Upload
wdavid81
View
5
Download
0
Embed Size (px)
DESCRIPTION
Tube Fittings
Citation preview
Sri Takada Industries (Malaysia) Sdn. Bhd.Project : BIOCON - F22A/C/D – SPECIALITY GAS SYSTEMS, ALL CLEAN PIPING AND SS PIPING WORKSRe : Fittings
Sum of QTY.
TYPE MATERIAL & DIM. STD. NOTE SIZE (MM) ENDSTHICK (mm) / SCH.
Rating UNIT Total
45° Elbow, LR (ERW)
ASTM A270 Suppliment 2, SS316L, ASME BPE 2009, Material as per Table DT-3, Dimension as per ASME BPE 2009, Table DT-7
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
25.4 Square Ends 1.65 Table DT-2 pcs 0
38.1 Square Ends 1.65 Table DT-2 pcs 150.8 Square Ends 1.65 Table DT-2 pcs 2
45° Elbow, LR (SMLS)
ASTM A270 Suppliment 2, SS316L, ASME BPE 2009, Material as per Table DT-3, Dimension as per ASME BPE 2009, Table DT-7
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
12.7 Square Ends 1.65 Table DT-2 pcs 0
19.05 Square Ends 1.65 Table DT-2 pcs 090° Elbow, LR (ERW)
ASTM A270 Suppliment - 2SS 316L , ASME BPE 2009, Material as per Table DT-3' Dimension as per ASME BPE 2009, Table DT-7
Surface finish : Internal mill Finish and External Matt Finish
25.4 Square Ends 1.65 - pcs 6
38.1 Square Ends 1.65 - pcs 3550.8 Square Ends 1.65 - pcs 076.2 Square Ends 1.65 - pcs 0
SS 304, Dimension as per ASME BPE 2009 Table DT-7
- 25.4 Square Ends 1.65 - pcs 132
38.1 Square Ends 1.65 - pcs 4450.8 Square Ends 1.65 - pcs 24
ASTM A270 Suppliment 2, SS316L, ASME BPE 2009, Material as per Table DT-3, Dimension as per ASME BPE 2009, Table DT-7
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
19.05 Square Ends 1.65 Table DT-2 pcs 12
25.4 Square Ends 1.65 Table DT-2 pcs 44338.1 Square Ends 1.65 Table DT-2 pcs 61750.8 Square Ends 1.65 Table DT-2 pcs 25363.5 Square Ends 1.65 Table DT-2 pcs 6676.2 Square Ends 1.65 Table DT-2 pcs 134101.6 Square Ends 2.11 Table DT-2 pcs 14
90° Elbow, LR (SMLS)
ASTM A270 Suppliment - 2SS 316L , ASME BPE 2009, Material as per Table DT-3' Dimension as per ASME BPE 2009, Table DT-7
Surface finish : Internal mill Finish and External Matt Finish
12.7 Square Ends 1.65 - pcs 4
19.05 Square Ends 1.65 - pcs 1625.4 Square Ends 1.65 - pcs 2438.1 Square Ends 1.65 - pcs 1
SS 316L, Double ferrule compression type with back ferrule (Compression fittings) Hardness 80 HRBSuitable for swaging
- 12.7 PE 0.083 - pcs 77
19.05 PE 0.109 - pcs 60ASTM A270 Suppliment 2, SS316L, ASME BPE 2009, Material as per Table DT-3, Dimension as per ASME BPE 2009, Table DT-7
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
12.7 Square Ends 1.65 Table DT-2 pcs 11
19.05 Square Ends 1.65 Table DT-2 pcs 120Cap, End (SMLS) SS 316L, Double ferrule
compression type with back ferrule (Compression fittings) Hardness 80 HRBSuitable for swaging
- 12.7 - 0.083 - pcs 3
19.05 - 0.109 - pcs 8Cap, End (ERW) SS304, Dimension as per ASME
BPE 2009 Table DT-7 to Table DT -30
- 25.4 - 1.65 - pcs 3
38.1 - 1.65 - pcs 150.8 - 1.65 - pcs 6
SS316L,ASME BPE-2009Dimension as per ASME BPE 2009 Table - DT -30
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
25.4 - 1.65 Table DT-2 pcs 3
38.1 - 1.65 Table DT-2 pcs 3
1 / 7
Sri Takada Industries (Malaysia) Sdn. Bhd.Project : BIOCON - F22A/C/D – SPECIALITY GAS SYSTEMS, ALL CLEAN PIPING AND SS PIPING WORKSRe : Fittings
Sum of QTY.
