Upload
carl-j-wilkey
View
202
Download
6
Embed Size (px)
DESCRIPTION
Guide to bluing firearms.
Citation preview
Bluing SuppliesWorld’s Largest Supplier of Firearms Accessories and Gunsmithing Tools™
200 S. Front St. Montezuma, IA 50171800-741-0015 or 641-623-4000 • www.brownells.com
Brownells”FIRST STEP” BLUING KIT
When you’re ready to start hot bluing guns with Oxynate No. 7™, but not ready to “really” get the whole kit and kaboodle that comes in our Bluing System Kit, this is the Kit for you.
This “First Step” Kit gives you enough equipment and supplies to “begin from”, at a price that you can afford to “begin with”. Every item was chosen to give you the basics, with the understanding that you would not get all the handy accessories, have to scrounge up some things at your end, and have to make your own tank stands. But, you would get the minimum number of tanks, the Oxynate No. 7 Bluing Salts and other chemicals, plus all the safety gear that you absolutely must have to get started. And, our exclusive - and absolutely unique - step-by- step Bluing Instruction Book; 34 pages of the finest bluing information available in the entire industry, worked out over years and years of experience with hot bluing, and the mainstay of thou-sands of gunshops’ bluing success.
If you still have trouble, our full-time Tech Support Staff can help you out plus, there’s our uncompromising guarantee: You will be sat-isfied - period.
A brief listing of the products included in the Kit follows. You’ll find full descriptions in the next few pages. Save money and time when you buy the “First Step” Kit.
KIT INCLUDES
OXYNATE NO. 7 - (1) 40 lb. pail.
CLEANER - (1) 8 lb. box of Dicro-Clean 909 caustic granules (require an additional hazardous shipping fee) or (1) gallon of non-hazardous, liquid NH-909 that eliminates ONE of the hazardous shipping fees.
BLACK - IRON TANKS - (2) Won’t contaminate bath. For Cleaning Solution/Hot Water Rinse, and Bluing Solution.
FIBERGLASS TANK - (1) Tough, rigid, gel-coated, fiberglass tank used for Cold Water Rinse.
BLUING TANK PIPE BURNER - (1) Provides correct heat for the Blu-ing Solution. Both Natural and Propane Gas orifices.
HOT WATER TANK PIPE BURNER - (1) Smaller size for Cleaner/ Rinse Tank saves gas. Natural and Propane Gas orifices.
THERMOMETER - (1).
BROWNELLS BLUING INSTRUCTIONS - Explicit, concise, covering every phase of bluing. Including Trouble-Shooting.
WATER DISPLACING OIL - (1) Gallon.
BLUING PARTS BASKET - (1).
BLACK IRON SCREEN WIRE - (1) Sheet.
BLACK IRON WIRE - (1) Roll.
STAINLESS STEEL DIPPER - (1).
TCE DEGREASER - (1) Quart.
FULL FACE SAFETY SHIELD - (1) Helps keep chemical splashes out of face and eyes. ALWAYS wear when bluing.
B-360 RUBBER GLOVES - (1) Pair, size 11.
NEOPRENE SHOP APRON - (1).
3M DISPOSABLE FILTER MASKS - (1) Pak of 10.#082-000-006HA “First Step” Bluing Kit, with
Dicro-Clean 909 2H614T97 . . . . . $ 799.97#082-005-009HA “First Step” Bluing Kit,
with NH 909 2H624Z97 . . . . . . . . . .799.97Requires Additional Hazardous Materials Surcharge
Cannot Ship C.O.D. Shipped FedEx Ground or Truck only
A Great Beginning …
Gun Bluing WHY GUN BLUING?
No other activity or line of work in a gun shop or sporting goods store teaches the mechanics of a gun better than bluing. To reblue a gun, one has to completely dismantle it piece-by-piece and each of the hundreds of varieties of guns that one handles has its own peculiarities. After one has handled about so many guns, the whole theory of a gun’s mechanical operation becomes ingrained in one’s mind, never to be lost. Further, continued handling of the more popular guns soon leads the gunsmith to know, almost automatically and without looking, which pieces are worn; which pieces should be replaced. There is also a money making feature - not only is bluing fairly profitable but it also gives the dealer or gunsmith an oppor-tunity to become better acquainted with his shooting customers. Nothing pleases a gunnut more than to have his favorite gun made like new by a gunsmith, and as a result he is inclined to look up to the man who worked such miracles - for bluing does seem to be magic to the uninitiated. So! As sights and scopes, slings and gun cases are needed, the sportsman not only buys from the man who did up his gun, he brings along his friends. The original cost of setting up a bluing shop is not great, nor is it necessary to buy a lot of unnecessary supplies. Bluing tanks, burners, some bluing salts and cleaner, polish and some wheels and you’re in business. From then on, buy as you need - don’t buy unless you do need. So far as bluing salts are concerned - we make no claim that ours are so much superior to anyone else’s. We do claim, and have Bureau of Standards reports to prove it, that a lot of salts claimed to be as good as ours are not . . . But let us not kid anybody - there are a lot of salts on the market as good as ours - about. We feel we are selling bluing salts to gunsmiths who know their business, sporting goods dealers and men who have grown up and are past the “sucker” stage and why should we insult their minds with a bunch of hooey? The proof of any pudding is in the eating - We guarantee you to be satisfied on a money-back basis. What more should be said? So on to business: The quality of a blue job depends entirely on the man doing the bluing - little on the salts!! If you have a man who will do a masterful piece of polishing, have all surfaces true and bright, corners sharp, no funneled screw holes and ground-off screw heads - if he is careful to clean the gun properly just before bluing - if he will follow the instructions that go with anybody’s salts - well, he’ll get bluing jobs that are out of this world. Because of our constant association with more than 10,000 gunnuts, gunsmiths, gun dealers and manufacturers in the blu-ing business, we feel we can give you the service you deserve. If we can’t after all these years, better we should go to selling raincoats and straw hats! So - Bluing can be fun and profitable - full-time or part-time. Shooters are always looking for gunsmiths who will give them honest work.
Brownells
Oxynate® No. 7HOT CHEMICAL BLUING COMPOUND
MEETS Mil SpecC13924BAM1, Class 1, Grade A
Finest Professional,Gunsmith-Developed,
Hot Bluing Salts Available On The Market Today
OXYNATE NO. 7 has, for more than 55 years, been the popular bluing salts for the professional gun trade. For quantity work (one to a dozen guns a week or month) the cost per gun is extremely low. Oxynate No. 7 is manu-
factured by one of the country’s chief producers of manufacturer’s chemicals and sold by us to the gun trade by exclusive license. This is mentioned so that you’ll appreciate the vast research laboratories available to our users of Oxynate No. 7- and that you are using the best gun blue modern science and research can produce.
Our copyrighted Instructions are, we feel, the most complete of-fered to the trade. Every step, every complication, every question the gun bluer can encounter is detailed in this booklet. The answers and suggestions are not from any one individual but are those of several thousand gun men who have used Oxynate No. 7 successfully during the past 55+ years. Ask for a copy today. Shipped FedEx ground or truck only.SPECS: 40 lb. (18.1 kg) net weight can or 400 lb. (181.4 kg) net weight drum. Normal mix is 10 lbs. (4.5 kg) per gallon of water. Full instructions included.#082-007-140HA *40 lb. Oxynate 7 2H84Z97 . . . . . . $ 109.97- 2 or More - *40 lb. Oxynate 7, per each,
2H79Z97. . . . . . . . . . . . . . . . . . . . . . . . . . . . .84.97(Note: Standard FedEx Ground Shipping for this item is $10 each.)
#082-007-940HA *40 lb. Oxynate 7, 10 or more, per each, 2H84Z97 . . . . . . . . . . . . . . .109.97
(Shipped Truck only. Please call for freight charges.)*Requires Additional Hazardous Materials Surcharge
#082-028-400HA **400 lb. Drum Oxynate 7, 8K703D73 . . . . . . . . . . . . . . . . . . . . . . . .899.97
**(Shipped Truck only. Please call for freight charges.)**Requires Additional Hazardous Materials Surcharge
Brownells
Oxynate® No. 84HOT CHEMICAL
BLUING COMPOUNDFor Rebluing Stainless Steels,
Cast Iron & Winchester 94’sOver #2,700,000
In the past, it was almost impos-sible for the general gun- smithing or bluing shop to blue stainless steel guns successfully. Now, with Oxynate No. 84, we have a superior new formulation for stainless blu-ing that has met and passed all of our demands and requirements. It has worked on all the popular guns
(S&W’s, Rugers, and virtually every type of stainless we could find), and even does a mighty good job on Cast Irons. It is predictable, re-peatable, reliable and easy to operate. Blue an action or frame with a stainless barrel in No. 84 first, then go into the No. 7 tank to blue the action or frame. The whole process is explained in the instructions.
We highly recommend you use Oxynate No. 84 for stainless steels and cast iron. But, it is not as easy to use as Oxynate®No. 7. We don’t recommend it if a little experimentation and trial- and-error aren’t acceptable; we don’t recommend it for your only bluing tank - it just takes too much messing around to replace good, old reliable No. 7. Shipped FedEx Ground or truck.SPECS: 40 lb. (18.1 kg) net weight can. Normal mix is 4 lbs. per gallon of water. Instructions included with each can. Uses the same neutralization procedures and chemicals as does Oxynate No. 7.#082-084-140HA *40 lb. Can Oxynate 84 2H88U75 $ 124.95- 2 or More - *40 lb. Can Oxynate 84, per each,
2H84U35. . . . . . . . . . . . . . . . . . . . . . . . . . . 118.70(Note: Standard FedEx Ground Shipping for this item is $10 each.)
#082-084-940HA *40 lb. Can Oxynate 84, 10 or more, per each 2H82U87 . . . . . . . . . . . . . . .109.97
(Shipped Truck only. Please call for freight charges.)*Requires Additional Hazardous Materials Surcharge
ASK ABOUT OVERNIGHT DELIVERY!
41-Piece KitGives You
EverythingYou Need
To Start BluingNOW!
• Tanks • • Stands • • Burners •
• Chemicals • • Safety Gear • • Accessories •
And …The Best
InstructionsIn The Industry!
“What Do I Need To Start Hot Salts Bluing Of Guns?” Having answered this question literally hundreds of times over the past 60+ years, we’ve put everything you need in this one complete KIT. EVERYTHING! All the basics - Tanks, Stands, Burners, Cleaners, Salts and Oil that the “other guys” sell - PLUS everything else you need to start bluing guns. Solvents, tank covers, personal safety gear, extra additives and lots more. All for just a few dollars more than those “bare bones” kits. Plus, we include our step-by-step Bluing Instruction Book. 34 pages of the best bluing information available in the Firearms Industry…perfected over the years, helping literally thousands of gunsmiths. They teach you how to blue, and if you have a problem, they explain how to cure it. Unlike others, we back our process with our industry-exclusive, full-time Tech Support Staff of “hands-on” experienced gunsmiths who can help you solve any bluing problem. At Brownells, we’re committed to giv-ing you, the working gunsmith, the finest possible service. We guarantee it 100%. We know you’ll find Bluing a rewarding, profitable addition to your shop. Compare our KIT to anybody else’s…it is the best buy on the market. So, save yourself time and money trying to make a basic “bare bones” package into a working bluing shop. Order our Bluing System Kit and put that time to work making money bluing guns. Listed below are all the items in the KIT with a brief descrip-tion of each. Check and compare this value, to any other kit on the market. And remember, we’ve got the best Instructions; the ONLY, fulltime Tech Support Staff; 60+ years experience and an Unconditional, Money-Back Guarantee.
KIT INCLUDESOXYNATE No. 7™ - The finest, most reliable Bluing Salts avail-able. Provides a deep, blue-black color on most gun steels (except stainless). Proven in small shops for over 50 years and used by top firearms manufacturers. (2) 40 lb. pails supplied.CLEANER - Use in a heated soak tank to remove the dirt and grime from gun steel that can ruin a bluing job. (1) 24 lb. box of DicroClean 909™ caustic, granules (requires an additional haz-ardous shipping fee) or (1) gallon of non-hazardous liquid NH-909 that eliminates ONE of the hazardous shipping fees.. BLACK IRON TANKS - Won’t contaminate your bath. For Clean-ing Solution, Cold Water Rinse, Bluing Solution, Hot Water Rinse and Water Displacing Oil. (5) supplied. BLUING TANK BURNER - Sized to provide correct heat for the Bluing Solution. Orifices included for both Natural and Propane Gas. (1) supplied. HOT WATER TANK BURNER - As Cleaner and Hot Water Rinse Tanks require less heat, these smaller burners save fuel. Ori-fices included for Natural and Propane Gas. (2) supplied. TANK STANDS - Interlock at sides or ends so you can design the layout to fit your shop. (Water Displacing Oil must be located away from rest of Bluing operation). (4) supplied. THERMOMETERS - Proper temperature control is required for successful Bluing and these are made to our specs to work right. (2) supplied - for Bluing Solution and Cleaner Tanks.
