BMT Tank - s3.serverdata.coms3.serverdata.com/ · 77 lot -saw blades 78 (2) 7 1/4'' skilsaws 79 (2) 7 1/4'' skilsaws 80 dewalt portable bandsaw 81 dewalt recip saw 82 partner k700

Live/Webcast Auction

BMT Tank

June 24 & 25

Starting at 9:00 AM MDT

Buyers Premium: 15%/18%

Payment: Cash, Wire Transfer, Certified Check, Company Check with Bank Letter of

Guarantee

Questions: Kat (847) 499-7049

Removal: June 26 – July 10; 8:00 – 4:00

Removal Contact: Rene (818) 324-4886

All Sales Final. Everything Sold As Is, Where Is. Inspect Before You Buy!

www.hyperams.com

(847) 499-7049

www.cia-auctions.com

(513) 241-9701

http://www.hyperams.com/

www.cia-auctions.com

1. IDENTIFICATION: All purchasers are required to register and give full name, address and drivers

license.

2. Buyer is responsible for any applicable Sales and Use Taxes and will supply AUCTION

COMPANY/SELLER documentation and proof that is acceptable to the State in which assets are located

as satisfactory to the Auctioneer. For purchases without proof of exemption, a sales tax rate of 7.00% will

be added to the purchase price plus the buyer’s premium and remitted to the Auction Company.

3. A Buyer’s Premium of 15% onsite and 18% online of the bid price will be added to the price of each

item purchased to arrive at the total purchase price.

4. AUCTIONEER reserves the right to group, reduce, add or delete lots. AUCTIONEER reserves the right

to bid on behalf of the owner.

5. REMOVAL: Buyer is solely responsible to provide any personnel, equipment or material needed to pick

up purchases and shall assume all responsibility for the removal of any item purchased at the sale. Buyer

is required to remove all items (June 26 - July 10) within the stated time frame which is on their invoice

unless prior arrangements have been made in writing and approved by AUCTIONEER/SELLER. Items

will be considered abandoned, and buyer shall lose all rights to said equipment without recourse or refund

due from AUCTION COMPANY/SELLER after the removal deadline.

6. Although information has been obtained from sources deemed reliable, AUCTIONEER/SELLER makes

no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained or

the fitness for duty of any of the assets. All assets are being sold “AS IS, WHERE IS, NO

EXCEPTIONS”.

7. If for any reason an item shall become non-deliverable, AUCTIONEER/SELLER shall not, in any event,

be liable for non-delivery, or for any other matter or thing, to any Buyer of any lot, other than for the return

to the Buyer of monies actually paid to AUCTIONEER/SELLER for said lot, should the Buyer be entitled

thereto. No adjustments will be made after the assets are removed from the sale site.

8. PAYMENT: Invoices must be paid in full within 24 hours of the closing date of the sale unless

otherwise specified. A buyer’s premium of 15% onsite and 18% online will be applied to all invoiced

sales and sales tax will apply without appropriate proof of exemption. Business checks will not be

accepted without a letter of verification from your bank similar to below. (Your Bank Name)

unconditionally guarantees payment to HYPERAMS, LLC from (Your Company Name) up to the amount

of __________. This guarantee will be valid for purchases made at the auction of (Auction Name) on

(Auction Date). NO ASSETS WILL BE RELEASED UNTIL INVOICE IS FULLY PAID.

9. MANNER OF PAYMENT: All deposits and balances due shall be payable to the order of HYPERAMS,

LLC. All payments must be made by Cash, Cashier`s Check, Wire Transfer or Company Check with

Bank Letter of Guarantee. The full purchase price on all lots sold to the same buyer must be paid in full

within 24 hours of the auction closing date and before removal of any of the assets.

10. All assets are being sold “AS IS, WHERE IS” and buyer acknowledges they have inspected all assets

prior to bidding. While all care was taken in gathering information on the equipment that is for sale,

AUCTIONEER/Seller will not be held responsible for the correctness of the descriptions. INSPECT

BEFORE YOU BUY!

11. All persons are inspecting, bidding and removing assets at their own risk and liability without recourse

on AUCTIONEER/SELLER. Further the undersigned and their employees or agents agree to hold

AUCTIONEER/SELLER and their agents and employees harmless from all claims of any kind or type.

12. All sales are in US Dollars.

13. By agreeing to these terms and conditions you signify that you have the authority and you are binding

your company, yourself (as an individual and/or employee) and any agents or persons who conduct

business using your buyers number and/or under your employment or control. This includes liability as to

payment and all disclaimers.

14. Buyer hereby agrees to defend, indemnify and hold harmless AUCTIONEERSELLER their directors,

officers, employees and other agent representatives from and against any and all liabilities, judgments,

claims, settlements, losses, damages, penalties, obligations and expenses, including attorney’s fees,

incurred or suffered by such person arising from, by reason of, or in connection with any loss, damage or

injury to person or property arising from, by reason of or in connection with the assets sold hereunder.

15. Any controversy or claim arising out of or related to this Agreement, or any alleged breach of the

terms hereof, shall be settled by arbitration in accordance with the rules, procedures, and regulations

promulgated by the American Arbitration Association (“Arbitration Proceeding”). The arbitration hearing

shall be held in the State of Illinois. The Parties hereby agree that the award rendered by the person

conducting the Arbitration Proceeding (“Arbitrator”) shall be final and nonappealable, and judgment may

be entered upon the award in any court of competent jurisdiction. The Arbitrator shall not have the

authority to award punitive damages against either Party. The Party who files notice of demand for an

Arbitration Proceeding (“Initiator”) must assert in such demand all claims then known to the Initiator

against the other Party (“Respondent”), and the Initiator may amend its demands and claims only with the

consent of the Arbitrator.

16. Backup Bidder: If a winner at the auction does not meet obligations to pay for the lot purchased, the

next highest bidder will be considered the winning bidder and will be required to close on such purchase

within the terms and conditions herein.

17. ADDITIONAL TERMS AND CONDITIONS: The AUCTIONEER may add other terms and conditions of

sale, such additional terms and conditions to be posted online prior to the auction.

Sale in Conjunction with Cincinnati Industrial Auctioneers

BMT AUCTION

DAY 1

1 DEWALT RIGHT ANGLE GRINDER 7''X 9''






































39 MILWAUKEE RIGHT ANGLE GRINDER 7''X 9''



42 HILTI RIGHT ANGLE GRINDER 7''




46 (1) MAKITA 7'' & (1) MAKITA 5'' RIGHT ANGLE GRINDER

47 9'' RIGHT ANGLE GRINDER

48 7'' RIGHT ANGLE GRINDER

49 RIGHT ANGLE GRINDER

50 RIGHT ANGLE GRINDER

51 (2) 5''/6'' ANGLE GRINDER









60 (3) 4-1/2'' SKIL ANGLE GRINDERS

61 (2) MILWAUKEE 4-1/2'' ANGLE GRINDER

62 (2)4-1/2'' ANGLE GRINDER (1-HILTI & 1-DEWALT)

63 (2) 4-1/2'' ANGLE GRINDERS (1-PORTER CABLE & 1-CHICAGO)