TYPE MATERIAL & DIM. STD. NOTE SIZE (MM) ENDSTHICK (mm) / SCH.
Rating UNIT Total
Connectors, Female SS 316L, Seamless, Swagelok/Eq. Tubing Std.
- 12.7 NPT, Double ferrule compression type with back ferrule
- - pcs 15
19.05 NPT, Double ferrule compression type with back ferrule
- - pcs 10
25.4 NPT, Double ferrule compression type with back ferrule
- - pcs 0
Connectors, Male SS 316L, Seamless, Swagelok/Eq. Tubing Std.
- 12.7 NPT, Double ferrule compression type with back ferrule
- - pcs 50
19.05 NPT, Double ferrule compression type with back ferrule
- - pcs 10
25.4 NPT, Double ferrule compression type with back ferrule
- - pcs 0
Ferrule (ERW) SS304, Dimension as per ASME BPE 2009 or later, Table DT-5.1,Table DT-22 (B-Type)
- 25.4 - 1.65 - pcs 92
38.1 - 1.65 - pcs 38SS 316L, ASME BPE 2009, Material as per Table DT-3, Dimension as per ASME BPE 2009, Table DT-22 (Type-B) & Table DT-5.1
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
25.4 - 1.65 Table DT-2 pcs 369
38.1 - 1.65 Table DT-2 pcs 71550.8 - 1.65 Table DT-2 pcs 44863.5 - 1.65 Table DT-2 pcs 7676.2 - 1.65 Table DT-2 pcs 98101.6 - 2.11 Table DT-2 pcs 16
Ferrule (SMLS) SS 316L, ASME BPE 2009, Material as per Table DT-3, Dimension as per ASME BPE 2009, Table DT-22 (Type-B) & Table DT-5.1
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
9.5 - - Table DT-2 pcs 5
12.7 - 1.65 Table DT-2 pcs 8- Table DT-2 pcs 5
19.05 - 1.65 Table DT-2 pcs 70- Table DT-2 pcs 20
SS316L, ASTM A270, Dimension as per ASME BPE 2009, Table DT-5.1,Table DT-22 (B-Type)
- 9.5 - 1.65 - pcs 3
12.7 - 1.65 - pcs 319.05 - 1.65 - pcs 1325.4 - 1.65 - pcs 2138.1 - 1.65 - pcs 15
Ferrule, Blind (SMLS) SS316L, ASTM A270, Dimension as per ASME BPE 2009 or later, Table DT-5.1,Table DT-22 (B-Type)
- 25.4 - 1.65 - pcs 4
38.1 - 1.65 - pcs 38Ferrule, Blind (ERW) SS 316L, ASME BPE 2009,
Material as per Table DT-3, Dimension as per ASME BPE 2009, Table DT-22 (Type-B) & Table DT-5.1
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
25.4 - 1.65 Table DT-2 pcs 4
50.8 - 1.65 Table DT-2 pcs 54Instrument Tee (ERW)
ASTM A270 Suppliment - 2SS 316L , ASME BPE 2009, Material as per Table DT-3' Dimension as per ASME BPE 2009, Table DT-28
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
12.7 X 38.1(Run Size
12.7)
Ferrule End (Branch) X Square End (Header)
1.65 Table DT-2 pcs 1
ASTM A270 Suppliment - 2SS 316L , ASME BPE 2009, Material as per Table DT-3' Dimension as per ASME BPE 2009, Table DT-29
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
38.1 X 50.8(Run Size
38.1)
Ferrule End 1.65 Table DT-2 pcs 1
2 / 7
Sri Takada Industries (Malaysia) Sdn. Bhd.Project : BIOCON - F22A/C/D – SPECIALITY GAS SYSTEMS, ALL CLEAN PIPING AND SS PIPING WORKSRe : Fittings
Sum of QTY.
TYPE MATERIAL & DIM. STD. NOTE SIZE (MM) ENDSTHICK (mm) / SCH.
