Bourbon Atibaia Spa Resort - Atibaia, SP - Brazil April 23 ...esss.com.br/events/ansys2013/brazil/pdf/UGM2013_Brazil_final... · Structural Dynamics and Acoustics Analysis using ANSYS:

2013 ESSS CONFERENCE & ANSYS USERS MEETINGBourbon Atibaia Spa Resort - Atibaia, SP - BrazilApril 23-25, 2013

FINAL PROGRAM

ArgentinaBuenos Aires

April, 16-17

AndeanLima

April, 15-16

ChileSantiago

April 18-19

BrazilAtibaia

April 23-25

®

Organization:

Sponsors:

Academic Challenge Sponsor:

2013 ESSS CONFERENCE & ANSYS USERS MEETING

wELCOME

REGISTRATION

The ESSS CONFERENCE & ANSYS USERS MEETING is the most traditional discussion forum for users of simulation software applied to product development in South America.

During the course of three days, engineers, designers and researchers will have the opportunity to exchange ideas and experiences in Computer Aided Engineering (CAE) and to improve their engineering simulation skills through training courses, software update, plenary sessions, free workshops, user technical presentations, mini-symposia, and ask the expert sessions.

Join us and find out how innovative companies, universities and R&D centers have been applying engineering simulation software to improve processes and reduce their product development cycle time.

Bourbon Atibaia Spa Resort - Atibaia, SP - BrazilApril 23-25, 2013

THE EVENT

• Pre-Conference Training Courses

• Plenary Keynote Speakers

• Software Update

• Free Workshops

• 80+ User Technical Presentations

• Ask the Expert

• Mini-Symposia

• Academic Challenge

www.esss.com.br/usersmeeting

http://www.esss.com.br/events/ansys2013/brazil/inscricao

8:00 REGISTRATION OPEN

8:30 TRAINING COURSES

10:00 REFRESHMENTS IN EXHIBITION AREA


12:00 LUNCH




17:30 ENd OF 1st dAY

uu April 23

CONFERENCE AT-A-GLANCE

uu April 24 uu April 25



8:30 FREE wORKSHOPS

9:30 SOFTwARE UPdATE


11:00 OPENING SESSION

11:10 PLENARY SESSION

12:50 LUNCH

14:30 TECHNICAL SESSIONS MINI-SYMPOSIA



17:20 ASK THE EXPERT

17:50 CONFERENCE SOCIAL (COCKTAIL)


8:30 FREE wORKSHOPS

9:30 SOFTwARE UPdATE


11:00 PLENARY SESSION

12:30 ESSS ACAdEMIC CHALLENGE AwARd

12:50 LUNCH




17:20 ASK THE EXPERT

17:50 CLOSING SESSION (EACH ROOM)


SOUTH AMERICA REGIONAL SERIES IN NUMBERS

AndeanLima

April 15-16

ArgentinaBuenos Aires

April 16-17

ChileSantiago

April 18-19

BrazilSão Paulo

April 23-25

TEChniCAl PAPERS 20 20 30 80

CoMPAniES ATTEndAnCE 20 25 25 60

UnivERSiTiES / R&d CEnTERS ATTEndAnCE 10 15 10 30

ExPECTEd nUMBER oF ATTEndEES 70 130 100 270

The South America Regional Series will be held in Brazil, Argentina, Chile and Peru. At the end of this conference series, more than 150 companies, universities, and R&D Centers will present a total of 150 user technical papers to approximately 600 attendees in South America.

www.esss.com.br/usersmeeting

Vibroacoustics - Fundamentals and Simulation

Contents: 1. Vibroacoustics Fundamentals:

• Introduction to Vibration;• System of 1 DOF;• Vibrations Control;• Vibration Measurement;• Modal Analysis;• What’s Noise;• Sound Wave Generation and Propagation;• Sound Quantity Units;• dB and dBA Scales;• Noise Effects over the Human Body;• Noise Control;• Noise Measurement.

2. Structural Dynamics and Acoustics Analysis using ANSYS: • Introduction to ANSYS;• Modal Numerical Analysis;• Harmonic Analysis;• Acoustic Boundary Conditions;• Beam Modal and Harmonic Analyses and its Experimental

Validation;• Modal and Harmonic Analyses of a Plate;• Introduction to ANSYS Acoustics Capabilities;• Boundary Conditions;• Modal and Harmonic Analyses of Acoustic Cavity;• Numerical Analysis and Experimental Validation of a Acoustic

Muffler;• Result Analysis and Conclusions.

