Embed Size (px)
Citation preview
Certifications and RatingsBlock Series - H1
Dimensions
Rated up to CID1with 130 lumens per watt. The Block - H1 fixture is designed for extreme environments. Available with three power and three beam angles. Bringing design excellence and versatility to hazardous location lighting. The Block Series - H1 is designed for hazardous locations including oil rigs, petroleum refineries, and spirit distilleries.
Specifications
Class I Division 1, Groups C,D Class I Division 2, Groups A,B,C,D
Class II Division 2, Groups F,GClass III
CSA C22.2 No. 137-M1981; 30-M1986CSA C22.2 No. 25-1966
CSA C22.2 No. 250.0-08; 250.13-14 UL 844 Hazardous Locations
UL 1598A Marine VesselsUL 1598 Wet Locations
UL 8750 LED Safety IP66
DLC (Contact Us)ABS (pending)
Voltage/Frequency
Power Factor
THD
Ambient Temperature
T-Code Rating
Warranty
Construction
Lens Material
Hardware
Finish
Connection
Color Rendering Index
L70
Available Optics
Power
Lumen Output
Surge Protection
>99%
-40°F to 140°F (-40°C to 60°C)
Die-cast Aluminum
Tempered Glass
Marine Grade Stainless Steel
Thermoset Powdercoat 3/4” NPT
Ra>70
4KvA
<10%
>50,000 Hours
AC120-277V 50/60HZAC200-480V 50/60HZ
80W 100W 150W
9,855Lm 12,170Lm 18,715Lm
Class I Division 1 - T6Class I Division 2 - T4A Class II Division 2 - T4A
25° 60° 120°
R
Red Sky Lighting LLC410 Main Street Racine, WI, 53403 USA
[email protected] (833) 4REDSKY
LEDs: 10 Years Driver: 7 Years
Pictured with yoke mounting option
13.5in342mm
7.6in193mm
9.5in239mm
10.7in271mm
17.3kg / 38lbs
Weight
Order Information
Accessories
YOKE: Yoke Mount360Y: 360° rotation Yoke MountAVBY: Anti-vibration Yoke Mount STAN: Slip-Fit Stanchion Mount KitSFCB: Safety Cable KitWG: Lens Wire guardSP1: 10KV Surge Protector
BLK-CS-H1-051520-V2
Block Series
BLK
Fixture
80
Wattage80W100W150W
120-277
Voltage120-277200-480
5000K
CCT5000K4000K3000K
120
Beam120°
60°
25°
GREY
ColorGrey
PEND
MountingPendant
CLR
LensClear
H1
RatingH1-CID1
Photometrics
Red Sky Lighting LLC410 Main Street Racine, WI, 53403 USA
[email protected] (833) 4REDSKY
© 2020 Red Sky Lighting LLC All Rights ReservedProduct design and specification is subject to change without notice. See website for most up to date version.
Pendant MountAVBY Yoke360Y Yoke
Yoke Mount with slip-fit stanchion mount
Example: BLK-80-120-277-5000K-120-H1-CLR-GREY-PEND
**
***
*
***
Requires a yoke mounting option***Special Order**Contact us for lead times*
Certifications and RatingsBlock Series - H2
Dimensions
Rated up to CID2, featuring 130 lumens per watt, three power options, and three available beam angles; the Block Series brings versatility, design excellence, and durability to hazardous location lighting. The Block Series is suitable when flammable gases, corrosive vapors, combustible dusts, and other hazards are present.
Specifications
Class I Division 2, Groups A,B,C,D Class II Division 2, Groups F,G
Class IIICSA C22.2 No. 137-M1981; 30-M1986
CSA C22.2 No. 25-1966CSA C22.2 No. 250.0-08; 250.13-14
UL 844 Hazardous LocationsUL 1598A Marine Vessels
UL 1598 Wet Locations UL 8750 LED Safety
IP66DLC (Contact Us)
ABS (pending)
Voltage/Frequency
Power Factor
THD
Ambient Temperature
T-Code Rating
Warranty
Construction
Lens Material
Hardware
Finish
Connection
Color Rendering Index
L70
Available Optics
Power
Lumen Output
Surge Protection
>99%
-40°F to 140°F (-40°C to 60°C)
Die-cast Aluminum
Tempered Glass
Marine Grade Stainless Steel
Thermoset Powdercoat 3/4” NPT
Ra>70
4KvA
<10%
>50,000 Hours
AC120-277V 50/60HZAC200-480V 50/60HZ
80W 100W 150W
9,855Lm 12,170Lm 18,715Lm
Class I Division 2 - T4A Class II Division 2 - T4A
25° 60° 120°
R
Red Sky Lighting LLC410 Main Street Racine, WI, 53403 USA
[email protected] (833) 4REDSKY
LEDs: 10 Years Driver: 7 Years
Pictured with yoke mounting option
13.5in342mm
7.6in193mm
9.5in239mm
10.7in271mm
17.3kg / 38lbs
Weight
Order Information
Accessories
YOKE: Yoke Mount360Y: 360° rotation Yoke MountAVBY: Anti-vibration Yoke Mount STAN: Slip-Fit Stanchion Mount KitSFCB: Safety Cable KitWG: Lens Wire guardSP1: 10KV Surge Protector
BLK-CS-H2-05152020-V2
Block Series
BLK
Fixture
80
Wattage80W100W150W
120-277
Voltage120-277200-480
5000K
CCT5000K4000K3000K
120
Beam120°
60°
25°
GREY
ColorGrey
PEND
MountingPendant
CLR
LensClear
H2
RatingH2-CID2
Photometrics
Red Sky Lighting LLC410 Main Street Racine, WI, 53403 USA
[email protected] (833) 4REDSKY
© 2020 Red Sky Lighting LLC All Rights ReservedProduct design and specification is subject to change without notice. See website for most up to date version.
Pendant MountAVBY Yoke360Y Yoke
Yoke Mount with slip-fit stanchion mount
Example: BLK-80-120-277-5000K-120-H2-CLR-GREY-PEND
**
***
*
***
Requires a yoke mounting option***Special Order**Contact us for lead times*
