COMPANY PROFILE

BEΩEW BRIDGE ELECTRICAL

ENGINEERING WORKS.

BEΩEW

HNO 107 Awoshie laststop, Accra near Joe cat guest house around cp

Last stop, P.O.BOX KN 3058 KANESHIE-ACCRA & TAKORADI.

bridgeelectricals@mail.com Tel; +233209839791, 0272178339

0244883529, 0268155351 www.bridgeelectricalengineeringworks.com

www.facebook.com/bridgeelectricalengineeringworks,bridgeelectricals@mail.com

Bridge Electrical Engineering started operations in July, 2005 with the purpose of setting a pace in the

telecommunication and electrical industry and other service solution industries. In May, 2007 the

company officially started its operations according to the business registration act 1962

(No 151) with the registration number BN-179D in the republic of Ghana. The main core business of the company was in the fiber optics, suppliers, electrical engineering, telecom infrastructure services and civil works.

The world is fast developing with the introduction of fiber optics into our homes, schools, institutions, etc. Bridge electrical engineering works has solutions to all fiber optics and electrical engineering field throughout Ghana and beyond.

Vision Statement BEΩEW 1. Advancing telecommunication and electrical engineering through illumination.

2. Becoming one of the best service providers upon which many can count on us.

3. Partnering with our customers to make to make sure they succeed.

4. Creating wealth for all stakeholders.

5. Demanding that everything lead to a cleaner, real then a safer environment.

6. Exceeding customer expectations.

Values Integrity

We strive to do what is right and what we say we will do.

Innovation

Apply the creative integrity necessarily to make us better, faster and creative.

Delivering superior result.

Exceed expectation consistency.

Cooperate responsibility

Serve and improve the communities in which we live.

Diversity

Ensure the diverse perspectives of all people and honor both with dignity and respect.

Global involvement

Seek a world view and act without boundaries.

Team work

We promote team work and build a harmonious working culture and working BEΩEW environment through mutual respect by strengthing communication.

Safety

We consider safety the foremost aspiration of our activities. Safety is shared responsibility and at Bridge we promote safety in all our operations.

Bridge Electrical Engineering Works has the following key personnel’s.

DOMINIC D. K DADZIE

MANAGING DIRECTOR

BEng Electrical/Electronic Eng, CFOT, HND

He is an electrical engineer with a specialization in fiber optics and electrical engineering. He is a certified fiber optic technician with a vast knowledge and experience in the fiber optic and electrical engineering field and a member of Fiber Optic Association of America and a cooperate member of the Institution of Incorporated Engineers here in Ghana. He has also worked as a project manager, maintenance and transmission engineer in various fields of endeavor. Dominic has also participated in Telecom power plants training at the Ghana Telecom Training center now Ghana Telecom University college and Mantrac for Caterpillar engine system programming training including testing, status report monitoring, diagnosis, ET (electronic technician) for caterpillar electronic engines for power generation and other CAT machines and has also undergone some safety training with Huawei SA Technologies here in Ghana and others. An entrepreneur with high business development skills.

JOSEPH KWAME AFACHAWO

DIRECTOR OF ENGINEERING

BSc Telecom Eng, HND

Mr. Joseph is a telecom engineer with a wide range of experience in the fiber optics and electrical engineering sector. He has a lot of experience with Huawei Technologies. He has a strong personality, team, organization and research abilities. He has supervised a lot of projects for all the telecommunication networks throughout the country.A committed and dedicated engineer who does not play with his job.

GEORGE EDUFUL(ECG) BEΩEWTECHNICAL ADVISOR (POWER SYSTEMS ENGINEERING)

CEng, PhD (pending), HND

RALPH AVO KWAKU

BSc Electrical/Electronic Eng, HND

TECHNICAL ADVISOR (THERMAL POWER PLANTS TICO&TAQA, TAKORADI)

EBENEZER AMPONG

HND, BEng Electrical/Electronic Eng, Post graduate Cert in Project Management.

