BORUM MASTER 5500The Borum® Master 5500 series provides you with a variety of high capacity line marking machines designed for large scale jobs such as marking highways, motorways or airport runways.

The material tank capacity can be up to 780L (206 gal.) for thermoplastic, 2x440 L (2 x 116 gal.) or 1000 L (264 gal.) for cold paint and 2-component material. The possibility for the large material capacity naturally gives fewer stops during the day for refilling.

Equipped with a new Deutz diesel engine, the BM 5500 meets the EU Stage IV final (Stage V ready) and US Tier 4 emissions standards. The engine room is also designed to offer you easy access and servicing of the machine through large doors to the engine room.

BM 5500 is also an excellent choice for road marking jobs in hilly areas. The double speed wheel motors allow a max driving angle of 30%.

The BM 5500 has a two-seat slidable drive and operator section for flexible working on left or right side.

Borum A/S | Højvangsvej 10, Hadbjerg | DK-8370 Hadsten | Tel. +45 87 613 213 Fax +45 87 613 214 | info@borum.as | www.borum.as

ENGINE

ManufacturerTypeCoolingNumber of Cylinders

Rated power Approval

Deutz TCD 3.6 L4 4 stroke, common rail diesel with turbo and intercooler Water4 cylinder, 3600cm3 - 220cu.in.

76kW - 103HP @ 2300rpm / 390Nm - 228Ib.ft.@ 1700rpm EU Stage IV final ( Stage V ready) – US Tier 4.DOC+SCRF (AdBlue, DEF, ARLA32))COMPRESSOR

Capacity Hydraulic driven, air screw 2000 to 4500Lmin @ 1O bar 70 to 160cfm @ 1O bar Integrated oil system with external oil cooler. Water separator.

FILLING CAPACITIES

Fuel tankHydraulic fluid tankGlass bead container

160L (2x80L) - 42gal (2x21 gal.)128L-33gal 330L (2x165L) - 86gal (2x43gal.). Max 3bar - 43psi

MATERIAL TANK

Capacity

DRIVING PROPERTIES

Max gradient angle 30% (16º) at low speedTurning radius 4,90 mSteering Dual torque steering

TRANSMISSION

Hydrostatic transmission For variable speedSpeed range Electrically operated low speed shift, 0-12 or 0-24 km/h

ELECTRICAL SYSTEM

12 V/ 150 Amp

LINEMASTER COMPUTER - CONTROL UNIT

Program up to 99 different line typesOrganise lines in up to 30 marking programs8" displayTransfer of daily marking reportsData about road marking jobs can be accessed online (optional)

DIMENSIONSLengthWidthHightWeight

5350 mm (210 5/8”)1300 mm (51 1/4”) without equipment 2250 mm (88 5/8 ”)7500 kg (16534 lbs) maximum total weight

COLOUR

RAL 1007 (Other colours available on request)

SPECIFICATIONS

450L (119 gal.), 630L (166 gal.) or 780L (206 gal.) for thermoplastic pressurised tanks 445L (118 gal.). 585L (155 gal.) or 710L (188 gal.) for thermoplastic non-pressurised tanks 2x440L (116 gal.) or 1000L (264 gal.) pressurised tank for cold paint and 2 component

(0-15 or 0-7.5 mph)

Borum A/S | Højvangsvej 10, Hadbjerg | DK-8370 Hadsten | Tel. +45 87 613 213 Fax +45 87 613 214 | info@borum.as | www.borum.as