Rating UNIT Total
Nipple (SMLS) ASTM A269/SA213, Seamless, Plain ends, SS 316L, Hardness 80 HRB, Cold drawn, Outside matt finish Bright Annealed
- 12.7 - 0.083 - pcs 6
O-Ring 4mm O-Ring PTFE (Food grade) - 25.4 - 4 - pcs 46
38.1 - 4 - pcs 194mm O-Ring Silicon(Food grade) to comply with CFR 21.177.2600
- 9.5 - 4 - pcs 4
12.7 - 4 - pcs 919.05 - 4 - pcs 4125.4 - 4 - pcs 18638.1 - 4 - pcs 36550.8 - 4 - pcs 22263.5 - 4 - pcs 3876.2 - 4 - pcs 49101.6 - 4 - pcs 8
Silicone (Food Grade) - 12.7 - 4 - pcs 219.05 - 4 - pcs 625.4 - 4 - pcs 838.1 - 4 - pcs 24
Reducer, Con. (ERW)
ASTM A270 Suppliment 2, SS316L, ASME BPE 2009, Material as per Table DT-3, Dimension as per ASME BPE 2009, Table DT-11
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
38.1 X 25.4Square Ends 1.65 Table DT-2 pcs 1
19.05 X 12.7 Square Ends 1.65 Table DT-2 pcs 125.4 X 12.7 Square Ends 1.65 Table DT-2 pcs 1
25.4 X H Square Ends 1.65 Table DT-2 pcs 350.8 X 38.1 Square Ends 1.65 Table DT-2 pcs 263.5 X 50.8 Square Ends 1.65 Table DT-2 pcs 176.2 X 50.8 Square Ends 1.65 Table DT-2 pcs 1
Reducer, Ecc. (ERW)
SS 316L, Dimension as per ASME BPE 2009 Table 11
Surface finish : Internal mill Finish and External Matt Finish
38.1 X 19.05 Square Ends 1.65 - pcs 2
ASTM A270 Suppliment 2, SS316L, ASME BPE 2009, Material as per Table DT-3, Dimension as per ASME BPE 2009, Table DT-11
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
25.4 X 19.05 Square Ends 1.65 Table DT-2 pcs 1
38.1 X 19.05 Square Ends 1.65 Table DT-2 pcs 238.1 X 25.4 Square Ends 1.65 Table DT-2 pcs 1650.8 X 25.4 Square Ends 1.65 Table DT-2 pcs 1550.8 X 38.1 Square Ends 1.65 Table DT-2 pcs 663.5 X 50.8 Square Ends 1.65 Table DT-2 pcs 3
Reducer, Ecc. (SMLS)
ASTM A270 Suppliment 2, SS316L, ASME BPE 2009, Material as per Table DT-3, Dimension as per ASME BPE 2009, Table DT-11
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
19.05X 38.1 Square Ends 1.65 Table DT-2 pcs 4
12.7 X 9.5 Square Ends 1.65 Table DT-2 pcs 0SMS Union SS 316L Hyg (SS 316L Electro Polish), Int.
Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
12.7 - - Table DT-2 pcs 13
19.05 - - Table DT-2 pcs 125.4 - - Table DT-2 pcs 238.1 - - Table DT-2 pcs 1950.8 - - Table DT-2 pcs 4063.5 - - Table DT-2 pcs 1376.2 - - Table DT-2 pcs 2
Tee, Equal (ERW) SS304, Dimension as per ASME BPE 2009 Table DT9
- 25.4 Square Ends 1.65 - pcs 7
SS 316L, Dimension as per ASME BPE 2009 Table 9
Surface finish : Internal mill Finish and External Matt Finish
25.4 Square Ends 1.65 - pcs 1
ASTM A270 Suppliment 2, SS316L, ASME BPE 2009, Material as per Table DT-3, Dimension as per ASME BPE 2009, Table DT-9
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
12.7 Square Ends 1.65 Table DT-2 pcs 1
19.05 Square Ends 1.65 Table DT-2 pcs 025.4 Square Ends 1.65 Table DT-2 pcs 1538.1 Square Ends 1.65 Table DT-2 pcs 2550.8 Square Ends 1.65 Table DT-2 pcs 3963.5 Square Ends 1.65 Table DT-2 pcs 176.2 Square Ends 1.65 Table DT-2 pcs 10101.6 Square Ends 2.11 Table DT-2 pcs 3
ASTM A270 Suppliment - 2SS 316L , ASME BPE 2009, Material as per Table DT-3' Dimension as per ASME BPE 2009, Table DT-15
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
38.1 Ferrule End (Branch) X Square End (Header)
1.65 Table DT-2 pcs 2
3 / 7
Sri Takada Industries (Malaysia) Sdn. Bhd.Project : BIOCON - F22A/C/D – SPECIALITY GAS SYSTEMS, ALL CLEAN PIPING AND SS PIPING WORKSRe : Fittings
Sum of QTY.
TYPE MATERIAL & DIM. STD. NOTE SIZE (MM) ENDSTHICK (mm) / SCH.