Instructor: Edmar Baars - VibroacústicaSchedule: April 23Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).


Advanced Technologies with ANSYS Mechanical 14.5

Contents: • Object Generator; • Multizone Meshing; • Sub Modeling; • Explicit to Implicit;• Reactions on Surface;• Result Trackers.

Instructor: Tim Pawlak - ANSYS, Inc.Schedule: April 23Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).

Fatigue Analysis Techniques using nCOdE designLife

Contents: • Introduction to Fatigue and nCODE DesignLife;• DesignLife Fundamentals;• Advanced Edit;• Bill of Material;• Multiple Fatigue Analysis Runs;• Batch Jobs;• Virtual Strain Gage;• Spot Weld Fatigue;• Seam Weld Fatigue;• Modal Superposition;• Vibration Fatigue;• Dang Van Multiaxial Fatigue;• Adhesive Bonds;• Short Fiber Composite Materials.

Instructor: Erik Ostergard - HBM nCodeSchedule: April 23Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).

TRAINING COURSES

Best Practices for CFd Turbulence Modeling using ANSYS Fluid dynamics

Contents: 1. Turbulence Modeling Overview:

• Characteristics of Turbulent Flows;• Simulation Approaches;• Theory.

2. Reynolds Averaged Navier-Stokes (RANS) models in ANSYS CFD: • Spalart-Allmaras Model;• k-e Family of Models; • k-w Family of Models; • Reynolds Stress Models.

3. Near Wall Turbulence Modeling: • Law of the Wall; • Wall Functions; • Enhanced Wall Treatment; • Implications for Meshing.

4. Transition Modeling: • Transition Models.

5. Hybrid Modeling Approaches: • Hybrid RANS-LES Methods: Motivation; • Detached Eddy Simulation (DES);• Scale Adaptive Simulation (SAS).

6. Large Eddy Simulation (LES): • Motivation; • Theoretical background;• Zonal Methods: Embedded LES (ELES);• Wall Modeled LES (WMLES).

Instructor: Christian Lübon - ANSYS Germany GmbHSchedule: April 23Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).

TRAINING COURSES


Signal and Power Integrity of Electronic Systems

Contents: • Introduction to Signal and Power Integrity;• HFSS Overview;• Simulation Basics;• HFSS for ECAD;• Designer/Nexxim Overview;• QuickEye and VerifEye.

Instructor: Markus Kopp - ANSYS, Inc.Schedule: April 23Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).

doE & Sensitivity Analysis

Contents: 1. Deterministic vs Statistical Sensitivity:

• The goal of sensitivity analysis;• Derivatives as local sensitivity;• Statistic approach for sensitivity.

2. Design of Experiments for Numerical Simulation: • Why DoE;• Basic DoE techniques;• Full Factorial Techniques;• Advanced DoE.

3. Robustness & Reliability: • Monte Carlo;• Latin Hypercube;• Taguchi.

4. Variance Decomposition: • Covariance;• Correlation;• ANOVA;• Linear Regression.

5. Data & Sensitivity Analyses: • Numerical Simulation Example - FEA;• Numerical Simulation Example - CFD.

Instructor: Guilherme Jenovencio - ESSSSchedule: April 23Lenght: 8 hoursFee: R$ 1.150,00 (20% off for academic students).


Room piRacicaba itú soRocaba campinas itupeva valinhos

8:30 - 9:00

FLUENT with TGrid Meshing and Mesh Morpher

• TGrid Mesh Generation inside Fluent;

• Mesh Morpher Applications.

instructor: leon White

Reactive Flow and Combustion Simulation

• Finite-rate Volumetric Reaction Models General Concepts;

• Non-premixed Combustion Models;• Premixed and Partially Premixed

Combustion Models;• Best Practices.

instructor: Ana Paula Faria

Advanced Composite Modeling with ACP

• ACP Overview;• Typical Modeling with ACP;• Cylindrical Tank Study.

instructor: Eduardo Araújo

14.5 Enhancements for Contact Modeling

• Trim Contact;• Shell Thickness Effect;• Connection Matrix;• Best Practices and Tips.

instructor: Roberto Silva

Post-processing for Rotary Electrical Machinery

• Maxwell User Defined Outputs (UDO);

• Average & RMS Solutions of Electric Machines;

• Transient d-q Solutions of Electric Machines.

