Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Bottle RefillPortable Bottle Refill Station
Model Number: MP-P-02
20190829_MP_PBP_V06
*Press button model shown
“No touch” nozzle design prevents bottle rim from coming in contact with the nozzle.
Water window that is accessible from both sides. Unique bottle rest to allow single handed operation.
Digital flow meter for recording valuable usage data, useful for marketing and servicing.
Base bollard can be filled with water, bolted or pegged down
for additional stability.
Interconnecting portable units make a wall of water stations
Durable wheelie bag is lightweight and targeted towards single person set up
Components and accessories are supplied and stored in the custom designed bag
Graphics & branding with endless opportunities.
Interchangeable branding.
Splash reducing mesh drain cover
Bottle RefillPortable Bottle Refill Station
Button options
Easy press stainless steel
Touch free sensor activation
23301
1300mm
100mm
445mm
470mm
500mm
Model: MP-P-02Dimensions: 1300H x 470W x 500D
Beautiful, durable and modern. The lightweight portable water station is thoughtfully designed for
ease of use and simple single person set up.
All information and images contained in the document are © Meet PAT™ - Products and Things Pty Ltd or their respective owners. They are not be used without consent from Meet PAT™. As improvements in the design and performance of Meet PAT products are continuous, specifications may be subject to change without notice. This technical sheet is copyright and owned by Meet PAT™ - Products and Things Pty Ltd ABN 42163544278. All rights are reserved. All products and sales are subject to Meet PAT™ terms and conditions.
Meet PatTM | Products and Things Pty Ltd | meetpat.com.auPhone: (02) 6021 0300, +612 6021 0300 Email: [email protected]
Technical InformationTapware/Push Buttons 1x Easy press stainless steel (316) button | Located on side
Tapware/Sensor 1x Infrared sensor. UV stable impact resistant lense. 4x AA batteries | Located on side
Chassis Powdercoated aluminium
Base Rotational moulded HDPE
Nozzle 316 stainless steel
Bag Wheelie bag houses unit and all components
Water Pressure Max. 500kpa operating pressure
Flow Rate 4L per minute (pressure dependent)
Filter 5 micron carbon filter installed as standard - 6000lt life before replacement
Flow Meter Digital. Located inside the unit (2x AA batteries supplied)
Minimum Working Temp 1˚C - lagging can be included for high/low temperature installations
Water Supply Connection 1/2 or 3/4” (Can be connected to a portable water supply or tank)
Water Hosing 12mm x 10m
Drainage Hosing 12mm x 4m
Weight 23kgs
Packed size 136cm length x 50cm wide x 23cm high
Warranty 1 Year (refer to Meet PAT warranty documentation for details)
Key Features• Versatile indoor/outdoor applications• Stand alone unit or interconnect multiple units• Durable bag for unit and accessories • Unique back printed polycarbonate graphic panels• Drainage system eliminates standing water• Bottle rest / single handed use• Dulux industrial coatings (10 year outdoor)• Heavy duty chassis and internal frame• Easy to clean and service• Accessibility - Designed with DDA
features (refer guidelines)
FRONT VIEW SIDE VIEW
TOP VIEW
Child friendly design / Soft touch or Touch free activation & lower side taps
Watermarked WMTS105:2016 to Australian Standards
Bottle RefillPortable Bottle Refill Station