64 ELECTRIC NIBBLER

65 ELECTRIC NIBBLER

66 (3) AIR ANGLE GRINDERS

67 (4) AIR ANGLE GRINDERS

68 HOLEMAKER MAGNETIC BASE DRILL

69 MILWAUKEE MAGNETIC BASE DRILL

70 HOUGER MAGNETIC BASE DRILL

71 SLUGGER MAGNETIC BASE DRILL

72 MAG FORCE MAGNETIC BASE DRILL

73 MAGNETIC BASE ONLY

74 DEWALT 14'' CHOP SAW



77 LOT-SAW BLADES

78 (2) 7 1/4'' SKILSAWS

79 (2) 7 1/4'' SKILSAWS

80 DEWALT PORTABLE BANDSAW

81 DEWALT RECIP SAW

82 PARTNER K700 ACTIVE II DEMO SAW

83 STIHL TS400 DEMO SAW

84 AIR IMPACT

85 AIR IMPACT

86 AIR DRILL

87 DEWALT BATTERY OPERATED DRILL

88 (2) ELECTRIC DRILLS W/1 CASE

89 BOSCH BULLDOG HAMMER DRILL W/CASE

90 BOSCH MODEL.11244E HAMMER DRILL W/CASE

91 BOX OF COMBINATION WRENCHES




95 BOX OF SOCKETS

96 BOX OF SOCKETS

97 BOX OF SOCKETS, EXTENSIONS & RATCHETS

98 BOX OF TAPS & DIES

99 (2) C-CLAMPS

100 (6) C-CLAMPS

101 (6) C-CLAMPS

102 (3) C-CLAMPS

103 (6) C-CLAMPS

104 BOX OF CHIPPING HAMMERS

105 BOX OF SMALL SLEDGE HAMMERS

106 (9) SLEDGE HAMMERS

107 ASSORTED LARGE PRY BARS




111 ASSORTED SMALL PRY BARS

112 48'' PIPE WRENCH

112A 24'' RIDGID ALUMINUM PIPE WRENCH

113 (11) ASSORTED LEVELS

114 (10) ASSORTED LEVELS

115 LOT-SQUARES

115A (2) PEDESTAL FANS

116 LINCOLN WELDER, IDEALARC R3R-500, DC ARC WELDER, S#AC350647, CODE 7548

116A LOT-DRSK, AIR HOSE, CHAIN, BLUE SHELF UNITS, MISC, PRY BARS

117 LINCOLN WELDER FLEXTEX 450 S#U1120508630

118 LINCOLN WELDER FLEXTEX 450 S#1120508631


120 LINCOLN WELDER FLEXTEX 450 S#1120508633

121 4 PAK RACK W/LINCOLN ELECTRIC PANEL
















137 LINCOLN WELDER INVERTEC V350 PRO S#U1061101889



















156 LINCOLN WELDER DC-655 S#U1090403908






162 6 PAK RACK

163 LINCOLN WELDER DC600 CV/CC S#U1070201785 W/LONG CORDS

164 RACK W/ELECTRIC PANEL

165 POWER DISTRIBUTION PANEL MODEL.DP25

166 HERTNER BATTERY CHARGER MODEL.3TF18-960, 36 VOLT

167 BASSI MTL 2 BATTERY CHARGER 48 VOLT

168 LINCOLN WELDER IDEALARC DC-400 S#AC598141

169 LINCOLN WELDER FLEXTEC 450 S#U1120110678 W/LINCOLN LF-74 WIRE FEED S#U1120110651

170 LINCOLN WELDER FLEXTEC 450 S#U1120200704 W/LINCOLN LF-74 WIRE FEED S#U1120109395

171 LINCOLN WELDER POWER WAVE 455M W/LINCOLN WIRE FEED 10M S#U1070810125

172 LINCOLN WELDER POWER WAVE 455M S#U1071011030 W/LINCOLN WIRE FEED 10M S#U1071008856



175 LINCOLN WELDER RSR-500 S#U1950522030

176 LINCOLN IDEALARC DC-600 S#AC768100 W/LINCOLN WIRE FEED LN-7 S#184680

177 LINCOLN WELDER DC-600 S#U1091206539 W/LINCOLN WIRE FEED LT-7 TRACTOR S#U1120301705

178 LINCOLN WELDER IDEALARC DC-600 S#AC768107 W/LINCOLN WIRE FEED LN S#U1990103554

179 LINCOLN WELDER FLEXTEC 650 S#01120907807

180 LINCOLN WELDER FLEXTEC 650 S#U1120602126







187 LINCOLN WELDER RANGER 8, GAS POWERED S#U1940317685

188 LINCOLN IDEALARC DC-600 S#AC488691 W/LINCOLN FEED LT-7 TRACTOR S#U1961006062

189 LINCOLN WELDER R3R-300 S#AC515695

190 THERMAL DYNAMICS PAK 10XR PLASMA CUTTER S#Y00417A183501-D

191 RACK

192 AIRCO WELDER DIP-COR 300

193 MILLER WELDER CP-250TS S#JA372932 W/MILLERMATIC 80A WIRE FEED S#HJ158076

194 MILLER WELDER CP-302 S#LA76005 W/MILLER WIRE FEED 22A S#LA271311

195 MILLER WELDER CP-302 S#LC456368 W/MILLER WIRE FEED S-22A S#KH550917

196 MILLER WELDER 500 AMP S#HJ211241

197 MILLER WELDER CBI-400 S#JA360175

198 MILLER WELDER BOBCAT 224, GAS POWERED, S#KK003879, 2122 HOURS

199 ESAB MIG 4002 C WELDER S#850-239-0106 W/ESAB ARISTO U6 FEED 3004 S#910-202-5148




203 MILLER WELDER XMT-350 CC/CV S#LE484968 W/MILLER EXTENDED REACH WIRE FEEDER S#LE447194

204 LINCOLN WIRE FEED LN-25 PRO

205 LINCOLN WIRE FEED LN-25


























231 HYPERTHERM PLASMA CUTTER POWERMAX 1000 S#1000-043233








239 LINCOLN PLASMA CUTTER PRO-CUT 55 S#U1070303467

240 HYPERTHERM PLASMA CUTTER POWERMAX 600 S#PMX-600-933656

241 (20) BOXES WELDING WIRE 308/308L, 3/32'' S522529-062



244 (37) BOXES WELDING WIRE, ASSORTED E308LT1-1/4, SIZE .045'', L56 .045'', ETC

245 SKID OF ASSORTED SPOOLS OF WELDING WIRE

246 (10) BOXES OF ASSORTED WELDING WIRE, (8) BOXES 308/308L 3/32'' X COIL, 60#

247 (35) BOXES McKAY STERLING AP 308/308L 3/16'' WELDING IWRE, (4) ASSORTED WELDING WIRE

248 (26) BOXES McKAY STERLING AP309(H)-16 1/8'' WELDING WIRE

249 (18) BOXES McKAY STERLING AP 308/308L 3/16''






255 GANG BOX FULL OF MCKAY WELDING ELECTRODES

256 CRATE OF MCKAY WELDING ELECTRODES

257 (72) BOXES ASSORTED LINCOLN WELDING WIRE

258 (46) BOXES ASSORTED WELDING WIRE

259 (81) SPOOLS OF ASSORTED WELDING WIRE

260 SKID OF WELDING WIRE ASSORTED

261 (38) TINS OF ASSORTED WELDING ELECTRODES

262 SKID OF ASSORTED WELDING ELECTRODES



265 DRY ROD II OVEN

266 DRY ROD II OVEN

267 (5) DRY ROD 10# OVENS & (1) DRY ROD PHOENIX OVEN

268 4 TON SHEET GRABBER









277 SHEET GRABBER















292 SHEET GRABBER



295 2 1/2 TON SHEET GRABBER

296 2 1/2 TON SHEET GRABBER

297 SHEET GRABBER













310 SHEET GRABBER

311 1/2 TON SHEET GRABBER









320 SHEET GRABBER


322 SHEET GRABBER


324 2 TON CM CHAIN FALL








332 KITO CORR 1 1/2 TON CHAIN FALL

333 KITO CORR 1 1/2 TON CHAIN FALL

334 JET CHAIN FALL

335 JET 1-1/2 TON CHAIN FALL





340 1 TON CHAIN FALL

341 1 TON CHAIN FALL

342 CHAIN FALL

343 6 TON CHAIN RATCHET COME ALONG












355 1.6 TON CHAIN RATCHET COME ALONG








363 CHAIN RATCHET COME ALONG





367A (2)1.5 TON CHAIN RATCHET COME ALONG


369 CHAIN RATCHET COME ALONG

370 3/4 TON CHAIN RATCHET COME ALONG

371 3/4 TON CHAIN RATCHET COME ALONG


373 600# AIR HOIST

374 BOX OF GAUGES

375 BOX OF GAUGES

376 BOX OF GAUGES

377 BOX OF GAUGES

378 BOX OF GAUGES

379 BOX OF GAUGES

380 BOX OF GAUGES

381 BOX OF GAUGES

382 BOX OF GAUGES

383 BOX OF GAUGES

384 BOX OF GAUGES

385 BOX OF GAUGES

386 BOX OF GAUGES

387 BOX OF GAUGES

388 BOX OF GAUGES

389 BOX OF NEW TORCH BODY, HOSE & GAUGES

390 (5) TORCHES

391 BOX OF 4 TORCHES





396 BOX OF 9 ROSE BUDS

397 BOX OF 14 TORCH TIPS

398 BOX OF BRASS FITTINGS

399 (2) NEW TORCH HOSES

400 TORCH HOSE

400A TORCH HOSE W/GAUGES & TORCH

400B VICTOR PORTABLE TORCH SET

401 8'X 14'6'' STEEL TABLE, 1-1/4'' TOP

402 5'X 20' STEEL TABLE, 3/4'' TOP

403 CONTENTS OF RACK, FALL RIGS, CHAIN, SHEET GRABBER, ELECTRIC CORD

404 CONTENTS OF RACK, TANK RACK, CHAINS, SHEET LIFTERS, ETC

405 (13) HOTSPOTTER GAS TORCHES

406 (15) HOTSPOTTER GAS TORCHES

407 (2) NEW HOTSPOTTER TORCHES

408 (7) GAS TORCHES

409 (8) GAS TORCHES

410 RIDGID HAND HELD THREADER MODEL.700-T2

411 MBX BRISTLE BLASTER

412 KOBALT ELECTRIC IMPACT 1/2''

413 HILTI ELECTRIC IMPACT 1/2''

414 PORTA POWER W/JACK





419 TORCH CART W/HOSE & TORCH

420 TORCH CART W/HOSE & GAUGES

421 TORCH CART W/HOSE & GAUGES

422 TORCH CART W/HOSE & TORCH

423 TORCH CART W/SINGLE HOSE

424 TORCH CART W/HOSE, GAUGES & TORCH

425 TORCH CART W/HOSE, (1)GAUGE & TORCH



428 AIRCO WELDER MODEL CV-450 S#B66134/9

429 ALUMINUM RAILS & BRACKETS W/STEEL BOX

430 OLD LATHE 15''X 84''

431 3 SHELF UNIT W/CONTENTS & MISC ALONG WALL

432 CONVEYOR (EXTENDS ' OUTSIDE) TOTAL LENGTH APPROX. 138'

432A GO OUTSIDE

433 WA WHITNEY C PUNCH W/POWER UNIT

434 JET CHOP SAW MODEL.COM20M, 7.5HP

435 OUT

436 OUT

437 MECHANICAL APRON BRAKE, 3/8" x 10', AND H-FRAME PRESS, 1 HYDRAULIC POWER UNIT

438 INGERSOLL RAND AIR COMPRESSOR, MODEL.160i-A125, 905CFM@115 PSI,200HP S#V1367U11311

439 INGERSOLL RAND AIR COMPRESSOR MODEL.SSR-EP200, 200 HP, 892CFM@125 PSI, 64112 HRS, F12870U96032

440 VAN AIR DRYER, V1367U11311, 2011

441 RECIEVER TANK

441A GO INSIDE

442 ''KAT'' CARRIAGE COMPACT OSCILLATOR SYSTEM, MODEL.GK-200-FMB-L W/FLEX TRACK & 12 KAT TRACK MOUNTING ASSEMBLY




446 ''KAT'' CARRIAGE COMPACT OSCILLATOR SYSTEM, MODEL.GK-200-FLB-L01/15/09 W/FLEX TRACK & 12 KAT TRACK MOUNTING ASSEMBLY

447 LINCOLNWELD SOLID STATE LN-7 TRACTOR WIRE FEED





452 LINCOLNWELD SOLID STATE NA-35 WIRE FEED

453 BUG O LINE TORCH MODEL.MPD-1000

454 BUGO GO-FER III LINE TORCH

455 AIRCO LIN TORCH

456 LT-1 FLUX BOX W/MULTI-DRIVE DC MOTOR SPEED CONTROLLER

457 H & M PIPE BEVELING MACHINE CO #45506-H12

458 H & M PIPE BEVELING MACHINE CO #46826H8

459 HOBO CIRCLE CUTTER

460 (10) KAT TRACK MOUNTING ASSEMBLY #GK-165-215



463 T GUN SEMI AUTOMATIC MIG GUN

464 T GUN SEMI AUTOMATIC MIG GUN

465 SKID OF CORDS & LEADS










475 STEEL TABLE 4'X 8'9''

476 STEEL TABLE 3'9''X 8'9''

477 ESAB/LINDE CNC PLASMA SHAPE CUTTING SYSTEM, CM-350, (1) PLASMA HEAD, (1) TORCH HEAD, WITH 10' X 60' WATER TABLE, CNC BURNY PHANTOM CONTROL, AND HYPERTHERM HPR260 PLASMA POWER UNIT, SN 003053 W/SPARE PART

478 LARGE STEEL SCRAP BIN

479 6000 WATTS PORTABLE GENERATOR, TROY BUIL, 8250 STARTING WATTS, MODEL.936475

480 5500 WATTS PORTABLE GENERATOR, MODEL.GP5500, GENERAC, 6875 STARTING WATTS

481 4000 WATTS PEAK/3500 WATTS RUNNING, CHAMPION GENERATOR

482 BANDING CART W/TOOLS

483 BANDING CART W/TOOLS

484 STEEL TALBE 3'5''X 3'10'', W/H-FRAME PRESS

485 BELT SANDER 6'' W/DUST COLLECTOR

486 ROCKWELL FLOOR MODEL DRILL PRESS, 110 VOLTS

487 DELTA FLOOR MODEL DRILL PRESS, MODEL.17-950L 110 VOLT

488 WALKER TURNER FLOOR MODE. DRILL PRESS 220 VOLT

489 CRAFTSMAN DOUBLE END BENCH GRINDER 1/3HP, 120 VOLT

490 BLACK & DECKER DOUBLE END GRINDER 8'', 120 VOLT

491 RYOBI 10'' TABLE SAW

492 KING HORIZONTAL BAND SAW, 7''X 12'', MODEL.KC-712BC, 120 VOLT

493 CARLTON RADIAL ARM DRILL, 3'X 9', SWIVEL KNEE TABLE, S#1A2013

494 BULLARD 42'' VTL W/SIDE HEAD

495 INGERSOLL RAND AIR COMPRESSOR, VERTICAL TANK, 5.5/7.5HP

496 10 DRAWER EQUIPTO CABINET W/PUNCHES, REAMERS, DRILL BITS, ETC

496A CART W/RIDGID DIE HEADS

496B LOCKERS, 20 DOORS

497 (3) WELDING SCREENS

498 7 DRAWER CABINET W/TORCH PARTS

499 MSA LYNX HOIST W/TRIPOD

499A GUARDIAN FALL PROTECTION MK EDGE SERIES RETRACTABLE W/TRIPOD

500 RIDGID GANG BOX

501 BLACK CABINET W/CONTENTS & MISC IN CORNER

502 STEEL WORKBENCH W/VISE & CONTENTS

503 2 DOOR METAL CABINET W/SAFETY EQUIPMENT, GRINDING WHEELS, ETC

504 2 DOOR CABINET (NO CONTENTS)

