. AGMA Lubricant No.

0 28.8 to 35.2 None 0 S 1 41.4 to 50.6 None 1 S 2 61.2 to 74.8 2 EP 2 S 3 90 to 110 3 EP 3 S 4 135 to 165 4 EP 4 S 5 198 to 242 5 EP 5 S 6 288 to 352 6 EP 6 S 7, 7 Comp* 414 to 506 7 EP 7 S 8, 8 Comp* 612 to 748 8 EP 8 S 8A Comp* 900 to 1100 8A EP None 9 1350 to 1650 9 EP 9 S 10 2880 to 3520 10 EP 10 S 11 4140 to 5060 11 EP 11 S 12 6120 to 7480 12 EP 12 S 13 190-220 at 100°C*** 13 EP 13 S 14R** 428.5 to 857.0 at 100°C*** None None 15R** 857.0 to 1714.0 at 100°C*** None None

AGMA Lubricant No. ISO Viscosity Grade Mobil Product Mobil Synthetic Product

0 32 Mobil DTE Oil Light Mobil SHC 624 1 46 Mobil DTE Oil Medium Mobil SHC 625 2 68 Mobil DTE Oil Heavy Medium Mobil SHC 626 3 100 Mobil DTE Oil Heavy Mobil SHC 627 4 150 Mobil DTE Oil Extra Heavy Mobil SHC 629 5 220 Mobil DTE Oil BB Mobil SHC 630 6 320 Mobil DTE Oil AA Mobil SHC 632 7 460 Mobil DTE Oil HH Mobil SHC 634

AGMA Lubricant No. ISO Viscosity Grade Mobil Product Mobil Synthetic Product

2 EP 68 Mobilgear 600 XP 68 None 3 EP 100 Mobilgear 600 XP 100 None 4 EP 150 Mobilgear 600 XP 150 Mobil SHC Gear 150 5 EP 220 Mobilgear 600 XP 220 Mobil SHC Gear 220 6 EP 320 Mobilgear 600 XP 320 Mobil SHC Gear 320 7 EP 460 Mobilgear 600 XP 460 Mobil SHC Gear 460 8 EP 680 Mobilgear 600 XP 680 Mobil SHC Gear 680 8A EP 1000 None Mobil SHC Gear 1000 9 EP 1500 None Mobil SHC Gear 1500 10 EP Mobiltac LL Mobil SHC Gear 3200 11 EP None None 12 EP Mobiltac MM Mobil SHC Gear 6800 13 EP Mobiltac QQ None 14R** None None 15R** Mobiltac 325 NC, 375 NC None

AGMA Compounded ISO Viscosity Grade Mobil Product

7 Comp* 460 Mobil 600W Super Cylinder Oil 8 Comp* 680 Mobil Extra Hecla Super Cylinder Oil 8A Comp* 1000 Mobil Extra Hecla Super Cylinder Oil Mineral

* Oils marked “Comp” are compounded with 3% to 10% fatty or synthetic fatty oils.** Residual compounds-diluent type, commonly known as solvent cutbacks, are heavy oils containing a volatile, non-flammable diluent for ease of application.

The diluent evaporates leaving a thick film of lubricant on the gear teeth. Viscosities listed are for the base compound without diluent.*** Viscosities of AGMA Lubricant Number 13 and above are specified at 100°C (210°F) as measurement of viscosities of these heavy lubricants at 40°C

(100°F) would not be practical.



ALPHABETICAL LIST OF PRODUCTS

Mobil 1™ ....................................................................................................................74

Mobil 1™ Advanced Fuel Economy ............................................................................ 74

Mobil 1™ ESP Formula M 5W-40 ...............................................................................75

Mobil 1™ ESP X1 0W-30 ...........................................................................................75

Mobil 1™ Extended Performance 5W-20, 5W-30 and 10W-30 ...................................75

Mobil 1™ Racing 4T ...................................................................................................78

Mobil 1™ Synthetic ATF .............................................................................................77

Mobil 1™ Synthetic Gear Lube LS .............................................................................78

Mobil 1™ Synthetic Grease ........................................................................................91

Mobil 1™ Turbo Diesel Truck 5W-40 ...........................................................................76

Mobil Aero™ HFA .......................................................................................................86

Arapen™ RB 320 .....................................................................................................102

Mobil™ Arcan 1 ..........................................................................................................99

Mobil™ Argon EP .......................................................................................................99

Mobil Arox™ EP Series ..............................................................................................48

Mobil Arox™ NM 000 ................................................................................................ 101

Mobil™ Aviation Grease SHC 100 ..............................................................................85

Mobil Beacon™ 325 .................................................................................................103