BROWNELLS BLUING INSTRUCTIONS - Continuously updat-ed 34 page book of explicit instructions on every phase of blu-ing. Includes Polishing, Hot Bluing, Cold Bluing and Exhaustive Trouble-Shooting Charts on the Bluing Process. WATER DISPLACING OIL - After Bluing and Rinsing, this spe-cially formulated oil seeks out and displaces any remaining mol-ecules of water with molecules of oil. Gives complete protection on all surfaces. (3) Gallons supplied. TANK COVERS - Keeps unwanted crud out, reduces evaporation in Bluing Solution and Water Displacing Oil Tank during stor-age. Rubber gasket. (2) Supplied. BLUING PARTS BASKET - Holds pistol frames, rifle actions and many other parts in the various tanks. (2) Supplied. SMALL PARTS BASKET - Use alone or inside the Bluing Parts Basket. Holds all but the smallest parts. (1) Supplied. BLACK IRON SCREEN WIRE - Cut and fold into little baskets for pins and screws. (1) Sheet supplied. BLACK IRON WIRE - A great help in hanging barreled actions, parts baskets and more in the tanks. 1 pkg. of 3 rolls supplied. STAINLESS STEEL DIPPER - Used to add water to the Bluing Solution during operation. (1) Supplied. RINSE TANK BRUSH - Wood handle, natural bristles to make sure cleaner residue is off parts. (1) Supplied. BLUING SOLUTION CLEANER - Removes depleted salts and contaminants from the Bluing Solution. (1) Pint supplied. OXYNATE “S”™ - Helps get good blue-black color on cast iron receivers and other “questionable” steels. (1) Pint supplied. TCE DEGREASER - A superb degreaser that removes gun oils quickly and easily. (1) Gallon supplied. STOP CREEP™ - Helps prevent cooled Bluing Solution from “climbing” over the edge of the Tank. (1) Bar supplied. FULL FACE SAFETY SHIELD - Helps keep caustic splashes out of face and eyes. ALWAYS wear when bluing. (1) Supplied. B-360 RUBBER GLOVES - Industrial-grade neoprene to protect hands. (1) Pair size 11 supplied. NEOPRENE SHOP APRON - Keeps those inevitable splashes off clothes - and you. Extra long and wide. (1) Supplied. 3M DISPOSABLE FILTER MASKS - Keeps harmful polishing and chemical dust out of lungs. (1) Pak of 10 supplied. GUNSMITHS DATA BINDER - Heavy, solvent/chemical resis- tant polypropylene, 3-ring binder protects instructions/gun-smith info. (1) Supplied. SHEET PROTECTORS - Heavy, 4 mil polypropylene sleeves fit Binder above. Separate Bluing Instructions and put each page in one of these. Easily cleaned off. (100) Supplied.#082-005-007HA Brownells Bluing System Kit, with
Dicro-Clean 909 2H1499Z30 . . . $ 1,999.97#082-000-004HA Brownells Bluing System Kit,
with NH-909 2H1525D82 . . . . . . . . 1,999.97(Shipped Truck only. Please call for freight charges.)Requires Additional Hazardous Materials Surcharge
Brownells BLUING SYSTEM KIT
BrownellsPRO-SHEEN™
Provides A Bright, Protective Finish To Blued Gunmetals
Our concentrated, liquid gunmetal wax is back by popular demand; provides a brilliant sheen to blued steel when applied immediately following the boiling water rinse. Penetrates deep into the metal pores for a bright, tough, oil- and dust-free finish. Not a water displacer or salts neutralizer, simply a metal conditioning wax that bright-ens and protects the bluing for a customer-pleasing finish. One quart of PRO-SHEEN yields 10 quarts of metal conditioner.SPECS: 1 qt. (946ml) container.#082-052-032HA PRO-SHEEN Metal Conditioner,
5L12D77 . . . . . . . . . . . . . . . . . . . . . . . . $ 19.97
BrownellsNH 909™
Non-Caustic, Non-Hazardous, Safe Pre-Cleaner
For Perfect Gun Preparation
Designed particularly for use on guns prior to bluing, or any metal refinishing job. Re-moves all grease, traces of buffing compounds, dirt. Operates at 180˚ F. Is non-caustic, and the
heavy-duty jug keeps it ready for the next use. One gallon makes from 10 to 21 gallons of cleaner. Will clean most work in 10 min-utes; extra cruddy parts may take up to 15 minutes.SPECS: 1 gallon (128 fl. oz./3.8L) jug.#082-000-003HA One Gallon NH 909 5L53D92 . . . . $ 74.97
BrownellsDICRO-CLEAN
NO. 909™
Non-Caustic, Safe Pre-CleanerFor Perfect Gun Preparation
Designed particularly for use on guns prior to bluing. Re-moves all grease, traces of buffing compounds, dirt. Operates at 180˚ F. Is non-caustic, and does not get soggy in storage before use. Eight pounds makes from 16 to 32 gallons of cleaner. Will clean some work in as little as 2 minutes; extra cruddy parts may take up to 15 minutes.SPECS: 8 lb. (3.6 kg) or 24 lb. (10.9 kg) net weight packages.#082-005-008HA 8 lb. Dicro-Clean 909 5L33Z34 . . . $ 49.97#082-005-024HA 24 lb. Dicro-Clean 909 5L75Z10 . . . .99.97
Requires Additional Hazardous Materials Surcharge
Brownells HOLD™
Between Polishing &Bluing Rust Preventive
A freshly polished gun, which you have spent hours getting into beautiful condition for bluing, is a prime target for surface rust if it is not going into the bluing tank immediately. A few hours under some conditions - between final polishing and blu-ing, can result in fine “silver” spots showing up on the gun after it has been blued. These are a result of microscopic rust spots developing following polish-
ing, and prior to bluing. High-powered rust preventives should not be used during this storage period, because they are difficult to remove and, if not completely cleaned off, will result in a “gray” bluing job. Brownells HOLD is the modern answer to in-shop storage of parts, prior to final finishing. It chemically engages free oxygen and neutral-izes all acidic impurities, (including fingerprint acids). No petroleum additives are included in this new, modern rust preventive; therefore, oily surfaces are not a problem. Polished, HOLD-treated parts may be put right into the 909™ Cleaning Tank with no change in your regular bluing techniques. Application is either by spray (pint spray bottle is furnished), or by immersion. Small parts may be immersed indefinitely in HOLD with no possibility of rust ever forming. Can be used on all metals except aluminum, magnesium, and cast iron such as engine parts. HOLD is non-caustic, non-acid, non-toxic, non-flam-mable, inexpensive and easy to use. HOLD-treated gun parts will withstand indefinite in-shop dry storage.SPECS: 1 gallon (128 fl. oz./3.8 L) or 5 gallons (640 fl. oz./18.9 L) net contents.#082-023-128HA 1 Gallon HOLD™ 2H26D83 . . . . . $ 34.97#082-023-640HA 5 Gallon HOLD™ 5L101D46 . . . . . 124.97
BrownellsNEUTRALIZING KIT FOR
OXYNATE® No. 7 &OXYNATE® No. 84BLUING SALTS
Makes Bluing Salts Safe For Sewer Disposal
With this kit and two locally obtainable chemicals, it is pos-sible to neutralize Brownells Oxynate No. 7 and Oxynate No. 84 Bluing Salts and make them safe for sanitary sewer disposal. Included in the kit is one, 50 pound bag of dry Sulfamic Acid; 100, 0-14 pH Color Test Strips; 100 Potassium Iodide Starch Test Strips; one Dropper Bottle for dispensing 31° Hydrochloric Acid; and Brownells Neutralizing Instructions. The only addi-tional chemicals required are pure household Lye which can be purchased locally, and 31° Hydrochloric Acid (also known
as 18° Baumé Muriatic Acid) which can be purchased locally or from Brownells.#082-073-000HA *Neutralizing Kit,
2H145D29 . . . . . . . . . . . . . . . . . . . . . $ 199.97
REPLACEMENT COMPONENTS FOR NEUTRALIZING KIT
DRY SULFAMIC ACID - Correct, technical grade for use in the neutralizing process. 50 lb. bag in carton.#082-073-050HA *Dry Sulfamic Acid, 50 lb. bag,
2H139D35 . . . . . . . . . . . . . . . . . . . . . $ 174.97
0-14 pH COLOR TEST STRIPS - Pak includes 100 test strips and color comparison chart for accurate checking of pH level during neutralization process.#082-073-001HA 0-14 pH Color Test Strips,
100 pak 4A15D32 . . . . . . . . . . . . . . . . $ 19.97
POTASSIUM IODIDE STARCH TEST STRIPS - Used in conjunc-tion with 31° Hydrochloric Acid, these strips give positive indi-cation if any nitrites remain in the neutralized solution. Pak of 100 strips.#082-073-002HA Potassium Iodide Test Strips, 100 pak,
4A04D77 . . . . . . . . . . . . . . . . . . . . . . . . $ 5.99
1 OZ. DROPPER BOTTLE - Glass bottle with dropper top works perfectly for dispensing the one, tiny drop of 31° Hydrochloric Acid required during the Potassium Iodide Starch Test. Sup-plied empty. You must purchase acid separately.#084-173-002HA 1 oz. Dropper Bottle 4H01T71 . . . . . $ 2.49
31° HYDROCHLORIC ACID - Used to verify removal of nitrites as a part of the Potassium Iodide Starch Test. Also referred to as 18° Baumé Muriatic Acid. One gallon in a plastic jug.#082-013-128HA *31° Hydrochloric Acid 5L19Z23 . $ 24.97#076-200-166HA Neutralizing Oxynate 7 & 84
Instructions, 6G00XCH . . . . . . . . . . . FREE*Requires Additional Hazardous Materials Surcharge
BrownellsROLL-AROUND,
COMPACT BLUING SYSTEM
Unhooks Gunsmiths From The Gas-Pipe Leash
Compact, portable bluing system lets the pistolsmith, knife-maker and small parts fabricator choose the most convenient place to do the bluing. Roll the system out to blue, then roll it out of the way when you’re done. There’s no need to dig out and set up tanks, stands, chemicals and burners, or dedicate a room specifically for bluing. The Roll-Around System comes complete with the mobile blu-ing cart, tanks, burners, the necessary chemicals and Brownells clear, concise bluing instructions to walk you through the pro-cess. The only other things you need are an ordinary gas grill propane tank, a garden hose for the flowing water rinse and a drain or runoff area. The rugged, welded steel cart moves eas-ily on heavy-duty, locking casters and carries three, 20" x 6" x 6" mild steel tanks. The bottom shelf has an opening to hold the propane tank and extra room to store supplies, or locate the fourth tank for water displacing oil – safely away from the heat source. Braided, stainless steel, flex lines run to a “Y” and a single, 16" long line provides easy, one-connection hookup to your propane tank. Optional 96" long flex line provides extra length for direct connection to 100-lb. propane tanks, by simply swapping out the regulator supplied with the standard gas line. Designed by Brownells Tech Staff of working gunsmiths, the Roll-Around Compact Bluing System is the perfect way for a gun shop to give their customers the traditional deep blue-black color, that can only be achieved with hot salts bluing.SPECS: Cart - Steel, black finish. 333⁄4" long, 25" (63.5cm) wide, 373⁄4" (95.9cm) high. Tanks - Black iron, natural finish. 20" (50.8cm)long, 6" (15.2cm) wide, 6" high. Gas Line: Braided stainless steel w/brass fittings. Standard Length - 16" (40.6cm) long. Optional Extra-Length - 96" (243.8cm) long. Overall Dimensions - 333⁄4" (85.7cm) long, 311⁄2" (80cm) wide, 493⁄4" (126.2cm) high. Weight - 180 lb. (81.6 kg).
#082-900-008HA Roll-Around Compact Bluing System, w/traditional Dicro-Clean 909 Cleaner, 2H1397A97 . . . . . . . . . . . . . . . . . . . $ 1,749.97
(Note: Standard FedEx Ground Shipping for this item is $18.50 each.)Requires Additional Hazardous Materials Surcharge
#082-900-009HA Roll-Around Compact Bluing System, w/non-hazardous NH909 Cleaner, 2H1197A77 . . . . . . . . . . . . . . . . . . . . . 1,499.97
(Note: Standard FedEx Ground Shipping for this item is $18.50 each.)#082-035-002HA 96" Stainless Steel Gas Line
1A61T49 . . . . . . . . . . . . . . . . . . . . . . . . . .79.97
SYSTEM INCLUDESMOBILE BLUING CART - (1) cart complete with locking casters, tank holding trays, and hardware. Includes easy-to-follow, as-sembly instructions.
BLACK IRON BLUING TANKS - (3) Won’t contaminate bath. For cleaning solution/hot water rinse, bluing solution, and water displacing oil. BLACK IRON RINSE TANK - (1) Dedicated, cold water rinse tank includes built-in hose connector for easy attachment to a garden hose.PIPE BURNER - (2) Complete with brass shutoff valves. Provides correct heat for the bluing solution and hot water tank.STANDARD LENGTH GAS LINE - 16" long, stainless steel, braid-ed line with regulator and quick-disconnects. Provides fast, easy hook-up to burners and propane tank.OXYNATE® NO. 7 - (1) 40 lb. pail.909™ CLEANER - (1) 8 lb. container of Dicro-Clean 909™ caustic granules (requires an additional hazardous shipping fee) or (1) gallon of non-hazardous, liquid NH-909™ that eliminates ONE of the hazardous shipping fees.BLUING SOLUTION CLEANER - (1) Pint. Removes depleted salts and contaminants from the bluing solution.OXYNATE® “S” - (1) Pint. Helps ensure good blue-black color on cast iron receivers and other “questionable” steels.STOP CREEP™ - (1) Bar. Helps prevent cooled bluing solution from “climbing” over the edge of the tank.THERMOMETER - (2). Made to our specifications to work right. Use with the bluing solution and cleaner tank.BROWNELLS BLUING INSTRUCTIONS - Explicit, concise, cov-ering every phase of bluing, including trouble-shooting.WATER DISPLACING OIL - (1) Gallon. BLUING PARTS BASKET - (1).SMALL PARTS BASKET - (1). BLACK IRON SCREEN WIRE - (1) Sheet. BLACK IRON WIRE - (1) Pak of 3 Rolls.STAINLESS STEEL DIPPER - (1). RINSE TANK BRUSH - (1).TCE CLEANER/DEGREASER - (1) Quart. FULL FACE SAFETY SHIELD - (1) Helps keep chemical splashes out of face and eyes. ALWAYS wear when bluing. B-360 RUBBER GLOVES - (1) Pair, size 11. NEOPRENE SHOP APRON - (1). 3M DISPOSABLE FILTER MASKS - (1) Pak of 10.GUNSMITHS DATA BINDER - (1) Solvent - and chemical-re-sistant, polypropylene, 3-ring binder protects instructions and other gunsmith reference materials.DATA SHEET PROTECTORS - (100) Polypropylene sleeves fit binder above.
Brownells OXYNATE® "S"Special Additive For Bluing Heat-Treated
Steels & Cast Irons
Something we all have been looking for - for a long time. Prevents red colors from forming on heat-treat-ed steels; makes possible the bluing of 95% of all cast irons. Prevents bath breakdown when a little copper is present, or a little brazing has been done. Produces deeper color. Shortens in-tank time, increases pro-duction. Maintains corrosion resistance of the bluing. Altho’ it appears a little expensive in the undiluted state, 1 pint will treat up to 8 gallons (at 2 oz. per gallon), or 2 operating bluing tanks of Oxynate® No. 7. So - in the long haul - Oxynate “S” is one of the cheapest additions you can make to your bluing setup. Full, detailed instructions. Must be added when no guns in tank; wait 30 minutes before bluing.SPECS: 1 pt. (16 fl. oz./473 ml) or 1 qt. (32 fl. oz./946 L) net contents in plastic bottle.#082-029-016HA Pint Oxynate “S” 5L21D40 . . . . . . . $ 29.97#082-030-032HA Quart Oxynate “S” 5L36T55 . . . . . . .49.97
BrownellsNitreBlue®
BLUING SALTSGorgeous “Fire Blue” Colors &
No-Scale Tempering — A Master Metal Finisher’s Secret,
Useable In Any Shop
Turn parts and small pieces a deep, rich, lustrous blue with a finish that’s tougher and prettier than most of the cold blues. The process is really quite simple: Heat the salts up to 570°F. - 650° F. (They are NOT dissolved in water, they’re used straight). Dip the parts in, watch for the color change. Lower temperatures give a “straw” color like the older Luger parts. As an added bonus, the salts can be used for the drawing operation when heat-treating springs and parts.SPECS: 10 lb. (4.6kg) or 20 lb. (9.1kg) in plastic, resealable plastic pail. 1 lb. of salts will take up approximately 15 cubic in. (245 cubic cm).#082-090-019HA *10lb. NitreBlue Bluing Salts,
5L28U38 . . . . . . . . . . . . . . . . . . . . . . . . $ 39.97#082-090-020HA *20lb. NitreBlue Bluing Salts,
5L47U39 . . . . . . . . . . . . . . . . . . . . . . . . . 62.00*Requires Additional Hazardous Materials Surcharge
BrownellsSTEEL WHITE™
THE SAFER, 2nd GENERATION RUST & BLUE REMOVER
Attacks The Rust, Not The Steel -pH Neutral, Non-Toxic -
Contains No Hazardous Components