instructor: Diogo Figueiredo

HFSS for ECAd

• HFSS Solver on Demand;• DDR3 Virtual Compliance;• Signal Integrity Analysis;• Launching HFSS from SIwave.

instructor: Juliano Mologni

9:00 - 9:30

Turbomachinery

• New Transient Formulation for Turbomachinery Applications.

instructor: Bruno Contessi

Multiphase Flow

• Discrete Phase Model (DPM) x Eulerian Model;

• Eulerian Models: VOF, Mixture Model, Eulerian-Eulerian;

• Phase interaction: Momentum Transfer;

• Best Practices.

instructor: Rodrigo Peralta

Explicit dynamics for drop Test Analysis

• Meshing Best Practices;• General Setup Recommendations;• Drop Test Analysis Example;• Results Verification.

instructor: Ivan Thesi

workbench 14.5 Ease of Use Tricks

• Object Generator;• Tags;• New Post-processing Features.

instructor: Pedro Cheroto

FEA-EdA Multiphysics Coupling using ANSYS workbench

• Maxwell - Workbench Mechanical 1-Way Coupling;

• Toyota Prius IPM Motor Vibrational Study (2004).

instructor: Diogo Figueiredo

Finite Antenna Array design using HFSS ddM

• Antenna Array Mask;• Composite Excitation;• Domain Decomposition.


uu April 24

Room piRacicaba itú soRocaba campinas

8:30 - 9:30

CAd/CAE Integration by SpaceClaim

instructor: Roman Walsh

design Optimization

instructor: Guilherme Jenovencio

ANSYS Customization Tool Kit & ANSYS EKM

• ACT Overview;• ACT by Example: Beam Results / Submodeling;• ACT: A Deeper Look;• EKM Overview.

instructors: Luiz Lima / Vinicius Strugata

Multiphysics Analysis of Real Industry Problems


uu April 25

FREE wORKSHOPS


SOFTwARE UPdATE

Room piRacicaba itú soRocaba

9:30 - 10:30

ANSYS Fluid Update

Christian Lübon ansYs Germany Gmbh

ANSYS Electromagnetics Update

Markus Kopp ansYs, inc.

ANSYS Structural Update

Tim Pawlak ansYs, inc.

uu April 24

Room piRacicaba itú soRocaba

9:30 - 10:30

modeFRONTIER Update

Nader Fateh esteco

nCOdE Update

Erik Ostergard hbm ncode

ANSYS workbench Update

Sanjay Angadi ansYs, inc.

uu April 25

PLENARY SESSION

Room londRina

11:00OPENING SESSIONClovis Maliska Jr. - ESSSPresident

11:10

Barry Christenson - ANSYS, Inc. Director of Product Management

“ANSYS Corporate and Product Road Map”

11:40

José Luiz Albertin - ABNT CB05Chief of Secretariat

“Globalization and Competitiveness. Standards Allow Go Faster”

12:10

Flávia Pacheco Teixeira da Silva - Petrobras/CenpesReservoir simulation and evaluation

“Technology Challenges at Petrobras: Vision for Geoengineering and Well Engineering”

Room londRina

11:00

Rogério Amaury de Medeiros - FINEP - MCTIchief of department of monitoring, evaluation and information management

“Innovation in Brazil - Inova Empresa Program”

11:30

Paulo de Mattos Pimenta - USPdepartment of structural and Geotechnical engineering

“Fluid Dynamic and Structural Finite Element Analysis of the Brasília National Stadium”

12:00

Eduardo Alves Cardoso - Electrolux do Brasil S.AFood Preservation and Air Care R&D Laboratory Manager Global Leader of Networking Simulation Module - CFD

“Simulation Technology by Electrolux”

uu April 24 uu April 25



Room piRacicaba itú soRocaba campinas itupeva valinhossession

chairmanAutomotive Fabiano Diesel

Appliances José Anchieta

Metals & Mining Nicolas Spogis

Power Generation Armando de Souza

Marine & offshore Roberto Silva

Chemical Process Andressa Ribeiro

14:30 Modeling Strategies for Explicit Simulation of Balistic impactsLuiz Lima - ime / esss

Acoustic and Fluid dynamic Performance of industrial MufflersCelso Kenzo - vibroacústica - eletrodb

Computational Analysis of the Cooling of Rolls Used in the Transport of Slabs From Continuous CastingLeonardo Camilo dos Reis - usiminas

Fluid Mechanic Relationship in a Francis Runner TurbineMichelle Abreu - andritz

Structural Study of an ocean Racing Trimaran Using Finite Element MethodThiago Pontin Tancredi - usp