Rating UNIT Total
Tee, Equal (SMLS) SS 316L, Double ferrule compression type with back ferrule (Compression fittings) Hardness 80 HRBSuitable for swaging
- 12.7 - 0.083 - pcs 6
ASTM A270 Suppliment 2, SS316L, ASME BPE 2009, Material as per Table DT-3, Dimension as per ASME BPE 2009, Table DT-9
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
19.05 Square Ends 1.65 Table DT-2 pcs 4
Tee, Red. (ERW) SS 316L, Dimension as per ASME BPE 2009 Table DT -10
Surface finish : Internal mill Finish and External Matt Finish
25.4 X 12.7 - 1.65 - pcs 1
Tee, Red. (SMLS) SS 316L, Double ferrule compression type with back ferrule (Compression fittings) Hardness 80 HRBSuitable for swaging
- 19.05 X 12.7 - 0.109 X 0.083
- pcs 10
Tee, Short (ERW) ASTM A270 Supplement S2 SS316L ASME BPE-2009, Material As Per Table DT3,& DT-14
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
25.4 Square Ends 1.65 Table DT-2 pcs 1
38.1 Square Ends 1.65 Table DT-2 pcs 1850.8 Square Ends 1.65 Table DT-2 pcs 20
SS 316L, Dimension as per ASME BPE 2009 Table DT14
Surface finish : Internal mill Finish and External Matt Finish
25.4 Square Ends 1.65 - pcs 2
38.1 Square Ends 1.65 - pcs 18Tee, Unequal (ERW) SS 304, Dimension as per ASME
BPE 2009 Table DT-10- 38.1 X 25.4 Square Ends 1.65 - pcs 2
50.8 X 25.4 Square Ends 1.65 - pcs 1050.8 X 38.1 Square Ends 1.65 - pcs 4
ASTM A270 Suppliment 2, SS316L, ASME BPE 2009, Material as per Table DT-3, Dimension as per ASME BPE 2009, Table DT-10
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
101.6 X 19.05 Square Ends 2.11 X 1.65
Table DT-2 pcs 2
101.6 X 50.8 Square Ends 2.11 X 1.65
Table DT-2 pcs 12
19.05 X 12.7 Square Ends 1.65 Table DT-2 pcs 119.05X 25.4 Square Ends 1.65 Table DT-2 pcs 419.05X 38.1 Square Ends 1.65 Table DT-2 pcs 1225.4 X 19.05 Square Ends 1.65 Table DT-2 pcs 338.1 X 12.7 Square Ends 1.65 Table DT-2 pcs 138.1 X 19.05 Square Ends 1.65 Table DT-2 pcs 438.1 X 25.4 Square Ends 1.65 Table DT-2 pcs 2350.8 X 19.05 Square Ends 1.65 Table DT-2 pcs 550.8 X 25.4 Square Ends 1.65 Table DT-2 pcs 3950.8 X 38.1 Square Ends 1.65 Table DT-2 pcs 263.5 X 38.1 Square Ends 1.65 Table DT-2 pcs 163.5 X 50.8 Square Ends 1.65 Table DT-2 pcs 576.2 X 25.4 Square Ends 1.65 Table DT-2 pcs 276.2 X 38.1 Square Ends 1.65 Table DT-2 pcs 276.2 X 50.8 Square Ends 1.65 Table DT-2 pcs 776.2 X 63.5 Square Ends 1.65 Table DT-2 pcs 1
Tee, Unequal (SMLS)
SS 316L, Seamless, Swagelok/Eq. Tubing Std.
- 19.05 X 12.7 NPT, Double ferrule compression type with back ferrule
- - pcs 15
Tube (ERW) ASTM A270 Suppliment - 2SS 316L , ASME BPE 2009, Material as per Table DT-3' Dimension as per ASME BPE 2009, Table DT-1
Surface finish : Internal mill Finish and External Matt Finish
12.7 Square Ends 1.65 - Meter 14
19.05 Square Ends 1.65 - Meter 1825.4 Square Ends 1.65 - Meter 1938.1 Square Ends 1.65 - Meter 22
ASTM A270, SS 316L, Dimension as per ASME BPE 2009 Table DT-1,ERW
Surface finish : Internal mill Finish and External Matt Finish
19.05 Square Ends 1.65 - Meter 12
25.4 Square Ends 1.65 - Meter 1438.1 Square Ends 1.65 - Meter 5650.8 Square Ends 1.65 - Meter 076.2 Square Ends 1.65 - Meter 0
ASTM A270, SS304, Dimension as per ASME BPE 2009 Table DT-1
- 25.4 - 1.65 - Meter 650
38.1 - 1.65 - Meter 12750.8 - 1.65 - Meter 129
4 / 7
Sri Takada Industries (Malaysia) Sdn. Bhd.Project : BIOCON - F22A/C/D – SPECIALITY GAS SYSTEMS, ALL CLEAN PIPING AND SS PIPING WORKSRe : Fittings
Sum of QTY.