Canthus™ 680 ............................................................................................................45

Mobil Centaur™ Moly Series ....................................................................................100

Mobil Centaur XHP™ 221 ........................................................................................ 101

Mobil Centaur XHP™ 460 Series ...............................................................................98

Mobil™ Chainoil .........................................................................................................18

Mobil™ Compressor Oils ............................................................................................24

Mobil™ Compressor Oils 264 and 460 .......................................................................24

Mobil™ Compressor Oil N 100 ...................................................................................24

Mobil™ Cylinder Oils .................................................................................................25

DDR Grease .............................................................................................................102

Mobil Delvac 1™ ESP 5W-40 and 0W-40 ..................................................................60

Mobil Delvac 1™ LE 5W-30 ........................................................................................60

Mobil Delvac™ 1300 Super 10W-30 and F2 15W-40 .................................................61

Mobil Delvac™ 1230 and 1240 ...................................................................................61

Mobil Delvac™ 1640 ...................................................................................................61

Mobil Delvac™ CNG/LNG 15W-40 .............................................................................62

Mobil Delvac™ Elite 10W-30 and 15W-40 ..................................................................60

Mobil Delvac™ Elite 222 0W-30 .................................................................................60

Mobil Delvac™ Extended Life Coolant/Antifreeze – C Series ....................................69

Mobil Delvac™ Synthetic ATF .....................................................................................63

Mobil Delvac™ Synthetic Final Drive and Axle Oil ......................................................63

Mobil Delvac™ Synthetic Gear Oils ............................................................................63

112

APPEN

DIC

IESA

LPHA

BETIC

AL IN

DEX O

F PRO

DU

CTS




Mobil Delvac™ Synthetic Transmission Fluid 50 ........................................................63

Mobil Delvac™ Xtreme Grease ................................................................................100

Mobil™ Dexron®-VI ATF ..............................................................................................77

DIOL™ 9 RD Series ...................................................................................................62

Mobil DTE 10 Excel™ Series .....................................................................................37

Mobil DTE™ 20 Series ...............................................................................................38

Mobil DTE™ 724 Oil ...................................................................................................53

Mobil DTE™ 732 M ....................................................................................................53

Mobil DTE™ 700 Series .............................................................................................53

Mobil DTE™ 800 Series .............................................................................................52

Mobil DTE™ 932 GT ..................................................................................................52

Mobil DTE™ FM Series ..............................................................................................27

Mobil DTE™ Oil 205 ..................................................................................................25

Mobil DTE™ Oil Named Series ..................................................................................20

Mobil DTE™ PM Series..............................................................................................47

Mobil Dynagear™ Series ............................................................................................95

Mobil Epic™ Series ....................................................................................................98

Exxcolub™ SCF PG ...................................................................................................22

Exxcolub™ SCF PS....................................................................................................22

Exxcolub™ SCF M2 ...................................................................................................22

Exxon™ Aviation Oil Elite 20W-50 ..............................................................................86

Exxon HyJet™ IV-A Plus ............................................................................................85

Faxam™ .....................................................................................................................45

Mobil Fenso™ Series .................................................................................................48

Formesso™ Summer Grade ......................................................................................43

Forum™ EP 46 and 68 ...............................................................................................40

Galcar All Year ............................................................................................................68

Galena™ Tramo 3735 ...............................................................................................102

Mobil Gargoyle™ Arctic Oils .......................................................................................49

Mobil Gargoyle Arctic SHC™ 200 Series .................................................................. 49

Mobil Geargard™ .......................................................................................................95

Mobil Geargard™ HVS ...............................................................................................36

Mobil GEO™ 15W-40 ................................................................................................62

Mobil Glygoyle™ 22 ....................................................................................................49

Mobil Glygoyle™ Series .............................................................................................35

Mobil Glygoyle™ Numbered Series ............................................................................19

Mobil™ Heavy Duty (HD) Chainoil .............................................................................18

Mobil™ Heavy Duty SCA Precharged Coolant/Antifreeze ..........................................69

Mobil Hydraul™ ..........................................................................................................68

Mobil Iogear™ EP 100 ................................................................................................36




Mobil Jet Oil™ II .........................................................................................................86

Mobil Jet Oil™ 254 .....................................................................................................86

Mobil Marvelube™ EP 9F ...........................................................................................94

Millcot™ K ..................................................................................................................18

Mobil™ Multi-Vehicle ATF ...........................................................................................77

Mobil Nuto™ H Series ................................................................................................40

Mobil Nyvac™ FR 200D .............................................................................................41

Mobil Pegasus™ 1 ......................................................................................................29

Mobil Pegasus™ 605 ..................................................................................................31

