BONINI

La Bonini S.r.l., forte di un'esperienza ultraquarantennale, produce componenti ed accessori per sistemi infusionali.

L'azienda, stampando nei propri laboratori i particolari in materie plastiche, progetta e costruisce gli stampi in una moderna e attrezzata officina.

Tutti i processi di assemblaggio sono effettuati in apposite camere condizionate con processo totalmente automatico e controllato da computer.

chi siamo who we are

The company Bonini S.r.l., with more than forty years experience in this specific field, produces components and accessories for infusion sets.

The company moulds the plastic parts in its own laboratories; the moulds are designed and produced in the in-house, modern and well equipped workshop.

All the assembly proceedings are carried out in the suitable clean rooms, by means of a completely automatic and computer-controlled process.

Bonini S.r.l.Via dello Stallone 1/A23014 Delebio (SO), Italytel +39 0342 685141fax +39 0342 684592www.bonini.cominfo@bonini.com46° 08' 23" N9° 28' 08" E

assembly

Le fasi dell'assemblaggio avvengono in modo completamente automatico in clean room, sotto il costante controllo dei nostri operatori.

All'interno dei nostri laboratori, lo stampaggio avviene in modo

completamente automatico.

stam

pag

gio

pro

du

zio

ne

All the assembly phases are fully automatic, in clean room, constantly controlled by the operators.

In our laboratories, all the moulding processes are completely automatic.

pro

du

ctio

n

assemblaggio

mo

uld

ing

Turk

ish P

lant

- Cl

ean

Room

Cla

ss 10

.000

SKIPunto chiusoPlug (stopper port)PC

SPIPunto iniezione, latex-free, 6,0 mmInjection port latex-free, tube I.D. 6.0 mmPC - Polyisoprene

SPI66Punto iniezione, latex-free, 6,6 mmInjection port latex-free, tube I.D. 6.6 mmPC - Polyisoprene

SPImPunto iniezione con membrana,latex-free, 6,0 mmInjection port with membrane,tube I.D. 6.0 mmPC - Polyisoprene - PVC

SPT60r (SPT66r)Punto iniezione, latex-free, 6,0 mm, rosso (6,6 mm)Injection port latex-free, tube I.D. 6.0 mm, red (6.6 mm)PC - Polyisoprene - PP

RACCORDI SACCA

SPCPunto iniezione con cappuccio, 6,0mmInjection site with cap, tube I.D. 6.0mm PC - Polyisoprene - PP

SV48ctChiusura perforabile per sacche con capp. trasp, tubo 4,8mm

Injection port with cap, tube I.D. 4.8mmPC - Rubber - AL - PP

SV59ctChiusura perforabile per sacche con

capp. trasp, tubo EVA-PP 6,0mmInjection port with cap, EVA or PP tube

I.D. 6.0mmPC - Rubber - AL - PP

SV66ctChiusura perforabile per sacche con

capp. trasp, tubo 6,6mmInjection port with cap, tube I.D. 6.6mm

PC - Rubber - AL - PP

SVIChiusura perforabile per sacche, tubo 6,0mm

Injection port, tube I.D. 6.0mmPC - Rubber - AL

SVIctChiusura perforabile per sacche con

capp. trasp, tubo 6,0mmInjection port with cap, tube I.D. 6.0mm

PC - Rubber - AL - PP

STWTwist-off in PVC saldatoPVC Twist-off, weldedPVC

STWSTwist-off in PVC saldato con salvagocciaPVC Twist-off, weldedPVC

STWScTwist-off no PVC saldatoNo PVC Twist-off, weldedSEBS

STLTwist-off lungo apertoLong twist-off for automatic assemblyPVC

BAG CONNECTORS

STWS94Twist-off in PVC Draka saldato

Draka PVC Twist-off, weldedPVC

STW206Twist-off saldato in PVC azzurrato

Blue PVC Twist-off, weldedPVC

GM21gaCamera 1-2 vie piccola, gamma resistenteAssembled chamber, 1-2 way small, gamma stableSV21ga - MAX21 - C3Sga - B1