Turbulent Free Surface and dispersed Phase Flow in Stirred Tank: voF and ASM ApproachDaniel da Cunha Ribeiro - uFes

14:50 non-linear Structural Analysis of Automotive Component Assembled by Pin FixtureWiliam Tean Su - thyssenKrupp

vibroacoustic Analysis of the Ressonance Box of a viola CaipiraJosé M. Campos Dos Santos - unicamp

Fatigue Analysis of CvC-Type Rolling Mill RollsYukio Shigaki - ceFet-mG

Evaluation of Actuating discs in horizontal Axe Wind Turbines with CFdJosé Leandro Rosales Luz - ste

Modeling of the Wind Flow Action over offshore Structures with Application on a FPSo helideckWilques W. Ferreira Pinheiro - solitons

Energy and Momentum Transfer Analysis of a distillation Column Sieve Tray for an Ethanol-Water System Using CFd TechniquesGabriel Henrique Justi - uFscar

15:10 Brake Squeal AnalysisFabiano Diesel - Fras-le / esss

Study of the dynamic Behavior of the vRU CompressorDanuza Santana Dias - sKF

ore Blocks Restraint Structures in Crushing PlantsJose Cléber Rodriges da Silva - vale

Structural Control of a Wind Turbine Using a Tuned Mass damper via Finite Element MethodSuzana Moreira Avila - unb

Finite Element Analysis Parameterization - Structural Analysis of ReelsThiago Pontual - technip

Simulation of a Water Spray System in Process vesselFabio Nader Azar - safetyeng

15:30 REFRESHMENTS IN EXHIBITION AREAsession

chairmanAutomotive & Aerospace Fabio Yukio

Appliances Ivan Thesi

Civil & health Eduardo Araújo

Power Generation Luiz Lima

Marine & offshore Raphael David

oil & Gas - CFd João Aguirre

16:00 on the deployment of a Gliding BombMateus Gomes Filgueiras - magnaghi Friuli aeroespace

Active Control of a Beam Structure Using Piezo-electric Actuators in AnSYSAureliano R. Barborati Ribeiro - uniFei

numerical and Experimental verification of the Point of Enchasing of orthopedic Pins depending on the Method of AttachmentAlfonso Pappalardo Junior - mackenzie

Underhood Thermal Management Using CFdArmando de Souza - agrale / esss

numerical Simulation of Self-propelling Essay of a displacement hullAlexandre Teixeira de Pinho Alho - uFRJ

CFd Analysis of Transient Temperature Profile in Coke drums with different Feed nozzles ArrangementsMariana Nogueira Dantas - esss

16:20 CFd Applied to the Simulation of a Cylinder-piston AssemblyDarlan Costa Porto - uGF

Thermal Shock Stress Analysis of Flexible Printed Boards considering the Solders Joints of Electronic Components using AnSYSLuciano Arruda - inst. nokia de tecnologia

Fatigue Analysis of a Simple Shaft under Combined Bending and TorsionEduardo Araujo - esss

numerical Analysis of the Effects of Cross-Section variation of Microchannels in Single-phase laminar FlowFabiano da Rosa Hollweg - unisinos

CFd Simulations for Environmental loads on a Supply BoatDaniel Fonseca de C. e Silva - petrobras

Prediction of hydrodynamics and Efficiency of a distillation Sieve Tray by CFd SimulationGladson Cintra de Oliveira - uFscar

16:40 Tosca - virtual CAELeandro Garbin

SGiAndré Gardinalli

MaterialiseDaniel Almeida

next EngineMarcos Langeani

nvidiaMarcio Aguiar

17:00 Frequency Response Functions of an Automotive Chassis (Body in White)Celso Kenzo - vibroacústica - Fiat

Workbench, APdl and one Unusual Finite Element ApplicationMarcos G. Dropa de Bortoli - embRaco

Finite Element Analysis of dynamic Behavior of Stadium StandsCarlos Alberto Medeiros - vale

Comparative Study of Calculation Methods of hydraulic Turbine’s Wicket GatesEduardo Koichi Iha - andritz

Buckling in a Semi-Submersible: A Parametric Analysis and Mass optimizationThiago Pontin Tancredi - usp

The Rule of Comprehensive Modeling for Kraft Chemical Recovery BoilerDaniel José de Oliveira Ferreira - usp

17:20 Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert

USER TECHNICAL SESSIONS

uu April 24


USER TECHNICAL SESSIONS

Room piRacicaba itú soRocaba campinas itupevasession

chairmanAppliances Martin Kessler

oil & Gas - FEA Roberto Silva

oil & Gas - CFd Andressa Ribeiro

Electronics Juliano Mologni

Materials Michele Mendes

14:30 Multidisciplinary optimization of Axial ventilation holes for Medium voltage induction MotorsRafael S. Barbetta - WeG equip. elétricos s.a.

