Brick Shapes

Brick Shapes

ne main reason for brick’s popularity with architects, designers andbuilders is its ability to adapt to design criteria. It can be shaped and used in a wide variety of traditional and contemporary detailing –

from arches to sills, copings, columns and treads. Glen-Gery manufactures a complete selection of brick shapes to match its comprehensive line ofextruded, molded, and handmade brick.

This catalog illustrates the standardized shapes that are available fromGlen-Gery’s manufacturing facilities. Their availability may differ from plant toplant depending on the size and type of brick produced. Unit identification, size availability and dimensioning are noted on each shape type, making theordering process simple and straightforward. For these standard shapes, nodrawings are necessary; simply call your Glen-Gery representative with theordering information.

While these shapes can accomplish a wide variety of architecturaldetailing, Glen-Gery realizes that the creative process may require shapes that do not fall within standardized design. To meet this need, Glen-Gery Brick is equipped to produce customized shapes that conform to the designer’s specifications. Custom shapes can be produced in either extruded, molded or handmade brick types, although some textures may not be available. Because of the technical expertise necessary to produce these custom shapes, it is important to consult with a Glen-Gery BrickworkDesign Center or technical advisor for the most practical and cost-effectivemethod of achieving the desired shape.

Glen-Gery’s network of Design Advisors are available to coordinate the design and production of custom brick shapes. Please contact them early in the design stage so that all practical options can be explored.

INTRODUCTION 1TECHNICAL INFORMATION 2-3

Brickwork Design Services 3WATER TABLES 4-9

On-the-flat 5-7Rowlock 8-9

SILLS, COPINGS, AND TREADS 10-13Sills 11-12Copings 12-13Treads 13

CORNERS, LIPPED, AND RADIALS 14-19Corners 14-15Lipped 15Radials 16-19

ARCHES 20-218-SQUARE SHAPES 22COATED BRICK SHAPES 23CUSTOM SHAPES 24

1

O

2

Technical and Specification Information

len-Gery standardized shapes can be easily ordered by followingthe established format. An accurate specification should includethe number of pieces, proper shape identification, brick size,

brick type and color range, as described in this section. Your Glen-Geryrepresentative will be glad to answer any questions or provide moredetailed information on standardized shapes, custom shapes, or otheraspects of brickwork design and detailing.

Position of Brick in the WallInteresting brickwork design effects can be achieved by placingbrick in other than the normalstretcher position, as illustratedbelow. Regardless of how the brick is installed in the wall, sizedimensions (thickness, height and length of the unit) are alwaysassigned from the stretched position.

G

Stretcher

Header

Rowlock

Soldier

Sailor

Rowlock Stretcher

h

h

l

t

t

t l

tl

l t

l

h

h

lh

h

t

Glen-Gery Brick Sizes for Standard Shapes

STANDARD

STANDARD MOD

ENGINEER STD

ENGINEER MOD

ECONOMO

UTILITY

*HMOS

*Handmade Oversize

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

3-5/8"

3-5/8"

2-3/4"

8"

7-5/8"

8"

7-5/8"

7-5/8"

11-5/8"

8-1/2"

t h l

Glen-Gery Brick Types

ExtrudedETD

MoldedM

HandmadeHM

GlazedGL

Brick Colors & TexturesGlen-Gery provides a wide selection of brick colors including ranges of white, buff, grey, red, and brown in both through-the-body and sand finished brick.Glazed and claycoat brick are available in standard colors as well as an unlimited range of custom colors. Custom colors oftenrequire a minimum order. More thanthirty different textures are available ranging from architectural smoothand glazed to a rough bark finish.Availability of color and texturevaries from plant to plant dependingon the type of brick produced.

CoringCoring of standardized brick shapes is a plant option. Any coringrequirements to these shapesplaces them into a custom shapecategory – requiring drawings.

3

Glen-Gery Design Advisorsshare their expertise.

Since its founding a century ago,

Glen-Gery has been committed

to providing high quality products

and professional services to the

design/builder community.

Our team of Design Advisors fulfill

this promise by offering practical

advice, valuable insights and useful

recommendations. As professional

engineers, they have a complete

understanding of the technical

applications, requirements and

considerations for proper brickwork

design. Some of their many areas

of expertise include preventing

water penetration, custom shape

design, differential movement and

exterior paving with brick.

As a service to clients, Glen-Gery

Design Advisors are also available

to consult on plan reviews and

perform on-site field investigations.

These complimentary services are

provided to the professional design

and construction community to

underscore Glen-Gery’s dedication

to the promotion of excellence in

brickwork design.

