Upload
dinhhanh
View
218
Download
3
Embed Size (px)
Citation preview
www.schutzeinrichtungen.com
209
brühl Platform elementsAccess platforms, bridges and handrails in accordance with safety standard DIN EN ISO 14122 Parts 1– 4
brühl platform elements
plat
form
elem
ents
210
www.schutzeinrichtungen.com
Along with standard safety fence systems, the company Hans Georg Brühl GmbH also manufactures access platforms, bridges and handrails. This enables us to offer the complete spectrum of safety products for machinery and facilities as a one-stop shop.
Access platform with fixed ladder for a specialised machine
Access platforms, bridges and handrails
→ Platforms are custom designed for each application.→ Platform support legs are also available with integrated
height-adjustable floor anchors.→ You can choose from a wide variety of platform floor panels
and coatings, based on your individual production conditions.→ Handrails can be top-mounted to the floor panels and/or
side-mounted to the outside of the frame.
→ Kick plates, rest platforms and bridges can be custom- designed to your specifications in accordance with DIN EN 14122.
→ Access platforms can be installed in combination with hinged and sliding doors.
→ Platforms, bridges and handrails are available in all RAL colours or with a hot-dip galvanised finish. B See page 238.
Product advantages and features of all models at-a-glance:
brühl platform elements
211
www.schutzeinrichtungen.com
Permanent Means of Access to Machinery
Various Means of Access Steps (T) and Inclined Ladders (TL)
A Ramp, A should be used For Stairs (T) For Inclined Ladders (TL)
B Ramp with slip-resistant surfacing Tread depth t ≥ 80 mm ≥ 80 mm
C Stairs Rise h ≤ 250 mm ≤ 250 mm
D Stairs, D should be used Nosing r ≥ 10 mm ≥ 10 mm
E Stairs Tread width w 600 to 1200 mm 450 to 800 mm
F Inclined ladder Headroom e ≥ 2300 mm ≥ 2300 mm
G Inclined ladder (only when space is limited) Stair clearance c ≥ 850 mm ≥ 850 mm
H Fixed ladder, H should be used Total rise H ≤ 3000 mm ≤ 3000 mm
Fixed vertical ladder
75°90°H
G
FE
D
C
B
A
60°
45°38°
30°
20°
10°
0°
Step size rule for stairs: g + 2h = 630 ± 30Should be used
Fixed inclined ladder
Stairs
Ramp
As per DIN EN ISO 14122-1: 2001 As per DIN EN ISO 14122-1: 2001
h
rt
g
pw
H
e
c
plat
form
elem
ents
brühl platform elements
212
www.schutzeinrichtungen.com
Product Overview: Access Platforms
Maintenance platform for a conveyor system with connected safety fence
Floor panels
Frame element
Support legs
Stair railing
Stairs
Railing
brühl platform elements
213
www.schutzeinrichtungen.com
Frame elements
Platform support legs
Floor anchors with height adjustment
Support legs without height adjustment
plat
form
elem
ents
brühl platform elements
214
www.schutzeinrichtungen.com
Sheet metal
Sheet metal floor covering as base for other floor coverings/coatings
Phenolic plywood
Thickness: 12 mm
Laminated wood
Thickness: 12 mm
Chequer plate aluminium
Thickness: 5 mm Slip resistance: R11 to R13
Chequer plate steel
Thickness: 5 mm Slip resistance: R11 to R13
Anti-skid grating
Load-bearing bar: 30/2 (load-bearing bars and cross bars are notched) Mesh size: 30/30 Slip resistance: R11 to R13
Press-welded grating
t
Load-bearing bar: 30/2 Mesh size: 30/30 Slip resistance: R11 to R13 also as anti-skid protection
Platform floor panels and coatings
Sheet metal with slip-resistant paint
Slip-resistant paint optional for providing additional slip resistance “on” sheet metal flooring
brühl platform elements
215
www.schutzeinrichtungen.com
Handrail for mounting to the surface of concrete floors or platforms, with kick plate; constructed from steel tube (ø = 48.3 mm and 26.9 mm)
Product group: GL-V2
Handrail for mounting to the surface of concrete floors or platforms, without kick plate; constructed from steel tube (ø = 48.3 mm and 26.9 mm)
Product group: GL-V1
Handrail for side mounting, without kick plate; constructed from steel tube (ø = 48.3 mm and 26.9 mm)
Product group: GL-V3
Reinforced handrail for mounting to the surface of concrete floors or platforms, with kick plate; constructed from steel tube (ø = 114 mm)
Product group: GL-V5
Handrail for side mounting, with kick plate; constructed from steel tube (ø = 48.3 mm and 26.9 mm)
Product group: GL-V4
Handrails
As per DIN EN ISO 14122-3: 2001
Application and safety requirements for handrails used with inclined ladders
1 Handrail2 Knee rail3 Kick plate4 Stanchions5 Walking surface
→ If the fall-height is greater than 500 mm a handrail must be installed.