505 2 DOOR CABINET W/WELDING, SAFETY, GRINDING

506 METAL CABINET W/STRAPS & MISC

507 10 DRAWER EQUIPTO CABINET W/BOXES ON TOP & FUSES, PEERLESS PARTS, WELDING, ETC

507A PAK MASTER 75 (COVER OFF) W/CONTENTS OF CORNER

508 STEEL TABLE 2'8''X 4'6'' W/CONTENTS, 4 DRAWER FILE, BROWN METAL CABINET

509 CONTENTS OF 2ND FLOOR

509A (4) VACUUMS, GEAR DRIVE

510 ELECTRODE STABILIZING OVER, GULLCO MODEL.125

511 LASER PLANE 220 LEVEL W/TRIPOD & STICK

512 DAVID WHITE AL8-26 W/TRIPOD & STICK

513 (4) TRIPODS

514 ROLLING FAN

515 ROLLING FAN

516 ROLLING FAN

517 ROLLING FAN

518 ROLLING FAN

519 ROLLING FAN

520 ROLLING FAN

521 ROLLING FAN

522 ROLLING FAN

523 SUMMIT GEARED HEAD DRILL PRESS

524 DOUBLE END PEDESTAL GRINDER

525 LINCOLN FLEXTEC 450 WELDER S#U1120609318

526 HENKEL MODEL.K-200 ROD OVEN

527 ROLLING FAN

528 ROLLING FAN

529 CRAFTSMAN ROLLING TOOL BOX

530 (2) ROUND TABLES & (2) ROLLS

531 (6) RIDGID STANDS

532 WELDING POSITIONER MODEL.TTP50,500# CAPACITY

533 STEEL TABLE 3'X 5' W/VOGEL MODEL.CSP25SA CUTOFF

534 MARVEL BANDSAW, MODEL.8-MARK-III, S#840183

535 WYSONG 6' INTIAL PINCH PLATE ROLL, B-72, 3/16", PR21-164

536 ROUNDO ANGLE ROLLS, MODEL.R-52-S, CAPACITY 5''X 5''X 1/2'', S#098503, YEAR 2009

537 RADIUS GAUGES

538 CONVEYOR 11' LONG, 30'' ABOVE RAIL ROLLS



541 STOCK STANDS

542 STOCK STAND

543 STOCK STAND

544 STOCK STAND

545 STOCK STAND

546 OUT

547 OUT

548 OUT

549 OUT

550 OUT

551 (2) SECTIONS OF PALLET RAACKING W/FLANGES, ELBOWS, COVERS, ETC

552 2 DOOR BOX W/BALANCER, AIR COUPLERS, ROD, ETC

553 BROWN SHELF UNIT W/COVERS, BOLTS, ETC & CONTENTS OR RACK, SHEET LIFTERS, C CLAMP, FLANGES

554 (4) TORCH CARTS

555 PURPLE ROLLING LADDER

556 GREEN JOB BOX W/LOOSE METAL FROM CORNER TO SHED

557 LINCOLN WELDER SAE300, S#A606555

558 LINCOLN WELDER, IDEAL ARC T1G 300/300 AC/DC, S#AC723684

559 LINCOLN WELDER 400 AMP S#AC426233

560 (2) LIFTING BEAMS (SHOPMADE) APPROXIMATELY 36' LONG

561 (3) HEAVY DUTY SAW HORSES 10' WIDE

562 POWERED TANK ROLLS APPROXIMATELY 40' LONG

563 POWERED TANK ROLLS APPROXIMATELY 36' LONG

564 PANDJIRIS WELDING MANIPULATOR W/(3) TANK ROLLS (1 POWERED, 2 SLAVES), IDEALARC DC-1000 WELDER (S#AC854220), PURPLE ROLLING LADDER, WIRE FEEDER & FLUX

565 TANK ROLLS W/ROLL IN END, APPROXIMATELY 42'

566 RED STORAGE SHED W/CONTENTS

567 CIRCLE SHEAR, BLUE VALLEY MACHINE MODEL.SHEAR 60-376, 3/8'' CAPACITY

568 WHITE STORAGE SHED W/CONTENTS

569 STEEL BEAMS, SHEETS, ROUND. CHANNEL ON CORNER OF RED & WHITE SHEDS

570 POWERED TANK ROLL APPROXIMATELY 30'

571 WEBB POWERED TANK ROLL APPROXIMATELY 15'

572 PRESTON-EASTIN TANK ROLLS, 1 SLAVE, 1 POWERED, 5' CENTER MAC

573 WEBB TANK ROLLS, 1 SLAVE, 1 POWERED, 4'9'' CENTER MAX

574 TANK ROLLS, 1 SLAVE, 1 POWERED, 2' CENTER MAX

575 TANK ROLLS, 1 SLAVE, 1 POWERED, 2' CENTER MAX

576 (1) POWERED TANK ROLL, 7' CENTER MAX

577 TANK ROLLS, 1 SLAVE, 1 POWERED, HYD DRIVE

578 ARONSON TANK ROLLS, 1 SLAVE, 1 POWERED, 7' CENTER MAX

579 WEBB PLATE ROLL, MODEL.9L-1310, CAPACITY 10'/ 5/8'', S#RB-94-5073

580 WEBB PLATE ROLL, 18L, 1-3/16" x 10', 67114

581 LINCOLN IDEALARC R3R-300 DC WELDER, S#AC448874

582 (2) LINCOLN IDEALARC R3R-400 WELDERS W/RACK S#U1070310476 & U1070310387

583 LINCOLN IDEALARC DC-400 WELDER S#AC566390 W/LINCOLN LN-8 WIRE FEEDER S#105230

584 STEEL TABLE W/VISE 6'X 10'

585 ROLLING SCAFFOLDING

586 WELDING MANIPULATOR W/LINCOLN IDEALARC DC1000 WELDER, S#AC765554, LINCOLN MODEL.TC-3 WIRE FEED W/FLUX

587 WEBB FLANGER MDL M5, 1/2" CAPACITY, IDLER ROLLS ON RAIL, GUIDE ROLLS, SN # 6073

588 RADIUS GAUGES

589 LINCOLN FLEXTEC 650 WELDER S#U1120602132

590 BERTSCH PLATE ROLL 3/4" X 12' WITH (3) 14" DIAMETER PYRAMID ROLLS, M6958-A

591 3 OCLOCK GIRTH WELDING SYSTEM W/LINCOLN DC-600 WELDER S#U1070501822

592 3 OCLOCK GIRTH WELDING SYSTEM

593 3 OCLOCK GIRTH WELDING SYSTEM W/LINCOLN DC-600 WELDER S#U1070504854




596A HERCULES HYDRAULIC POWER SHEAR 1/2''X 10' CAPACITY S#5001201274149

596B ROLLER CONVEYOR 24' LONG, 6' OVER RAIL ROLLS

597 WYSONG HYDRAULIC POWER SHEAR 1/4" X 10', 1025, P37-196

598 (2) ROLLER CONVEYOR (1-15' & 1-6') 28'' OVER RAIL ROLL

599 CINCINNATI MECHANICAL PRESS BRAKE SERIES 21, 600 TON CAPACITY, SN#15259 (NO DIE OR BLADE)

600 4 WAY DIE 12'4'' & BLADE 10', IN PRESS BRAKE

601 A FRAME RACK W/PRESS BRAKE DIES & MISC STEEL

602 SENSITIVE TORCH ARM

603 (2) C PUNCHES ON TABLE W/HYDRAULIC POWER UNIT, W/PUNCHES

604 MUBEA HYDRAULIC IRON WORKER, MODEL.H1W1000/610, 110 TON CAPACITY W/PUNCHES, SN#HIW-1000/610-221

605 STONE SAW CUTOFF SAW TYPE M160, 15HP

606 1-3' SECTION & 1-7' SECTION OF CONVEYOR, 31 3/4'' ROLLS UNDER RAIL

607 (5) STOCK STANDS

607A STEEL WORK TABLE 6'X 9'

607B STEEL WORK TABLE 5'X 6'

608 ACORN TYPE WELDING TABLE 5'X 6'

609 PULLMAX PORTABLE 1'' BEVELING MACHINE, X-91, SN#59010-14

610 LINCOLN IDEALARC R3R-300 DC WELDER S#AC515706

611 NELSON STUD WELDER MODEL.TR-1800A, S#HE747757

612 FLANGER BLUE VALLEY MODEL.FLANGER NO. 4, 3/8'' CAPACITY, SN# 4-176

613 LINCOLN WELDER

614 ACORN TYPE WELDING TABLE 5'X 8' W/HOLD DOWNS

615 CONTENTS OF 20'CONTAINER

616 20' CONTAINER (NO CONTENTS)