Mobil Pegasus™ 610 ..................................................................................................30

Mobil Pegasus™ 710 ..................................................................................................30

Mobil Pegasus™ 801 Series ......................................................................................31

Mobil Pegasus™ 805 ..................................................................................................29

Mobil Pegasus™ AGX ................................................................................................31

Mobil Pegasus™ GLX ................................................................................................30

Mobil Pegasus™ GMA ...............................................................................................29

Mobil Polyrex™ EM ....................................................................................................93

Mobil Pyrogard™ 53 ...................................................................................................41

Mobil Rarus™ 427 .....................................................................................................21

Mobil Rarus™ 800 Series ..........................................................................................21

Mobil Rarus SHC™ 1020 Series ................................................................................21

Mobil Ronex™ MP ......................................................................................................91

Mobil™ Sawguide Oils ...............................................................................................45

Mobil SHC™ 500 Series.............................................................................................37

Mobil SHC™ 600 Series.............................................................................................19

Mobil SHC™ 800 Series.............................................................................................52

Mobil SHC Aware™ Grease EP 2 ..............................................................................83

Mobil SHC Aware™ H Series .....................................................................................83

Mobil SHC Cibus™ Series .........................................................................................27

Mobil SHC™ Gear OH Series ....................................................................................35

Mobil SHC Gear™ 1500, 3200, and 6800 ..................................................................33

Mobil SHC Gear™ 46M ..............................................................................................36

Mobil SHC Gear™ Series (ISO VG 150-1000) ...........................................................33

Mobil SHC™ Grease 100 EAL Series ........................................................................93

Mobil SHC™ Grease 460 WT ...................................................................................104

Mobil SHC Pegasus™ 30 ...........................................................................................29

Mobil SHC™ PF 462 ................................................................................................103

Mobil SHC™ PM Series .............................................................................................47

Mobil SHC Polyrex™ 462 ...........................................................................................94

Mobil Super™ 1000 ....................................................................................................76

114

APPEN

DIC

IESA

LPHA

BETIC

AL IN

DEX O

F PRO

DU

CTS




Mobil Super™ 2000 ....................................................................................................76

Mobil Super™ 3000 ....................................................................................................76

Mobil ATF™ +4 ...........................................................................................................77

Mobil ATF™ 3309 .......................................................................................................77

Mobil ATF™ D/M .........................................................................................................77

Mobil™ Synthetic Oven Lube 1090 ............................................................................46

Mobil Synturion™ 6 ....................................................................................................46

Mobil™ System Cleaner .............................................................................................46

Mobil Teresso™ ..........................................................................................................54

Mobil Teresso™ GTC Series ......................................................................................54

Mobil Teresstic™ AC 32 ..............................................................................................24

Mobil Teresstic™-C .....................................................................................................20

Mobil Teresstic™ V 150 ..............................................................................................20

Mobil Unirex™ EP Series ...........................................................................................99

Mobil Unirex™ N .........................................................................................................93

Mobil Univis™ BIO-C 40 .............................................................................................39

Mobil Univis™ Extra ...................................................................................................38

Mobil Univis™ HVI 13 .................................................................................................39

Mobil Univis™ N-C Series ..........................................................................................39

Mobil Univis™ Ultra ....................................................................................................38

Mobil Vactra™ Oil Numbered Series ..........................................................................55

Mobil Vacuoline™ 500 Series .....................................................................................19

Mobil Vacuoline™ 1400 Series ...................................................................................55

Mobil Vaprotec™ Light ................................................................................................50

Mobil Velocite™ Oil Numbered Series ........................................................................51

Mobil Zerice™ S Oils ..................................................................................................49

Mobilarma™ 245 ........................................................................................................50

Mobilarma™ 700 Series .............................................................................................50

Mobilcut™ 100 ............................................................................................................42

Mobilcut™ 140 ............................................................................................................43

Mobilcut™ 350 ............................................................................................................43

Mobilgard™ 12 Series ................................................................................................82

Mobilgard™ 300 .........................................................................................................81

Mobilgard™ 410 NC (No Chlorine) .............................................................................82

Mobilgard™ 525 .........................................................................................................81

Mobilgard™ 560 VS ....................................................................................................81

Mobilgard™ 570 .........................................................................................................81

Mobilgard™ ADL Series .............................................................................................82

Mobilgard™ M30, M40 and M50 ................................................................................82

Mobilgear™ 600 XP Series ........................................................................................34




Mobilgear™ MS Series...............................................................................................44

Mobilgear SHC™ XMP Series....................................................................................35

Mobilgrease™ 28 .......................................................................................................85

Mobilgrease™ 33 .......................................................................................................85

Mobilgrease™ FM 101 ................................................................................................94