Effectively removes heavy rust, scale and blu-ing without damaging your expensive firearms or parts, because it attacks the rust, not the base metal. Works great on both steel and cast iron without danger-ous fumes; does not cause hydrogen embrittlement. pH neutral solution won’t eat your clothing or bench. Does not attack softer metals like brass, copper, zinc or aluminum so there’s no need to remove inlays, sight beads or solder-on ribs before immersion. Highly concentrated liquid really saves money. One gallon of Brownells Steel White can be diluted with water to make up to 20 gallons of safe, economical, rust and blue removing solution. Removes light rust and bluing in as little as 5 minutes; immerse in solution longer for heavier rust or scale. Works great at room temperature but can be heated to 120° F. to increase speed of rust removal.SPECS: Available in quart (32 fl. oz./946 ml) and gallon (128 fl. oz./3.8 L). pH neutral liquid.#082-055-032HA Quart Steel White Rust Remover,
5L22D95 . . . . . . . . . . . . . . . . . . . . . . . $ 29.97#082-055-128HA Gallon Steel White Rust Remover,
5L79D67 . . . . . . . . . . . . . . . . . . . . . . . . . .99.97
BrownellsBLUING SOLUTION CLEANER
Extend Oxynate No.7™ Solution LifeCleans Out Crud; You Get More Bluing Per Bath
Modern hot bluing solutions (such as Oxynate No. 7) are often replaced before their chemical activity is depleted because of accumulated crud in the tank. This crud includes depleted chemicals which are stay-ing suspended in the bath, airborne dirt particles and the resi-
BrownellsB.O.N.™ Crystals
BLEED-OUTNEUTRALIZER
Stop “After-Bluing” Salts Bleed-Out
Soaking the gun for 30 minutes in a 5% solution of B.O.N. and water (6 oz. to the gal.) between the cold and hot water rinse following bluing, will neutralize any residual salts and prevent this unsightly and damaging bleed-out - that white ring showing where barrel and frame join, around ribs, ramps or sights, and occasionally around milled-out sections in the receiver. Operates at 130° to 150° F. Use in regular type bluing tank. One gallon of mixed solution will do several guns. Can be carried over.SPECS: 8 lb. (3.6 kg) net weight.#082-001-008HA B.O.N. Crystals 5L16D01 . . . . . . . . . $ 19.97
Brownells
d’Solve®
GUNSMITH CLEANERBench-Top Soaking Cleaner Concentrate
Is Fast And Economical
Fast, efficient, soak-cleaner for guns and parts that is non-hazardous, non-flammable,
biodegradable, odor-free and NOT expensive! The grimiest parts left soaking in a bench tray of d’Solve, while you’re doing other work on the gun, come out clean, ready to dry, oil, and assemble. Used as a brush-on cleaner, actions and chambers are rapidly rid of crusted dirt and grime. Wiped on, d’Solve is an excellent pre-cleaner for touch-up bluing; tool and equipment cleaning. With a small brush, it is unsurpassed for cleaning old checkering, the caked-on dirt on gunstocks, tough dirt on hunting and camp-ing gear. A stronger mix even removes road tar from finished surfaces. And, to get grease/oil stains out of clothes, rub some full-strength d’Solve into the spots before tossing them into the wash. Word-of-mouth from gunsmith to gunsmith has made it our most popular bench cleaner. It is 100% guaranteed to do the job for you, too! One gallon of d’Solve makes five gallons of bench cleaner. It can be mixed stronger for tougher jobs - lighter for less demanding cleaning operations.SPECS: Net Contents; 1 gal. (128 fl. oz./3.8 L) in plastic container, 5 gal. (640 fl. oz./19 L) in bulk container. Full instructions.#082-010-128HA 1 Gallon d’Solve® Cleaner,
5L27Z12 . . . . . . . . . . . . . . . . . . . . . . . . $ 37.14#082-010-640HA 5 Gallon d’Solve® Cleaner
5L94Z14 . . . . . . . . . . . . . . . . . . . . . . . . .129.23
N440GLOVESExtra-Long,Extra-Heavy,
Extra-Protection
Black, milled neoprene, multiple-dip glove, offering protection in 103 basic oils, acids, caustics, greases and solvents. Heavy-weight, gauntlet style, with non-slip grip and curved fingers. Made slightly oversize for easy removal.SPECS: 14" (35.5cm) overall. Pure neoprene. No lining. #967-540-010HA Size 10 N440 Gloves 7F14C70 . . . . $ 21.00#967-540-011HA Size 11 N440 Gloves 7F15C92 . . . . . .22.75
NEOPRENE GLOVESMedium Weight For Bluing &
Plating
Withstands oils, acids, greases, solvents, and caustics.SPECS: 11" (28cm) L. Size 10 & 11.#967-360-010HA Size 10
Gloves 7F08B50 . . . . . . . . . . . . . . . . . $ 10.50#967-360-011HA Size 11 Gloves 7F08B50 . . . . . . . . . . .10.50
due from inadequate cleaning/rinsing. Industry uses expensive and complicated filters to remove this crud. To use our Bluing Solution Cleaner, first add it to the cold bath, stir well as the bath heats, and then skim the bluing bath thor-oughly when operating temperature is reached. Your bath will be returned to a clean, trouble-free operation. Plus, the cleaner stays in solution instead of being “used up”, so the crud keeps right on coming to the top for easy skim-off. Keeps the bath clean and bluing, and greatly extends solution life…paying for itself many times over.SPECS: 1 pint (16 fl. oz./473 ml) net contents in plastic bottle.#082-002-016HA Bluing Solution Cleaner,
5L16D84 . . . . . . . . . . . . . . . . . . . . . . . . $ 24.97
BrownellsBLUING THERMOMETER
Accurate temperature control of the bluing bath is absolutely a must for long lasting, true-color blue jobs. Brownells stain-less steel Bluing Thermometer is carefully sealed for use in the caustic bluing bath. Each and every thermometer is calibrated and double-checked for accuracy. Cheap, poorly constructed thermometers cause more bluing failures than any other single thing, and it is our feeling that any company offering them for sale to gunsmiths has little knowledge of the bluing game. Brownells Bluing Thermometer has a long, 6" stem. Only 3" of the stem need to be immersed in the bath, leaving 3" of safety margin to keep the dial out of the salts. Supplied with a Clip to attach the Thermometer to the tank and keep it 1" from the side and 1" above the bottom of a 6" deep tank.SPECS: Thermometer: Black numbers, silver face. 21⁄8" (5.4cm) diameter, 50°-350° F. Clip: Stainless Steel. 21⁄2" (6.3mm) long.#082-068-000HA Bluing Thermometer 4K32H09 . . $ 39.97#082-068-100HA Thermometer Clip 4K03H40. . . . . . . .4.97
Accurate Temperature Readings For Bluing, Plating & Parkerizing Baths
Shown with optional clip
BrownellsRUST and BLUE REMOVER
Attacks Only Rust & Blue;Won’t Damage Steel
There are many times when the use of a good rust remover is called for during the bluing op-eration - old time guns too fragile to polish - guns that have been badly neglected and are not worth spending enough money on to warrant a good polishing job - and guns so badly rusted it would take too much valuable time trying to buff off
all the rust and crud on the metal. Our Rust Remover comes in concentrated form. One quart is mixed with one quart of pure water to make two quarts of operating rust remover solution. The remover is made so it will not attack anything but rusted steel, not the live steel itself, providing immersion is not un-reasonably long - several hours, that is. Rust and old blue will be completely removed, leaving nothing but clean steel, ready for polishing.SPECS: Available in 1 quart (32 fl. oz./946 ml) or 1 gallon (128 fl. oz./3.8 L). 1 quart makes 2 quarts solution, 1 gallon makes 2 gal-lons of solution.#082-054-032HA Quart Rust And Blue Remover,
5L21D77 . . . . . . . . . . . . . . . . . . . . . . . . $ 29.97#082-054-128HA Gallon Rust And Blue Remover,
5L58D58 . . . . . . . . . . . . . . . . . . . . . . . . .74.97Cannot ship outside Continental U. S. Shipped UPS or FedEx Ground only within U.S.
BrownellsWATER DISPLACING OIL
”AFTER-BLUING” RUST PREVENTIONBest Possible “After-Bluing” Oil
Removes Water, Neutralizes Salts,Acids And Fingerprints
The real professional - and longtime favorite - “after-bluing”, one-step oil and protection treatment. Specially formulat-ed; the molecules of oil actually displace the molecules of water still on the surface of the gun as it comes out of the final hot water rinse. Gives the gun a completely protected surface, ensuring your time spent on polishing and bluing will not be
spoiled by rust under the oil. Also a superior rust preventive which neutralizes fingerprints, body acids and oils from han-dling and shooting. Provides a protective film with that proper “oiled and protected” feel preferred by many serious shooters and gun people. The standard by which other “after-bluing” oils are judged.SPECS: Net contents; 1 qt. (32 fl. oz./946 ml) or 1 gal. (128 fl. oz./3.8 L) in metal can, 5 gal. (640 fl. oz./18.9 L) in bulk container.#082-057-032HA Qt. Water Displacing Oil
5L17D66 . . . . . . . . . . . . . . . . . . . . . . . . $ 24.97#082-057-128HA Gal. Water Displacing Oil
5L44D70 . . . . . . . . . . . . . . . . . . . . . . . . . .59.97#082-057-640HA 5 Gallons Water Displacing Oil,
5L174D79 . . . . . . . . . . . . . . . . . . . . . . . .249.97
Brownells PIPE BURNERSProfessional Bluing Salts Heating System
Made especially for bluing tank use. Engineered with the cor-rect size pipe burner, two rows of burner holes, jets and mixing chamber to heat our Oxynate® No. 7 and give maximum efficien-cy. Each burner includes mixer, orifice cap and Tee-Valve. Will save you time in heating-up, and money by eliminating wasted gas. Burners available for NATURAL or LP GAS.SPECS: 45" (1.14m) long x 15⁄8" (2.8cm) diameter. Requires 11" (27.9cm). w.c. gas pressure for LP; 4"-6" w.c. for Natural Gas. 42,000 BTU capacity.#082-031-032HA *Natural Gas Bluing Pipe Burner,
complete, 2H159T45 . . . . . . . . . . . . . $ 199.97#082-031-051HA *LP Gas Bluing Pipe Burner,
complete, 2H159T45 . . . . . . . . . . . . . . 199.97#082-032-032HA #32 Nat. Gas Orifice 3K06T64 . . . . . . 9.95#082-032-051HA #51 LP Gas Orifice 3K06T64 . . . . . . . 9.95#082-033-000HA Combined T-Valve, w/o orifice cap,
3K31T57 . . . . . . . . . . . . . . . . . . . . . . . . . 39.97#082-034-114HA 1⅝" I.D. Flat Face Mixer, w/shutter,
3K47T87 . . . . . . . . . . . . . . . . . . . . . . . . . 59.97#082-034-159HA Shutter For 15⁄8" Flat Face Mixer,
3K11T08 . . . . . . . . . . . . . . . . . . . . . . . . . .14.97#082-035-158HA *1⅝" O. D. Burner Pipe 3K133T94 .174.97
PILOT & SHUT-OFF VALVE - Fuel shut-off valve with pilot and thermocouple for your pipe burner. Designed to shut-off both pilot and main burner flame in the event the pilot flame goes out. Complete to do one pipe burner. Instructions included.#082-038-000HA Nat. Gas Plt & T’cupl 2H394T22 . $ 449.97#082-039-000HA LP Gas Pilot & T’cupl 2H394T22 . .449.97
REPLACEMENT PARTS FOR ROUND FACE MIXERS - In December of 1992, Brownells changed from a Round Face Mixer with a slip-in Tee-Valve to a Flat Face Mixer with a screw-in Tee-Valve. The parts listed below fit the Round Face Mixers.#082-033-100HA Large AGA Tee-Valve, w/o orifice cap
3K38T41 . . . . . . . . . . . . . . . . . . . . . . . $ 49.97#082-034-158HA 1⅝" I.D. Round Face Mixer
3K39T95 . . . . . . . . . . . . . . . . . . . . . . . . .49.97#082-036-032HA Round Face Orifice, Nat. Gas
3K08T50 . . . . . . . . . . . . . . . . . . . . . . . . 12.45#082-037-051HA Round Face Orifice, LP 3K08T50 . . 12.45
BrownellsHOT WATER CLEANING TANK PIPE BURNER
Saves Gas &Money On Heating
Cleaner & Rinse Tanks
For 909™ cleaning solutions or hot water rinse tanks, you don’t need as much burner capacity as our bluing tank pipe burner delivers. So, to save you gas, and some setup costs, we had these special Hot Water Cleaning Tank Burners designed. They have one row of specially sized holes in a 3⁄4" pipe. Includes a mixer head and gas cock with either LP or Natural Gas orifice. (Don’t use on the bluing tank; they won’t make enough heat.)SPECS: 42" (106.7cm) long overall. Weighs 41⁄2 lbs. (2.0kg) 1⁄4" (6.3mm) NPT pipe thread on gas cock. Requires 11" (27.9cm) w.c. gas pressure for LP; 4"-6" w.c. for Natural Gas. 25,600 BTU. #082-040-000HA Natural Gas HWCT Burner, complete,
2H122T62 . . . . . . . . . . . . . . . . . . . . . $ 149.97#082-401-001HA LP Gas HWCT Burner, complete,
2H122A62 . . . . . . . . . . . . . . . . . . . . . . 149.97#082-033-000HA Combined T-Valve, w/o orifice cap,
3K31T57 . . . . . . . . . . . . . . . . . . . . . . . . 39.97#082-042-700HA ¾" I.D. Hot Water/Half Tank Mixer,
3K39T02 . . . . . . . . . . . . . . . . . . . . . . . . 49.97#082-045-700HA ¾" O.D. HWCT Burner Pipe
3K84T83 . . . . . . . . . . . . . . . . . . . . . . . 109.97#082-043-003HA Nat. Gas HWCT Burner Orifice Cap,
3K06T64 . . . . . . . . . . . . . . . . . . . . . . . . . .9.95#082-044-053HA LP Gas HWCT Burner Orifice Cap,
3K06T64 . . . . . . . . . . . . . . . . . . . . . . . . . .9.95
Brownells TANK COVERProtect Solutions From Contaminants & Evaporation
Covering the solutions you have in our 40" Black Iron or Stainless Steel tanks when they’re not being used keeps dirt and contaminants out and extends solution life by prevent-ing evaporation for a nice $$$ savings to you. Has a thick, rubber seal to compensate for slightly bent or warped tanks and still gives a tight fit. Available in 18 gauge steel or stainless.SPECS: 18 gauge steel or stainless steel. 403⁄4" (103.5cm) x 61⁄2" (16.5cm). Will not work on tanks with heat saver shields.#082-074-002HA Steel Tank Cover 2H30Z72 . . . . . . $ 39.97#082-004-663HA Stainless Steel Tank Cover,
2H56Z28 . . . . . . . . . . . . . . . . . . . . . . . . . .74.97
BrownellsTCE CLEANER DEGREASER
Fast-Acting, Deep-Cleaning, Chlorinated Solvent Ozone-Safe Replacement For Trichloroethane
TCE cuts through almost all greases, waxes and gunk, yet because it is com-pletely volatile, does not leave any resi-due on the cleaned part. We have found TCE to be the very best way to get gunk off prior to bluing, plating or browning. Makes an excellent closed-can soak for re-ally gunked-up parts. Super in Ultrasonic Tanks, too. The least harmful of the chlo-rinated solvents still generally available. (This isn’t a license to be careless, follow the label directions exactly!) Must be used with adequate ventilation; gloves and eye protection are recommended. Keep away from heat and open flame.SPECS: Quart (32 fl. oz./946 ml) or Gallon (128 fl. oz./3.8 L).#083-060-032HA Quart TCE 5L16P35 . . . . . . . . . . . . . $ 19.97#083-060-128HA Gallon TCE 5L51P18 . . . . . . . . . . . . . .66.67Cannot ship outside Continental U. S. Shipped UPS or FedEx Ground only within U.S.
BrownellsSTAINLESS STEEL SCREEN WIRE
Ideal For Small Parts Baskets
Allows you to make your own Bluing Parts Basket that won't contaminate the bath. Cut with snips and fold to shape. Mesh size is slightly larger than window screening.SPECS: #304 SS. 12" (30.5cm) x 12".
#082-059-000HA SS Screen Wire 8K08D89 . . . . . . . . $ 12.47
Brownells ELECTRIC TANK HEATERSHeat Bluing, Parkerizing & Cleaning Solutions With Clean, Fast, Electric Heaters
Electric tank heaters deliver perfect temperature control, eliminate open flames and the heat loss associated with conventional pipe burners. Heat-up is smooth; no hot spots or lumpy salts to break up, because
the solution is heated so gently. Parkerizing sludge on the tank bottom is virtually eliminated. You’ll need a heater and control unit for each tank. We have two heaters: a high output 6kw for Bluing and Boiling Water Rinse tanks, and a 4kw for Parkerizing, 909, and B.O.N. tanks.
Both include an 8" long “pigtail” which your electrician can wire into the Control Unit. The Low Temp Control Unit covers a range from 30° F. to 220° F. High
Temp Control Unit regulates from 200° F. to 500° F. Both include a 5' teflon covered capillary tube and bulb. The application table is for 6" x 9" x 40" Deep Tanks (deep
tanks highly recommended).SPECS: SS elements: 4kw, 240 volt, single phase w/38" (96.5cm) long ele-ment or 6kw, 240 volt, single phase w/33" (84cm) long element. 8" (2.4m) long pigtail. Control Units: Heavy-duty plastic box. 131⁄2" (34.3cm) high, 91⁄2" (24cm) wide, 63⁄4" (17.1cm) deep. Wire each Control Unit to its own 30 amp, 220/240 volt, 50/60 Hertz circuit.#082-106-100HA 4kw Tank Heater 9A799U95 . . . . . . . . . . $ 999.95#082-105-100HA 6kw Tank Heater 9A1116U60 . . . . . . . . . 1,445.95#082-106-101HA Low Temp Control Unit 9A314U95 . . . . . 399.95#082-105-101HA Hi Temp Control Unit 9A332U90 . . . . . . . 416.97
HEATING UNIT CONTROL UNIT USE 4kw 6kw LOW HIGH909 Cleaner X XBoiling Water Rinse X XB.O.N. X XParkerizing X XOxynate #7 X XOxynate #84 X X
We’ll Be Your Warehouse800-741-0015
CALL OFTEN!!