W – Water TableH – HeaderS – StretcherEX – ExternalIN – InternalR – RowlockST – Starter

LT – LeftRT – RightSL – SillCO – CopingT – TreadRA – RadialLP – LippedO – Octagon

Shape Identification

HB – Hingebrick8SQ – Eight SquareK – KerfedFA – Flat Arch(or) – Requires Choicex/y – Unit serves both functions1-1/1 – Specific unit size

Throughout this catalog shaded areas denote finished faces.

For ExampleW1- R-ST-(LT or RT) Requires that left or right be specified

for the shape.Indicates a starter shape.Identifies a rowlock position.Identifies a specific watertable shape.Designates a watertable shape.

Shape Specification

The following information is required when ordering shapes from this catalog.

Please check with your Glen-Gery representative to ensure that the standardized shape & size requested is available in the specified type and color.

500 W1-R-ST-RT ECONOMO ETD FALL GREY

# pieces Shape ID Brick Size Brick Type Brick Color

4

On-the-flat Water TableSystemsThere are two types of on-the-flat water table systems based on the brick position in the wall.1) Water table in the header

position (H).2) Water table in the stretcher

position (S).Each system is available with companion exterior and interior corners.

Rowlock Water Table Systems1) Water table in the rowlock

brick position (R).

In this application, rowlockwater tables have been rotated to the header position (H).

Water tables can also beturned upside down to achieve a cornice detail.

H

R

H

H

S

5

Water Tables on-the-flat

Water Tablesowlock and on-the-flat

water tables, once used to

reduce water penetration, are now

used by architects and designers to

achieve decorative design details.

These details can range from the

use of a single style

for simplicity to a

combination of

styles to achieve

highly ornate brick-

work. In addition to

their traditional use,

these shapes can be used to add

dimension to flat walls, rotated to

form door and window jambs, or

inverted to form cornice brickwork.

Continuity of design can also be

transferred into the landscape

by using the water tables as caps

for walls or edging accents for

walkways.

*NOTE: The header and stretcher shapes of the W1-EX and W1-IN can be used with either the W1-H or W1-S.

*W1-H-EX*W1-S-EX

*W1-H-IN*W1-S-IN

tl

h

tl

h

ON-THE-FLAT

STANDARD

STANDARD MOD

ENGINEER STD

ENGINEER MOD

ECONOMO

UTILITY

HMOS

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

3-5/8"

3-5/8"

2-3/4"

8"

7-5/8"

8"

7-5/8"

7-5/8"

11-5/8"

8-1/2"

t h l A

1/2"

1/2"

1"

1"

1-7/8"

1-7/8"

1"

RA

1-3/4”

1-3/4”r

A

W1-H

W1-S

1-3/4”r

A

1-3/4”

1-3/4”r

A

W1-H

W1-S

1-3/4”r

6


W2-H-INW2-S-IN

tl

h

W3-H-INW3-S-IN

tl

h

W2-H-EX

W2-S

W2-H

W2-S-EX

tl

h

h

t

t

h

l

A

W3-H-EXW3-S-EX

tl

h

A

1-1/2"r1-1/2"r

W3-S

t

h

l

A

l

W3-H

h

t

A

1-1/2"

135° l

135°

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

3-5/8"

3-5/8"

2-3/4"

8"

7-5/8"

8"

7-5/8"

7-5/8"

11-5/8"

8-1/2"

t h l A

3/4"

3/4"

1-1/4"

1-1/4"

2-1/8"

2-1/8"

1-1/4"

ON-THE-FLAT

STANDARD

STANDARD MOD

ENGINEER STD

ENGINEER MOD

ECONOMO

UTILITY

HMOS

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

3-5/8"

3-5/8"

2-3/4"

8"

7-5/8"

8"

7-5/8"

7-5/8"

11-5/8"

8-1/2"

t h l A

3/4"

3/4"

1-1/4"

1-1/4"

2-1/8"

2-1/8"

1-1/4"

ON-THE-FLAT

STANDARD

STANDARD MOD

ENGINEER STD

ENGINEER MOD

ECONOMO

UTILITY

HMOS

7


W4-H

h

t

A

1-3/4"

1-1/16"r

1-5/16"rl

W5-H

W5-S

HMOS ONLY

3/8"

3/8"

1"

8-1/2"

4"

2-3/4"

4"

2-3/4"

8-1/2"

W4-S

A

t

h

l

W4-H-INW4-S-IN

tl

h

W4-H-EXW4-S-EX

tl

h

W6-H-INW6-S-IN

4"8-1/2"

2-3/4"

4"8-1/2"

2-3/4"

W6-H-EXW6-S-EX

4"8-1/2"

2-3/4"

W5-H-INW5-S-IN

4"8-1/2"

2-3/4"

W5-H-EXW5-S-EX

1-3/8"r

W6-H HMOS ONLY

1/2"

5/16"

8-1/2"

2-3/4"

4"

1-3/8"r

1-15/16"r

2-1/4"