GM21mgnCamera 1-2 vie piccola con microgocciolatoio, gamma resistenteAssembled chamber, 1-2 way small with microdripper, gamma stableSV21ga - MAX21 - C3Sga - MGn - B1

GM21pCamera 1-2 vie piccola, no DOPAssembled chamber, 1-2 way small, DOP freeSV21ga - MAX21 - C3Sp - B1

GM21sCamera 1-2 vie piccola, ambrataAssembled chamber, 1-2 way small, colouredSV21ga - MAX21 - C3Ss - B1

CAMERE ASSEMBLATE

A1FgaCamera 1 via piccola con filtro

soluzione, gamma resistenteAssembled chamber, 1 way small with

solution filter, gamma stableC1Sga - C3Sga - C7S - B1

A1gaCamera 1 via piccola,

gamma resistenteAssembled chamber, 1 way

small, gamma stableC1Sga - C3Sga - B1

A2FgaCamera 2 vie piccola con filtro

soluzione, gamma resistenteAssembled chamber, 2 way small

with solution filter, gamma stableC12Sga - C3Sga - C5S - C7S - B1

A2gaCamera 2 vie piccola,

gamma resistenteAssembled chamber, 2 way

small, gamma stableC12Sga - C3Sga - C5S - B1

GM21FgaCamera 1-2 vie piccola con filtro soluzione, gamma resistenteAssembled chamber, 1-2 way small with solution filter, gamma stableSV21ga - MAX21 - C3Sga - C7S - B1

AB12FmganCamera 1-2 vie grande con filtro soluzione e microgocciolatoio, gamma resistenteAssembled chamber, 1-2 way big with solution filter and microdripperB2ga - B3 - B4 - B5ga - B6 - B1 - MGn

AB12gaCamera 1-2 vie grande, gamma resistenteAssembled chamber, 1-2 way big, gamma stableB2ga - B3 - B4 - B5ga - B6 - B1

AB12mganCamera 1-2 vie grande conmicrogocciolatoio, gamma resistenteAssembled chamber, 1-2 waybig with microdripperB2ga - B3 - B4 - B5ga - B6 - B1 - MGn

AB2FgaCamera 2 vie grande con filtro

soluzione, gamma resistenteAssembled chamber, 2 way big

with solution filter, gamma stableB2ga - B4 - B5ga - B6 - B1

AB12FbgaCamera 1-2 vie grande con filtro soluzionee on-off blu, gamma resistenteAssembled chamber, 1-2 way big with solution filter and blue on-off cap, gamma stableB2ga - B3b - B4 - B5ga - B6 - B1

AB2gaCamera 2 vie grande, gamma resistente

Assembled chamber, 2 way big, gamma stableB2ga - B5ga - B6 - B1

AB12FgaCamera 1-2 vie grande con filtro soluzione, gamma resistenteAssembled chamber, 1-2 way big with solution filter, gamma stableB2ga - B3 - B4 - B5ga - B6 - B1

N11FgaCamera assemblata 1 via grande con

filtro soluzione, gamma resistenteAssembled chamber, 1 way big with

solution filter, gamma stableB11ga - B4 - B5ga - B1

N11gaCamera assemblata 1 via

grande, gamma resistenteAssembled chamber, 1 way

big, gamma stableB11ga - B5ga - B1

ASSEMBLED CHAMBERS

B2gaPerforatore 2 vie grande, gamma resistente

2 way spike, big, gamma stablePVC

B3Cappuccio on-off, rosso

On-off cap, redPE/LD

B4Filtro soluzione grande

Solution filter, bigPE/LD - PA

B5gaVaschetta grande, gamma resistente

Drip chamber, big, gamma stablePVC

COMPONENTI

C7SFiltro soluzione piccoloSolution filter, smallPE/LD - PA

MAX21Tappino on-off blu con filtro ariaAir filter with on-off cap, bluePP - Membrane

SV21gaPerforatore 2 vie piccolo, gamma resistente2 way spike, small, gamma stablePVC

B1Cappuccio per perforatore

Protective cap for spikePE/LD

B11gaPerforatore 1 via grande, gamma resistente

1 way spike, big, gamma stablePVC

C12SgaPerforatore 2 vie piccolo, gamma resistente2 way spike, small, gamma stablePVC

C1SgaPerforatore 1 via piccolo, gamma resistente1 way spike, small, gamma stablePVC

C3SgaVaschetta piccola, gamma resistenteDrip chamber, small, gamma stablePVC

C5SFiltro aria piccolo, bluAir filter, small, bluePP - Membrane

D1NGuida roller per tubo 3x4,1mmRoller clamp body, 3x4.1mm tubing, unassembledPE/HD

D1RRRotellina per roller D1N, rossaRed roller wheelPE/HD

D2GALuer simmetrico doppio

Double luer connectorPS

D3Luer record per tubo 3x4,1mm

Luer record connector for tube 3x4.1mmPVC

B6Filtro aria grande, rossoAir filter, big, redPP - Membrane

D4Cappuccio per luer D3

Protective cap for luer connector D3PE/LD

CC20gaCoperchio per vaschetta, gamma resistenteCover for drip chamber, gamma stablePVC

D4MnCappuccio per luer D2GA

Protective cap for luer connector D2GAPE/LD

D5Guida roller per tubo 3x4,1mmRoller clamp body, 3x4.1mm tubing, unassembledABS

D5RWRotellina bianca per roller D5White roller wheelABS

FLR3503Regolatore di flusso 0/350ml

Precision flow controller 0/350ml tube 3x4.1mm

PC - TPE

FLR3505Regolatore di flusso 0/350ml

Precision flow controller 0/350ml tube 3x4.1mm

PC - TPE

COMPONENTS

MGnMicrogoccia, 60 gocce/mlMicrodripper adapter, 60 drops/mlABS

LA/WMatRaccordo luer lock maschio per tubo 3x4,1mm, ABS trasp.Male luer lock connector O.D. 3.3mm for tube 3x4.1mm, clear ABSABS

RA/DIFRaccordo para latex-free

Flashback latex freePolyisoprene

PALancetta aria

Air spikePVC

STAMPerforatore 1 via con cappuccio a frattura

1 way spike with break-off cap

PS1-2Perforatore sospeso 1-2 con attacco

femmina per tubo 3x4,1mmVented suspended spike, 1-2 way,

tube I.D. 4.1mmPS1-2na - MAX22 - C/PS

YB3FRaccordo y, connessione

tubo-tubo, latex free"Y" connector for tube-tube

connection, latex freeABS - Polyisoprene

COMPONENTI

LA/WFatRaccordo luer lock maschio per tubo 3x4,1mm, ABS trasp.Male luer lock connector I.D. 4.1mm for tube 3x4.1mm, clear ABSABS

LA/WatRaccordo luer lock maschio per para, ABS trasp.Male luer lock connector O.D. 4.3mm for flashback, clear ABSABS

LA/CCappuccio per luer lockProtective cap for luer lock connectorPE/LD

IPAFiltro aria piccolo, naturaleAir filter, small,naturalPP - Membrane

FSFiltro siringaSyringe filterPP - PA

FQ2Filtro aria per lancette

Air filterPE/LD - Membrane

R500Reggibottiglia per flacone 500ml500ml bottle suspenderPE/LD

R1000Reggibottiglia rigido

Bottle holder, rigidPS

R250Reggibottiglia per flacone 250ml250ml bottle suspenderPE/LD

COMPONENTS

BONINI

- Rev

. 2