TYPE MATERIAL & DIM. STD. NOTE SIZE (MM) ENDSTHICK (mm) / SCH.
Rating UNIT Total
ASTM A270 Suppliment 2, SS316L , ASME BPE 2009, Material as per Table DT-3, Dimension as per ASME BPE 2009, Table DT-1
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
9.5 Square Ends 1.65 Table DT-2 Meter 8
12.7 Square Ends 1.65 Table DT-2 Meter 3119.05 Square Ends 1.65 Table DT-2 Meter 24825.4 Square Ends 1.65 Table DT-2 Meter 95338.1 Square Ends 1.65 Table DT-2 Meter 1897.550.8 Square Ends 1.65 Table DT-2 Meter 78763.5 Square Ends 1.65 Table DT-2 Meter 30076.2 Square Ends 1.65 Table DT-2 Meter 497101.6 Square Ends 2.11 Table DT-2 Meter 28
Tube (SMLS) ASTM A269/SA213, Seamless, Plain ends, SS 316L, Hardness 80 HRB, Cold drawn, Outside matt finish Bright Annealed
- 12.7 PE 0.083 - Meter 306
19.05 PE 0.109 - Meter 41625.4 PE 0.12 - Meter 0
Tube Support Clamp SS 304 CLAMP AS PER MANUFACTURING STANDARD
- 12.7 - 0.083 - pcs 119
- - pcs 3319.05 - 0.109 - pcs 83
- - pcs 125SS304, Hygienic Quality, Adjustable Tube Clamp (Vendor to provide Details)
- 12.7 - - - pcs 13
19.05 - - - pcs 9825.4 - - - pcs 80038.1 - - - pcs 101850.8 - - - pcs 1063.5 - - - pcs 076.2 - - - pcs 199101.6 - - - pcs 12
Union SS 316L, Seamless, Swagelok/Eq. Tubing Std.
- 12.7 NPT, Double ferrule compression type with back ferrule
- - pcs 8
19.05 NPT, Double ferrule compression type with back ferrule
- - pcs 15
25.4 NPT, Double ferrule compression type with back ferrule
- - pcs 0
Union Elbow 90° SS 316L, Seamless, Swagelok/Eq. Tubing Std.
- 12.7 NPT, Double ferrule compression type with back ferrule
- - pcs 25
19.05 NPT, Double ferrule compression type with back ferrule
- - pcs 35
25.4 NPT, Double ferrule compression type with back ferrule
- - pcs 0
Triclover (Hygienic Tube Clamp)
SS 304, ASME BPE 2009, (Fig-DT-1 & DT-10.4), Two-piece high presure cast clamp, Matt Finish
- 12.7 - 1.65 Table DT-2 pcs 2
19.05 - 1.65 Table DT-2 pcs 625.4 - 1.65 Table DT-2 pcs 5638.1 - 1.65 Table DT-2 pcs 44
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
9.5 - 1.65 Table DT-2 pcs 4
12.7 - 1.65 Table DT-2 pcs 919.05 - 1.65 Table DT-2 pcs 4125.4 - 1.65 Table DT-2 pcs 18738.1 - 1.65 Table DT-2 pcs 36550.8 - 1.65 Table DT-2 pcs 22263.5 - 1.65 Table DT-2 pcs 3876.2 - 1.65 Table DT-2 pcs 49101.6 - 2.11 Table DT-2 pcs 8
5 / 7
Sri Takada Industries (Malaysia) Sdn. Bhd.Project : BIOCON - F22A/C/D – SPECIALITY GAS SYSTEMS, ALL CLEAN PIPING AND SS PIPING WORKSRe : Fittings
Sum of QTY.
TYPE MATERIAL & DIM. STD. NOTE SIZE (MM) ENDSTHICK (mm) / SCH.
