Brady B-595 Indoor/Outdoor Vinyl Tape for the GlobalMark® Printer

www.bradyid.com

Size & Material Catalog Number

Size Material White Yellow Red Blue Green Black Brown Gold Gray Purple Orange Clear

4"x100' B-588 NewB-595

76542113109

76547113114

76552113119

76560113127

76556113123

76564113131

76568113135

76572113139

76576113143

76590113147

76594113151

97734113105

3"x100' B-588 NewB-595

76543113110

76548113115

––

––

––

––

––

––

––

––

––

––

2.25"x100' B-588 NewB-595

76544113111

76549113116

76553113120

76561113128

76557113124

76565113132

76569113136

76573113140

76577113144

76591113148

76595113152

97735113106

1.125"x100'B-588 NewB-595

76545113112

76550113117

76554113121

76562113129

76558113125

76566113133

76570113137

76574113141

76578113145

76592113149

76596113153

97736113107

0.5"x100' B-588 NewB-595

76546113113

76551113118

76555113122

76563113130

76559113126

76567113134

76571113138

76575113142

76579113146

76593113150

76597113154

97737113108

*B-595 parts available March 1, 2010. B-588 parts will be available while supplies last.

■■ Adherestopipes,walls,equipment--mostcleandrysurfaces■■ Conformstorough,curvedandhighlytexturedsurfaces■■ Standsuptogrease,oilandmostindustrialchemicals■■ 8–10yearoutdoordurabilityinaveragetemperaturesfrom-40ºFto180ºF

NEW B-595 Continuous Vinyl Tape

BeginningMarch1,2010,Brady’sleadingoutdoorgradevinylfortheGlobalMark®PrinterisbeingreplacedbyanewB-595vinyl.ThisnewvinylhasevenbetterperformanceandthemostaggressiveadhesiveeverofferedfortheGlobalmark®Printer–allatthesamepriceandrolllength.ThesenewB-595labelingsuppliesareidealforindoorandoutdoorfacilitylabels,including5Slabels,safetylabels,warninglabels,pipemarkers,arcflashlabels,equipmentlabels,andvisualworkplacelabels.

Withtheadvancedadhesiveandlow-shrinkconstruction,newB-595vinylisnowalsorecommendedfor“problemapplications”thatprovedifficultformosttypicalvinylmaterials:■■ More Aggressive Adhesive:B-595vinylwilladheretodifficultlowsurface

energyitems,including:PVCpiping,blow-moldedequipmentcases,ABSplastics,powder-coatedsurfacesandequipmentmadefromrecycledplastics.TheB-595materialalsoexcelsatstickingtohighlytexturedsurfacessuchaspaintedcinderblockwalls,finishedunevenwood,texturedplastics,rough-pipesandpaper-jacketedpipes.

■■ Lower Application Temperature:B-595vinylcanbeappliedat0ºFinsteadof40ºForabove(servicetempremains-40ºFto180ºF).

■■ Low-Shrink Vinyl:B-595vinyldiminishesunsightlybuildupofdustandgrimearoundthelabeledgethatistypicallyseenwithvinyllabels.Italsoreducesadhesivebuildupinprintermechanisms.

Visit www.bradyid.com/globalmark for more details on additional tapes for your

GlobalMark® Printer.

BradyWorldwide,Inc.6555W.GoodHopeRoadMilwaukee,WI532231-888-272-3946www.bradyid.com