“in-Situ” Repair of Tubular Casings of offshore Structures PumpsGilson Gomes da Silva - petrobras

CFd Simulation of a Circulating Fluidized Bed Gasifier With heat TransmissionMarcelo Ricardo Q. Medeiros - petrobras

high Frequency digital Connections using hFSS Software PlatformVanessa Przybylski Ribeiro Magri - puc-RJ

Study of the interface Effects on Glued laminated Beams Subjected to lateral-Torsional BucklingAlfonso Pappalardo Junior - mackenzie

14:50 CFd validation with ASME v&v 20 - Total Frost Free RefrigeratorHugo Flávio Benassi Zanqueta - electrolux

Analysis of a Polymeric insert With Metallic Core For Bend Stiffener AdaptorsAnderson Cunha dos Santos - Ge

Modeling Salt Wall dissolution due to Flow in the Well-drilling Column Annular Channel using AnSYS FluentJoão Aguirre - esss

Transient Analysis of a dual Polarization log-periodic Antenna for Remote Sensing ApplicationsIgor Feliciano da Costa - inatel

design of Multilayer Radar Absorbing Materials (RAM) by Evolutionary optimizationRafael Jorge Port - cta/iae

15:10 The Effect of Thermodynamic Properties on Reciprocating Compressors Effective AreasDiogo Lôndero da Silva - embraco

Modal Analysis of a Suction vessel of a Reciprocating CompressorsLuis Guilherme T. Silveira Leite - petrobras

Use of Adaptive Mesh Simulation for Gaseous Effluent dispersionMarcelo Rocha Martinelli - petrobras

Electromagnetic Simulation of open TEM Cell for Compatibility TestingGustavo Maciulis Dip - esss

integrating Materials data Management with CAE using AnSYS Workbench as an ExampleGustavo Olivella - Granta design


chairmanAppliances Armando de Souza

oil & Gas - FEA Luiz Lima

oil & Gas - CFd João Aguirre

Electronics Juliano Mologni

Marine & offshore Eduardo Araujo

16:00 Methodology of Gas injection Analysis in a Metallurgical deviceLeonardo Cruz Arantes Campos - magnesita

Submodeling in AnSYS Workbench 14.5Roberto Silva - esss

Flow Field Analysis to improve a liquid/liquid Separator vessel design using CFdRodrigo Peralta - petrobras

Use of Ansoft Maxwell for investigation of Electrostatic Properties of a hemisphere on a Post Geometry Aimed to Model vacuum Field Emission devicesDavi Sabbag Roveri - unicamp

Analysis and design of a Flange Cover Using Fluid Structure interactionCarlos Eduardo Reuther de Siqueira - petrobras

16:20 modeFRonTiER as a design Tool for Compressors Suction SystemsTalita Wajczyk - embraco

Building Finite Element Meshes for Elliptical Cracks in nozzles’ WeldsLeandro Schiara - uFmG

CFd Simulation of a Circulating Fluidized Bed Gasifier Cold Physical ModelMarco Antonio Haikal Leite - petrobras

Rotor-Stator Electromagnetic Radial Force and Shaft deformation for a hermetic CompressorFlavio Kalluf - embraco

A Parametric Model of Evaluate the Stress in Mooring linesThiago Pontin Tancredi - usp

16:40 Granta designGustavo Olivella

PlanusJoão Carlos Lopes

Creative SolutionsGuilherme Tondello

RFid Tags Power Reduction Without Area PenaltiesFernando Herrmann - smdh

Study of Composite Pressure vessel using Workbench and APdl Eduardo Araujo - esss

17:00 Using dx to optimize the CFd Parameters Calibration ProcessCassiano A. Cezario - WeG equip. elétricos s.a.