→ A handrail is required if the distance between the platform and the machine or wall is greater than 200 mm or if the protection provided by the machine is not equivalent to that of a handrail. A kick plate is required if the distance between the platform and the support frame-work is greater than 30 mm.
1100
min
.
10 m
ax.
500
max
.
100
min
.
500
max
.
75 min.–120 max.1
2
35
4
plat
form
elem
ents
brühl platform elements
216
www.schutzeinrichtungen.com
Position of a handrail on an inclined ladder
Handrail clearance
Examples of distances between the pitch line and the axis of the handrail for an inclined ladder
0 (degrees) x (mm)
60° 250
65° 200
70° 150
75° 100
100minx
0
1000�
Stairs / Inclined LaddersThe strings are constructed from folded plate. The steps are available with grating or chequer plate. All measurements are variable and dependent on the application.
Product group: T / TL / TGL
Stairs
As per DIN EN ISO 14122-3: 2001
Stair railing (TGL) Stairs (T)
stairs / inclined ladders
Permanent Means of Access to Machinery – Stairs and Inclined Ladders
Use of handrails with stairs and inclined ladders Use of handrails with stairs
→ Stairs must have at least one handrail. Stairs with a useable stair width greater than or equal to 1200 mm must have two handrails.
→ If the total rise is more than 500 mm and there is an open space of more than 200 mm beside the string, a handrail must be mounted on this side of the stairs for protection.
2300
min
.
A
3000
max
.
100
min
.
1100
min
.
900-
1000
500 max
.500 m
ax.
ø 25-50
217
www.schutzeinrichtungen.com
Permanent Means of Access to Machinery – Fixed Ladders
1 Handrail connection2 Barrier3 Obstruction (irregularly occurring)4 Maximum open space
(less than or equal to 0.4 m2)5 Transition bridge
→ The climbing height h must be no greater than 6000 mm. For single-section ladders (no rest platform) the allowable distance h between the surface of entry and the surface of exit is increased to 10000 mm. Rungs must have a non-slip surface
Fixed Ladders
Fixed LaddersLadder treads have a slip-resistant profile.
Fixed ladder with safety cageFixed ladder with safety cage. Ladder treads have a slip-resistant profile.
Fixed ladder with safety cage and fall protectionFixed ladder equipped with an additional safety cage and fall protection. Ladder treads have a slip-resistant profile.
Product group: SL-V1 Product group: SL-V2 Product group: SL-V3
As per DIN EN ISO 14122-4: 2001
fixed ladders
2200
min
.
H m
ax. =
100
00 /
h m
ax. =
600
0
h m
ax. =
600
0
1100
min
.
1500
max
.
200 min.
700 min.150 min.
600 min.
300
3000
max
.
2200
min
.30
00 m
ax.
400 min.600 max.
225
min
.30
0 m
ax.
500
min
.70
0 m
ax.
D m
in. =
650
D m
ax. =
800
max
.
5
2200
min
.
H m
ax. =
100
00 /
h m
ax. =
600
0
h m
ax. =
600
0
1100
min
.
1500
max
.
200 min.
700 min.150 min.
600 min.
300
3000
max
.
2200
min
.30
00 m
ax.
400 min.600 max.
225
min
.30
0 m
ax.
500
min
.70
0 m
ax.
D m
in. =
650
D m
ax. =
800
max
.
1
2
3
3
4
plat
form
elem
ents
218
www.schutzeinrichtungen.com
Bridge with handrail
Bridge with safety fence
Bridge without handrail
bridges
BridgesC Bridges are constructed in accordance with the individual application.