B01JFER19Y

Bluetooth Sound Bar with Built-In SubwooferBarra de Sonido Bluetooth con Subwoofer IncorporadoBarre Audio Bluetooth avec Caisson de Basse Intégré

English ..................................... 3

Español .................................. 21

Français ................................. 39

3

Welcome Guide • English

Contents:Before getting started, ensure the package contains the following components:

ABluetooth Sound Bar

with Built-in Subwoofer

(SB210)

x1

BRemote Control with two

AAA batteriesx1

CAC power adapter and

cordx1

D AUX 3.5 mm audio cable x1

E RCA audio cable x1

F Optical audio cable x1

GWall mount brackets and

screws - 3.5" (15 mm)x2 each

H Wall mount template x2

4

DiagramSound Bar

Bluetooth indicator

(Front view of sound bar)

(Top view of sound bar)

Standard indicatorDSP sound mode

buttonVolume down

button

News indicator

Movie indicator

Bluetooth button

Audio source button

RCA indicator

AUX indicatorVolume up button

Power buttonOPT indicator

5

DiagramSound Bar

OPTICAL IN RCA IN AUX IN

L R

(Back view of sound bar)

Threaded inserts for

mounting screws

OPTICAL IN audio port

RCA IN L/R port

AUX IN port

DC IN port

6

Important Safety Instructions• Read these instructions and follow all safety instructions.

• Keep these instructions.

• Heed all warnings.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

• Before connecting the appliance to the main power supply, check that the power supply voltage

and current rating corresponds with the power supply details shown on the appliance rating label.

• Never use an appliance that is damaged! Disconnect the appliance from the power supply and

contact your supplier if it is damaged.

• Danger of electric shock! Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such as power-supply cord

or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has been

dropped.

• Warning! Do not use this apparatus near water. Do not operate the appliance with wet hands

or while standing on a wet floor.

• Do not open the appliance casing under any circumstances. Do not insert any foreign objects

into the inside of the casing.

• Only use attachments/accessories specified by the manufacturer. They could pose a safety risk

to the user and might damage the appliance. You must therefore use original accessories only.

• The appliance is only suitable for use at moderate latitudes. Do not use the appliance in tropical

areas or in particularly humid climates.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other devices

(including amplifiers) that produce heat. Always operate the appliance on a clean, dry, level and

stable surface. Protect the appliance against heat and cold, dust, direct sunlight, moisture,

dripping and splashing water.

• This appliance is not intended for use by people (including children) with reduced physical,

sensory, or mental capabilities, or by those who lack experience and knowledge, unless they

have been given supervision and instruction concerning the use of the appliance by a person

responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

7

• This appliance is classified as protection class I and shall be connected to a MAINS socket outlet

with a protective earthing connection.

• Regularly check the power plug and power cord for damage. If the supply cord is damaged, the

adapter cannot be used and needs to be replaced.

• Avoid damage to the power cord. Do not crush, squeeze, bend, or scour on sharp edges.

Keep the power cord away from hot surfaces and naked flames.

• Do not defeat the safety purposes of the polarized or grounding-type plug. Polarized blades

with one blade wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong is provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Lay the cables in such a way that nobody can inadvertently pull them or trip over them.

• Do not pull the plug out of the socket by the power cord, and do not wrap the power cord

around the appliance.

• If an extension cord is used, its capacity needs to be suitable for the power consumed by the

appliance.

• Connect the power adapter to an easily reachable electrical outlet so that the appliance can be

unplugged immediately in case of an emergency. Pull the power adapter out of the electrical

outlet to completely switch off the appliance. Use the power adapter as the disconnection device.

• Disconnect the power adapter from the electrical outlet when not in use and before cleaning.

• Unplug this product during lightning storms or when unused for long periods of time.

• Always switch the appliance off before disconnecting the power adapter.

• Only use this product with the supplied power adapter.

• Attention! In the event of a malfunction as a result of electrostatic discharge and momentary

electrical surges, unplug the appliance and plug it in again.

• Make sure that no electrical wires, water, gas or other lines are located around the installation location.

• Ensure that there is sufficient ventilation. Keep a minimum distance of 4 inches (10 cm) between

the appliance and other objects or walls.

This symbol indicates the compliance with Canadian and USA safety requirements.

For indoor use only.

This symbol indicates the compliance with energy efficiency requirements.

8

Battery Safety Instructions• Do not expose batteries to extreme temperatures, such as, direct sunlight or fire.

• Do not place the remote control on any heat source. Leaking battery acid may cause harm.

• Always insert batteries correctly with regard to the polarities (+ and –) marked on the battery

and the battery compartment.

• Caution! Danger of explosion if batteries are incorrectly replaced.

• Replace batteries only with batteries of the same or equivalent type.

• If batteries should leak, remove them from the battery compartment with a cloth.

• Dispose of batteries according to the regulations. If battery acid has leaked, avoid contact with

skin, eyes and mucous membranes. Rinse affected areas immediately after contact with the

acid and wash with plenty of clean water. Visit a physician.

• Do not allow children to replace batteries without adult supervision.