Rating UNIT Total
Hygienic Clamp Joint, Solid End Cap
ASTM A270 Suppliment - 2SS 316L , ASME BPE 2009, Material as per Table DT-3' Dimension as per ASME BPE 2009, Table DT-31
Hyg (SS 316L Electro Polish), Int. Finish Ra< 0.38 micron & Ex. FinishMatt Finish (ASME-BPE 2009-Table-SF3), Surface Designation SF-4
12.7 - - Table DT-2 pcs 8
19.05 - - Table DT-2 pcs 8Gas Manifold
(Ref P&id Do.no BSDN-J-1002-P-2-01003)
MOC - SS 316L,Each manifold comprise of following items.1no-PRV (Ref Do.no BSDN-J-1002-I-5-91720)1no-Safty valve(Ref Do.no BSDN-J-1002-I-5-91721)2no-PI with Isolation valve Pressure guage High range(Ref Do.no BSDN-J-1002-I-5-91506)1no-PI with Isolation valve Pressure guage Low range(Ref Do.no BSDN-J-1002-I-5-91505)2no- Isolation Ball valve 19.05 OD size(Swagelok-60 Series)3no- Check valve 19.05 OD size vertical Type2no-Filter (5µ-10µ) vendor to verify. 2no-19.05 Hose PTFE Liner smooth Bore,S.S Braided working pressure 150 Bar.Associated tubing -1set.
- 19.05 Double ferrule Compression
Type with back Ferrule ends,
- - pcs 3
MOC - SS 316L,Each manifold comprise of following items.1no-PRV (Ref Do.no BSDN-J-1002-I-5-96711-01)1no-Safty valve(Ref Do.no BSDN-J-1002-I-5-96710-01)2no-PI with Isolation valve Pressure guage High range(Ref Do.no BSDN-J-1002-I-5-96712-01)1no-PI with Isolation valve Pressure guage Low range(Ref Do.no BSDN-J-1002-I-5-96709-01)2no- Isolation Ball valve 12.7 OD size(Swagelok-60 Series)3no- Check valve 12.7 OD size vertical Type2no-Filter (5µ-10µ) vendor to verify. 2no-12.7 Hose PTFE Liner smooth Bore,S.S Braided working pressure 150 Bar.Associated tubing -1set.
- 12.7 Double ferrule Compression Type with back Ferrule ends,
- - pcs 3
Split Plate SS304 circular split plates FOR TUBES with counter sunk 6M screwas per dwg no. BSDN-J-1002-W-2-00020-01
To Seal False Ceiling - - 6mm thk.
- pcs 30
Circular Split SS304 circular split plates FOR TUBES with counter sunk 6M screw(2 nos for each plate) as per dwg no. BSDN-J-1002-W-2-53026-01
To Seal False Ceiling 12.7 - 6mm thk.
- pcs 10
19.05 - 6mm thk.
- pcs 10
25.4 - 6mm thk.
- pcs 10
38.8 - 6mm thk.
- pcs 10
50.8 - 6mm thk.
- pcs 10
63.4 - 6mm thk.
- pcs 10
76.2 - 6mm thk.
- pcs 10
101.6 - 6mm thk.
- pcs 10
6 / 7
Sri Takada Industries (Malaysia) Sdn. Bhd.Project : BIOCON - F22A/C/D – SPECIALITY GAS SYSTEMS, ALL CLEAN PIPING AND SS PIPING WORKSRe : Fittings
Sum of QTY.
TYPE MATERIAL & DIM. STD. NOTE SIZE (MM) ENDSTHICK (mm) / SCH.
Rating UNIT Total
Gas Manifold
PD-M-01
PD-M-02
PD-M-03
PD-M-04
PD-M-05
(Ref P&id Do.no BSDN-J-1002-P-2-92005-05)
MOC - SS 316L,Each manifold comprise of following items.1no-PRV (Ref Do.no BSDN-J-1002-I-5-96711-01)1no-Safty valve(Ref Do.no BSDN-J-1002-I-5-96710-01)2no-PI with Isolation valve Pressure guage High range(Ref Do.no BSDN-J-1002-I-5-96712-01)1no-PI with Isolation valve Pressure guage Low range(Ref Do.no BSDN-J-1002-I-5-96709-01)2no- Isolation Ball valve 19.05 OD size(Swagelok-60 Series)3no- Check valve 19.05 OD size vertical Type2no-Filter (5µ-10µ) vendor to verify. 2no-19.05 Hose PTFE Liner smooth Bore,S.S Braided working pressure 150 Bar.Associated tubing -1set.
- 19.05 Double ferrule Compression
Type with back Ferrule ends,
- - pcs 5
7 / 7