617 WELDING LEADS, CORDS, ETC, BETWEEN 20' CONTAINER & BUILDING

618 STEEL WORK TABLE 3'X 6', W/VISE, SMALL STAND, A/C UNIT

619 BROOMS & SHOVELS

620 SKID OF STEEL CUT OUTS







627 CABLES, CHAINS, SHEET LIFTERS, ETC, HANGING ON STEEL POST

628 SKID OF LIFTING CABLES




632 SKID OF CLEAVES

633 SKID OF CLEAVES

634 SKID OF CHAIN BINDERS

635 SKID OF CHAIN BINDERS

636 SKID OF COME ALONGS

637 SKID OF COME ALONGS

638 SKID & 3 BUCKETS OF CHAIN BINDERS

639 SKID OF CHAIN COME ALONGS

640 CHAINS, SHEET LIFTERS, CABLES, HANGING ON STEEL POST

641 SKID OF LIFTING CHAINS, CLEAVES

642 SKID OF SHEET LIFTERS




646 SKID OF LIFTING CHAINS

647 SKID OF LIFTING CHAINS

648 SKID OF CHAIN COME ALONGS & HOISTS

649 GENIE PERSONNEL LIFT MODEL.PL30P

650 10' FIBERGLASS STEP LADDER


















668 16' FIBERGLASS EXTENSION LADDER





673 20' ALUMINUM EXTENSION LADDER

674 (7) STRAIGHT LADDERS & 1-4' STEP LADDER

BMT Auction

DAY 2

1001 DEWALT DW872 14" (35MM) MULTICUTTER, S/N: 366415

1002 DEWALT DW870 14" CHOPSAW TYPE 3 S/N: 73386-200420-LG

1003 MAKITA 24165 405MM PORTABLE CUTT-OFF SAW #127845E

1004 MAKITA 5477NB 7.258" HYPOID CIRCULAR SAW

1005 PERFORMAX 7.25" CIRCULAR SAW WITH LASER GUIDE

1006 SKIL 5585 7 1/4" CIRCULAR SAW

1007 MILWAUKEE HEAVY DUTY SAWZALL S/N: A65D611500941

1008 SKIL 8.5 AMP. SAWZALL

1009 MAKITA GA7031 7" ANGLE GRINDER S/N: 3790A

1010 DEWALT D28494 7"/9" ANGLE SANDER/GRINDER S/N: 121768

1011 DEWALT D28494 7"/9" ANGLE SANDER/GRINDER S/N: N/A

1012 DEWALT 7"/9" ANGLE SANDER/GRINDER

1013 DEWALT 7"/9" ANGLE SANDER/GRINDER

1013A DEWALT 7"/9" ANGLE SANDER/GRINDER

1014 DEWALT 7" ANGLE SANDER/GRINDER

1015 DEWALT D28478 7" ANGLE GRINDER S/N: 159785


1017 DEWALT D28478 7" ANGLE GRINDER S/N: N/A


1019 DEWALT D28478 7" ANGLE GRINDER S/N: N/A

1020 METABO 7"/9" ANGLE GRINDER

1021 MAKITA GA7010C 7" ANGLE GRINDER

1022 (2) ASSORTED MAKITA 5" ANGLE GRINDER

1023 (2) ASSORTED MAKITA 5" ANGLE GRINDER

1024 (2) ASSORTED MAKITA GA6010 5" AND 9557PB 4 1/5" ANGLE GRINDER

1025 (2) ASSORTED DEWALT & MILWAUKEE 4 1/2IN ANGLE GRINDER

1026 (3) ASSORTED BOSCH, PORTER CABLE AND BLACK & DECKER 4 1/2 "ANGLE GRINDER

1027 DEWALT DW887 1 1/2 DIE GRINDER, S/N: 8348

1028 KETT SCISSOR SHEAR MODFEL KD-480, S/N: 1109

1029 HILTI SI100 ELECTRIC IMPACT SCREEWDRIVER

1030 DEWALT ELECTRIC IMPACT WRENCH

1031 MAKITA ELECTRIC IMPACT WRENCH

1032 (2) MAKITA "D" HANDLE DRILL

1033 (3) ASSORTED DEWALT, MAKITA AND SKIL VSR ELECTRIC DRILLS

1034 HILTI SFH 18-A CORDLESS DRIVE DRILL WITH CHARGER AND CASE

1035 ASSORTED CORDLESS DRILLS: 1-MAKITA W/BATTERY CHARGER AND BLACK & DECKER W/OUT BATTERY CHARGER(LOT)

1036 CP AIR HAMMER W/CHISELS AND EXTRA PIECES

1036A (2) ASSORTED DAYTON AIR RACHET AND DRILL

1036B (2) ASSORTED AIR WRENCH

1037 CHICAGO PNEUMATIC CP797 AIR WRENCH

1038 (2) PNEUMATIC GOOSE NECK CHIPPING HAMMER

1039 TXIB-LTNS-MK NEEDLE SCALER KIT

1040 (2) JONNESWAY MODEL : JAH-6836 NEEDLE SCALER

1041 ASSORTED LARGE COMBINATION WRENCHES , SOCKETS AND RATCHET WRENCH SET(LOT)

1042 ASSORTED NUT DRIVERS AND SCREWDRIVERS(LOT)

1043 10-HOSE REPAIR AND ASSEMBLY KIT(LOT)

1044 JET BODY REPAIR KIT, 10 TON CAPACITY MODEL: BRK-10T, S/N: 13052643

1045 (2) 6" DRILL PRESS VISE

1046 HITACHI B16RM 15" DRILL PRESS, #3354144

1047 2012 KING INDUSTRIAL 12 SPEED 22" FLOOR MODEL DRILL PRESS MODEL KC-122FC, CHUCK 3/4, S/N: 517269

1048 30 TON CAROLINA CP-100 HYDRAULIC H-FRAME PRESS, S/N: 6772

1049 20 TON NORCO STANDARD SHOP HYDRAULIC PRESS

1050 WILTON 7 X 12 HORIZONTAL/VERTICAL BAND SAW MODEL 3410, S/N: 05069975

1051 33" X 61 1/2" HEAVY DUTY WORK TABLE WITH 6" & 8" BENCH VICES

1052 ASSORTED GRINDER WHEELS, SAW BLADE, ABRASIVE CUTT-OFF WHEELS AND BRUSH WHEELS(LOT)

1053 ASSORTED 5 GRIP VISES(LOT)

1054 ASSORTED "C" CLAMPS(LOT)

1054A (5) BAR CLAMPS

1054B ASSORTED 3 - ALUMINUM PIPE WRENCH : 2- 36" AND 1-24"

1055 (6) ASSORTED PIPE WRENCHES

1056 ASSORTED 13 MALLETS AND SLEDGEHAMMERS(LOT)

1057 ASSORTED HAND TOOLS, STEEL STAMP, MAGNETIC FLOOR SWEEPER AND CRAFTMAN TOOL BOX.(LOT)

1058 BEVEL-MILL MODEL: 8000 S/N: 6997

1059 37" X 121" WORKBENCH (METAL FRAME W/WOOD TOP) WITH UNDER TOP SMALL PARTS BOXES

1060 DAVIS WHITE LT6-900 LEVEL-TRANSIT S/N: D106605 WITH ACCURATE SURVEY TRIPOD AND STICK

1061 ACCLINE PRO LASER LEVELS, SELF LEVELING, FIVE-BEAM LASER POINTER #40-6680

1062 ASSORTED LEVELS, T-SQUARES AND 200' & 300' STEEL MTAPE(LOT)

1063 HYDRO ENGINEERING 5/3GHOH-S, PRESSURE WASHER/STEAM CLEANER, S/N: 97070019, PUMP TS2021, KOHLER 18 HP GASOLINE ENGINE

1064 DOUBLE END GRINDER W/TABLE

1065 ASSORTED HARDWARE, SMALL PARTS CABINET AND (2)-1 WITH 18 & 1-WITH 12 BIN CABINET PLUS CONTENT

1066 CONTENT OF THE MEZZANINE: ASSORTED FILTERS, HARDWARE, BELTS, HOSES, LIGHTS, SEALS, ETC.(LOT)

1067 RYOBI ELECTRIC PRESSURE WASHER 1700 PSI

1068 HUSQUARNA MODEL: 020490 GASOLINE ENGINE PORTABLE PRESSURE WASHER, S/N:1019514143

1069 PARTS WASHER

1070 JUSTRITE FLAMMABLE STORAGE CABINET, 60 GAL. CAPACITY.

1071 ASSORTED AIR TANK, TIRE CHANGER TOOLS, BEAD SEATER AND 2 TRUCK BRAKE POTS

1072 HONDA BLACK MAX 7000 RUNNING WATTS , 8750 STARTING WATTS, PORTABLE GAS POWERED GENERATOR W/ELECTRIC START

1073 HONDA BLACK MAX 7000 RUNNING WATTS , 8750 STARTING WATTS, PORTABLE GAS POWERED GENERATOR W/ELECTRIC START

1074 CUB CADET 71024C POWER STEERING SNOWBLOWER

1075 324 GAL. TANK WITH 77 GAL. OF OIL, HOSE REEL AND HOSE W/AMERICAN DIGITAL READER

1075A FILL-RITE MODEL: FR305 PUMP & METER CABINET WITH 2- FUEL NOZZLE

1076 1 1/2 TON LEVELER CHAIN HOIST

1077 1 1/2 TON CM SERIES 653 HAND OPERATOR LEVELER CHAIN HOIST

1078 VITAL 2 TON CHAIN HOIST

1079 GUARDIAN FALL PROTECTION MK EDGE SERIES RETRACTABLE LIFELINE, S/N:202286

1079A GUARDIAN FALL PROTECTION MK EDGE SERIES RETRACTABLE LIFELINE, S/N:200797

1080 MIGHTY LITE SELF-RETRACTING LIFELINE, MODEL: RL30/30', SD/N: 07827D

1081 REBEL PROTECTA SELF-RETRACTING LIFELINE MODEL: 3590560, S/N: 074737

1082 REBEL PROTECTA SELF-RETRACTING LIFELINE MODEL: 3590560, S/N: 075467

1083 DAYTON BIG BLOCK SELF-RETARCTING LIFELINE

1084 MSA APTURA LT30 SELF-RETRACTING LIFELINE

1085 MSA APTURA LT30 SELF-RETRACTING LIFELINE

1086 GUARDIAN FALL PROTECTION EDGE SERIES RETRACTABLE LIFELINE S/N: 54486

1087 MIGHTY LITE SELF-RETRACTING LIFELINE MODEL: RL20G/20FT.

1088 (2) SAF-T-CLIMB LADDER FALL PREVENTION SYSTEM STC-000

1089 (3) CROSBY IP LIFTING CLAMP MODEL: 1PHTONZ CAP. 1.5 TON

1089A

1089B RENFROE LIFT CLAMP S/N: 0713477 (3 TON CAPACITY

1089C RENFROE LIFT CLAMP S/N: 0713479 ( 3 TON CAPACITY

1090 LIFT CLAMP

1091 RENFROE VERTICAL LIFT CLAMP MODEL: TLA S/N: 07281, CAP. 1 TON, PLATE THICKNESS 0-3/4

1092 VERTICAL LIFT CLAMP 1 TON CAPACITY

1093 VERTICAL LIFT CLAMP

1094 (6) RENFROE LIFT CLAMP REAPAIR KIT

1095 (2) BLACK & DECKER AND RYOBI 3" X 21" ELECTRIC BELT SANDER

1096 ITW PASLODE MODEL 5325/80S PNEUMATIC NAILER

1097 (4) AIR ORBITAL SANDER/GRINDER

1098 ASSORTED 1-HILTI HDM 500 MANUAL ADHESIVE GUN AND 3-CAUKING GUNS(LOT)

1099 7 GREASE GUNS

1100 CADET MANUFACTURING MODEL CGH402 MOVABLE AIR HEATER

1101 ASSORTED SHOP LIGHTS(LOT)

1102 NIKOTA 3500 WATT, 6.5 HP, OHV ENGINE ELECTRIC GENERATOR

1103 (3) ASSORTED SHOP-VAC WET?DRY VACUUM

1104 SOLAR OCTANE SERIES 056110 BATTERY CHARGER

1105 HYPERTHERM POWERMAX 1000 G# SERIES PLASMA CUTTER #083169, S/N: 1000-043221

1106 LINCOLN ELECTRIC IDEALARC R3R-400 WELDER S/N: 11342 U1070310460




1110 4 PACK SETUP RACK WITH ELECTRIC PANEL














1124 LINCOLN ELECTRIC INVERTEC V350-PRO WELDER S/N: U1061111755




1128 ASSORTED 3 PACK AND 4 PACK SETUP RACKW/1-480 V INVERTER ELECTRIC PANEL








1136 LINCOLN ELECTRIC CONSTANT VOLTAGE/CONSTANT CURRENT DC/ARC WELDER MODEL: DC600, S/N: U1980215435

1137 RED-D-ARC DC 1000 CC/DC ARC WELDER WITH LINE VOLTAGE COMPENSATION 500 AMP AND 1000 AMP OUTPUT CONNECTIONS MODEL: K1386-S6, S/N: U103096110 WITH RACK WITH ELECTRIC PANEL