BradyCanada355AppleCreekBlvd.Markham,ONL3R9X71-800-263-6179www.bradycanada.ca

©2010BradyWorldwide,Inc.AllRightsReserved

Size & Material Catalog Number

Size MaterialNFPA Diamond w/Text Area

NFPA Diamond Diamond Only

Color Bar w/Text Area

Color Bar Color Bar Only

Color Bar HMIG Format

NFPA Diamond NFR Label

21⁄4"x4" B-588(240/roll) NewB-595

76732115766

––

76730115767

––

––

––

4"x61⁄4" B-588(170/roll) NewB-595

76733115763

––

76731115764

––

––

––

4"x4" B-588(240/roll) NewB-595

––

76729115765

––

––

––

––

21⁄4"x21⁄4" B-588(365/roll) NewB-595

51860115772

51861115773

51854115771

76734115768

––

––

11⁄8"x3" B-588(300/roll) NewB-595

––

––

––

––

76735115770

76736115769

Catalog # Description

96089 4.11”x200’RTKBlackRibbon

■■ ColorBarorNFPA704Mdiamondformats■■ 4colordiamondorbarsarepre-printedsotheseonlyrequire1-color

printpass(black)throughprinter

■■ Pre-printedcontinuousstripeontopportionofwhitevinyl.

■■ IdealforprintingArcFlashlabelsandothersignsusingMarkware™Software

NEW Right-to-Know Pre-Print Labels For GlobalMark® Printer

NEW Pre-Print Header Stripe Labels For Arc Flash And Signs

Other Supplies Also Available for GlobalMark® Printer

Size & Material Catalog Number

Tape Size Stripe Width Material Red Stripe Orange Stripe Yellow Stripe

4"x100' 1" B-588 NewB-595

101948113161

101949113162

105045113163

3"x100' .75" B-588 NewB-595

101946113157

101947113158

105044113159

2.25"x100' .50" B-588 NewB-595

101944113155

101945113156

105043115774

Polyester Tapes

Phosphorescent Tapes

Reflective Tapes

Repositionable Tapes

Tag Stock Magnetic Stock

*B-595 parts available March 1, 2010. B-588 parts will be available while supplies last.

*B-595 parts available March 1, 2010. B-588 parts will be available while supplies last.

Special Black Ribbon Required For RTK Labels:Pre-PrintedRight-To-KnowLabelsrequiretheuseofribbonCatalogNumber96089.

Y1162974 MS1162974

Brady B-595 Indoor/Outdoor Vinyl Tape for the MiniMark™ Printer

www.bradyid.com

Size & Material Catalog Number

Size Material White Yellow Red Blue Green Black Brown Gold Gray Purple Orange Clear

4"x100' B-588 NewB-595

102976113182

102977113191

102978113196

102980113208

102979113204

102982113212

102985115759

102984115755

102983113218

102986113216

102981113200

102975113187

3"x100' B-588 NewB-595

102987113183

102988113192

––

––

––

––

––

––

––

––

––

––

2.25"x100' B-588 NewB-595

102964113184

102965113193

102966113197

102968113209

102967113205

102970113213

102973115760

102972115756

102971113219

102974113217

102969113201

102963113188

1.125"x100'B-588 NewB-595

102952113185

102953113194

102954113198

102956113210

102955113206

102958113214

102961115761

102960115757

102959115753

102962115751

102957113202

102951113189

0.5"x100' B-588 NewB-595

102940113186

102941113195

102942113199

102944113211

102943113207

102946113215

102949115762

102948115758

102947115754

102950115752

102945113203

102939113190

*B-595 parts available March 1, 2010. B-588 parts will be available while supplies last.

■■ Adherestopipes,walls,equipment--mostcleandrysurfaces■■ Conformstorough,curvedandhighlytexturedsurfaces■■ Standsuptogrease,oilandmostindustrialchemicals■■ 8–10yearoutdoordurabilityinaveragetemperaturesfrom-40ºFto180ºF

NEW B-595 Continuous Vinyl Tape

BeginningMarch1,2010,Brady’sleadingoutdoorgradevinylfortheMiniMark™PrinterisbeingreplacedbyanewB-595vinyl.ThisnewvinylhasevenbetterperformanceandthemostaggressiveadhesiveeverofferedfortheMiniMark™Printer–allatthesamepriceandrolllength.ThesenewB-595labelingsuppliesareidealforindoorandoutdoorfacilitylabels,including5Slabels,safetylabels,warninglabels,pipemarkers,arcflashlabels,equipmentlabels,andvisualworkplacelabels.