W5-S-ST-LT(SHOWN)

W5-S-ST-RT

4"

2-3/4"

8-1/2"

6"

2-1/4"

W6-S-ST-LT(SHOWN)

W6-S-ST-RT

4"

2-3/4"

8-1/2"

6"

1-15/16"r

W6-S

4"

2-3/4"

8-1/2"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

3-5/8"

3-5/8"

2-3/4"

8"

7-5/8"

8"

7-5/8"

7-5/8"

11-5/8"

8-1/2"

t h l A

3/8"

3/8"

1-1/4"

1-1/4"

3/8"

ON-THE-FLAT

STANDARD

STANDARD MOD

ENGINEER STD

ENGINEER MOD

ECONOMO

UTILITY

HMOS

8

Water Tables rowlock

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

3-5/8"

3-5/8"

2-3/4"

8"

7-5/8"

8"

7-5/8"

7-5/8"

11-5/8"

8-1/2"

t h l A B C D E F

1-7/8"

1-7/8"

1-7/8"

1-7/8"

1-7/8"

1-7/8"

2-1/4"

ROWLOCK

STANDARD

STANDARD MOD

ENGINEER STD

ENGINEER MOD

ECONOMO

UTILITY

HMOS

7/8"

7/8"

7/8"

7/8"

7/8"

7/8"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-1/4"

1-5/8" 3/8"

3/8"

3/8"

3/8"

3/8"

3/8"

3/8"

3/4"

3/4"

3/4"

3/4"

3/4"

3/4"

3/4"

1-1/8"

Table at left refers to isometric drawingsW7-R through W12-R.

W7-R-IN-lW7-R-IN-t

t

l t

W7-R1-3/4"r

Al

h

t1-3/4"

W7-R-EX-lW7-R-EX-t

t

l t

W8-R-IN-lW8-R-IN-t

t

l t

W8-R2"r

Bl

h

t2"

3/4"

t

lt

W8-R-EX-lW8-R-EX-t

W9-R-IN-lW9-R-IN-t

t

l t

W9-R135°

Cl

h

t2-3/8"

2-3/8" t

lt

W9-R-EX-lW9-R-EX-t

W10-R-IN-lW10-R-IN-t

t

l t

W10-R2-1/8"r

D

2-1/8"r

l

h

t2"

t

l t

W10-R-EX-lW10-R-EX-t

9

Water Tables rowlock

W11-R2-3/4"r

E

1/2"

l

h

t 2-3/4"


t

l t


t

l t

W12-R2-1/4"r

F

3/4"

l

h

t2-3/4"

1/2"


t

l t


t

l t

W13-R

2-3/4"

8-1/2"

3/8"

1-5/8"

6-3/4"

1-1/2"r

2"r

4"

HMOS ONLY

W14-R2-3/4"

8-1/2"

3/4"

1/2"

5-3/4"1-1/4"r

1-1/2"r

4"

W14-R-EX-81/2"W14-R-EX-4"

4"8-1/2"

t

W13-R-EX-81/2"W13-R-EX-4"

4"

4"

8-1/2"

W13-R-IN-81/2"W13-R-IN-4"

4"

4"

8-1/2"

W14-R-IN-81/2"W14-R-IN-4"

4"

4"

8-1/2"

W13-R-ST-LT(SHOWN)

W13-R-ST-RT

4"

4"

8-1/2"

6"

2-1/2"

W14-R-ST-LT(SHOWN)

W14-R-ST-RT

4"

4"

6"

1-1/4"

8-1/2"

10

Sill SystemsSills are used to protect thebrick masonry below a windowor door opening from waterpenetration. Their design forces water away from thesecritical areas. These shapes are available with companionleft and right starters. Whenordering these starters, please specify left or right.

Coping SystemsCopings form a cap on top of a wall that protects the brickmasonry below from water penetration. Their design forceswater to run off while exposinga minimum number of mortarjoints. These shapes and theircompanion exterior/ interior corners and starters are available in sizes that cap walls constructed of 1-3 wythesof brick.

Tread SystemsTreads are designed withcurves that add safety andbeauty to a stairway. They areavailable in 3-5/8" and 7-5/8"units (4" and 8-1/2" for HMOS)along with their companion corner units.

11

Sills, Copings,and Treads

he basic function of copings

and sills is to reduce the

potential for water penetration. This

is easily and attractively accom-

plished with a variety of Glen-Gery

brick shapes. Their profiles, whether

angular or curvilinear, add distinctive

detailing to wall caps, windows, and

door openings. Tread shapes are

manufactured to properly finish brick

steps and other paving applications.

