Embed Size (px)
Citation preview
SHALOM SECURITY PRODUCTS BOOM BARRIER
MODEL: SE ETBR
ISO 9001: 2008 CE CERTIFIED
Boom Barrier Specifications
SHALOM® range of barriers are built from heavy gauge steel and the folded
and welded case is extremely sturdy. The high torque electro-mechanical motor
and gearbox are spring loaded and damped, decreasing mechanical stress and
providing long term durability and Problem free service.
The high torque electro-mechanical motor and gearbox are spring assisted and
damped, reducing mechanical stress and providing long term reliability and
trouble free service
Uses a lever system that locks the barrier boom at both end positions. Ensures
that in the event of a power failure, the barrier boom can still be moved easily
by hand. A built in spring mechanism provides a precise counter balance for the
boom barrier, the springs are Set to correspond with the boom length prior to
installation, however if necessary, these can be easily reset during installation to
allow for site specification. The barrier is driven by a torque motor
Use of a torque motor has numerous benefits:
It is maintenance free and can be installed in any position without the risk of
damage. Power consumption is at minimum, Power is dissipated in the form of
heat, which prevents condensation and corrosion, therefore guaranteeing
problem free operation especially during cold climatic conditions.
Boom: Built from highly stable Aluminium alloy to produce rectangular profile
of 100 X 55 X 1.6mm or 80 X 38 X 1.6mm.
If the boom length is more than 3mts end support is require
Opening times: Models available from 2.5mts to 8mts
Boom Length
2.5mts :
3mts :
4mts :
5mts :
6mts :
7mts :
8mts :
opening time in seconds
2 sec
2.5 sec
4 sec
7 sec
7-9 sec
9-11 sec
12-16 sec
Speed can be reduce to 0.8 sec for specific application & specific lengths.
Can be integrated with Proximity Reader, Smart Reader; biometrics,
Barcode systems.Can be integrated directly with COMPORT in PC.
Easy to install using Template embedding on 2X2X2ft c23oncrete bed
Technical Specifications
Power Supply : 230V +/-10%, 50 / 60 Hz single phase
Motor revolutions : 1400 rpm
Absorbed power : 250W
Capacitor : 15uF
Max Absorbed Current : 1 Amp
Thermal Protection : 110˚ C
Manual manoeuvre : Personalized release key – knob
No. Manoeuvres in 24 h : Continuous service
Environmental conditions : -10˚ C to + 50˚ C
Shalom Enterprises, Plot No – 412, Mallareddy Nagar, Gajularamaram, Qutubullapur
Mandal, Hyderabad – 500 055, Ph : 040 – 3100 7374 / 3100 7394, email :
[email protected], [email protected],
Web : www.shalomsystems.net
Mumbai Branch:
Mr. Mark Vyas
Cont: 09869083170 E mail: [email protected],
Web : www.shalomsystems.net