SENIOR PROJECT MANAGER

Graduate Training Institute, University of Ghana Legon-Accra

Post graduate Certificate in Project Management

-Strategic Leadership.

-Project Scope and Time Management.

-Procurement and Quality Management.

-Project Cost Management.

-Hr. and Communication Management.

Troubleshooting and installation of electrical systems using schematics and vendor manuals.

Electrical Engineering design using AutoCAD. Training on Operation and switching of High

Voltage systems at Thomas Faraday Centre in CYPRUS. Training on DCM (Digital Master

Controllers), PLCS, SWITCHGEARS and Generator Parrelling training and management of power

Station in South-Africa, Cyanide Awareness Training at Newmont at Akyem Mine Site. Field Level

Risk Assessment Training at Newmont Mine Akyem site and fundamentals of AC Alternators at the

Cummins Training School, South Africa.

BEΩEW

OHENE KWESI ASARE

ASST PROJECT MANAGER

HND Building Technology

Mr Ohene Asare is civil/building engineer with a vast knowledge in electrical, civil works and fiber optic engineering field for many years. He has travelled to almost all the ten regions in Ghana with experience with all the networks in Ghana. Mr Ohene was appointed as the project manager due to His extensive experience across the country and beyond in project delivery approach and techniques.

JOHN EDEM AGBIGBI

OPERATIONS/SAFETY MANAGER

BEng Electrical/Electronic Eng, HND

Mr. John Edem Agbigbi is telecom engineer with past experiences in fiber optic project management, electrical, transmitters, radio system, television system, satellite, closed circuit television (CCTV) and fire alarm system installation. He has worked extensively on these projects without ease with a strong personality, team work and organizational skills.

DANIEL ILESANMI

ELECTRICAL ENGINEER

BEng Electrical/Electronic Eng

ISAAC OBENG ADJEI

IT/ELECTRONIC ENGINEER

BEng Electrical/Electronic Eng

EMMANUEL OBU-ASARE

NETWORK ADMINISTRATOR&COMPUTER ENGINEER

BSc Computer Science

GIDEON ENING BEΩEWSALES AND MARKETING MANAGER

BEng Electrical/Electronic Eng, HND

Mr. Ening is an electrical engineer by profession with a strong sales and marketing skills. Having worked in a lot of reputable establishments for long time with a lot of experience and skills.

MICHAEL ABOAGYE

SENIOR PROJECT SUPERVISOR (FIBER OPTICS)

HND Electrical/Electronic Eng.

Mr Michael Aboagye is also an electrical engineer who has worked on many fiber optics engineering field with a vast experience in the industry. He has supervised a lot of civil and trenching works throughout the country.

FRANK KOFI DADZIE

ADMINISTRATION, HR & ACCOUNTS MANAGER

BSc Accounting, ACCA II, RSA

Mr. Frank is an accountant by profession and administror with years of experience from a lot of establishments in recruiting, preparing payroll, cost accounting, management, internal auditing, finance, banking etc

EMMANUEL KOFI LATEVI

FIBER OPTIC CABLE SPLICER

HND Electrical/Electronic Eng

Mr. Latevi is an electrical engineer with more experience in the fiber optic cable splicing. He has

Supervised a lot of projects and has also worked as a fiber maintenance technician

JOSEPH KWEKU MENSAH

ELECTRICAL ENGINEER. (HIGH AND LOW VOLTAGE)

BEng Electrical/Electronic Eng BEΩEW RICHARD KWAME GYAN

ELECTRICAL ENGINEER

BEng Electrical/Electronic Eng

GABRIEL YAO BORLU

ELECTRICAL ENGINEER

BEng Electrical/Electronic Eng

SAMUEL TETTEH AFORTEY

ELECTRICAL CONTROL ENGINEER

BEng Electrical/Electronic Eng

GIDDALT KUNAKEY

ELECTRICAL ENGINEER

BEng Electrical/Electronic Eng.