T

2-1/4"SL1-35/8"SL1-75/8"

5-3/4"

2-1/4"

7-5/8"3-5/8"

3-1/4"

SL1-ST-(LT OR RT)-35/8"SL1-ST-(LT OR RT)-75/8"

5-3/4" 7-5/8"3-5/8"

SL2-ST-(LT OR RT)SL27-5/8"

3-1/4"

6-1/8"

7-5/8"

3-1/4"

6-1/8"

1-1/16"r

1 OR 2 COURSE STARTERS AVAILABLE AS CUSTOM SHAPES (DRAWINGS REQUIRED)

SL3-ST-(LT OR RT)SL3

4-1/8"

6-3/8"

4-3/4"7-5/8"

1/2"

4-1/8"

6-3/8"

4-3/4"7-5/8"

1/2"1-5/8"r

1 OR 2 COURSE STARTERS AVAILABLE AS CUSTOM SHAPES (DRAWINGS REQUIRED)

2-1/4”

5-3/4”

2-1/4”

SL1-EX

12

Sills and Copings

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

3-5/8"

3-5/8"

2-3/4"

t hSL4

STANDARD

STANDARD MOD

ENGINEER STD

ENGINEER MOD

ECONOMO

UTILITY

HMOS

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

8"

7-5/8"

8"

7-5/8"

7-5/8"

11-5/8"

8-1/2"

1-13/16"

1-13/16"

1-13/16"

1-13/16"

1-13/16"

1-13/16"

2"

t l r A

3/8"

3/8"

3/8"

3/8"

3/8"

3/8"

3/4"

CO1

STANDARD

STANDARD MOD

ENGINEER STD

ENGINEER MOD

ECONOMO

UTILITY

HMOS

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

3-5/8"

3-5/8"

2-3/4"

8"

7-5/8"

8"

7-5/8"

7-5/8"

11-5/8"

8-1/2"

t h lCO2

STANDARD

STANDARD MOD

ENGINEER STD

ENGINEER MOD

ECONOMO

UTILITY

HMOS

8"

7-5/8"

8-1/2"

8"

7-5/8"

8-1/2"

t lCO3

STANDARD

MODULAR

HMOS

SL4

2"

2"

*MAX. 11-5/8"

*Length is variable and must be specified.

h

t SL4-ST-(LT OR RT)

135°

135°

CO2

l

l

t

h

t

CO2-ST

CO2-EX/IN

1-3/4"r1-3/4"r 3-5/8"

l

t

CO3 F

t l

3-1/8"3-5/8"

CO3-ST-(LT OR RT)F

t l

3-1/8"3-5/8"

CO3 F

t l

3-1/8"3-5/8"

CO3-ST-(LT OR RT)F

t l

3-1/8"3-5/8"CO3 F

t l

3-1/8"3-5/8"

CO3-ST-(LT OR RT)F

t l

3-1/8"3-5/8"

3-5/8”

3-1/8”

CO3-EX CO3-INF

3-1/8”

F

CO1

tl

t

A

r

CO1-ST

tlCO1-EX/IN

13

Copings and Treads

7-5/8"

7-5/8"

3-5/8"

7-5/8"

8-3/4"

2-1/4"

T1-35/8" T1-75/8"

1-1/8"r

7-5/8"7-5/8"

T1-CR-(LT OR RT)-35/8" T1-CR-75/8"

3-5/8"

3/8"

7-5/8"

3-5/8"

7-1/16"

8"

2-1/4"

T2-35/8" T2-75/8"15/16"r

7-1/16"

3-5/8" 7-1/16"

T2-CR-(LT OR RT)-35/8"T2-CR-75/8"

7-1/16"

HMOS ONLY8-1/2"

4"

7"

8-1/2"

2-1/4"

T3-81/2" T3-CR-(LT OR RT)-4"

T3-4"

7/8"r

5/8"r

3/8"

7"4" 7"7"

T3-CR-81/2"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

tCO4 or CO5

STANDARD

STANDARD MOD

ENGINEER STD

ENGINEER MOD

ECONOMO

UTILITY

HMOS

CO4-EX/IN2-PIECE OPTION(DRAWINGS REQUIRED)

CO4 CO4-EX/IN

10"

t

2"

1-1/2"

5"r

2"r

3/4"

1/2"

4-1/2"r

1-1/4"r5/16"

CO4-ST

10"

10"

3-1/2"

CO5

CO5-ST

12"

t

12"

4"

5/16"

CO5-EX/IN

12"

4"

6"

4"

6"

3-1/2"

4"r

2"r

CO4 CO4-EX/IN

10"

t

2"

1-1/2"

5"r

2"r

3/4"

1/2"

4-1/2"r

1-1/4"r5/16"

CO4-ST

10"

10"

3-1/2"

CO5

CO5-ST

12"

t

12"

4"

5/16"

CO5-EX/IN

12"

4"

6"

4"

6"

3-1/2"

4"r

2"r

CO4 CO4-EX/IN

10"

t

2"

1-1/2"

5"r

2"r

3/4"

1/2"

4-1/2"r

1-1/4"r5/16"

CO4-ST

10"

10"

3-1/2"

CO5

CO5-ST

12"

t

12"

4"

5/16"

CO5-EX/IN

12"

4"

6"

4"

6"

3-1/2"

4"r

2"r

CO4 CO4-EX/IN

10"

t

2"

1-1/2"

5"r

2"r

3/4"

1/2"

4-1/2"r

1-1/4"r5/16"

CO4-ST

10"

10"

3-1/2"

CO5

CO5-ST

12"

t

12"

4"

5/16"

CO5-EX/IN

12"

4"

6"

4"

6"

3-1/2"

4"r

2"r

CO4 CO4-EX/IN

10"

t

2"

1-1/2"

5"r

2"r

3/4"

1/2"

4-1/2"r

1-1/4"r5/16"

CO4-ST

10"

10"

3-1/2"

CO5

CO5-ST

12"

t

12"

4"

5/16"

CO5-EX/IN

12"

4"

6"

4"

6"

3-1/2"

4"r

2"r

14

Corner BrickThe octagon and hingebrick aredesigned to provide alternativecorner treatments that do notrequire field cutting. The octagonbrick shapes form 135° interior orexterior angles while maintainingcoursing and visual continuity.

The unique design of the hingebrick offers even greaterdesign flexibility. It allows anunlimited range of angles at corners and can be adapted foruse in other brickwork details.

Lipped BrickWhen used with a structurallyfixed shelf angle, lipped brick provide inconspicuous, verticalexpansion joints for brick masonrystructures. They can also be usedwith loose shelf angles to form lintels above window and dooropenings.

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

3-5/8"

3-5/8"

2-3/4"

3-13/16"

3-5/8"

3-13/16"

3-5/8"

3-5/8"

3-5/8"

4"

t h lHINGEBRICK

STANDARD

STANDARD MOD

ENGINEER STD

ENGINEER MOD

ECONOMO

*UTILITY

HMOS

* 1/3 Bond

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

3-5/8"

3-5/8"

3-5/8"

2-3/4"

6-3/16"

6"

6-3/16"

6"

6"

6"

8"

6-7/8"

t h l A

2"

2"

2"

2"

2"

2"

2"

2-3/8"

O1-EX & O1-IN

STANDARD

STANDARD MOD

ENGINEER STD

ENGINEER MOD

ECONOMO

*UTILITY

**UTILITY

HMOS

*1/3 Bond **1/2 Bond

A

O1-EX

135°

l

t

h

A

O1-IN

135°

l

t

h

7/16"t

h

l

HBF

1-11/16"r

Corners, Lipped,and Radials

15

len-Gery’s corner, lipped,

and radial brick shapes

are manufactured to provide the

masonry units necessary to achieve

sound brickwork detailing while

offering greater design flexibility.

G

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

3-5/8"

3-5/8"

2-3/4"

8"

7-5/8"

8"

7-5/8"

7-5/8"

11-5/8"

8-1/2"

t h l A B C

2-7/8"

2-7/8"

2-7/8"

2-7/8"

2-7/8"

2-7/8"

3-1/4"

LP1 & LP2

STANDARD

STANDARD MOD

ENGINEER STD

ENGINEER MOD

ECONOMO

UTILITY

HMOS

1-5/8"

1-5/8"

2-1/8"

2-1/8"

3"

3"

2-1/8"

7-3/8"

7"

7-3/8"

7"

7"

11"

7-7/8"

B

LP1

l

t

h

A

Unfinished lip unless specified



LP2t

l


(BOTTOM VIEW)

3/4"

5/8"

3/4"

5/8"

h

C

A

F

F

LP2-CR-(LT OR RT)

3/4"5/8"

(BOTTOM VIEW)

F

LP1-CR-(LT OR RT)

3/4"

F

5/8"

B

LP1

l

t

h

A




LP2t

l


(BOTTOM VIEW)

3/4"

5/8"

3/4"

5/8"

h

C

A

F

F

LP2-CR-(LT OR RT)

3/4"5/8"

(BOTTOM VIEW)

F

LP1-CR-(LT OR RT)

3/4"

F

5/8"

(BOTTOM VIEW)

LP1-CR-(LT or RT)

3/4”

LP2-CR-(LT or RT)

(BOTTOM VIEW)

3/4”

B

LP1

l

t

h

A




LP2t

l


(BOTTOM VIEW)

3/4"

5/8"

3/4"

5/8"

h

C

A

F

F

LP2-CR-(LT OR RT)

3/4"5/8"

(BOTTOM VIEW)

F

LP1-CR-(LT OR RT)

3/4"

F

5/8"

B

LP1

l

t

h

A




LP2t

l


(BOTTOM VIEW)

3/4"

5/8"

3/4"

5/8"

h

C

A

F

F

LP2-CR-(LT OR RT)

3/4"5/8"

(BOTTOM VIEW)

F

LP1-CR-(LT OR RT)

3/4"

F

5/8"

16

Radials

Radial BrickInternal and external radial brick shapes, along with theircompanion starters, can be used to create details rangingfrom curtain-like walls to towering columns. These shapesare designed to form smooth,sweeping curves in brickworkwithout producing shadows orrequiring field cuts.

FPO-10436

17

Radials

PLAN VIEW RA-EX-ST & RA-EX-S

PLAN VIEW RA-IN-ST & RA-IN-S

Radials

Dimensions for Glen-Gery’s

standardized radial brick

are computed so that the arc

length appears equal to the

length of the accompanying

stretcher units. They are

also designed so that a

whole number of brick fall

within a 90° segment,

eliminating the need to cut

brick to achieve tangency

at 90°, 180° or 270°.

Other radii are available as

custom shapes and require

architectural drawings.

Radials

18

RA-IN-S

l (MAX)

ARC l

VARIES w/RADIUS

CHORD l

r

t

h

RA-IN-ST

rARC l

A

VARIES w/RADIUS

tl (MAX)

h

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

3-5/8"

3-5/8"

2-3/4"

11-5/8"

11-5/8"

11-5/8"

11-5/8"

11-5/8"

11-5/8"

11-5/8"

t h l (MAX)RA-IN-S

*STANDARD

*STANDARD MOD

*ENGINEER STD

*ENGINEER MOD

*ECONOMO

**UTILITY

*HMOS

8"

7-3/16"

7-11/16"

8"

7-1/2"

7-15/16"

7-1/8"

7-11/16"

8"

7-1/2"

3

5

7

9

12

ARC lRADII

16"

24"

36"

48"

60"

CHORDl #/90o

*Standardized radii available in all brick sizes except utility.

9-1/16"

9-1/16"

10-3/8"

10-1/16

9"

9"

10-3/8"

10-1/16"

4

6

7

9

ARC lRADII

24"

36"

48"

60"

CHORDl #/90o

**Standardized radii available in utility size unit.

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

2-3/4"

4"

3-13/16"

4"

3-13/16"

3-13/16"

5-13/16"

3-13/16"

7-13/16"

4-1/4"

t h A l (MAX)

11-5/8"

11-5/8"

11-5/8"

11-5/8"

11-5/8"

11-5/8"

11-5/8"

11-5/8"

11-5/8"

RA-IN-ST

*STANDARD

*STANDARD MOD

*ENGINEER STD

*ENGINEER MOD

*ECONOMO

1/2 BOND

1/3 BOND

2/3 BOND

*HMOS

**U

TIL

ITY

4"

3-9/16"

3-13/16"

4"

3-3/4"

ARC lRADII

16"

24"

36"

48"

60"


4-1/2"

4-1/2"

5-3/16"

5"

6"

6"

6-7/8"

7-1/4"

ARC lRADII

24"

36"

48"

60"


1/2B 1/3B 2/3B

3"

3"

3-7/16"

3-3/8"

Radials

19

RA-EX-S

ARC l

VARIES w/RADIUS

h

t

r

l (MAX)

RA-EX-ST

ARC l

A

h

trl (MAX)

VARIES w/RADIUS

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

3-5/8"

3-5/8"

2-3/4"

8"

7-5/8"

8"

7-5/8"

7-5/8"

11-5/8"

8-1/2"

t h l (MAX) RA-EX-S

*STANDARD

*STANDARD MOD

*ENGINEER STD

*ENGINEER MOD

*ECONOMO

**UTILITY

*HMOS

8"

7-3/16"

7-11/16"

8"

7-1/2"

3

5

7

9

12

ARC lRADII

16"

24"

36"

48"

60"

#/90o


9-1/16"

10-5/16"

10-3/8"

11-3/8"

4

5

7

8

ARC lRADII

24"

36"

48"

60"

#/90o


4-1/2"

5-7/16"

5-3/16"

5-11/16

6"

7-1/4"

6-7/8"

7-1/2"

ARC lRADII

24"

36"

48"

60"


1/2B 1/3B 2/3B

3"

3-5/8"

3-7/16"

3-3/4"

3-1/16"

3"

3-7/16"

3-11/16"

3-1/2"

ARC lRADII

16"

24"

36"

48"

60"


3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

2-3/4"

4"

3-13/16"

4"

3-13/16"

3-13/16"

5-13/16"

3-13/16"

7-13/16"

4-1/4"

t h A l (MAX)

8"

7-5/8"

8"

7-5/8"

7-5/8"

11-5/8"

11-5/8"

11-5/8"

8-1/2"

RA-EX-ST

*STANDARD

*STANDARD MOD

*ENGINEER STD

*ENGINEER MOD

*ECONOMO

1/2 BOND

1/3 BOND

2/3 BOND

*HMOS

**U

TIL

ITY

20

Flat ArchGlen-Gery’s flat arches achieve the look of the classical jack arch without the cost of custom-made arch pieces. The voussoirsare designed with a 70°skew-back angle and 3/8"nominal mortar joint. All theflat arch pieces, except thekeystone, are the same sizeand shape and have parallelvertical sides. Please specifythe masonry opening and the face brick unit size when ordering.

Classical Jack ArchThe typical 1, 2, and 3-brick classicaljack arches, as manufactured by Glen-Gery, are calculated with a 70°skew-back angle and a 3/8" nominalmortar joint. To order a jack arch, the type of arch, masonry opening and the face brick unit size must bespecified. The jack arch brick are individually boxed and tagged for location.

FA1-K & FA1-V

STANDARD

STANDARD MOD

ENGINEER STD

ENGINEER MOD

ECONOMO

UTILITY

HMOS

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

3-5/8"

4"

2-1/4"

2-1/4"

2-3/4"

2-3/4"

3-5/8"

3-5/8"

2-3/4"

•7-5/8"

•7-5/8"

•9-1/8"

•9-1/8"

°7-5/8"

°7-5/8"

•9-1/8"

t h A B

7-13/1

6"

7-13/1

6"

9-3/8"

9-3/8"

9-3/16"

• Equals 3 courses of companion facebrick stretchers.° Equals 2 courses of companion facebrick stretchers.

FA1-K

FA1-V

A

A

MASONRY OPENING

7-5/8" (2-1/4")

9-1/8" (2-3/4")

70°

B

t

th

h

70°

10-1/4" (2-1/4")

12-3/8" (2-3/4")

15-5/8" (3-5/8")

JA1

MASONRY OPENING

JA2

12-15/16" (2-1/4")

15-9/16" (2-3/4")

19-5/8" (3-5/8")

MASONRY OPENING

JA3

MASONRY OPENING

21

Archesrick arches invoke a sense of tradition and strength and

have become a standard elementin many architectural styles. Forstructural integrity and appeal,arches should be constructed withbrick shapes to properly span theopening. Glen-Gery offers a varietyof standard arches which can beused as functional or decorativeelements in a building design.

Circular, Semi-Circular,Segmental, and Three-Centered ArchesThese arches are manufactured only from architects’ full-size details and must include the following information:1. Type of arch.2. Dimension of the masonry opening.3. Rise.4. Thickness of the mortar joint.5. Radii of the arch.6. Whether it is a one or two brick arch.7. Size of brick to be used.Glen-Gery’s team of Design Advisorswill provide technical design assistancefor arches or any other brickwork applications.

BRISE

MASONRY OPENING

SEGMENTAL ARCHC

RISE

MASONRY OPENING

CTHREE-CENTERED ARCH

CIRCULAR ARCHR

RADIUS

C

RADIUS

C SEMI-CIRCULAR ARCH

r

R

22

8-Square

8SQ7-5/8"

7-5/8"

3-5/8"

3-5/8"

8SQ-SH-CR-(LT OR RT)

8SQ-K 8SQ-O-EX

45°

6"

2-7/8"

7"

135°

6"

2"

(BOTTOM VIEW)(BOTTOM VIEW)

6"

7-5/8"

2"

6"

8SQ-O-IN 8SQ-SH

7-5/8"

3-5/8"

7-5/8"

3-5/8"

7-5/8"

7-5/8"

3-5/8" 3-5/8"

7-5/8"

3-5/8"

3/4"

7-5/8"

7-5/8"

3-5/8"

3/4"

len-Gery’s 8-Square Panelbrik®

and Stylo® were developed aslarge masonry unit alternatives forcommercial construction. These large units speed construction whileproviding a unique pattern effect forlarger structures. A system of shapesis available to enhance design flexibility. All Stylo shapes are available in wire-cut texture only.

G

*

* *

*

*

*

Not available in glazed*

Coated Brick

23

F

F

S85

2-1/4"

3-3/4"8"

1"r1"r

S4

2-1/4"

3-5/8"

7-5/8"

1"r

S2

2-1/4"

3-5/8"

7-5/8"

FS5*

2-1/4"

3-3/4"8"

1"r

*Not available in glazed

F

S10

2-1/4"

3-5/8"

7-5/8"

S3*

2-1/4"

3-3/4"

8"

S83

2-1/4"

3-5/8"

7-5/8"

F

F

S85

2-1/4"

3-3/4"8"

1"r1"r

S4

2-1/4"

3-5/8"

7-5/8"

1"r

S2

2-1/4"

3-5/8"

7-5/8"

FS5*

2-1/4"

3-3/4"8"

1"r


F

S10

2-1/4"

3-5/8"

7-5/8"

S3*

2-1/4"

3-3/4"

8"

S83

2-1/4"

3-5/8"

7-5/8"

F

F

S85

2-1/4"

3-3/4"8"

1"r1"r

S4

2-1/4"

3-5/8"

7-5/8"

1"r

S2

2-1/4"

3-5/8"

7-5/8"

FS5*

2-1/4"

3-3/4"8"

1"r


F

S10

2-1/4"

3-5/8"

7-5/8"

S3*

2-1/4"

3-3/4"

8"

S83

2-1/4"

3-5/8"

7-5/8"

F

F

S85

2-1/4"

3-3/4"8"

1"r1"r

S4

2-1/4"

3-5/8"

7-5/8"

1"r

S2

2-1/4"

3-5/8"

7-5/8"

FS5*

2-1/4"

3-3/4"8"

1"r


F

S10

2-1/4"

3-5/8"

7-5/8"

S3*

2-1/4"

3-3/4"

8"

S83

2-1/4"

3-5/8"

7-5/8"

len-Gery’s coated brick meetthe highest standards of

uniformity, quality, and durability. In addition to these brick shapes,Glen-Gery’s Hanley plant can provide custom shapes unique to its architectural line of coatedface brick.

G

** **

****

Available in glazed & engobe**

24

Custom Shapes

any interesting brickworkdesign details can beachieved with the Glen-Gery

standardized shapes illustrated inthis catalog. There are projects,however, that require a customdesigned brick shape to achieve a specific detail or unusual effect.

Glen-Gery welcomes the opportunity to produce unusualshapes, but it must be rememberedthat an intricate design demands a considerable degree of skill andexpertise to make and may takelonger to produce than a standardized shape. Custom shapes also require detailed, contractor-approved drawings prior to production.

Consult your Glen-Gery representa-tive early in the project to discussthe procedure and requirements ofspecifying Glen-Gery customshapes. Our technical staff and

manufacturing personnel standready to offer you assistance in turning your ideas into reality in themost practical and cost-effectivemanner.

Brick SculpturesThe ultimate brick shaping processtakes place when an artist uses thematerial to create beautiful bricksculptures. Each sculpture can bedesigned to meet the requirementsof the owner, the building or theenvironment, and can be executedin any size for interior and exteriorwalls or panels. From abstract torealistic, brick bas-relief adds aunique and timeless element of artistic expression to any building.Glen-Gery has experience in bringing artist and material togetherto create specialized sculptures. For more information, please contactyour Glen-Gery representative.

M

Glen-Gery Corporation

SALES/BRICK CENTERS

IOWAGlen-Gery Brick Center101 Ashworth RoadW. Des Moines, IA 50265TEL (515) 224-4110

KANSASGlen-Gery Brick Center336 S. 42nd StreetKansas City, KS 66106TEL (913) 281-2800

MICHIGANMidwest Regional Sales Office37720 Hills Tech DriveFarmington Hills, MI 48331TEL (248) 489-9338

NEW JERSEYNortheast Regional Sales Office75 Hamilton RoadHillsborough, NJ 08844TEL (908) 359-7305

PENNSYLVANIAGlen-Gery Brick Center2750 Commerce DriveTurnpike Industrial ParkMiddletown, PA 17057TEL (717) 939-6061

Glen-Gery Brick Center423 Susquehanna TrailWatsontown, PA 17777TEL (570) 742-4721

Glen-Gery Brick Center200 Hartman RoadReading, PA 19605TEL (610) 939-1721

Glen-Gery Brick Center1090 E. Boundary AvenueP.O. Box 2903York, PA 17403TEL (717) 854-8802

VIRGINIAGlen-Gery Brick Centerr9905 Godwin DriveP.O. Box 3410Manassas, VA 20108TEL (703) 368-3178

MANUFACTURING FACILITIES

Bigler PlantBigler, PA

Caledonia PlantCaledonia, OH

Capitol PlantManassas, VA

Hanley PlantSummerville, PA

Iberia PlantIberia, OH

Jersey Shale PlantHillsborough, NJ

Marseilles PlantMarseilles, IL

Mid-Atlantic PlantShoemakersville, PA

Redfield PlantRedfield, IA

York PlantYork, PA

GLEN-GERY CORPORATIONCorporate OfficeGlen-Gery Corporation1166 Spring StreetP.O. Box 7001Wyomissing, PA 19610-6001(610) 374-4011Fax: (610) 374-1622

E-Mail: [email protected]://www.glengerybrick.com

07/06 ©2006 GLEN-GERY CORPORATION PRINTED IN U.S.A.

Documents

Brick Shapes