1138 LINCOLN ELECTRIC FLEXTEC 650 WELDER S/N: U1120907808

1139 LINCOLN ELECTRIC FLEXTEC 650 WELDER S/N: U1120907805

1140 AIRCO MODEL CV-450 AIRCOMATIC WELDING MACHINE S/N: RG905028 WITH LINCOLN ELECTRIC LN-7 WIRE FEEDER S/N: 189755

1141 MILLER WELDING MACHINE DIRECT CURRENT ARC WELDING POWER SOURCE, NAME PLATE HF839806

1142 CHICAGO BRIDGE & IRON COMPANY MODEL: CBI-400 ARC WELDING MACHINE S/N: HJ211298



1145 CHICAGO BRIDGE & IRON COMPANY MODEL: CBI-400 ARC WELDING MACHINE S/N: HK323486

1146 MILLER THUNDERBOLT XL 225/150 AMP. CC. AC/DC WELDING POWER SOURCE S/N: LF 401018Y

1147 MILLER XMT 456 CC/CV DC INVERTER ARC WELDER S/N: LE094529

1148 MILLER BOBCAT 225NT CC/CV. AC/DC 8500 WATT GENERATYOR/WELDER MULTIPURPOSE SERIE

1149 LINCOLN ELECTRIC LN-25 PRO WELDER S/N:U1120511752

1150 RED-D-ARC LN25 PRO-EXTREME WIRE FEEDER S/N: U1080113849




1154 RED-D-ARC LN25 VOLTAGE SENSING WIRE FEEDER WITH INTERNAL CONTACTOR AND GAS SOLENOID, S/N: U1030117539

1155 PHOENIX DRY ROD OVEN, ELECTRODE STABILIZING OVEN, MODEL: 16C, S/N: 10 07 4 13215

1156 CUTTING TORCH W/CYLINDER CART PLUS CUTTING ATTACHMENT AND HANDLE

1157 TIG-MATE 9, TIG-MATE 17 STARTER KIT WITH HELMET

1158 ARCAIR CUT SKILL CSK 4000 GOUGING TORCH

1159 ASSORTED CUTTING TORCH TIPS AND WELDER CABLE CONNECTORS(LOT)

1160 (5) WELDING GAS FLOW METER

1161 (6) WELDING GAS FLOW METER

1162 (5) FUEL REGULATORS

1163 (6) FUEL REGULATORS

1164 48" X 46" STEEL TABLE W/ 1/4" THICKNESS TOP

1165 4' X 8' STEEL ROLLING TABLE W/VISE, APPROX. 3/8" THICKNESS STEEL TOP

1166 (3)PHOENIX DRY ROD OVEN, ELECTRODE STABILIZING OVEN, 10 LB. CAP.

1167 ASSORTED WELDING ELECTRODES (LOT)

1168 ASSORTED WELDING WIRES (LOT)

1169 GRACO REACTOR E-XP1 ELECTRIC SERIES PLURAL COMPONENT PROPORTIONER, PART #246024, SPRAY FOAM SYSTEM

1170 GRACO XTREME X70 SPRAYER W/HEAVY-DUTY CART & HOSE W/SPRAY GUN, SERIES E14B, S/N: A8173

1171 GRACO XTREME X70 SPRAYER SERIES H14B, S/N: 8463

1172 GANTRY CRANE WITH COFFING 1.5 TON CHAING HOIST

1173 (2) RIDGID RJ-98 ROLLER HEAD LOW PIPE STAND, 2500 LBS. CAP.

1174 (5) RIDGID VJ-99 PIPE ADJUSTABLE STAND, 2500 LBS. CAP.

1175 7 ASSORTED JACK STAND

1176 14 ASSORTED HYDRAULIC BOTTLE JACKS

1177 22 TON AIR/HYDRAULIC BOTTLE JACK

1178 3 FLOOR JACKS

1179 1998 GARDNER DENVER ELECTRA-SCREW AIR COMPRESSOR W/AIR RECEIVING TANK, MODEL EBE 991, S/N:501518, PSIG 125, VOLT 460, HZ 60, HP 30 , 2460 HOURS

1180 INGERSOLL RAND 750 PORTABLE AIR COMPRESSOR, PSI 125, ENGINE CUMMINS DIESEL 6 CTA8.3C, ELECTRIC STARTING. S/N: XP750 WCU/1997/C/SYSTEM 24 VOLTS, 9287 HOURS

1182 2015 DOOSAN INFRACORE PORTABLE POWER, MODEL: P425/HP375WCU-T41 PORTABLE AIR COMPRESSOR, S/N:467132UIYF15.

1183 IR INGERSOLL RAND 15 HP AIR COMPRESSOR, PH 3, RPM 1775, TYPE DP, MODEL 7100, S/N: NAR10011976 W/120 GAL. CAP. TANK AND PORTABLE RACK

1184 IR INGERSOLL RAND 15 HP AIR COMPRESSOR, PH 3, RPM 1775, TYPE DP, MODEL 7100, S/N: NAR10011875 W/120 GAL. CAP. TANK AND PORTABLE RACK

1185 DAYTON AIR COMPRESSOR WITH KOHLER 10 GAS ENGINE, RECEIVING TANK AND PORTABLE RACK

1186 HILLES & JONES COMPANY WILMINTON DELAWARE MANUAL HOLE PUNCH

1187 RED-D-ARC POWER DISTRIBUTION PANEL MODEL: DP 225, S/N: 9723E-6, ENC.3, AMPERE 225, PRIMARY VOLTAGE 600-480,

SECOND VOLTAGE:240-120, HERTZ 60, PHASE 3.

1188 RED-D-ARC POWER DISTRIBUTION PANEL MODEL: DP 225, S/N: QC85991, AMPERE 200, PRIMARY VOLTAGE 600, HERTZ 60, PHASE 3.

1189 RED-D-ARC POWER DISTRIBUTION PANEL MODEL: DP 225, S/N: 1027B-5, ENC. 3, AMPERE 225, PRIMARY VOLTAGE 600-480, HERTZ 60, PHASE 3.

1190 RED-D-ARC POWER DISTRIBUTION PANEL MODEL: DP 225, S/N: QC-842915, AMPERE 200, PRIMARY VOLTAGE 600, HERTZ 60, PHASE 3.

1191 POWER DISTRIBUTION PANEL

1192 NESCO POWER DISTRIBUTION PANEL MODEL5024 H, S/N: 161 13

1193 ENVIRO VAULT THE FUTURE STANDARD TANK DESIGN S/N: 11488

1194 (3) ASSORTED HAND TRUCK

1195 (3) ASSORTED HAND TRUCK

1196 RIDGID 300 PIPE THREADER MACHINE W/DIES & CUTTER

1197 RIDGID 300 PIPE THREADER MACHINE , RIDGID ROLLER HEAD STAN, TOLEDO #6 TRIPOD PIPE VISE AND RIDGID 4P-J DIE(LOT)

1198 WELDING CART W/VISE, DAYTON 27152C SPEED REDUCER C-FACE AND DOLLIES

1199 ASSORTED HYDRAULIUC LIFT AND DRUM LIFT ATTACHMENT

1200 ASSORTED WHEELBARROW, ACCESSORIES FOR LIFTING, SHOVELS. (LOT)

1201 21'FT. DIAMETER X 16'FT. H. STORAGE CONTAINER TANK WITH CONTENT: TIRES, CABLES, GREASE PUMP, C CLAMPS, SLEGEHAMMER, CHAIN, SHOVELS, OIL SPILL CONTAINER WITH WHEELS, ETC.

1202 STORAGE CONTAINER W/CONTENT, APPROX. 12'FT. DEEP X 7' W X 7'H

1203 USE OIL TANK

1204 OUT

1205 OUT

1206 FORD 4000 TRACTOR WITH FROM BUCKET W/SERVIS H.D. BIG RHINO SCRAPER

1207 BUCKET TRACTOR ATTACHMENT

1208 KW-DART 10 TON CAPACITY ROUGH TERRAIN LIFT TRUCK

1209 1990 KENWORTH MODEL T600 ST-15, TANDEM AXLE TRUCK TACTOR, VIN:1XKAD29X7LS534632 WITH SLEEPER, 674626 MILES

1210 1990 MACK MODEL CH613, TANDEN AXLE TRUCK TRACTOR, VIN: 1M2AA06Y9LW001353, 204633 MILES

1211 2001 MACK MODEL CX613, TANDEN AXLE TRUCK TRACTOR, VIN: 1M1AE07Y01W007420, 845570 MILES

1212 TRAILER JOCKEY, YARD MULE TRUCK

1213 STRONG MANUFACTURING MIXER

1213A 2002 FORD EXPLORER EDDIE BAUER SPORT UTILITY VEHICLE LEATHER INTERIOR, V8 GAS ENGINE, VIN: 1FMZU64W72ZC49404

1214 2008 FORD MODEL F350 LARIAT KING RANCH, PICKUP TRUCK, CREW CAB, 4 X 4, 6.4L V8 DIESEL ENGINE, LEATHER, NAV, 242,790 MILES, VIN: IFTWW31R78EC36554

1215 2004 FORD SD F350 4 X 4 SUPERCAB LARIAT 158" WB STYLESIDE 6.0L V-8 DIESEL, 6-SPD MANUAL DSL O/D-HD TRA, EXTERIOR ARIZONA BEIGE CLEARCOAT MET INTERIOR, VIN: 1FTSX31PX4ED19979, 171818 MILES

1216 2001 FORD MODEL F350XLT, PICKUP TRUCK, EXTENDED CAB, 4 X 4, 6.0L POWER STROKETURBO DIESEL ENGINE, 253,474 MILES, VIN: 1FTSX31F21ED50727

1217 2000 FORD MODEL F250XLT, PICKUP TRUCK, EXTENDED CAB, 4 X 4, 5.4L GAS ENGINE, VIN: 3FTNX21L1YMA64207, MILES :438,736

1218 1998 FORD MODEL F150XLT, PICKUP TRUCK, EXTENDED CAB, 2WD. MANUAL TRANSMISSION, V8 TRITON GAS ENGINE, VIN:1FTZX1763WKC25836, 301,936 MILES

1219 1998 FORD MODEL CLUB WAGON VAN, 3 BENCH SEATS, V10 TRITON GAS ENGINE, VIN: 1FBSS31SOWHA94478, 233,243 MILES

1220 NAVISTAR 1999 INTERNATIONAL SCHOOL BUS PU-109, 165477 MILES, VIN: 1HVBDABM1XH664784

1221 1989 KENWORTH MODEL T600, TANDEN AXLE TRUCK TRACTOR, WITH 42" SLEEPER, 534024 MILES, VIN:1XKAD29X6KJ519804

1222 1994 45'FT. FLATBED TRAILER TANDEN AXLE, STEEL FRAME, WOOD DECK, MODEL: DOTS 45, VIN:1DTP16W22SPO36409

1223 2004 EAGLE UTILITY TRAILER TYPE ENCLOSED APPOROX. 83" X 144" X 76" H.