KONNIBAH AKANIBAH

ELECTRICAL ENGINEER (HOSPITAL EQUIPMENT ENGINEERING)

BEng Electrical/Electronic Eng

CAN YORKE

ELECTRICAL ENGINEER

BEng Electrical/Electronic Eng

STEPHEN ARKOH

ELECTRICAL/ELECTRONIC ENGINEER

BEng Electrical/Electronic Eng

BEΩEW

SIMON ASARE

ELCTROMECHANICAL ENGINEER

BEng Electrical/Electronic Eng, MET III,

Simon is generator expert from both the electrical and mechanical section, Certificate of Competence from the Faraday Centre LTD in the Fundamentals of the Safe Operation of High Voltage Power Systems and Performing Switching and Isolation Programs, Certification on Cummins Power Generation of QSK60 Engines and Electrics, Fundamentals of Power Generation, Fundamentals of AC Generators, Controls Systems and Calibration, Basic Electrics, Automatic Transfer Switch (ATS), Interpretation of Schematics Diagram and Troubleshooting, Safety at Work, Occupational Health and Safety Management and Defensive Driving Certificate

REXFORD OHENEBAH DEKU

ELECTRICAL TECHNICIAN (DOMESTIC AND AIRCONDITION INSTALLATIONS)

NVTI 1&NVTI 2, Intermediate certificate, course A&B

VICTOR ASAZUWA(JOHVIC FIBERTECH SOLUTIONS LTD)

TECHNICAL ADVISOR (BTS AND FIBER OPTICS)

BEng, MSc, CFOT, FTTH, CFOS/I, CFOS/D, CFOS/H (FTTH), AFOT, CPCT, CFOT

JOHN ASSIFUAH (TEMA OIL REFINERY)

TECHNICAL ADVISOR. (PUMPS, GENERATORS, COMPRESSORS, ETC)

HND, MSc Electrical power systems, MSc

KWAME OFORI SIMPE(STATISTICIAN)

TECHNICAL ADVISOR (BUSINESS, ECONOMICS AND FINANCE)

PhD (pending), MSc, Diploma Telecom Engineering

MIKAEL FRANK BOMINAL

TECHNICAL ADVISOR

NVTI II, Certificate in Marine engines mechanic, MANTRAC

Caterpillar machines specialist.

Ing PETER AFOLABI BEΩEW

TECHNICAL ADVISOR

MBA Project management, MSc Civil engineering, PMI

PROJECT EXECUTION

Bridge electrical engineering works has executed a lot of projects since May, 2007.Our company

Manage, troubleshoot, repair existing fiber optic links, ftth links, and maintain telecom room.

• Turnkey installation of all fiber optic types. (under live and dead conditions)

• Specialist splicing and testing,

• Emergency repair work.

• Fiber optic design work.

• Fault location.

• Patching.

• Assisting in the commissioning of fiber optic network with an approved specialist.

• Civil works.

• Project management.

Also general electrical projects management in the rural electrification, solar paneling and maintenance, electrical network design, electrical installations, generator installations and maintenances, control panels, air condition installations and maintenances, electrical fault troubleshooting, consultancy services and maintenance on the low and high tension overhead lines are a must with bridge electrical engineering works.

The following are the underlisted projects executed by the company since May, 2007.

2006 - 2009

• Trenching, cable pulling, construction of handholes, splicing and ODF termination from Winneba to Takoradi on Vodafone Ghana project with OHI telecommunication.

• Trenching, cable pulling, construction of handholes, splicing and ODF termination from Paloma to Korle-bu on Vodafone Ghana project with OHI telecommunication.

• Streetlight project for Accra high street for Falcos Company limited.

• Streetlight project from Kasoa to Mallam junction for Falcos Company limited.

• Streetlight from Accra action chapel international lane to the first Ashiaman overhead to Tema.

• Streetlight from the Mankoadze roundabout to the Tema harbour for Alafra

• Trenching, planting of poles and pulling of cables, construction of handholes, cable splicing, ODF terminations for the whole Takoradi, Kumasi and Tarkwa Township for kenpong construction limited.

• Electrical and air condition renovation works for the audit service annex at the Greater Accra Regional Coordinating Council.

• Trenching, cable pulling, construction of handholes, splicing and ODF termination from Tema Motor way on Airtel Ghana project with Egypro.

BEΩEW

Trenching, cable pulling, construction of handholes, splicing and ODF termination from MTN

regional office through Ahodwo round about to Nyieso through Kaase Ahinsan to Gyinaase at

Kumasi.

• Generator installations for Ministry of Agric at the greater Accra region.

• Erection of tower for leadcom throughout the country

• Installation of microwave at Congo with Ericson

• MTN – Ibadum to Onusu, Trenching, cable pulling, construction of hand holes, splicing, ODF termination.

• Fiber optic cable pulling, splicing and ODF termination from Vodafone cantonment office to Kotoka International Airport and to Labadi beach hotel and LA palm royal beach hotel.

• Building of houses for EMEFA construction limited at TDC (Tema Development Corporation)

• Building of houses and wiring for Desmako at Bortiano SSNIT flat.

• Building of houses and wiring for James Construction Ltd at Tuba near Kasoa.

• Splicing, ODF termination, testing and measurement of fiber from Tema to Dunkwa and back to Essiama for VRA 161kv high tension fiber optics link.

• Renovation of Vodafone Cape Coast branch.

• Building and wiring with Regimanuel and Gray Estates at Kwabenya estate at Accra.

• Building and wiring with of estate for ACP at Pokuase.

• Renovation and building works for Cantonments and Odorkor Police barracks for Sikkens.

• Laying of cable for VRA (4x240mm2) 3kms 7 ways and interconnection of fiber from Vodafone Ghana to Access Bank, Eco Bank, ADB, Intertech-Tarkwa, liebhr, Banlaw

BEΩEW• Networking of internet cable for GCNET at Accra Customs, Head office.

• Ghana Civil Aviation Authority - running of internet cables in the building.

• Kings University College – running of internet cable.

• Electrical wiring at private properties with a minimum of eight rooms.

• Rural Electrification at Dormaa to Nkrasa Nkwanta, Diabaa to Diabene, Atebubu township.

• Construction of pipeline for Denyse at Tafo to Koforidua, Praso to Cape Coast, Assin Fosu to Assin Edubiase, Mampong township, Akwatia township, Suhum township.

• Feeder roads – construction of gutters from Eshiem to Kyeikrom in the Western Region.

• Rural Electrification – Kyeikrom to Bonsie in the Western region

• Industrial wiring and installation of submersible pumps at PSG workshop yard at Daboase.

• Rural Electrification – Bonsie to Kwaku Buah in the Western region.

• Construction of medical dental council at Adjabeng court at Accra near cocoa board Kingsway area.

• Renovation works for cocoa board at Accra near Adjabeng court.

2010 – 2015

• Trenching, cable pulling, construction of handholes, splicing, ODF termination from Kumasi to Dormaa Ahenkro to Cote D’voire for MTN Ghana

• Trenching, cable pulling, construction of handholes, splicing, ODF termination for Takoradi township for MTN Ghana.

• Trenching, cable pulling, construction of handholes, splicing, ODF termination for Tarkwa township for MTN Ghana

• Trenching, cable pulling, construction of handholes, splicing, ODF termination from Kumasi to Koforidua to Ho for Glo Ghana

BEΩEW• Trenching, cable pulling, construction of handholes, splicing, ODF termination from Kumasi to

Koforidua to Ho for MTN Ghana

• Trenching, cable pulling, construction of handholes, splicing, ODF termination from Aflao to Ho for MTN Ghana

• Trenching, cable pulling, construction of handholes, splicing, ODF termination from Sunyani to Wenchi to Bamboi to WA for Vodafone Ghana.

• Trenching, cable pulling, construction of handholes, splicing, ODF termination from Wa to Tumu for Vodafone Ghana.

• Trenching, cable pulling, construction of handholes, splicing, ODF termination from Tamale to Nasea for MTN Ghana

• Trenching, cable pulling, construction of handholes, splicing, ODF termination from Bimbila to Nkwanta North by Kenpong Ghana

• Erection, pulling of high tension overhead cables (161kv) and distribution of lines at VRA substation at Kintampo.

• Tower erection and overhead cable pulling from Bui Dam to Kintampo for VRA.

• Reconstruction of concrete structures, fixing of current transformers, tower erection, cable pulling at the ECG Takoradi sub- station A-B, station B-C for MBH Ghana.

• Pulling of overhead fiber cable 38km by Rankine for Vodafone Ghana.

• Pulling of underground 33kv cable from Teshie to Tema for ECG.

• Servicing, installation and alignment of microwaves antennae’s for all Tigo cell site across the country

• Servicing, installation and alignment of microwaves antennae’s for all MNT cell site across

Cote D’voire from Yamoussoukro to Buntuku by ROM Consult

• Trenching, cable pulling, splicing ODF termination from Yamoussoukro to Buntuku for ROM Consult.

BEΩEW • Running of commentary/telephone cable for Accra, Kumasi, Tamale and Esipon Stadium for

the CAN 2008

• Running of overhead conductors/cable from Nima Police station to Kotobabi.

• Fiber maintenance for Tigo and MTN through Ghana.

• Generator installation for Vodafone yard at Tarkwa and Asankragwa.

• Construction of drainage gutters for Teshie Tsui bleo to sick lady lane.

• Running of overhead high tension cables (11kv) around Goldfields yard.

• Running of overhead high tension cable (33kv) from Esiama GRIDCo substation to Adamus mines and resources yard.

• Laying of sea cable (marine FOC) for Vodafone at high street to the deep sea.

• Fixing of automatic change over swiches for Ministry of Agric.

• Running of 11kv, 33kv and fiber cables for Tema Oil Refinery

• Rural electrification at Anloga to Keta, Dodge township, Bortiano to Kokrobitey.

• Installation of transformers (1000KVA), distribution panels, isolator’s, autoreclosers, ring main

unit for Aboadze and Bibiani.

FINANCIAL STAND

Bridge Electrical Engineering Works Projects are mostly pre- financed by most of the Banks and other financial institutions for fast and prompt quality project delivery at your door step.

The company can execute works up to US $10 million dollars and sometimes even above. We mostly finance most of our client projects for some time before we are settled financially. This is based on discussions and agreements with our clients.

BEΩEW CONCLUSSION

Bridge Electrical Engineering Works is one of the best project management and service providing organization and has a whole lot of experiences, hardworking and dedicated technical support expertise/staffs to be at your service when the need arises. For any of your project be it fiber optics, civil works, supplying and electrical, etc do not hesitate to contact us. The company has partners overseas in the supply of diesel and gas generators which are built on Cummins, Deutz, Perkins, Yuachi, Wechai, Shangchai, Ricardo engines and etc with the world famous brand alternator such as Stamford, Marathon, Leroy Somer etc with power ranges from 6kw to 2,200kw which we offer after sales services to our customers. For clients that have already bought generators we can also install them for you and continue with periodic servicing and maintenances for you. We are ever ready to work with your organization so as to establish a cordial relation with you. Not only do we supply generators but transformers, switch gears, overhead conductor cables, fiber optic cables, heavy duty equipment’s such as dozers, back holes and etc.

Bridge electrical engineering works is a safety and ISO 9001 compliance company that adheres strictly to safety rules and regulations at site. i.e. (HSE & QHSE Management) and has insurance policy for all of its staffs.For consultancy services also we are available.

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

BEΩEW

DOMINIC D. K DADZIE

MD, BEΩEW…………………………..