BMW G|F650GS|Dakar | Sertao special parts F650GS / G650GS 548 549 Headlight Protector Makrolon / Stainless Steel with Quick Release Fastener BMW G 650 GS Our headlight protector has

www.touratech.de/bmwg650x

BMW G|F650GS|Dakar | Sertao

special parts

1

2

3

4

5

6

7

Engine guard|Cylinder protection|fairing from page 556

Tank bag from page 570

Handlebar|Cockpit|Windscreens|Lighting from page 550

Seat from page 568

Pannier systems from page 572

Foot pegs/hand gear from page 560

Suspension from page 566

www.touratech.de/bmwg650x

1

2

3

4

5

6

7

special parts

- Pic.: Guido Bergmann | Morocco

549548

Andreas Prinz / America

Windscreen Adjusterfor Original WindscreenBMW G 650 GSThe search is over for a windscreen that works!Windscreens are like seats: a whole lot of different factors influence your personal requirements for the product. Your height, the type of helmet you wear, even your seating position – they all determine whether a windscreen works or not.Discover for yourself what best suits your individual needs with our infinitely variable windscreen adjuster. And best of all, you can keep using your bike’s original screen.The windscreen adjuster for the BMW G 650 GS is fully compatible with our GPS mounting adapter above instruments (300-5415).

300-5330

GPS Mounting Adapter above InstrumentsBMW G 650 GSSuccessful rally racers show us how it’s done: they fit their instruments in the central field of vision.And what works for rallies is also a perfect solution for everyday use!Our “mounting adapter above instruments” lets you keep your GPS device or road book firmly in view. No more looking down or distractions to the side – your eyes are always pointed at the road.The mounting plate attaches neatly to the existing mounting points behind the windscreen on the BMW G 650 GS. No drilling or laborious modifications required! Nearly all Touratech GPS mounts can be easily fitted to the mounting adapter’s 12 mm centre strut.

300-5415

BMW F650GS / G650GS549548

Headlight Protector Makrolon / Stainless Steel with Quick Release FastenerBMW G 650 GSOur headlight protector has been thoroughly tried and tested over the years – we’ve sold thousands. Even the biggest stones won’t be able to damage your headlight with this! New durable stainless steel model now available with quick release fastener! Now you can clip on the headlight protector and detach it again as needed. Just bolt the sturdy and secure side struts to the indicator mounting points.And, of course, the protector comes with everything you need to fit it. This headlight protector has been developed for off road use and is not street legal.300-5090: The Makrolon pane is shatter-proof and virtually indestructible!

300-5090 Makrolon300-5095 Stainless steel

Xenon Headlight BMW F / G 650 GSState-of-the-art lighting technology for your F / G 650 GS. Very bright Xenon light for considerably safer driving at night. The Xenon light is activated by the high beam. Compared to the Xenon, the contribution of the original beam is barely noticeable. The 20,000 volt transformer uses only 25W to produce double the light. Includes German TÜV Type Approval, special brackets for the light and for the transformer, complete fitting hardware and fitting instructions.

040-1504 (left side) F 650 GS300-5480 (left side) G 650 GS

Fog Headlight BMW F / G 650 GS

The fog headlight can be fitted as a single light, or in a pair. The wide, low fog beam of the 55 W halogen allows much safer driving when it is raining or snowing. The fog light housing matches our Xenon headlight. The headlights include a German TÜV Type Approval and need not be registered.

Fog headlight right040-2004 F 650 GS300-5476 G 650 GS

Fog headlight left040-3004 F 650 GS300-5475 G 650 GS

551550

PART

PART

TOUR

ATECH

TOUR

ATECH

NEW

Steel Headlight Protector BMW F 650 GSThis very sturdy protector for the expensive glassheadlight can withstand even large stones. Steelgrating and welded frame is plastic-powder coatedgloss black. Mounting is very simple using fasteningpoints directly at the indicator mounts. No effect onthe function of the windscreen. The headlightprotector does not have German TÜV-type approvaland was developed for off-road use.300-0150 (up to 2003)300-0151 (from 2004 on)

LED Rear LightF 650 GS / DAKAR / Rallye /Oryx / TT 39 / TB11XX ReVampBMW G 650 GS / SertaoWhite rear light with LED’s that will last forever. Looks great, can be installed quickly and includes approval (does not need to be registered). The LED rear light gives your motorbike a totally new and modern look. In addition, you no longer need to constantly worry about defective rear light bulbs and getting involved in an accident because of this. Increased safety combined with modern technology and good looks - what else could you want?040-0050

Mini Blinker Set F 650 GS/DakarWhen you always damage your indicator when riding offroad, then have a look at this: Mini indicators Come supplied with detailed instructions: The originalholes must be enlarged to mount these indicators.- Flexible mounting- Bulbs included.- One set contains 4 indicators040-0209

Headlight protector for Touratech fog headlight and Xenon headlight; anodised black aluminium

Robust enough to protect against flying stones - filigree enough not to impair the lighting intensity!