• Batteries should be stored in well-ventilated, dry and cool conditions.

• Remove the batteries if you will not be using the appliance for an extended period of time.

• Danger of explosion! Battery may not be disassembled, thrown into fire, or short-circuited.

General InformationIntended Use• The sound bar serves as an audio output device with wireless or with wired input connections.

• Read all instructions carefully before beginning set up and installation.

Packaging• Check for the presence of all parts and for transport damage. In case of damage or incomplete

delivery, please contact your dealer.

• Keep all packaging. The sound bar can be stored in packaging if not used for an extended

period of time.

9

Setup InstructionsRemote Control

• Slide the battery compartment cover to open.

• Insert two 1.5 V AAA batteries according to the polarity markings in the battery compartment.

• Close the battery compartment cover.

• Point the remote control directly at the IR sensor on the front of the sound bar at a distance less

than 23 feet (7 m).

CAUTION

• Always insert the batteries according to the correct polarity

markings.

• Use only new batteries of the same brand and quality, or else

leakage may result and cause damage.

• Remove the batteries from the remote control when not in

use for an extended period of time. The remote control could

become damaged if battery leakage occurs.

10

Setup InstructionsRemote Control Command Guide

BUTTON COMMAND

POWERPress to turn on the sound bar. Press again to put the sound

bar in standby mode.

MUTE Press to mute and unmute.

VOLUME + Press to increase volume.

VOLUME — Press to decrease volume.

PREVIOUS Press to return to previous track.

PLAY/PAUSE Press to play or pause.

NEXT Press to move forward to next track.

STANDARDPress for standard Digital Signal Processing (DSP) sound

mode.

NEWS Press for news in DSP sound mode.

MOVIE Press for movies in DSP sound mode.

RCA Press for RCA audio source.

AUX Press for AUX audio source.

OPT Press for OPT audio source.

BLUETOOTHPress to enter Bluetooth input. (For forced pairing, press and

hold for 5 seconds.)

11

Setup InstructionsWall Mounting the Sound Bar

Wall mounting requires four suitable wall plugs and four screws. These are not included.

1. Use the supplied mounting template to mark the mounting position on the wall. Mark the four

screw holes on the wall.

2. Drill the four holes in the wall.

3. Insert suitable wall plugs into the holes. Use a hammer if necessary.

Paper mounting template

Wall

4. Use suitable screws to mount the brackets to the wall. Secure the screws.

NOTICE

12

5. Fasten the two supplied screws to the back of the sound bar.

6. The screw head should extend outward from the back of the sound bar by at least 1/4” (5 mm).

1/4” (5 mm)

7. To hang the sound bar on the mounting brackets, fit the screw heads into the mounting bracket

slots and slide the sound bar down to secure it.

13

Setup InstructionsConnecting the Sound Bar

Connecting the sound bar using external devices• Locate the audio out ports on the back of the external device (such as a TV, DVD, laptop or

other suitable devices), which will be connected to the sound bar. Choose a connection option

on the device. Note: Several devices can be connected at once. Switch the audio source as

needed per device.

Audio connection options for external devices

OPT IN connection

• Insert one end of the optical cable into the OPTICAL IN port on the sound bar. Insert the other

end into the optical audio out port on the external device.

• Change the device’s audio output to PCM format (typically found in audio settings). Refer to the

documentation of the external device for more information.

OPTICAL IN RCA IN AUX IN

Optical audio out port

14

RCA IN connection

• Insert one end of RCA audio cable into the RCA IN port on the sound bar.

• Insert the other end into the RCA audio out port on external device.

OPTICAL IN RCA IN AUX IN

TV

3.5 mm AUX IN connection

• Insert one end of the 3.5 mm AUX audio cable into the AUX IN port of the sound bar.

• Insert the other end in a headphone or AUX out port of the external device.

TV

OPTICAL IN RCA IN AUX IN

Connecting the AC power adapter

After the sound bar is connected to an external audio source, connect the power.

• Insert the AC adapter into the DC IN port on the back of the sound bar.

• Insert AC power adapter cord plug into the fitted port on the AC power adapter.

• Plug the other end of the AC power adapter cord into a power outlet.

15

Setup InstructionsConnecting the Sound Bar

Connecting Sound Bar using Bluetooth• Before using the sound bar with a Bluetooth device, a device must be paired to the sound bar.

Refer to the manual for your Bluetooth accessory if you need more information on how to connect it.

Pairing with devices

• Select the Bluetooth button on the remote control as the input source or select the Bluetooth

button at the top of the sound bar. The blue Bluetooth indicator light on the sound bar will blink

rapidly.

• On the Bluetooth device, navigate to the Bluetooth setting. Turn on Bluetooth and search for

the available device. Note: For additional information on pairing the device, refer to the device’s

documentation.

• On the Bluetooth device, select “Amazonbasics210” from the Bluetooth menu. Repeat step 2 if

“Amazonbasics210” is not displayed.

• If a PIN code is requested, enter “0000”.

• When paring is completed, the Bluetooth indicator light on the sound bar will display solid blue.

name:“BSK20” Name:

“Amazonbasics-210”

NOTICE

16

Setup InstructionsConnecting the Sound Bar

Disconnecting Bluetooth devices

• Turn off the Bluetooth function on the paired device.

Reconnecting to a paired device

When the sound bar is not paired to a device, the Bluetooth indicator light turns off.

• Turn on the sound bar. The sound bar will search for the last connected Bluetooth device and

will reconnect.

• When the Bluetooth device is within 30 feet (9 m) from the sound bar, it will reconnect.

Positioning the sound bar

• Set the sound bar on a flat surface. Do not place it near the edge of a surface to ensure that its

positioning is secure and it will not tip over.

• The sound bar can be mounted on a wall. Please refer to the mount template provided for more

details. Also refer to the chapter “Wall Mounting the Sound Bar “.

Listening to the sound bar

• Press the power button to turn on the sound bar. The power button will turn from red to blue.

• Press the audio source button on the sound bar repeatedly to choose the selected audio

source or use the audio source button on the remote control.

• Press the DSP sound mode button at the top of the sound bar repeatedly to select a sound

mode or use the DSP sound mode button on the remote control. The three DSP sound modes

are: Standard, News or Movie.

• Adjust the volume on the sound bar or remote control to a comfortable level.

• Press the power button again to turn off the sound bar. The power button will turn red.

17

TroubleshootingThe sound bar has no power• Press the power button on the remote control or at the top of Sound Bar.

• Make sure the power cord is securely connected.

• Plug a different device into the electrical outlet to verify that the outlet is working correctly.

The remote control does not work• Remove any obstacles between the remote control and the IR sensor on the sound bar.

• The remote control battery power may be low. Replace the batteries with two new 1.5 V AAA

batteries.

• Move closer to the sound bar. The remote control is only effective at a distance less than

approximately 23 feet (7 m).

• Other remote controls operated at the same time may cause interference.

There is no sound• Increase the volume by using the Volume + button on the sound bar or the remote control.

• Press mute on the remote to ensure that sound bar is not muted.

• Press the source button on the sound bar or remote control to select a different input source.

• If using Bluetooth, turn up the volume on the Bluetooth device.

• If using the AUX 3.5 mm cable connection, make sure the volume is turned up on the sound

source.

• If using optical connection, make sure the source device’s audio source is set to “PCM” format.

Refer to the documentation of the audio source device.

• Make sure the audio cable is not damaged or broken. The audio cable may need to be replaced.

The sound is breaking up or buzzing• Make sure all cables and wires are securely connected.

• Connect to a different source device to see if the buzzing persists. If it does not, the problem

might be with the original device.

• Connect the device to a different input on the sound bar.

• If using optical connection, make sure the source device’s audio source is set to “PCM” format.

Refer to the documentation of the audio source device.

• Make sure the audio cable is not damaged or broken. The audio cable may need to be replaced.

The Bluetooth device keeps unpairing• Shorten the distance between the sound bar and the Bluetooth device.

• Turn the device off, and then turn it back on. Re-pair the sound bar and the Bluetooth device.

• Make sure the device or sound bar is not connected to another Bluetooth device.

• Check that “Amazonbasics210” was selected on the Bluetooth device.

18

FCC – Supplier’s Declaration of Conformity

Unique Identifier B01JFER19Y Bluetooth Sound Bar with Built-In Subwoofer

Responsible Party - U.S.

Contact Information

Amazon.com Services, Inc

Address 410 Terry Ave N.

Seattle, WA

98109, United States

Telephone Number (206) 266-1000

FCC Compliance Statement1. This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

FCC Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

19

Canada IC Notice• This device complies with Industry Canada license-exempt RSS standard(s). Operation is

subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device.

• This equipment complies with Industry Canada radiation exposure limits set forth for an

uncontrolled environment.

Cleaning and MaintenanceWARNING

• Before cleaning, make sure to switch the appliance off and disconnect the power adapter from

the electrical outlet.

• Do not use petrol, alcohol or other abrasive cleansers to clean the exterior.

• Clean only with a dry cloth.

• Do not allow liquids to spill into any openings.

• Use the original packaging if transporting the appliance is necessary.

SpecificationsPower Supply

Input: 100 - 240 V~, 50/60 Hz

Output: 22 V , 2.5 A

Protection class: I

Remote control: 2 x 1.5 V AAA batteries (supplied)

Soundbar

Output power: 10 W x 2 +16 W

Speaker impedance: 4 Ω x 2 (8 Ω)

Frequency response: 150 Hz - 10 kHz

Signal-to-noise ratio:RL: 75 dB

Sub: 64 dB

Dimensions (W x H x D): 31.5 x 3.2 x 3.5 inch (800 x 80.5 x 90 mm)

Weight: 6.8 lb. (3.1 kg)

Bluetooth

Bluetooth version: 2.1 + EDR

Operating range: ≤30 feet (10 meters)

20

Warranty InformationTo obtain a copy of the warranty for this product:

Visit amazon.com/AmazonBasics/Warranty

Contact Customer Service at 1-866-216-1072

amazon.com/AmazonBasics

HECHO EN CHINAFABRIQUÉ EN CHINE

MADE IN CHINA