Withtheadvancedadhesiveandlow-shrinkconstruction,newB-595vinylisnowalsorecommendedfor“problemapplications”thatprovedifficultformosttypicalvinylmaterials:■■ More Aggressive Adhesive:B-595vinylwilladheretodifficultlowsurface

energyitems,including:PVCpiping,blow-moldedequipmentcases,ABSplastics,powder-coatedsurfacesandequipmentmadefromrecycledplastics.TheB-595materialalsoexcelsatstickingtohighlytexturedsurfacessuchaspaintedcinderblockwalls,finishedunevenwood,texturedplastics,rough-pipesandpaper-jacketedpipes.

■■ Lower Application Temperature:B-595vinylcanbeappliedat0ºFinsteadof40ºForabove(servicetempremains-40ºFto180ºF).

■■ Low-Shrink Vinyl:B-595vinyldiminishesunsightlybuildupofdustandgrimearoundthelabeledgethatistypicallyseenwithvinyllabels.Italsoreducesadhesivebuildupinprintermechanisms.

Visit www.bradyid.com/minimark for more details on additional tapes for your

MiniMark™ Printer.

BradyWorldwide,Inc.6555W.GoodHopeRoadMilwaukee,WI532231-888-272-3946www.bradyid.com

BradyCanada355AppleCreekBlvd.Markham,ONL3R9X71-800-263-6179www.bradycanada.ca

©2010BradyWorldwide,Inc.AllRightsReserved

■■ Pre-printedcontinuousstripeontopportionofwhitevinyl.

■■ IdealforprintingArcFlashlabelsandothersignsusingMarkware™Software

NEW Pre-Print Header Stripe Labels For Arc Flash And Signs

Other Supplies Also Available for MiniMark™ Printer

Size & Material Catalog Number

Tape Size Stripe Width Material Red Stripe Orange Stripe Yellow Stripe

4"x100' 1" B-588 NewB-595

103012113221

103010113222

102996113220

3"x100' .75" B-588 NewB-595

103013113225

103011113227

102995113226

2.25"x100' .50" B-588 NewB-595

110347113230

110348113228

110349113229

Self-Laminating Cable & Wire Markers Tamper-Resistant Metallized Polyester

*B-595 parts available March 1, 2010. B-588 parts will be available while supplies last.

Get the most out of your MiniMark™ Printer and B-595 Vinyl Tapes by using Markware™ Facility Identification Software. ■■ ForAllYourSafetyandFacilityIdentificationNeedsinOnePowerfulPackage.

■■ UseyourPCtoquicklydesignprofessionallookingsignsandlabels,orfreelycustomizelabellayoutstoyourownspecifications.ThenprintdirectlytoyourMiniMark™Printer!

Y1162975 MS1162975

Brady B-595 Vinyl Film With Permanent Adhesive

TDS No. B-595 Effective Date: 05-Feb-2010

Description:Brady B-595 indoor/outdoor marking film is a high gloss, durable, flexible, pressure sensitive adhesive product, designed for use in cartridge form with the GlobalMarkr® Industrial Label Maker and MiniMark™ Industrial Label Printer.

Details:Use:Brady-595 is used for Pipemarkers, Arrow Tape, Warehouse Marking, Warning Panels and Safety Signs, Arc Flash, Visual Workplace labels,

Special Properties:Permanent cold temperature applicable pressure sensitive acrylic

Substrate Type:Vinyl film

Standard Material Colors:White, red, yellow, green, blue, orange, black, gray, brown, gold, purple, clear.