Mobilgrease XHP™ 220 Series ..................................................................................97

Mobilgrease XHP™ 460 Series ..................................................................................97

Mobilgrease XHP™ Mine .........................................................................................100

Mobilgrease™ XTC ....................................................................................................92

Mobilith SHC™ PM ................................................................................................... 101

Mobilith SHC™ Series ................................................................................................97

Mobilmet™ 420 Series ...............................................................................................42

Mobilmet™ 760 Series ...............................................................................................42

Mobiltac™ 375 NC .....................................................................................................36

Mobiltemp SHC™ 32 ..................................................................................................96

Mobiltemp™ Series ....................................................................................................96

Mobiltherm™ and Thermoil™ .....................................................................................37

Mobiltrans™ AST (All-Season Transmission) .............................................................67

Mobiltrans™ AST 30 and Mobiltrans™ AST Extra 20.................................................67

Mobiltrans™ HD 10W, 30 and 50 ...............................................................................67

Mobilube™ HD Extra MG 75W and 80W-140 ............................................................66

Mobilube™ HD LS 80W-90 ........................................................................................66

Mobilube™ HD Plus MG 75W, 80W-90 and 85W-140................................................66

Mobilube™ XFD 50 and 60 ........................................................................................66

Mobilux™ EP 111 ........................................................................................................92

Mobilux™ EP Series...................................................................................................98

Nebula™ EP Special ..................................................................................................94

Slurry Oil 62 ................................................................................................................46

SPARTAN™ EP-C.......................................................................................................34

Thredkote™ 706 .......................................................................................................103

Voltesso™...................................................................................................................51

Wire Rope Dressing ..................................................................................................104

Z-50 Pipe Dope ........................................................................................................104

116

APPEN

DIC

IESA

LPHA

BETIC

AL IN

DEX O

F PRO

DU

CTS



ISO VISCOSITY CLASSIFICATION SYSTEM

Many petroleum products are graded according to the ISO Viscosity Classification System, approved by the International Standards Organization (ISO). Each ISO viscosity grade number corresponds to the mid-point of a viscosity range expressed in centistokes (cSt) at 40°C. For example, a lubricant with an ISO grade of 32 has a viscosity within the range of 28.8–35.2, the midpoint of which is 32.

Rule-of-Thumb: The comparable ISO grade of a given product whose viscosity in SUS at 100°F is known can be determined by using the following conversion formula:

SUS @ 100°F ÷ 5 =̃cSt @ 40°C

Viscosity Classification Equivalents



All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries.

Imperial OilDownstream and Chemical 237 Fourth Avenue SW, Calgary, Alberta T2P 3M9

For more information: 1-888-968-3776

mobil.ca

mobildelvac.ca

mobilindustrial.com

Brief Product Descriptions 2015 Edition – Canada

TMTMTMTMTMTMTMTMTMTM

Brief P

rod

uct Descrip

tions 2015 E

ditio

n – Canad

aT

M

Prinect Printready ColorCarver

Page is color controlled with Prinect Printready ColorCarver 11.0.044 Copyright 2011 Heidelberger Druckmaschinen AG http://www.heidelberg.com You can view actual document colors and color spaces, with the free Color Editor (Viewer), a Plug-In from the Prinect PDF Toolbox. Please request a PDF Toolbox CD from your local Heidelberg office in order to install it on your computer. Applied Color Management Settings: Output Intent (Press Profile): ISOcoated.icc RGB Image: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no RGB Graphic: Profile: HDM sRGB Profile.icm Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent RGB/Lab Graphic: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Image: Rendering Intent: Perceptual Black Point Compensation: no Device Independent CMYK/Gray Graphic: Rendering Intent: Perceptual Black Point Compensation: no Turn R=G=B (Tolerance 0.5%) Graphic into Gray: yes Turn C=M=Y,K=0 (Tolerance 0.1%) Graphic into Gray: no CMM for overprinting CMYK graphic: no Gray Image: Apply CMYK Profile: no Gray Graphic: Apply CMYK Profile: no Treat Calibrated RGB as Device RGB: yes Treat Calibrated Gray as Device Gray: yes Remove embedded non-CMYK Profiles: yes Remove embedded CMYK Profiles: yes Applied Miscellaneous Settings: Colors to knockout: yes Gray to knockout: yes Pure black to overprint: yes Limit: 100% Turn Overprint CMYK White to Knockout: yes Turn Overprinting Device Gray to K: yes CMYK Overprint mode: set to OPM1 if not set Create "All" from 4x100% CMYK: yes Delete "All" Colors: no Convert "All" to K: no

Documents

Brief Product Descriptions (PDF)