1224 1998 HMDE 16' UTILITY TRAILER, VIN: NM160993

1225 2006 18'UTILITY TRAILER LIC. PLATE 81503TRH VIN: 16VCX182561E25406

1226 2003 START 16' UTILITY TRAILER VIN:13YFS16293C090611

1227 2002 START 16' UTILITY TRAILER VIN:13YFS16262CO88538

1228 TRAILER SINGLE AXLE WITH 500 GALLON CAPACITY & HAEI PUMP MODEL 25FB-B25 S/N: 10831AM(NON-PORTABLE WATER)

1229 1989 KENWORTH MODEL T600A, 14-TON CAPACITY BOOM CRANE TRUCK VIN: 1XKAD29X4KS525837 WITH NATIONAL CRANE MODEL 1400JBT, S/N: 4844374, 36,514 MILES

1230 HOBBS TRAILER DIVISION, 45' FT. FLATBED TRAILER, TANDENAXLE STEEL FRAME, WOOD DECK, VIN: 1H5P04524FN004025

1231 45' FT. L. DROP DECK FLATBED TRAILER, TANDEN AXLE, STEEL FRAME, WOOD DECK

1232 WITZCO CHALLENGER 50-TON CAPACITY GOOSENECK LOWBOY TRAILER, TRIPLE AXLE, STEEL FRAME, WOOD DECK

1233 1987 16'FT. UTILITY TRAILER VIN: OTCT25444427227

1234 1993 UTILITY TRAILER VIN: 4JCUT1222PM002376

1235 1995 STARTLIKE FT-C6 UTILITY TRAILER VIN: 13YFS1224SC058492

1236 1980 PULLMAN TRAILMOBILE 45' FT. FLATBED TRAILER, MODEL: F71T-OSAI, S/N: V65197, VIN: V65197

1237 FORD S50 LOADER/BACKHOE, HOURS: 6787

1238 1997 LEROI 375 PORTABLE AIR COMPRESSOR MODEL Q375DKF, 375 CFM, FLUID CAPACITY: FUEL TANK 50 GAL. HOURS 4804

1239 PORTABLE LINCOLN ARC WELDER, SHIELD-ARC SA-250 VARIABLE VOLTAGE DC ARC WELDING POWER SOURCE, HOURS 1709, MODEL SA-250-D#-152, S/N: A969020

1240 5-CABLE STREIGHTENER HEADACHE BALL CRANE AND 1-CRANE LOAD BLOCK

1241 3 DIESEL SERVICE TANK WITH SPILL CONTAINER & PUMP

1242 3 DIESEL SERVICE TANK WITH SPILL CONTAINER





1247 MOBILE IBC CAN/CG SB 43.146-2002, YEAR 2012, CAP. 1020L. CAN/WESTEEL 4-508 ROAD VAULT PORTABLE SERVICE TANK

1248 SERVICE DIESEL TANK WITH SPILL CONTAINER

1249 SERVICE DIESEL TANK WITH SPILL CONTAINER

1250 PORTABLE FUEL SERVICE TANK




1254 (2) PORTABLE FUEL SERVICE TANK


1256 PORTABLE LINCOLN ARC WELDER, SHIELD-ARC SA-250 VARIABLE VOLTAGE DC ARC WELDING POWER SOURCE, HOURS 1709, MODEL SA-250-D#-152, S/N: A1029687

1257 LINCOLN PORTABLE WELDER MODEL A-200, S/N: 842382, HOURS 1516

1258 ASSORTED SCAFFOLDING BRACKETS

1259 APPROX. 32" X 69" PERSONNEL BASKET






1265 53" X 53" CYLINDER LIFTING DEVICE

1265A 53" X 53" CYLINDER LIFTING DEVICE

1266 7' H X 87" W X 13' DEEP STORAGE CONTAINER

1267 STI STEEL TANK INSTITUTE S/: FS001066 FLAMESHIELD FUEL SERVICE TANK (GASOLINE) WITH PUMP AND READ OUT

1268 STI STEEL TANK INSTITUTE S/: 022165 FLAMESHIELD FUEL SERVICE TANK (DIESEL) WITH PUMP AND READ OUT

1269 FUEL (DIESEL) PORTABLE SERVICE TANK WITH PUMAND SPILL CONTAINER

1270 SHIPPING & STORAGE CAGE APPROX. 150" LENGTH X 30" X 28 1/2"

1271 WARNER CAT PORTABLE GENERATOR MODEL C9-230AG, S/N:X3R0032, XQ230-C9 GENERATOR SET, ENCLOSURE S/N:E-23 BZWKM

1272 CATERPILAR GENERATOR MODEL: SR-4, S/N: 9EF01109, SKID-MOUNTED

1273 1998 CATERPILAR GENERATOR , SET ENGINE MODEL 3306, S/N: 9NR03202 , SKID-MOUNTED

1274 CATERPILAR GENERATOR, GENERATOR SET 3306 ENGINE MODEL, GENERATOR SR4, S/N:6D000453, SKID-MOUNTED

1275 GENERATOR CUMMINS DIESEL ENGINE, SKID-MOUNTED

1276 CATERPILAR GENERATOR MODEL: SR4, S/N: 9AB05362, SKID-MOUNTED

1277 CATERPILAR GENERATOR , SKID-MOUNTED

1278 CATERPILAR GENERATOR MODEL SR4, S/N: 6YR00601, SKID-MOUNTED

1279 CATERPILAR GENERATOR 3116 ENGINE, S/N: INJ00566, SKID-MOUNTED

1280 CATERPILAR GENERATOR MODEL SR4, S/N: 5CA04807, SKID-MOUNTED

1281 CATERPILAR GENERATOR SET 3306 ENGINE MODEL 3306B DI , S/N:85708693 , SKID-MOUNTED

1282 LIMA GENERATOR WITH HERCULES 6-CYLINDER ENGINE S/N: D48DOT, SKID-MOUNTED

1283 1995 GREAT DANE 48' FT. VAN TRAILER, TANDEN AXLE, SWING DOORS, VIN:1GRAA962555001902 WITH CUMMINS GENERATOR MODEL: 12HDKCD-2209C, S/N: J080213605 AC VOLTS 120/240V,AMP 50, FUEL DIESEL, PHI, KW12, RPM

1284 1999 53'FT. UTILITY COMM. TRAILER, TYPE SEMI TRAILER VS2R, VIN: IUYVS2532XU042124.

1285 1980 AZTEC PRODUCTS 45'FT. FLAT BED TRAILER W/ 20'FT. CONTAINER

1286 MARKLIFT 62 MAN LIFT 62'FT. S/N: 1085M2357, RATE CAPACITY 700, 7016 HOURS.

1287 1995 INGERSOLL-RAND VR-908 , 9,000 LBS. CAPACITY, ROUGH TERRAIN LIFT TRUCK, S/N:5399, DIESEL , HIGH LIFT, 10024 HOURS

1288 1997 INGERSOLL-RAND VR-908 , 9,000 LBS. CAPACITY, ROUGH TERRAIN LIFT TRUCK, S/N:149564, DIESEL , HIGH LIFT

1289 CASE 586G, 6,000 LBS. CAPACITY, ROUGH TERRAIN LIFT TRUCK, S/N:JJG0290401, DIESEL

1290 CATERPILAR 18,000 LBS. CAPACITY FORK LIFT, MODEL: B18, S/N: 77R102, DIESEL

1291 1998 CLARK C500Y-135, 13,500 LBS. CAPACITY, and DIESEL LIFT TRUCK S/N: 88080003, 8'FT. FORKS.

1292 1988 CLARK C500Y-135, 12,500 LBS. CAPACITY, DIESEL LIFT TRUCK, S/N:Y1015-109-70, 108" FORKS, 8165 HOURS.

1293 ASSORTED 4 RACKS WHIT FLAT STEEL, EXPANDED METAL,TUBING REMS, CHANNELS, PIPES, ETC.(LOT)

1294 STRUCTURAL STEEL RACK WITH STRUCTURAL STEEL

1295 DOUBLE SIDE STRUCTURAL STEEL RACK WITH STRUCTURAL TUIBING

1296 DOUBLE SIDE STRUCTURAL STEEL RACK WITH STRUCTURAL ANGLES AND FLAT

1297 DOUBLE SIDE STRUCTURAL STEEL RACK WITH STRUCTURAL STEEL

1298 DOUBLE SIDE STRUCTURAL STEEL RACK WITH STRUCTURAL STEEL FLAT & CHANNELS

1299 STRUCTURAL STEEL RACK WITH STRUCTURAL METAL

1300 ASSORTED STRUCTURAL DOUBLE SIDE RACK AND RACK WITH STRUCTURAL METAL

1300A STRUCTURAL STEEL RACK

1300B 3 SECTION OF ROLLER CONVEYOR APPROX. 31 3/4" W.

1301 CUSTOM MADE STORAGE CONTAINER (APPROX. 5' X 4' X 28" DEEP) WITH CONTENT: ELECTRIC CORDS, WELDER CORDS AND HOSES.

1302 3 ASSORTED SHIPPING/STORAGE BOXES

1303 KNAACK 89 STORAGE MASTER CHEST W/CONTENT

1304 KNAACK 60 JOBMASTER CHEST WITH CONTENT

1305 APPROX. 36" X 94" X 48" DEEP CUSTOM MADE SHIPPING /STORAGE BOX

1306 APPROX. 36" X 94" X 48" DEEP CUSTOM MADE SHIPPING /STORAGE BOX

1307 JOBOX MODEL 1-682990



1309A GREEN LEE SLANT TOP BOX 36"/48" X 60"L X 30"W

1309B (2) GREEN LEE STORAGE BOX

1310 CUSTOM MADE SHIPPING/STORAGE CONTAINER(APPROX. 48"L. X 36"W X 48"D



1313 CUSTOM MADE SHIPPING/STORAGE CONTAINER(APPROX. 24"H. X 39 1/2"W X 28"D

1314 CUSTOM MADE SHIPPING/STORAGE CONTAINER(APPROX. 33" X 127" X 32" DEEP)

1315 CUSTOM MADE SHIPPING/STORAGE CONTAINER(APPROX. 18" X 48" X 12" DEEP)

1316 CUSTOM MADE STORAGE BOX WITH CONTENT(APPROX. 31" X 64" X 15 1/2" DEEP

1317 CUSTOM MADE STORAGE BOX (APPROX. 33" X 60" X 31 1/2" DEEP.

1318 (4) CUSTOM MADE STEEL CONTAINER

1319 ASSORTED 3-TRUCK TOOL BOX AND 1-BBQ GRILL(LOT)

1320 ASSORTED 4 - STEEL STORAGE CONTAINER, WOOD CRATE, 2-SKID WITH CONTENT(LOT)

1321 (9) CUSTOM MADE STEEL STORAGE CONTAINER WITH CONTENT

1322 (6)CUSTOM MADE STEEL STORAGE CONTAINER

1323 ASSORTED STRUCTURAL STEEL: FLAT, I BEAMS, TUBING, GRATING. ETC.(LOT)

1324 STORAGE CONTAINER (OUTSIDE DIMENSION 8' W X 8'H X 20'L)

1325 (20) CUSTOM MADE TORCH BOTTLE RACK

1326 40'FT. STORAGE CONTAINER WITH CONTENT: WELDING HELMET, XTREME GOUGING TORCH, ROPES, SUMMERGIBLE PUMP, ROLLING HEAD STAND, BAR CLAMPS, LIFTING ACCESSORIES, ETC.

1327 APPROX. 14.5L X 6'H X 7'W STORAGE CONTAINER WITH CONTENT: OFFICE FURNITURE

1328 APPROX. 14.5L X 6.5'H X 7.5'W STORAGE CONTAINER WITH CONTENT: ASSORTED CABLES

1329 APPROX. 14.5L X 6'H X 7.5'W STORAGE CONTAINER WITH CONTENT: EXTENSION LADDER, LADDERS FAN, CVABLES , SPRAY PAINT POT, ETC.

1330 APPROX. 14.5L X 6.5'H X 7.5'W STORAGE CONTAINER WITH CONTENT: HOSES, FAN, GENERATOR, VACUUM CLEANER.

1331 APPROX. 15'L X 6'H X 7'W STORAGE CONTAINER WITH CONTENT: ASSORTED HOSES

1332 APPROX. 12'L X 6'H X 7'W STORAGE CONTAINER WITH CONTENT

1333 APPROX. 10'L X 6'H X 6.5'W STORAGE CONTAINER WITH CONTENT: HOSES, ELECTRIC CORDS, ELECTRIC BOXES, ETC.

1334 APPROX. 12'L X 6'H X 7'W STORAGE CONTAINER WITH CONTENT: WELDING HOSE AND CABLES

1335 APPROX. 12'L X 8'H X 8'W STORAGE CONTAINER

1335A SCAFFOLDING BINDERS

1336 APPROX. 12'L X 6'H X 7'W STORAGE CONTAINER WITH CONTENT: VACUUM CLEANERS, PROPANE CYLINDERS, WELDING ELECTRIC CORDS, WIRES, ETC.

1337 40'FT. STORAGE CONTAINER(EMPTY)

1338 40'FT. STORAGE CONTAUINER WITH CONTENT: ASSORTED HARDWARE, WIRE GRINDER WHEELS, ETC.

1339 20'FT. STORAGE CONTAINER: 3-DRY ROD OVEN, PORTABLE COMPRESSOR, TWECO PROFESIONAL 400 AMP TWECOTON ELECTRODE HOLDERS, GRINDER WHEELS, FIRST AID KIT, ETC.

1340 SCAFFOLDING WOOD (LOT)

1341 1999 TEREX RT-230 30 TON CAPACITY ROUGH TERRAIN CRANE, S/N: 11048, SWING CAB, 94' MAIN BOOM, 137' MAXIMUM BOOM LENGTH, 130 HP ENGINE, $ SPEED TRANSMISSION, 20.54 X 25-26 PR TIRES, 10,000 LB. MAXIMUM C

1342 1998 TEREX RT-230 30 TON CAPACITY ROUGH TERRAIN CRANE S/N:10557 SWING CAB, CUMMINS DIESEL ENGINE, HOURS: 8297

1343 1994 LORAIN LRT-230E 30-TON CAPACITY ROUGH TERRAIN CRANE S/N: 80201, SWING CAB, HOURS: 9301.9

1344 1990 LORIAN LRT-275D 27.5-TON CAPACITY ROUGH TERRAIN CRANE S/N: 79948, SWING CAB, HOURS: 5730

1344A 1989 LORIAN LRT-275D 27.5-TON CAPACITY ROUGH TERRAIN CRANE S/N:79759, SWING CAB, HOURS: 1207

1344B 1949 BUCYRUS-ERIE 54B 70-TON CRAWLER CRANE S/N: 72814 WITH LETTICE BOOM (MOUNTED IN PIT OUTSIDE)

1345 STORAGE CONTAINER APPROX. 5' X 6' X 8'

1346 STORAGE CONTAINER APPROX. 16'X 8'X7" WITH CONTENT: JOB SITE OFFICE FURNITURE

1347 STORAGE CONTAINER APPROX. 16'X 8'X7" WITH CONTENT: JOB SITE OFFICE FURNITURE

1348 FREE STANDING SILO WITH STORAGE BIN(6'X10')

1349 STORAGE TANK WITH CONTENT: TIRES AND MISC. MAINTENANCE EQUIP.(LOT)

1350 MISC. SCAFFOLDING AND PLANKS(LOT)

1350A ASSORTED METAL(LOT)

1351 STORAGE CONTAINER (APPROX. 28'L X 10'W X 8'H WITH CONTENT: LADDER AND REPAIR PARTS.

1351A ASSORTED TANKS MAN WAY & STEP WAYS (LOT)

1352 SCISSOR LIFT (12' X 6')

1353 MISC. AGGREGATE PRODUCTS(7 PALLETS)(LOT)

1354 PERSOLITTE AGGREGATE & MISC. SANDBLASTING SAND (14 PALLETS)(LOT)

1355 MISC. WELDING FLUX (4 PALLETS)

1356 (3) MAT JACKS

1357 LINDSAY SMALL SANDBLASTING POT, MFG. S/N & NATL BD 32201

1358 CLEMCO MODEL: 2452 SANDBLASTING POT, CAP. 600 LB.)

1359 CLEMCO MODEL: 2452 SANDBLASTING POT CAP. 600 LB.)

1360 SANDBLASTING POT (CAP. 600 LB.)

1361 SANDBLASTING POT (CAP. 600 LB.)

1362 NAT'L BD MODEL 3954 SAND PIOT 600 CAP. YEAR 1985

1363 600 CAP. SAND POT WHITE

1364 SAND POT (RED COLOR )

1365 SAND POT ( GRAY COLOR )

1366 SAND POT ( WHITE COLOR ) YEAR 1970 NATL.BD # 484568

1367 SAND POT ( WHITE COLOR )

1368 SAND POT (GRAY COLOR )

1369 NAT'L BD 1182 MODEL 12 CAP3KDE SAND POT

1370 SAND POT ( WHITE COLOR )

1371 SAND POT (GRAY COLOR )

1372 NAT'L BD 861, SCHMIDT MFG. INC. MODEL 6 S/N: K316 SAND POT

1373 2010 MARCO NATIONAL BOARD NB 2051, RED SAND POT S/N: M65E-358

1374 1980 SCHMIDT MODEL: 3 S/N: L.292 SAND POT, 200 CAP.

1375 2001 SCHMIDT MODEL: 3.5 CF S/N: L-7375 SAND POT, 200 CAP.

1376 1991 SANSTORM, INC. MODEL & SERIAL # 356, 125 P.S.I. AT 300 FARENHEIT, 300 CAP. SAND POT

1377 2007 MARCO S/N: S8-023 RED COLOR SAND POT

1378 PREMIUN 800 LARGE PAINT PUMP, PART # 222-800

1379 GRACO PAINT SPRAYER XTREME X70

1380 SPRAY PAINT PUMP

1381 SPRAY PAINT PUMP

1382 GRACO GRAY MEDIUM PAINT PUMP

1383 GRACO BULLDOG AIR POWERED PUMP PART# 217-579, 095 SERIES, LUFMOTOR-AIR MOTOR MODEL: 208-356

1384 BLACK MEDIUM PAINT PUMP

1385 MEDIUM PAINT PUMP


1387 GRACO AIR MOTOR MODEL: 207-647, SERIES J98L, GRAY MEDIUM PAINT PUMP

1388 GRACO WHITE MEDIUM PAINT PUMP

1389 GRACO KING GRAY MEDIUM PAINT PUMP

1390 GRACO GREEN MEDIUM PAINT PUMP


1392 RED MEDIUM PAINT PUMP

1393 GRACO AIR MOTOR MODEL: 207-352, CD2 SERIES, PUMP MODEL 207-707, SERIES D2D, SMALL PAINT PUMP.

1394 BLUE MEDIUM PAINT PUMP

1395 MEDIUM PAINT PUMP

1396 (2) DAYTON 36" FAN WITH 1/2 HP MOTOR

1397 DAYTON 36" FAN WITH 1/2 HP MOTOR

1398 DAYTON 36" FAN WITH 1/2 HP MOTOR

1399 INTERTEK MODEL LF-36MC 36" FAN

1400 (5) MISC. INDUSTRIAL FANS

1401 (3) MISC. INDUSTRIAL FANS

1402 INDUSTRIAL HEAT LAMP WITH PORTABLE STAND

1403 (5) ASSORTED HEATERS AND MISC. PAINTING TOOLS

1404 (4) COMERCIAL WEED BURNERS

1405 18' LADDER

1406 (2) 32' FIBERGLASS EXTENSION LADDER

1407 (2) 16' FIBERGLASS LADDER


1409 24' ALUMINUM EXTENSION LADDER

1410 (2) 12' FIBERGLASS LADDER

1411 (2) 24' FIBERGLASS EXTENSION LADDER

1412 (2) 12' FIBERGLASS LADDERS

1413 (2) 12' FIBERGLASS STEP LADDERS

1414 (2) 10' ALUMINUM & FIBERGLASS STEP LADDERS

1415 (3) 8' ALUMINUM AND FIBER GLASS STEP LADDER


1417 MISC. GARAGE TOOLS

1418 3-PALLETS SEALED PAINT

1419 3-PALLETS SAFETY HARNESS

1420 2-PALLETS SAFETY HARNESS

1421 PALLET ASSORTED FALL PROTECTION SELF-RETRACTING LIFE-LINE

1422 3-PALLETS WITH STRAPS

1423 3-PALLETS WITH ELECTRIC EXTENSION CORDS

1424 PALLET WITH ASSORTED AIR HOSES

1425 2-PALLETS WITH ELECTRIC EXTENSION CORDS

1426 PALLET WITH HYDRAULIC JACKS & SPLINTS

1427 2-PALLETS WITH TANK TROLLEYS, MODEL : 9900-TROLLEY6

1428 PALLET WITH MATERIAL HANDLING TOOLS: LIFT CLAMPS, STRAPS, CHAIN HOIST AND LEVER CHAIN HOIST

1429 PALLET WITH ASSORTED PUMPS

1430 PALLET WITH HEAT LAMPS

1431 PALLET WITH JOBSITE LIGTHS

1432 (2)PALLETS WITH ASSORTED HOSES

1433 PALLET WITH STRINGER LIGHTS

1434 (2)PALLETS WITH HEVY GAUGE ELECTRIC WIRE

1435 (3) PALLETS WITH WELDING LEADS

1436 (3) PALLETS WITH WELDING LEADS

1437 (3) PALLETS WITH COMPRESSOR HOSES AND HEAVY GAUGE ELECTRIC WIRE

1439 PALLET WITH FIRE EXTINGUISHERS

1440 MISC. LEADS, HOSES, CORDS AND METAL STORAGE/SHIPPING CONTAINER

1441 WELDING LEADS

1442 MISC. ELECTRIC WIRE

1443 2012 HANSEN, PAINTING TENT SYSTEM, WEATHERPORT 50'W X 120'L, BOLTED STEEL FRAME, WHITE VYNIL CANVAS COVER, DIRT FLOOR.

1444 DOLLY TRAILER FOR SANDBLASTING AND PAINT. LIC. #01305

1445 DOLLY TRAILER FOR SANDBLASTING AND PAINT. LIC. #A6542

1446 PETTIBONE MK-36 18 TON ROUGH TERRAIN CRANE W/ CUMMINS V-504-C 6 V DIESEL, # SPEED POWER SHIFT, 4 X 4. CRAB STEER, 3-PIECE BOOM 28'-64', SINGLE DRUM HOIST SYSTEM. MCKISSICK 20 TON 2-SHEAVE HOOK BLOCK.

1447 FRUEHAUF FB-EP-40, 40'L FLATBED TRAILER, S/N:FHS581817, TANDEN AXLE, STEEL FRAME WOOD DECK,(T-105)

1448 50'L DROP DECK FLATBED TRAILER, TANDEN AXLE, STEEL FRAME, WOOD DECK(LIC # 3471FTG)

1449 TRAILMOBILE P3ITOCAH 45'L FLATBED TRAILER S/N:J60492 , TANDEM AXLE, STEEL FRAME, WOOD DECK.(T-114)

1450 40' FT. L FLATBED DOUBLE AXLE TRAILER(#35)

1451 40' FT. L FLATBED DOUBLE AXLE TRAILER(#34)

1452 45' FT. L FLATBEDTRAILER, TANDEM AXLE STEEL FRAME, WOOD DECK (T-107) WITH ALMOND 8' X 20' STORAGE CONTAINER WITH CONTENT MISC. JOBSITE TOOLS

1454 48' FT. L FLATBED TRAILER TANDEM AXLE, STEEL FRAME, WOOD DECK (T-134) WITH 8' X 20' WHITE STORAGE CONTAINER WITH CONTENT MISC. JOBSITE TOOLS.

1456 49' FT. L DROP DECK FLATBED TRAILER, TANDEM AXLE, STEEL FRAME, WOOD DECK

1457 45' FT. FLATBED TRAILER TANDEM AXLE, STEEL FRAME,WOOD DECK (T-117)

1458 CUSTOM MADE PIPE TRAILER APPROX. 41'FT. L , RED LOW BOY DOUBLE AXLE TRAILER LIC. PLATE 1412FTG WITH SPARE TIRE

1459 1985 HOOB 45' FT. FLATBED TRAILER, DOBLE AXLE(T-125)

1460 45' FT. L FLATBED TRAILER TANDEM AXLE, STEEL FRAME, WOOD DECK (NO LIC.)(T-116)

1461 45' FT. L FLATBED TRAILER TANDEM AXLE, STEEL FRAME, WOOD DECK (NO LIC.)(T-120)

1461A GREAT DANE 45' FT. L FLATBED TRAILER TANDEM AXLE, STEEL FRAME, WOOD DECK (T-140)(LIC. PLATE 3469FTG

1462 40' FT. L FLATBED DOUBLE AXLE TRAILER (T-122)

1463 45' FT. FLATBED TRAILER TANDEM AXLE, STEEL FRAME, WOOD DECK (T-6)(NO LIC.)

1464 APPROX. 35' FT.FLATBED TRAILER, DOBLE AXLE(7)

1465 45' FT. FLATBED TRAILER TANDEM AXLE, STEEL FRAME, WOOD DECK, (LIC. PLATE 1416FTG)(T-124)

1466 42' FT. L DROP DECK FLATBED TRAILER, TANDEM AXLE, STEEL FRAME, WOOD DECK, LIC. PLATE 81595TRH (T-90)

1467 TIMPTE FLATBED TRAILER MODEL TT10RR 69, APPROX. 40'FT. , S/N:14978, DOUBLE AXLE, LIC. PLATE B7060

1468 ASSORTED SCAFFOLDING AND RACKING (LOT)

1469 (16) DOUBLE PULLEY SCAFFOLDING ATTACHMENT(LOT)

1470 OOSTWOUDER, 14-TON CAPACITY AUTOMATED ELECTRIC TANK JACKING SYSTEM, EQUIP. NUMBER 1022, (2008), (FOR CONSTRUCTION FROM THE GROUND OF FIELD ERECT WATER & PRETROLEUM FLAT BOTTOM & STANDPIPE TANK. JACK A

1471 MISC. STAINLESS STEEL SCRARP (LOT)

1472 MISC. SCAFFOLDING PLANKS (LOT)

1473 MISC. CABLES , ASSORTED SIZE AND LENGTH (LOT)

1474 PRE FRABRICATED STEP & MISC. SCRAP METAL (LOT)

1475 WELDING RACKS/METAL RACK W/VARIUS SPREADERS, MISC. SCRAP METALS (LOT)

1476 VARIUS METAL SCRAP/JOBSITE FUEL TANK (NORTH END TO WEST END OF YARD) (LOT)

1477 FROM 8' X 40' RED TEX CONTAINER TO WEST END OF PROPERTY-VARIUS MACHINERY & METAL SCRAP (LOT)(NOT INCLUDE 8' X 40' STORAGE CONTAINER)

1478 40' FT. L STORAGE CONTAINER RED TEX

1479 PALLET LINCOLN FLEETWELD 5P 7/32 X 18" WELDING RODS

1480 PALLET WITH 12 BOXES MCCAY CHROMAWELD 316LTI WELDING WIRE AND 8 BOXES PINNACLE ALLOYS ER347 WELDING WIRE

1481 PALLET VARIUS WELDING RODS/WIRE/FLUX

1482 PALLET LINCOLNWELD L-61 WELDING WIRE (27-BOXES)

1483 PALLET WITH LINCOLNWELD L-61 WELDING WIRE (36-BOXES)

1484 CATERPILLAR V130 FORKLIFT, VARIUS COMPRESSOR AND MACHINERY (FOR PARTS) (LOT)

1485 DOWNWARS FLOW CARTRIDGE DUST COLLECTOR 16 PORTS, VARIUS TANK SCAFFOLD

1486 ASSORTED GENERATORS AND COMPRESSORS FOR PARTS ONLY(LOT)

1487 ASSORTED GENERATORS AND COMPRESSORS FOR PARTS ONLY(LOT)

1488 20' 5TH WHEEL FLATBED TRAILER (INV.#T-26) AND 16' MULTIPURPOSE TRAILER WITH ASSORTED TIRES(LOT)

1489 FX4 OFFROAD TRUCK BED

1490 ASSORTED 20' UTILITY FLATBED TRAILER, CLARKTOR TOW TRACTOR (FOR PARTS ONLY)AND ASSORTED SCRAP METAL(LOT)

1491 ASSORTED SCISSOR LIFTS, COMPRESSOR, ENGINES FOR PARTS ONLY(LOT)

1492 ASSORTED 20' METAL WORK TABLE, 8' X 8' X 8' OPEN FACED STORAGE CONTAINER AND SCRAP METAL(LOT)

1494 40' FT. L STORAGE TRAILER (NO CONTENT)

1495 CONTENT OF THE TRAILER (LOT # 1494)16 PALLETS PERSOLITE PERLITE PRODUCT

1496 ASSORTED HEAVY GAUGE TANK WELDING PLATFORM, 40 1/2" X 48 1/2" METAL BOXES(LOT)

1497 ASSORTED PAINT STANDS AND PAINTING EQUIPMENT(LOT)

1498 27' SINGLE AXLE TANK ROLIING TRAILER

1499 32' SINGLE AXLE TANK ROLIING TRAILER

1500 38' DOUBLE ROLLER ASSEMBLY

1501 SAND POT CAP. 7 TON W/DELIVERY SILO

1502 TEX 8' X 40' STORAGE CONTAINER W/CONTENT: OFFICE FURNITURE

1503 8' X 20' ALMOND STORAGE CONTAINER

1504 8' X 20' BLUE NORDANA STORAGE CONTAINER

1505 BECKETT COMERCIAL HEATER & BLIOWER W/CAGE AND HOSES

1505A ASSORTED PAINT: SPEED CRETE RED LINE, EPOXY GROUT CARBOLINE COATINGS-LINING-FIRE PROOF, SPRAY PAINT, TABLE, ETC.

1506 8 PRE-BEND 10' X 25' X 3/8" THICK METAL SHEETS

1507 8' X 20' WHITE STORAGE CONTAINER WITH ASSORTED JOBSITE EQUIPMENT

1508 8' X 40' RED STORAGE CONTAINER

1509 CENTER WEST TO PROPERTY LINE: ASSORTED CRANE AND HEAVY LIFTING BEAMS & SYSTEM(LOT)

1510 WHITE LUKES REFRIGERATION TRACTOR TRAILER LIC.#4RH8-24 ALBERTA(APPROX. 40' FT. L), VIN: 1GRAA962211W022401

1511 PALLET 16 ESAB DUAL SHIELD LT. 70T-12H4 BOXES WELDING WIRE, 14 -HOBART ARC 71 WIRE BOXES(LOT)

1512 PALLET 50 BOXES HOBART ARC-71 WELDING WIRE(LOT)

1513 PALLET ASSORTED WELDING RODS(LOT)

1514 PALLET DOUBLE STOCK WELDING RODS(LOT)

1515 PALLET WITH ASSORTED ROD & WELDING WIRE(LOT)

1516 1999 TRAMS X REFRIGERATION TRACTOR TRAILER LINCENSE 4RH8-23 ALBERTA(APPROX.40' FT. L), VIN:1UY VS2534 XUO422 23

1517 8' X 13' MOBIL OFFICE.BLUE & WHITE

1518 8' X 21' GRAY FUEL TANK

1519 8' X 22' BROWN FUEL TANK

1520 ASSORTED MISC. SCRAP METAL: JOB #30701 & 30701-2

1521 RAVEN 5,000 8' X11' VERTIVAL F.G.

1522 6' X 10' FIBERGLASS TANK

1523 6' X 16' FIBERGLASS TANK

1524 10' X 15' WHITE TANK

1525 7' X 28' TANK

1526 7' X 21' TANK

1527 7' X 28' YELLOW TANK

1528 ASSORTED SCRAP METAL (LOT)

1529 8' X 20' SINGLE AXLE TRAILER FRAME WITH TIRES

1530 (3) 12' X 20' HEAVY DUTY METAL PLATFORMS

1531 10' X 16' UNFINISHED METAL TANK

1532 30' TANK TRAILER DOUBLE ROLLER

1533 6-30' X 12" I BEAMS AND 2- 8' METAL SAW HORSES(LOT)

1533A APPROX 40" X 96" H.D. ROLLING TABLE W/VISE AND 18" X 72" STEEL TABLE

1534 SAND POT CAP. 7 TON W/DELIVERY SILO

1535 10' X 18' ROUND STORAGE CONTAINER WITH THERMAL INDUSTRIAL COMPRESSOR #6083

1536 12' X 12' GRAY METAL BURN TABLE

1537 8' X 30' GREEN METAL BURN TABLE

1538 7' X 24' GRAY METAL BURN TABLE

1540 (2) METAL JOBSITE BOXES 4' X 8'

1541 8' X 24' ROLL UP DOOR CONATINER WITH JOBSITE MAT

1542 BLUE 12' EXT. BOOM

1542A 2' X 4' HEAVY DUTY LIFT CAGE

1543 RED 22', 7,600 LB MAX. CAP. SPREADER

1544 YELLOW 13', 1055 LB. MAX. CAP. SPREAD WITH 4 SHEET CLAMPS

1545 10' YELLOW SPRADER W/2-SHEET CLAMP

1546 GRAY 20' SPREADER WITH 2 SHEET CLAMPS

1547 PINK 13' SPREADER W/2- SHEET CLAMPS

1548 YELLOW 27' , 5,808 LB. MAX. CAP. SPREADER

1549 YELLOW 13' DOUBLE SIDED SPREADER

1550 RED 17' SPREADER

1551 WHITE ADJUSTABLE 12' SPREADER

1552 (3) 11' SPREADER

1553 10' RED SPREADER

1554 14' SPREADER

1555 6' X 14' FOUR SIDED SPREADER

1556 6' X 10' FOUR SIDED SPREADER WITH 4 HOOKS AND CABLES ATTACHED

1557 4' X 7' FOUR SIDED SPREADER

1557D 16' X 56' SECURITY MOBIL HOUSE AND 3-STORAGE SHED

1557A 20' STORAGE CONTAINER

1557B OUT

1557C 20' STORAGE CONTAINER

1558 (3) PAIR 4' SAW HORSES

1559 (5) PAIRS ASSORTED SIZES SAW HORSES



1562 ASSORTED FLAT METAL & PIPE (LOT)

1563 ASSORTED FLAT METAL & PIPE (LOT)

1564 ASSORTED FLAT METAL (LOT)



1567 ASSORTED STAINLESS AND METAL(LOT)

1568 ASSORTED STEEL BEAMS (LOT)

1570 ASSORTED WELDERS AND OTHER MACHINERY FOR PARTS ONLY(LOT)

1571 ASSORTED EQUIPMENT & SCRAP METAL(LOT)



1574 (4) JOBSITE SELF DUMP HOPPER

Documents

BMT Tank - s3.serverdata.coms3.serverdata.com/ · 77 lot -saw blades 78 (2) 7 1/4'' skilsaws 79 (2) 7 1/4'' skilsaws 80 dewalt portable bandsaw 81 dewalt recip saw 82 partner k700