Standard Legend Colors:Black, white, red, green, blue, and magenta

Thickness (PSTC-133): 0.004 in.(0.10 mm)

Adhesive Properties:Adhesion to Steel (PSTC-101) 15 Minute Dwell (Avg.) – 80 oz/in (87.5 N/100mm) Ultimate Dwell (72 Hrs.) 85 oz/in (93 N/100mm) Tack (ASTM D 2979) (Avg) 1100 g (10.5 N)

Adhesion to Powder Coated Metal (PSTC-101)15 Minute Dwell (Avg.) 60 oz/in (65 N/100mm)Ultimate Dwell (72 Hrs.) 75 oz/in (82 N/100mm)

Adhesion to Polypropylene (PSTC-101)15 Minute Dwell (Avg) 60oz/in (65 N/100mm)Ultimate Dwell (72 Hrs.) (Avg) 69 oz/in (75 N/100mm)Adhesion to Textured ABS (PSTC-101)15 Minute Dwell (Avg) 37 oz/in (40 N/100mm)Ultimate Dwell (72 Hrs.) (Avg) 40 oz/in (44 N/100mm)

Adhesion to Glass (PSTC-101)15 Minute Dwell (Avg) 82 oz/in (90 N/100mm) Ultimate Dwell (72 Hrs.) (Avg) 88 oz/in (96 N/100mm)

Note------Not recommended for Bare concrete or Unpainted Wood

Abrasion Resistance (Method 5306 of U.S. Federal Test Method Std. No. 191A):CS-10 wheels, 500 g wts.The printed legend withstands up to 250 cycles.

Gloss (ASTM D 523): 60 ° 50 Gardner Units minimum

Minimum Application Temperature:0°F (-18°C)

Service Temperature:-40°F to 180°F (-40°C to 82°C)

Average Outdoor Durability:8-10 years (Average expected outdoor life of product will depend on user definition of failure, climatic conditions, mounting techniques and material color.) Ribbon and material UV resistance does not represent ribbon wear. A polyester overlaminate is recommended for harsh environments - long term exposure to wind and rain.Chemical Resistance:

NE = No EffectNT = Not TestedF = Failed (affected Sample)

7 Day Immersion: Immersed in reagent for 7 days.Dip Test: Five 10 minute dips in reagent with 30 minute recovery.Rub Test: Rubbed sample for up to 100 rubs on Sutherland Ink Rub Tester

Shelf Life:1 year when stored at 70°F (21°C) and 40% to 50% R.H.

REAGENT 7 DAY IMMERSION DIP TEST Sutherland RUB TEST30% Sulfuric Acid NE NE NE10% Sulfuric Acid NE NE NE30% HCI NE NE NE10% HCI NE NE NE50% NaOH NE NE NE10% NaOH F NE FMethyl Ethyl Ketone F F FAcetone F F F10% Sodium Hypocholirite FMethanol F NE FIPA (Isopropanol) F NE NEASTM #3 Oil NE NE NESAE 20 Oil NE NE NEAlconox® NE NE NEToluene F F FMineral Spirits F F NEGlacial Acetic Acid F F NE5% Acetic Acid NE NE NEDiesel Fuel F F NEHeptane F NE NE 10% Ammonia NE NE FTurpentine F F NEKerosene F F NEWater NE NE FGasoline F F F

Trademarks:ANSI: American National Standards Institute (U.S.A.)ASTM: American Society for Testing and Materials (U.S.A.)Alconox® is a registered trademark of Alconox Co.Fed. Spec.: United States Federal Specification (U.S.A.)Globalmark® is a registered trademark of Brady Worldwide, Inc.HandiMark® is a registered trademark of Brady Worldwide, Inc.Labelizer® is a registered trademark of Brady Worldwide, Inc.MINIMARK™ is a trademark of Brady Worldwide, Inc.PSTC: Pressure Sensitive Tape Council (U.S.A.)Powermark™ is a trademark of Brady Worldwide, Inc.SAE: Society of Automotive Engineers (U.S.A.)

Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.

WARRANTYBrady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under

no circumstances will Brady be liable for any loss, damage, expense, or consequential damages of any kind arising in connection with the use, or inability to use, Brady's products.

Copyright 2009 Brady Worldwide, Inc. | All Rights ReservedMaterial may not be reproduced or distributed in any form without written permission.

Brady North America | 6555 W. Good Hope Rd | Milwaukee, WI 53223 | USA | Tel: 414-358-6600 | Fax: 800-292-2289Y1162976 MS1162976© 2010 Brady Worldwide, Inc. All Rights Reserved

Material may not be reproduced or distributed in any form without written permission.

material color.) Ribbon and material UV resistance does not represent ribbon wear. A polyester overlaminate is recommended for harsh environments - long term exposure to wind and rain.Chemical Resistance:

NE = No EffectNT = Not TestedF = Failed (affected Sample)

7 Day Immersion: Immersed in reagent for 7 days.Dip Test: Five 10 minute dips in reagent with 30 minute recovery.Rub Test: Rubbed sample for up to 100 rubs on Sutherland Ink Rub Tester

Shelf Life:1 year when stored at 70°F (21°C) and 40% to 50% R.H.

REAGENT 7 DAY IMMERSION DIP TEST Sutherland RUB TEST30% Sulfuric Acid NE NE NE10% Sulfuric Acid NE NE NE30% HCI NE NE NE10% HCI NE NE NE50% NaOH NE NE NE10% NaOH F NE FMethyl Ethyl Ketone F F FAcetone F F F10% Sodium Hypocholirite FMethanol F NE FIPA (Isopropanol) F NE NEASTM #3 Oil NE NE NESAE 20 Oil NE NE NEAlconox® NE NE NEToluene F F FMineral Spirits F F NEGlacial Acetic Acid F F NE5% Acetic Acid NE NE NEDiesel Fuel F F NEHeptane F NE NE 10% Ammonia NE NE FTurpentine F F NEKerosene F F NEWater NE NE FGasoline F F F

Trademarks:ANSI: American National Standards Institute (U.S.A.)ASTM: American Society for Testing and Materials (U.S.A.)Alconox® is a registered trademark of Alconox Co.Fed. Spec.: United States Federal Specification (U.S.A.)Globalmark® is a registered trademark of Brady Worldwide, Inc.HandiMark® is a registered trademark of Brady Worldwide, Inc.Labelizer® is a registered trademark of Brady Worldwide, Inc.MINIMARK™ is a trademark of Brady Worldwide, Inc.PSTC: Pressure Sensitive Tape Council (U.S.A.)Powermark™ is a trademark of Brady Worldwide, Inc.SAE: Society of Automotive Engineers (U.S.A.)

Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.

WARRANTYBrady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under

material color.) Ribbon and material UV resistance does not represent ribbon wear. A polyester overlaminate is recommended for harsh environments - long term exposure to wind and rain.Chemical Resistance:

NE = No EffectNT = Not TestedF = Failed (affected Sample)

7 Day Immersion: Immersed in reagent for 7 days.Dip Test: Five 10 minute dips in reagent with 30 minute recovery.Rub Test: Rubbed sample for up to 100 rubs on Sutherland Ink Rub Tester

Shelf Life:1 year when stored at 70°F (21°C) and 40% to 50% R.H.

REAGENT 7 DAY IMMERSION DIP TEST Sutherland RUB TEST30% Sulfuric Acid NE NE NE10% Sulfuric Acid NE NE NE30% HCI NE NE NE10% HCI NE NE NE50% NaOH NE NE NE10% NaOH F NE FMethyl Ethyl Ketone F F FAcetone F F F10% Sodium Hypocholirite FMethanol F NE FIPA (Isopropanol) F NE NEASTM #3 Oil NE NE NESAE 20 Oil NE NE NEAlconox® NE NE NEToluene F F FMineral Spirits F F NEGlacial Acetic Acid F F NE5% Acetic Acid NE NE NEDiesel Fuel F F NEHeptane F NE NE 10% Ammonia NE NE FTurpentine F F NEKerosene F F NEWater NE NE FGasoline F F F

Trademarks:ANSI: American National Standards Institute (U.S.A.)ASTM: American Society for Testing and Materials (U.S.A.)Alconox® is a registered trademark of Alconox Co.Fed. Spec.: United States Federal Specification (U.S.A.)Globalmark® is a registered trademark of Brady Worldwide, Inc.HandiMark® is a registered trademark of Brady Worldwide, Inc.Labelizer® is a registered trademark of Brady Worldwide, Inc.MINIMARK™ is a trademark of Brady Worldwide, Inc.PSTC: Pressure Sensitive Tape Council (U.S.A.)Powermark™ is a trademark of Brady Worldwide, Inc.SAE: Society of Automotive Engineers (U.S.A.)

Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.

WARRANTYBrady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under

Brady Worldwide, Inc. 6555 W. Good Hope Road Milwaukee, WI 53223 1-888-272-3946 www.bradyid.com

Brady Canada 355 Apple Creek Blvd. Markham, ON L3R 9X7 1-800-263-6179 www.bradycanada.com

material color.) Ribbon and material UV resistance does not represent ribbon wear. A polyester overlaminate is recommended for harsh environments - long term exposure to wind and rain.Chemical Resistance:

NE = No EffectNT = Not TestedF = Failed (affected Sample)

7 Day Immersion: Immersed in reagent for 7 days.Dip Test: Five 10 minute dips in reagent with 30 minute recovery.Rub Test: Rubbed sample for up to 100 rubs on Sutherland Ink Rub Tester

Shelf Life:1 year when stored at 70°F (21°C) and 40% to 50% R.H.

REAGENT 7 DAY IMMERSION DIP TEST Sutherland RUB TEST30% Sulfuric Acid NE NE NE10% Sulfuric Acid NE NE NE30% HCI NE NE NE10% HCI NE NE NE50% NaOH NE NE NE10% NaOH F NE FMethyl Ethyl Ketone F F FAcetone F F F10% Sodium Hypocholirite FMethanol F NE FIPA (Isopropanol) F NE NEASTM #3 Oil NE NE NESAE 20 Oil NE NE NEAlconox® NE NE NEToluene F F FMineral Spirits F F NEGlacial Acetic Acid F F NE5% Acetic Acid NE NE NEDiesel Fuel F F NEHeptane F NE NE 10% Ammonia NE NE FTurpentine F F NEKerosene F F NEWater NE NE FGasoline F F F

Trademarks:ANSI: American National Standards Institute (U.S.A.)ASTM: American Society for Testing and Materials (U.S.A.)Alconox® is a registered trademark of Alconox Co.Fed. Spec.: United States Federal Specification (U.S.A.)Globalmark® is a registered trademark of Brady Worldwide, Inc.HandiMark® is a registered trademark of Brady Worldwide, Inc.Labelizer® is a registered trademark of Brady Worldwide, Inc.MINIMARK™ is a trademark of Brady Worldwide, Inc.PSTC: Pressure Sensitive Tape Council (U.S.A.)Powermark™ is a trademark of Brady Worldwide, Inc.SAE: Society of Automotive Engineers (U.S.A.)

Note: All values shown are averages and should not be used for specification purposes. Test data and test results contained in this document are for general information only and shall not be relied upon by Brady customers for designs and specifications, or be relied on as meeting specified performance criteria. Customers desiring to develop specifications or performance criteria for specific product applications should contact Brady for further information.

Product compliance information is based upon information provided by suppliers of the raw materials used by Brady to manufacture this product or based on results of testing using recognized analytical methods performed by a third party, independent laboratory. As such, Brady makes no independent representations or warranties, express or implied, and assumes no liability in connection with the use of this information.

WARRANTYBrady products are sold with the understanding that the buyers will test them in actual use and determine for themselves their adaptability to their intended uses. Brady warrants to the buyers that its products are free from defects in material and workmanship, but limits its obligation under this warranty to replacement of the product shown to Brady's satisfaction to have been defective at the time Brady sold it. This warranty does not extend to any persons obtaining the product from the buyers. This warranty is in lieu of any other warranty, express or implied, including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose, and of any other obligations or liability on Brady's part. Under