LAUREL MOUNTAIN FORGEBARREL BROWN & DEGREASER
Finest, Classic, Rust Browning System Available
Highly acclaimed by Gunsmith and Author, John Bivins, in the March/April 1977 RIFLE. Contains no mercury salts, and is non-toxic. Cuts through grease and oils, making pre-cleaning much less critical. Works fast, 4 to 6 applications 3 hours apart. Needs a “damp box” to work best. The resulting brown is fine-grained with excellent color.SPECS: 2 fl. oz. (59 ml) or quart (32 fl. oz./946 ml) net contents.#519-100-025 2 oz. Laurel Mountain Brown,
9A00ZAY. . . . . . . . . . . . . . . . . . . . . . . . . . . $ 7.45#519-100-032 Qt Laurel Mountain Brown 9A58P45 68.25
BrownellsGAS GRILL TANK BURNER ADAPTER
Use Your Gas Grill Tank For Bluing
Hose with regulator adapts gas grill propane tanks to Brownells Bluing/Hot Water Tank Burners.SPECS: 60" (152 cm) long, 1⁄2" (1.3cm) O.D. Fits 1⁄4" (6.4mm) NPT.
#082-035-001HA Tank Burner Adapter 1A23T95 . . . . . . . . . . . . . . . . . . . . . . . . $ 31.95
WHICH TYPE OF BLUINGSHOULD I CHOOSE?
With so many different types of bluing available, at-tempting to choose the one most appropriate for your needs can be confusing. Each type has its advantages. Brownells provides four basic types of bluing; Oxynate® No. 7, hot salts bluing; Dicropan IM®, a hot water blue; Nitre Blue® Bluing, a heat blue; Dicropan T4®, Oxpho-Blue® and 44/40® cold blues.
OXYNATE NO. 7
Our Oxynate No. 7 hot salts bluing is the type most com-monly used by firearms manufacturers and offered by more fully equipped gunsmith shops than any other. The advan-tages are: speed of the operation; uniformity of color; the relative simplicity of the process and a very consistent, du-rable finish on a variety of different types of steels: one that closely matches the original finish on many of the firearms produced commercially within the last fifty years or so. This is very important, for you can provide your customers a finish they are familiar with and find desirable. Also, hot salts bluing is what most folks expect from a professional gunsmith. And, since it is not normally done by a hobbyist or tinkerer, it is the popularly accepted mark of the profes-sional gunsmith. To do the finest possible job of bluing with Oxynate No.7, you’ll need to set up a separate room to keep the steam and humidity generated, away from tools or guns. You’ll also need tanks, stands, burners, safety gear and an adequate source of natural gas, propane or electricity.
DICROPAN IM
Hot water blues, such as our Dicropan IM, are updated versions of the traditional “rust blues” that took days or weeks to apply. Dicropan IM will provide a very attractive blue/black color and an extremely durable, abrasion resis-tant finish. It is completely safe to use on soft soldered, double barrel shotguns. Applying Dicropan IM is a very simple procedure and can be done with as little as one tank and a heat source to get the water in the tank boiling. While more labor intensive than Oxynate No. 7™ Bluing, Dicro-pan IM™ Bluing is an excellent choice for the occasional rebluer or the shop specializing in double barrels.
NITRE BLUE BLUING
Bluing can also be done by controlled heating of the part and Brownells NitreBlue is an example of this type of blu-ing. It is a very old process that was used frequently during the 19th century. The salts liquefy when heated to approxi-mately 275° F. to 300° F. The normal “bluing” temperature is around 600° F. NitreBlue™ Bluing requires very little equipment: the salts, a container to heat them in, and a heat source. By varying the amount of time you submerge your workpiece and the temperature of the liquefied salts, you can obtain colors ranging from the straw found on Luger triggers to the very bright blue found on older Colt revolv-ers. Because of the high temperatures involved, NitreBlue Bluing should be used on small, non-critical components such as butt plates, grip caps and sights, to avoid changing any heat-treating on action parts.
OXPHO-BLUE, DICROPAN- T4, & 44/40
Cold blues, like our Oxpho Blue, Dicropan T4 and 44/40, are ideal for the hobbyist or for the shop that does only a bit of metal finish touch-up from time to time. No special equipment is required other than a solvent to remove all traces of grease or oil and a swab or cleaning patch to ap-ply the cold blue. There is no danger of rust or damage to other equipment from fumes or high humidity. Cold blues can be used quickly and easily, and the process is fast and very simple.
For more information on any of our bluing products, please call and talk with our Technical Support Staff. All are professional gunsmiths and have many years of “hands on” experience with our bluing products. In addition, we have the most complete Bluing Instruction Booklet in the industry . . . we will be happy to send it free on request.
BrownellsSTAINLESS STEEL TANK
Perfect For Parkerizing Hot Cleaning & Rinse Tanks
Ideal for cleaning solutions, boiling water, cold or hot rinse tanks, oil tanks…but DON’T USE IT FOR BLUING SALTS!! Bluing Salts in the presence of stainless steel and gun steel frequently can create “galvanic” action (electric current flow) between the two dissimilar metals resulting in a “false plate” of either chemicals (streaking the bluing with random iridescent blues/greens/purples) or stainless steel (giving patches of ran-dom silver specks/spots). So - use for all other tanks to prevent rusting and mess; but keep your bluing salts contented and blu-ing right in our Black Iron Bluing Tanks!!SPECS: 16 gauge, 304 Stainless Steel. Welded ends, rolled edges. 6" (15.2cm) x 6" x 40" (101.6cm) long. Holds 41⁄2 gal. solution.#082-004-664HA Stainless Steel Tank 3K141Z11 . . $ 174.97
BrownellsSMALL PARTS
BASKETExpanded Metal Basket Holds Big & Small Parts
The finest, all-around basket we’ve found for bluing tank use. Holes are sized to keep in all but the smallest pins and screws, without a liner, while allowing plenty of solution circulation. Fits inside our Bluing Parts Basket or, add legs to make it a stand-alone.SPECS: 13" (33cm) long x 5" (12.7cm) wide x 23⁄4" (7cm) high. .045 (1.1mm) thick mild steel.#082-072-000HA Small Parts Basket 1A11D95 . . . . . $ 14.97
BLUING PARTS BASKET - Open-mesh, welded wire permits complete solution cir-culation around pistols, shotgun frames, rifle receivers and other large parts.SPECS: Steel. 141⁄4" (36.2cm) long x 55⁄8" (14.3cm) wide outside; 3" (7.6cm) high.#082-071-000HA Bluing Parts Basket 3K09D23 . . . . $ 12.47
BrownellsFIBERGLASS TANK
Ideal For Rust Remover, Acids, Water Displacing Oil
Tough, molded, rigid, fiberglass tanks are the perfect con-tainers for rust remover, dipping oil, plating acids, rinse baths, plating solutions (using an immersion heater) and just about any other chemical you might use in the gun shop. The corro-sion-resistant polyester formula used in making these tanks for us offers the highest chemical resistance - in fact, so resistant, it is considered inert to most substances! Heavy-duty, top-qual-ity construction, using finest materials. Has rolled edges for strength, plus makes nice fingertip grip for easy carrying. Flat bottom stands level. Fiberglass won’t crack, craze, melt, flex, wobble, react or bleed. Smooth, hi-visibility, off-white interior. Temperature safe to approximately 300° F., but do not use over direct heat source; use immersion heaters only.SPECS: Outside is 8" (20.3cm) x 36" (91.4cm) x 6" (15.2cm) high. Inside at bottom is 47⁄8" (12.3cm) x 311⁄4" ( 79.3cm); at top is 63⁄8" (16.1cm) x 341⁄2" (87.6cm). Do not use for long-term storage.#082-064-001HA Fiberglass Solution Tank,
9A34D45 . . . . . . . . . . . . . . . . . . . . . . . . $ 44.45#082-064-002HA Fiberglass Solution Tanks, 2 each,
2H54D78. . . . . . . . . . . . . . . . . . . . . . . . . .80.07
Brownells TANK STANDVersatile, ExpandableSystem Adapts To Fit
Your Needs
Lets you design the tank layout to fit YOUR preferred work flow and available shop space. Set up end-to-end, cor-ner-to-corner, side-to-side or overlap side-to-end, then bolt together using the pre-spaced, pre-drilled holes. Puts the top of a 6" x 6" x 40" tank 3' from the floor. Allows good flame travel across the tank bottom and up the sides. Easily supports a tank full of salts and work pieces. Saves hours of construction time. Partially assembled. Can go UPS.SPECS: 41" (104.1cm) long. 81⁄4" (22.2cm) wide. 283⁄4" (73cm) high. 3⁄4" (19.0mm) angle rails, 1" (2.5cm) x 15⁄8" (4.1cm) angle ends, 1" (2.5cm) sq. legs. 5⁄16" (7.9mm) diameter mounting/assembly holes. Includes Stand, pipe burner lock-downs, 3 Interlocking Bars and As-sembly Bolts with nuts and washers. Detailed Instructions include fully diagramed assembly options.#082-074-001HA Tank Stand 6D127Z16 . . . . . . . . . . $ 174.97
IBLUING ACCESSORIESIMuch Needed Goodies Make Your Bluing Life Easier
STAINLESS STEEL DIPPER - Long handled, all stainless steel dipper for adding water to the Bluing Bath. Bent handle for “side” pouring.SPECS: Stainless steel. 15" (38cm) overall. 4" (10cm) dia. bowl.#933-001-000HA Stainless Steel Dipper
3A00HDZ . . . . . . . . . . . . . . . . . . . . . . . $ 17.32
RINSE TANK BRUSH - Natural fiber brush, just right for use in the rinse tank.SPECS: 1" (2.5cm) long bristles, set 15⁄8" (4.1cm) wide x 413⁄16" (12.2cm) long. 115⁄8" (29.5cm) overall.#671-540-460HA Rinse Tank Brush 1G00TPU . . . . . . $ 8.76
BLACK IRON WIRE - Dead-soft annealed so bends easily, holds firmly. Not plated - just a light oil coat so it cannot contaminate/ruin your bluing or plating.SPECS: 18-gauge about .047" (1.2mm). 50-ft. (1524cm) coils. #038-018-003HA Black Iron Wire, 3 coils
8C00AVB . . . . . . . . . . . . . . . . . . . . . . . . $ 3.95
HALF TANKS - Made just half as long as the regular black ironand stanless steel tanks - to hold half as many bluing salts and take less time to heat up. Ideal for handguns and small parts bluing when you don’t need to fire up the “big” tanks. SPECS: Black iron. 6" (15.2cm) x 6"x 20" (50.8cm). Welded seams, rolled edges. Holds 2 gallons of solution.#082-003-662HA Black Iron Half Tank 3K33D20 . . . $ 49.97#082-004-662HA Stainless Steel Half Tank
6D55Z96 . . . . . . . . . . . . . . . . . . . . . . . . .69.95
SMALL PARTS BLUING BASKET - Stainless steel baskets, just the right size to keep small parts from getting lost in bluing and parkerizing tanks. Fine mesh screen allows complete solution circulation around parts. Eliminates hanging things on wires. Squeeze to open, spring-loaded handle.SPECS: Stainless steel. 2" (5cm) dia. basket. 4" (10.1cm) handle.#515-000-001HA Round Ball Parts Basket
5A10Y98 . . . . . . . . . . . . . . . . . . . . . . . . $ 12.94
BLACK IRON DEEP TANK - We’ve made a 9" deep version of our 6" wide x 40" long black iron tank that’s great for blu-ing with our electric heating units. Leaves a working depth of about 5". Also use for 909™, Boiling Water, and B.O.N.™).SPECS: Black iron. 6" (15.2cm) wide x 9" (22.9cm) deep x 40" (101.6cm) long. Holds 71⁄4 gallons of solution.#082-003-694HA Black Iron Deep Tank
3K57D52 . . . . . . . . . . . . . . . . . . . . . . . . $ 74.97
BrownellsBLACK IRON BLUING TANK
Best Tank Made For Hot Chemical Bluing
Custom made for us especially for the professional
gun bluing industry. About 41⁄2 gallon working capacity. Welded of black iron with inset ends, rolled edges. Will not affect salts in any way, cannot damage solution, chemical balance or use life. Best available!SPECS: 18 ga. (68.1L) black iron. 6" (15.2cm) x 6" (15.2cm) x 40" (101.6cm). Holds 41⁄2" gallons of solution.#082-003-664HA Black Iron Bluing Tank,
3K40D34 . . . . . . . . . . . . . . . . . . . . . . . $ 49.97
To determine the number of gallons of bluing solution in your bluing tank, use this formulae (all measurements in inches):
[length X width X depth of solution wanted] = # gallons solution 231 cu. in/gallonNote: Oxynate® No.7 uses approximately 10# Salts per gallon of solution.
Oxynate® No.84 uses approximately 4# Salts per gallon of solution.
HOW MANY GALLONS DOES THE TANK HOLD?
BrownellsQUARTER TANK
Specially For NitreBlue™ Bluing -Perfect For Small Parts Hot Bluing
Just the right size for NitreBlue Bluing of handgun barrels, frames, slides, cylinders and all the small parts that go with them. Holds about 17 lbs. of our NitreBlue Bluing Salts or, holds 1 gallon of Oxynate™ No. 7 and Oxynate™ No. 84 solutions for bluing handguns one at a time.SPECS: Black iron. 6" (15.2cm) x 6"x 10" (25.4cm). Welded seams, rolled edges. Holds 1 gallon of solution.#082-003-661HA Quarter Tank 3K26D39 . . . . . . . . . . $ 34.97
100% Satisfaction Guaranteed, Forever
Brownells 44/40® CREMEInstant & Aggressive; Stays Where You Want It
Our legendary, deep-penetrating, fast-action cold blue now comes in a stay-put creme that gives you remarkable control for touch-up application. The sim-ple, wipe-on, wipe-off method works great on a wide variety of steels and provides the solid-black coloring
you need to match gun bluing. Surface preparation is simple and quick. A life saver around the house and the garage as well; try it on any steel you want to give a blue/black finish.SPECS: 4 fl. oz. (118 ml). #082-441-004HA 4 oz. 44/40 Creme 6K06A19 . . . . . . . . $ 9.97#082-441-412HA 12 pak - 4 oz. 44/40 Creme
2H64A18 . . . . . . . . . . . . . . . . . . . . . . . . .105.97Cannot ship outside Continental U. S. Shipped UPS or FedEx Ground only within U.S.
FORMULA
44/40®
INSTANT
GUN BLUEBy Brownells
• Fast, Easy, Wipe-On, Wipe-Off Application
• Original High-Speed Formula
• Deep Penetrating
44/40 has long been one of the cold-blue standards in the indus-try and we here at Brownells are delighted to have purchased the original, high-speed formula and the legendary name and brought it back to its many fans.
44/40’s familiar bluing action is almost magic; simply dampen a patch with 44/40, wipe it on and wipe it off immediately with a dry one. The coloring action happens instantly and the color penetrates deep into the metal for a long-lasting finish. There’s no need to soak or rub for long periods. Surface preparation’s easy, too; for scratches, just clean and degrease as you normally would and apply 44/40. As a blue for external/internal parts and pieces, the procedure is just as easy. Bring the surface to the finish you want, clean it and wipe-on, wipe-off. 44/40 will do the job beautifully. And, it’s great for other jobs around the shop, too. The quick action and dark color makes 44/40 an excellent substitute for traditional layout fluids. The steel is darkened quickly so your layout lines will show up. There’s no surface buildup of “paint” to foul up dimension readings and nothing to peel or flake off. Coat lathe and cutting tools before sharpening so you can see where you’re grinding. Use 44/40 to age brass and copper in restorations, or just to reduce glare and reflection. You can literally do thousands of jobs with 44/40!
You need 44/40 on your bench; the highly active formulation makes sure that you’re going to be able to expertly touch-up virtually any non-stainless gun steel and professionally blend the repair into the original finish.
For the gun shop or store, there’s the proven, “sells-itself” dis-play. It comes with a dozen, 2 ounce bottles of 44/40 in a brightly labeled, attention-getting, countertop display tray, along with a test bottle and a supply of nails so your customers can dip into 44/40 to see how quick and easy it really is. Plus, you get clean-ing patches for the “wipe-off” part of the procedure. Of course, you can buy the two ounce bottles singly as well and, for the gunsmith, 44/40 is available in larger quantities, see below.SPECS: 2 fl. oz. (59 ml), 1 pt. (16 fl. oz./473 ml), 1 qt. (32 fl. oz./946 ml), 1 gal. (128 fl. oz./3.8 L), or 5 gal. (640 fl. oz./18.9 L). Counter Display includes 12, 2 oz. bottles of 44/40, 1, 1⁄2 oz. test bottle, 18 nails and 18 patches, plus molded plastic countertop display. Carton contains 12, 2 oz. bottles. Shipping prepaid on 24 carton single purchase.#082-440-002HA 2 oz. 44/40 6K06A25 . . . . . . . . . . . . . . $ 9.35#082-440-012HA 1 Carton, 44/40 6K75A00 . . . . . . . . . .112.20#082-440-016HA Pint 44/40 2H32A35 . . . . . . . . . . . . . . .48.55#082-440-032HA Quart 44/40 6K44A61 . . . . . . . . . . . . . .59.97#082-440-128HA Gallon 44/40 6K126A05 . . . . . . . . . . .174.97#082-440-640HA *5-Gal. 44/40 6K360A38 . . . . . . . . . . .541.12#082-440-000HA 44/40 Counter Display, 2H80A90. . .121.25
*Requires Additional Hazardous Materials SurchargeCannot ship outside Continental U. S. Shipped UPS or FedEx Ground only within U.S.
Brownells
OXPHO-BLUE®
Finest Professional Cold Blue On The Market - Period!
Originally developed for the occasional bluer who is not equipped to completely polish a gun prior to bluing, Oxpho Blue - because of its ease of application and remarkably superior results - has become a favorite of the professional gunsmith as well. With Oxpho-Blue, all you need do in most cases, is dampen a piece of cotton flannel and give the area a good rubbing. The chemical goes through the oil on the gun, removes thin rust and blues the steel underneath. No after-rust. For looks, the final finish was not intended to approach the beauty of the well-polished, hot-blued gun. It has developed, however, that in the hands of a careful craftsman, not only is the Oxpho-Blue finish beautiful, but it is also more durable and weather resistant than any other known chemical finish!
Oxpho-Blue has other outstanding features worthy of note:
1. Absolutely no after-rust.
2. Phosphate-like surface forms under the blue.
3. Rust removing qualities of the solution, making it unneces-sary to remove mild rust in the usual manner.
4. “Wetting” characteristics of the solution, giving it the abil-ity to penetrate oil, dirt, etc., on the surface of the gun; blue the metal underneath; remove rust and dirt; leave the gun blued and ready for oiling.
5. Beauty and High durability of the finish: Vigorous rubbing with No. 0 steel wool is one of our favorite application meth-ods- the more rubbing, the more brilliant it becomes and, since abrasion is part of the process, normal contact from gun cases, brush and clothing won’t wear your bluing.
(Note: It is possible to get a surface so dense with Oxpho-Blue that water will puddle on it!)
6. For Neighbor Kid and Mr. Average Sportsman, a beat-up gun can be made to look quite presentable by following this recent application technique: Dampen a shoe shine cloth with Oxpho-Blue and blue the gun with a shoe shine motion - without taking too much trouble to remove old dirt, grease, rust, etc. This particular gimmick actually obsoletes all other kinds of bluing for retail sale, for any youngster can make his old man’s gun look quite present-able. For gun club members, neighborhood shooters, etc., one bottle takes care of the lot. (The rub-on feature works wonders on tools and instruments which have been black-ened and show bright along the edges: just dampen a cloth with Oxpho-Blue, rub the bright areas briskly and they are as black as before, but tougher.)
SPECS: 4 fl. oz. (118 ml), 8 fl. oz. (237 ml), pint (16 fl. oz./473 ml) or 1 gal. (128 fl. oz./3.8 L) net contents in plastic bottle.#082-024-004HA 4 oz. Oxpho-Blue 6K07D16 . . . . . . . . $ 9.97#082-024-008HA 8 oz. Oxpho-Blue 6K13D20 . . . . . . . . .19.97#082-024-016HA 16 oz. Oxpho-Blue 2H17D75. . . . . . . .24.97#082-024-128HA Gallon Oxpho-Blue 6K88D34 . . . . . .109.97#082-024-640HA *5 Gallon Oxpho-Blue
6K340D51 . . . . . . . . . . . . . . . . . . . . . . . .449.97*Requires Additional Hazardous Materials Surcharge
Cannot ship outside Continental U. S. Shipped UPS or FedEx Ground only within U.S.
BrownellsCOUNTER DISPLAYS
Easy Sales Of Oxpho Blue®
& Dicropan T-4®
Let Oxpho-Blue’s toughness and T-4’s fast-coloring ability make sales $ for you. You get 12, 4 oz. bot-tles in a shipping case that folds up to make its own eye-catching coun-
ter display. The product sells itself!SPECS: 4 fl. oz. (118 ml) bottles (case of 12).
#082-024-412HA Oxpho Blue Liquid Display, 2H77D27. . . . . . . . . . . . . . . . . . . . . . . $ 104.97
#082-124-412HA Oxpho Blue Creme Display, 2H81U86 . . . . . . . . . . . . . . . . . . . . . . . .109.97
#082-056-412HA T-4 Liquid Display 2H88D58 . . . . . .141.69#082-156-412HA T-4 Creme Display 2H89A90 . . . . . .165.82Cannot ship outside Continental U. S. Shipped UPS or FedEx Ground only within U.S.
BELGIAN BLUEHerter’s Original Formula Blue For Doubles & More
The original Herter’s Belgian Blue formula, now owned by Art’s Gun & Sport Shop, and the results are just as nice as ever. Excellent for soft soldered doubles and for the occasional rebluer who doesn’t want a hot salts bluing setup. Applies easily: Clean the gun thor-oughly, boil the metal in water, remove, wipe dry and gently swab on Belgian Blue, with no slops or runs. Return to the boiling water for a few minutes, remove and card with fine steel wool. Repeat steps until the desired color is achieved. Works on all gun steels except stain-less. Instruction sheet included.SPECS: Pint (16 fl. oz./473 ml) or Quart (32 fl. oz./946 ml).#464-100-016HA Pint Belgian Blue 4F25B84 . . . . . . $ 38.51#464-100-032HA Quart Belgian Blue 4F45B49 . . . . . . . 67.73Cannot ship outside Continental U. S. Shipped UPS or FedEx Ground only within U.S.
Brownells DICROPAN T-4®
Tough, Easy-To-Use, Deep-ColoredProfessional Touch-Up Blue
T-4 is in the catalog because of customer demand. As Maynard Buehler said: “THIS is the BEST yet.” Every time a new gun blue comes on the market, we test it on a piece of gun barrel. We blue three spots: one with the new blue, one with Oxpho- Blue™ and one with T-4. A day later we start rubbing all three areas with steel wool until one of them starts wearing off. So far, Oxpho Blue™ is toughest and T-4 next. However, for ease of application and deep density of color, T-4 is superior. Its ability to touch-up wear and
scratches instantly has made it a favorite. 100% Guaranteed!SPECS: 4 fl. oz. (118 ml), 8 fl. oz. (237 ml),16 fl. oz. (473 ml), 32 fl. oz. (.946 L) or 1 gallon (128 fl. oz./3.8 L) net contents.#082-056-004HA 4 oz. T-4 6K07D58 . . . . . . . . . . . . . . . $ 9.97#082-056-008HA 8 oz. T-4 6K12D30 . . . . . . . . . . . . . . . . .14.97#082-056-016HA 16 oz. T-4 2H16D88 . . . . . . . . . . . . . . . .24.97#082-056-032HA 32 oz. T-4 6K23D02 . . . . . . . . . . . . . . . .29.97#082-056-128HA Gallon T-4 6K86D49 . . . . . . . . . . . . . .109.97Cannot ship outside Continental U. S. Shipped UPS or FedEx Ground only within U.S.
BrownellsOXPHO-BLUE® CREME
Toughest Cold Blue In A No-Run Creme
The same easy application, tough finish and superb results as our liquid Oxpho-Blue with the added benefits of the creme formula. It won’t evaporate away or run off, giving plenty of work time.SPECS: 4 fl. oz. (118 ml) or 16 fl. oz. (473 ml) net contents.#082-124-004HA 4 oz. Oxpho-Blue Creme,
6K07U11 . . . . . . . . . . . . . . . . . . . . . . . . . $ 9.97#082-124-016HA 16 oz. Oxpho-Blue Creme
2H18U55 . . . . . . . . . . . . . . . . . . . . . . . . .24.97Cannot ship outside Continental United States. Ship UPS Ground only within U.S.
BrownellsDICROPAN T-4® CREME
Finest Touch-Up Blue In Stay-Put Creme
T-4 is unsurpassed in its ability to color many different steels almost instantly. The creme formula makes it even better for spot touch-ups…stays where you put it so sur-rounding bluing is unaffected.SPECS: 4 fl. oz. (118 ml), 8 fl. oz. (237 ml), 16 fl. oz. (473 ml) net contents. #082-156-004HA 4 oz. Dicropan T-4
Creme, 6K07U12 . . $ 9.97#082-156-008HA 8 oz. T-4 Creme 6K15U85 . . . . . . . . . .19.97#082-156-016HA 16 oz. T-4 Creme 6K25A81 . . . . . . . . . .34.97Cannot ship outside Continental U. S. Shipped UPS or FedEx Ground only within U.S.
ALUMINUM BLACKFor Black Touch-Up Of Anodized Aluminum
Applies and reacts like Perma-Blue. Ideal for touching up black, anodized aluminum. Used and specified by the Armed Forces and manufacturers of electronic equipment. Produces rich, black fin-ish instantly with no special equipment or skills.SPECS: 3 fl. oz. (89 ml) net contents.
#167-004-170HA Aluminum Black, each 7F05X04 . . . $ 8.40- 3 or More - Aluminum Black, each 7F04X07 . . . . . . . . 8.40Cannot ship outside Continental U. S. Shipped UPS or FedEx Ground only within U.S.
GUARANTEEDSelection • Service • Satisfaction
ARMOR ACCESSORIESBLUE WONDER™
GUN BLUE KITDurability Without Expensive
Equipment; Touch Up Damaged Factory Blue Or Do Whole Guns
Two-part kit achieves a durable, beautiful, blue finish on complete guns or dinged-up areas on damaged ones without expensive equipment. Perfect for professionals that only have one or two guns to refinish and user-friendly enough for the home hobbyist. It’s great for touching up worn, rusted, nicked, or scratched factory bluing because it only sticks to the dam-aged areas, and leaves the good bluing unaffected. The “stop and start” feature allows you to go back and add coats of bluing before the Developer sets, for a deeper, darker finish. The unique process does not use oxidation. Instead, it embeds micronized gold, silver, nickel, copper, and chromium onto the gun’s metal. Experiment for a variety of possible finishes. Blue Wonder requires the use of Blue Wonder Gun Cleaner, which must be purchased separately.SPECS: 1 oz. Kit contains: 1 fl. oz. (30 ml) gun blue, 0.5 fl. oz. (15 ml) developer and 1 oz. cleaner. 2 oz. Kit contains: 2 fl. oz. (59 ml) gun blue, 0.5 fl. oz. (30 ml) developer and 1 oz. cleaner. #100-000-565HA 1 oz. Blue Wonder Kit 6K20D97 . . $ 27.80#100-000-566HA 2 oz. Blue Wonder Kit 6K33D00 . . . 44.00Cannot Ship outside Continental U.S. Ship UPS or FedEx Ground only within U.S.
BLUE WONDER GUN CLEANER - A fast-working, user-friendly gun cleaning product that cuts copper, carbon and lead fouling in bores, removes rust from bluing, and completely eliminates grease and oil. Leaves steel squeaky clean in just minutes!SPECS: 4 fl. oz. (118 ml) net contents.#100-000-567HA Blue Wonder Gun Cleaner,
6K07D50 . . . . . . . . . . . . . . . . . . . . . . . $ 11.12
BrownellsFINGERTIP PUMP DISPENSER
Chemical-Resistant; Meters Beautifully
Polyethylene bottle with stainless steel finger-tip pump allows you to store and meter precise amounts of cold bluing, solvents, and other thin liquids used in the gun shop. Press the non-clog-ging pump head with your fingertip; two small ori-fices disperse minute qualities of liquid into the dish-type cap for application with brush, cotton swab, or a clean cloth. Eliminates waste and contamination.SPECS: Polyethylene w/stainless steel pump. 6 fl. oz. (177 ml).#084-000-166HA Pump Dispenser 4H15P38 . . . . . . . $ 19.97
Brownells SQUEEZE BOTTLESPerfect Cold Blue Dispensers
Get cold blues, cutting oils and lubes out easily, so you’re not tempted to stick a dirty swab back in. Pick-up spouts for drop-by-drop applica-tion, or squeeze the bottle to flood an area.SPECS: Nalgene®. 21⁄2" (6.3cm) dia., 51⁄2" (14cm) tall. 8 fl. oz. (237 ml) capacity. Sold in pairs, Combo has one each.#084-037-001HA Side Spout Bottles 4H08T72 . . . . . $ 12.97#084-037-002HA Top Spout Bottles 4H06T34 . . . . . . . . .9.97#084-037-000HA Squeeze Bottle Combo 4H07T31 . . . .9.97
MARK LEEEXPRESS BLUE #1
EXPRESS BROWN #2Quick & Easy Using Propane Torch
No damp cabinets or long rusting peri-ods required to get good-looking blues and browns. Heat part to 150°-200° F.; swab on solution, and card with soft wire wheel or
fine steel wool. Blue #1 does require parts be immersed in boil-ing water for 5 minutes before carding. Brown #2 gives excellent brown without boiling water; boil for dark brown/black.SPECS: 4 fl. oz. (118 ml) and 16 fl. oz. (473 ml) net contents bottles. Detailed instructions. #575-200-004HA 4 oz. Express Blue #1 5G05H83 . . . . $ 9.50#575-100-004HA 4oz. Express Brown #2 5G05H80 . . . .9.50#575-200-016HA 16 oz. Express Blue #1 5G12H80 . . . 20.00#575-100-016HA 16 oz. Express Brown #2 5G12H80 . 20.00Cannot ship outside Continental U. S. Shipped UPS or FedEx Ground only within U.S.
PILKINGTON CLASSICAMERICAN RUST BLUERich, Authentic Rust Bluing Process
The favorite of custom builder Phil Pilkington who developed it to produce a deep, rich, rust blue that’s so fitting when restoring older guns and high grade, custom shotguns and rifles. No damp cabinet or special equipment required. After two applications of the solution, the parts are left to rust for a few hours, then boiled in water, removed and carded. The process is repeated (immediately or as long as 3-4 days apart) until the desired color and depth are reached. Like any true rust bluing process, there’s no “quick and easy” way to apply it, but then, nothing matches a rust blue finish for classic beauty. The 4 oz. bottle will do many guns. Included with the solution is an excellent 8-page instruction booklet describ-ing all materials needed and the full process in easy steps, plus . . . how to “Fume Blue”, another of Phil’s processes.SPECS: 4 fl. oz. (118 ml) net contents.#703-200-004HA Pilkington Rust Blue 3K00CHD . . $ 32.50Cannot ship outside Continental U. S. Shipped UPS or FedEx Ground only within U.S.
BIRCHWOOD CASEYIMETAL FINISHING PRODUCTSI
SUPER BLACK INSTANT TOUCH-UP PEN - Gloss black or flat black aluminum paint in large size “Magic Marker” with felt tip applicator. Good scratch-filling ability.SPECS: 6" (15.2cm), 1⁄3 fl. oz. (10 ml). #167-004-180HA Casey Gloss Instant Touch-Up, each,
7F03X78 . . . . . . . . . . . . . . . . . . . . $ 6.30- 3 or More - Casey Gloss Instant Touch-Up, per each,
7F02X84 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.30#167-004-190HA Casey Flat Instant Touch-Up, each,
7F03X78 . . . . . . . . . . . . . . . . . . . . . . . . . . .6.30- 3 or More - Casey Flat Instant Touch-Up, per each,
7F02X84 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.30
SUPER BLUE - Deep, blue-black finish. Works with-out degreasing for quick touch-up of scratches or sights. Penetrates hard steel instantly.SPECS: 3 fl. oz. (89 ml) net contents.#167-008-200HA Super Blue, each,
7F04X50 . . . . . . . . . . . . . . . $ 7.50- 3 or More - Super Blue, per each,
7F03X40 . . . . . . . . . . . . . . . . . . . 7.50
PASTE BLUE - Concentrated for deeper color, longer wear. For reblue or touch-up. Won’t dry out.SPECS: 2 fl. oz. (59 ml) net contents.#167-002-200HA Paste Blue, each,
7F03A78 . . . . . . . . . . . . . . . . . .$ 6.30- 3 or More - Paste Blue, per each,
7F03A13 . . . . . . . . . . . . . . . . . . . . . .6.30
PLUM BROWN - For chemically browning antiques and muzzleloaders, and for sportsmen preferring the brown color to black or blue. Easy to use. Gives deep color and metal penetration.SPECS: 5 fl. oz. (148 ml) glass bottle net contents.#167-000-002HA 5 oz. Plum Brown, each,
7F05Z40 . . . . . . . . . . . . . . $ 9.00- 3 or More - 5 oz. Plum Brown, per each,
7F04Z08 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.00
BLUE & RUST REMOVER - Removes old blue and rust. Harm-less to metal. Replaces much hand work when pre-paring guns for rebluing. Provides rust inhibiting film that protects metal up to 72 hours.SPECS: 3 fl. oz. (89 ml) net contents.#167-006-100HA Blue/Rust Remover, each,
7F02X88 . . . . . . . . . . . . . . $ 4.80- 3 or More - Blue/Rust Remover, per each,
7F02X18 . . . . . . . . . . . . . . . . . . 4.80
CLEANER-DEGREASER - Removes completely all grease, oil, dirt, wax, silicone, etc. No harmful fumes, non-flammable. Will not gum up.SPECS: 3 fl. oz. (89 ml) net contents plastic bottle.#167-007-110HA 3 oz. Cleaner/Degreaser,
each, 7F02X88 . . . . . . . . $ 4.80- 3 or More - 3 oz. Cleaner/Degreaser,
each 7F02X18 . . . . . . . . . . . . . . 4.80
PRESTO ® GUN BLUE PEN - Felt-tip-style marker touches-up minor scratches instantly. No waste or mess. Carries easily in the pocket.SPECS: 51⁄2" (14cm) long pen w/ pocket clip cap.#167-132-010HA Gun Blue Pen, each,
7F03P60 . . . . . . . . . . . . . . . . . . . . $ 6.00- 3 or More - Gun Blue Pen, per each 7F02P73 . . . . . . . 6.00
PERMA-BLUE - Penetrates and blues steel in-stantly. For touch-up or complete reblue. Produces a rich, black finish. Highly rust resistant.SPECS: 3 fl. oz. (89 ml) net contents.#167-001-220HA Perma Blue, each,
7F04P16 . . . . . . . . . . . . . . . $ 5.20- 3 or More - Perma Blue, per each,
7F03P14. . . . . . . . . . . . . . . . . . . 5.20BRASS BLACK - Use for touch-up or complete refinishing. For sights, screws, swivels - copper or brass. Is also excellent for permanent marking to identify reloaded cartridge cases. Easy to use. Instant.SPECS : 3 fl. oz. (89 ml) net contents.#167-005-200HA Brass Black, each,
7F05X04 . . . . . . . . . . . . . . $ 8.40- 3 or More - *Brass Black, per each
7F03X81 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8.40Cannot ship outside Continental U. S.. Shipped UPS or FedEx
Ground only within U.S.
BrownellsDICROPAN IM®
ONE-TANK KITNon-Caustic, Hot Water Bluing Systems
To Help You Begin Or Expand Your Bluing Business
Our One-Tank Kit is perfect for the shop with an existing bluing setup, or the beginner with some ingenuity and a tight budget. All the chemicals are here, and we add in a new tank, some safety gear and our detailed instructions. You supply the heat source and a stand for the tank, plus a few other odds and ends. Even better, the price shown represents a savings of more than 15% over purchasing the items individually.DICROPAN IM - (2) Pint Bottles.CLEANER - PreCleaner. (1) 8 lb. box of DicroClean 909 caustic granules (requires a hazardous shipping fee) or 1 gallon of non-hazardous, liquid NH-909 that eliminates ONE of the hazard-ous shipping fees. BLACK IRON TANK - (1) Supplied.THERMOMETER - (1) Supplied.WATER DISPLACING OIL - (2) Quarts. Removes moisture, pre-vents rust.BLUING PARTS BASKETS - (1) 141⁄4" x 55⁄8" x 3". Holds small parts so they don’t get lost.STAINLESS STEEL SCREEN WIRE - (1) Folds into 41⁄2" x 5" x 4" parts basket to keep very small parts off bottom of tank.BLACK IRON WIRE - (1) Roll. Use to suspend parts in tank.TCE DEGREASER - (1) Quart. Removes heavy grease and gunk, plus silicone gun oils, prior to 909 cleaning.N36 RUBBER GLOVES - (1) Pair, size 11 supplied.HYDROCHLORIC ACID - (1) Gallon. Used for Pickle Bath.NEOPRENE SHOP APRON - (1) Keeps chemicals off of you.FULL FACE SAFETY SHIELD - (1) Helps keep chemical splashes out of face and eyes. ALWAYS wear when bluing.GUNSMITH CLEANING PADS - (1) Bag, 100 ct. Used to apply Dicropan IM® or for cleaning and wiping. Very absorbent.#1 STEEL WOOL - (1) Box. For carding between coats of IM.COMPLETE INSTRUCTIONS - Fully detailed, covering every aspect of the Brownells Method for our Dicropan IM Process. #082-905-105HA IM “One-Tank” Kit, with Dicro-Clean 909,
2H235A90 . . . . . . . . . . . . . . . . . . . . . . $ 299.97#082-905-106HA IM “One-Tank” Kit, with NH-909,
2H259A44 . . . . . . . . . . . . . . . . . . . . . . . .299.97Requires Additional Hazardous Materials Surcharge
Cannot Ship C.O.D. Shipped FedEx Ground, UPS Ground or Truck only)Cannot ship outside Continental United States.
NEOPRENE SHOP APRONProtects Against Chemical Splashes
Heavyweight, brown, Neoprene apron pro-tects clothing and skin from the oils, acids, caustics, greases and solvents encountered in the gun shop. The best apron we have seen for jobs involving hazardous chemicals.SPECS: Neoprene. 36" (91.4cm) x 46" (117cm).#100-001-000HA Neoprene Shop Apron,
1Z00HDZ . . . . . . . . . $ 17.45
BrownellsALUMINUM OXIDE
ABRASIVE BLASTING GRITProduces Matte “French Gray” Finishes
By using controlled, abrasive blasting with these extremely fine, aluminum-oxide grits, you can “color”, “texture” or “tone” any metal surface to produce the desired cosmetic effect without washing out detail. Profes-sional instructions included.SPECS: 6 lbs. in screw-top, plastic jar. 15 lbs. in snap-top pail.
STOCK # QUANTITY GRIT PRICE #084-206-060HA 6 lbs. (2.7kg) Ex-Coarse 5L14V50 $ 19.97 #084-212-060HA 15 lbs. (6.8kg) Ex-Coarse 5L32V07 $ 39.97 #084-206-120HA 6 lbs. (2.7kg) Coarse 5L16V03 $ 19.97 #084-212-120HA 15 lbs. (6.8kg) Coarse 5L37V18 $ 49.97 #084-206-240HA 6 lbs. (2.7kg) Fine 5L17V21 $ 24.97 #084-212-240HA 15 lbs. (6.8kg) Fine 5L37V39 $ 49.97
TOLL FREE: 800-741-0015
Brownells
DICROPAN IM®
Professional “Hot Water” Bluing Method
Blues Doubles Beautifully - Without Damaging Ribs
Modern SuccessorTo “Belgian Blue”
& An AlternateTo Hot Caustic
Bluing
New Formula Dicropan IM is truly a multi-purpose bluing solution, serving a definite purpose for both the fully-equipped, high volume, professional shop and also for the gunsmith who has an occasional gun to turn out. The finish is beautiful…a professional blue-black color…sure to please you and your cus-tomers. The process is easy and simple to do, and the equipment required is minimal. For the shop with a hot salts bluing room, Dicropan IM is not intended to replace the caustic salts. After all, once set up, they are the most economical, efficient, and fastest way to blue a lot of guns in a full-time or busy, part-time bluing operation. But, New Formula Dicropan IM does give these shops a safe way to blue all those doubles that come in with soft-soldered ribs which can separate in hot salts. And, it gives a back-up system to use when only one or two guns need to be done and it’s not worth heating up the hot tanks. For the smaller shop or individual who wants to blue an oc-casional gun, Dicropan IM can become their primary bluing system. It can be done just about anywhere with only a couple of tanks and a heat source. It is slower to do than dipping the gun in the hot caustic salts for about 20 minutes…but with only 1 or 2 guns to do, who cares!! Over the years, techniques for applying Dicropan IM have been varied, often complex, and not always successful for some shops. We asked our Chemist to adjust the formula to make it easier to get a perfect job - and did he ever! It’s now more forgiving, less likely to permanently streak, and much, much easier to apply. We then developed a new application technique that works reliably, repeatedly and gives the best, toughest, and longest lasting Hot Water Bluing available. The resulting combination of new formula and new technique is absolutely incredible. The New Formula Dicropan IM is so easy to use and so adaptable…plus, the new application pro-cedure that takes full advantage of these improvements is so foolproof that we highly recommend it to anyone who wants a superior bluing job. New Formula Dicropan IM is safe in your shop and safe for you to use. It contains no caustics, no mercury compounds, has no odor and no harmful fumes. Besides being easy and economical, it truly gives you an outstanding bluing job every time - but you must follow the instructions carefully and completely. Complete instructions for the new application technique are included with each order of New Formula Dicropan IM to be sure that you do it right. In addition, our Tech Support Staff is always available by phone or letter to help you. If you haven’t tried Dicropan IM bluing, wait no longer. We’re sure the new formula, the new technique and absolutely superb results will please you…in fact, we Guarantee it!SPECS: 1 pt. (16 fl. oz./473 ml), 1 qt. (32 fl. oz./946 ml), 1 gal. (128 fl. oz./3.8 L) or 5 gal. (640 fl. oz./18.9 L) net contents in plastic bottle.#082-008-016HA Pint Dicropan IM 2H18Z84 . . . . . . $ 24.97#082-008-032HA Quart Dicropan IM 6K30Z13 . . . . . . .39.97#082-008-128HA Gal. Dicropan IM 6K104Z52. . . . . . 149.97#082-008-640HA *5-Gal. IM 6K441Z75 . . . . . . . . . . . . 599.97
*Requires Additional Hazardous Materials SurchargeCannot ship outside Continental U. S. Shipped UPS or FedEx Ground only within U.S.
BrownellsPREMIUM SHOP APRONS
Top Quality, Custom-Made For The Professional Gunsmith
Made from the best grade, tightly woven, 2-ply yarn, all-cotton duck - the same stuff they make top quality, insulated cover-alls from. Solvent- and oil-proof nylon thread used throughout. Seams rolled, double stitched and finished, all corners and stress points bar-tacked for strength. Everything heavily rein-forced. Machine washes/dries perfectly.
LONG SHOP APRON - Covers from shoul-ders to below the knees to keep dirt/crud off your clothes. Three pockets - cen-tered upper one with sewn-in pencil slot; large lower one on left side. Neck and tie straps are double thickness; every-thing heavily reinforced. Machine washes and dries without edges curling or losing shape.SPECS: 391⁄2" (100.3cm) long, 301⁄2" (77.5cm) wide. Pockets: Upper - 47⁄8" (12.4cm) wide by 43⁄4" (12cm) high with pencil slot. Lower - 73⁄4" (19.7cm) wide by 63⁄4" (17.1cm) high. Ties: each 271⁄2" (69.8cm) long. Neck strap: 213⁄4" (55.2cm) long.#084-071-000HA Brownells Long Shop Apron,
4H17P49 . . . . . . . . . . . . . . . . . . . . . . $ 24.97
SHORT SHOP APRON - Top-quality, custom-made, above-the-knees apron. Unique, continuous loop, “D” ring,
double-thickness strap system automatically adjusts the “bib” for maximum coverage and the length to match wearer’s height. Centered top pocket is sewn solidly to the apron
so it can’t swing and is divided to hold pencils/pens and mike.
Roomy, double, lower pockets. SPECS: 281⁄2" (72.4cm) long. 2" (63.5cm) wide. Pockets: Top, 41⁄8" (10.5cm) wide x 41⁄4" (12cm) high (inside). Lower (x2), 63⁄4" (17.1cm) wide x 61⁄4" (15.9cm) high (inside). Straps: 53" (13.5cm) overall. 40" (101.6cm) after cross joint.#084-071-050HA Brownells Short Shop Apron,
4H17P49 . . . . . . . . . . . . . . . . . . . . . . . . $ 24.97
SCOTT MURRAY®
EXPANDING SANDING DRUMEasy, Fast Grit Changes - Hard Or
Soft Surface In One Unit
Lets you use one drum for all sand-ing steps from rough shaping to fi-nal polishing. Unique, metal flanged, rubber drum expands under rotation to hold sanding belts tight while al-lowing quick, easy grit changes. Can rotate either direction. One way gives a soft face that follows curves and contours; turn over for a harder surface that helps level rough pieces. Re-ally adds flexibility to your buffer.SPECS: With Universal Arbor for 1⁄2" (12.7mm), 5⁄8" (15.9mm), 3⁄4" (10.9mm) and 1" (2.5cm) shafts. Two sizes: 6" (15.2cm) uses 11⁄2" (3.8cm) x 1815⁄16" (48.1cm) belts. 8" (20.3cm) x 3" (7.6cm) uses 3" (7.6cm) x 257⁄32" (64.6cm) belts. Maximum Speed - 1725 rpm. Belt MUST be installed to run.#534-300-006HA 6" Sanding Drum 4C00AVB . . . . . . $ 54.00#534-300-308HA 8" x 3" Sanding Drum
4C00YTP . . . . . . . . . . . . . . . . . . . . . . . . .71.50
WHAT DO I NEED TO POLISH GUNS? Here’s a quick look at the basic supplies for polishing guns.
BASIC EQUIPMENT First, you need something to turn the wheels. You can use salvaged electric motors from a variety of machinery but we like the 1800 RPM BALDOR BUFFER - It’s the number one choice of professional bluing and plating shops. The long shafts get the wheels away from the motor body for good clear-ance. As in cars, more horsepower is always better. It lets you turn a bigger wheel which has a higher surface speed and, therefore, polishes faster. You can bolt the buffer directly to a bench or table but that can limit access around the wheels for odd shaped objects. Our choice for a rock solid mount would be the BALDOR BUFFER PEDESTAL. 6" or 8" STITCHED MUSLIN POLISHING WHEELS - The work-horse wheel of polishing. Use for cleaning and/or roughing with the coarser grits. You’ll need three wheels per grit (glue them together with Elmers, etc.). Power the 6" with 1⁄2 hp mo-tors; a 3⁄4 or 1 hp will turn the 8" nicely.6" or 8" LOOSE MUSLIN POLISHING WHEELS - Softer touch for that final polish with the finer grits. The 90 ply wheel is wide enough for most work without stacking.
POLISHES Of course, you’ll need polishing compound and our POL-ISH-O-RAY™ greaseless polishing compound is made with uniform, screened, mesh size grit for very best results. Except for mirror finishes and aluminum work, P-O-R will do it all. For mirror finishes on steel and soft metals like aluminum and brass, our grease-base, NO. 555™ POLISHES are the best choice. Far easier to work with than tripoli and rouge.
ADDITIONAL HELPFUL TOOLS #12 POLISHING WHEEL BAG. When a wheel set is not in use, protect it from dirt and grit contamination. Build a cabi-net and keep the door shut or toss ’em in one of these bags. When you first mount the new wheels, they will be out of round. In that condition they won’t “take” compound evenly and will bounce when you touch the work to them. True them using the BUFFING WHEEL RAKE. As you polish and remove metal, the wheel surface will load up with metal particles and quit cutting efficiently; clean it and get it ready for fresh pol-ish using the POLISHING WHEEL CLEANING BRICK.
STUFF YOU WON’T WANT TO BUY, BUT REALLY NEED Protect your eyes from flying grit and airborne particles by always wearing a FULL FACE SAFETY SHIELD.POLISHING GLOVES - Soft cotton to keep fingerprints from leaving rust-causing sweat and body oils on polished steel. 3M DISPOSABLE FILTER MASKS - Helps keep harmful pol-ishing dust out of your lungs. Blow your nose after a session without wearing one, if you get black stuff, you need a mask.
SANDING BELTSTo Fit Scott Murray
Expanding Sanding Drums
Resin bonded, aluminum oxide. Sold singly.
STOCK # GRIT SIZE PRICE #925-118-060HA 60 11⁄2"(3.8cm)x1815⁄16"(48.1cm) $ 2.02 #925-118-080HA 80 11⁄2"(3.8cm)x1815⁄16"(48.1cm) $ 1.97 #925-118-120HA 120 11⁄2"(3.8cm)x1815⁄16"(48.1cm) $ 1.93 #925-118-220HA 220 11⁄2"(3.8cm)x1815⁄16"(48.1cm) $ 1.93 #925-118-320HA 320 11⁄2"(3.8cm)x1815⁄16"(48.1cm) $ 1.93 #925-118-400HA 400 11⁄2"(3.8cm)x1815⁄16"(48.1cm) $ 1.93 #925-118-600HA 600* 11⁄2"(3.8cm)x1815⁄16"(48.1cm) $ 3.35 #925-225-060HA 60 2"(5cm)x251⁄2"(64.8cm) $ 2.57 #925-225-080HA 80 2"(5cm)x251⁄2"(64.8cm) $ 2.57 #925-225-120HA 120 2"(5cm)x251⁄2"(64.8cm) $ 2.42 #925-225-220HA 220 2"(5cm)x251⁄2"(64.8cm) $ 2.42 #925-225-320HA 320 2"(5cm)x251⁄2"(64.8cm) $ 2.42 #925-225-400HA 400 2"(5cm)x251⁄2"(64.8cm) $ 2.42 #925-225-600HA 600* 2"(5cm)x251⁄2"(64.8cm) $ 4.20 #925-325-060HA 60 3"(7.6cm)x257⁄32"(64cm) $ 3.15 #925-325-080HA 80 3"(7.6cm)x257⁄32"(64cm) $ 3.00 #925-325-120HA 120 3"(7.6cm)x257⁄32"(64cm) $ 2.92 #925-325-220HA 220 3"(7.6cm)x257⁄32"(64cm) $ 2.92 #925-325-320HA 320 3"(7.6cm)x257⁄32"(64cm) $ 2.92 #925-325-400HA 400 3"(7.6cm)x257⁄32"(64cm) $ 2.92 #925-325-600HA 600* 3"(7.6cm)x257⁄32"(64cm) $ 5.05
* Compact Grain Belt
* About “Compact Grain” Belts - Aluminum Oxide Belts in super-fine grit (like 600) are only available in what the maker calls “Compact Grain”. This process layers grit in a special adhesive and greatly increases belt life. Compact grain belts are easily identified; they are ugly! The 600 grit belt shown looks like it should be a 60 grit but IT ISN’T. It really will give a 600 grit finish and will last extremely well.
SANDING BELTS
Popular Sizes & Grits
Tough, aluminum ox-ide grain, bonded to strong drill cloth with spe-
cial, hi-temp Resinal. Gives excellent finish, resistant to dulling, runs cooler. Particularly suited for metal finishing.
1" (2.5cm) x 30" (76cm) SANDING BELTS
STOCK # GRIT PRICE STOCK # GRIT PRICE #925-130-036HA 36 $ 2.25 #925-130-220HA 220 $ 1.98 #925-130-060HA 60 $ 2.08 #925-130-320HA 320 $ 1.98#925-130-080HA 80 $ 2.08 #925-130-400HA 400 $ 1.98 #925-130-120HA 120 $ 1.98
1" (2.5cm) x 42" (106.7cm) SANDING BELTS
#925-142-036HA 36 $ 2.63 #925-142-220HA 220 $ 2.25 #925-142-060HA 60 $ 2.49 #925-142-320HA 320 $ 2.25 #925-142-080HA 80 $ 2.28 #925-142-400HA 400 $ 2.25 #925-142-120HA 120 $ 2.25 #925-142-600HA 600* $ 3.92
* Compact Grain Belt
2" (5.1cm) x 48" (121.9cm) SANDING BELTS
#925-248-036HA 36 $ 4.08 #925-248-220HA 220 $ 3.32#925-248-060HA 60 $ 3.58 #925-248-320HA 320 $ 3.32 #925-248-080HA 80 $ 3.43 #925-248-400HA 400 $ 3.32 #925-248-120HA 120 $ 3.32
2" (5.1cm) x 72" (182.9cm) SANDING BELTS
#925-272-036HA 36 $ 5.45 #925-272-220HA 220 $ 4.30#925-272-060HA 60 $ 4.70 #925-272-400HA 400 $ 4.30 #925-272-120HA 120 $ 4.30 #925-272-500HA 500 $ 4.30
4" (10cm) x 36" (91cm) SANDING BELTS
#925-436-036HA 36 $ 6.77 #925-436-220HA 220 $ 5.57#925-436-060HA 60 $ 6.00 #925-436-320HA 320 $ 5.57 #925-436-080HA 80 $ 5.57 #925-436-400HA 400 $ 5.57 #925-436-120HA 120 $ 5.57
6" (15.2cm) x 48" (121.3cm) SANDING BELTS
#925-648-036HA 36 $ 12.13 #925-648-220HA 220 $ 9.75 #925-648-060HA 60 $ 10.60 #925-648-320HA 320 $ 9.75#925-648-080HA 80 $ 10.10 #925-648-400HA 400 $ 9.75 #925-648-120HA 120 $ 9.75
CLYMERBARREL SPINNER
Save Polishing Time, Prevent Ripples & Flat Spots
The fastest, slickest way to polish barrels and magazine tubes with no ripples or flat spots. Cheaper than a lathe, with less setup/cleanup time. Just secure the barrel between the non-marring, Delrin® centers, turn on the buffer, and touch the barrel to the buffing wheel or Scott Murray drum. As the barrel spins, slide it across the wheel, varying the angle and pressure to get the best cut.SPECS: Extruded aluminum. Frame - 36" (91.4cm) long, 1" (2.5cm) square. Accepts 32" (81.3cm) barrels. Spinner Centers – Replace-able, in sealed ball bearing. Support Arms - 41⁄2" (11.4cm) x 17⁄8" (4.8cm), socket head lock screws. 11⁄2" (3.8cm) swing.#184-020-000HA Std Barrel Spinner 4H00DZA . . . $ 100.00#184-020-002HA Std Barrel Spinner Centers.
4H00TPU . . . . . . . . . . . . . . . . . . . . . . . . .10.00
BrownellsSCREW HEAD POLISHING/PIN VISE
No More Burnt Fingers Or Lost Screws & Pins
Steel vise securely holds screws and pins in place during polishing to prevent them from flying into the far corners of your shop. Knurled collar tightens evenly, without crushing. SPECS: Steel vise and collar, plastic handle. 4.75" (12cm) long.#080-000-316HA Screw Head Polishing/Pin Vise,
6A15B30 . . . . . . . . . . . . . . . . . . . . . . . . $ 20.40
BALDOR BUFFERS
Heavy-duty, U.S. Made, construction stands up to the tough-est shop use. We recommend the one-horsepower 1800 rpm mo-tor for the gun refinisher. Add the heavy Buffer Pedestal shown below for the ideal setup. All single phase Baldor Buffers come internally wired for 115 Volt, 60 cycle.- Easily changed over to 230 Volt (except 1⁄4 hp.). NOTE: Cord and Plug NOT included.METRIC: 1⁄2" (12.7mm), 3⁄4" (10.9mm), 7⁄8" (22.2mm), 25⁄8" (6.7cm), 63⁄8" (16cm), 73⁄16" (18cm), 161⁄8"(41cm), 27" (68.6cm), 30" (76cm).
Shaft Ext. Overall SPEED ARBOR from Shaft STOCK # HP RPM DIA. End Plate Length PRICE #089-114-332HA 1⁄4 1800 1⁄2 25⁄8" 161⁄8" $256.00 #089-332-000HA* 3⁄4 1800 3⁄4 63⁄8" 27" $504.00 #089-407-000HA* 1 1800 7⁄8 73⁄16" 30" $668.00
*(Note: Standard Shipping for this item is $20.)
BUFFER PEDESTAL - Heavy, stable pedestal keeps buf-fer perfectly steady and gives 360° access to both polish-ing wheels for best polishing results. Exposes both shafts for full 360° polishing on all parts of guns, including bar-rels and receivers. Holds all Baldor Buffers.SPECS: Cast iron. 33" (83.8cm) high. Base 133⁄4" (34.3cm) x 151⁄2" (39.4cm). Top plate is 9" (22.9cm) square.#089-001-000HA *Baldor Buffer Pedestal,
9H00XCH . . . . . . . . . . . . . . . . . . . . . . $ 284.00(Note: Standard Shipping for this item is $30.)
Heavy Shafts
Industrial QualityUsed By
The Professionals
Totally EnclosedMotor
Large Ball Bearings
SCREW HEAD POLISHING VISEPolish Screws& Pins Safely
Superior way to hold screws and pins when polishing heads. Prevents burned fin-gers. Screws won’t be snapped out of grip by wheel and “lost” in shop.SPECS: 53⁄4" (14.6cm) overall. 1⁄4" (6.35mm) max. cap.#345-093-000HA Screw Polishing Vise 5D00AVB . . $ 13.95
POLISHING ARBORS & PILLOW BLOCKSAdd Grinding & Polishing Wheels To Your Shop
Put electric motors to use for grinders, buf-fers, and wheels. #888 for wheels mounted
above bench. #330 lets wheels overhang sides.SPECS: Aluminum alloy base, Sintered bronze bearings. 1⁄2" (12.7mm) RH and LH threaded ends on 5⁄8" (15.9mm) dia. steel shaft. #888: Shaft 71⁄2" (19cm) long. 41⁄2" (11.4cm) above base; 13⁄4" (4.4cm) enclosed pulley. #330: Shaft 12" (30.4cm) long, 7⁄8" (22.2mm) above base; 2" (5cm) exposed pulley. #177-800-888HA #888 Polishing Arbor 7G00ZAY . . . $ 29.94#177-300-330HA #330 Polishing Arbor 7G00AYT . . . . .30.94
ATTACHMENT ARBOR - Converts any 1⁄2" or 5⁄8" shaft electric motor into a polishing/grinding unit. SPECS: 3" (76.2cm) OAL for 1⁄2" (12.7mm) and 5⁄8" (15.9mm) shafts. Both accept wheels up to 3⁄4" (19.1mm) wide with 1⁄2" arbor holes. Die cast. RH thread.#177-606-012HA ½" Attachment Arbor 7G00UAV . . . $ 4.90#177-606-058HA ⅝" Attachment Arbor 7G00XCH . . . . .4.90
#888 #330
Brownells No. 555™ POLISHThree Finer-Than-Fine Cake Polishes For Gorgeous Mirror
Finishes On Steel, Aluminum And More
“Good Old Five-Fifty-Five” as the boys call it. This is the “secret” that master polishers use to give that mirror finish to the gun after Polish-O-Ray™ 500. For the brightest possible finishes, we recommend hard felt, followed by loose muslin for each grit as you progress through them. You can stop with any of the three grits when the desired level of finish is achieved. Suggest you experiment to find the combo and sequence you like best in your shop.SPECS: All packed 3 lb. (1.4 kg) net weight in cardboard tube.
555 BLACK - The coarsest of the three, so you can move to the 555 family sooner. Great as a “Coloring” polish for aluminum after the final sanding steps. Follow with “Gray” on steel, skip to “White” on aluminum.#080-555-004HA 555 Black 8K11C33 . . . . . . . . . . . . . . $ 15.59
555 GRAY - Although extremely “fine”, it’s “coarser” than 555 White. Gray removes 500 P-O-R™ marks while leaving slight marks which clean up with 555 White.#080-555-001HA 555 Gray 8K11C33 . . . . . . . . . . . . . . $ 15.59
555 WHITE - For the absolutely most gorgeous finish you’ve ever seen, follow 555 Gray with this. Often used to buff plated surfaces, this grade takes out 555 Gray marks leaving a mirror finish. Does a nice job on aluminum too.#080-555-002HA 555 White 8K11C33 . . . . . . . . . . . . . . $ 15.59
Brownells WHEEL PREP™
Conditions Your Wheels, Conserves Your Polish
Saves you time and saves your polish. Puts the polish on the wheel and not on the walls or floor. No more fiddling or fooling,with hard to load polishing wheels. Greaseless polishes almost jump on your wheel after a single application of this incredible product. Brownells Wheel Prep is a dark-blue, sizing compound that’s applied after the wheel is trued, but before you apply your greaseless polish. It instantly conditions and prepares the wheel to accept the maximum amount of polish in a single loading. Works on all types of wheels, for greaseless polishes ONLY. Not for use with Brownells 555 or other grease/tallow based polishes.SPECS: Cardboard tube, approximately 11⁄2 lb. (.68 kg) wt.#080-505-000HA Wheel Prep 8K10X16 . . . . . . . . . . . . $ 14.95
Brownells
POLISH-O-RAY®
Shop-Proven Premium-Grade Polish For The Professional
The answer to a gun polisher’s dream! Made to the highest standards of quality with care-fully screened, true-sized grits for reliable, re-peatable results and a natural, greaseless base that doesn’t leave a residue to mess up bluing or plating jobs. Packed in a formed, flexible plastic tube to stay fresh between uses. 1) Unlike hard drying abrasives, Polish- O-Ray sets up to a medium soft surface without flinty hard flakes which, regardless of grit size being used, can do serious damage to a pol-ished surface. 2) It is easily applied to polishing wheels without stopping the motor. Simply press the open end of the tube to your wheel; the polish adheres to the mov-ing surface, hardens in a few seconds and is ready for use. 3) Because of its softer nature, a true, ripple-free surface is quickly obtained on all wheels. The best possible polished sur-face, free from ripples and bounce marks, is your assurance of a superior, professional refinishing job. Polish-O-Ray does this for you. 4) Polish-O-Ray has been used by gunsmiths, metal finishers, and aircraft manufacturers since the early 1940’s. Wherever a quality surface, free from chatter marks, scratch marks and imperfections is required, the use of Polish-O-Ray is a MUST. One precision manufacturer in the southeast orders by the keg. And, where else but on a gun does a perfect finish draw more praise and admiration? These beautiful finishes are the reason for Polish-O-Ray’s continuing popularity among our country’s gunsmiths and serious hobbyists. By following the “Master Metal Polisher’s” technique, it is pos-sible to obtain a top quality finishing job in a minimum of time with P-O-R. Complete instructions are in our Bluing Instruction Booklet (#076-200-113, free) and the book Gunsmith Kinks®. It consists; mainly, of starting with the coarsest grit and polishing the surface in one direction; then, with the next finer grit on a different wheel polishing at 45° angles to the first “pass”. By fol-lowing this procedure down through the finer grit numbers, the final surface is unequaled for quality and perfection. Polish-O-Ray is shipped in a resealable outer bag. Put the tube back in the bag, seal with a twist tie and ALWAYS store all your Polish-O-Ray - brand new or partially used - in the refrigerator for longest life.SPECS: Packed in 21⁄2 lb. (1.1 kg) net contents (min.) plastic tube.#080-505-140HA 140 Polish-O-Ray 8K10C65 . . . . . . . $ 15.51#080-505-240HA 240 Polish-O-Ray 8K10C65 . . . . . . . . .15.51#080-505-320HA 320 Polish-O-Ray 8K10C65 . . . . . . . . .15.51#080-505-400HA 400 Polish-O-Ray 8K10C65 . . . . . . . . .15.51#080-505-500HA 500 Polish-O-Ray 8K12C24 . . . . . . . . .15.41
FORMAXSATIN-GLO POLISHING COMPOUND
Greaseless Compound
For Effortless Polishing
Loads quickly and produces a smooth, great-looking finish without a lot of hard work. Uniform, aluminum oxide abrasive in a water-soluble, glue base removes machine marks, pits and surface imperfections in all types of steel, leaves the parts clean, dry and ready to complete your favorite finish. Conveniently packed in three pound, resealable tubes. For best results, store unused portions of tubes in the refrigerator.SPECS: Packed in approximately 3 lb. (1.4 kg) tubes.#330-100-100HA 100 Grit Satin-Glo Compound
3C00AVB . . . . . . . . . . . . . . . . . . . . . . . . $ 8.93#330-100-150HA 150 Grit Satin-Glo Cmpd 3C00HDZ . .8.93#330-100-220HA 220 Grit Satin-Glo Compound
3C00YTP . . . . . . . . . . . . . . . . . . . . . . . . . .8.93#330-100-320HA 320 Grit Satin-Glo Compound
3C00AVB . . . . . . . . . . . . . . . . . . . . . . . . . .8.93#330-100-400HA 400 Grit Satin-Glo Compound
3C00HDZ . . . . . . . . . . . . . . . . . . . . . . . . . .8.93
POLISHING WHEEL CLEANING BRICKRestores Polishing & Buffing Wheels
Crystolon block quickly knocks off the old caked-on, used-up abrasive and residue from
the surface of muslin, felt and grinding wheels.SPECS: 2" (5cm) high x 2" (5cm) wide x 4" (10.1cm) long.
#657-024-000HA Wheel Cleaning Brick 7E00DZA . . $ 24.94
1" THICK
LOOSE MUSLIN WHEELSEconomical - Equals 41⁄2, 20-ply Wheels
Easy to handle, economical way to set up 1" face wheel. Arbor stitched only. SPECS: 1" (2.5cm) thick; equals 41⁄2, 20-ply wheels. Arbor: 1⁄2" (12.7mm), 5⁄8" (15.9mm), 3⁄4" (19mm), 7⁄8" (22.2mm), 1" (2.5cm). Wheel Dia.: 6" (15.2cm), 8" (20.3cm), 10" (25.4cm). ARBOR 6" $ 12.75 8" $ 17.71 10" $ 23.53 1⁄2" #032-061-500HA #032-081-500HA #032-091-500HA 5⁄8" #032-061-625HA #032-081-625HA #032-091-625HA 3⁄4" #032-061-750HA #032-081-750HA #032-091-750HA 7⁄8" NA #032-081-875HA #032-091-875HA 1" #032-061-001HA #032-081-001HA #032-091-001HA
ORDER ANYTIME!!
brownells.comor call
800-741-0015Order recording lines open 24 hours a day.
VISA/MC/Am Ex/Discover/CrossCheck/IMPAC/C.O.D.
Brownells SISAL WHEEL POLISHThe Right Grit AndBase For Effective
Sisal Wheel Polishing
Get fast cut and color on steel when used with Sisal Wheels. Alumina abrasive and tallow base loads easily and lasts longer without streaking or burning. Fine; Cuts and colors quickly, approximates a #240 Polish-O-Ray™ finish. Medium; for buffing and coloring out in one operation. Coarse; removes scratches and tool marks without excessive polishing.SPECS: Packed in 3 lb. (1.4 kg) cardboard tube.#080-599-100HA Fine Sisal Polish 8K11A50 . . . . . . . $ 15.59#080-599-105HA Medium Sisal Polish 8K11A50 . . . . .15.59#080-599-110HA Coarse Sisal Polish 8K11A50 . . . . . . .15.59
CARDING BRUSHESGUNSMITH CARDING BRUSH - Compact head pro-vides better control. Three rows of soft, .003", stainless steel bristles won’t scratch through existing caustic blued finishes. 7-ply, laminated, hardwood handle.SPECS: .003" (.07mm) diameter bristles, 7⁄16" (11mm) long, 3⁄8" (9.6mm) wide, 13⁄8" (3.5cm) long, 73⁄4" (19cm) long overall.#353-012-003HA Gunsmith Carding Brush
3E00AYT . . . . . . . . . . . . . . . . . . . . . . . . $ 5.23
HAND CARDING BRUSH - Cards light rust from any part without scratching; you can do Dicropan IM™ or rust bluing without a power buffer.SPECS: 121⁄2" (31.7cm.) long, 5⁄8" (15.8mm.) wide, .005" (.13mm.) stainless steel wire bristles. Curved hardwood handle.#084-091-006HA Hand Carding Brush 5A09H34 . . . $ 12.47
.0025" STAINLESS STEELBRUSHING WHEELSSuper-Soft Carding Wheel For
Rust/IM Bluing At Economical Price
Found for us by Ray Hall, Griffith, IN, these baby-soft wire wheels are perfect for
carding between coats when rust bluing, or when using the Hot Water Method with Dicropan IM Bluing Solution. Won’t remove metal, or give satin look.SPECS: 6" (15.2cm) diameter wheels available in 2 row and 4 row. .003" diameter stainless steel wire. Parallel rows of 13⁄4" (4.44cm) long, tufted bristles. 1⁄4" (6.35mm) hole through 2" (50.80mm) di-ameter wood center (drill to fit). 2 row has 3⁄4" (19mm) wide face. 4 row has 11⁄4" (3.17cm) wide face. Maximum RPM 3500.#360-164-581HA 2 Row Brushing Wheels 6C00AVB $ 12.96#360-164-631HA 4 Row Brushing Wheels 6C00HDZ .21.41
BrownellsFELT BOB POLISHING KIT
Eases Polishing Of Odd Shapes &
Tough-To-Reach Places
The 3 each of our 8 most popular sizes and shapes -
for a total of 24 felt bobs.SPECS: Mounted Bobs have 1⁄8"
(3.1mm) shanks. Kit contains 3 each of the bobs listed below plus a compartmented bench box. #080-560-000HA Felt Bob Polishing Kit 8K47H33 . . $ 59.95FELT BOB REFILL PAKS - Paks of three.
MANDREL MOUNTED BOBS#080-560-101HA Square, 1"x½" 8K11H70 . . . . . . . . . $ 14.97#080-560-102HA Square, ½"x⅜" 8K07H78 . . . . . . . . . . . 9.97#080-560-103HA Tapered Cone, 1"x½" 8K10H24 . . . . 14.97
UNMOUNTED BOBS only#080-560-201HA Knife, 1" 8K05H11 . . . . . . . . . . . . . . . . $ 7.49#080-560-202HA Knife, ⅝" 8K03H24 . . . . . . . . . . . . . . . . 3.97#080-560-211HA Square, 1"x¼" 8K03H94 . . . . . . . . . . . . 4.97#080-560-212HA Square, 1"x⅜" 8K09H58 . . . . . . . . . . . 12.47#080-560-213HA Square, 1"x⅛" 8K02H09 . . . . . . . . . . . . 2.99
FELT BOBSMANDREL MOUNTEDGet Into Those Tight Places
Ideal for polishing around triggerguards, cylinder flutes, ramps, hammers, triggers, etc. Made of best hard felt. Use with Polish-O-Ray™.
STOCK # DIA. FACE MANDREL PRICE #839-500-025HA 1⁄4"(6.3mm) 3⁄8"(9.5mm) 1⁄8"(3.1mm) $ 2.48 #839-500-750HA 3⁄4"(19mm) 1"(2.5cm) 1⁄8"(3.1mm) $ 3.81 #839-500-900HA 1"(2.5cm) 2"(5cm) 1⁄4"(6.3mm) $ 7.77
POLISHING GLOVESStop Rust-Causing Fingerprints
Keep your grubby fingerprints off freshly polished steel; and keep your hands cool and clean while polishing. SPECS: Industrial cotton, knit cuff. Sold carton of 12 pr. only.#599-280-012HA 12 pr. Polishing Gloves,
9E00YTP . . . . . . . . . . . . . . . . . . . . . . . $ 15.54
Brownells ”WHEELS-n-POLISH”All You Need To Get Started Right
“What do I need to start polishing guns?” These kits make getting going easy. With them, you can start polishing and the money from those jobs will help pay for a super, top-of-the-line setup. The Kits include both stitched and loose muslin wheels plus two Polish-O-Ray™ grits and instructions that show you how, and when, to use those wheels and grits to achieve the look wanted. WHICH KIT, 6" or 8"? If you have a 1⁄3 or 1⁄2 hp, 1800 rpm motor, buy the 6" Kit. If your 1800 rpm motor has 3⁄4 to 1 hp, pick the 8". (A small motor can’t pull large wheels.)SPECS: Kits contain: 6 Loose Muslin wheels, 6 Stitched Muslin wheels; 1 tube 240 Grit, 1 tube 400 Grit Polish-O-Ray and Instruc-tion Booklet. Wheels are 3⁄8" (9.5mm) thick w/1⁄2" (12.7mm) arbor.#080-724-006HA 6" Polish Kit 8K49V80 . . . . . . . . . . . $ 64.75#080-724-008HA 8" Polish Kit 8K75V28 . . . . . . . . . . . .104.06
Brownells BUFFING WHEEL RAKEFast, Efficient
Truing Of Felt & Muslin Wheels
Seen in use at a major arms maker, designed specifically for truing felt and muslin wheels. Far easier to use and more ef-fective than the traditional wood rasp; a wheel trued with this rake will literally “suck-up” the polish. No need to hand clip the threads on a stitched wheel before truing, the Rake does that for you. The wood handle gives a solid, two-hand hold and light pressure with just two of the four rows of aggressive, steel teeth makes quick work of wheel imperfections. Simplifies reshaping of wheels for special jobs.SPECS: 151⁄4" (38.7cm) lg. Cutting face is 41⁄2" (11.4cm) long x 2" (5cm) wide. Wood handle is 13⁄16" (20.6mm) thick.#082-077-001HA Buffing Wheel Rake 8K24X51 . . . . $ 32.47#082-077-002HA Replacement Rake Teeth,
2H11X17 . . . . . . . . . . . . . . . . . . . . . . . . . .14.97
FELT POLISHINGWHEELSProfessional,
Gunsmith-Proven
Finest quality 1" wide felt wheels, carefully selected and factory trued. (Final touch-up truing may be required.) Only the closely controlled density of felt wheels will give the superb finish that marks the real professional. Complete instructions on Polish-O-Ray™ tube describes felt wheel technique. It is best to use a different wheel for each polish grit. 1⁄2 hp or under, use 6" wheels at 3600 RPM, 1⁄2 hp or over, 8" at 1800, 3⁄4 hp or over can use 10" at 1800. 10" for experienced polishers only. Use the soft felt for most work, medium, or hard wheel for 555™ Polish.SPECS: All are 1" ( 2.5cm) thick. All made with 1" (2.5cm) arbor. Adapters convert to 1⁄2" (12.7mm), 5⁄8" (15.9mm), 3⁄4" (6.4mm) and 7⁄8" (22.2mm). One Adapter supplied with each wheel (except 10"x1".
SOFT FELT POLISHING WHEELS
ARBOR 6" $ 33.52 8" $ 58.69 10" $ 97.60 1⁄2" #088-061-500HA #088-081-500HA NA 5⁄8" #088-061-625HA #088-081-625HA NA 3⁄4" #088-061-750HA #088-081-750HA NA 7⁄8" NA #088-081-875HA NA 1" NA NA #088-091-001HA
MEDIUM FELT POLISHING WHEELS ARBOR 6" $ 46.92 8" $ 79.97 ½" #088-161-500HA #088-181-500HA 5⁄8" #088-161-625HA #088-181-625HA 3⁄4" NA #088-181-750HA 7⁄8" NA #088-181-875HA
HARD FELT POLISHING WHEELS ARBOR 6" $ 49.99 8" $ 92.89 1⁄2" #088-261-500HA #088-281-500HA 5⁄8" #088-261-625HA #088-281-625HA 3⁄4" #088-261-750HA #088-281-750HA 7⁄8" NA #088-281-875HA
MATTE & CARDING WHEELS
Knock Off Rust Do Heavy Carding
RIEHL WHEELS - (.005" wire, max. RPM 4000) preferred for rust or hot water bluing to give soft, wiping action at 500 to 600 rpm.SPECS: 6" (15.2cm) diameter, 1⁄2" (12.7mm) face.
MONITOR WHEELS - (.006" wire, max. RPM 6000) for harsher carding action, or for giving light matte finish. (Not stiff enough to remove rust, scale, or grime from abused guns.)SPECS: 6" (15.2cm) diameter, 1⁄2" (12.7mm) face.
NOTE: DO NOT use the same wire wheel for two different me-tals. The little bits of one metal left in the wheel can transfer to the next metal causing spots and discoloration in bluing and plating baths, or leaving rustable mild steel bits in brushed stainless.
ARBOR - SPECS: 1⁄2" (12.7mm), 5⁄8" (15.9mm), 3⁄4" (19mm), 7⁄8" (22.2mm).
ARBOR6" MONITOR
1G00YTP $ 53.866" RIEHL
1G00ZAV $ 82.311⁄2" #671-210-500HA #671-230-500HA5⁄8" NA #671-230-625HA3⁄4" #671-210-750HA #671-230-750HA7⁄8" NA #671-230-875HA
MUSLIN WHEELSMainstay Of Any Polishing Room For Most Polishing Jobs
Spiral Stitched - used primarily for first cleaning operation on the gun with No. 140 Polish-O-Ray™ to knock off old blue, dirt and rust and bring the metal to a bright finish. Also used by some operators instead of Soft Felt wheels - being of a more flexible nature, great care must be exercised to not round edges, or funnel and elongate screw and pin holes. Loose Muslin - used following each change of grit to smooth out grit marks and prepare the surface for the next finer grit. Also used to finish off the gun just prior to bluing. Note: - Use enough sections to make each wheel as wide as your polishing motor will handle - a minimum of three sections to each wheel. Never try to use the same wheel for different grit numbers. After a wheel is broken-in and in use, mark it with the grit number to be used on it and direction of rotation to be turned. Will increase wheel life, give better finishes and save hours of work.SPECS: Stitched wheels have 3⁄8" (.5mm) face. Loose wheels are 20 ply. Arbor: 1⁄2" (12.7mm), 5⁄8" (15.9mm), 3⁄4" 919mm), 7⁄8" (22.2mm), 1" (22.5cm). Wheel Diameter: 6" (15.2cm), 8" (20.3cm), 10" (25.4mm).
STITCHED MUSLIN WHEELS 6" STITCHED 8" STITCHED 10" STITCHED ARBOR $ 4.16 $ 7.35 $ 8.37 1⁄2" #032-638-500HA #032-838-500HA NA 5⁄8" #032-638-625HA #032-838-625HA NA 3⁄4" NA #032-838-750HA #032-938-750HA 7⁄8" NA #032-838-875HA #032-938-875HA 1" NA #032-838-001HA #032-938-001HA
LOOSE MUSLIN WHEELS 6" LOOSE 8" LOOSE 10" LOOSE ARBOR $ 2.56 $ 3.73 $ 5.27 1⁄2" #032-620-500HA #032-820-500HA NA 5⁄8" #032-620-625HA #032-820-625HA NA 3⁄4" NA #032-820-750HA #032-920-750HA 7⁄8" NA #032-820-875HA #032-920-875HA 1" NA #032-820-001HA #032-920-001HA
STITCHED
LOOSE
TOLL FREE: 800-741-0015
SISAL WHEELSFast Removal Of Rough Metal & Rust
Woven jute with outer muslin cover. Aggressive surface removes rough metal
and rust. Use with fine grits for a “brushed” finish.
SPECS: 6" (15.2cm) for 1⁄2" arbor only, or 8" (20.3cm) dia., both 3⁄8" (9.5mm) wide. 7-ply, spiral stitched.
8" STOCK # ARBOR 8" STOCK # ARBOR #032-837-500HA 1⁄2(12.7mm) #032-837-750HA 3⁄4(19mm) #032-837-625HA 5⁄8(15.9mm) #032-837-875HA 7⁄8(22.2mm)
#032-637-500HA 6" Sisal Wheel 2C00AVB . . . . . . . . . . $ 3.30—Advise #— 8" Sisal Wheel 2C00ZAY . . . . . . . . . . . . . . .3.65
ORDER TOTALSALES TAX(IOWA ONLY)
SHIPPING $p NRA Add-A-Buck for the NRA Round-Up Program
COD/Other Additions to Shipping Charges
GRAND TOTAL
Date Source Code: BLU Your P.O.#
Your Name
Shop Name
Address
City State Zip Code
Billing Address (If this is a new address, please list Old Address Info on back)
Daytime Ph: Extn. Fax E-Mail
SHIPPING INSTRUCTIONS
With our FLAT RATE SHIPPING Policy, just tell us how fast you need it. No zones, no figuring, no hassles. See the yellow Shipping Information pages for details and exceptions. Small package rate available for qualifying orders.
p Master Card p VISA p Discover p American Express p Cash p Check p C.O.D p Money Order
Card # Expires Name Shown on Card
p Check here to authorize us to ship “Balance COD” if your cash, check or money order does not cover the cost of your merchandise.If Out of Stock: p Back Order p Notify p Substitute p Cancel
PAYMENT METHOD
p Standard p Next Dayp 2nd Day
Shipping Address p Same (If new address, please list Old Address Info on back)
Your Name
Shop Name
Address
City State Zip Code
STOCK NUMBER PAGENO. PRODUCT NAME AND DESCRIPTION QTY
UNITPRICE
TOTALPRICE
Order Toll Free: 800-741-0015 Fax: 800-264-3068 Web: brownells.comInternational orders
Phone:641-623-5401 Fax:641-623-3896
200 S. Front St. Montezuma, IA 50171800-741-0015 or 641-623-4000
www.brownells.comWorld’s Largest Supplier of Firearms Accessories and Gunsmithing Tools.™