040-5468 ( per piece)

BMW F650GS / G650GS551550

Cockpit Conversions BMW F 650 GS(also for DAKAR) up to 2003

Roadbook tours, short rallies or just another, more individual design, there are many reasons for our cockpit conversions. The conversion kit includes an adapter plate and all necessary screws to equip your F 650 GS with a motorcylce computer and a road-book holder.You can decide which IMO to mount: an IMO-100R50 Rallye (version 50), an IMO 100R or 100R300 (version 100).You will always need a sport control lamp kit and the RB-TT roadbook holder.Converting will take some time and you should be experienced.

Handlebar Risers F/G 650 GS

Adjusting your handlebars is an easy job that does not require any major modifications to your bike.Advantages of our handlebar risers:- Upright and relaxed riding position- Less strain on shoulders and wrists- Easier handling of the motorbike- Material: anodised aluminium- For sports bikes: better standing position, less tiring- All of our handlebar risers come supplied with all necessary screws.- Handlebar risers come supplied with a German TÜV type approval

040-0269 F 650 GS/Dakar till 2007300-5255 G 650 GS from 2011

Cockpit conversion040-4201 F 650 GS V50

Cockpit conversion040-4202 F 650 GS V100

Vehicles with ABS have to change the original brake line with our PTFE steel braided brake line (about 3 cm longer than the original one).

040-0338 F 650 GS / G 650 GS

553552

Touratech Hand Protectors GDwith Handlebar RisersBMW G 650 GS

These hand protectors are made of virtually inde-structible plastic; they are modern in design, offer a high level of protection, and can easily be fitted to the G 650 GS using the fitting sets (included). The hand protector can be combined with various spoilers and then offers optimum protection against wind and weather. A very strong, sturdy construction which has proven itself time and again in many ral-lies and on other motor cycles. - Many colours available - Includes special adapters and 34 mm handlebar

risers for fitting on the G 650 GS Vehicles with ABS have to change the original brakeline with our steel braided brake line (about 3 cm longer than the original one, 040-0338).Handlebar risers 34 mm: - For an upright and relaxed riding position - Less strain on shoulders and wrists - Better handling - Black plastic coating - German TÜV Type Approval

Hand Protectors GD with Handlebar Risers

300-5650 black300-5651 yellow300-5652 blue300-5653 red300-5654 white

Spoiler for Original BMW Hand ProtectorsBMW F 650 GS / G 650 GSOptimal hand protection for the original protectors. Very useful and pleasant in rain, snow, hail and cold. Easy to fix by drilling two small holes through the protector. The spoilers are made out of resistant and light synthetic. Very useful accessories for the GS-biker.

040-1711 black

Kaoko Cruise Control, Mechanical Cruise Control, BMW F/G 650 GS / Dakar (until 2007) / SertaoThe Cruise Control replaces the original handlebar end weights. The anti-slip knurled screw secures theaccelerator in position. This significantly reduces the strain on the right hand during long journeys. This item is illegal in road traffic in Germany and could be dangerous if used incorrectly. We are unable to accept any responsibility for it. Use at the owner’s/rider’s own risk.330-0003 F 650 GS/Dakar330-0002 for original BMW heated grips330-0024 G 650 GS/Sertao

BMW F650GS / G650GS553552

Fork Guard BMW F 650 GS/Dakar / G 650 GS/SertaoSpecially developed for the 650GS models and with the help of a dear customer, a fork guard for the front wheel forks. The guards are fitted on the top to the side of the fender cover with special clamps. The fork protectors are then held in position by guides that are also fitted to the lower cross stabiliser. If low mudguards are used these may have to be cut into a somewhat here. But this isn’t really a problem, especially with Touratech mudguards. But the decisiveadvantage of these fork guards is that unlike traditional rubber gaiter fork guards, these guards do not block cooling air to the radiators and also the cross section of air for the water cooler is not reduced.Unlike rubber gaiter fork boots, these gu-ards do not block cooling air to the radiators.

Mudguard BMW F/G 650GS/Dakar/SertaoAdditional mudguard. True protection from mud and water! With the standard version water sprays from the ground in front of the cockpit when it is raining ... covering the rider´s face with mud. This mudguard works very well! This mudguard is very effective when it comes to avoiding a cold and dirty shower. It is lightweight, easy to fit and it is hardly noticeable because of it´s black colour ... it’s perfect!

040-0235

Radiator GuardBMW F/G 650 GS/Dakar/SertaoEffective protection for the radiator. The guard consists of two anodised aluminium grills (for left and right sides of the radiator).300-0130

The seals and fork legs remain constantly visible, thus a leak or damage can be easily discovered. Mud is not trapped inside. No more hidden problem areas

300-0145 BMW F 650 GS/Dakar / G 650 GS/Sertao

555554

BMW F650GS / G650GS555554

Engine Guard AluminiumBMW F/G 650 GS/Dakar/SertaoOur aluminium engine guard did a sterling job on the predecessor model the F 650 GS, which was put to the test in the Paris-Dakar rally. We’ve specially adapted the engine guard for the new G 650 GS. The design incorporates 4 mm aluminium which is significantly sturdier than the original part and will protect the full length of the engine against bottoming out or impacts with solid objects off-road.300-5135

Engine Guard Extension, BMW F/G 650 GSThe engine guard extension on the G 650 GS also protects your machine against stones and coarse dirt. It closes the gap between the rear wheel and engine guard, and thus increases their efficiency considerably. We deliberately dispensed with recesses to prevent the risk of the motorbike becoming stuck on stones or branches. Fitting it to the main stand using collars with rubber seals is extremely effective at preven-ting the guard from rattling.300-5145

557556

Heel Protector, RightBMW F/G 650 GS/Dakar/SertaoA dual-function, two-component part! As well as protecting the brake cylinder and frame from the heel of your boot (and vice versa), the heel protector also guards these sensitive parts against stones or other hazards if the bike falls over when you’re riding off-road. Extremely solid yet light and sporty in design, it’s made from riveted stainless steel and aluminium.

300-5025

ABS Sensor ProtectionBMW G 650 GS/SertaoABS cannot function without information about the wheel speed. Proper protection for the sensitive wheel speed sensors is therefore essential, especially on machines that often travel on rough ground. The shapely guard made of 1.5 mm thick stainless steel protects the ABS sensor from coarse dirt and stones.

300-5005 front300-5010 rear

Engine Guard KitBMW F/G 650 GSThe engine guard extension and intermediate plate give optimum protection against stones protruding from the ground or bumps when riding off road. Both guard plates were deliberately manufactured with no holes to prevent the bike getting caught on stones or branches. The engine guard extension is fixed to the centre stand using 4 clamps with rubber inserts to prevent the plate from clattering. The engine guard intermediate plate is an effective extension to the existing engine guard and is fixed to the frame with two clamps.

Engine Guard Extension040-1253 BMW F/G 650 GS

Engine Guard Extension for Touratech centrestand040-1256 BMW F/G 650 GS/Dakar/Sertao

Engine Guard Intermediate040-1254 BMW F 650 GS/Dakar BMW G 650 GS/Sertao

BMW F650GS / G650GS557556

Crash Bars BMW F 650 GS/Dakar /BMW G 650 GS/SertaoExtremely rugged protection for your G / F 650 GS.Use these crashbars and even major falls will no longer be a horrifying experience. Help avoid expensive repairs.- Produced specifically for the G / F 650 GS- Quick and easy to fit- Made of high grade stainless steel

300-5160 Crash bar stainless steel for engine300-5161 Crash bar stainless steel for fairing

Engine and Fairing Crash BarsBMW F 650 GS/Dakar

Extremely rugged crashbars for your F 650 GS / Dakar. Use these crashbars and even major falls will no longer be a horrifying experience. Help avoid expensive repairs.

051-0523 engine crashbar051-0524 fairing crashbar (also for G 650 GS/Sertao)

Kick Stand Support ExtensionBMW F 650 GS/Dakar / G 650 GS SertaoThe F 650 GS Dakar stands much more firmly even on quite a soft surface with this kick stand support extension. Even if you park the motor bike in a meadow you do not always have to look for a small plank of wood or another base. This practical part is made of a combination of stainless steel laser parts and anodised aluminium. Quick and easy to fit.

300-0134

559558

Adjustable Gear Lever G 650 X/GSChallenge/Country/MotoThe adjustable gear lever is used to its bestadvantage with the adjustable foot rest or simplyif the position of the original gear lever is notsuitable.With this gear lever too the front leverhas a spring to enable it to fold thus reducingdamage should you fall off.In addition, the forcesacting on the gear lever will be transferred lessstrongly to the selector shaft. Should the foldinggear lever get a little bent out of shape it can bestraightened again very easily.049-0127

Side Stand Base Extension BMW G 650 GSLoose gravel, deep sand, hot tarmac, wet grass or even the forest floor – there are so many places where a parked motorbike might fall over. Well, not any more! The side stand base extension for the BMW G 650 GS doubles the surface area of the side stand base, so even heavily laden motorbikes will stay safely standing on soft ground.And not least, this neat little stainless steel and aluminium part gives a perfect finish to the side stand!

300-5275

Centre Stand BMW F 650 GS/Dakarand BMW G 650 GS/SertaoNow your F 650 GS Dakar will sit more securely on its stand. Easy chain maintenance. Safely load your BMW. The motorcycle can be easily put on its stand even when loaded. Easy to fit. High quality part from Touratech. Engine Guard Extension: 040-1256.

300-0135

Gear LeverBMW F 650 GS/Dakar / G 650 GS/SertaoBeautiful and lightweight folding aluminium gear lever, specially designed for the F 650 GS/Dakar / G 650 GS.

041-0702

Folding Brake LeverBMWF 650 GS/Dakar / G 650 GS/SertaoThe brake lever can break even if you just fall. This will make it very difficult, if not impossible, to go any further. With our brake lever you can reduce this risk easily and effectively because of the folding front lever. Should the brake lever get a little bent out of shape it can be straightened again very easily.

300-0126

BMW F650GS / G650GS559558

F 650 GS/Dakar / G 650 GS/Sertao Stand(also fits Rallye/Oryx/TT 39)All work on the motorbike can now be carried outusing one stand! No more tiresome messing aroundwhen carrying out maintenance or repair work. Tried and tested at the Arras-Dakar rally. Now available in stylish round tubing for your workshop or garage.

300-0140

Long-Distance Relocated Rear FootpegsBMW F 650 GS/Dakar / G 650 GS/SertaoWe have always wanted these footpegs for our long-distance journeys. Everyone knows the problem: If you are wearing enduro boots there is not enough space between them and the brake lever or gear lever. The long-distance footpegs are fitted further back thus providing optimum space for enduro boots. The wider foot base also allows longer distances to be covered comfortably while standing on the footpegs. Material: high-quality stainless steel.

041-0626

Long-Distance Relocated Front FootpegsBMW F 650 GS/Dakar / G 650 GS/SertaoFor anyone who wears touring boots on long journeys. The footpegs are fitting further forward thus providing optimum distance between the touring boots and the brake lever or gear lever. The wider foot base also allows longer distances to be covered comfortably while standing on the footpegs.Material: high-quality stainless steel.

041-0625

Height Adjustable FootpegsBMW F 650 GS/Dakar / G 650 GS/SertaoNow finally these extra-large, four way adjustablefootpegs enable you to position them according to your needs and to the driver’s body height. Especially on long-distance trips, the lowest position improves riding comfort considerably as it enables a relaxed riding position.

041-0631

Footpeg System / FootpegsBMW F 650 GS/Dakar / G 650 GS/SertaoVery rugged F/G 650 footpeg system, comfortable knee angle and extremely durable fitting. The Rally footpegs provide safer standing. We also fit this product to our Dakar motorcycles. Colour: white plastic coated, complete kit includes gear and brake levers.

300-0040 (kit)300-0041 (rally footpegs only)

561560

Chain TensionerF 650 GS / Dakar / G 650 GS/SertaoA durable replacement for the original chaintensioner stop plates. It is also possible to screw thechain tensioner to the swing arm so that parts can not fall off when working on the rear wheel.

051-1206

Chain Guide F 650G S/Dakar / G 650G S/SertaoIn extreme off-road conditions, or when the chain is loose or worn out, a chain guide becomes very important for the bike and for the safety of the rider. Prevent the chain from coming off, ever. Very important for long-distance travels where it may be required to use a very worn chain beyond normal service limits. Increases safety of the chain drive system by blocking entry of a foot or Hand into the sprocket in event of a crash. This doesn’t fit the original chain guard! It only fits the Touratech chain guard!051-1205

Steel Braided Brake Lines - PTFE steel braided brake lines - Better brake efficiency - More precise biting point - For front brake system of F 650 GS or Dakar - For rear brake system of both models - German TÜV type approval included - Includes seals - More robust, especially when used under the most demanding off-road conditions - Durable, hose protected against ultraviolet radiation

040-0332 Steel braided brake lines BMW F 650 GS/Dakar (2 cm longer than the original)040-0333 Steel braided brake lines BMW F 650 GS/Dakar (standard)040-0334 Steel braided brake lines BMW F 650 GS/Dakar rear040-0338 Steel braided brake lines BMW F 650 GS/Dakar with ABS (3 cm longer than the original)

*Works* long-distance foot pegs BMW R850GS/R11XXGS/ADV

• 52 mm wide and 4 mm thick stainless steel claw profile that is kind to your boots

• Perfect combination of grip and self-cleaning• With a more slender design for better ground

clearance• Significantly less susceptible to impacts• Strengthened mounting point• With a blasted surface and laser inscription for

a superior finish

044-5315 044-5316 (low - 2 cm)

BMW F650GS / G650GS561560

Brake StopBMW F 650 GS/Dakar / G 650 GS/Sertao

The brake stop (welded to the chassis) on your F 650 GS / G 650 GS can break off, even in a minor fall. Our additional stop avoids this effectively and you can also adjust your foot brake pedal.

300-0125

Locking Oil Filler CapBMW F 650 GS/Dakar (from 2000 onw.) BMW G 650 GS/SertaoIngenious and high quality - fantastic protection against foreign bodies in the oil circuit of your F / G 650 GS. Stolen oil filler caps are a thing of the past. No special tool required: easy to operate using a small unobtrusive key.- High-quality workmanship- High-quality brand lock- Can be keyed to match our integral pannier locks

300-0225

Oil Filler Cap with Hexagonal ScrewBMW F 650 GS/DakarBMW G 650 GS/SertaoValuable tamper protection for your F 650 GS / G 650 GS oil filler that requires an unusual 7mm hexagonal allen wrench for access. The perfectly machined cap is anodised aluminium of course, a 7mm Allen key is included and can be attached to your key ring.

300-0210

Oil Filler Cap for Torx 45BMW F 650 GS (from 2000 onw.) BMW G 650 GS / Sertao

Ingenious and high quality - fantastic protection against foreign bodies in the oil circuit of your F / G 650 GS. Made of aluminium, CNC turned (ano-dised) and with integral TORX to open it. The cap is simply used instead of the original plastic part and can then only be opened with a TORX 45 key. Thus it is difficult just to remove it but all the same a quick maintenance unit is no problem.300-0200

563562

Manifold Guard, FlexibleBMW F 650 GS/Dakar / G 650 GS/SertaoThis heat shield is made from laser-cut stainless steel. Thanks to the special construction, it can easily be adapted to any manifold shape. Not only does it provide heat protection, but it also protects the endangered points of the exhaust system against stone-chipping or in the event of a fall. Length: 28 cm; supplied with: 1 pce., including 2 collars.370-1538

Stainless Steel Heel GuardBMW F 650 GS from 2004 onw./DakarBMW G 650 GS/SertaoDurable heel guard made from V2A stainless steel.Protects your rear master cylinder from your moto-cross boots. Large holes for light weight and trick appearance.

044-0640

Rear Break Reservoir Cover BMW F 650 GS/Dakar / G 650 GS/SertaoThis beautiful looking, functional cover is simply screwed onto the existing mounting points. This ensures that it is no longer so easy for anyone to remove the brake fluid reservoir cover. It is still very easy to read the level in the reservoir. Made of laser-cut stainless steel.

620-0007

Manifold Heat Shield, Rear BMW F 650 GS/Dakar / G 650 GS/Sertao

Fit this manifold heat shield to stop your pillion’s trousers getting destroyed by the hot manifold pipes!It significantly adds to the functionality of the delicate tubework on the BMW G 650 GS, which provides good protection for the boots but not for the trouser legs above. Our stainless steel heat shield is incredibly easy to fit and puts a stop to singed trousers once and for all!300-5070

Chain GuardBMW G 650 GS / F 650 GS Our chain guard not only does its job to perfection, it also looks fantastic – the beauty is in the design! The actual chain cover is made from lightweight anodised aluminium, which is supported on indestructible 2 mm thick stainless steel. The chain guard easily fits onto the existing attachment points and is one more add-on that equips the G / F 650 GS for long-distance touring.

300-5045

BMW F650GS / G650GS563562

Chain Wheel with 49 Teeth, F 650 RallyChain wheel with 49 teeth, aluminium gold-anodised.310-0110

Chain Pinion with 15 Teeth, F 650 GS/Dakar/Rally / G 650 GS / SertaoChain pinion steel with 15 teeth.

330-0332Compared with the original ratio with 16 teeth at the front and 47 at the back, the ratio of 15 teeth at the front and 49 at the back has the effect of reducing the overall multiplication factor. As a result there is less wear on the clutch when you are going slowly.

Chain Guard / Wheel Sensor CoverBMW F 650 GS/Dakar / G 650 GS/SertaoThis lightweight chain guard and wheel sensor cover is lasercut from aluminium. Provides protection where needed while reducing unsprung weight. The original plastic chain guard and rear wheel cover is removed completely. The lightweight guard comes with all mounting hardware. Fitting is quick and easy. What you get: a stylish guard that protects the fuel injection speed sensor on one side and a lightweight and functional chain guard on the other side.300-0100

Rally Pinion Gear GuardBMW F 650 GS/Dakar / G 650 GS/SertaoThis Rally pinion guard was designed for the most demanding rally in the world. You know the problem if you had to repair a broken engine housing using cold metal. Even long stages on extreme trails, where the chain is being worn out almost completely, will no longer damage the engine housing.

300-0115

Sprocket CoverBMW F 650 GS/Dakar / G 650 GS/Sertao- Milled and soldered aluminium- Prevents mud build up- Lightweight- Robust- Looks nice

300-0110

Brake Cylinder Cover Aramid-CarbonBMW F 650 GS/Dakar / G 650 GS/SertaoThe rear brake cylinder of the F650GS / G650GS is not protected. Therefore it is very likely to be damaged during a fall and also gets dirty very quickly. When riding off- road, you can easily catch your boots. Our extremely durable brake cylinder cover made out of Kevlar/Carbon fibre protects the brake cylinder and your boots.300-0120 Carbon Aramid300-0121 Carbon fibre

565564

Shock GuardBMW F 650 GS/Dakar / G 650 GS/SertaoThis shock guard has been developed for the F 650 GS/Dakar and the G 650 GS. As a result the shock absorber rod with the sensitive sealing elements is protected from stones and mud being thrown up cons-tantly. The shock guard is screwed onto the lower shock absorber mounting and remains stable.

300-0147 F 650 GS/Dakar till 2007300-5545 G 650 GS/Sertao 2011 onw.

Progressive Fork Springs

These progressive fork springs are a perfect match for the fork springs on the BMW. They make the fork better suited to the demands of motorcycle touring. You will also experience a significantly improved response and greater reserves in extreme situations. The fork springs are made in Europe by Dutch sus-pension specialists Hyperpro.

040-7412 BMW F650GS Dakar

040-7435 BMW F650GS *2000-2007*

300-5837 BMW G650GS *from 2009*

300-5838 BMW G650GS Sertao *from 2011*

BMW F650GS / G650GS565564

Level 2

Touratech Suspension BMW F 650 GS Dakar / G 650 GS/SertaoIntroducing the new Touratech suspension Touratech have launched a range of topnotch shock absorbers that enable individual tuning for all kinds of uses and set standards for traction, comfort and dynamic safety. There is now a choice of five product lines for different requirement profiles: Level 1, Level 2 and 2e, High End and Extreme. All shock absorber types are manufactu-red to the highest engineering and quality standards. You will certainly feel the difference in riding comfort!

Information on Touratech suspension and theavailable versions can be found starting on page1306 !

BMW F 650 GS Dakar300-5860 Level 1 300-5880 Level 2

Illustration similar

Progressive Replacement Springs Full set by Hyperpro, the Dutch specialist for suspension products. The set includes replacement fork springs and a replacement spring for the shock absorber. The progressive springs have been designed to match the BMW perfectly, and offer a tremendous improvement in response and greater safety in extreme situations. Replacing the front and rear springs will lead to a significant improvement in your suspension system.

BMW G 650 GS:300-5882 Level 2 G 650 GS Sertao:300-5883 Level 2


040-7435 BMW F650GS *2000-2007*

300-5837 BMW G650GS *from 2009*



040-7436 BMW F650GS *2000-2007*

300-5836 BMW G650GS *from 2009*


567566

TT37 - G650GS

TT39 - F650GS

Tank Conversion Kit BMW F 650 GS/Dakar / G 650 GS/Sertao

Unfortunately, it is not an easy job to increase the volume of the tank and extend the range of the BMW F / G 650 GS.We decided to increase the total volume to 39 / 37 litres using the tried and tested rallye side tanks. This conversion kits turns the F 650 GS and the new G 650 GS into true touring bikes suitable for long-distance trips. A similar idea which keeps the basic structure of the bike unchanged, with useful additions, you will hardly find anywhere else.The original tank is retained and must be retrofitted with some special parts (i.e. fuel supply connection kit). The fuel pump is retained. All parts are designed to fit. The tanks come from elkamet and are made out of Polyamide 6 which is virtually indestructible.The tanks and all other mounting and fairing components can be painted by any paint shop in the colour of your choice. The kit comes supplied with all parts and certificates needed for registration.

Kit contents:- Tank left + right (11litres each)- Tank holder left + right- Tank cover (joining piece between left and right tank)- Adapter parts (between tanks and fairing)- Petcocks, hoses and tank cap- Seat- Screws and miscellaneous partsBeginning with the 2004 model, you need the front mudguard and the tank emblem from the2003 model!

100-1100 F 650 GS/Dakar (TT 39)300-5600 G 650 GS/Sertao (TT 37)

BMW F650GS / G650GS567566

Number Plate ReinforcementF 650 GS/Dakar / G 650 GS/SertaoReinforces the original plastic holder. Our aluminiumnumber plate reinforcement is supplied with fixingscrews. Changes to the motorbike are not necessary.051-1202

Mudguard FlapF 650 GS/Dakar / G 650 GS/Sertao- Effective mudguard flap for the rear wheel- Even without the standard mudguard flap your back and your luggage stay clean- Also serves as a number plate reinforcement- Powder- coated aluminium- Black plastic coating040-0281

Rear silencer: REMUS RoxXBMW G 650 GS/Sertao ab 2011A truly stunning, perfectly styled and well-integrated rear silencer; exceptional design and workmanship. This rear silencer will give your BMW G650GS /Sertao that truly full, throaty one-cylinder sound.Features:- Black outlet cover- Jacket made of *stainless steel* or *titan*- Core made of *stainless steel* or *titan*- Asymmetric, hexagonal-shaped jacket- Carbon attachment clamp- Dual system with removable sound insert- Weight: approx. 2.6 kg (2.28 kg) including connection pipe- Increases power and torque- Superb sound- Includes connection pipe for original manifold- Road legal300-5850 *stainless steel* 300-5851 *titan*

Sport Seat Black

300-5911 (low) 300-5912 (standard) 300-5913 (high) 300-5914 (extra high)

Sport Seat F 650 TT 39

055-2065 (standard)

569568

IN THE EU - (GERMANY)

Tail Rack BagBMW F 650 GS/Dakar / G 650 GS/Sertao

This tail rack bag for the BMW offers approx. 11.5 litres of carrying capacity. Two tensioning straps tied shortwise are used to securely fix the bag to the luggage rack. An additional tensioning strap can be put lengthwise. The bag features a closed- cell foam base for non-slip, limpet attachment. A zip expands the bag to approx. 19.5 litres of capacity.Size: approx. 31 x 25 x 15,expands to approx. 31 x 25 x 25 cm.

055-1207

VP 45 Tank BagBMW F 650 GS/Dakar / G 650 GS/SertaoThe proven VP 45 tank bag, now with a new top section! Along with a volume of about 25 litres (reducable to about 18 litres), it features reinforced sides and two outer pockets toward the back with two-way zips. The ergonomically designed side pockets provide an additional 10 litres of storage capacity for a total volume of 45 litres. You will find more information on page 1197! Colour: black. Size (l x w x h): approx. 31 x 29 x 22/32 cm.

055-1082 VP 45 tank bag 055-0069 Rain hood

Tank Bag for BMW F 650 GS/Dakar,and TT 39 / G 650 GS/Sertao

- Base plate adapted to the shape of the tank- Reinforced side panels for optimal stability- Approx. 18 litres volume, expandable to approx. 25 litres - Lateral, reflecting elastic strap, for example for gloves- Two external pockets on the side with 2-way zips- Large, removable A4 map pocket (28 x 32 cm) with Velcro fasteners- Sturdy carrying handle- Two straps included to enable use as a knapsack or shoulder bagSize: (l x w x h): approx. 31 x 29 x 22/32 cm.Colour: black.Made from Teflon-coated CORDURA which is both water-repellent and dirt-resistant.

300-5801 Tank bag055-0069 Rain cover

BMW F650GS / G650GS569568

Luggage Rack BMW G 650 GS/Sertaoand F 650 GS/Dakar from 2004 onw.

Whether for a short break with a small luggage roll or an extended tour with a packsack and panniers, our luggage rack makes it easy to secure your luggage.This sturdy luggage rack offers many ways to attach your gear, giving you the extra room you need to carry your luggage on your bike.

300-5450

ZEGA Pro Topcase Rack BMW F 650 GS/Dakar (from 2004)BMW G 650 GS/SertaoThe special carrier for our ZEGA Pro topcases.Made entirely of stainless steel and specifically designed for the BMW attachment points, the topcase rack is the perfect way to attach ZEGA Pro topcases to your bike. The topcase rack can be used on its own or in conjunction with our pannier system.

300-5455

JM Luggage RackBMW F 650 GS/DakarSturdy luggage rack for the F 650 GS/Dakar.- 4 mm anodised aluminium- Useful for storing your luggage securely- Functional slots for fixing securing straps.Up to model 2003!

051-1200

571570

050-0670

050-0653

Stainless Steel Pannier RackBMW F 650 GS /Dakar / G 650 GS/SertaoThe pannier rack is made from robust 18 mm stainless steel and is electropolished. It is attached using the existing attachment points. The robust construction is located as close as possible to the rear frame and can be used with the original silencers or aftermarket silencers. This does not affect the ability to carry a pillion passenger. This pannier system turns the G 650 GS into a real adventure bike.300-5555

ZEGA Pro Topcase

The Zega Pro Topcase offers all of the same advantages as are found with our tried and tested ZEGA Pro panniers! Absolutely waterproof Topcase made from rugged, polished aluminium with protective corners! On the lid are four top loops for attachment the luggage.

Dimensions:25 Litre Topcase (l x w x h): 315 x 400 x 180 mm38 Litre Topcase (l x w x h): 315 x 400 x 300 mm (helmet fits in!)

ZEGA Pro Topcase050-0650 25 litres050-0670 25 l / with Rapid Trap 050-0660 38 litres050-0680 38 l / with Rapid Trap

ZEGA Pro *AND-S* Topcase 050-0652 25 litres050-0672 25 l / with Rapid Trap050-0662 38 litres050-0682 38 l / with Rapid Trap

ZEGA Pro *AND-black* Topcase050-0653 25 litres050-0673 25 l / with Rapid Trap050-0663 38 litres050-0683 38 l / with Rapid Trap

BMW F650GS / G650GS571570

110 cm

45

94,0 cm

31

102 cm

38

ZEGA Pro Aluminium Pannier System BMW F 650GS / Dakar

ZEGA Mundo 31/31 litres 300-6150



ZEGA Pro 31/31 litres 052-3155

ZEGA Pro AND-S 31/31 litres 052-3156

ZEGA Pro AND-Black 31/31 litres 052-3157







ZEGA Pannier System BMW F 650 GS /DakarThe aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been perfor-med in order to ensure that the entire development satisfies the required demands.

The rack is made of 18mm steel tubing and is attached to existing mounting points. Pillion comfort not restricted in any way. Enhances the enduro and touring appearance of the F 650 GS Zega Aluminium pannier system pannier rack including mounting hardware, premounted.

573572

102,0 cm

38

94,0 cm

31

110,0 cm

45

ZEGA pannier system BMW G 650 GS/Sertao / F 650 GS/Dakar













ZEGA Pannier System G 650 GS/Sertao / F 650 GS/Dakar with Stainless Steel RackThe aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm stainless steel tubing and is attached to existing mounting points. Pillion comfort not restricted in any way. Aluminium pannier system, premounted.Delivery schedule of the system:- 2 aluminium panniers ZEGA, with pre-fitted 18 mm fixing kit - 1 stainless steel pannier rack including mounting hardware

BMW F650GS / G650GS573572

ZEGA PRO2

stainless Steel

ZEGA Pro2 31 litres 300-6000

ZEGA Pro2 AND-S 31 litres 300-6001

ZEGA Pro2 AND-Black 31 litres 300-6002







Zega Pro2 Aluminium Pannier System with stainless steel rack for BMW G 650 GS/Sertao / F 650 GS/Dakar

The next step in evolution After Zega and Zega Pro, we have now developed the Zega Pro2. Based on the Zega Pro, its excellent properties have all been retained, but many details have also been significantly improved. The Zega Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation. Above all, though, the pre-assembled version is an absolute revoluti-on! It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use, facilitating single-handed use - you could say it‘s „Plug and play“ for fully packed aluminium panniers!

Documents

BMW G|F650GS|Dakar | Sertao special parts F650GS / G650GS 548 549 Headlight Protector Makrolon / Stainless Steel with Quick Release Fastener BMW G 650 GS Our headlight protector has