Efficiency Evaluation of Stress Relief holes for Cracks in offshore Structures’ hullsGilson Gomes da Silva - petrobras

numerical Simulation of a Rotary dryer Using Granular Multiphase Model and Moving MeshRaphael Bacchi - esss

EMC Simulation for Washing MachinesGerson Eguni - Whirlpool

Structural Analysis of Pressure vessel Fully Wrapped of Composites to Storage nGvFernando F. M. C. de Guamá - Fmc technologies

17:20 Ask The Expert Ask The Expert Ask The Expert Ask The Expert Ask The Expert

uu April 25


MINI-SYMPOSIA

Room oFFice 1session

chairmanEsterel Technologies Tony Karam / Bernard Dion

14:30 Systems and Embedded Software Engineering with SCAdE

• Esterel introduction and operations in latin America

• Systems and Embedded Software with SCAdE Technical Presentation


chairmanEsterel Technologies Tony Karam / Bernard Dion

16:00 - 17:50

Systems and Embedded Software Engineering with SCAdE

• SCAdE Technical demo

• xMoBoT User Presentation (UAv Ground Control Station) with SCAdE

uu April 24

uu April 25

Room oFFice 1 oFFice 2session

chairmanMining Nicolas Spogis

Multidisciplinary optimization Rodrigo Ferraz

14:30 • The Key Rollplay of Simulation on Mining Processes & Equipment design Hellinton Andrade - business director - Blue Ocean

• ESSS/Rocky (dEM) Advanced Applications - CFd Coupling and FEA Coupling Alex Potapov - Conveyor Dynamics Inc.

• optimization of Complex Systems: Challenges on Aeronautical industry Alexandre Antunes - mdo team coordinator - Embraer


chairmanMining Nicolas Spogis

Multidisciplinary optimization Rodrigo Ferraz

16:00 - 17:50

• CAE Applied for Mining industry - dEMo & Examples Nicolas Spogis - business manager - ESSS

• Engineering Applications of Multidiscplinary optimization Nader Fateh - vp business development - Esteco

• Multidisciplinary Systems design optimization (M.S.d.o.): The next Frontier in the Technical Management of Complex Projects Sérgio Butkewitsch Choze - director - WebSolvers

2013

2º DESAFIO ESSS DE MODELAGEM COMPUTACIONAL


ESSS and Electrolux are pleased to invite all conference participants to visit the poster session at the foyer (Piso E) on April 24 and 25, 2013. The challenge was created with the objective of promoting the exchange of ideas and experiences between academia and industry.

In this 2nd edition, ESSS will count with the important contribution of Electrolux do Brasil S.A., a multinational company which is global leader in household and professional use appliances and equipments.

The competition consists of proposing an engineering problem solution through the use of computational simulation software provided by ESSS.

uu CHALLENGE wINNERS ANNOUNCEMENT

Winners will be announced at the end of the Plenary Session on Thursday, April 25, 2013.

ESSS COMPUTATIONAL MOdELING CHALLENGE: 2nd EdITION

uu SPONSOR

VENUE

Special daily rate for 2013 ESSS Conference & ANSYS Users Meeting.

Single Room: R$ 470,00 Double Room: R$ 580,00

SPECIAL RATES

BOOKING

A limited number of rooms at reduced rates is being held for attendees. Please contact Valencia Agência de Viagens e Turismo Ltda. for more details.

E-mail: [email protected] Phone: (11) 3111-2454 / (11) 9621-6875

BOURBON ATIBAIA SPA RESORT


INFORMATION ANd REGISTRATION

www.esss.com.br/usersmeetingE-mail: [email protected] São Paulo: +55 (11) 3046-5744 | Rio de Janeiro: +55 (21) 3293 1300 | Florianópolis: +55 (48) 3953 0000

Rod. Fernão Dias, s/n Km 37,5 - Atibaia - SP - BrazilGrande São Paulo: +55 (11) 4414 4700 Other Locations: 0800 703 40 41 www.bourbon.com.br

SHUTTLE SERVICE

From Airports to the Hotel*:

April 22 - under consultingApril 23 - 7:00, 7:20 and 7:40hApril 24 - 7:00, 7:20 and 7:40hApril 25 - 7:00, 7:20 and 7:40h

From Hotel to Airports*:

April 23 - 18:00April 24 -18:00 and 20:00hApril 25 - 18:30h

*Price per Shuttle and Person: R$ 50,00

INFORMATION ANd BOOKING

http://www.esss.com.br/events/ansys2013/brazil/local

Documents

Bourbon Atibaia Spa Resort - Atibaia, SP - Brazil April 23 ...esss.com.br/events/ansys2013/brazil/pdf/UGM2013_Brazil_final... · Structural Dynamics and Acoustics Analysis using ANSYS: