Upload
fernando-cristian-perez-diaz
View
241
Download
4
Tags:
Embed Size (px)
DESCRIPTION
Catalogo bombas engranajes
Citation preview
Gear Pumps and Motors
Technical Catalog Series 26 Pumps
Series 26 Motors
Series L2 Pumps
2 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Table of Contents
Series 26 Pumps
Features ........................................................................................................................................................................3
General Specifications and Performance Data ..............................................................................................................4
Performance Data Charts ..............................................................................................................................................5
Standard Catalog Assemblies - Dimensions ................................................................................................................9
Order Numbers............................................................................................................................................................10
Optional Configurations ..............................................................................................................................................12
Component Parts - Dimensions ..................................................................................................................................13
Model Code - Single ....................................................................................................................................................16
Model Code - Multiple ................................................................................................................................................17
Side-Load Applications ................................................................................................................................................19
Load Sensing Priority Valve ........................................................................................................................................21
Series 26 Motors
General Specifications ................................................................................................................................................22
Performance Data........................................................................................................................................................23
Model Code - Single....................................................................................................................................................24
Series L2 Pumps
General Specifications and Performance Data ............................................................................................................25
Performance Data Charts ............................................................................................................................................26
Standard Catalog Assemblies - Dimensions ..............................................................................................................28
Order Numbers ..........................................................................................................................................................29
Optional Configurations ..............................................................................................................................................31
Component Parts - Dimensions ..................................................................................................................................32
Model Code - Single....................................................................................................................................................35
Model Code - Multiple ................................................................................................................................................36
3EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 PumpFeatures
Quiet Operation
• The 13-tooth gears, versus10 teeth in previouspumps, minimizes the flowripple. This reduces noiseas well as vibration.
• The improved trap reliefsnot only increase power,they also help keep oilflowing smoothly to reducenoise.
Improved Efficiency
• Improved bearing lubrica-tion system uses inlet oilinstead of high pressureoil, improving volumetricefficiency for more poweroutput.
• The highly polished shaftand gears improvemechanical efficiency andreduce wear on thesecomponents, adding to theservice life and reliability ofthe pump.
• The optimized trapped oilrelief areas help reducepressure ripple for quieteroperation. This alsodecreases the input powerrequirements.
Field Reversible
• The innovative new wearplate permits simple fieldreversibility of the pumpdirection. Simply open thepump, switch the drivegear and idler gear, reposi-tion the plug and reassem-ble. No extra parts areneeded.
Interchangeability
• The Series 26 Gear Pumphas been designed toretrofit equipment usingthe B1 and B2 GearPumps. Extra shafts, port-ing, and mounting configu-rations, as well as 13 avail-able displacements, giveyou the choices you needfor an easy conversion tothis superior pump.
Pressures to 3500 PSIand flow to 24.1 GPM
4 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 PumpGeneralSpecificationsand PerformanceData
Displacement cm3/r [in3/r] 6,6 8,2 9,5 10,8 13,8 16,7 19,7[.40] [.50] [.58] [.66] [.84] [1.02] [1.20]
Max. Intermittent Pressure bar [PSI] 241 241 241 241 241 241 241[3500] [3500] [3500] [3500] [3500] [3500] [3500]
Rated Speed (RPM) 3600 3600 3600 3600 3600 3600 3200Minimum Output Flow at 207 bar [3000 PSI] 20,1 25,0 29,5 33,7 43,5 55,3 57,9and Rated Speed LPM [GPM] [5.3] [6.6] [7.8] [8.9] [11.5] [14.6] [15.3]Input Power at 207 bar [3000 PSI] and 9,7 11,9 14,1 15,5 20,0 22,0 26,2Rated Speed and Cont. Pressure kW [HP] [13.0] [15.9] [18.9] [20.8] [26.8] [29,4] [35.2]
Displacement cm3/r [in3/r] 22,5 24,3 25,2 27,7 29,0 30,6[1.37] [1.48] [1.54] [1.69] [1.77] [1.87]
Max. Intermittent Pressure bar [PSI] 241 241 241 241 234 224[3500] [3500] [3500] [3500] [3400] [3250]
Rated Speed (RPM) 3000 3000 3000 3000 3000 3000Minimum Output Flow at 207 bar [3000 PSI] 62,1 67,0 69,7 76,5 79,9 84,4and Rated Speed LPM [GPM] [16.4] [17.7] [18.4] [20.2] [21.1] [22.3]Input Power at 207 bar [3000 PSI] and 27,3 30,5 31,0 33,4 35,4 37,4Rated Speed and Cont. Pressure kW [HP] [36.6] [40.9] [41.6] [44.8] [47.4] [50.1]
The performance data in the table above and the following graphs was collected using a mineral base oil with a viscosity of 133 SUS at 49°C [120°F].
Rotation Field ReversibleMounting Flange SAE A 2 BoltMax. Continuous Pressure† 210 bar [3000 PSI]*Max. Intermittent Pressure†† 240 bar [3500 PSI]**Minimum Speed at Continuous Pressure 750 RPMMaximum Rotating Torque at 0 Pressure 4 Nm [36 lb-in]Maximum Continuous Operating Temperature 105°C [220°F]Minimum Continuous Oil Viscocity 5.7 cSt [45 SUS]Minimum Operating Temperature -29°C [-20°F]Maximum Inlet Vacuum at Operating Condition 0,8 bar Abs. [11.6 psi Abs.]
† Continuous - pump may be run continuously at these ratings.
†† Intermittent - intermittent operation, 10% of every minute.
* 30.6 cm3/rev. [1.87 in3/rev.] displacement max. continuous pressure is 190 bar [2750 PSI].
** 30.6 cm3/rev. [1.87 in3/rev.] displacement max. intermittent pressure is 224 bar [3250 PSI].
For side load limits consult your Eaton representative.
Ordering Information
Catalog Assemblies CrossReference
Standard catalog assemblies arebuilt from high production partsand are the most economicalpump assemblies available in thisseries. The standard assembly
order number is a preassignedpart number and may be used toorder the specific standardassembly (see pages 10–13). Thefar right column lists the B1 or B2pump replaced by the Series 26pump.
5EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 PumpPerformance DataCharts
0 1000 2000 3000 3600
Speed RPM
13 [17]
12 [16]
11 [15]
10 [13]
9 [12]
8 [11]
7 [9]
6 [8]
5 [7]
4 [5]
3 [4]
2 [3]
1 [1.3]
0
0 1000 2000 3000 3600
Flow
in L
/min
. [G
PM]
@ 1
38 b
ar [
2000
PSI
]
6,56–19,68 cm3/rev [.40–1.20 in3/rev]
8,20 cm3/rev [.50 in3/rev]
6,56 cm3/rev [.40 in3/rev]
Speed RPM
0
10
20
30
40
50
60
70
[0]
[5]
[10]
[15]
0 1000 2000 3000 3600
Speed RPM
13 [17]
12 [16]
11 [15]
10 [13]
9 [12]
8 [11]
7 [9]
6 [8]
5 [7]
4 [5]
3 [4]
2 [3]
1 [1.3]
0
Inpu
t kW
[HP]
In
put k
W [H
P]
Inpu
t kW
[HP]
0 1000 2000 3000 3600
Speed RPM
26 [35]
24 [32]
22 [29.5]
20 [27]
18 [24]
16 [21.5]
14 [19]
12 [16]
10 [13]
8 [11]
6 [8]
4 [5]
2 [3]
0
9,51 cm3/rev [.58 in3/rev
8,2 [.50 ] 9.5
[.58]
10,8
[.66] 13,8
[.84]
19,7
[1.20
] 16
,7 [1
.02]
6,6 [.401]
35 Bar [500 PSI] 69 Bar [1000 PSI] 104 Bar [1
500 PSI]
138 Bar [2
000 P
SI]
172
Bar [250
0 PSI]
207 B
ar [3
000 P
SI]
35 Bar [500 PSI]
35 Bar [500 PSI]
69 Bar [1000 PSI]
69 Bar [1000 PSI] 104 Bar [1500 PSI]
104 Bar [1500 PSI]
138 B
ar [200
0 PSI]
138 Bar [2000 PSI]
172
Bar [2
500
PSI]
172 Bar [2
500 PSI]
207 B
ar [3
000 P
SI]
207 Bar [
3000 P
SI]
6 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
0 1000 2000 3000 3600
Speed RPM
13,78 cm3/rev [.84 in3/rev] 26 [35]
24 [32]
22 [29.5]
20 [27]
18 [24]
16 [21.5]
14 [19]
12 [16]
10 [13]
8 [11]
6 [8]
4 [5]
2 [3]
0
5 [ r a B 5 3 0 0 P ] I S
1 [ r a B 9 6 0 0 0
] I S P
r a B
4 8 1
[ 1 5 ] 0 0
1 3
] I S P
0 0 0 2 [ r a B
8
1
] I S P
0 0 5 2 [ r a B 2 7
2
] I S P 0 0 0 3 [ r a B 7 0
0 1000 2000 3200
Speed RPM
28 [37.5]
26 [35]
24 [32]
22 [29.5]
20 [27]
18 [24]
16 [21.5]
14 [19]
12 [16]
10 [13]
8 [11]
6 [5]
4 [4]
2 [3]
0
16,73 cm3/rev [1.02 in3/rev]
3
] I S P 0 0 5 [ r a B 5
9 6
] I S P 0 0 0 1 [ r a B
4 0 1
] I S P
0 0 5 1 [ r a B
1
] I S P
0 0
0 2 [ r a
B 8
3
2 7 1
] I S P
0 0 5 2 [ r a B 7 0 2
] I S P
0 0 0 3 [ r a B
0 1000 2000 3200
Speed RPM
28 [37.5]
26 [35]
24 [32]
22 [29.5]
20 [27]
18 [24]
16 [21.5]
14 [19]
12 [16]
10 [13]
8 [11]
6 [5]
4 [4]
2 [3]
0
19,68 cm3/rev [1.20 in3/rev]
0 1 [ r a B 9 6
0 0 P ] I S
0 5 1 [ r a B
4 0 1
0 P ] I S
S P
0 0 0 2 [ r a B
8 3 1
I ] ] I S P 0 0 5 2 [ r a B
2 7 1
5 [ r a B 5 3 0 0 ] I S P
P 0 0 0 3 [ r a B 7 0 2
S I ]
0 1000 2000 3000 3600
Speed RPM
10,82 cm3/rev [.66 in3/rev] 26 [35]
24 [32]
22 [29.5]
20 [27]
18 [24]
16 [21.5]
14 [19]
12 [16]
10 [13]
8 [11]
6 [8]
4 [5]
2 [3]
0
] I S P 0 0 5 [ r a B 5 3
] I S P 0 0 0 1 [ r a B 9 6
] I S P 0 0 5 1 [ r a B
4 0 1
] I S P
0 0 0 2 [ r a B
8 3 1
] I S P
0 0 5 2 [ r a B
2 7 1
] I S P
0 0 0 3 [ r a B 7 0 2
Inpu
t kW
[H
P]
Inpu
t kW
[H
P]
Inpu
t kW
[H
P]
Inpu
t kW
[H
P]
Series 26 PumpPerformance DataCharts
7EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
0 1000 2000 3000
28 [37.5]
26 [35]
24 [32]
22 [29.5]
20 [27]
18 [24]
16 [21]
14 [19]
12 [16]
10 [13]
8 [11]
6 [5]
4 [4]
2 [2.7]
0
22,47 cm3/rev [1.37 in3/rev]
0 1000 2000 3000
22,47–30,67 cm3/rev [1.37–1.87 in3/rev]
0
10
20
30
40
50
60
70
[0]
[10]
[5]
[15]
[20]
80
90
22,5 [1.37]
24,3 [1.48]
25,2 [1.54]
27,7 [1.69] 29,0 [1.77] 30,6 [1.87]
0 1000 2000 3000
32 [43]
30 [40]
28 [37.5]
26 [35]
24 [32]
22 [29.5]
20 [27]
18 [24]
16 [21]
14 [19]
12 [16]
10 [13]
8 [11]
6 [5]
4 [4]
2 [3]
0
24,27 cm3/rev [1.48 in3/rev]
207 B
ar [3
000 P
SI]
0 1000 2000 3000
32,84 [44]
29,84 [40]
26,86 [36]
23,87 [32]
20,89 [28]
17,90 [24]
14,92 [20]
11,94 [16]
8,95 [12]
5,97 [8]
2,98 [4]
0
25,56 cm3/rev [1.54 in3/rev]
Flow
in L
/min
. [G
PM]
@ 1
38 b
ar [
2000
PSS
I]
Inpu
t kW
[HP]
In
put k
W [H
P]
Inpu
t kW
[HP]
Speed RPM Speed RPM
Speed RPM Speed RPM
172 B
ar [2
500 P
SI]
138 B
ar [2
000 P
SI]
104 B
ar [15
00 PSI]
69 Bar [1000 PSI]
35 Bar [500 PSI]
35 Bar [500 PSI] 69 Bar [1
000 PSI] 104 Bar [
1500 P
SI]
138 B
ar [2
000 P
SI]
172 B
ar [2
500 P
SI]
207 B
ar [
3000
PSI
]
35 Bar [500 PSI] 69 Bar [1000 PSI]
104 B
ar [150
0 PSI]
138 B
ar [2
000 P
SI]
172 B
ar [
2500
PSI
]
207
Bar
[300
0 PSI
]
Series 26 PumpPerformance DataCharts
8 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 PumpPerformance DataCharts
0 1000 2000 3000
Speed RPM
40 [54]
38 [51]
36 [48]
34 [45.5]
32 [43]
30 [40]
28 [37.5]
26 [35]
24 [32]
22 [29.5]
20 [27]
18 [24]
16 [21]
14 [19]
12 [16]
10 [13]
8 [11]
6 [5]
4 [4]
2 [3]
0
27,72 cm3/rev [1.69 in3/rev] 29,03 cm3/rev [1.77 in3/rev] 30,67 cm3/rev [1.87 in3/rev]
Inpu
t kW
[H
P]
Inpu
t kW
[H
P]
Inpu
t kW
[H
P]
0 1000 2000 3000
Speed RPM
40 [54]
38 [51]
36 [48]
34 [45.5]
32 [43]
30 [40]
28 [37.5]
26 [35]
24 [32]
22 [29.5]
20 [27]
18 [24]
16 [21]
14 [19]
12 [16]
10 [13]
8 [11]
6 [5]
4 [4]
2 [3]
0 0 1000 2000 3000
Speed RPM
40 [54]
38 [51]
36 [48]
34 [45.5]
32 [43]
30 [40]
28 [37.5]
26 [35]
24 [32]
22 [29.5]
20 [27]
18 [24]
16 [21]
14 [19]
12 [16]
10 [13]
8 [11]
6 [5]
4 [4]
2 [3]
0
207 b
ar [
300 P
SI]
35 Bar [500 PSI]
69 Bar [1000 PSI] 10
4 Bar
[150
0 PSI] 13
8 Bar
[200
0 PSI
]
172 B
ar [
2500
PSI
]
207 b
ar [
300 P
SI]
35 Bar [500 PSI]
69 Bar [1000 PSI] 10
4 Bar
[150
0 PSI]
138 B
ar [2
000 P
SI]
172 B
ar [
2500
PSI
]
207
bar
[300
PSI
]
35 Bar [500 PSI]
69 Bar [
1000 P
SI]
104 B
ar [1
500 P
SI]
138 B
ar [
2000
PSI
]
172 B
ar [
2500
PSI
]
9EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Pressure PortRear Porting Suction Port
Rear Porting
25.9 [1.02]
21.1 [.83]
Driveshaft Centerline
18 [.71]
Suction PortSide Porting
46.2 [1.82] 92.5
[3.64] Left Hand Rotation Shown
83.3 [3.28]
47.6 [1.88]
130.0 [5.12]
106.4 [4.19]
18 [.71]
2X Dim A Pressure PortSide Porting
Dim B
See Shaft Drawing
Dia. 82.52±.030 [3.249±.001]
6.4 [.25]
15.0 [.59]
2X Dia. 11.56±.13 [.455±.005]
C L
C L
31.8 [1.25]
9 Tooth 16/32 DP 30° Involute Flat Root Class 1 Side Fit Spline SAE J498b 22.4 [.88] Min Full Spline
31.7 [1.25]
11 Tooth 16/32 DP 30° Involute Flat Root Class 1 Side Fit Spline SAE J498b 22.2 [.88] Full Depth
4.8 [.19]
Dia. 19.047±.003 [.7499±.0001]
31.7 [1.25] Key 4.724±.038
[.1860±.0015]
5/8 Inch 9 Tooth Spline Maximum Input Torque 62 Nm [550 lb-in]
3/4 Inch 11 Tooth Spline Maximum Input Torque 119 Nm [1050 lb-in]
3/4 Inch Straight Key Maximum Input Torque 113 Nm [1000 lb-in]
5/8 Inch Straight Key Maximum Input Torque 56 Nm [500 lb-in]
Key 3.94±.03
[.155±.001]
17.60±.13 [.693±.005]
Dia. 15.85±.03
[.624±.001]
31.8 [1.25]
23.9 [.94] 17.4 [.68] 4.8 [.19]
21.01±.10 [.827±.004]
Series 26 PumpStandard CatalogAssemblies -Dimensions
All dimensions are in mm [in].
MODEL 26001 26002 26003 26004 26005 26006 26007
Displacement (cm3/r [in3/r]) 6.6 [.40] 8.2 [.50] 9.5 [.58] 10.8 [.66] 13.8 [.84] 16.7 [1.02] 19.7 [1.20]Dimension A (mm [in]) 72.6 [2.86] 74.3 [2.93] 75.9 [2.99] 77.5 [3.05] 80.7 [3.18] 83.9 [3.30] 87.1 [3.43]Dimension B (mm [in]) 93.2 [3.67] 94.9 [3.74] 96.5 [3.80] 98.1 [3.86] 101.3 [3.99] 104.5 [4.11] 107.7 [4.24]
MODEL 26008 26009 26010 26011 26012 26013
Displacement (cm3/r [in3/r]) 22.5 [1.37] 24.3 [1.48] 25.2 [1.54] 27.7 [1.69] 29.0 [1.77] 30.6 [1.87]Dimension A (mm [in]) 90.3 [3.56] 92.7 [3.65] 93.5 [3.68] 96.7 [3.81] 98.6 [3.88] 99.9 [3.93]Dimension B (mm [in]) 110.9 [4.37] 113.3 [4.46] 114.1 [4.49] 117.3 [4.62] 119.1 [4.69] 120.5 [4.74]
* Multiple pump inputtorque limitations:the total torque for multi-ple pump displacementsand pressure combina-tions cannot exceed themaximum input torque
rating of the shaft. The proper formula isPressure times Displacementdivided by 6.28.
10 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 PumpOrder Numbers
RIGHT HAND LEFT HAND SAE O-RING SAE O-RINGROTATION ROTATION PORT PRESSURE SUCTIONPRODUCT NO PRODUCT NO SHAFT LOCATION PORT SIZE PORT SIZE REPLACES
Model 26001 – 6,6 cm3/r [.40 in3/r] Displacement26001-RZG 26001-LZG 5/8 Keyed Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24300-RZA/LZA26001-RZH 26001-LZH 5/8 Keyed Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24300-RZC/LZD26001-RZJ 26001-LZJ 5/8 9 T Spline Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24300-RZB/LZA26001-RZK 26001-LZK 5/8 9 T Spline Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24300-RZD/LZEModel 26002 – 8,2 cm3/r [.50 in3/r] Displacement26002-RZA 26002-LZA 3/4 11T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25300-RSA/LSA26002-RZB 26002-LZB 3/4 11T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25300-RSB/LSB26002-RZC 26002-LZC 3/4 Keyed Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25300-RSC/LSC26002-RZD 26002-LZD 3/4 Keyed Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25300-RSD/LSD26002-RZE 26002-LZE 5/8 9 T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25300-RSE/LSE26002-RZF 26002-LZF 5/8 9 T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25300-RSF/LSF26002-RZG 26002-LZG 5/8 Keyed Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24301-RZC/LZA26002-RZH 26002-LZH 5/8 Keyed Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24301-RZG/LZG26002-RZJ 26002-LZJ 5/8 9 T Spline Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24301-RZD/LZB26002-RZK 26002-LZK 5/8 9 T Spline Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24301-RZH/LZHModel 26003 – 9,5 cm3/r [.58 in3/r] Displacement26003-RZG 26003-LZG 5/8 Keyed Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24302-RZB/LZB26003-RZH 26003-LZH 5/8 Keyed Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24302-RZC/LZD26003-RZJ 26003-LZJ 5/8 9 T Spline Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24302-RZA/LZA26003-RZK 26003-LZK 5/8 9 T Spline Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24302-RZD/LZEModel 26004 – 10,8 cm3/r [.66 in3/r] Displacement26004-RZA 26004-LZA 3/4 11T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25301-RSA/LSA26004-RZB 26004-LZB 3/4 11T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25301-RSB/LSB26004-RZC 26004-LZC 3/4 Keyed Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25301-RSC/LSC26004-RZD 26004-LZD 3/4 Keyed Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25301-RSD/LSD26004-RZE 26004-LZE 5/8 9 T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25301-RSE/LSE26004-RZF 26004-LZF 5/8 9 T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25301-RSF/LSF26004-RZG 26004-LZG 5/8 Keyed Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24303-RZB/LZB26004-RZH 26004-LZH 5/8 Keyed Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24303-RZE/LZF26004-RZJ 26004-LZJ 5/8 9 T Spline Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24303-RZD/LZA26004-RZK 26004-LZK 5/8 9 T Spline Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24303-RZF/LZGModel 26005 – 13,8 cm3/r [.84 in3/r] Displacement26005-RZA 26005-LZA 3/4 11T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25302-RSA/LSA26005-RZB 26005-LZB 3/4 11T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25302-RSB/LSB26005-RZC 26005-LZC 3/4 Keyed Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25302-RSC/LSC26005-RZD 26005-LZD 3/4 Keyed Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25302-RSD/LSD26005-RZE 26005-LZE 5/8 9 T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25302-RSE/LSE26005-RZF 26005-LZF 5/8 9 T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25302-RSF/LSF26005-RZG 26005-LZG 5/8 Keyed Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24304-RZC/LZA26005-RZH 26005-LZH 5/8 Keyed Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24304-RZG/LZF26005-RZJ 26005-LZJ 5/8 9 T Spline Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24304-RZD/LZB26005-RZK 26005-LZK 5/8 9 T Spline Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24304-RZH/LZGModel 26006 – 16,7 cm3/r [1.02 in3/r] Displacement26006-RZA 26006-LZA 3/4 11T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25303-RSA/LSA26006-RZB 26006-LZB 3/4 11T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25303-RSB/LSB26006-RZC 26006-LZC 3/4 Keyed Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25303-RSC/LSC26006-RZD 26006-LZD 3/4 Keyed Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25303-RSD/LSD26006-RZE 26006-LZE 5/8 9 T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25303-RSE/LSE26006-RZF 26006-LZF 5/8 9 T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25303-RSF/LSF26006-RZG 26006-LZG 5/8 Keyed Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24305-RZC/LZA26006-RZH 26006-LZH 5/8 Keyed Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24305-RZG/-LZF26006-RZJ 26006-LZJ 5/8 9 T Spline Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24305-RZD/LZB26006-RZK 26006-LZK 5/8 9 T Spline Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24305-RZH/LZG
* 5/8 9 T Spline has a maximum allowable input torque of 62 Nm [550 lb-in].
** 5/8 Keyed shaft has a maximum allowable input torque of 56 Nm [500 lb-in].
11EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 PumpOrder Numbers
RIGHT HAND LEFT HAND SAE O-RING SAE O-RINGROTATION ROTATION PORT PRESSURE SUCTIONPRODUCT NO PRODUCT NO SHAFT LOCATION PORT SIZE PORT SIZE REPLACES
Model 26007 – 19,7 cm3/r [1.20 in3/r] Displacement26007-RZA 26007-LZA 3/4 11T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25304-RSA/LSA26007-RZB 26007-LZB 3/4 11T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25304-RSB/LSB26007-RZC 26007-LZC 3/4 Keyed Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25304-RSC/LSC26007-RZD 26007-LZD 3/4 Keyed Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25304-RSD/LSD26007-RZE 26007-LZE *5/8 9 T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25304-RSE/LSE26007-RZF 26007-LZF *5/8 9 T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25304-RSF/LSF26007-RZG 26007-LZG **5/8 Keyed Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24306-RZA/LZA26007-RZH 26007-LZH **5/8 Keyed Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24306-RZE/LZF26007-RZJ 26007-LZJ *5/8 9 T Spline Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24306-RZD/LZB26007-RZK 26007-LZK *5/8 9 T Spline Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24306-RZF/LZGModel 26008 – 22,5 cm3/r [1.37 in3/r] Displacement26008-RZA 26008-LZA 3/4 11T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25305-RSA/LSA26008-RZB 26008-LZB 3/4 11T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25305-RSB/LSB26008-RZC 26008-LZC 3/4 Keyed Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25305-RSC/LSC26008-RZD 26008-LZD 3/4 Keyed Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25305-RSD/LSD26008-RZE 26008-LZE *5/8 9 T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25305-RSE/LSE26008-RZF 26008-LZF *5/8 9 T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25305-RSF/LSFModel 26009 – 24,3 cm3/r [1.48 in3/r] Displacement26009-RZG 26009-LZG **5/8 Keyed Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24307-RZC/LZA26009-RZH 26009-LZH **5/8 Keyed Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24307-RZG/LZF26009-RZJ 26009-LZJ *5/8 9 T Spline Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24307-RZD/LZB26009-RZK 26009-LZK *5/8 9 T Spline Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24307-RZH/LZGModel 26010 – 25,2 cm3/r [1.54 in3/r] Displacement26010-RZA 26010-LZA 3/4 11T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25306-RSA/LSA26010-RZB 26010-LZB 3/4 11T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25306-RSB/LSB26010-RZC 26010-LZC 3/4 Keyed Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25306-RSC/LSC26010-RZD 26010-LZD 3/4 Keyed Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25306-RSD/LSD26010-RZE 26010-LZE *5/8 9 T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25306-RSE/LSE26010-RZF 26010-LZF *5/8 9 T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25306-RSF/LSFModel 26011 – 27,7 cm3/r [1.69 in3/r] Displacement26011-RZA 26011-LZA 3/4 11T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25307-RSA/LSA26011-RZB 26011-LZB 3/4 11T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25307-RSB/LSB26011-RZC 26011-LZC 3/4 Keyed Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25307-RSC/LSC26011-RZD 26011-LZD 3/4 Keyed Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25307-RSD/LSD26011-RZE 26011-LZE *5/8 9 T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25307-RSE/LSE26011-RZF 26011-LZF *5/8 9 T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25307-RSF/LSFModel 26012 – 29,0 cm3/r [1.77 in3/r] Displacement26012-RZG 26012-LZG **5/8 Keyed Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24308-RZA/LZA26012-RZH 26012-LZH **5/8 Keyed Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24308-RZE/LZF26012-RZJ 26012-LZJ *5/8 9 T Spline Side 7/8-14 UNF-2B 1-1/16-12 UN-2B 24308-RZD/LZB26012-RZK 26012-LZK *5/8 9 T Spline Rear 7/8-14 UNF-2B 1-1/16-12 UN-2B 24308-RZF/LZGModel 26013 – 30,6 cm3/r [1.87 in3/r] Displacement26013-RZA 26013-LZA 3/4 11T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25308-RZA/LZA26013-RZB 26013-LZB 3/4 11T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25308-RZB/LZB26013-RZC 26013-LZC 3/4 Keyed Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25308-RZC/LZC26013-RZD 26013-LZD 3/4 Keyed Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25308-RZD/LZD26013-RZE 26013-LZE *5/8 9 T Spline Side 7/8-14 UNF-2B 1-5/16-12 UN-2B 25308-RZE/LZE26013-RZF 26013-LZF *5/8 9 T Spline Rear 7/8-14 UNF-2B 1-5/16-12 UN-2B 25308-RZF/LZF
* 5/8 9 T Spline has a maximum allowable input torque of 62 Nm [550 lb-in].
** 5/8 Keyed shaft has a maximum allowable input torque of 56 Nm [500 lb-in].
12 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 PumpOptionalConfigurations
The Series 26 Gear Pumpcomponents can be assem-bled into many optional con-figurations. The versatiledesign allows you to assem-ble a pump to meet yourspecific needs.
Model codes for single andmultiple pumps along withthe component part dimen-sion drawings are given onthe following pages.
Single Gear Pump Double Gear Pump withCommon Suction Port
Triple Gear Pump with Two Suction Ports
Single Gear Pump with Relief Valve
Double Gear Pump with Relief Valve
Triple Gear Pump with Two Suction Ports and Relief Valve
Single Gear Pump with FlowDivider and Relief Valve
Double Gear Pump with FlowDivider and Relief Valve
Triple Gear Pump with Two SuctionPorts, Flow Divider and Relief Valve
Single Gear Pump withTandem Backplate
Double Gear Pump withTandem Backplate
Triple Gear Pump with Two SuctionPorts and Tandem Backplate
Single Gear Pump w/TandemFlow Divider Backplate
Double Gear Pump with TandemFlow Divider Backplate
Triple Gear Pump with Two Suction Ports and Tandem Flow Divider Backplate
13EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 PumpComponent Parts -Dimensions
All dimensions are in mm [in].
Model 26001 26002 26003 26004 26005 26006 26007Displacement (cm3/r [in3/r]) 6.6 [.40] 8.2 [.50] 9.5 [.58] 10.8 [.66] 13.8 [.84] 16.7 [1.02] 19.7 [1.20]Dimension A (mm [in]) 14.4 [.57] 16.3 [.64] 17.7 [.70 ] 19.5 [.77] 22.7 [.89] 25.9 [1.02] 29.1 [1.15]
Model 26008 26009 26010 26011 26012 26013Displacement (cm3/r [in3/r]) 22.5 [1.37] 24.3 [1.48] 25.2 [1.54] 27.7 [1.69] 29.0 [1.77] 30.6 [1.87]Dimension A (mm [in]) 32.3 [1.27] 34.7 [1.36] 35.5 [1.40] 38.7 [1.52] 40.3 [1.59] 41.9 [1.65]
Front Plate
SAE A 2 Bolt Flange usedon all Standard CatalogAssemblies
Body
Used on Single andMultiple Pumps
83.3 [3.28]
47.6 [1.88]
130.0 [5.12] 106.4
[4.19]
30.4 [1.20]
Dia. 82.52±.03
[3.249±.001]
6.4 [.25]
15.0 [.59]
2X Dia. 11.56±.13 [.455±.005]
C L
90 [3.54]
45 [1.77]4X 9.1 [.36]
4X 45˚
47,8[1.88]
125,7[4.95]
134,9[5.31]
36,1[1.42]72,1
[2.84]
100,1[3.94]
34,5[1.36]
Ø 79.92 +/- 0,03[3.146 +/- 0.001]
7,1[.28]
146,0 [5.75]174,5 [6.87]
Interrupted pilot does not allow o-ring sealing. A Gasket or sealant must be used in wet mount applications.
9,4[.37]
2X Ø 14,27 [.562]
Ø 101,58 +/- 0,03[3.999 +/- .001]
Dim A
“B” Mount
4 Bolt Euro Mount
14 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 PumpComponent Parts -Dimensions
All dimensions are in mm [in].
Flow Divider Backplate
Used on Single andMultiple Pumps
(No Relief Valve)
63.8 [2.51]
55.1 [2.17]
48.8 [1.92]
58.2 [2.29]
18 [.71]
90.9 [3.58]
Driveshaft Centerline 38.1
[1.50]
1.3 [.05]
Secondary PressurePort Side Porting
Priority PressurePort Side Porting
30.2 [1.19]
19.3 [.76]
Suction PortRear Porting
Priority PressurePort Rear Porting
Secondary PressurePort Rear Porting
Suction PortSide Porting
Relief Valve
70.1 [2.76]
45.5 [1.79]
79.8
Right Hand Rotation Shown
C L Optional Hex Plug
[3.14]
Backplate
Used on Single andMultiple Pumps
Left Hand Rotation Shown
Pressure PortRear Porting Suction Port
Rear Porting
25.9 [1.02]
21.1 [.83]
Centerline
18 [.71]
Suction PortSide Porting
46.2 [1.82] 92.5
[3.64]
18 [.71]
27.7 [1.09]
Pressure PortSide Porting 48.3
[1.90]
C L
Driveshaft
15EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Relief Valve Backplate
Used on Single andMultiple Pumps - RightHand Rotation Shown
18.1 [.71]
39.1 [1.54]
27.7 [1.09]
Relief Valve 21.8
[.86]
66 [2.60]
Pressure Port Rear Porting
Suction PortRear Porting
25.9 [1.02]
21.1 [.83]
Driveshaft Centerline
Suction PortSide Porting
47.8 [1.88]
95.5 [3.76]
Pressure PortSide Porting
52.3 [2.06]
58.5 [2.31]
Relief Valve External Drain 7/8-14 SAE 11.7
[.46]
C L
Series 26 PumpComponent Parts -Dimensions
All dimensions are in mm [in].
Tandem Backplate
Used on Single andMultiple Pumps
SAE AA 2 Bolt Flange
46.2[1.82] 92.5
[3.64]
DriveshaftCenterline
18[.71]
Suction Port
Right Hand Rotation Shown
20.8[.82]50.8
[2.00]
See Model Code forOutput Shaft Options
82.5[3.25]
2X 3/8-16CL
PressurePort
9 tooth 20/40 DP 30˚ invlt flat root class I side fit spline SAE J498b 9,7 [.38] min. full spline
Max Torque Rating: 29.5 Nm [261 lbf•in]
15,7 [.62]
Adaptor Plate
Used on Multiple Pumps -Right Hand Rotation Shown
18.1 [.71]
46.2 [1.82]
62.7 [2.47]
Driveshaft Centerline
48.3 [1.90]
Pressure Port
C L
SuctionPort
16 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 PumpModel Code -Single
ACN * * ** ** A 0 00 00 00 0 00 00 0 A
1, 2, 3 6, 7 8, 94 5 18 242310 11
All dimensions are in inches.
26 Series
ACN – Gear Pump - Single Unit
Unit Type
A – PlainB – Flow Divider with/without
Relief Valve (Pos. 14-15)C – Relief Valve (Pos. 16-17)
Input Rotation (viewed
from input shaft end)
L – Left-hand Rotation CCWR – Right-hand Rotation CW
Displacement
(cm3/r [in3/r])
01 = 6.6 [.40]02 = 8.2 [.50]03 = 9.5 [.58]04 = 10.8 [.66]05 = 13.8 [.84]06 = 16.7 [1.02]07 = 19.7 [1.20]08 = 22.5 [1.37]09 = 24.3 [1.48]10 = 25.2 [1.54]11 = 27.7 [1.69]12 = 29.0 [1.77]13 = 30.6 [1.87]
Input Shaft
AA = 5/8 Inch Dia. 9 ToothSpline 16/32 Pitch ShaftExtension 31.8 [1.25]
AB = 3/4 Inch Dia. 11 ToothSpline 16/32 Pitch ShaftExtension 31.8 [1.25]
AC = 3/4 Inch Dia. StraightKeyed, Keyway 4.8 x 25.4 [.19x 1.00] Shaft Extension 31.8[1.25]
AD = 5/8 Inch Dia. StraightKeyed, Keyway 4.1 X 18.3 [.16X .72] Shaft Extension 31.8[1.25]
Mounting Features
A = SAE 2-Bolt A Flange,Series 82-2
B = SAE 2-Bolt B Flange,Series 101-2
D = European 4-Bolt
Auxiliary Mounting
Features
0 - No Rear MountingC - (2-Bolt AA) SAE FlangeSeries 50-2, with 9 ToothInternal Spline 20/40 Pitch,Accepts 25.4 [1.00] ShaftExtension
Ports, Sizes and
Location- Backplate
01 = Plain: Suction Port1.3125-12 UN-2B SAE O-ringPort; Pressure Port .875-14UNF-2B SAE O-ring Port - SideSports
02 = Plain: Suction Port1.3125-12 UN-2B SAE O-ringPort; Pressure Port .875-14UNF-2B SAE O-Ring Port -Rear Ports
03 = Plain: Suction Port1.0625-12 UN-2B SAE O-ringPort; Pressure Port .875-14UNF-2B SAE O-ring PortAccepts Fittings Per SAEJ1926 - Side Ports
04 = Plain: Suction Port1.0625-12 UN-2B SAE O-ringPort; Pressure Port .875-14UNF-2B SAE O-ring PortAccepts Fittings Per SAEJ1926 -Rear Ports
08 = Plain Thru Shaft: SuctionPort 1.0625-12 UN-2B SAE O-ring Port; Pressure Port .875-14 UNF-2B SAE O-ring Port -Side Ports
15 = Relief Valve: Suction Port1.0625-12 UN-2B SAE O-ringPort; Pressure Port .875-14UNF-2B SAE O-ring Port - SidePorts; Drain Port .875-14 UNF-2B SAE O-ring Port
16 = Relief Valve: Suction Port1.0625-12 UN-2B SAE O-ringPort; Pressure Port .875-14UNF-2B SAE O-ring Port - RearPorts; Drain Port .875-14 UNF-2B SAE O-ring Port
20 = Flow Divider: SuctionPort 1.3125-12 UN-2B SAE O-ring Port; Priority PressurePort .750-16 UNF-2B SAE O-ring Port; Secondary PressurePort .875-14 UNF-2B SAE O-ring Port - Side Ports
21 = Flow Divider: SuctionPort 1.3125-12 UN-2B SAE O-ring Port; Priority PressurePort .750-16 UNF-2B SAE O-ring Port; Secondary PressurePort .875-14 UNF-2B SAE O-ring Port - Rear Ports
Priority Flow Divider
Setting (LPM [GPM])
00 = No Flow Setting
AA = 3.8 [1.00]
AD = 7.6 [2.00]
AJ = 11.4 [3.00]
AL = 15.1 [4.00]
AN = 18.9 [5.00]
AR = 22.7 [6.00]
AS = 26.5 [7.00]
AT = 30.3 [8.00]
Relief Valve Full Flow
Setting (bar [PSI])
00 = No Relief Valve Setting
AA = 34.5 [ 500]
AB = 51.7 [ 750]
AC = 68.9 [1000]
AE = 86.2 [1250]
AF = 103.4 [1500]
AJ = 120.7 [1750]
AL = 137.9 [2000]
AN = 155.1 [2250]
AP = 172.4 [2500]
AR = 189.6 [2750]
AS = 206.8 [3000]
BR = 241.3 [3500]
BT = 224.1 [3250]
Test Data
0 - GenericA - Unit Specific (required for flow divider and relief valve options.)
Special Features
00 - No Special FeaturesAB - Viton Shaft Seal
Paint
00 - None0A - Red Primer0B - Black
Identification
0 - Standard
Design Code
A - A
24
23
21, 22
18
16, 17
5
6, 7
19, 20
14, 15
12, 13
11
10
8, 9
4
1, 2, 3
12, 13 14, 15 16, 17 19, 20 21, 22
Series 26 Gear Pumps canbe ordered by using the fol-lowing Model Code.
A twenty-four digit codingsystem has been designedto identify the featurespresently available on singlegear pumps. The charactersand their relative positions
within the code identify spe-cific features.
Use the Model Code Matrixas an aid when assemblingthe model code for thepump with the features youdesire. It may be helpful tophotocopy the matrix and
write the numbers and let-ters into the boxes as youselect features.
All twenty-four digits of thecode must be submittedwhen ordering.
17EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 PumpModel Code -Multiple
ACM * * ** ** ** ** ** ** ** 00 00 A 0 0 00 00 0 B
1, 2, 3 6, 7 8, 9 10, 114 5 24 323125 26
All dimensions are in inches.
26 Series
ACM – Gear Pump - Multiple Unit
Unit Type
A – PlainB – Flow Divider with/without
Relief Valve (Pos. 20-21)C – Relief Valve
Input Rotation (viewed
from input shaft end)
L – Left-hand Rotation CCWR – Right-hand Rotation CW
Displacement - Front
(cm3/r [in3/r])
01 = 6.6 [.40]02 = 8.2 [.50]03 = 9.5 [.58]04 = 10.8 [.66]05 = 13.8 [.84]06 = 16.7 [1.02]07 = 19.7 [1.20]08 = 22.5 [1.37]09 = 24.3 [1.48]10 = 25.2 [1.54]11 = 27.7 [1.69]12 = 29.0 [1.77]13 = 30.6 [1.87]
Displacement - Ctr.
Triple Only (cm3/r [in3/r])
01 = 6.6 [.40]02 = 8.2 [.50]03 = 9.5 [.58]04 = 10.8 [.66]05 = 13.8 [.84]06 = 16.7 [1.02]07 = 19.7 [1.20]08 = 22.5 [1.37]09 = 24.3 [1.48]10 = 25.2 [1.54]11 = 27.7 [1.69]12 = 29.0 [1.77]13 = 30.6 [1.87]99 = No Center Displacement
Displacement - Rear
(cm3/r [in3/r])
01 = 6.6 [.40]02 = 8.2 [.50]03 = 9.5 [.58]04 = 10.8 [.66]05 = 13.8 [.84]06 = 16.7 [1.02]07 = 19.7 [1.20]08 = 22.5 [1.37]09 = 24.3 [1.48]10 = 25.2 [1.54]11 = 27.7 [1.69]12 = 29.0 [1.77]13 = 30.6 [1.87]
Input Shaft
AA = 5/8 Inch Dia. 9 ToothSpline 16/32 Pitch ShaftExtension 31.8 [1.25]
AB = 3/4 Inch Dia. 11 ToothSpline 16/32 Pitch ShaftExtension 31.8 [1.25]
AC = 3/4 Inch Dia. StraightKeyed, Keyway 4.8 x 25.4 [.19 x1.00] Shaft Extension 31.8 [1.25]
AD = 5/8 Inch Dia. StraightKeyed, Keyway 4.1 X 18.3 [.16 X.72] Shaft Extension 31.8 [1.25]
Front Adapter Ports
01 = Suction Port 1-5/8–12UN-2B SAE O-ring Port;Pressure Port 7/8–14 UNF-2BSAE O-ring Port
05 = Suction Port 1-5/16–12UN-2B SAE O-ring Port;Pressure Port 7/8–14 UNF-2BSAE O-ring Port
Ports - Rear Adapter
(Triple Units)
00 = No Rear Adaptor
01 = Suction Port 1-5/8–12UN-2B SAE O-ring Port;Pressure Port 7/8–14 UNF-2BSAE O-ring Port
05 = Suction Port 1-5/16–12UN-2B SAE O-ring Port;Pressure Port 7/8–14 UNF-2BSAE O-ring Port
Ports, Sizes and
Location- Backplate
01 = Plain: Suction Port 1-5/16–12 UN-2B SAE O-ringPort Size; Pressure Port7/8–14 UNF-2B SAE O-ringPort–Side Ports
02 = Plain: Suction Port 1-5/16–12 UN-2B SAE O-ringPort Size; Pressure Port7/8–14 UNF-2B SAE O-ringPort–Rear Ports
03 = Plain: Suction Port 1-1/16–12 UN-2B SAE O-ringPort Size; Pressure Port7/8–14 UNF-2B SAE O-ringPort–Side Ports
04 = Plain: Suction Port 1-1/16–12 UN-2B SAE O-ringPort Size; Pressure Port7/8–14 UNF-2B SAE O-ringPort–Rear Ports
08 = Plain Tandem: SuctionPort 1.0625-12 UN-2B SAE O-ring Port; Pressure Port .875-14 UNF-2B SAE O-ring Port -Side Ports
14 = Plain: Suction Port 1-5/16–12 UN-2B SAE O-ringPort Size–(Plugged); PressurePort 7/8–14 UNF-2B SAE O-ring Port–Side Ports, usedwith position 14 and 15–01and 16 and 17–10
17 = Plain: Suction Port 1-5/16–12 UN-2B SAE O-ringPort Size–(Plugged);Pressure Port 7/8–14 UNF-2BSAE O-ring Port–Rear Ports,used with position 14 and15–01 and 16 and 17–01
18 = Plain Tandem: SuctionPort 1.0625-12 UN-2B SAE O-ring Port (Plugged); PressurePort .875-14 UNF-2B SAE O-ring Port - Side Ports
18, 19
16, 17
14, 1510, 11
8, 9
5
6, 712, 13
4
1, 2, 3
12, 13 14, 15 16, 17 18, 19 20, 21 22,23 27 ,28 29, 30
Series 26 Gear Pumps canbe ordered by using the fol-lowing Model Code.
A thirty-two digit coding sys-tem has been designed toidentify the featurespresently available onMultiple gear pumps.
The characters and their rela-tive positions within the codeidentify specific features.
Use the Model Code Matrixas an aid when assemblingthe model code for thepump with the features you
desire. It may be helpful tophotocopy the matrix andwrite the numbers and let-ters into the boxes as youselect features.
All thirty-two digits of thecode must be submittedwhen ordering.
18 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 PumpModel Code -Multiple
19 = Plain: Suction Port1.3125-12 UN-2B SAE O-ringPort (Plugged); Pressure Port1.0625-12 UN-2B SAE O-ringPort - Side Ports
20 = Relief Valve: Suction Port1.0625-12 UN-2B SAE O-ringPort; Pressure Port .875-14UNF-2B SAE O-ring Port -SIDE Ports; DRAIN Port .875-14 UNF-2B SAE O-ring Port
21 = Relief Valve: Suction Port1.0625-12 UN-2B SAE O-ringPort; Pressure Port .875-14UNF-2B SAE O-ring Port - RearPorts; DRAIN Port .875-14UNF-2B SAE O-ring Port - TOPPort
27 = Flow Divider: SuctionPort 1.3125-12 UN-2B SAE O-ring Port; Priority PressurePort .750-16 UNF-2B SAE O-ring Port; Secondary PressurePort .875-14 UNF-2B SAE O-ring Port - SIDE Ports
28 = Flow Divider: SuctionPort 1.3125-12 UN-2B SAE O-ring Port; Priority PressurePort .750-16 UNF-2B SAE O-ring Port; Secondary PressurePort .875-14 UNF-2B SAE O-ring Port - Rear Ports
29 = Flow Divider: SuctionPort 1.0625-12 UN-2B SAE O-ring Port; Priority PressurePort .5625-18 UNF-2B SAE O-ring Port; Secondary PressurePort .875-14 UNF-2B SAE O-ring Port - SIDE PortsConsult your Eaton representativewhen requiring common inlet option.
Priority Flow Divider
Setting (LPM [GPM])
00 = No Flow Setting
AA = 3.8 [1.00]
AD = 7.6 [2.00]
AJ = 11.4 [3.00]
AL = 15.1 [4.00]
AN = 18.9 [5.00]
AR = 22.7 [6.00]
AS = 26.5 [7.00]
AT = 30.3 [8.00]
Relief Valve Full Flow
Setting (bar [PSI])
00 = No Relief Valve Setting
AA = 34.5 [500]
AB = 51.7 [750]
AC = 68.9 [1000]
AE = 86.2 [1250]
AF = 103.4 [1500]
AJ = 120.7 [1750]
AL = 137.9 [2000]
AN = 155.1 [2250]
AP = 172.4 [2500]
AR = 189.6 [2750]
AS = 206.8 [3000]
Mounting Features
(Front)
A = (2-Bolt A) SAE Flange,Series 82-3
C = (2-Bolt B) SAE FlangeSeries 82.3
G = (4-Bolt) European
Auxiliary Mounting
Features
0 = No Rear MountingC = (2-Bolt AA) SAE FlangeSeries 50-2, with 9 ToothInternal Spline 20/40 Pitch,Accepts 25.4 [1.00] ShaftExtension
Test Data
0 - GenericA - Unit Specific (required for flow divider and relief valve options.)
Special Features
00 - No Special FeaturesAB - Viton Shaft Seal
Paint
00 - None0A - Red Primer0B - Black
Identification
0 - Standard
Design Code
B - B
20, 21
22,23
25
24
32
31
29, 30
26
27, 28
ACM * * ** ** ** ** ** ** ** 00 00 A 0 0 00 00 0 B
1, 2, 3 6, 7 8, 9 10, 114 5 24 323125 26
All dimensions are in inches.
12, 13 14, 15 16, 17 18, 19 20, 21 22,23 27 ,28 29, 30
19EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 PumpSide-LoadApplications
Maximum AllowableOperating Pressures
0° Pump Inlet
0°
50°
0°45°
PumpInlet
PumpInlet
45°
50°
0° Pump Inlet
Y
Pitch Dia.
CW Rotation
CW Rotation
CCW Rotation
CCW Rotation
Ideal positions shown. Side load is acceptablewithin 90° of either side ofthe ideal position. Chartsare based on 100% slackside tension. Max. speedper catalog. Max. operatingpressure shown.
Gear Drive
Pulley Drive
PULLEY φ 2 4 6 8 10 12
GEAR PITCH φ 1 2 3 4 5 6
Y Dimension2.0” 3000 3000 3000 3000 3000 30001.5” 3000 3000 3000 3000 3000 30001.0” 3000 3000 3000 3000 3000 30000.5” 3000 3000 3000 3000 3000 30000” 3000 3000 3000 3000 3000 3000
0.40/0.50 CID
PULLEY φ 2 4 6 8 10 12
GEAR PITCH φ 1 2 3 4 5 6
Y Dimension2.0” 2250 3000 3000 3000 3000 30001.5” 2250 3000 3000 3000 3000 30001.0” 2500 3000 3000 3000 3000 30000.5” 2500 3000 3000 3000 3000 30000” 2750 3000 3000 3000 3000 3000
0.58/0.66 CID
PULLEY φ 2 4 6 8 10 12
GEAR PITCH φ 1 2 3 4 5 6
Y Dimension2.0” 1250 2000 2250 2500 2750 30001.5” 1250 2000 2500 2750 3000 30001.0” 1250 2000 2500 2750 3000 30000.5” 1500 2250 2500 2750 3000 30000” 1500 2250 2750 3000 3000 3000
1.02 CID
PULLEY φ 2 4 6 8 10 12
GEAR PITCH φ 1 2 3 4 5 6
Y Dimension2.0” 1750 2500 3000 3000 3000 30001.5” 1750 2750 3000 3000 3000 30001.0” 2000 2750 3000 3000 3000 30000.5” 2000 3000 3000 3000 3000 30000” 2250 3000 3000 3000 3000 3000
.84 CID
20 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 PumpSide-LoadApplications
Maximum AllowableOperating Pressures
Y
Pitch Dia.
Ideal positions shown. Side load is acceptablewithin 90° of either side ofthe ideal position. Chartsare based on 100% slackside tension. Max. speedper catalog. Max. operatingpressure shown.
PULLEY φ 2 4 6 8 10 12
GEAR PITCH φ 1 2 3 4 5 6
Y Dimension2.0” N/R 1500 2000 2250 2250 25001.5” N/R 1500 2000 2250 2500 25001.0” N/R 1750 2000 2250 2500 25000.5” 1250 1750 2250 2250 2500 27500” 1250 1750 2250 2500 2750 3000
1.20 CID
PULLEY φ 2 4 6 8 10 12
GEAR PITCH φ 1 2 3 4 5 6
Y Dimension2.0” N/R 1250 1750 2000 2000 22501.5” N/R 1250 1750 2000 2000 22501.0” N/R 1500 1750 2000 2250 22500.5” N/R 1500 1750 2000 2250 22500” N/R 1500 1750 2000 2250 2500
1.37 CID
PULLEY φ 2 4 6 8 10 12
GEAR PITCH φ 1 2 3 4 5 6
Y Dimension2.0” N/R N/R 1250 1500 1500 17501.5” N/R N/R 1250 1500 1500 17501.0” N/R N/R 1250 1500 1750 17500.5” N/R 1250 1250 1500 1750 17500” N/R 1250 1500 1750 1750 2000
1.69 CID
PULLEY φ 2 4 6 8 10 12
GEAR PITCH φ 1 2 3 4 5 6
Y Dimension2.0” N/R N/R N/R 1250 1500 15001.5” N/R N/R 1250 1250 1500 15001.0” N/R N/R 1250 1250 1500 15000.5” N/R N/R 1250 1500 1500 17500” N/R N/R 1250 1500 1750 1750
1.77/1.87 CID
PULLEY φ 2 4 6 8 10 12
GEAR PITCH φ 1 2 3 4 5 6
Y Dimension2.0” N/R N/R 1250 1500 1750 20001.5” N/R 1250 1500 1750 1750 20001.0” N/R 1250 1500 1750 2000 20000.5” N/R 1250 1500 1750 2000 20000” N/R 1500 1750 2000 2000 2250
1.48/1.54 CID
21EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
The Load SensingPriorityValve is used withthe open loop load sensesystemsthat are typicallyused in steering and brakingcircuits. The load sense gearpump provides metered pri-orityflow (CF)on demand.
The excess flow (EF)is avail-able for auxiliary circuits.Theresponse time was select-edto insure that the operatorwill not sense a delay orsteering “kick”during tran-sient conditions.
Series 26 PumpLoad SensingPriority Valve
VALVE SPECIFICATIONS
Rated Pressure 207 BAR (3000PSI)Rated Inlet Flow 108 L/m (28GPM)Maximum Controlled Flow (CF) 33 L/m(8.5 GPM)Bias Pressure Dynamic - 10 bar (150 PSI) Std.
Static - 6.9 bar (100 PSI) Std.Relief Pressure 34.5-207 bar (500-3000 PSI)Response Time 70 msec. max. (std. bias spring)CF Flow Variation over full pressure range +/- 10%
PUMP SPECIFICATIONS
Displacements 9 Available: 8.2cm3/r [.50 in3/r] thru 30.6 cm3/r [1.87in3/r]Mounting SAE 2-Bolt A Mount
SAE 2-Bolt B Mount4-Bolt European Mount (80mm Pilot)
Ports Side or RearType Single or Multiple Configuration
22 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 MotorGeneralSpecifications
Displacement cm3/r [in3/r] 7,0 8,8 10,1 11,6 14,5 17,3 20,3[.43] [.54] [.62] [.71] [.88] [1.06] [1.24]
Max. Intermittent Pressure bar [PSI] 241 241 241 241 241 241 241[3495] [3495] [3495] [3495] [3495] [3495] [3495]
Rated Speed (RPM) 3600 3600 3600 3600 3600 3200 3200Minimum Output Flow at Continuous 22,2 27,9 32,0 36,7 48,0 50,9 59,8Rated Speed and Pressure LPM [GPM] [5.9] [7.4] [8.5] [9.7] [12.7] [13.5] [15.8]Input Power at Intermittent Rated 11,9 15,0 17,2 19,7 24,7 26,2 30,7Speed and Pressure kW [HP] [16.0] [20.1] [23.0] [26.5] [33.1] [35.1] [41.2]
Displacement cm3/r [in3/r] 23,1 25,2 26,0 28,8 30,3 31,7[1.41] [1.54] [1.59] [1.76] [1.85] [1.93]
Max. Intermittent Pressure bar [PSI] 241 241 241 241 234 224[3495] [3495] [3495] [3495] [3393] [3248]
Rated Speed (RPM) 3000 3000 3000 3000 3000 3000Minimum Output Flow at Continuous 63,8 69,6 71,8 79,5 83,6 87,5Rated Speed and Pressure LPM [GPM] [16.8] [18.4] [19.0] [21.0] [22.1] [23.1]Input Power at Intermittent Rated 32,8 35,7 36,9 40,8 41,7 41,8Speed and Pressure kW [HP] [43.9] [47.9] [49.4] [54.8] [55.9] [56.0]
The performance data in the table above and the following graphs was collected using a mineral base oil with a viscosity of 133 SUS at 49°C [120°F].
Rotation Bi-RotationMounting Flange SAE A 2 BoltMax. Continuous Pressure† 210 bar [3000 PSI]*Max. Intermittent Pressure†† 240 bar [3500 PSI]**Minimum Speed at Continuous Pressure 750 RPMMaximum Rotating Torque at 0 Pressure 4 Nm [36 lb-in]Maximum Continuous Operating Temperature 105°C [220°F]Minimum Continuous Oil Viscocity 5.7 cSt [45 SUS]Minimum Operating Temperature -29°C [-20°F]Maximum Inlet Vacuum at Operating Condition 0,8 bar Abs. [11.6 psi Abs.]Maximum Thrust Load 50 lbs.Maximum Seal Pressure 150 PSI, 200 PSI @ 1500 RPM
† Continuous - motor may be run continuously at these ratings.
†† Intermittent - intermittent operation, 10% of every minute.
* 31.8 cm3/rev. [1.94 in3/rev.] displacement max. continuous pressure is 190 bar [2750 PSI].
** 31.8 cm3/rev. [1.94 in3/rev.] displacement max. intermittent pressure is 224 bar [3250 PSI].
For side load limits consult your Eaton representative.
Ordering Information
Catalog Assemblies CrossReference
Standard catalog assemblies arebuilt from high production partsand are the most economicalpump assemblies available in thisseries. The standard assembly
order number is a preassignedpart number and may be used toorder the specific standardassembly (see page 24).
23EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 MotorPerformance Data
92,5 [3.64]46,2
[1.82]
21,1 [.83]
Driveshaft
42,2 [1.66]
Work PortWork Port(optional)
Case Drain Port - Bottom(Plugged for Internal Drain Option)
WorkPort
Work Port(optional)
72,0[2.83]
WorkPort
Work Port(optional)
35,7[1.41]
Case Drain Port - Top(Plugged for Internal Drain Option)
Driveshaft
Work Port
Work Port(optional)
92,5 [3.64]46,2
[1.82]
21,1 [.83]42,2 [1.66]
18 [.71]
Dim D Max2X Dim C
2X Dim A
14,2[.56]
For shaft configuration, seeseparate shaft drawing.
For front mounting configuration, see separate front mounting drawing.
Dim B
Bottom Drain
Top Drain
FRONT MOUNT: 2 BOLT SAE A AND BDISPLACEMENT DIM A DIM B DIM C DIM D
cm3/r [in3/r] mm [in] mm [in] mm [in] mm [in]7.0 [.43] 69.2 [2.72] 67.9 [2.67] 89.0 [3.50] 96.6 [3.80]8.8 [.54] 71.1 [2.80] 69.8 [2.75] 90.9 [3.58] 98.5 [3.88]10.2 [.62] 72.6 [2.86] 71.3 [2.81] 92.4 [3.64] 100.0 [3.94]11.6 [.71] 74.3 [2.93] 73.0 [2.88] 94.1 [3.71] 101.7 [4.01]12.5 [.76] 75.2 [2.96] 74.0 [2.91] 95.1 [3.74] 102.7 [4.04]14.6 [.89] 77.5 [3.05] 76.2 [3.00] 97.3 [3.83] 104.9 [4.13]17.4 [1.06] 80.7 [3.18] 79.4 [3.13] 100.5 [3.96] 108.1 [4.26]20.3 [1.24] 83.9 [3.30] 82.6 [3.25] 103.7 [4.08] 111.3 [4.38]23.1 [1.41] 87.1 [3.43] 85.8 [3.38] 106.9 [4.21] 114.5 [4.51]26.1 [1.59] 90.3 [3.56] 89.0 [3.51] 110.1 [4.34] 117.7 [4.64]28.8 [1.76] 93.5 [3.68] 92.2 [3.63] 113.3 [4.46] 120.9 [4.76]31.8 [1.94] 96.7 [3.81] 95.4 [3.76] 116.5 [4.59] 124.1 [4.89]
24 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series 26 MotorModel Code -Single
ADM * * ** ** A 00 00 0 00 0 00 00 0 A
1, 2, 3 6, 7 8, 94 5 18 242310 15
All dimensions are in inches.
26 Series
ADM – Gear Motor
Unit Type
A – Plain
Output Rotation
D – Bi-DirectionalL – Left-hand Rotation CCWR – Right-hand Rotation CW
Displacement
(cm3/r [in3/r])
01 = 7.0 [.43]02 = 8.8 [.54]03 = 10.2 [.62]04 = 11.6 [.71]05 = 14.6 [.89]06 = 17.4 [1.06]07 = 20.3 [1.24]08 = 23.1 [1.41]09 = 25.2 [1.54]10 = 26.1 [1.59]11 = 28.8 [1.76]12 = 30.3 [1.85]13 = 31.8 [1.94]
Output Shaft
AA = 9 Tooth Spline 16/32Spline, Min. Full Spline 22.4[.88], Shaft Extension 31.8[1.25]
AB = 11 Tooth Spline 16/32Spline, Min. Full Spline 22.4[.88], Shaft Extension 31.8[1.25]
AC = Straight Shaft Dia 19.05[.750], Keyway 4.8 x 25.4 [.19x 1.00], Shaft Extension 31.8[1.25] (Key Included)
AD = Straight Shaft Dia 15.88[.625], Keyway 4.1 x 18.3 [.16x .72], Shaft Extension 31.8[1.25] (Key Included)
AJ = Dia 15.88 [.625], Taper.125:1, .500-20 UNF-2A,Keyway 4.1 x 17.5 [.16 x .69],Shaft Extension 43.7 [1.72](Key Included)
Mounting Features
A = 2-Bolt A - SAE FlangeSeries 82-2
Ports, Sizes and
Location- Backplate
01 = Inlet Port 1.0625-12 UN-2B SAE O-Ring Port;Outlet Port 1.0625-12 UN-2BSAE O-Ring Port - Side Ports
02 = Inlet Port 1.0625-12 UN-2B SAE O-Ring Port;Outlet Port 1.0625-12 UN-2BSAE O-Ring Port - Rear Ports
03 = Inlet Port .875-14 UN-2B SAE O-Ring Port;Outlet Port .875-14 UN-2BSAE O-Ring Port - Side Ports
04 = Inlet Port .875-14 UN-2B SAE O-Ring Port;Outlet Port .875-14 UN-2BSAE O-Ring Port - Rear Ports
Case Drain
00 = No Case Drain
AA = .5625-18 UNF-2B SAEO-Ring Port - Bottom
AB = .5625-18 UNF-2B SAEO-Ring Port - Top
AC = Internal with Bi-Directional Checks, .5625-18 UNF-2B SAE O-Ring Port - Plugged
AD = .5625-18 UNF-2B SAE O-Ring Port - Bottom-Plugged
AE = .5625-18 UNF-2B SAE O-Ring Port - Top-Plugged
Relief Valve Type
0 = No Relief Valve
C = Cross-over
Relief Valve Setting
bar [lbf/in2]
00 = No Relief Valve Setting
AA = 117.2 [1700]
AB = 141.3 [2050]
AC = 31.0 [450]
Test Data
0 - GenericA - Unit Specific (Used with Relief Valve)
Special Features
00 - No Special Features
Paint
00 - None0A - Primer per Spec 209-13A0B - Black per Spec 209-13B
Identification
0 - Standard
Design Code
A - A
1024
23
21, 22
18
16, 17
5
6, 7
19, 20
15
13, 14
11, 128, 9
4
1, 2, 3
11, 12 13, 14 16, 17 19, 20 21, 22
Series 26 Gear Motors canbe ordered by using the fol-lowing Model Code.
A twenty-four digit codingsystem has been designedto identify the featurespresently available on singlegear pumps. The charactersand their relative positions
within the code identify spe-cific features.
Use the Model Code Matrixas an aid when assemblingthe model code for thepump with the features youdesire. It may be helpful tophotocopy the matrix and
write the numbers and let-ters into the boxes as youselect features.
All twenty-four digits of thecode must be submittedwhen ordering.
25EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series L2 PumpGeneralSpecificationsand PerformanceData
MODEL 25500 25501 25502 25503 25504 25505 25506 25507 25508
Displacement cm3/r [in3/r] 21.3 25.4 29.2 33.6 38.2 42.8 46.7 51.1 55.2[1.30] [1.55] [1.78] [2.05] [2.33] [2.61] [2.85] [3.12] [3.37]
Max. Continuous† Pressure bar [PSI] 248 248 248 248 248 248 224 207 190[3600] [3600] [3600] [3600] [3600] [3600] [3250] [3000] [2750]
Max. Intermittent†† Pressure bar [PSI] 276 276 276 276 276 276 252 234 217[4000] [4000] [4000] [4000] [4000] [4000] [3650] [3400] [3150]
Rated Speed (RPM) 3500 3000 3000 2750 2750 2500 2500 2500 2250Minimum Output Flow at 207 bar [3000 PSI] 61,3 64,7 78,0 83,3 94,6 96,1 105,2 115,1 112,0and Rated Speed LPM [GPM] [16.2] [17.1] [20.6] [22.0] [25.0] [25.4] [27.8] [30.4] [29.6]Input Power at 207 bar [3000 PSI] and 27.5 27.5 31.1 35.3 39.5 39.6 42.4 49.4 48.2Rated Speed and Cont. Pressure kW [HP] [36.9] [36.9] [41.7] [47.3] [53.0] [53.1] [56.8] [66.2] [64.7]
The performance data in the table above and the following graphs was collected using a mineral base oil with a viscosity of 133 SUS at 49° C [120° F]. The following performancegraphs are representative of the series.
† Continuous - pump may be run continuously at these ratings.
†† Intermittent - Intermittent operation, 10% of every minute.
Rotation CCW or CWMounting Flange SAE 2 Bolt BMaximum Continuous† Pressure 248 bar [3600 PSI]*Maximum Intermittent†† Pressure 276 bar [4000 PSI]**Minimum Speed at Continuous Pressure 750 RPMMaximum Continuous Inlet Temperature 107°C [225°F]Minimum Operating Temperature -29°C [-20°F]Maximum Inlet Vacuum at 82°C [180°F] and Rated Speed 6.0 In. Hg
† Continuous - pump may be run continuously at these ratings.
†† Intermittent - Intermittent operation, 10% of every minute.
For side load limits consult your Eaton representative.
* 46.7 [2.85] displacement maximum continuous pressure is 224 bar [3250 PSI]51.1 [3.12] displacement maximum continuous pressure is 207 bar [3000 PSI]55.2 [3.37] displacement maximum continuous pressure is 190 bar [2750 PSI]
** 46.7 [2.85] displacement maximum intermittent pressure is 252 bar [3650 PSI]51.1 [3.12] displacement maximum intermittent pressure is 234 bar [3400 PSI]55.2 [3.37] displacement maximum intermittent pressure is 217 bar [3150 PSI]
Ordering Information
Standard Catalog Assemblies
Standard Catalog Assemblies arebuilt from high quality productionparts and are the most economi-cal pumps available in this series.Dimensions and order numbersfor Standard Catalog Assembliesare given on pages 29-30.
Optional Configurations
Besides the Standard CatalogAssemblies, the L2 Series hasseveral optional features. Flowdivider and tandem backplatesare available. Multiple gearpumps can also be built. If a vari-ation from the Standard CatalogAssemblies is required, use themodel codes on pages 35-36.
26 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series L2 PumpPerformance DataCharts
Output Flow vs Speed
4
0
30 [8]
60 [16]
90 [24]
120 [32]
3500 3000 2500 2000 1500 1000 500 750
Input Speed (RPM)
21.3 [1.30]
25.4 [1.55] 29.2 [1.78]
33.6 [2.05] 38.2 [2.33]
42.8 [2.61] 46.7 [2.85]
51.1 [3.12] 55.2 [3.37]
21.3 [1.30]
25.4 [1.55] 29.2 [1.78]
33.6 [2.05] 38.2 [2.33]
42.8 [2.61] 46.7 [2.85] 51.1 [3.12] 55.2 [3.37]
3500 3000 2500 2000 1500 1000 500 750 0
30 [8]
60 [16]
90 [24]
120 [32]
Displacement cm 3 /r [in 3 /r]
Out
put F
low
at
69 B
ar [
1000
PSI
]
(LPM
[GP
M]
Out
put F
low
at
207
Bar
[30
00 P
SI]
(LPM
[GP
M]
27EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series L2 PumpPerformance DataCharts
Input Power vs Speed
The performance data show in the graphs are representative of this series. Tests were performed per SAE specifications using mineral base oil with a viscosity of 133 SUS at 49° C [120° F].
0
10
[13]
20
[27]
30
[40]
40
[54]
50
[67]
21.3 [1.30]
25.4 [1.55]
29.2 [1.78] 33.6 [2.05] 38.2 [2.33]
42.8 [2.61] 46.7 [2.85]
51.1 [3.12] 55.2 [3.37]
3500 3000 2500 2000 1500 1000 500 750
Input Speed (RPM)
0
5 [7]
10 [13]
15 [20]
21.3 [1.30]
25.4 [1.55] 29.2 [1.78]
33.6 [2.05] 38.2 [2.33]
42.8 [2.61] 46.7 [2.85]
51.1 [3.12] 55.2 [3.37]
3500 3000 2500 2000 1500 1000 500 750
Input Speed (RPM)
Displacement cm 3 /r [in 3 /r]
Inpu
t Pow
er a
t 69
Bar
[10
00 P
SI]
(kW
[HP
])
Inpu
t Pow
er a
t 20
7 B
ar [
3000
PSI
] (k
W [
HP])
28 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series L2 PumpStandard CatalogAssemblies -Dimensions
All dimensions are in mm [in].
MODEL 25500 25501 25502 25503 25504 25505 25506 25507 25508
Displacement (cm3/r [in3/r]) 21.3 [1.30] 25.4 [1.55] 29.2 [1.78] 33.6 [2.05] 38.2 [2.33] 42.8 [2.61] 46.7 [2.85] 51.1 [3.12] 55.2 [3.37]Dimension A (mm [in.]) 84.8 [3.34] 88.2 [3.47] 91.7 [3.61] 95.1 [3.75] 98.6 [3.88] 102.0 [4.02] 105.3 [4.14] 109.0 [4.29] 112.4 [4.43]Dimension B (mm [in.]) 117.3 [4.62] 120.8 [4.75] 124.2 [4.89] 127.7 [5.03] 131.1 [5.16] 134.6 [5.30] 137.8 [5.42] 141.5 [5.57] 145.0 [5.71]
6
IN OU
T
59.9 [2.36]
146 [5.75]
177.8 [7.00]
104.4 [4.11]
2X Dia. 14.5 ± 0.13 [.572 ± .005]
81.8 †
[3.22] 75.4 †
[2.97]
SuctionPortSidePorting†
Left Hand Rotation Shown
27.7 [1.09]
27.7 [1.09]
See Shaft Drawing
Dim B 2X Dim A
Driveshaft Centerline
22.4 [.88]
Pressure PortSide Porting†
Dia. 101.57 ± 0.03 [3.999 ± .001]
17.5 [.69] 9.7
[.38] Pressure PortRear PortingSuction
Port Rear Porting
† For split flange porting subtract .8 [.03], available in side porting only
C
C
L
L
Dia. 22.222±0.003 [.8749±.0001
[.978±.004] 4.1 [.16]
[.97]
6.30 +0.05 -0.03
.248 +0.02 -0.01] [
24.9 [.98] 13 [.51] Min Full Spline
41 Tooth 48/96 DP 45° Involute Fillet Root Class 1 Side Fit Spline
13 Tooth 16/32 DP 30° Involute Flat Root Class 1 Side Fit Spline SAE J498b
41.1 [1.62]
7/8 Inch Straight Key
Maximum Input Torque††170 Nm [1500 lb-in]
* Multiple pump input torque limitations:The total torque for multiple pump displacements andpressure combinations cannot exceed the maximum input torque rating of the shaft. The proper formula isPressure times Displacement divided by 6.28.
7/8 Inch 13 Tooth Spline
Maximum Input Torque††209 Nm [1850 lb-in]
7/8 Inch 41 Tooth Spline
Maximum Input Torque††316 Nm [2800 lb-in]
29EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series L2 PumpOrder Numbers
RIGHT HAND LEFT HANDROTATION ROTATION PORT SAE PRESSURE SAE SUCTIONPRODUCT NO PRODUCT NO SHAFT LOCATION PORT SIZE PORT SIZE
Model 25500 – 21.3 cm3/r [1.30 in3/r] Displacement25500-RSA 25500-LSA 13 T Spline Side 1-1/16-12 1-5/8-1225500-RSB 25500-LSB 13 T Spline Rear 1-1/16-12 1-5/8-1225500-RSC 25500-LSC 7/8 Keyed Side 1-1/16-12 1-5/8-1225500-RSD 25500-LSD 7/8 Keyed Rear 1-1/16-12 1-5/8-1225500-RSE 25500-LSE 13 T Spline Side 3/4 Split Flange 1-1/4 Split Flange25500-RSF 25500-LSF 7/8 Keyed Side 3/4 Split Flange 1-1/4 Split FlangeModel 25501 – 25.4 cm3/r [1.55 in3/r] Displacement25501-RSA 25501-LSA 13 T Spline Side 1-1/16-12 1-5/8-1225501-RSB 25501-LSB 13 T Spline Rear 1-1/16-12 1-5/8-1225501-RSC 25501-LSC 7/8 Keyed Side 1-1/16-12 1-5/8-1225501-RSD 25501-LSD 7/8 Keyed Rear 1-1/16-12 1-5/8-1225501-RSE 25501-LSE 13 T Spline Side 3/4 Split Flange 1-1/4 Split Flange25501-RSF 25501-LSF 7/8 Keyed Side 3/4 Split Flange 1-1/4 Split FlangeModel 25502 – 29.2 cm3/r [1.78 in3/r] Displacement25502-RSA 25502-LSA 13 T Spline Side 1-1/16-12 1-5/8-1225502-RSB 25502-LSB 13 T Spline Rear 1-1/16-12 1-5/8-1225502-RSC 25502-LSC 7/8 Keyed Side 1-1/16-12 1-5/8-1225502-RSD 25502-LSD 7/8 Keyed Rear 1-1/16-12 1-5/8-1225502-RSE 25502-LSE 13 T Spline Side 3/4 Split Flange 1-1/4 Split Flange25502-RSF 25502-LSF 7/8 Keyed Side 3/4 Split Flange 1-1/4 Split FlangeModel 25503 – 33.6 cm3/r [2.05 in3/r] Displacement25503-RSA 25503-LSA 13 T Spline Side 1-1/16-12 1-5/8-1225503-RSB 25503-LSB 13 T Spline Rear 1-1/16-12 1-5/8-1225503-RSC 25503-LSC 7/8 Keyed Side 1-1/16-12 1-5/8-1225503-RSD 25503-LSD 7/8 Keyed Rear 1-1/16-12 1-5/8-1225503-RSE 25503-LSE 13 T Spline Side 3/4 Split Flange 1-1/4 Split Flange25503-RSF 25503-LSF 7/8 Keyed Side 3/4 Split Flange 1-1/4 Split FlangeModel 25504 – 38.2 cm3/r [2.33 in3/r] Displacement25504-RSA 25504-LSA 13 T Spline Side 1-1/16-12 1-5/8-1225504-RSB 25504-LSB 13 T Spline Rear 1-1/16-12 1-5/8-1225504-RSC 25504-LSC 7/8 Keyed Side 1-1/16-12 1-5/8-1225504-RSD 25504-LSD 7/8 Keyed Rear 1-1/16-12 1-5/8-1225504-RSE 25504-LSE 13 T Spline Side 3/4 Split Flange 1-1/4 Split Flange25504-RSF 25504-LSF 7/8 Keyed Side 3/4 Split Flange 1-1/4 Split Flange
30 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series L2 PumpOrder Numbers
RIGHT HAND LEFT HANDROTATION ROTATION PORT SAE PRESSURE SAE SUCTIONPRODUCT NO PRODUCT NO SHAFT LOCATION PORT SIZE PORT SIZE
Model 25505 – 42.8 cm3/r [2.61 in3/r] Displacement25505-RSA 25505-LSA 13 T Spline Side 1-1/16-12 1-5/8-1225505-RSB 25505-LSB 13 T Spline Rear 1-1/16-12 1-5/8-1225505-RSC 25505-LSC 7/8 Keyed Side 1-1/16-12 1-5/8-1225505-RSD 25505-LSD 7/8 Keyed Rear 1-1/16-12 1-5/8-1225505-RSE 25505-LSE 13 T Spline Side 3/4 Split Flange 1-1/4 Split Flange25505-RSF 25505-LSF 7/8 Keyed Side 3/4 Split Flange 1-1/4 Split FlangeModel 25506 – 46.7 cm3/r [2.85 in3/r] Displacement25506-RSA 25506-LSA 13 T Spline Side 1-1/16-12 1-5/8-1225506-RSB 25506-LSB 13 T Spline Rear 1-1/16-12 1-5/8-1225506-RSC 25506-LSC 7/8 Keyed Side 1-1/16-12 1-5/8-1225506-RSD 25506-LSD 7/8 Keyed Rear 1-1/16-12 1-5/8-1225506-RSE 25506-LSE 13 T Spline Side 3/4 Split Flange 1-1/4 Split Flange25506-RSF 25506-LSF 7/8 Keyed Side 3/4 Split Flange 1-1/4 Split FlangeModel 25507 – 51.1 cm3/r [3.12 in3/r] Displacement25507-RSA 25507-LSA 13 T Spline Side 1-1/16-12 1-5/8-1225507-RSB 25507-LSB 13 T Spline Rear 1-1/16-12 1-5/8-1225507-RSC 25507-LSC 7/8 Keyed Side 1-1/16-12 1-5/8-1225507-RSD 25507-LSD 7/8 Keyed Rear 1-1/16-12 1-5/8-1225507-RSE 25507-LSE 13 T Spline Side 3/4 Split Flange 1-1/4 Split Flange25507-RSF 25507-LSF 7/8 Keyed Side 3/4 Split Flange 1-1/4 Split FlangeModel 25508 – 55.2 cm3/r [3.37 in3/r] Displacement25508-RSA 25508-LSA 13 T Spline Side 1-1/16-12 1-5/8-1225508-RSB 25508-LSB 13 T Spline Rear 1-1/16-12 1-5/8-1225508-RSC 25508-LSC 7/8 Keyed Side 1-1/16-12 1-5/8-1225508-RSD 25508-LSD 7/8 Keyed Rear 1-1/16-12 1-5/8-1225508-RSE 25508-LSE 13 T Spline Side 3/4 Split Flange 1-1/4 Split Flange25508-RSF 25508-LSF 7/8 Keyed Side 3/4 Split Flange 1-1/4 Split Flange
31EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series L2 PumpOptionalConfigurations
The L2 Series gear pumpcomponents can be assem-bled into many optional con-figurations. The versatiledesign allows you to assem-ble a pump to meet yourspecific needs.
Model codes for single andmultiple pumps along withthe component part dimen-sion drawings are given onthe following pages.
1 0
Single Gear Pump withSpilt- Flange Ports
Double Gear Pump withCommon Suction Port
Single Gear Pumpwith Flow Divider
Double Gear Pumpwith Flow Divider
Single Gear Pump with SAEA Flange Auxiliary Mount
Triple Gear Pump with Two SuctionPorts and SAE A Flange Auxiliary Mount
1 0
Triple Gear Pump withTwo Suction Ports
Triple Gear Pumpwith Flow Divider
Double Gear Pump with Common SuctionPort and SAE A Flange Auxiliary Mount
1 0
Double Gear Pump withCommon Suction Port
Double Gear Pumpwith Flow Divider
32 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series L2 PumpComponent Parts -Dimensions
Front Plate
SAE 2 Bolt B Mount.
Used on all StandardCatalog Assemblies.
Body
Used on Single andMultiple Pumps
Backplate
Used on Single andMultiple Pumps
Dim A
57.2 [2.36]
146 [5.75]
177.8 [7.00]
99.5 [3.92]
2X Dia. 14.5±0.13 [.572±.005]
40.1 [1.58]
Dia. 101.57±0.03 [3.999±.001]
17.5 [.69] 9.7
[.38]
I N OUT
81.8 †
[3.22] 75.4 †
[2.97]
SuctionPortSidePorting†
Left Hand Rotation Shown
27.7 [1.09]
27.7 [1.09]
25.1 [.99]
57.7 [2.27]
22.4 [.88]
Pressure PortSide Porting†
Pressure PortRear PortingSuction
Port Rear Porting
† For split flange porting subtract .8 [.03], available in side porting only
Drive Shaft L C
L C
L C
Displacement Dimension Acm3/r [in3/r] mm [in.]21.3 [1.30] 19.8 [.78]25.4 [1.55] 23.1 [.91]29.2 [1.78] 26.7 [1.05]33.6 [2.05] 30.0 [1.18]38.2 [2.33] 1.32 [33.5]42.8 [2.61] 37.1 [1.46]46.7 [2.85] 1.59 [40.4]51.1 [3.12] 43.9 [1.73]55.2 [3.37] 47.5 [1.87]
All dimensions are in mm [in].
33EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Flow Divider Backplate
Used on Single and Multiple Pumps
Series L2 PumpComponent Parts -Dimensions
All dimensions are in mm [in].
L C
76.5 [3.01] Max.
21.3 [.84]
Priority PressurePort Rear Porting
SecondaryPressurePort RearPorting
46.2 [1.82]
1.5 [.06]
101.1 [3.98]
Suction Port Side Porting
22.4 [.88]
65 [2.56]
68.3 [2.69]
52.1 [2.05]
80.3 [3.16]
Left Hand Rotation Shown
1.5 [.06]
Drive Shaft L C
93.5 [3.68]
25.4 [1.00]
29.5 [1.16]
SecondaryPressurePort SidePorting
Priority Pressure Port Side Porting
Suction Port Rear Porting
Top View
80.0 [3.15]
Optional Hex Plug (No Relief Valve)
34 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Tandem Backplate withSAE 2 Bolt A Flange
Used on Single and Multiple Pumps
Adaptor Plate
Used on Multiple Pumps
Spacer
Used with 11 Tooth SplineOutput Shaft
Series L2 PumpComponent Parts -Dimensions
All dimensions are in mm [in].
2X 3/8-16 UNC-2B 23.8 [.94] Min. Full Thread Depth
See Model Code for Output Shaft Options
Pressure Port †
SuctionPort †
22.4 [.88]
86.9 †
[3.42]
106.4 [4.19]
24.9 [.98]
57.9 [2.28]
106.4 [4.19]
Drive Shaft L C
86.9 †
[3.42] L C
Right Hand Rotation Shown † For split flange porting subtract .8 [.03]
36.8 [1.45]
43.2 [1.70]
Suction Port †
Pressure Port †
Drive Shaft L C
22.4 [.88]
82.6 [3.25] L C
76.2 [3.00]
30.2 [1.19] 60.5
[2.38] Right Hand Rotation Shown
† For split flange porting subtract .8 [.03]
35EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series L2 PumpModel Code -Single
ABF * * ** ** ** ** ** * 0 00 00 0 0
1, 2, 3 6, 7 8, 9 10, 114 5 2322
All dimensions are in inches.
L2 Series
ABF – Gear Pump - Single Unit
Unit Type
A – PlainB – Flow Divider with/without
Relief Valve (Pos. 14-15)
Input Rotation (viewed
from input shaft end)
L – Left-hand Rotation CCWR – Right-hand Rotation CW
Displacement
(cm3/r [in3/r])
00 = 21.3 [1.30]01 = 25.4 [1.55]02 = 29.2 [1.78]03 = 33.6 [2.05]04 = 38.2 [2.33]05 = 42.8 [2.61]06 = 46.7 [2.85]07 = 51.1 [3.12]08 = 55.2 [3.37]
Input Shaft
AA = 7/8 Inch Dia. 13 ToothSpline 16/32 Pitch ShaftExtension 41.1 [1.62]
AB = 7/8 Inch Dia. StraightKeyed, Keyway 6.4 X 25.4 [.25X 1.00] Shaft Extension 41.1[1.62]
AD = 7/8 Inch Dia. 41 ToothSpline 48/96 Pitch ShaftExtension 24.9 [.98]
Ports, Sizes and
Location- Backplate
01 = 1 5/8-12 Suction; 1 1/16-12 Pressure SAE StraightThread O-ring Ports - Side
02 = 1 5/8-12 Suction; 1 1/16-12 Pressure SAE StraightThread O-ring Ports - Rear
03 = 1 1/4 Suction; 3/4Pressure Split Flange Ports -Side
04 = 1 5/8-12 Suction; 7/8-14Priority Pressure; 1 1/16-12Secondary Pressure SAEStraight Thread O-ring Ports -Side
05 = 1 5/8-12 Suction; 7/8-14Priority Pressure; 1 1/16-12Secondary Pressure SAEStraight Thread O-ring Ports -Rear
Priority Flow Divider
Setting (LPM [GPM])
00 = No Flow Setting
AA = 3.8 [1.00]
AB = 5.7 [1.50]
AC = 7.6 [2.00]
AD = 9.5 [2.50]
AE = 11.4 [3.00]
AF = 13.3 [3.50]
AG = 15.1 [4.00]
AH = 17.0 [4.50]
AJ = 18.9 [5.00]
AK = 20.8 [5.50]
AL = 22.7 [6.00]
AN = 26.5 [7.00]
AP = 30.3 [8.00]
AR = 34.1 [9.00]
AS = 37.8 [10.00]
Relief Valve Full Flow
Setting (bar [PSI])
00 = No Relief Valve Setting
AA = 34.5 [500]
AB = 51.7 [750]
AC = 68.9 [1000]
AD = 86.2 [1250]
AE = 103.4 [1500]
AF = 120.6 [1750]
AG = 137.9 [2000]
AH = 155.1 [2250]
AJ = 172.4 [2500]
AK = 189.6 [2750]
AL = 206.8 [3000]
Auxiliary Rear Mount
0 = None
B = 2 Bolt A SAE FlangeSeries 82-2 Output ShaftAccepts 9 Tooth Spline 16/32Pitch, Shaft Extension 31.8[1.25]
C = 2 Bolt A SAE FlangeSeries 82-2, With 11 Tooth16/32 Pitch External SplineOutput Shaft, 17.5 [.69]Minimum Full Spline,Requires Spacer and Couplerto Accept 31.8 [1.25] MatingShaft Extension
Test Data
0 - GenericA - Unit Specific (required for flow divider and relief valve options.)
Special Features
00 - No Special FeaturesAB - Viton Shaft Seal
Paint
00 - None0A - Red Primer0B - Black
Identification
0 - Standard
Design Code
A - A
14, 15
1623
22
20, 21
17
5
6, 7
18, 19
12, 13
10, 11
8, 9
4
1, 2, 3
12, 13 14, 15
L2 gear pumps can beordered by using the follow-ing Model Code.
A twenty-three digit codingsystem has been designed toidentify all of the features avail-able on L2 single gear pumps.The characters and their rela-tive positions within the codeidentify specific features.
Use the Model Code Matrixas an aid when assemblingthe model code for thepump with the features youdesire. It may be helpful tophotocopy the matrix andwrite the numbers and let-ters into the boxes as youselect features.
All twenty-three digits of thecode must be submittedwhen ordering. The sevenzeros at the end of themodel code are for factoryuse, be sure to includethem when ordering.
16 17 20, 2118, 19
36 EATON Gear Pumps and Motors E-PUGE-MC001-E1 March 2008
Series L2 PumpModel Code -Multiple
ABG * * ** ** ** ** * * ** ** ** * 00 00 0 A
1, 2, 3 6, 7 8, 9 10, 114 5 28
All dimensions are in inches.
L2 Series
ABG – Gear Pump - Multiple Unit
Unit Type
A – PlainB – Flow Divider with/without
Relief Valve (Pos. 20-21)
Input Rotation (viewed
from input shaft end)
L – Left-hand Rotation CCWR – Right-hand Rotation CW
Displacement
(cm3/r [in3/r])
00 = 21.3 [1.30]01 = 25.4 [1.55]02 = 29.2 [1.78]03 = 33.6 [2.05]04 = 38.2 [2.33]05 = 42.8 [2.61]06 = 46.7 [2.85]07 = 51.1 [3.12]08 = 55.2 [3.37]
Displacement of
Center Section (cm3/r [in3/r])
00 = 21.3 [1.30]01 = 25.4 [1.55]02 = 29.2 [1.78]03 = 33.6 [2.05]04 = 38.2 [2.33]05 = 42.8 [2.61]06 = 46.7 [2.85]07 = 51.1 [3.12]08 = 55.2 [3.37]99 = No Center Displacement
Displacement of Rear
Section (cm3/r [in3/r])
00 = 21.3 [1.30]01 = 25.4 [1.55]02 = 29.2 [1.78]03 = 33.6 [2.05]04 = 38.2 [2.33]05 = 42.8 [2.61]06 = 46.7 [2.85]07 = 51.1 [3.12]08 = 55.2 [3.37]
Input Shaft
AA = 7/8 Inch Dia. 13 ToothSpline 16/32 Pitch ShaftExtension 41.1 [1.62]
AB = 7/8 Inch Dia. StraightKeyed, Keyway 6.4 X 25.4 [.25X 1.00] Shaft Extension 41.1[1.62]
AE = 7/8 Inch Dia. 41 ToothSpline 48/96 Pitch ShaftExtension 24.9 [.98]
Front Adaptor Ports
1 = 1 5/8-12 Suction; 1 1/16-12 Pressure – SAE StraightThread O-ring Ports3 = 1 1/4 Suction; 3/4Pressure Split Flange Ports,Common Suction
Rear Adaptor Ports
(triple pumps)
0 = No Rear Adaptor1 = 1 5/8-12 Suction; 1 1/16-12 Pressure – SAE StraightThread O-ring Ports3 = 1 1/4 Suction; 3/4Pressure Split Flange Ports,Common Suction
Ports, Sizes and
Location- Backplate
03 = 1 5/8-12 Suction; 1 1/16-12 Pressure SAE StraightThread O-ring Ports - Rear
05 = 1 5/8-12 Suction; 7/8-14Priority Pressure; 1 1/16-12Secondary Pressure SAEStraight Thread O-ring Ports -Side
06 = 1 5/8-12 Suction; 7/8-14Priority Pressure; 1 1/16-12Secondary Pressure SAEStraight Thread O-ring Ports -Rear
07 = 1 5/8-12 Suction(Plugged); 1 1/16-12 PressureSAE Straight Thread O-ringPorts - Rear
08 = 1 1/4 Suction; 3/4Pressure Split Flange Ports -Side
Priority Flow Divider
Setting (LPM [GPM])
00 = No Flow Setting
AA = 3.8 [1.00]
AB = 5.7 [1.50]
AC = 7.6 [2.00]
AD = 9.5 [2.50]
AE = 11.4 [3.00]
AF = 13.3 [3.50]
AG = 15.1 [4.00]
AH = 17.0 [4.50]
AJ = 18.9 [5.00]
AK = 20.8 [5.50]
AL = 22.7 [6.00]
AN = 26.5 [7.00]
AP = 30.3 [8.00]
AR = 34.1 [9.00]
AS = 37.8 [10.00]
Relief Valve Full Flow
Setting (bar [PSI])
00 = No Relief Valve Setting
AA = 34.5 [500]
AB = 51.7 [750]
AC = 68.9 [1000]
AD = 86.2 [1250]
AE = 103.4 [1500]
AF = 120.6 [1750]
AG = 137.9 [2000]
AH = 155.1 [2250]
AJ = 172.4 [2500]
AK = 189.6 [2750]
AL = 206.8 [3000]
Test Data
0 - GenericA - Unit Specific (required for flow divider and relief valve options.)
Special Features
00 - No Special FeaturesAA - Viton Shaft SealAE = 2 Bolt A SAE FlangeSeries 82-2 Output ShaftAccepts 9 Tooth Spline 16/32Pitch, Shaft Extension 31.8[1.25]
AF = 2 Bolt A SAE FlangeSeries 82-2, With 11 Tooth16/32 Pitch External SplineOutput Shaft, 17.5 [.69]Minimum Full Spline,Requires Spacer and Couplerto Accept 31.8 [1.25] MatingShaft Extension
Paint
00 - None0A - Red Primer0B - Black
Identification
0 - Standard
Design Code
A - A
15
14
10, 11
8, 9
20, 2128
27
25, 26
22
5
6, 7
23, 24
18, 19
16, 17
12, 13
4
1, 2, 3
12, 13 16, 17 18, 19 20, 21
Multiple L2 gear pumps canbe ordered by using the fol-lowing Model Code.A twenty-eight digit codingsystem has been designedto identify all of the featuresavailable on L2 double andtriple gear pumps. The char-acters and their relativepositions within the codeidentify specific features.
Use the Model Code Matrixas an aid when assemblingthe model code for thepump with the features youdesire. It may be helpful tophotocopy the matrix andwrite the numbers and let-ters into the boxes as youselect features.
All twenty-eight digits of thecode must be submittedwhen ordering. The six zerosat the end of the modelcode are for factory use, besure to include them whenordering.
22 23, 2414 15 2725, 26
© 2008 Eaton CorporationAll Rights Reserved Printed in USADocument No. E-PUGE-MC001-E1Supersedes E-PUGE-MC001-EMarch 2008
EatonHydraulics Operations USA14615 Lone Oak RoadEden Prairie, MN 55344USATel: 952-937-9800Fax: 952-294-7722www.hydraulics.eaton.com
EatonHydraulics Operations EuropeRoute de la Longeraie 71110 MorgesSwitzerlandTel: +41 (0) 21 811 4600Fax: +41 (0) 21 811 4601
EatonHydraulics Operations Asia Pacific 11th Floor Hong Kong New World Tower 300 Huaihai Zhong Road Shanghai 200021 China Tel: 86-21-6387-9988 Fax: 86-21-6335-3912